Gina Gpo Installation Guide

ADSelfService Plus Client Software Installation Via Group Policy Objects (GPOs)
Contents
Document Summary: .................................................................................................................................... 3 ADSelfService Plus Client Software: .............................................................................................................. 3 ADSelfService Plus Client Software Installation via GPO .............................................................................. 4 Step 1: Create a GPO and name it: ........................................................................................................... 4 Step 2: Configure Script settings to run ReinstallAgent.vbs at startup .................................................. 7 Step 3: Important Settings: ..................................................................................................................... 12 Step 4: Applying the GPO ........................................................................................................................ 14 Testing and Diagnostics: ......................................................................................................................... 19
Document Summary:
This document describes briefly about ADSelfService Client Software, its uses and also illustrates the method to install it using GPO. The document is written with the assumption that you are a system administrator with a basic knowledge of Windows operating system, Active Directory and enterprise software deployment. However, care has been taken to keep the installation steps as simple as possible.
ADSelfService Plus Client Software:

With webbased password selfservice software, end users need not rely on administrators or helpdesk technicians to reset password/unlock accounts anymore. Though it offers them selfreliance, there is still a small element of dependency involved: an endu ser needs to borrow someone elses computer for a brief period to access the selfservice portal. ADSelfService Plus Client Software eradicates such dependencies and offers complete password selfservice abilities to users. It allows endusers to reset password/unlock account right at the Windows logon prompt of their computers. Customizing Microsofts native GINA/CP, this feature adds a button labeled Reset Password/Unlock Account to native Windows logon prompt. Clicking it leads the users to the selfservice website from where password can be reset and/or account can be unlocked. This saves the end users the hassle of seeking other machines to use selfservice portal. ADSelfService Client Software - Compatible with the following Operating Systems: Windows XP Windows Vista Windows 7 Windows Server 2003 Windows Server 2008 Windows Server 2008R2
ADSelfService Plus Client Software Installation via GPO

Important: Before starting with the steps, place the ReinstallAgent.vbs and ADSelfServicePlusClientSoftware.msi files in a network shared folder of the server. ADSelfServicePlusClientSoftware.msi and ReinstallAgent.vbs files are available in bin directory of ADSelfService Plus installation folder. (Default location - C:\Program Files\ManageEngine\ADSelfService Plus\bin). Best Practice: Create a group and add to it all the computers in which you want to install the Client Software. Create a GPO and apply it to this group.
Follow the steps given below in the same sequence for successful installation:
Step 1: Create a GPO and name it:
FOR WINDOWS SERVER 2003

1) Open Active Directory Users and Computers console 2) Right-click the parent container of all the computer objects (which are added to a group refer Best Practice above) and select Properties
3) In the properties dialog box that appears, select Group Policy tab. In this tab, click New to create a Group Policy Object.
FOR WINDOWS SERVER 2008 AND LATER

1) Open Group Policy Management console 2) In the left pane, right-click Group Policy Objects container and select New
3) Give a descriptive name to the Group Policy Object and click OK
Step 2: Configure Script settings to run ReinstallAgent.vbs at startup

1) Now, right-click the Group Policy Object that you have just created and click Edit to open the GPO Editor
2) In the GPO editor, on the right pane, double-click Computer Configuration Windows Settings Scripts (Startup/Shut Down) Startup (For Windows Server 2008 and later, Computer Configuration Policies Windows Settings Scripts (Startup/Shut Down) Startup)
3) Right-click Startup and select Properties
a. In the Startup Properties dialog box, click Show Files
b. Paste the ReinstallAgent.vbs (script) file in the Startup folder window that opens, and then close the window.
c. Click Add in the Startup Properties dialog box.
d. In the Add a Script dialog box do the following: i. Under Script Name, click Browse and select ReinstallAgent.vbs script. ii. Under Script Parameters, enter the parameter (see syntax) and click OK.
Syntax for the parameter WINDOWS SERVER 2003:
WINDOWS SERVER 2008 AND LATER:
Client software customization parameters (optional):
EXAMPLE:
e. You will be back to Startup Properties dialog box. Click Apply first and then click OK to complete the procedure Important: Before setting the parameter, check the accessibility of ADSelfServicePlusClientSoftware.msi.
Step 3: Important Settings:

Once you have completed the above mentioned steps, configure the Administrative Template Settings as shown below: Administrative Template Settings 1) On the left pane of GPO Editor window, go to Computer Configuration Administrator Templates System 2) Under System, configure the following settings: i. Scripts In the right pane of the GPO editor, double-click Run logon scripts synchronously and Enable it. Click Apply, and then OK.
Double-click Maximum wait time for Group Policy scripts and Enable it. Click Apply, and then OK.
ii.
Logon Doubleclick Always wait for the network at startup and logon and Enable it. Click Apply, and then OK.
iii.
Group Policy Doubleclick Group Policy slow link detection and Enable it. Click Apply, and then OK.
Step 4: Applying the GPO

Once the Administrative Template settings are configured, apply the GPO to the desired computers in the network. 1) On the left pane of the GPO editor, right-click on the GPO you are working on (available on the top left corner of the GPO editor), and select Properties.
2) Click Security Tab, in the properties dialog box that appears. IMPORTANT NOTE: In the Security Tab, remember to uncheck Apply Group Policy permission for Authenticated Users before proceeding further.
3) Now, click Add to open the Select Users, Computers or Groups dialog box. There, click Object Types button and make sure Groups is checked, and then click OK.
4) Enter the name of the group (that contains all the computers set for Client Software installation) and click Check Names. Highlight the desired group and click OK to return to the Security tab.
5) The group will now be added to the list of Group or User Names under Security Tab
6) With the newly added group highlighted, apply the following permissions: Read Allow Apply Group Policy Allow Click Apply, and then OK.
7) Reboot the computers to apply the GPO and wait till the next startup for Reset Password/Unlock Account link to appear on the Windows logon screen.
To apply the GPO directly to Computers: In case you prefer to apply the GPO directly to computers instead of the group, please follow the steps given below: a. Follow steps 1 and 2 shown above. b. Click Object Types button. Make sure Computers is checked. Click OK. c. Use Check Names to find the necessary computers. Highlight the desired computers you want to add and click OK to return to the Security tab. d. Set Read and Apply Group Policy permissions to Allow for each and every computer that you just added. IMPORTANT NOTE: After completing all these steps, remember to uncheck Apply Group Policy permission for Authenticated Users. f. Reboot all the client machines.
Testing and Diagnostics:

To test whether the installation was successful: In the command prompt of your client machines, type gpresult /v. Check whether: o the Group Policy Object you configured appears under the subheading Applied Group Policy Objects. o ReinstallAgent.vbs appears under the subheading Startup scripts. Diagnostics: Please check the AdsspScriptlog.txt in the WINDOWS directory (or) Start Run Type in %windir\AdsspScriptlog.txt%

Gina Gpo Installation Guide

Uploaded by

Copyright:

Available Formats

Gina Gpo Installation Guide

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Gina Gpo Installation Guide

Uploaded by

Copyright:

Available Formats

ADSelfService Plus Client Software Installation Via Group Policy Objects (GPOs)

ADSelfService Plus Client Software:

ADSelfService Plus Client Software Installation via GPO

Step 1: Create a GPO and name it:

FOR WINDOWS SERVER 2003

FOR WINDOWS SERVER 2008 AND LATER

3) Give a descriptive name to the Group Policy Object and click OK

Step 2: Configure Script settings to run ReinstallAgent.vbs at startup

3) Right-click Startup and select Properties

a. In the Startup Properties dialog box, click Show Files

c. Click Add in the Startup Properties dialog box.

Syntax for the parameter WINDOWS SERVER 2003:

WINDOWS SERVER 2008 AND LATER:

Client software customization parameters (optional):

Step 3: Important Settings:

Step 4: Applying the GPO

Testing and Diagnostics:

You might also like