40867

CATALOG NO.
630
TM
Secondary Impact Crusher

High crush count with cubical product Low initial investment
Interchangeable wear parts Exclusive rotor lock table for easy serviceability
Adjustable product control Low operating cost
Advanced design, high performance secondary impactor

The field-proven, Stedman Grand Slam secondary impactor will give you years of dependable and profitable service. Innovative features make it superior in performance to any of its type today.
High reduction ratios up to 20:1 Cubical product with high crush count Selective crushing by speed and breaker plate adjustment
Available in 12 low maintenance, minimum downtime models

Recommended for limestone, gravel, slag, glass and asphalt reclamation Capacities from 20 to 700 TPH Units can be portably mounted for ease of transport
Stedmans high capacity secondary impactors are also available in rear opening housings. (As shown above)
Interchangeable breaker bars, breaker plates and side liners for all models
Save by not stocking different wear parts for several machines Side liners have just three shapes Interchangeable breaker bars offered in 2-1/4", 3" or 4" thicknesses and several alloys including hi-chromes, alloy steel or manganese steel Multiple settings provided for breaker bars
Full-length rotor shaft with taper lock mounting for easy on-site servicing
Front breaker plate assembly
Rear door
Design simplicity offers safe, easy access for breaker bar replacement
Unexcelled access provided to all areas of the crushing chamber Front opening feature eliminates need for a crane If preferred, Stedman offers a rear opening housing on all models
2-row, 3-row or 4-row rotors are available depending on rotor diameter. Rotor construction is heavy-duty, open disc, welded, stress relieved and statically balanced. The rotor is mounted on an oversized full-length shaft with taper lock elements between the shaft and the end disks. The shaft is supported by large diameter self aligning spherical roller bearings that are taper sleeve mounted. Bearings are mounted in special Stedman design housings consisting of one piece blocks with cover plates.
Rear breaker plate assembly
Breaker plate assemblies built for real punishment
Rear and side door access
Stedmans Grand Slam provides new, advanced crusher chamber design. Breaker plate assemblies are built to withstand tremendous assault. Heavyduty breaker plates are 3" tapered heat-treated hi-chrome or alloy steel for extended service and superior resistance to highly abrasive feed.
Three doors are standard on larger models.
Unexcelled in throughput
Feed enters the primary crushing chamber and meets the breaker bars which impel the feed against the front breaker plate. This action and the collision of material against new feed results in impact reduction. Material sufficiently reduced in the primary chamber passes by the front breaker plate and enters the secondary chamber for final reduction. Breaker plates are shaft suspended at the front and suspended from a spindle in the rear, allowing for continuous gap adjustment as wear progresses and assuring superior product control.
Spindle
Simple gap adjustment
Rear and side doors permit easy access for gap adjustment when and as required.
Interchangeable side liners
Housing liners Rotor
3-row breaker bar design
Hinged housing 2-row breaker bar design 2" thick side liners are standardized on all models for interchangeability. 3
Breaker bar
Back-up bar
Typical gradations for various feeds

Actual values may change due to mineral characteristics, feed size and rate
Limestone
100
Cumulative percent passing
Gravel
100
90 80 70 60 50 40 30 20
Limestone Feedsize: 8" x 2" Gaps: 3" front; 11/2" rear 7000 FPM 5000 FPM
90 80 70 60 50 40 30 20
Gravel Feedsize: 8" x 2" Gaps: 3" front; 11/2" rear 7000 FPM 5000 FPM
9000 FPM
9000 FPM
10 0 200 100 50
Feed
30
16
4 1/ 4 "
/2" 1"
2"
4"
8"
10 0 200 100 50
Feed
30
16
4 1/4"
/2" 1"
2"
4"
8"
U.S. Standard sieves
Square openings
Square openings
Limestone
100
Gravel
100
90 80 70 60 50 40 30 20 10 0 200 100 50
Limestone Feedsize: 11/2" x 3/8" Gaps: /4" front; /8" rear 7000 FPM
3 3
90 80 70 60 50 40 30 20
Gravel Feedsize: 2" x 1" Gaps: 2 /2" front; 1" rear 7000 FPM 9000 FPM
1
5000 FPM
5000 FPM
9000 FPM
Feed
30
16
4 1/4"
/2"
1"
2"
4"
8"
10 0 200 100 50
Feed
30
16
4 1/4"
/2"
1"
2"
4"
8"
Square openings
Square openings
Asphalt
100
Furnace glass cullet

100
90 80 70 60 50 40 30 20
90 80 70 60 50 40 30 20
Asphalt 7000 FPM
Furnace glass cullet Feedsize: 9" x 3" Gaps: 4" front; 2" rear 5500 FPM
Feedsize: 14" x 2" Gaps: 4" front; 11/2" rear Feedsize: 22" x 2" Gaps: 3" front; 1" rear Feed
Feed
10 0 200 100 50
30
16
4 1/4"
/2"
1"
2"
4"
8"
10 0 200 100 50
30
16
4 1/4"
/2"
1"
2"
4"
8"
Square openings
Square openings
We invite you to test your product in a Grand Slam

Just send us a 1200-1500 lb. sample of your feed for evaluation on full-size equipment in our Size Reduction Testing Plant. For Catalog No. 617, describing our testing capabilities, call 1-800-262-5401 or send an e-mail to: sales@stedman-machine.com.
One-man changeout of breaker bars
Spring bridge
Standard on 30" and 36" dia. rotors, this bridge assures accurate product control. Once the hinged front housing is lowered, the breaker bar retainer plate is removed. The exclusive Stedman rotor lock table, in the foreground, allows horizontal removal of the breaker bars.
Optional shim kit
The rotor lock table slides inside the bracket grooves, contacting the rotor. The back-up bar is completely encircled by the open pipe end and locked with a retaining pin.
Hydraulic shim kits eliminate costly downtime with adjustable gap settings.
Hydraulic pump with all models
Finally, the wedge stop blocks are removed along with the wedges. The breaker bar can then be removed or rotated easily once it is levered outside the housing.
Sized for each model, this pump allows oneman opening of the hinged housing. 5
Grand Slam Specifications1

FRONT OPENING GS REAR OPENING GSR
Height
Height
Length closed Length open
Length closed Length open
Rotor dia.
Rotor width
Width overall
Model Number
GS 3030 3 GS 3630 3 GS 4230 GSR 4260 5 GS 4260 GSR 4860 GS 4860 GSR 5460 5,4 GS 5460 4 GS 5490 4 GSR 6460 5,4 GS 6460 4 GS 6490 4
1 5
Rotor Dia. x Rotor Width Inches

30 x 30 36 x 30 42 x 30 42 x 60 42 x 60 48 x 60 48 x 60 54 x 60 54 x 60 54 x 90 64 x 60 64 x 60 64 x 90
Capacity Range2 TPH

20 - 30 30 - 50 65 - 110 130 - 200 130 - 200 180 - 300 180 - 300 220 - 350 220 - 350 350 - 600 330 - 500 330 - 500 420 - 700
Net Inlet Opening H x W Inches

15 x 31 16 x 31 19 x 31 19 x 61 19 x 61 21 x 61 21 x 61 23 x 61 23 x 61 23 x 91 26 x 61 26 x 61 26 x 91
Height Inches
75 84 94 94 94 100 100 123 123 123 137 137 137
Width (Overall) Inches

77 84 84 114 114 120 120 129 129 159 130 130 162
Length Closed/Open Inches

74 79 87 98 87 109 102 113 108 108 125 120 120 113 127 142 137 142 145 153 162 175 175 180 189 189
Crusher Weight Lbs.

10,500 14,600 18,300 27,500 27,700 33,900 34,100 47,000 46,300 64,400 56,200 56,700 75,300
Technical data subject to change without notice. 2Medium limestone. Throughput capacities vary with material characteristics, feed & product size & breaker bar gap settings. 3Spring bridge standard on these models. 4Hydraulic assist for breaker plate assembly adjustment standard on these models. 5GSR designates rear opening unit.
Originator of the Cage Mill
1-800-262-5401
STEDMAN P.O. Box 299 Aurora, IN 47001 Toll free: 800-262-5401 Fax: 812-926-3482 Email: sales@stedman-machine.com www.stedman-machine.com
105-6465 Printed in U.S.A. Catalog No. 630 Copyright 2005, Stedman Machine Company

40867

Uploaded by

Copyright:

Available Formats

40867

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

40867

Uploaded by

Copyright:

Available Formats

CATALOG NO.

Secondary Impact Crusher

Adjustable product control Low operating cost

Advanced design, high performance secondary impactor

Available in 12 low maintenance, minimum downtime models

Front breaker plate assembly

Rear breaker plate assembly

Breaker plate assemblies built for real punishment

Rear and side door access

Three doors are standard on larger models.

Simple gap adjustment

Interchangeable side liners

Housing liners Rotor

3-row breaker bar design

Typical gradations for various feeds

U.S. Standard sieves

U.S. Standard sieves

U.S. Standard sieves

U.S. Standard sieves

Furnace glass cullet

Asphalt 7000 FPM

U.S. Standard sieves

U.S. Standard sieves

We invite you to test your product in a Grand Slam

One-man changeout of breaker bars

Optional shim kit

Hydraulic pump with all models

Grand Slam Specifications1

Length closed Length open

Length closed Length open

Rotor Dia. x Rotor Width Inches

Capacity Range2 TPH

Net Inlet Opening H x W Inches

Width (Overall) Inches

Length Closed/Open Inches

Crusher Weight Lbs.

Originator of the Cage Mill

You might also like