This document provides instructions for determining the amount of carbon dioxide present in a water sample through titration with sodium hydroxide solution. It explains that carbon dioxide dissolves in water and forms carbonic acid, which dissociates into bicarbonate and carbonate ions depending on the pH. The titration uses phenolphthalein indicator to detect when the pH reaches 8.3, indicating all carbon dioxide has reacted. The amount of sodium hydroxide used corresponds to the amount of carbon dioxide originally present in the water sample.
This document provides instructions for determining the amount of carbon dioxide present in a water sample through titration with sodium hydroxide solution. It explains that carbon dioxide dissolves in water and forms carbonic acid, which dissociates into bicarbonate and carbonate ions depending on the pH. The titration uses phenolphthalein indicator to detect when the pH reaches 8.3, indicating all carbon dioxide has reacted. The amount of sodium hydroxide used corresponds to the amount of carbon dioxide originally present in the water sample.
This document provides instructions for determining the amount of carbon dioxide present in a water sample through titration with sodium hydroxide solution. It explains that carbon dioxide dissolves in water and forms carbonic acid, which dissociates into bicarbonate and carbonate ions depending on the pH. The titration uses phenolphthalein indicator to detect when the pH reaches 8.3, indicating all carbon dioxide has reacted. The amount of sodium hydroxide used corresponds to the amount of carbon dioxide originally present in the water sample.
This document provides instructions for determining the amount of carbon dioxide present in a water sample through titration with sodium hydroxide solution. It explains that carbon dioxide dissolves in water and forms carbonic acid, which dissociates into bicarbonate and carbonate ions depending on the pH. The titration uses phenolphthalein indicator to detect when the pH reaches 8.3, indicating all carbon dioxide has reacted. The amount of sodium hydroxide used corresponds to the amount of carbon dioxide originally present in the water sample.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 4
COURSE NO: CE 332 COURSE NAME: ENVIRONMENTAL ENGINEERING LAB 1
1.50 Credit, 3 Hrs./Week.
Determination of CO2 in Water
CE 332: Environmental Engineering Lab 1
Shams Al-Amin, Lecturer, Dept of CE, AUST
Experiment No 2 Determination of CO2 in Water
Introduction Carbon Dioxide is present in water in the form of a dissolved gas. Surface waters normally contain less than 10 ppm free carbon dioxide, while some ground waters may easily exceed that concentration. Carbon dioxide is readily soluble in water. Over the ordinary temperature range (0-30 C) the solubility is about 200 times that of oxygen. Calcium and magnesium combine with carbon dioxide to form carbonates and bicarbonates. Carbon dioxide does dissolve in water; however the system is somewhat complex. First the CO2 dissolves according to: CO2 (g) = CO2 (l) At room temperature, the solubility of carbon dioxide is about 90 cm3 of CO2 per 100 ml water (cl/cg = 0.8). Any water-soluble gas becomes more soluble as the temperature decreases, due to the thermodynamics of the reaction: GAS (l) = GAS (g). The entropy change, S, of this reaction is positive because the gas molecules are less constrained than the gas molecules in solution. The change in Free energy of reaction with an increase in temperature is S. This effect is particularly large for gases like CO2 that undergo specific reactions with water. Equilibrium is established between the dissolved CO2 and H2CO3, carbonic acid. CO2 (l) + H2O (l) = H2CO3 (l)
Carbonic acid is a weak acid that dissociates in two steps. H2CO3 + H2O H3O+ + HCO3HCO3- + H2O H3O+ + CO32The test for determination of free carbon dioxide in water is based on the titration of water sample with standard Sodium Hydroxide solution in the presence Phenolphthalien indicator. The CO2 reacts with NaOH to form Sodium Bicarbonate with a consequent increase in pH. The reaction of NaOH with free CO2 reache a completion at a pH of 8.3 CO2 + H2O = H2CO3 H2CO3 + NaOH = HCO3- + Na+ + H2O HCO3 -+ NaOH = CO32- + Na+ + H2O
CE 332: Environmental Engineering Lab 1
Shams Al-Amin, Lecturer, Dept of CE, AUST
Environmental Significance Aquatic plant life depends upon carbon dioxide and bicarbonates in water for growth. Microscopic plant life suspended in the water, phytoplankton, as well as large rooted plants, utilize carbon dioxide in the photosynthesis of plant materials; starches, sugars, oils, proteins. The carbon in all these materials comes from the carbon dioxide in water. When the oxygen concentration in waters containing organic matter is reduced, the carbon dioxide concentration rises. The rise in carbon dioxide makes it more difficult for fish to use the limited amount of oxygen present. To take on fresh oxygen, fish must first discharge the carbon dioxide in their blood streams and this is a much slower process when there are high concentrations of carbon dioxide in the water itself. Corrosion is the principal difficulty caused by carbon dioxide. This gas on solution in water produces carbonic acid resulting in lowering of pH. With a decrease in pH corrosive characteristics is induced in water resulting severe corrosion of heat exchanger, pipes, valves etc. Corrosion in boiler system takes place due to the presence of carbonate and bicarbonate although Carbon dioxide is not present in this case. Standards for CO2 Bangladesh Environment Conservation Rules (1997) does not set any limits for the presence of CO2 in water. Reagent 1. Standard N/44 Sodium Hydroxide, 2. Phelophthalein Indicator An indicator is a substance that undergoes a change in color when the end-point of a titration is reached. Acid-base indicators are used to signal the end of acid-base titrations. An acid-base indicator is itself a weak acid (or its conjugate base). Phenolphthalein is a commonly used indicator for titrations, and is a weak acid. The weak acid is colorless and its ion is bright pink. Adding extra hydrogen ions shifts the position of equilibrium to the left, and turns the indicator colorless. Adding hydroxide ions removes the hydrogen ions from the equilibrium which tips to the right to replace them - turning the indicator pink. The half-way stage happens at pH 8.3. Since a mixture of pink and colorless is simply a paler pink, this is difficult to detect with any accuracy.
Procedure (1) Take a 100 ml of sample in a beaker and add 10 drops of Phenolpthalein indicator. If a pink color develops, no carbon dioxide is present in the water sample. (2) Add N/44 sodium Hydroxide solution from a burette to the sample and stir gently until a slight permanent pink color appears as compared with distilled water. Record ml of sodium hydroxide used.
CE 332: Environmental Engineering Lab 1
Shams Al-Amin, Lecturer, Dept of CE, AUST
Since excess CO2, if present easily escapes to atmosphere, so tests should be performed immediately after collection of water sample. If this is not possible sample bottle should be completely filled and stoppered and be kept at a temperature lowar than that at which it was collected.
Calculation Carbon dioxide present (mg/L) = (normality of NAOH * equivalent wt of CO2 * 1000 * milliliter of of N/44 NaOH added) / milliliter of sample taken
Assignment 1. Discuss changes in the form of Carbon in solution at different pH.
2. Why groundwater contains higher carbon dioxide then surface water. 3. Why test for Carbon dioxide should be performed immediately after collection of water sample.
