Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    SCF

    Uploaded by

    msfaizi1
    The document provides instructions for configuring a Nokia Flexi BTS using the Flexi BTS manager software. There are three modes of configuration - easy wizard template commissioning using SCF files for hardware and transmission link configuration, easy wizard complete commissioning, and manual commissioning. During commissioning, the transmission link between the BTS and BSC is established through FIFA (Flexi transmission interface flexbus sub-module). The document also outlines required IP addresses, settings needed at the BSC, and guidelines for transmission network setup between the BSC and BTS.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd

    SCF

    Uploaded by

    msfaizi1
    1K views2 pages
    The document provides instructions for configuring a Nokia Flexi BTS using the Flexi BTS manager software. There are three modes of configuration - easy wizard template commissioning using SCF files for hardware and transmission link configuration, easy wizard complete commissioning, and manual commissioning. During commissioning, the transmission link between the BTS and BSC is established through FIFA (Flexi transmission interface flexbus sub-module). The document also outlines required IP addresses, settings needed at the BSC, and guidelines for transmission network setup between the BSC and BTS.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for configuring a Nokia Flexi BTS using the Flexi BTS manager software. There are three modes of configuration - easy wizard template commissioning using SCF files for hardware and transmission link configuration, easy wizard complete commissioning, and manual commissioning. During commissioning, the transmission link between the BTS and BSC is established through FIFA (Flexi transmission interface flexbus sub-module). The document also outlines required IP addresses, settings needed at the BSC, and guidelines for transmission network setup between the BSC and BTS.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    1K views2 pages

    SCF

    Uploaded by

    msfaizi1
    The document provides instructions for configuring a Nokia Flexi BTS using the Flexi BTS manager software. There are three modes of configuration - easy wizard template commissioning using SCF files for hardware and transmission link configuration, easy wizard complete commissioning, and manual commissioning. During commissioning, the transmission link between the BTS and BSC is established through FIFA (Flexi transmission interface flexbus sub-module). The document also outlines required IP addresses, settings needed at the BSC, and guidelines for transmission network setup between the BSC and BTS.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    SCF :Site Configuration file

    To configure the bts: Nokia Flexi bts manager software is used and in order to connect
    the pc with the bts 10/100 Mbps cable is used.

    There modes of configuration:


    1-Easy wizard template commissioning
    a).SCF for hardware configuration
    b).SCF for Transmission link configuration
    2-Easy wizard complete commissioning
    3-Manual Commissioning

    FIFA stand for Flexi transmission interface flexbus sub-module: During the
    commissioning transmission link is established through FIFA.

    IP Addresses used:192.168.255.130
    Subnet mask used:255.255.255.128
    Dafault Gateway: 192.168.255.129

    BSC settings: the BTS site must already be created at the BSC for commissioning to
    be successfully completed. For instructions on how to create a BTS site at the BSC,
    see Radio Network Administration in BSC/TCSM Product documentation.

    Transmission network setup: the transmission link(s) between the BSC and the BTS
    must already be set up so that there is a transmission path from the BSC to the BTS
    for all the Abis channels. If there are any intermediate transmission hubs between the
    BSC and the BTS, the cross connections in the hubs should either be set up at the
    E1/T1 link level, or at the n x 64 kbit/s level for all the channels to the BTS in an
    E1/T1 link.

    Visual checks and inspection

    Changing IP address settings with Windows


    XP
    Before you start

    Nokia Flexi EDGE BTS supports MDI/MDIX, therefore both a straight-through and a
    cross-over Ethernet cable can be used.

    If you need to commission FIFA and microwave radios, choose the


    Transmission - Launch FlexiHub Manager menu item.

    local management port (LMP)

    The sobriquet is the name of the node in the GCS database, which is used for getting
    the connection parameters needed for the remote connection to the node. The
    sobriquet must be previously defined in the GCS database, and each sobriquet must
    be unique in the database.
    Note that Nokia MetroHopper does not support protected configuration.
    FIFA supports four types of protected configurations with Nokia FlexiHopper (Plus):
    Hot stand-by (HSB), hot stand-by with space diversity,frequency diversity, and
    polarisation diversity.Note that when commissioning hot stand-by (HSB) or hot stand-
    by withspace diversity, all radio settings except TX Power will be common to both
    outdoor units. With frequency diversity protection, however, the TXfrequency must be
    set differently in each outdoor unit. With polarization diversity protection, the
    scrambling polynomial must be different in each
    outdoor unit.

    Note
    UltraSite Easy Wizard files are not compatible with the Flexi EDGE Easy Wizard files.

    Enter the passive unit parameters.


    You can provide information for the existing passive units in the list:
    . FSEA Flexi System External Alarm

    . EWxA EDGE Wideband Combiner

    . FCIA Flexi Indoor Cabinet

    . FCOA Flexi Outdoor Cabinet

    . Other Cabinet

    . FCFA Flexi Cabinet Air Filter

    . FCDA Flexi Cabinet Smoke Detector

    . FCSA Flexi Cabinet Site Support

    . FPMA Flexi Power Module

    FPAA Flexi Power AC/DC sub-module


    . FPBA Flexi Power Battery sub-module

    . FPDA Flexi Power DC/DC Module

    . EMTA 2HU Case

    . EMHA 3HU Case

    . FMCB 2HU Cover

    . FMFA Flexi Mounting Kit

    . WMPB Pole Mounting Kit

    You can also add more passive units to the list by typing the name of
    the unit the Unit Name box. You can specify information for a
    maximum of 20 passive units.

    The following PIUs are supported: Flexi transmission interface E1 asymmetrical sub-
    module (FIEA), Flexi transmission interface E1/T1 symmetrical sub-module (FIPA),
    and Flexi transmission interface Flexbus sub-module (FIFA).

    You might also like