Table of Contents Limited Warranty-Product One Year / Cutter 3 Years

Thank you for your purchase. It is important that you refer to the setup instructions
that pertain to the model you have purchased. WHAT THIS WARRANTY COVERS: This limited warranty covers the original purchase of new prod-
uct used for normal commercial, personal or household use. Office Depot, Inc. (ODP) warrants its
products will be free from defects in materials and workmanship (normal wear and tear excepted),
Warranty & Return Information......................................................... 3 for one (1) year from the date of purchase, except as provided below. ODP shall further provide a
limited warranty on the cutting cylinders of the product for a period of three (3) years from the
Identity Theft Protection Tips for Consumers................................... 4 date of purchase, except as provided below. ODP, at its option, will replace with a comparable
product or with cutting cylinders (as applicable), free of charge, or provide a store credit for the
How to Use Your Shredder approximate retail value of the item as determined by ODP, if the product or cutting cylinders fail
under normal use as a result of such defect.
Setup - Tilt / Pullout basket models.......................................... 5
How to Maintain Your Shredder........................................................ 6 WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply to damage caused
by fire, accident, negligence, misuse, improper cleaning or other circumstances not directly attrib-
Clearing a Jam........................................................................... 7 utable to manufacturing defects.

Overheating............................................................................... 7 LIMITATION OF DAMAGES: ODP PROVIDES THIS LIMITED WARRANTY IN LIEU OF ALL OTHER WAR-
RANTIES EITHER EXPRESS OR IMPLIED. EXPRESSLY EXCLUDED ARE ALL WARRANTIES OF FITNESS
Staples and Paperclips............................................................... 7
FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. ODP’S SOLE OBLIGATION AND THE USER’S
Warnings.............................................................................................. 8 EXCLUSIVE REMEDY UNDER THIS WARRANTY SHALL BE LIMITED TO THE REPLACEMENT AT ODP’S
SOLE DISCRETION AND COST, OF PRODUCT OR COMPONENTS.

IN NO EVENT SHALL ODP, ITS AFFILIATES, SUBSIDIARIES OR PARENT COMPANIES BE RESPONSIBLE

FOR CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES ARISING OUT OF A CLAIM OF DEFEC-
TIVE PRODUCT EVEN IF ODP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

SOME STATES OR PROVINCES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMI-
TATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH MAY VARY BY STATE OR PROVINCE.

THIS WARRANTY APPLIES ONLY TO THE U.S. AND CANADA.

Return Instructions
Please call 1-866-707-9502 for product support and warranty claims.

2 3
Identity Theft Protection Tips for Consumers How to Use Your Shredder
How can you prevent becoming a victim of identity theft? While no one can totally prevent this crime Setup - Tilt / pullout basket models
from occurring, here are some positive steps to take which will decrease your risk.
Install casters on bottom of unit (if applicable). Mount the shredder head securely on the
rim of the cabinet. Insert the inclined receptacle into the cabinet. The elevation on the
1. Carefully destroy papers you throw out. Be especially careful with those containing
front side underneath the receptacle must be fixed exactly inside the corresponding cavity on
sensitive or identifying information. Use your shredder for destroying documents.
the bottom of cabinet. Close the receptacle by simply pushing it toward the cabinet. Connect
2. Check your credit reports at least once a year. the power cord to any standard 120 volt AC outlet.
3. Always guard your Social Security Number (SSN). Don't carry your Social Security Card
with you. Note: Some shredders include a built-in safety mechanism that requires the shredder to be cor-
rectly mounted on the supplied wastebasket and the pullout basket to be completely closed.
4. Do not put your SSN or driver's license number on your personal checks. Lining the wastebasket with a plastic bag will interfere and may keep the shredder from func-
5. Guard all of your personal information. Never give your SSN to anyone unless they tioning properly.
have a good reason for needing it.
Caution: All shredders have very sharp, exposed blades on the underside. Please use care when
6. Watch out for people who may try to eavesdrop to overhear the information you
mounting the shredder on to the cabinet.
give out verbally.
7. Never provide information to telephone solicitors unless you have initiated the call. If your shredder came with casters, they may need to be installed by inserting the pegs into the
8. Immediately delete (and don't reply to) any suspicious email requests, especially if they four holes on the bottom of the cabinet.
are asking for passwords or other unique, identifying information.
SPECIFICATIONS:
9. Use a P.O. Box or locked mailbox for all mail correspondence.
Shredding Capacity: 12 Sheets of 20lb (75 gsm) paper Feed Opening
10. Reduce the number of preapproved credit card offers you receive by calling
1-888-5OPT OUT (they will ask for your SSN). Shred Type: Diamondcut™
Credit Card
11. Request a credit freeze if you live in a state that allows this option. Shred Size: .28 in x 2.01 in (7.2 mm x 51 mm)

Throat Width: 9.03 in (229 mm) Shredder Head

REVERSE

OFF Reverse / On / Off

w/Emergency Stop Switch
AUTO ON / READY

Opening for Trash

CREDIT CARD

Metal Mesh
Shredder Basket

Tilt-Action

Illustration is for reference only.

4 5
 How to Maintain your Shredder How to Maintain your Shredder
Use Shredder Lubricant Regularly Clearing a Jam
• Only use lubricants specifically designed for your shredder, such as shredder lubricant, If paper is not inserted properly into the shredder, or if the sheet capacity is exceeded, a jam may
shredder lubricant sheets or shredder lubrication pouches. result. The shredder will automatically stop until the jam is cleared. Move the switch to the REVERSE
(REV) position, and remove the excess paper from the top and pull it out.
• NEVER use spray lubricants.
TO PREVENT ANY INJURIES, DO NOT PLACE YOUR HANDS NEAR THE FEED OPENING.
• Follow directions on the shredder lubricant, shredder lubricant sheets or shredder Once the paper is cleared, normal shredding operation can resume. If the shredder jams while in
lubrication pouches. reverse, press the switch to the FWD position and let shredder run to clear the jammed paper. If jam
• Do not touch the cutting surface. does not clear, slide the switch back and forth between the REV and FWD until the jam is cleared. If
the jam cannot be cleared following this procedure, unplug the unit and carefully remove the
• Continue to recycle waste paper in a normal manner. jammed paper manually.
When Using Shredder Lubricant Sheets or Pouch
Never tear or open a shredder lubricant sheet. Please, empty waste basket prior to use. Shred one Staples and Paperclips
shredder lubricant sheet by feeding sheet in the direction on the arrows, directly into the paper Shredders are designed primarily to shred paper and single credit cards or CDs (as indicated).
feed entrance as per the instructions that came with your shredder. After shredding the lubricant Although our shredders are safe to shred the occasional standard staple, you should remove them if
sheet run the shredder in reverse for 10 seconds for optimal performance. Align the first lubricant possible. Also, industrial or non-standard, large size staples must be removed. Paperclips should not be
sheet to the left of the shredder throat. The next time you use a shredder lubricant sheet align the shredded at any time, as they significantly reduce the life of the shredder. Please remove staples and
pouch to the right of the shredder throat. Continue to alternate between aligning the pouches to paperclips from paper before shredding.
the left and right to ensure the entire cutting mechanism remains well lubricated. Re-lubricate
your shredder by shredding a lubrication sheet after 30 minutes of shredding, or, a minimum of
twice per month to maintain maximum performance.
When Using Bottled Shredder Lubricant
Apply shredder lubricant directly into the paper feed entrance (Figure 2) and shred paper or
apply a stripe of lubricant across a sheet of paper (Figure 3), then shred the paper as per the
instructions that came with your shredder. After applying lubricant and shredding paper, run
the shredder in reverse for 10 seconds for optimal performance. Reapply lubricant after
30 minutes of shredding or a minimum of twice per month to maintain maximum performance.
Store in a cool dry place. Recycle empty bottle whenever possible or dispose of it in normal trash.

Figure 1 Figure 2 Figure 3

Illustration is for reference only.

6 7
Warnings
• CAUTION: KEEP THIS DEVICE AWAY FROM CHILDREN AND PETS! Place the paper shredder in an
area less accessible to children.

• DO NOT PLACE FINGERS TOO CLOSE TO THE FEED SLOT AS SERIOUS INJURY MAY OCCUR.
Paper shredders can pull children's fingers into the shredder mechanism.

• AVOID GETTING JEWELRY, HAIR OR LOOSE CLOTHING NEAR THE FEED SLOT. If wearing a tie or
long necklace, use caution to keep items away from the shredder opening.

• Connect the cord to any standard 120 volt AC outlet.

• RISK OF FIRE. NEVER dispose of flammable chemicals or materials that have come into contact
with flammable chemicals (for example, nail polish, acetone, gasoline) in the shredder basket.

• ALWAYS turn the shredder off and unplug the power cord from the AC outlet before cleaning
it, moving it, or emptying the wastebasket.

• NEVER place the shredder near water or any heat source.

• ALWAYS keep wastebasket emptied so that the shredder's output is not impeded.

• NEVER use any petroleum based or flammable oils or lubricants in or around the machine as some
oils can combust causing serious injury. Lubricants specifically designed for shredders are acceptable.

• NEVER spray any aerosol-based products in or around the shredder.

• NEVER shred envelopes, labels or anything with glue or any sticky substance as this will lead to
paper jams.

• AVOID shredding paperclips.

• DO NOT use the shredder if the power cord is damaged in any way.

• DO NOT attempt to service this product yourself as doing so may expose you to sharp cutting
blades and/or electricity and will void the manufacturer’s warranty.

• NEVER let the wastebasket get full. This will lead to shredded material being pulled back up
into the shredder and cause jams.

8 9