Compressors

SRP 3000
15 - 100 hp

Rotary Screw

HIGH TECHNOLOGY FOR BETTER RESULTS.

High technology, high performance, and high efficiency: these characteristics are standard in all the products of the Schulz SRP line. This line is the ideal solution for those looking for exceptional performance in applications that require high demand of compressed air in a continuous work environment. Schulz equipment is the latest generation, developed and produced to utilize all the technology and reliability available from the largest manufacturer of air compressors in Latin America. For more than 40 years Schulz has been producing solutions that drive the market.

Full P a

Y EAR
Schulz warranty covers for one year the complete machine, against any manufacture defects. It is not applied to preventive maintenance items and components subject to normal wear, such as filters, oil, belts, valves, among other similar components. For details, see the complete warranty terms inside the Owners Manual.

Air

ge Wa cka

d Warra En

nty

nty rra

YE

ARS

The air end is subject to a five years extended warranty program if the machine is operated and installed according to the manual instructions, serviced only by factory authorized personnel and original parts and oil are used in the compressor. For details, see the complete warranty terms inside the Owners Manual.

PRINCIPAL FEATURES
High efficiency TEFC (IP55) electric motor with 208-230/460V; Automatic starter switch with automatic phase and sequence failure detection; 24V panel commands; Lubricated and robust air-end; Compression unit uses lubricated and robust scews; Low maintenance costs; Low oil carryover; Coolers are on the top of the machine, facilitate heat recovery at the costumers facilities;
Ideal working temperature; Load/partial load/unload control; Designed for use in industrial environment; Easy access for maintenance; Maximum ambient temperature 113 F; Motor overload protection by thermal sensor; Synthetic oil.

1. Air Filter 2. Inlet Valve 3. Oil Filter

11

1 2

4. Belt Transmission 5. Air end

5 12 3 4 6 10 7

6. Air/Oil Separator 7. Main motor - TEFC 8. Air/Oil aftercooler 9. Minimum pressure valve 10. Oil level gauge 11. Electronic controller on models 75 HP and above 12. Thermostatic valve

COMPRESSOR
4
Components and Features
1. Rotors Exclusive combination of rotors (male and female) that allow for high efficiency in the compression process and greater efficiency in the production of compressed air. Manufactured with the highest available technology in the market, it guarantees components of excellent quality. 2. Casings Manufactured by qualified foundry and machining processes with the latest generation of dimensional analysis resources, guaranteeing a greater precision in the manufacture. 3. Bearings Developed to support radial and axial loads to maximize the useful life of the product. 4. Mechanical Seal Designed and built according to the most rigid standards to guarantee a perfect seal of the air end with high reliability.

MICROPROCESSOR CONTROLLED ELECTRONIC PANEL AND OPERATORS INSTRUCTIONS

* Available for Compressors 75 HP and above.

Constant Readings
Delivery pressure; Air end discharge temperature; Work hours; Last 15 errors log; Full load total hours; Partial load total hours; Remaining hours to change the air filter; oil filter and air/oil separator; Remaining hours to change de oil; Date/Time.
Interface: Aircon L1

Operational settings
Operation method load/unload or load/partial load/unload; Remote/local; Week schedule (on/off); Auto restart; Hours to change the air filter, oil filter and air/oil separator; Hours to change the oil; Pressure and temperature units; Starts per hour; Star/delta time; Load and unload pressure; Languages.

Error Messages
Main motor and fan motor overloaded; Phase fault or incorret sequence; Emergency; High pressure; High temperature; Pressure and temperature sensor.

PRODUCTS OF THE SRP LINE

Advantages
SRP 3015

Advantages
Low noise level Low speed; Steel cabinet coated by foam; Noise reduction insulation. Low discharge temperature Oversized cooling system; Longer oil and oil separator life; Compressor prepared to handle higher environment temperatures. Low maintenance costs: Full/partial/unload inlet valves fewer mechanical and flow shocks in the product; Oversized air ends.

3020 3030
SRP 3020|3030

3050
SRP 3050

Low maintenance Synthetic oil; Robust belts; Larger air ends low speed; Oversized MANN separator elements low ppm and longer lifetime. Safety Belt guard;

3075
SRP 3075

Doors with fire retardant plastic coated foam; 24V panel command; Thermal overload protection; Fault and sequence phase relay. Heat exchangers are mounted high in order to facilitate heat recovery.

3100
SRP 3100

SCHULZ ROTARY SCREW COMPRESSOR OPERATION

4 12
NET PRESSURE

7
AIR OIL

Components
AIR/OIL SEPARATOR DIFFERENCIAL PRESSURE

6
AIR AIR + OIL

1. Electric motor; 2. Drive (belts, pulleys); 3. Air end; 4. Inlet valve;

OIL FILTER DIFFERENCIAL PRESSURE

7. Aftercooler; 8. Oil radiator; 9. Oil return line; 10. Thermostatic valve; 11. Oil filter; 12. Return line from the separator element.

10

OIL

5. Air oil tank; 6. Separating element;

11 9

TYPICAL COMPRESSOR INSTALLATION AND COMPRESSED AIR TREATMENT

NET

6 7

2
QUALITY CATEGORIES OF COMPRESSED AIR ACCORDING TO ISO 8573-1
* Optional items that depend upon the air quality required.

QUALITY CATEGORIES
1 2 3 4 5 6

PARTICLES
Sizes in Microns

WATER
Dew point C at 7 bar g

OIL
(including vapor) mg/m3

Compressed Air Station

1. Rotary screw compressor; 2. Separating filter and condenser; 3. Condensate separator; 4. Electronic drain valve; 5. Condensate separator filter; 6. Pre-filter; 7. Air dryer by refrigeration; 8. Outlet filter; 9. Activated carbon filter (by adsorption);

0.1 1 5 15 40 -

-70 -40 -20 +3 +7 +10

0.01 0.1 1.0 5 25 -

TECHNICAL DATA

MODEL

MOTOR POWER hp

MAX. WORKING PRESSURE barg psig

CAPACITY FAD cfm

DISCHARGE CONNECTION IN

NET WEIGHT lbs

WIDTH X HEIGHT X DEPTH

IN

SRP 3015 SRP 3020 SRP 3030 SRP 3050 SRP 3075 SRP 3100

15hp

20hp

30hp

50hp

75hp

100hp

7.5 8.6 11 7.5 8.6 11 7.5 8.6 11 7.5 8.6 11 7.5 8.6 11 7.5 8.6 11

108 125 160 108 125 160 108 125 160 109 131 160 108 125 160 109 125 160

59 54 45 84 79 63 124 112 97 224 212 185 340 313 285 445 400 356

3/4

660

26.7 x 45.6 x 55

3/4

563

31.6 x 40.1 x 52.1

3/4

858

31.6 x 40.1 x 52.1

1,738

37 x 53.9 x 61.4

2,535

39 x 63 x 67

3,966

43.7 x 76.3 x 71.2

www.schulzamerica.com

Company History
With more than 40 years in the market, Schulz is in constant improvement, using the state of the art to achieve the competitiveness requested by the market. In the beginning, its activities were concentrated on the foundry area and, in 1972, it had started manufacturing air compressors.
March 2007

Company History

At first, there were only two compressors models that soon would turn into the largest and most complete line produced in Brazil. In 1984, Schulz products were available throughout the whole of Latin America, Central America and the USA. Following its strategic development plan, in 1989 Schulz had started the production of rotary screw compressors, competing in this market with the biggest worldwide companies. In 1999 the Schulz of America, Inc was created, in Atlanta, Georgia, with a warehouse, sales and technical personnel who were trained at the head office, definitively conquering its share on the North American. Currently, the company possesses a modern industrial unit, with more than 667,000 ft of built-up area, where it develops diaphragm, reciprocating and rotary screw compressors. Improving continuously, perfecting processes and investing in their staff development. Approved by the most demanding international quality certification authorities, it is conquering important markets. Today Schulz is present in more than 60 countries, which reaffirms the excellence and the high technological standards of their products.

Replacement Parts
Schulz has all the replacement parts necessary for the maintenance of all its products. Use only original Schulz parts to obtain the advantages, such as; useful lifetime, safety, warranty and availability of the equipment. The Schulz network of authorized technical support is the best way to obtain genuine replacement parts and factory trained labor. Genuine Schulz parts are the best cost and benefit option.

SCHULZ OF AMERICA, INC.

3420, Novis Pointe | Acworth | GA 30101 Phone # (770) 529.4731 | Fax # (770) 529.4733 sales@schulzamerica.com | www.schulzamerica.com
Accreditation and Certification
essel acco ev

Press ur

rdi

"Certificate of the Mark: Project, Development, Production and Sale of Air Compressors, Air Dryers and Compressed Air Pressure Vessels, Sale of Pneumatic Tools and Accessories for Compressed Air equipment

Care with environment

ng to