Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 197 views

    Sheet 4

    Uploaded by

    Mona Ibrahim
    The document contains 8 problems related to electrical transformers. The problems involve calculating quantities like flux density, induced voltage, currents, efficiency, and voltage regulation given data from open and short circuit tests along with load conditions. The questions require determining parameters of equivalent circuits and performance measures for transformers under different loading scenarios.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Sheet 4

    Uploaded by

    Mona Ibrahim
    197 views2 pages
    The document contains 8 problems related to electrical transformers. The problems involve calculating quantities like flux density, induced voltage, currents, efficiency, and voltage regulation given data from open and short circuit tests along with load conditions. The questions require determining parameters of equivalent circuits and performance measures for transformers under different loading scenarios.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains 8 problems related to electrical transformers. The problems involve calculating quantities like flux density, induced voltage, currents, efficiency, and voltage regulation given data from open and short circuit tests along with load conditions. The questions require determining parameters of equivalent circuits and performance measures for transformers under different loading scenarios.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    197 views2 pages

    Sheet 4

    Uploaded by

    Mona Ibrahim
    The document contains 8 problems related to electrical transformers. The problems involve calculating quantities like flux density, induced voltage, currents, efficiency, and voltage regulation given data from open and short circuit tests along with load conditions. The questions require determining parameters of equivalent circuits and performance measures for transformers under different loading scenarios.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Course Title: Electrical Machines Course Code: EE329

    Sheet #4 Transformers
    1- A single phase transformer has 400 primary and 1000 secondary turns. The net cross sectional area of the core is 60cm2. If the primary winding is connected to a 50 Hz supply at 250V. Calculate: a. Peak value of the flux density in the core. b. The induced voltage in the secondary side 2- A 25 kVA transformer has 500 turns on the primary and 50 turns on the secondary winding. The primary is connected to 3000 V, 50 Hz supply. Find the full load primary and secondary currents, the secondary emf and maximum flux in the core. Neglect leakage drops and no load current. (i.e. consider ideal trasnforrmer) 3- A 250/500 V transformer gave the following test results: S.C. test: Isc = 24 A, Vsc = 10 V, and Wsc = 100 W O.C. test: Io = 1 A, Vo = 250 V, and Wo = 80 W Determine the equivalent circuit parameters and calculate applied voltage and efficiency when the output Is 10 A at 500 V and 0.8 p.f. lagging. 4- A 100 kVA, 6600/330 V, 50 Hz, 1-phase transformer draws 15.15 A and 900 W at 150 V in a short circuit test while it draws 5 A and 4500 W at 6600 V in an open circuit test. The transformer is loaded with 75% its full load at unity power factor with the secondary voltage 330V. Find the transformer efficiency and voltage regulation. 5- In a single phase step up transformer whose nominal turns ratio is 110/550, the following experimental data was obtained from the primary side: O.C. test: O.C. test: V = 220 V, I = 0.5 A, W = 19 W S.C. test: V = 10 V, I = 20 A, W = 100 W If the transformer is connected to a load of (180+j200) with the nominal voltage across the secondary. Find: (a) The primary voltage and current (b) The transformer efficiency (c) The voltage regulation 6- A 100 kW, 220/110 step down transformer has the following parameters: X1 = 0.03 , R1 = 0.02 , R2 = 0.008 , X2 = 0.0075 , X0 = 125 R0 = 250 , If the transformer is supplying 50% full load at unity power factor and nominal secondary voltage, find: (a) The primary voltage and current (b) The transformer efficiency (c) The voltage regulation

    Course Title: Electrical Machines Course Code: EE329

    7- The following results are obtained for a 1-phase 200/400 V, 50 Hz transformer: O.C test: 200 V, 0.7 A, 70 W S.C test: 7.5 V, 20 A, 85 W Calculate primary voltage when the transformer is delivering 5 kW, at 0.8 p.f. lagging, with nominal voltage across the secondary. 8- A 110/220 V step up transformer gave the following experimental data in open and short circuit tests: O.C test: 110 V, 1 A, 20 W S.C test: 10 V, 40 A, 200 W If the transformer is connected to a 220 V, 4 kW, washing machine with a power factor of 0.85 lagging, find: (a) The parameters of the transformer (Zeq & Z0) (b) The primary voltage and current (c) The transformer efficiency

    ==========================

    You might also like