Gents T-Shirts: Ntroduction

Gents T-Shirts
PRODUCT CODE QUALITY AND STANDARDS MONTH AND YEAR OF PREPARATION PREPARED BY : 260313009 : IS 4375:1975 : May, 2003
: Small Industries Service Institute opposite Okhla Industrial Estate, New Delhi-110020.
INTRODUCTION
Garments are classified into woven and knitted wears. Woven fabrics are generally used for the manufacture of structured garments whereas knitted fabrics are generally used for the manufacture of informal/casual wears.Knitted garments are getting wider acceptance because of its easy care and cheapness. Among various types of knitwears, T-Shirts are considered as item of mass consumption and choice of modern society. TShirts with logo of embroidered design is considered as fashion wear. Sports person prefers to wear T-shirts while playing in the track and field because it provides comfort with sweat absorbency. This project report provides general information for setting up a unit for the manufacture of T-shirts of various sizes. The machinery involved in this report is proposed to be imported as well as sourced indigenously.
MARKET POTENTIAL
Knitted shirts and other dresses are common consumer items and havereplaced other textile apparels because of their flexible design, durability and easy care properties. Due to its cheaper rates combined with durability, the demand for knitted dresses is increasing exponentially. Earlier this item was considered as casual wear but now this phenomenon has changed drastically and it is being considered as formal wear. It is presumed that marketing of T-shirts with better quality will not be a major threat to this industry.
BASIS AND PRESUMPTIONS

This project is prepared on the following assumptions: Number of working Number of working days is considered at 300 working days in a year. The rental value indicated in the project is Rs. 20 per sq. mt. It may be less in small cities and backward area.Costs of machinery and equipment/material indicated refer to a particular make and approximately to those prevailing at the time of preparation of this project and are likely to vary from supplier to supplier and place to place.Installation and electrification expenditure is taken @ 10% of cost of machinery and equipment. Non-refundable deeposits,project report cost, trial production,security deposits with Electricity Board are considered under preoperative expenses. Depreciation has been taken at 10% on plant and machinery, 20% on office furniture and fixtures and 20% on other fixed assets. Interest rate on capital loan is taken as 14% per annum.
IMPLEMENTATION SCHEDULE
Time period (in months) required for executing the project from preparation of project report to starting the trial run production will be of 6 months period approximately. Considering that some of the many activities may be overlapping and can be done at same time, the project implementation will take a total period of five months approximately for starting the actual production.
TECHNICAL ASPECTS
Process of Manufacture
Raw material i.e. polyester/cotton yarn in cones are placed directly on the circular knitting machine for producing tubular fabric. After sufficient length of fabric is knitted, fabric is cut and taken out and sent to dyeing house for imparting required colour and finishing.The cloth after receiving is cut into desired shape and size and stitched to make T-shirts. Stitched portions are overlocked on overlocking machines.These stitched garments are checked for any defects to remove them before sending to washing section. All garments are charged into washing machine containg mild detergents and washed for 4 hours in order to remove dirt and stains acquired during the manufacturing process. After washing, the garments are hydroextracted to remove excess water and after this, they are dried in the tumbler dryer. Final inspection is done to check the measurement and packed as per the customers choice.
Quality Control and Standards

Generally these are made as per customers specification in respect of size, design and fashion. However, care should be taken in each stage of production to maintain quality.
Production Capacity (per annum) Product

Knitted T-Shirts
Quantity (pcs)
1, 90,000
Amount (Rs.)
1,61,50,000
Motive Power
29 H P of power is required for running this unit.
Pollution Control
Although not required, however,entrepreneurs are to contact State Pollution Control Board for necessary guidance.
Energy Conservation
Maximum care should be taken while selecting the machinery and other electrical equipments so as to minimise the wastage of energy.
FINANCIAL ASPECTS
A. Fixed Capital
(i) Land and Building Building area Factory shed Store (Raw material) Office etc. Total covered area Rent (per month) 400 sq. mt. 25 sq. mt. 25 sq. mt. 450 sq. mt. Rs. 9,000
(ii)
Machinery and Equipments
Sl. No.
1.
Description
Power operated interlock knitting machine 24G 30" dia 24 feeder with needles and accessories with electric motor attachment Power operated interlock knitting machine 20G 17" dia 16 feeder with needles and accessories with electric motor attachment Power operated interlock knitting machine 14G 15" dia 14 feeder with needles and accessories with electric motor attachment Cutting Machine (power-operated) 4 thread overlock machine with electric motor and accessories Flat lock stitch machine (5 thread) with table and electric motor attachment Lock stitch (sewing Machine) with table, 4
No.
1,50,000
Rate
(In Rs.)
Amount
(In Rs.) 6,00,000
2.
74,000
2,96,000
3.
75,000
3,00,000
4.
65,000
65,000
5.
70,000
5,60,000
6.
24000
96000
7.
20
5,000
100,000
motors and accessories 8. 9. Potable steam press Wooden frame, pressing boards, cutting tables, stools etc. Workshop Accessories Total 3 LS 23,000 1,00,000 69,000 1,00,000
10.
LS
20,000
20,000
22,06,000
(iii) Other Fixed Assets

(a) Erection and installation (b) Office furniture (c) Pre-operative expenses Total Total Fixed Capital
(Rs.)
1,66,100 25,000 20,000 2,11,100 24,17,100
B. Working Capital (per month)

(i) Staff and Labour Wages
Sl. No.
1. 2. 3. 4.
Designation
Manager Clerks/Typist
Nos.
1 2 1 1 Total
Rate (Rs.)
8000 3500 3500 2500
Amount (Rs.)
8000 7000 3500 2500 21000
Store-keeper Peon/Watchman
Production Staff
1. 2. 3. 4. 5. Cutting Master Skilled workers Pressing man Semi-skilled workers Helpers 1 40 3 6 4 Total Perquisites@ 20% G.Total 7000 3,500 2,500 2,500 2,250 7000 1,40,000 7,500 15,000 9,000 1,78,500 39,900 2,39,400
(ii) Raw Material (per month)
Sl. No.
1
Description
Polyester/cotton yarn dyed or bleached (Kgs) Cotton Sewing thread
Qty. Unit
5,000
Rate/ (Rs.)
150
Amount (Rs.)
7,50,000
2. 3.
LS LS
14,000
14,000 65,000
Trims and embellishments (including collar)
4. Washing detergents
LS
2,500
Total
8,31,500
(iii) Utilities (per month)

Electricity, Water charges
(Rs.)
16000
Total
16,000
(iv) Other Contingent Expenses (per month)

(a) Rent (b) Postage/Stationery (c) Repair and maintenance (d) Transport/travelling charges (e) Insurance (f) Telephone (g) Miscellaneous expenses
(Rs.)
9,000 500 13,842 1,000 700 2,000 3,000
Total
(v) Total Recurring Expenses (per month) (vi) Total Working Capital for 3 months
30,042 Rs. 11,16,942
Rs. 33,50,825
C. Total Capital Investment

(i) Machinery and equipment (ii) Working capital for 3 months Rs. 24,17,100 Rs. 33,50,825
Total
Rs. 57,67,925
MACHINERY UTILISATION
Capacity utilisation is considered in this project as 75% of installed capacity.
FINANCIAL ANALYSIS
(1) Cost of Production (per year)

Recurring expenses Depreciation on machinery @ 10% Depreciation on office furniture and equipment @20% Interest on total investment @14% Total
(Rs.)
1,34,03,300 1,66,100
29,000 8,07,509
1,44,05,909
(2) Turnover (per year)
Pcs.
T-Shirts 1,90,000
Rate (Rs.)
85
Amount (Rs.)
1,61,50,000
Total
1,61,50,000
(3) Net Profit (per year) (4) Net Profit Ratio (Net profit/ Turnover per year)
Rs. 17,44,091 10.70%
(5) Rate of Return on Investment (Net Profit/Total Capital Investment) (6) Break-even Point
30%
Fixed Cost
Rent Depreciation Interest on capital investment
(Rs.)
1,08,000 1,95,100 8,07,509
Fixed Cost
40% of wages of staff and labour 40% of other expenses Insurance Total B.E.P. FC 100 = FC+profit
(Rs.)
11,49,120 97,642 8,400 23,65,771
2365771 100 = 2365771+1744091 = 57%
Addresses of Machinery and Equipment Suppliers

1. M/s. Paras Special Machine Co. Madhopur Kucha No. 7, Rohan Road,Ludhiana. 2. M/s. Vijay Sewing (P) Ltd. 17-D, Everest House, 46-C, Chowringhee Road, Kolkata. 3. M/s. Industrial Machines Pvt. Ltd. 1/23 B, Asaf Ali Road, New Delhi-110002 4. M/s. Apparel and Leather Techniques Pvt. Ltd. Kaikondanahalli, Sarjapur Road, Near Bellaandur Gate, Bangalore-560035. 5. M/s. Industrial Sewing Systems 30 Ramakrishna Street, North Usman Road, T. Nagar, Chennai.
Addresses of Raw Material Suppliers

1. M/s. Vardhman Threads, Mahavir Spinning Mills Ltd. Chandigarh Road,Ludhiana. 2. M/s. Powerloom Cloth Manufacturing Centre Erode, Bhiwandi, Mumbai, Surat etc.

Gents T-Shirts: Ntroduction

Uploaded by

Copyright:

Available Formats

Gents T-Shirts: Ntroduction

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Gents T-Shirts: Ntroduction

Uploaded by

Copyright:

Available Formats

Gents T-Shirts

BASIS AND PRESUMPTIONS

Quality Control and Standards

Production Capacity (per annum) Product

Machinery and Equipments

(iii) Other Fixed Assets

B. Working Capital (per month)

(ii) Raw Material (per month)

Trims and embellishments (including collar)

(iii) Utilities (per month)

(iv) Other Contingent Expenses (per month)

30,042 Rs. 11,16,942

C. Total Capital Investment

(1) Cost of Production (per year)

(2) Turnover (per year)

Rs. 17,44,091 10.70%

2365771 100 = 2365771+1744091 = 57%

Addresses of Machinery and Equipment Suppliers

Addresses of Raw Material Suppliers

You might also like