Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 88 views

    MODAxx 1 20W

    Uploaded by

    tosh_smth
    The document describes radio frequency (RF) driver devices that produce a fixed, stable RF frequency signal for applications such as driving acousto-optic modulators and frequency shifters. The devices are available in OEM or laboratory versions, with the OEM versions being compact units that require external cooling and power supply, while the laboratory versions integrate these components into a standalone turnkey system. Operating parameters like frequency, power output, and modulation options can be customized based on the application.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    MODAxx 1 20W

    Uploaded by

    tosh_smth
    88 views5 pages
    The document describes radio frequency (RF) driver devices that produce a fixed, stable RF frequency signal for applications such as driving acousto-optic modulators and frequency shifters. The devices are available in OEM or laboratory versions, with the OEM versions being compact units that require external cooling and power supply, while the laboratory versions integrate these components into a standalone turnkey system. Operating parameters like frequency, power output, and modulation options can be customized based on the application.

    Original Description:

    Datasheet for modulator AOM

    Original Title

    MODAxx-1-20W

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes radio frequency (RF) driver devices that produce a fixed, stable RF frequency signal for applications such as driving acousto-optic modulators and frequency shifters. The devices are available in OEM or laboratory versions, with the OEM versions being compact units that require external cooling and power supply, while the laboratory versions integrate these components into a standalone turnkey system. Operating parameters like frequency, power output, and modulation options can be customized based on the application.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    88 views5 pages

    MODAxx 1 20W

    Uploaded by

    tosh_smth
    The document describes radio frequency (RF) driver devices that produce a fixed, stable RF frequency signal for applications such as driving acousto-optic modulators and frequency shifters. The devices are available in OEM or laboratory versions, with the OEM versions being compact units that require external cooling and power supply, while the laboratory versions integrate these components into a standalone turnkey system. Operating parameters like frequency, power output, and modulation options can be customized based on the application.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    RADIO FREQUENCY DEVICES - 2010

    MODAxx-1-20W
    FIXED FREQUENCY SOURCES

    DESCRIPTION
    These drivers based on quartz oscillators, produce a fixed stable and accurate RF frequency signal. The built in amplifier delivers the necessary RF power to drive an acousto-optic device. The RF output can be externally modulated with a convenient input signal, analog or TTL on request. Cooling is assured by conduction through the baseplate.

    FEATURES
    Fixed frequency 40, 80, 110, 180, 200, 350 MHz RF power 1, 2.5, 4, 10, 20 Watts Analog or TTL controls RoHS

    APPLICATIONS
    ACOUSTO-OPTIC DRIVER for modulators and frequency shifters
    Parameter Carrier frequency Frequency Stability Frequency accuracy Output RF Power (@1dB compression) Power supply Modulation Input Control Video In ns Unit MHz ppm/ C ppm W VDC 1 24, nom 0.45A 2.5 24, nom 0.65A MODAXX-1-20W 40 / 80 / 110 / 180 / 200 / 250 / 350 MHz Nom +/- 1 < 50 4 24, nom 1.0A 10-20 24, nom 2-2.5A

    0-5 V / 50 @F<110MHz 0-1 V / 50 @F>180MHz < 20 ns @40 MHz, < 10 ns @80 MHz < 8 ns @110 MHz, < 5 ns @180 MHz, < 3 ns @F>200MHz 50 < 1.5/1 dB Nom 45 SMA-DB15 / SMA mm / g
    3

    Rise Time / Fall time (10-90%) < 4 Watts Input / Output impedance VSWR Extinction Ratio Input / Output Connector Size / Weight Heat Exchange Operating Temperature

    129 x 61 x 30.1 / 500 Conduction through baseplate for OEM versions AA adds a supplementary heatsink + fan on top of 4-20 watts versiosn

    10 to 40 (max Tcase 55 C)

    Options / On request
    HIGH EXTINCTION RATIO MOD IN LABORATORY VERSION complete turn key systems with minimum set up time. 60dB 0-5V/500 ohms, 0-1V/100 Ohms, TTL/1Kohms POWER SUPPLY SIZE WEIGHT HEAT EXCHANGE 110-230 VAC 310x250x105 mm 3.6kg-3.8kg stand alone (fan integrated)

    LABORATORY VERSION: The frequency source and convenient amplifiers are integrated in a box which is supplied with 110-230 VAC. A selection switch on front panel allows the user to select both operating modes: - CW mode: internal CW modulation of RF power with front panel cursor. - AM mode: external amplitude modulation controlled through external modulation input.

    AA Sa reserves the right to make changes to the products or information herein without notice. No liability is assumed as a result of their use or application. AA Sa 18, rue Nicolas Appert F-91898 ORSAY - Tel : +33 (0)1 76 91 50 12 Fax : +33 (0)1 76 91 50 31 www.aaoptoelectronic.com

    PIN connections

    Pin 1: ANALOG IN Pin 3: TTL IN (option) Pin 5: High Extinction 200ns (option) Pin 6: NC Pin 8: RF power analog adj (option) Pin 9,11,13,15: +24VDC Pin 2,4,7,10,12,14: Ground

    HOW TO DETERMINE THE REFERENCE OF YOUR MODEL:

    MODAXX- By(y) z(t)


    CARRIER FREQUENCY 40, 80, 110, 180 MHz 200, 250, 350 MHz EXTINCTION RATIO -- 40 dB 60 60 dB OUTPUT RF POWER 30 1 Watts 34 2.5 Watts 36 4 Watts 40 10 Watts 42 16 Watts 43 20 Watts MOD IN IMPEDANCE -50 Ohms 500 500 Ohms 1k 1 Kohms

    POWER SUPPLY B 24 VDC D 110-230 VAC MODULATION INPUT 2 0-1 V 4 0-5V 5 TTL

    RF power versus Modulation Input signal 1,2 1 Normalized RF power 0,8 0,6 0,4
    PRF Vs Analog V IN (0-5V)

    0,2 0 0 1 2 3 Voltage (V) 4

    PRF vs TTL input signal

    AA Sa reserves the right to make changes to the products or information herein without notice. No liability is assumed as a result of their use or application. AA Sa 18, rue Nicolas Appert F-91898 ORSAY - Tel : +33 (0)1 76 91 50 12 Fax : +33 (0)1 76 91 50 31 www.aaoptoelectronic.com

    12.5
    F

    27.8

    55.4

    11

    30.5
    F

    30.1

    17.8

    4.5
    E
    Ce document est la proprit de AA-MCS et ne peut tre communiqu sans son accord. www.aa-mcs.com. Mail:info.technic@aa-mcs.com

    129 120

    14.3

    3. 2
    E

    61 51

    17.8

    49.6
    D C B
    1 3.2m

    Vrif.

    Nom: Date: Nom: Dess. Date: Matire:

    Saint-Jean T. 24/05/2006

    Cotes aprs traitement sauf contre indications

    Tolrances:

    0.1mm

    A
    0 Cration 24/05/06 T.S

    Traitement /Finition: MODAXX 1 to 2.5 Watts Titre: N

    A
    Ech: Page 1/1

    Ind.

    Description

    Date

    Visa Plan

    A4

    53.8

    17.8 3

    14.3

    17.8

    20.3

    24.5 36 33.35

    43.8 49.425

    24.5

    1:1
    129
    .2 O3
    F
    Ce document est la proprit de AA-MCS et ne peut tre communiqu sans son accord. www.aa-mcs.com. Mail:info.technic@aa-mcs.com

    61

    51

    4.5

    120

    Dessin par Nom: Date: Matire: Traitement /Finition: 1 0 Changement dissipateur Cration 20/02/07 S.C 25/08/06 T.S Titre: N Plan 4 3

    Vrifi par

    Saint-Jean T. 25/08/2006

    Cotes aprs traitement sauf contre indications

    Tolrances:

    0.1mm 1 3.2m

    MODAXX 4 to 20 Watts
    Ech: Page 2

    Ind.
    6

    Description
    5

    Date

    Visa

    1/1

    A3

    2010

    OEM or LABORATORY version?


    DRIVER

    ________________________________________________________________________

    OEM VERSIONS

    The OEM versions of AA drivers are compact, and generally dedicated to be integrated inside a larger system The heat exchange is done by contact cooling through the baseplate. It is very important to attach the driver with screws (and thermal grease) on a metallic plate or a heatsink in order to evacuate heat and prevent the amplifier part from destruction Power supply (generally 24 VDC) must be provided by user. Wiring is realized by user (power supply, control signals)

    LABORATORY VERSIONS

    The LABORATORY versions are turnkey systems integrating the OEM versions of the drivers including power amplifier if necessary The LABORATORY BOX just needs to be plugged into 110/230VAC plug. User does not need to provide power supply (24VDC) which is already supplied and wired inside the box. The LABORATORY BOX includes a Fan and necessary cooling method for all internal components. This is a standalone tabletop configuration. In CW mode, user does not need to bring control signals. This mode allows to operate the AO device in CW mode by using front panel potentiometers or buttons. (except for frequency control of DDS) In External Mode, user will provide its own control signals in order to drive the AO device in the fastest conditions.

    AA Sa reserves the right to make changes to the products or information herein without notice. No liability is assumed as a result of their use or application. AA Sa 18, rue Nicolas Appert F-91898 ORSAY - Tel : +33 (0)1 76 91 50 12 Fax : +33 (0)1 76 91 50 31 www.aaoptoelectronic.com

    You might also like