Rud Hadef

HOISTS WINCHES CRANES
EN ISO 9001:2000
Your direct link:

prices: www.hadef.com/prices www.hadef.com/data
Certified Company
data sheets drawings, etc.:
Program
Electric and Pneumatic Chain Hoists and Winches
Hoists of standard, low or ultralow headroom configuration zinc plated hand and load chains various accessories explosion-proof Chain Hoists and Winches Pneumatic Chain Hoists and Winches for offshore use
Manual Chain Hoists and Winches
reliable quality custom-built Hoists and Winches explosion-proof Spur Gear Hoists and Trolleys zinc plated hand and load chains hoists fitted with overload protection by slipping-clutch
HADEF professional line
favourable balance of price and performance short delivery times low maintenance work reliability and safety in use
complete Cranes and Adapter Cranes without main beam
Cranes and Crane components
Accessories
large variety of accessories reliable quality
L 2 min.
Lastangriffs- bzw. Umlenkpunkt
Important technical information about hoists, winches and cranes
L1
This brochure shows an extract from our current product range. For more information, please visit our website:
www.hadef.com
Content
Page Photos of HADEF Hoists in use Electric Chain Hoists Electric Chain Hoists / low and ultralow headroom configuration Pneumatic Chain Hoists / low and ultralow headroom configuration Electric Winches Pneumatic Winches Ex-version Hoists and Winches Hoists and Winches for offshore use Spur Gear Hoists Monorail Trolleys Spur Gear Hoists / low and ultralow headroom configuration Ratchet Lever Hoists Manual Winches 4 10 14 18 20 23 24 25 26 27 28 29 30
Electric Chain Hoist Monorail Trolleys Beam Clamp Wirerope Pull Hoist Spur Gear Hoist Lever Hoists
32 34 34 34 35 35
Articulated Single Girder Underslung Crane Jib Cranes and wall-mounted Jib Cranes Single Girder Manual Underslung and Overhead Travelling Cranes Single Girder Electric Underslung and Overhead Travelling Cranes Adapter Cranes / End Carriages / Gantry Cranes
36 37 38 39 40
Wireropes / Wirerope Clamps / Eye Hooks / Heart Shaped Thimbles Wirerope Pulleys / Pedestals / Trolley Wheels / Hand Chain Wheels Trolley End Stops Low Voltage Control / Pendant Control
42
FEM (drive mechanism) groups Important mechanical engineering formula Simplified check of the chain / Simplified wirerope determination Power / Torque / Gear transmission / Braking moment Suspension, Lifting and Track Height/ Frequency converter/ Dimensioning of beam/ Positionning switch Phase monitoring relay/ Testing of cranes/ Low voltage control Wirerope exit/ Insulation classes ATEX / EX
43 44 45 46 47 48 49 50 3
HADEF Hoists in use

Single Girder Electric Underslung Crane Type EDEE with Electric Chain Hoist Type 66/04 AKE capacity: 20 t
incl. HADEF steel construction
special paint suitable for pharmaceutical industry
Electric Chain Hoist Type 29/06 EE ultralow headroom configuration with electric trolley capacity: 1 t Electric Chain Hoist Type 62/05 R with push travel trolley capacity: 125 kg 4
Subject to changes
Offshore
rack and pinion drive
special surface treatment and offshore-paint to withstand rough conditions of use
Single Girder Manual Underslung Crane Type EDHH with Spur Gear Hoist Type 29/98 HH rack and pinion drive capacity: 3 t
ultralow headroom configuration for use in confined space i.e. for ships' engine room installation
Electric Wirerope Winch Type 42/87 E capacity: 2 t used for service work on the platform's anchorage chains
Electric Chain Hoist Type 29/06 EH ultralow headroom configuration with hand geared trolley capacity: 2 t
Subject to changes
Ultralow headroom
for curved beam
Electric Chain Hoist Type 29/06 EE ultralow headroom configuration with swivelling electric trolley capacity: 5 t
Traffic Tunnelling
6
Subject to changes
Le Grand Bleu
Jib Crane with Electric Chain Hoist ultralow headroom configuration and beam locking device
Adapter Crane with Electric Chain Hoist ultralow headroom configuration Type 29/06 EE, capacity: 1 t only 2,95 m height available
Wall-mounted Jib Crane Type 320/01 E with Electric Chain Hoist Type 28/06 ER with push travel trolley capacity: 400 kg in rescue container
Subject to changes
Electric Chain Hoist with electric trolley Type 66/04 AKE capacity: 5 t installed in a sewage plant in Tunisia
More than 30 HADEF Electric Chain Hoists Type 66/04 AKE with positionning switch are used to fill building material into industrial mixers.
Subject to changes
66/04 AK
Electric Chain Hoists Type 66/04 AKE - 25 t Type 66/04 AKE 40 t used for static rotor blade tests
Custom-built HADEF hoisting device to move a platform used in building construction
Subject to changes
Type 66/04 AK Technical Details

robust brake motor with ventilation up to 100 % ED (duty cycle) chain guide of hardened steel minimizes wear
milled, 5-pocket chain sprocket wheel made of hardened steel and long-lifetime chain resistant to wear
Smooth running and increased product lifetime by precision gear with finely grinded helical geared pinions robust and toothed housing wheels made of cast iron in GGG 40 quality
long life seals (O-rings)
plug-in connection for power supply and remote or safe feed-in of pendant control the chain by switch self-alignment device to avoid twisting
switch for exact setting of load positions
Overall costs/ Product lifetime

HADEF electric chain hoist AK (2m) with special RUD chain electric chain hoist (2m) with standard chain electric chain hoist (1Am) with standard chain
Comparison of chains
EN 818-7 T heat-treated DIN chain
purchase costs incl. costs for wear parts wages excluded
1,0
4
case-hardened standard DIN chain
Force on the chain
1 1Am 1 2 2m 3 4 5 6
chain wear in %
0,5
calibrated HADEF special chain
0,1 5000 10000 15000 0 20000
standard chain punctual load
calibrated HADEF special chain in line load
operation time in years 8 operation hours at full load per day
number of load movements (lifting + lowering)
10
Subject to changes
n m solutio iu m e r p s! e Th stallation in y t u d for heavy
66/04 AK
Electric Chain Hoists
NEU
NEW
Addition to the AK PREMIUM LINE!
AK 10 10 - 60 t
gle fall 12,5 t sin
Sicherheit
42 V low voltage control phase monitoring relay thermal protected hoist motor
Safety
emergency and operational limit switches hoist protection by power cut-off plug-in connection for power supply and remote or pendant control switch IP 55 enclosure protects the hoist from penetration of humidity and dust operating time meter available up to 5 m classifiation variable trolley speed of 0,1 8 m/min 5 years guarantee
(1)
- version on request
1) on condition of proper use, - wear parts excluded See our General Terms and guarantee conditions.
Subject to changes
11
Type 66/04 AK

capacity W.L.L. chain falls lifting speed type
up to Available city 60 t capa
66/04 AKS stationary with suspension eye

FEM 9.511/ ISO 4301
main/ slow
kg 250 500 500 630 630 1000 1000 1000 1250 1250 1600 1600 2000 2000 2500 2500 2500 3200 3200 4000 5000 5000 5000 6300 6300 10000 10000 10000 12000 12000 12500 15000 15000 20000 20000 20000 25000 25000 25000 30000 30000
no. 1 1 1 1 1 2 2 1 2 1 1 1 2 1 2 2 1 2 2 2 2 1 1 1 1 1 2 2 2 2 1 3 3 2 4 4 2 5 5 6 6
m/min 16,0/4,0 6,0 9,4/2,3 6,0 9,4/2,3 3,0 4,5/ 1,1 8,0/ 2,0 4,5/ 1,1 8,0/ 2,0 8,0/ 2,0 11,0/ 2,6 4,0/ 1,0 10,0/ 2,5 4,0/ 1,0 5,5/ 1,3 8,0/ 2,0 4,0/ 1,0 5,0/ 1,25 5,0/ 1,25 4,0/ 1,0 5,4/ 1,35 8,0/ 2,0 5,4/ 1,35 8,0/ 2,0 5,8/1,4 2,8/ 0,7 4,0/ 1,0 2,8/ 0,7 4,0/ 1,0 5,8/1,4 1,8/ 0,45 2,6/ 0,6 2,9 /0,7 1,35/0,35 2,0/ 0,5 2,9/0,7 1,1/ 0,27 1,6/ 0,4 1,0/ 0,2 1,3/ 0,3 AK 402 DT 80 N 8/2 AK 405 DT 80 K 4 AK 405 DT 80 N 8/2 AK 406 DT 80 K 4 AK 406 DT 80 N 8/2 AK 410 DT 80 K 4 AK 410 DT 80 N 8/2 AK 610 DT 90 L 8/2 AK 412 DT 80 N 8/2 AK 612 DT 90 L 8/2 AK 716 DT 100 L 8/2 AK 716 DT 100 L 8/2 AK 620 DT 90 L 8/2 AK 820 FN 100 M8/2 AK 625 DT 90 L 8/2 AK 725 DT 100 L 8/2 AK 825 FN 100 M8/2 AK 732 DT 100 L 8/2 AK 832 FN 100 M8/2 AK 840 FN 100 M8/2 AK 850 FN 100 M8/2 AK 905 FN 112 M8/2 AK 905 FN 132 M8/2 AK 906 FN 112 M8/2 AK 906 FN 132 M8/2 AK 1010 FN 160 M8/2 AK 910 FN 112 M8/2 AK 910 FN 132 M8/2 AK 912 FN 112 M8/2 AK 912 FN 132 M8/2 AK 1012 FN 160 M8/2 AK 915 FN 112 M8/2 AK 915 FN 132 M8/2 AK 1020 FN 160 M8/2 AK 920 FN 112 M8/2 AK 920 FN 132 M8/2 AK 1025 FN 160 M8/2 AK 925 FN 112 M8/2 AK 925 FN 132 M8/2 AK 930 FN 112 M8/2 AK 930 FN 132 M8/2 2m/M5 2m/M5 2m/M5 1Bm/M3 1Bm/M3 2m/M5 2m/M5 2m/M5 1Bm/M3 1Bm/M3 2m/M5 2m/M5 2m/M5 2m/M5 1Bm/M3 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 1Bm/M3 1Bm/M3 2m/M5 2m/M5 2m/M5 1Bm/M3 1Bm/M3 1Bm/M3 2m/M5 2m/M5 2 m/M5 2m/M5 2m/M5 1Bm/M3 2m/M5 2m/M5 2m/M5 2m/M5 travel speed of 16/4 m/min for electric trolleys as standard, other speeds on request.
66/04 AKR with push travel trolley
66/04 AKH with hand geared trolley
66/04 AKE with electric trolley
12
Subject to changes
Electric Chain Hoist Type 66/04 AKS stationary used in the food industry
Type 66/04 AK

HADEF testing stand (up to 100 t)
66/04 AK
Optionally available:
up to 8 lifting/lowering positions programmable by teach in method (see page 47) load measuring device with load indicator operating time meter hook suspension instead of suspension eye load factor memory to log operation data monitoring of brake lining wear special voltages or frequencies radio control IP 66 - protection against dust and overflow continuous speed adjustment by frequency converter control (see page 47) modification for curved beam variable trolley speed of 0,1 - 8 m/min. (for AK 4 - AK 7) -version
HADEF double-rail crab Type 35/04 with electric chain hoist Type 66/04 AK capacity: 25 t for Double Grider Electric Overhead Travelling Crane Type ZEE span: 15 m
radio (remote) control

Subject to changes
13

Low Headroom Configuration
Type 28/06 EE capacity 40 t / 8 chain falls
Type 28/06 E
HADEF Electric Chain Hoist combined with monorail trolley Low headroom configuration with push travel trolley Type 28/06 ER with hand geared trolley Type 28/06 EH with electric trolley Type 28/06 EE
capacity W.L.L.
chain falls
hook to hook dimension
lifting speed main/ slow
FEM 9.511/ ISO 4301
kg
no.
mm
m/min 9 / 2,2 8/2
500 1000 1600 2000 2500 2500 3200 5000 5000 5000 6300 6300 10000 10000 12000 12000 15000 15000 20000 20000 25000 25000 30000 30000 40000 40000 50000 60000
Note:
1 1 1 2 1 2 2 2 1 1 1 1 2 2 2 2 3 3 4 4 5 5 6 6 2x4 2x4 2x5 2x6
300 361 479 456 405 567 567 543 569 569 569 569 775 775 775 775 821 821 821 821 925 925 975 975 1155 1155
(1) (1)
2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 1Bm/M3 1Bm/M3 2m/M5 2m/M5 1Bm/M3 1Bm/M3 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 1Bm/M3 1Bm/M3
11 / 2,6 4/1 8,0/ 2,0 5,5 / 1,3 5,5 / 1,3 4,0 / 1,0 5,4 / 1,35 8,0 / 2,0 5,4 / 1,35 8,0 / 2,0 2,8 / 0,7 4,0 / 1,0 2,8 / 0,7 4,0 / 1,0 1,8 / 0,45 2,6 / 0,6 1,35 / 0,35 2,0 / 0,5 1,1 / 0,27 1,6 / 0,4 1 / 0,2 1,3 / 0,3 1,35 / 0,35 2,0 / 0,5 1,1 / 0,27 1,0 / 0,2
for low Favourable purposes headroom
electric trolleys with two travel speeds of 16/4 m/min, other travel speeds on request
1) dimensions on request
14
Subject to changes
Type 29/06 Synchro
modification for curved beam on request
Electric Chain Hoists ultralow headroom configuration

with hand geared trolley Type 29/06 EHS Synchro with electric trolley Type 29/06 EES Synchro
capacity W.L.L.
chain falls
lifting speed
FEM 9.511/ ISO 4301
load chain
kg
no.
mm
m/min
mm
500 1000
2 2 2 2 2
155 155 185 213 213
9/2,2 9/2,2 8/2 11/2,6 8/2
2m/M5 2m/M5 2m/M5 2m/M5 2m/M5
5,0 5,0 7,0 9,0 9,0
for smooth two drives g with high in lifting/lower eeds sp g liftin
2000 2500 3200

Note:
Type 29/06 EEL Big Bag

HADEF Electric Chain Hoist combined with monorail trolley ultralow headroom configuration with electric trolley
capacity
chain falls
W.L.L.
lifting speed
FEM 9.511/ ISO 4301
horizontal width between hook and hoist unit x
Big Bag n configuratio
kg
no.
mm
m/min
mm
1000 2000 3200 5000 6300

Note:
2 2 2 4 4
155 185 213 254 254
4,5 /1,1 4,0/1,0 4,0/1,0 2,8/0,7 2,0/0,5
2m/M5 2m/M5 2m/M5 2m/M5 1Bm/M3
545 620 680 750 750

X optional as desired
Subject to changes
15
Type 29/06 EH + EE
HADEF Electric Chain Hoist combined with monorail trolley ultralow headroom configuration with hand geared trolley Type 29/06 EH with electric trolley Type 29/06 EE
n in ble solutio The favoura reas. eadroom a reduced h
Type 29/06 EE capacity 16 t 4 chain falls
capacity W.L.L.
chain falls
lifting speed main/ slow
FEM 9.511/ ISO 4301
kg
no.
mm
m/min
1000 2000 2500 3200 5000 5000 6300 10000 10000 12000 16000 20000 25000 30000 40000 50000 60000
Note:
2 2 2 2 4 2 4 4 2 2 4 4 6 6 2x4 2x5 2x6
155 185 213 213 276 280 276 305 360 360 407 487 575 575 710 730
(1)
4,5/ 1,1 4,0/ 1,0 5,5/ 1,3 5,5/ 1,3 2,8/ 0,7 4,0/ 1,0 2,0/ 0,5 2,0/ 0,5 2,8/ 0,7 2,8/ 0,7 1,4/ 0,3 1,4/ 0,3 1,0/ 0,2 1,0/ 0,2 1,4/ 0,3 1,1/ 0,27 1,0/ 0,2
2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 1Bm/M3 2m/M5 2m/M5 1Bm/M3 3m/M6 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 1Bm/M3
Type 29/06 EE capacity 50 t 10 chain falls
electric trolleys as standard with 16/4 m/min, other travel speeds on request
1) dimensions on request.
16
Subject to changes
ultralow headroom configuration low headroom configuration compact design
ultralow headroom configuration

height of the building can be reduced or, if the building does already exist the ultralow headroom hoist is an ideal solution where there is lack of space available
Up to 1000 mm additional operating height available with ultralow headroom hoist
Subject to changes
17
Serial model up to EX-class: II 2G IIB c T4 II 2D c 135C
Type 70/06 AP
Pneumatic Chain Hoist

stationary hoist with suspension eye Type 70/06 APS with push travel trolley Type 70/06 APR with hand geared trolley Type 70/06 APH with pneumatic trolley Type 70/06 APP
capacity W.L.L.
chain falls
lifting speed
Type
FEM 9.511/ ISO 4301
load chain
lifting
lowering
kg
no.
m/min
m/min
mm
500 1000 1000 1600 2000 2000 3200 3200 5000 5000 6300 10000 12000 15000 20000 25000 30000
1 2 1 1 2 1 2 2 2 1 1 2 2 3 4 5 6
7,0 3,5 8,0 8,0 4,0

(1)
16,0 8,0 15,0 16,0 7,0

(1)
AP 405 TI 8 AP 410 TI 8 AP 610 TI 15 AP 716 TI 25 AP 620 TI 15 AP 820 TI 35 AP 732 TI 25 AP 832 TI 35 AP 850 TI 35 AP 905 TI 50 AP 906 TI 50 AP 910 TI 50 AP 912 TI 50 AP 915 TI 50 AP 920 TI 50 AP 925 TI 50 AP 930 TI 50
2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 1Bm/M3 2m/M5 1Bm/M3 2m/M5 2m/M5 2m/M5 2m/M5
5 5 7 9 7 9 9 11,3 11,3 16 16 16 16 16 16 16 16
4,0
(1)
8,0
(1)
(1)
(1)
2,7 2 1,5 1,2 0,9 0,7 0,6 0,45
3,6 3,6 2,2 2,2 2,2 1,1 0,7 0,6
1) dimensions on request
Pneumatic Chain Hoist Type 70/06 APP with pneumatic trolley capacity 1 t / 2 chain falls
18
Subject to changes
70/06 AP
Serial model up to EX-class: II 2G IIB c T4 II 2D c 135C
Pneumatic
monorail trolley. Low headroom configuration 28/06 APR 28/06 APH 28/06 APP
FEM 9.511/ ISO 4301 load chain
Pneumatic Chain Hoist combined with with push travel trolley Type with hand geared trolley Type with pneumatic trolley Type
capacity W.L.L. chain falls hook to hook dimension
Type 28/06 AP low headroom configuration
lifting speed
lifting
lowering
kg
no.
mm
m/min
m/min
mm
500 1000 1600 2000 3200 5000 6300 12000
1 1 1 2 2 2 1 2
300 361 479 456 567

(1)
7,0 8,0 8,0 4,0 4,0 3,0 2,0 1,2
16,0 15,0 16,0 7,0 8,0 6,0 3,6 2,2
2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 2m/M5 1Bm/M3 2m/M5
5,0 7,0 9,0 7,0 9,0 11,3 16,0 16,0
569 775
Intermediate capacities and capacities up to 60 t available. 1) On request.
28/06 AP
Type 29/06 AP ultralow headroom configuration

Pneumatic Chain Hoist combined with monorail trolley. with hand geared trolley Type 29/06 APH with pneumatic trolley Type 29/06 APP
capacity W.L.L.
chain falls
lifting speed
FEM 9.511/ ISO 4301
load chain
29/06 AP
lifting
lowering
kg
no.
mm
m/min
m/min
mm
1000 2000 2500 3200 6300 12000
2 2 2 2 4 2
155 185 213 213 254 360
3,5 4,0 4,0 4,0 1,8 1,2
8,0 7,0 8,0 8,0 3,6 2,2
2m/M5 2m/M5 2m/M5 2m/M5 1Bm/M3 1Bm/M3
5,0 7,0 9,0 9,0 9,0 16,0
Intermediate capacities and capacities up to 60 t available.
Subject to changes
19
Electric Wirerope Winches
42/87 E
Type 42/87 E
pulling rope force
wirerope speed
wirerope
FEM 9.511/ ISO 4301
wirerope storage
1st layer
1st layer
daN (kg) 500 500 990 990 1000 1000
m/min 6,0 16,0/4,0 6,0 16,0/4,0 6,0 16,0/4,0 6,0 16,0/4,0 8,0/2,0 6,0/1,5 5,5/1,4 4,0/1,0
mm 6 6 9 9 9 9 12 12 16 20 24 28
nec. minimum breaking load kN 20 20 40 40 40 40 80 80 128 200 300 400 1Am/M4 1Am/M4 1Am/M4 1Am/M4 1Am/M4 1Am/M4 1Am/M4 1Am/M4 1Am/M4 1Am/M4 1Am/M4 1Am/M4
1st layer m 24,0 24,0 25,0 25,0 25,0 25,0 30,0 30,0 31,0 35,0 47,0 50,0
total in top rope layer m 179 179 145 145 145 145 226 226 23 259 350 280
Electric Wirerope Manriding Winch Type 42/87 MR for transport of persons
2000 2000
nal winch optio * As lifting required! limit switch
ch* Pulling win
3200 5000 7500 10000
Type 43/86 E Liftboy
pulling rope force 1st layer
wirerope speed top layer
wirerope
FEM 9.511/ ISO 4301
wirerope storage
(2)
daN (kg) 125 250 500 990 1000 2000 3200
m/min 11,0 7,0 4,0 6,0 6,0 6,0 (1) 5,5
mm 4 4 6 8 8 11 16
m 1Bm/M3 1Bm/M3 1Bm/M3 1Bm/M3 1Bm/M3 1Bm/M3 1Bm/M3 6,4 7,1 5,7 8,4 8,4 8,0 9,0
m 32 35 30 30 30 30 37
5 9 18 36 36 70 114
Type 43/86 E with A.C. motor 230 V 50 Hz complete model
(1) for single phase current 3 m/min. (2) with ungrooved drum

Type 43/86 E with threephase current motor
ch* Pulling win
20
Subject to changes
43/86 E
nec. minimum breaking load kN
1st layer total in top rope layer
layers on all rope s d e e p s h Hig ce-free maintenan / M5 ication 2m if s s la c ty du
Type 47/05 E

very high, adjustable wirerope speeds long lifetime large wirerope storage capacities frequency control for smooth running high performance planetary gear integrated in the drum IP 54 enclosure
ch* Pulling win
The serial winch is suitable for various purposes of use such as: material handling winch deck winch builder's winch rescue and towing winch
Large variety of accessories available such as:

secondary brake as safety brake (motor brake) or as brake acting directly on the drum accessory drive (motor or manual) manrider winch winch for different kinds of conveyors pressure roller wirerope winding device free-wheeling of drum slack-rope monitoring device load factor memory radio control higher enclosure classification drum with separation spacers
pulling rope force
wirerope speed at 50 Hz rated frequency
wirerope
wirerope storage
motoroutput
1st layer
5. layer
1st layer 3. layer m/min 6 7,7 11 5,2 7 9 3,8 6 8 3,3 5 6,5 2,6 4 4,9 3 4 6,5 18 2,6 3,2 5,5 14 4,5 6,5 8,5 10 4,5 7 8,5 4 6,5 7,5 4 5,5 7 m/min 7,1 9 13 6,0 9 10 4,5 7 9 3,9 6 7,7 3 4,7 5,8 3,6 4,7 6,5 22 3,1 3,8 6,5 17 5,5 7,5 10 12 5,5 8,5 10 5 8 9 4,7 6,5 8,5
5. layer m/min 8 10 15 6,9 10 11 5,2 8 10,5 4,5 6,9 8,9 3,5 5,5 6,9 4,1 5,5 9,5 26 3,7 4,5 8 19 6,5 8,5 11,5 15 6,5 10 12 6 9,5 10,5 5,5 8 10
mm 14
1st layer m 67
5. layer m 400 kW 1,5/6 2/9 3/12 1,5/6 2/9 3/12 1,5/6 2/9 3/12 1,5/6 2/9 3/12 1,5/6 2/9 3/12 2/9 3/12 22 55 2/9 3/12 22 55 22 30 45 55 30 45 55 30 45 55 30 45 55
daN (kg) daN (kg) 5000 3700
6300
4600
16
60
370
8000
5850
18
62
365
10000
7250
20
55
350
12500
9000
22
54
350
16000
11400
25
52
345
20000
14500
28
50
340
25000
18000
32
52
340
hydraulic drive units

32000 22000
36
46
315
36000
24500
36
49
335
40000
28000
40
54
360
Subject to changes
21
Type 45/07 E
nal winch optio * As lifting ! d require limit switch
ch* Pulling win

Pulling rope force 1st layer 5th layer 1st layer Wirerope speed wirerope wirerope storage motor output
(1)
A 3rd layer 5th layer 1st layer 5th layer
daN (kg)
daN
m/min 15
m/min 17 26 40 12 16 22 8 12 18 7 11,2 16 6,5 8,2 12 4,7 6,6 9,8 3,6 5,8 7,2 2,9 4,2 5,8 2,4 3,5 4,5 8,6 2,9 3,6 7,4 3,2 5,7 7,4
m/min 19 30 44 14 19 25 9 13 20 8,5 13 18 7,7 10 14 5,7 7,8 11 4,3 6,8 8,4 3,4 4,9 6,8 2,8 4,2
mm
m/min
m/min
kW 1,5/6
35 10 3200 2375 14 19 6 4000 2900 10 15 6 5000 3600 9,5 13 5,3 6300 4300 6,7 10,1 4 8000 5600 5,5 7,9 3 10000 6900 4,7 5,9 2,4 12500 8700 3,5 4,8 2 3 16000 10500 3,7 7 2,3 20000 14410 2,9 5,9 2,5 25000 17500 4,5 5,8
3/12 1,5/6 12 30 205 2,2/9 3/12 1,5/6 13 28 190 2,2/9 3/12 1,5/6 14 26 180 2,2/9 3/12 1,5/6 16 23 160 2,2/9 3/12 1,5/6 18 23 160 2,2/9 3/12 1,5/6 20 23 170 2,2/9 3/12 1,5/6 22 26 175 2,2/9 3/12 1,5/6 2,2/9 25 20 155 3/12 22 FU 2,2/9 28 17 150 3/12 22 FU 3/12 32 18 150 22 FU 30 FU
5,4 10,2 3,5 4,4 8,9 3,9 6,8 15
(1) FU = Frequency control necessary
22
Subject to changes
45/07 E
2000
1550
24
10
35
230
2,2/9
Type 42/87 P
Pneumatic Wirerope Winches

nal winch optio * As lifting ! required limit switch
ch* Pulling win
-version on request
42/87 P
pulling rope force
wirerope speed
wirerope nec. minimum breaking load kN 20 40 40 80 128 200 300 400
FEM 9.511/ ISO 4301
wirerope storage
1. layer
top layer
lifting
lowering
1st layer total in top rope layer
daN (kg) 500 990 1000 2000 3200 5000 7500 10000
daN (kg) 320 650 650 1400 2000 3200 5000 6300
m/min 15,0 10,0 10,0 5,0 7,0 5,0 5,0 4,0
m/min 28,0 17,0 17,0 9,0 12,0 9,0 9,0 7,0
mm 6 9 9 12 16 20 24 28
m 1Am/M4 1Am/M4 1Am/M4 1Am/M4 1Am/M4 1Am/M4 1Am/M4 1Am/M4 24 25 25 30 31 35 47 50
m 179 145 145 226 230 259 351 282
pulling rope force 1. layer
wirerope speed
wirerope
FEM 9.511/ ISO 4301
wirerope storage
Type 43/86 P
1st layer total in top rope layer m m 35 35 30 30 30 30 30 30
lifting
lowering
daN (kg) 250 250 500 500 500 990 1000 2000
m/min 7,0 12,0 4,0 8,0 12,0 6,0 6,0 3,0
m/min 12,0 18,0 7,0 16,0 16,0 12,0 12,0 6,0
mm 4 4 6 6 6 8 8 11
nec. minimum breaking load kN 9 9 18 18 18 36 36 70 1Bm/M3 1Bm/M3 1Bm/M3 1Bm/M3 1Bm/M3 1Bm/M3 1Bm/M3 1Bm/M3
5,6 5,6 4,8 4,8 4,8 6,8 6,8 6,3
43/86 P
-version on request
nal winch optio * As lifting ! d e ir u req limit switch
ch* Pulling win
Subject to changes
23
Special Hoist Program

explosion-proof Chain Hoists
-version
Photo: SIRI
Various manual and pneumatic chain hoists and winches are available in exlosion-proof design.
24
Subject to changes
Offshore
Spezialgerte
Special Hoists Application
Photo: yvind Hagen, Statoil
Pneumatic Chain Hoist Type 29/06 APP with pneumatic trolley capacity 30 t / 6 chain falls offshore-design
Pneumatic Chain Hoist Type 29/06 APP with pneumatic trolley capacity 12 t / 2 chain falls
Subject to changes
25
Type 24/98
fitted with ction is ho t prote tch lu -c g in p by slip
Type 9/98
Spur Gear Hoists

as standard for 3 m suspension height
capacity W.L.L. chain falls hook to hook dimension weight -version on request kg no. mm kg
Spur Gear Hoist combined with monorail trolley. Compact design with push travel trolley Type 24/98 HR with hand geared trolley Type 24/98 HH
capacity W.L.L. chain falls hook to hook dimension weight
kg
no.
mm
kg
500 1000 1500 2000 3000 5000 10000 10000 15000 20000 25000
(1) (1) (1) (1)
1 1 1 2 2 2 4 2 3 4 5 2x3 2x4 2x5
288 345 423 491 593 702 755 824 1115 1165 1233 1160 1280 1470
8,9 12,2 19,6 13,6 27,0 42,0 105,0 100,0 135,0 170,0 198,0 270,0 340,0 396,0
500 1000 1500 2000 3000 5000 10000
1 1 1 2 2 2 4
244 289 359 446 495 592 615
20,1 26,7 50,6 44,6 76,0 97,0 182,5

-version on request
capacities up to 25 t available
30000 40000 50000
operator (1) only one to 25 t up d ire requ
Type 23/09
capacity W.L.L.
chain falls
weight
Type 11/09
Robust Aluminium Spur Gear Hoist
capacity W.L.L. chain falls hook to hook dimension weight
kg
no.
mm
kg
500 1000 1500 2000 3000 5000
1 1 1 2 2 3
291 345 419 433 476 595
22,5 28,0 45,0 49,0 76,0 93,0
kg
no.
mm
kg
250 500 1000 1500 2000 3000 5000
1 1 1 1 2 2 3
288 288 345 423 491 593 620
11,0 11,0 13,0 18,0 22,0 30,0 39,0
26
Subject to changes
23/09
Robust Aluminium Spur Gear Hoist combined with monorail trolley. Compact design with push travel trolley Type 23/09 HR with hand geared trolley Type 23/09 HH
24/98
Type 19/90 Type 22/90 Type 22/90 E

Type 22/90 E
Monorail push travel trolley Type 19/90 Monorail hand geared trolley Type 22/90 Monorail electric trolley Type 22/90 E
capacity W.L.L. flange width 1N from - to flange width 2N from - to
Type 22/90 Type 19/90
kg
mm
mm
500
-version on request
50 - 146 50 - 179 50 - 173 50 - 173 66 - 186 66 - 186 74 - 182 74 - 164 119 - 189 119 - 189
147 - 302 180 - 310 174 - 316 174 - 316 187 - 310 187 - 310 183 - 310 165 - 310 190 - 310 190 - 310
1000 1500 2000
e trolley runs with th lley tro e th ks bloc e load including th
2500 3200 5000 6300 7500 10000
Beam locking device
capacities up to 100 t available (combination of trolleys) curve radius on request
Monorail Trolleys
Type 20/94
Monorail push travel trolley Type 20/94 AFR Monorail hand geared trolley Type 20/94 AFH
Type 20/94 AFR
Monorail electric trolley Type 20/94 AFE Monorail pneumatic trolley Type 20/94 AFP
capacity W.L.L. flange width 1N from - to flange width 2N from - to
Type 20/94 AFP

kg
mm
mm
500 1000 2000 3200 4000 5000
50 - 146 50 - 135 66 - 185 74 - 196 74 - 196 74 - 192 119 - 215 119 - 215 119 - 215
147 - 302 136 - 220 186 - 310 197 - 310 197 - 310 193 - 310 216 - 312 216 - 312 216 - 312
Type 20/94 AFH
6300 7500 10000
Type 20/94 AFE
capacities up to 25 t available curve radius on request
Subject to changes
27
Type 28/98
Spur Gear Hoists

as standard for 3 m suspension height Spur Gear Hoist combined with monorail trolley. Low headroom configuration with push travel trolley Type 28/98 HR with hand geared trolley Type 28/98 HH
-version on request
kg
no.
mm
kg
500 1000 1500 2000 3000 5000 10000
1 1 1 2 2 3 2
222 264 327 325 384 507 760
35 42 76 78 104 165 810
Type 29/98
Spur Gear Hoist combined with monorail trolley. ultralow headroom configuration with hand geared trolley Type 29/98 HH
capacity W.L.L.
chain falls
weight
kg
no.
mm
kg
1000 2000 3200 5000 6300 10000
2 2 2 4 4 2
140 163 193 239 239 270
75 145 225 370 370 1020
28
Subject to changes
29/98
-version on request
28/98
capacity W.L.L.
chain falls
weight
53/07
capacity W.L.L.
chain falls
standard lifting height
weight with standard lifting height
Type 53/07
kg
no.
kg
800 1600 2500 3200 6300
1 1 1 1 2
1,5 1,5 1,5 1,5 1,5
5,7 8,0 11,2 15,0 26,0
Ratchet Lever Hoists

forged load hook with 360 rotation strong safety latch precision gear brake without separate brake discs hoist protection by slipping clutch as option powder coated steel body free-wheeling of unloaded chain high-tensile, zinc plated load chain
cm
capacity W.L.L.
chain falls
standard lifting height
weight with standard lifting height
m body Aluminiu all ht and sm ig e w t h g li

15
5 10
kg
no.
kg
20
250 500 750 1500

(1) (2)
1 1 1 1
1 1 1 1
1,5 2,5 3,4

30 25
5,9
(1) available mid of 2009 (2) available end of 2009
250 kg
Subject to changes
29
Type 199/75
Aluminium Wirerope Winch
pulling rope force 1st layer
wirerope
kg
mm
wirerope storage crank effort drum weight FEM 9.511/ without nec. 6. layer 1st layer ISO 4301 1st wirerope minimum layer breaking load m m kN daN (kg) mm kg
63 125 250
3 3 4
3 5 9
1Cm/M2 1Cm/M2 1Cm/M2
2,0 2,0 1,4
18,0 18,0 14,0
10 12 16
40 40 46
3 3 5
Wirerope winches
Type 200/77
Wirerope Winch
pulling rope force 1st layer wirerope nec. minimum breaking load kN FEM 9.511/ ISO 4301 wirerope storage crank effort weight without wirerope 1st layer 6. layer 1st layer daN (kg) kg kg mm m m
50 100
3 3
2 4
1Cm/M2 1Cm/M2
0,4 0,45
5,3 7,8
8 6
1,0 2,1
Type 190/94 Type 192/98

Stainless Steel Wirerope Winch
tio gear ra h ig h l na rope additio rolled t n o c ed for spe t wirerope pulling pay-ou
rope force 1st layer nec. minimum breaking load kN
Type 190/94
FEM 9.511/ ISO 4301 wirerope storage crank effort drum 1st layer m 4. layer m 1st layer daN (kg) mm kg weight without wirerope
kg
mm
500
18
1Em
4,9
25,0
17
82,5
11
Type 192/98
pulling rope force 1st layer wirerope nec. minimum breaking load kN FEM 9.511/ ISO 4301 wirerope storage crank effort drum 1st layer 4. layer 1st layer weight without wirerope
kg
mm
daN (kg)
mm
kg
500
18
1Em
4,9
25,0
17
82,5
10
Type 430/91
Worm Gear Wirerope Winch
pulling rope force wirerope nec. minimum breaking load mm kN FEM 9.511/ ISO 4301 wirerope storage crank effort drum weight without wirerope
1st layer kg 125 250 300
1st layer m
3. layer m 11,4 8,8 -
1st layer daN (kg) 5,5 11,5 14

mm kg
3 4 5
5 9 11
1Bm/M3 1Bm/M3 1Bm/M3
3,2 2,3 1,8
70 70 70
5,5 5,5 5,5
30
Subject to changes
pulling rope force 1st layer kg
wirerope nec. minimum breaking load kN mm
FEM 9.511/ ISO 4301
wirerope storage crank effort
drum
1st layer m
top layer m daN (kg) mm
weight without wirerope
Type 238/99
Worm Gear Wirerope Winch
also available with separating partition for operation with two wireropes
kg
250 500 1000 1500 2000 3000 5000
4 6 8 10 11 14 18
9 17 34 51 67 101 168
1Cm/M2 1Cm/M2 1Cm/M2 1Dm/M1 1Cm/M2 1Cm/M2 1Cm/M2
4,0 4,4 6,0 5,4 6,2 6,8 6,4
105 68 65 40 57 65 37
5 9 14 20 12 17 34
48 70 102 102 133 165 219
13 16 26 28 60 78 115
Wirerope winches
Type 250/33
pulling rope force 1st layer kg wirerope nec. minimum breaking load mm kN FEM 9.511/ ISO 4301
drum
1st layer m
top layer m
1st layer
Wall Winch
daN (kg)
mm
kg
300 500 1000 1500
5 6 9 11
11 18 36 54
1Bm/M3 1Bm/M3 1Bm/M3 1Bm/M3
4,8 5,2 6,1 5,4
42,2 67,4 15,3 13,8
10,3 15,4 16,4 20,3
120 150 200 205
34 50 87 110
optional with load pressure brake or with brake regulator
pulling rope force 1st layer kg
wirerope nec. minimum breaking load mm kN
FEM 9.511/ ISO 4301
drum
1st layer m
top layer m
1st layer daN (kg) mm
Type 260/76
Manual Spur Gear Wirerope Winch
kg
300 500 1000 2000 3000
6 6 9 12 13
10 16 32 63 95
1Dm/M1 1Dm/M1 1Dm/M1 1Dm/M1 1Dm/M1
2,3 2,3 3,4 4,1 3,0
11,8 11,8 12,0 9,0 7,0
19 21 18 32 30
70 70 102 120 120
10 10 15 23 23
capacity W.L.L.
lifting height
crank effort
lift per crank turn
weight
Steel Jack
acc. to DIN 7355
kg
mm
daN
mm
kg
1500 3000 5000 10000
350 350 350 350
25 25 25 50
14 8 4 4
13 20 27 42
Subject to changes
31
professional line
Type 62/05
Technical Details
suspension eye cover gear side spur gear cover motor side
motor with brake
slipping clutch supply socket
push button pendant socket with coupling
plug for mains supply with coupling (if equipped with electric trolley, the trolley will be connected here)
pendant push button incl. control cable, relieving rope and plug
optional with radio control
low voltage control for lifting/lowering is integrated in the Electric Chain Hoist (incl. phase monitoring relay) Trolley optionally with separate low voltage control or with frequency converter
operational limit switch stops the hoist at highest and lowest hook position
operational limit switch
variable limit switch stops the hoist at multiple points up to max. 25 m (lifting and lowering)
32
Subject to changes
professional line
Type 62/05
plug-in ns ctio conne
Electric Chain Hoist

easy to install comfortable to use
rmany e G n i Made
62/05
Type 62/05 E with electric trolley
Type 62/05 R with push travel trolley Type 62/05 S stationary hoist with suspension eye
capacity W.L.L.
chain falls
hook to lifting speed hook dimension

(1)
weight
(2)
kg 125 250 500 1000 1000 2000
no. 1 1 1 2 1 2
mm 367 367 400 463 480 570
m/min 8,0/2,0 8,0/2,0 8,0/2,0 4,0/1,0 10,0/2,5 5,0/1,25
kg 30 30 31 33 51 54
Type 62/05 H with hand geared trolley
(1) stationary hoist (2) standard suspension height = 3m
Subject to changes
33
professional line
Type 208/05 Type 209/05
Trolleys
capacity W.L.L. flange width 1N from - to mm flange width 2N from - to mm weight without hand chain kg
208/05
kg
push travel trolley Type 208/05

500 1000 2000 3000 5000 1000 2000 3000 5000 64 - 152 153 - 310 64 - 190 191 - 310 88 - 190 191 - 310 102 - 190 191 - 310 114 - 185 186 - 310 64 - 190 191 - 310 88 - 190 191 - 310 102 - 190 191 - 310 114 - 185 186 - 310 7 14 21 35 48 18 26 41 54
hand geared trolley Type 209/05
209/05
optional with threaded bolt for easy adjustment to flange width
capacity W.L.L. flange width weight approx. kg mm kg
Type 147/05
pulling rope force
lever force at full load
wirerope
Wirerope Pull Hoist
kg
daN
mm
kg
800 1600 3200
28,4 41,2 44,1
8 11 16
6 12 23
Type 221/05
Beam Clamp
1000 2000 3000 5000
75 - 230 75 - 230 90 - 320 90 - 320
4 5 10 12
34
Subject to changes
professional line
Spur Gear Hoist

Type 8/98
same hoist as HADEF high quality hoist Type 9/98 but without overload protection standard hoist for 3 m suspension height
Type 240/98
Spur Gear Hoist combined with monorail trolley compact design with push travel trolley Type 240/98 HR with hand geared trolley Type 240/98 HH
capacity W.L.L.
chain falls
hook to hook dimension mm 255 288 345 423 491 593 702
weight capacity W.L.L. kg 3,6 8,9 12,2 18,0 16,0 27,0 42,0 kg no. 1 1 1 2 2 2 mm 244 289 359 446 495 592 kg 20,1 26,7 50,6 44,6 76,0 97,0 chain falls hook to hook dimension weight
kg
no. 1 1 1 1 2 2 2
250 500 1000 1500 2000 3000 5000
500 1000 1500 2000 3000 5000
Lever Hoist
Type 25/05
standard hoist for 1,5 m lifting height
capacity W.L.L.
chain falls
weight with 1,5 m lifting height kg 2
Type 50/07
standard hoist for 1,5 m lifting height
kg
no. 1
250
cm 5 10
capacity W.L.L.
20
chain falls
weight with 1,5 m lifting height kg 6,2 9,6 15,5 27,0
15 25 30
kg
no. 1 1 1 2
750 1500 3000 6000
Subject to changes
35
Type TA
Articulated Crane
HADEF Articulated Single Girder Underslung Crane Type TA
-version on request
combined with Spur Gear Hoist Type 24/98 HR

capacity W.L.L.
Hoist HADEF Spur Gear Hoist Type 24/98 HR
beam profile IPE
span up to
weight of crane without hoist kg 90 105 125 170 90 130 180 240 130 180 240 320 150 200 270 360
kg
mm
160 24/98 HR 250 0,5 t 160 160 180 160 24/98 HR 500 0,5 t 180 200 220 200 24/98 HR 1000 1t 220 240 270
capacity W.L.L. Hoist HADEF Electric Chain Hoist Type 66/04 AKR or Type 62/05 R lifting speed FEM 9.511/ ISO 4301 span up to weight of crane without hoist kg
4000 5000 6000 7000 4000 5000 6000 7000 4000 5000 6000 7000 4000 5000 6000 7000
with Electric Chain Hoist Type 66/04 AKR or with Electric Chain Hoist Type 62/05 R
240 24/98 HR 1250 1,5 t 240 270 300
kg
m/min
mm
4000 250 62/05 R 5000 8,0/ 2,0

1Am/M4
90 105 125 170 90 130 180 240 130 180 240 320 150 200 270 360
6000 7000 4000 5000 6000 7000 4000 5000 6000 7000 4000 5000
500
AK 405 DT 80 N 8/2 62/05 R
9,4/ 2,3 8,0/ 2,0
2m/M5 1Am/M4
1000
AK 410 DT 80 N 8/2 62/05 R
4,5/ 1,1 4,0/ 1,0
2m/M5 1Am/M4
1250
AK 412 DT 80 N 8/2
4,5/ 1,1
1Bm/M3
6000 7000
36
Subject to changes
capacity W.L.L.
span clearance
hook to hook dim. Type 66/04 AK mm
weight of crane without hoist kg
SCHWENKBEREICH slewing range / Rotation
kg
mm
180
125
250
500
1000
1500 2000
2000 3000 4000 5000 6000 2000 3000 4000 5000 6000 2000 3000 4000 5000 6000 2000 3000 4000 5000 2000 3000 3500 2000 3000
393
393
393
453
610 610
92 107 170 192 307 92 147 170 277 307 125 147 246 354 396 184 270 312 354 227 270 291 227 270
Type 320/01 E Wall-mounted Jib Crane

Jib Cranes
Combination with all HADEF PREMIUM LINE and professional line Chain Hoists
capacity W.L.L.
span clearance
hook to hook dim. Type 66/04 AK mm
weight of crane without hoist kg
Type 360/01 E Jib Crane

kg
mm
125
250
630
393
1000
453
1250
453
1500 2000
610 610
SCHWENKBEREICH slewing range / Rotation
500
2000 3000 4000 5000 6000 2000 3000 4000 5000 6000 2000 3000 4000 5000 6000 2000 3000 4000 5000 2000 3000 4000 5000 2000 3000 4000 2000 3000 3500 2000 3000
393
393
393
252 268 354 377 604 252 332 354 573 604 310 332 542 784 827 310 512 742 784 481 700 742 784 481 700 742 658 700 721 658 700
270
Subject to changes
37
EDHH
Type EDHH
-version on request
capacity W.L.L.
span up to
wheel base
max. wheel load per wheel pair kg 795
Single Girder Manual Underslung Crane
kg
mm 7000
mm 1200
1000
10000 14000 7000
1200 1600 1200 1200 1600 1200 1200 1600 1600 1600 1600 1600 1600 2000 2000 2000 2000
900 1200 1110 1225 1600 1400 1500 1900 1900 2090 2400 3100 3300 3750 6030 6300 6580
1500
10000 14000 7000
2000
10000 14000 7000
3000
10000 14000 6000
5000
10000 14000 7000
10000
10000 14000
capacity W.L.L.
span up to
wheel base
Type EHH
kg
max. wheel load per wheel pair kg 635
Single Girder Manual Overhead Travelling Crane
-version on request
mm 6000
mm 800
1000
10000 14000 6000
1200 1600 800 1200 1600 800 1200 1600 1200 1200 1600 1200 1600 1600 1600 1600 2200
725 910 883 980 1233 1164 1264 1524 1739 1874 2094 2638 2924 3167 5155 5475 5936
1500
10000 14000 6000
2000
10000 14000 5000
3000
10000 14000 6000
EHH
38
Subject to changes
5000
10000 14000 7000
10000
10000 14000
EEE
Type EEE
EDEE
Hoist lifting speed FEM 9.511/ ISO 4301 span up to
Single Girder Electric Overhead Travelling Crane

capacity W.L.L. HADEF Electric Chain Hoist Type 66/04 AK kg m/min
mm 7000 9000 12000 16000 17000 18000 20000 7000 9000 12000 14000 16000 18000 20000 7000 9000 12000 14000 16000 18000 20000 7000 9000 12000 13000 16000 18000 20000 7000 11000 12000 16000 18000 20000 7000 11000 12000 16000 18000 20000 7000 10000 12000 14000 17000 18000 20000 6000 9000 11000 12000 14000 15000 18000 20000
1000
AK 410 DT 80 N 8/2
4,5/1,1
2 m/ M5
Single Girder Electric Cranes

Type EDEE
2000
AK 620 DT 90 L 8/2
4/1
2 m/ M5
2000
AK 820 FN 100 M 8/2
10,0/2,5
Single Girder Electric Underslung Crane

capacity W.L.L. Hoist HADEF Electric Chain Hoist Type 66/04 AK m/min lifting speed FEM 9.511/ ISO 4301 span up to
2 m/ M5
3200
AK 732 DT 100 L 8/2
4/1
2 m/ M5
kg
mm
1000
AK 410 DT 80 N 8/2
4,5/1,1
2 m/ M5
5000
AK 850 FN 100 M 8/2
4,0/1,0
2 m/ M5
2000
AK 620 DT 90 L 8/2
4/1
2 m/ M5
5000
AK 905 FN 112 M 8/2
5,4/1,35
2 m/ M5
3200
AK 732 DT 100 L 8/2
4/1
2 m/ M5
6300
AK 906 FN 112 M 8/2
5,4/1,35
1 Bm/ M3
5000
AK 850 FN 100 M 8/2
4,0/1,0
2 m/ M5
6300
AK 906 FN 112 M 8/2
5,4/1,35 1 Bm/M3
10000
AK 910 FN 112 M 8/2
2,8/0,7
2 m/ M5
10000 AK 910 FN 112 M 8/2
2,8/0,7
2 m/ M5
7000 9000 12000 15000 7000 9000 12000 13000 15000 7000 9000 12000 13000 15000 6000 10000 13000 15000 6000 7000 10000 12000 15000 8000 10000 11000 12000
Subject to changes
39
Single Girder Pneumatic Underslung Crane Type EDDD capacity: 1 t span: 7 m
crane installation
Single Girder Manual Overhead Travelling Crane Type EHH capacity: 6 t span: 6 m
40
Subject to changes
Adapter Cranes
without main beam
Save costs!
HADEF Adapter Cranes help to reduce expensive cost for transport as the components are supplied and the main beam can be bought nearby and installed on site.
Articulated Single Girder Underslung Crane Single Girder Manual Overhead Travelling Crane Single Girder Manual Underslung Crane Single Girder Electric Overhead Travelling Crane Single Girder Electric Underslung Crane
Type TA Type EHH Type EDHH Type EEE Type EDEE
End Carriages
ultralow headroom hoist
HADEF gantry crane with ultralow headroom Electric Chain Hoist Type 29/06 EE capacity: 5 t
Subject to changes
41

Rud Hadef

Uploaded by

Copyright:

Available Formats

Rud Hadef

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Rud Hadef

Uploaded by

Copyright:

Available Formats

HOISTS WINCHES CRANES

Your direct link:

data sheets drawings, etc.:

Electric and Pneumatic Chain Hoists and Winches

Manual Chain Hoists and Winches

HADEF professional line

complete Cranes and Adapter Cranes without main beam

Cranes and Crane components

large variety of accessories reliable quality

Lastangriffs- bzw. Umlenkpunkt

Important technical information about hoists, winches and cranes

HADEF Hoists in use

incl. HADEF steel construction

special paint suitable for pharmaceutical industry

special surface treatment and offshore-paint to withstand rough conditions of use

Custom-built HADEF hoisting device to move a platform used in building construction

Type 66/04 AK Technical Details

long life seals (O-rings)

switch for exact setting of load positions

Overall costs/ Product lifetime

purchase costs incl. costs for wear parts wages excluded

Force on the chain

calibrated HADEF special chain

0,1 5000 10000 15000 0 20000

standard chain punctual load

calibrated HADEF special chain in line load

operation time in years 8 operation hours at full load per day

number of load movements (lifting + lowering)

n m solutio iu m e r p s! e Th stallation in y t u d for heavy

Electric Chain Hoists

Addition to the AK PREMIUM LINE!

Electric Chain Hoists

up to Available city 60 t capa

66/04 AKS stationary with suspension eye

66/04 AKR with push travel trolley

66/04 AKH with hand geared trolley

66/04 AKE with electric trolley

Electric Chain Hoists

radio (remote) control

Electric Chain Hoists

hook to hook dimension

lifting speed main/ slow

FEM 9.511/ ISO 4301

m/min 9 / 2,2 8/2

1 1 1 2 1 2 2 2 1 1 1 1 2 2 2 2 3 3 4 4 5 5 6 6 2x4 2x4 2x5 2x6

for low Favourable purposes headroom

Type 29/06 Synchro

modification for curved beam on request

Electric Chain Hoists ultralow headroom configuration

hook to hook dimension

FEM 9.511/ ISO 4301

155 155 185 213 213

9/2,2 9/2,2 8/2 11/2,6 8/2

2m/M5 2m/M5 2m/M5 2m/M5 2m/M5

5,0 5,0 7,0 9,0 9,0

for smooth two drives g with high in lifting/lower eeds sp g liftin

2000 2500 3200

Type 29/06 EEL Big Bag

hook to hook dimension