Scomi Oiltools

Drilling Fluids, Drilling Waste Management and Production Enhancement Technology

single source cradle to grave solution provider.

Oilfield Services Energy & Logistics Engineering Scomi Equipment Inc

Energy Logistics

Production Enhancement

Scomi Oiltools History

KMC
Founded in 1982 Developed into full service Drilling Fluids company with 70% Malaysian Market Overseas expansion to Sudan & Myanmar Purchased by Scomi Group in 2003

KMC Oiltools

Scomi Oiltools
2007 brand rationalization within Scomi Group resulted in name change to Scomi Oiltools

Formed by the merger of KMC and Oiltools International

Developed into a global integrated Drilling Fluids and Drilling Waste Management company

Oiltools International Founded in 1963

Global Drilling Waste Management company

65 locations in 36 countries Acquired by Scomi Group in July 2004
Scomi Equipment Inc

Global Technology Enterprise

Oilfield Services

Transport Solutions

Marine Services

Scomi Equipment Inc

Oilfield Services

Scomi Equipment Inc

Product & Services Overview

Providing Cradle to Grave Solutions

Scomi Equipment Inc

Oilfield Services
One of the worlds leading providers of innovative high performance DRILLING FLUID SOLUTIONS and state-of-the-art DRILLING WASTE MANAGEMENT equipment and services.

Drilling Fluid Services

A complete range of drilling fluid solutions, water-based or non aqueous based solutions, encompassing challenging wells such as horizontal, multilateral, deep water and high temperature high pressure.

Drilling Waste Management

Effective containment, handling, treatment and disposal of waste drill cuttings with minimal environmental impact.

Scomi Equipment Inc

Production Enhancement Technology

Provides niche and customized solutions to assist clients in optimizing their production.

Flow Assurance

Integrity Maintenance

Separation Technology

Injected into oil and gas production facilities to avoid flow problems

To protect the pipelines from corrosion

To ensure oil, gas and water meet the specification for export and disposal

Scomi Equipment Inc

Global Research & Technology Centre (GRTC)

R&D & Technical Support

Quality Control & Assurance

Training

Scomi Equipment Inc

Our customers

Scomi Equipment Inc

Scomi Oiltools
Solids Control Drilling Waste Management
single source cradle to grave solution provider.

Oilfield Services Energy & Logistics Engineering Scomi Equipment Inc

Energy Logistics

Production Enhancement

Solids Control & Drilling Waste Management

Product Overview
Solids Control
Containment & Handling

Engineering Services

Treatment & Disposal

Scomi Equipment Inc

Solids Control

SOLIDS CONTROL

Scomi Equipment Inc

DWM

CONTAINMENT & HANDLING

Scomi Equipment Inc

DWM

TREATMENT & DISPOSAL

Scomi Equipment Inc

Scomi Oiltools
SCM-PrimaG Shaker

Scomi Equipment Inc

SCM-PrimaG 4P Linear Motion Shale Shaker

ADA Adjustable Deck Angle
Deck Angle is Adjustable while shaker is in motion 0 to 6 deg Single hand crank wheel with acme thread Hydraulic Adjustment Deck Angle will be available

Scomi Equipment Inc

SCM-PrimaG 4P Linear Motion Shale Shaker

Basket Construction
Basket is constructed from steel plate Yoke Construction steel Basket is seal welded and stress relieved, providing the Scomi Shaker with a stronger more rigid basket with the following advantages: Better transmission of G force throughout the basket Uniform G Force throughout basket Constant motion pattern throughout the basket Higher G Force at the screen Longer basket life Slight crown to screen deck to improve screen tensioning and eliminate screen flutter

Scomi Equipment Inc

SCM-PrimaG 4P Linear Motion Shale Shaker

Stepped Screen Layout
Screen position is stepped to reduce the foot print of the shaker and increase screening area

Solids fall from one screen onto another to improve solids conveyance
Screens set at a 2 deg angle in the basket to reduce overall footprint

Scomi Equipment Inc

SCM-PrimaG 4P Linear Motion Shale Shaker

Motor Mount
The SVX-70 Motor is unique in that it has 8 bolts per motor This provides increase stability Reduces risk of base cracking Reduces risk of bolt breaking The center of the bolts are directly over the basket wall center line. This ensure that the vibration and motion is transmitted to the basket evenly and more efficiently Results in even G force throughout the basket

Scomi Equipment Inc

SCM-PrimaG 4P Linear Motion Shale Shaker

Weir Feed / Top Feed
Also Available with a Top Feed Available with removable weir feed with a 33 weir height Starter panel mounted at the rear can be removed and / or relocated.

Scomi Equipment Inc

SCM-PrimaG 4P Linear Motion Shale Shaker

Spring Basket Mount
Improved Vibration Isolation from Basket to Shaker Skid Resistant to Chemical Attack from Drilling Fluids Resistant to High Temperature Drilling Fluids

Scomi Equipment Inc

SCM-PrimaG 4P Linear Motion Shale Shaker

Wedge Block
Wedge Blocks are only shorter than the width of the screen This improves the holding capabilities of the wedge block and keeps the screen firmly in place eliminating screen flutter Wedge Block Tool results in safe and easy wedge removal and tightening

Scomi Equipment Inc

SCM-PrimaG 4P Linear Motion Shale Shaker

Screen Cross & Side Supports
Durable Polyurethane Cross & Side Supports One Piece Mold for upper and lower screen cross support improves seal and basket life One Piece Mold snaps into place for easy removal and installation. No need for rivet gun or any tools Resistant to chemical attack from Drilling Fluid High Temperature Resistant

Scomi Equipment Inc

SCM-PrimaG 4P Linear Motion Shale Shaker

Extremely Low Maintenance Cost Due to:
Low Spare Part Inventory Cross & Side Supports Wedge Block & Tool Vibration Springs

Scomi Equipment Inc

SCM-PrimaG 4P Linear Motion Shale Shaker

Scomi Equipment Inc

SCM-PrimaG 4P Linear Motion Shale Shaker

Specifications
General Model Speed SCM PrimaG 4P 1,800 rpm

G Force
Screens No. of Screens Screen Area / Panel Screen Panel Area Non Blanked Screen Area Screen Area Dimension

7.3 gs
4 5.56 ft (0.5165 m) 7.71 ft (0.7163 mm) 22.24 ft (2.066 m) 0 to 6 deg

Length
Width Height Weir Height Weight Net Utility Requirements Power Voltage Frequency Phase

126 (3,200 mm)

68.75 (1,746 mm) 70 (1,778 mm) 31 (787.4 mm) 4,800 lbs (2,177 kg) 5 hp (2 x 2.5hp) (3.73 kW / 2 x 1.86 kW) 380 / 460 V 50 / 60 Hz 3 Phase

Scomi Equipment Inc

SCM-PrimaG 3P Linear Motion Shale Shaker

Specifications
General Model Speed SCM PrimaG 3P 1,800 rpm

G Force
Screens No. of Screens Screen Area / Panel Screen Panel Area Non Blanked Screen Area Screen Area Dimension

7.3 gs
3 5.56 ft (0.5165 m) 7.71 ft (0.7163 mm) 16.68 ft (1.55 m) 0 to 6 deg

Length
Width Height Weir Height Weight Net Utility Requirements Power Voltage Frequency Phase

100 (2,540mm)
68.75 (1,746 mm) 70 (1,778 mm) 31 (787.4 mm) 4,000 lbs (1,814 kg) 5 hp (2 x 2.5hp) (3.73 kW / 2 x 1.86 kW) 380 / 460 V 50 / 60 Hz 3 Phase

Scomi Equipment Inc

SCM-Ellipse 4P Shale Shaker

Features & Benefits
Progressive Elliptical Motion shaker with 6gs of vibrational force Large screening area of 30ft (2.79m) Small equipment footprint Durable Polyurethane wedge block hold screens securely in place Baskets are fully seal welded and stress relieved

2 layers of powder coat. Baked-on zinc-rich epoxy 1st layer for corrosion resistance and abrasion resistance final coat

Scomi Equipment Inc

SCM-Ellipse 4P Shale Shaker

Features & Benefits
Scomi shakers are engineered to minimize screen wear The large screening area Low weir height Efficient vibration isolation, hence a quiet machine during operation Seal welded baskets reduce corrosion and increase machine life

Minimal maintenance requirement

Scomi Equipment Inc

SCM-Ellipse 4P Shale Shaker

Specifications
General Model Ellipse Speed G Force Screens No. of Screens Non Blanked Area / Panel Screen Panel Area Non Blanked Screen Area Screen Angle Dimensions Length Width Height Weir Height Weight Net Utility Requirements Power Voltage Frequency 5 hp (2 x 2.5 hp) (3.73 kW / 2 x 1.86 kW) 380 / 460 V 50 / 60 Hz 4,800 lbs (2,177 kg) 126 (3,200 mm) 78.5 (1,994 mm) 70 (1,778 mm) 26.5 (673.1 mm) 4 5.56 ft (0.5165 m) 7.71 ft (0.7163 m) 22.24 ft (2.066 m) 0 to 6 deg SCM Ellipse 4P 1,800 rpm 6.25 g's

Phase

3 Phases

Scomi Equipment Inc

SCM-Ellipse 3P Shale Shaker

Specifications
General Model Ellipse Speed G Force Screens No. of Screens Non Blanked Area / Panel Screen Panel Area Non Blanked Screen Area Screen Angle Dimensions Length Width Height Weir Height Weight Net Utility Requirements Power Voltage Frequency 5 hp (2 x 2.5 hp) (3.73 kW / 2 x 1.86 kW) 380 / 460 V 50 / 60 Hz 3,800 lbs (1,723 kg) 100 (2,540 mm) 78.5 (1,994 mm) 70 (1,778 mm) 26.5 (673.1 mm) 3 5.56 ft (0.5165 m) 7.71 ft (0.7163 m) 16.68 ft (1.55 m) 0 to 6 deg SCM-Ellipse 3P 1,800 rpm 6 g's

Phase

3 Phases

Scomi Equipment Inc

Scomi Oiltools
Scomi Oiltools Screens

Scomi Equipment Inc

SCM-Extra Life Shaker Screens

Points of Discussion

Shaker Screen Design API Designation Screen Labels Screen Types

Scomi Equipment Inc

SCM-Extra Life Shaker Screens

SCM Shaker Screen Design Features & Benefits
Simple perforation pattern Rugged structural support Bonded to perforated panel

API RP 13C (ISO 13501) compliant

Triple layered sandwich construction Square Mesh Cloth utilized when available

Scomi Equipment Inc

SCM-Extra Life Shaker Screens

SCM Shaker Screen Design Features & Benefits
Ability to handle high flow rates Longer screen life Cut point integrity

Minimal screen blinding

Scomi Equipment Inc

SCM-Extra Life Shaker Screens

Screen Manufacturing

Capacity ->8,000 panels / month

Built in Two Locations Manufacturers Over 20 years experience in Shaker Screen Industry

Scomi Equipment Inc

SCM-Extra Life Shaker Screens

API Screen Designation
Screens Manufactured and Labeled in Accordance to API 13C (ISO 13501) API 13C is a D100 Separation
D100 Separation () > 462.5 to 550.0 > 390.0 to 462.5 > 327.5 to 390.0 API Screen Number API 35 API 40 API 45

> 275.0 to 327.5

> 231.0 to 275.0 > 196.0 to 231.0 > 165.0 to 196.0 > 137.5 to 165.0 > 116.5 to 137.5 > 98.0 to 116.5 > 82.5 to 98.0 > 69.0 to 82.5 > 58.0 to 82.5 > 49.0 to 58.0 > 41.5 to 49.0 > 35.0 to 41.5 > 28.5 to 35.0

API 50
API 60 API 70 API 80 API 100 API 120 API 140 API 170 API 200 API 230 API 270 API 325 API 400 API 450

All Screens Tested Independently by 3rd party

Scomi Equipment Inc

SCM-Extra Life Shaker Screens

API Screen Designation
Screen Cut Point & Designation for 500 Series Screens
Screen Label

API D100 * Cut Point (microns)

CONDUCTANCE* (Kd/mm)

SCM-D500-EL-A20 SCM-D500-EL-A35 SCM-D500-EL-A45 SCM-D500-EL-A60 SCM-D500-EL-A70 SCM-D500-EL-A80 SCM-D500-EL-A100 SCM-D500-EL-A120 SCM-D500-EL-A140 SCM-D500-EL-A170 SCM-D500-EL-A200 SCM-D500-EL-A230 SCM-D500-EL-A270 SCM-D500-EL-A325

862.2 517.8 377.2 260.3 207.8 176.1 142.5 120.1 99.2 85.6 73.3 63.4 53.8 48.8

9.01 7.96 6.72 5.87 2.06 1.77 2.06 1.48 1.22 0.76 0.62 0.51 0.39 0.38

* Cut point and Designation may be different for different Screen Types

Scomi Equipment Inc

SCM-Extra Life Shaker Screens

Screen Label - Nomenclature

SCM-D500-EL-A325
API Mesh

Screen Cloth

Shaker Reference
Scomi Brand

Scomi Equipment Inc

SCM-Extra Life Shaker Screens

Screen Label 500 Series Label ON Screen

Scomi Equipment Inc

SCM-Extra Life Shaker Screens

Extra Life Shaker Screens are available for a wide range of shakers MI Swaco Mongoose (MMNG) Derrick Equipment Company

500 series (D500)

2000 series (D4830) 300 series (D3630) NOV Brandt

King Cobra/Cobra (BCBR)

Venom (BVM) VSM 300 (B300) Other screens are available upon request

Scomi Equipment Inc

SCM-Extra Life Shaker Screens

Replacement Screens

Scomi Equipment Inc

SCM-Extra Life Shaker Screens

Replacement Screens

Scomi Equipment Inc

Scomi Oiltools
SCM-Degassers

Scomi Equipment Inc

SCM-Degassers
Specifications
SCM-VDG 1000
General Model Capacity Leaf Area Vacuum Dimensions Length Width Height Weight 101" (2,565 mm) 68" (1,727 mm) 79" (2,006 mm) 4,000 lbs (1,814 kg) SCM-VDG 1000 1000 gpm (3,785 lpm) 14,075 in (9.08 m ) up to 29 of Hg General Model Capacity Leaf Area Vacuum Dimensions Length Width Height Weight 101" (2,565 mm) 68" (1,727 mm) 79" (2,006 mm) 4,000 lbs (1,814 kg) SCM-VDG 1200 1200 gpm (4,542 lpm) 18,768 in (12.1 m) up to 29 of Hg

SCM-VDG 1200

Scomi Equipment Inc

SCM-A600 Atmospheric Degasser

Specifications
General Model Capacity Dimensions SCM-A600S SCM-A600D Weight SCM-A600S SCM-A600D 1,250 lbs / 567 kg 1,335 lbs / 605 kg 67 x 36 x 95 (1701mm x 914mm x 2,412mm) 67 x 36 x 116 (1,701 mm x 914 mm x 2,946mm) SCM-A600 S/D 600 gpm (2270 lpm)

Scomi Equipment Inc

Scomi Oiltools
SCM-Desander

Scomi Equipment Inc

SCM-Desander
Features & Benefits
Available in 1000 gpm (3785 lpm) and 1500 gpm (5678 lpm) configurations Removal sand sized particles (40 100 ) Adjustable apex Rugged polyurethane construction

Scomi Equipment Inc

SCM-Desander
Features & Benefits
High resistance to heat and abrasion Easy to operate and maintain Optional ceramic insert available to prolong cone life

Scomi Equipment Inc

SCM-Desander
Specifications
General Model Capacity Required Head Separation Cut point Optional Dimensions Vertical Desander 2 Cone/1,000 gpm Vertical Desander 3 Cone/1,500 gpm Weight 2 Cone 3 Cone 1,213 lbs (550 kg) 1,332 lbs (604 kg) 51.75 x 80.5 x 40.25 (1,314 mm x 2,051 mm x 1,022 mm) 61.75 x 80.5 x 40.25 (1,568 mm x 2,044 mm x 1,022 mm) SCM-Desander 500 gpm (1,893 lpm) per cone 75 ft (22.86 m) at the header manifold 40-100 microns Ceramic insert for increased wear resistance

Scomi Equipment Inc

Scomi Oiltools
SCM-Desilter

Scomi Equipment Inc

SCM-Desilter
Features & Benefits
Available in various inline or round configurations Processing rate up to 1200 gpm (4542 lpm) Removal of silt sized particles (12-74) Adjustable apex Rugged polyurethane construction

Scomi Equipment Inc

SCM-Desilter
Features & Benefits
High heat and abrasion resistance Optical ceramic insert to prolong the useful life of the cone Economical addition to the solid control system

Scomi Equipment Inc

SCM-Desilter
Specifications
General Model Capacity Required Head Separation Cut Point SCM-Desilter 60 gpm (227 lpm) per 4 cone 75 ft (22.86 m) at the header manifold 12 74 microns

Optional
Dimensions 8 Cone - 4 Vertical Desilter 480 gpm 10 Cone - 4 Vertical Desilter 600 gpm 12 Cone - 4 Vertical Desilter 720 gpm 16 Cone - 4 Vertical Desilter 960 gpm 16/20 Cone Round Desilter 960 / 1,200 gpm Weight 8 Cone Vertical 10 Cone Vertical 12 Cone Vertical 16 Cone Vertical 16/20 Cone Round

Ceramic insert for increased wear resistance

68 x 36.5 x 64 (1,727 mm x 927 mm x 1,626 mm) 78 x 36.5 x 64 (1,981 mm x 927 mm x 1,626 mm) 88 x 36.5 x 64 (2,235 mm x 927 mm x 1,626 mm) 97 x 36.5 x 64 (2,464 mm x 927 mm x 1,626 mm) 80 x 66.5 x 68 (2,032 mm x 1,689 mm x 1,727 mm) 750 lbs (340 kg) 900 lbs (408 kg) 1,050 lbs (476 kg) 1,500 lbs (680 kg) 2,481 lbs (1,125 kg)

Scomi Equipment Inc

Scomi Oiltools
SCM-PrimaG Mud Cleaner

Scomi Equipment Inc

SCM-PrimaG 4P Mud Cleaner

Models

SCM-PrimaG Mud Cleaner 2/16

2 x 10 Desander 16 x 4 Desilter

SCM-PrimaG Mud Cleaner 3/20

3 x 10 Desander
20 x 4 Desilter

Scomi Equipment Inc

SCM-PrimaG 4P Mud Cleaner

Specifications
General

Model
Speed G Force Screens No. of Screens Screen Area per Panel Screen Panel Area Non Blanked Screen Area Screen Angle Hydro Cyclone Desander Desilter Dimensions Length Width

SCM-PrimaG 4P Mud Cleaner

1,800 rpm 7.3 gs 4 5.56 ft (0.5165 m) 7.71 ft (0.7163 m) 22.24 ft (2.066 m) 0 to 6 deg 2 x 10 cones (1,000 gpm) 3 x 10 cones (1,500 gpm) 16 x 4 cones (960 gpm) 20 x 4 cones (1,200 gpm) 145 (3,683 mm) 72 (1,829 mm)

Height
Weir Height Weight Net Utility Requirements Power Voltage Frequency Phase

102 (2,591 mm)

31 (787.5 mm) 8,600 lbs (3,901 kg) 5 hp (2 x 2.5hp) (3.73 kW / 2 x 1.86 kW) 380 / 460 V 50 / 60 Hz 3 Phase

Scomi Equipment Inc

SCM-PrimaG 3P Mud Cleaner

Specifications
General

Model
Speed G Force Screens No. of Screens Screen Area per Panel Screen Panel Area Non Blanked Screen Area Screen Angle Hydro Cyclone Desander Desilter Dimensions Length Width

SCM-PrimaG 3P Mud Cleaner

1,800 rpm 7.3 gs 3 5.56 ft (0.5165 m) 7.71 ft (0.7163 m) 16.68 ft (1.55 m) 0 to 6 deg 2 x 10 cones (1,000 gpm) 3 x 10 cones (1,500 gpm) 16 x 4 cones (960 gpm) 20 x 4 cones (1,200 gpm) 116 (3,683 mm) 72 (1,829 mm)

Height
Weir Height Weight Net Utility Requirements Power Voltage Frequency Phase

102 (2,591 mm)

31 (787.4 mm) 7,800 lbs (3,719 kg) 5 hp (2 x 2.5hp) (3.73 kW / 2 x 1.86 kW) 380 / 460 V 50 / 60 Hz 3 Phase

Scomi Equipment Inc

Scomi Oiltools
SCM-Decanter Centrifuge

Scomi Equipment Inc

SCM-4800 VFD Decanter Centrifuge

Features & Benefits
Stainless steel rotating assembly

Replaceable plows to increase service life

Tungsten carbide scroll inserts for reduced maintenance costs and improved solids conveyance Hard-faced solids discharge ports Rugged construction and oilfield skid for the toughest environments Adjustable effluent ports for increased solids removal performance Variable frequency bowl and conveyor drives designed for infinite speed configurations

Scomi Equipment Inc

SCM-4800 VFD Decanter Centrifuge

Features & Benefits
Runs efficiently at high speeds for long periods of time for efficient solids separation Ideal for processing un-weighted or weighted drilling fluids Effective for high speed low gravity solids separation or for low speed high gravity solids recovery Torque overload protection shuts down feed pump to reduce packing off

Scomi Equipment Inc

SCM-4800 VFD Decanter Centrifuge

Scomi Equipment Inc

SCM-4800 VFD Decanter Centrifuge

Specifications
General Model Maximum Speed Maximum G Force Maximum Flow Bowl Diameter Bowl Length Bowl Material Conveyor Conveyor Lead & Pitch Gear Box Type Gear Box Ratio Gear Box Torque Torque Out Style Pool Depth Setting Controls Dimensions Length Width Height 102 (2,591 mm) 70 (1,778 mm) 62 (1,575 mm) 6,200 lbs (2,812 kg) 2,135 lbs (968.4 kg) 50 hp (37.3 kW) Main Drive 20 hp (14.92 kW) Back Drive 10 hp (7.42 kW) Pump 380 / 460 V 50 / 60 Hz SCM-4800 VDF 4,000 rpm 3,180 gs 150-200 gpm at 9.8 ppg 14 (355.6 mm) 48 (1,219 mm) 316 Stainless Steel E-Z flow design with axial or radial lights Single 4.25 3.5 Planetary 57-1 50,000 in lbs GS Coupling 4 Adjustable 360 degree dams Variable Frequency Drive

Weight
Net Control Panel Weight Utility Requirements Power Drive Voltage Frequency

Phase

3 Phase

Scomi Equipment Inc

SCM-5500 VFD Decanter Centrifuge

Features & Benefits
Stainless steel rotating assembly Replaceable wear inserts and plows to increase service life Tungsten carbide scroll inserts for reduced maintenance costs and improved solids conveyance Rugged construction and oilfield skid for the toughest environments Adjustable effluent ports for increased solids removal performance Variable frequency bowl and conveyor drives designed for infinite speed configurations

Scomi Equipment Inc

SCM-5500 VFD Decanter Centrifuge

Features & Benefits
Runs efficiently at high speeds for long periods of time for efficient solids separation Ideal for processing un-weighted or weighted drilling fluids Effective for high speed low gravity solids separation or for low speed high gravity solids recovery Torque overload protection shuts down feed pump to reduce packing off Vibration limit switches for increased safety

Scomi Equipment Inc

SCM-5500 VFD Decanter Centrifuge

Scomi Equipment Inc

SCM-5500 VFD Decanter Centrifuge

Specifications
General Model Maximum Speed Maximum G Force Maximum Flow Bowl Diameter Bowl Length Bowl Material Conveyor Conveyor Lead & Pitch Gear Box Type Gear Box Ratio Gear Box Torque Pool Depth Setting Controls Dimensions Length Width Height Weight Net 8,200 lbs (3720 kg) 149 (3,785 mm) 54 (1,372 mm) 53 (1,346 mm) SCM-5500 VDF 3750 rpm 3150 gs 250 gpm at 9.8 ppg 16 (406.4 mm) 55 (1,397 mm) 316 Stainless Steel Axial or Radial Flights Single 4.25" 15 Two Stage Planetary 53:1 36,000 in lbs 4 Adjustable 360 deg dams Variable Frequency Drive

Control Panel
Utility Requirements Power Drive Voltage Frequency Phase

2,135 lbs (968.5 kg)

60 hp (44.7 kW) Main Drive 20 hp (14.9 kW) Back Drive 20 hp (14.9 kW) Pump 380 / 460 V 50 / 60 Hz 3 Phase

Scomi Equipment Inc

SCM-CF2564 VFD Decanter Centrifuge

Scomi Equipment Inc

SCM-CF2564 VFD Decanter Centrifuge

Specifications
General Centrifuge Model Maximum Speed Maximum G Force Maximum Flow Bowl Diameter Bowl Length SCM-CF 2564 VDF 3,000 rpm 3,195 gs 550 gpm @ 9ppg 25 (635 mm) 64 (1626 mm)

Bowl Material
Conveyor Conveyor Lead & Pitch Gear Box Type Gear Box Ratio Gear Box Torque Pool Depth Setting Controls

Carbon Steel
Axial or radial flights Double 8 K-100 (planetary) 76:1 100,000 in lbs 0 to 4 Variable Frequency Drive 190 (4,826 mm) 83.5 (2,121 mm) 53.5 (1,359 mm) 16,390 lbs (7,434 kg) 2,680 lbs (1,216 kg) 150 hp (111.9 kW) Main Drive 40 hp (29.84kW) Back Drive 20 hp (14.92kW) Pump Drive 380 / 460 V 50/ 60 Hz 3 Phase

Dimensions
Length Width Height Weight Net Control Panel Utility Requirements Power Voltage Frequency Phase

Scomi Equipment Inc

Scomi Oiltools
SCM-Mud Cooler

Scomi Equipment Inc

SCM-Mud Cooler
Hot Side General Flow rate (Total) Flow rate (Unit) Inlet Temperature Outlet Temperature Maximum Temperature Total Heat Transfer Area Total Heat Exchanged Pump Max Flow Rate Plate Heat Exchanger Construction Material Weight Gross Weight* Net Weight**
*Typical operating weight (complete with fluid) ** Shipping weight

Cold Side 2,000 gpm 2,000 gpm 90 F (32 C) 126 F (52 C)

Specifications

1,000 gpm 1,000 gpm 185 F (85 C) 145 F (62 C)

260 F (127 C) 1147.36 ft (106.5 m) 35,960,728 Btu / H 11,956 L /m (2630 gpm) SB-265-I Titanium

The above Thermal Capacity can be increased or decreased to suit customers requirements

15,174 lb (6882 kg) 13,574 lb (6157 kg)

Dimensions INDIVIDUAL SKIDS MUD COOLER & PIPE MANIFOLD Length Width Height COMPLETE SYSTEM (2 SKIDS) Length Width Height Utility Requirements ELECTRICAL Voltage Phase Frequency Power Safety 380-460V 3 Phase 50-60 Hz 100 hp (75kW) Zone 1 /Explosion proof Electrics 150 (3810 mm) 75 (1905 mm) 100 (2540 mm) 75 (1911 mm) 75 (1911mm) 100 (2540 mm)

The above electrical specification is based on a typical Centrifuge pump. Others are available upon request.

Scomi Equipment Inc

Scomi Oiltools
SCM-Centrifugal Pump

Scomi Equipment Inc

SCM-Centrifugal Pump
Features & Benefits
Full and semi-open impellers Stainless steel casing nuts Inboard bearings consisting of high quality double row angular contact ball bearings or cylindrical roller bearings Outboard bearings consisting of two high quality single row angular contact ball bearings

Scomi Equipment Inc

SCM-Centrifugal Pump
Features & Benefits
Replaceable wear pads Each skid mounted pump package is designed to ensure job site ease of maintenance and serviceability Mechanical seals that combine tungsten carbide and Viton bellows to extend seal life

Scomi Equipment Inc

SCM-Centrifugal Pump
Specifications
General Model Frame Shaft Shaft Sleeve Casing Wear Pad Labyrinth Seals / Isolators Mechanical Seal SCM-Centrifugal Pump Cast Iron 4140 Low Alloy Steel 316 Stainless Steel Hard Iron / Cast Iron Hard Iron Bronze Heavy duty tungsten carbine with Viton bellows

Applications
Fresh Water Sea Water Drilling Mud Pump Sizes Available 3 4 5 6 6 8 8 x x x x x x x 2 3 4 5 5 6 6 x x x x x x x 13 13 14 11 14 11 14 inches inches inches inches inches inches inches

Motor Sizes Available 25 to 150 hp explosion proof motors Configurations Inline, over under pump packages and pump only
Scomi Equipment Inc

Scomi Oiltools
SCM-Agitators

Scomi Equipment Inc

SCM-Agitator Standard
Features & Benefits
Helical bevel gearing housed in rugged cast iron gearbox Each helical bevel gear stage is 98% efficient (13% more efficient than a typical worm gear) Lower seal arranged to accommodate grease pocket and create four-tier gearing protection. Lower bearing always stays in contact with uncontaminated lubricant

Scomi Equipment Inc

SCM-Agitator HELH
Oilfield supplied gear boxes
Scomi agitator manufacturers typically supply a gearbox used in many industrial applications The commercial gearbox supplied by Scomi manufacturers has the same gear ratio for all tanks and is rated by horsepower

Scomi Equipment Inc

SCM-Agitator HELH
Product Line Overview

Vertical

Horizontal

Scomi Equipment Inc

SCM-Agitator HELH
Vertical Drive Cutaway

Oil level Drywell

Scomi Equipment Inc

SCM-Agitator HELH
Features & Benefits
Vertical Agitator

Introduced in 1999, 100,000 sold

Designed exclusively for mixing Double and triple reduction vertical shaft drive L-10 Bearing 1000,000 hours Small footprint New box under design to support heavier shaft loads Positive Gear and Bearing Splash Lubrication provides oil to bearing and gears

Scomi Equipment Inc

SCM-Agitator HELH
Features & Benefits
Welded versus Cast gear box

The Scomi mixer is a fabricated welded box and is not a cast box supply by oilfield manufactures
Each Scomi box has a oil lip instead of seal for splash lubrication of the bearing and gears. The oil lip assure no oil can escape the gear box and contaminate the drilling fluids. The right angle gear box utilize a seal which could fail and leak oil into the drilling fluids

Output coupling below the gearbox provides easy access to shaft

Scomi Equipment Inc

SCM-Agitator HELH
Features & Benefits
Shaft Design Critical Speed Rotation speed corresponding to a natural frequency of a shaft/impeller system Operate below 80%

Shaft Stress
Shear Stress (Twisting) Tensile Stress (Elongation) Each shaft is straightened to tolerances for long seal life to less than 0.003 inches total run out per foot of shaft length, 0.25 per meter

Materials of Construction (Carbon Steel, Stainless Steel and others)

Scomi Equipment Inc

SCM-Agitator HELH
Impeller Design

High Efficiency Low Shear, High Pumping, Axial Flow Low HP draw

Straight Blade Low Shear, High Pumping, Axial Flow Higher HP draw Shallow tank (< 4 feet)

Canted (Oilfield) Low Shear, High Pumping, Mixed Axial/Radial Flow Higher HP draw than HE or Straight Economical design

Scomi Equipment Inc

Scomi Oiltools
SCM-DWM Drilling Waste Management Containment and Handling

Scomi Equipment Inc

Scomi Oiltools
SCM-Cuttings Vac

Scomi Equipment Inc

SCM-Rig Vac Vacuum System

Specifications
General Model Tank Capacity* Loading Capacity* Blower Capacity
*Typical Performance

RV 3500 1,590 L (10 bbls) 150 L / m (40 US gpm) 10 m / m (350 ft / m)

RV 3560 3,180 L (20 bbls) 380 L / m (100 US gpm) 24 m / m (850 ft / m)

RV 4500 2,385 L (15 bbls) 230 L / m (60 US gpm) 15.6 m / m (550 ft / m)

Weight

Power Unit
Tank & Skid Dimensions POWER UNIT Length Width Height

1,340 lbs (608 kg)

1,340 lbs (608 kg)

2,200 lbs (998 kg)

1,850 lbs (840 kg)

3,800 lbs (1725kg)

-

56 (1420 mm) 34 (860 mm) 52 (1320 mm)

78 (1980 mm) 48 (1220 mm) 80 (1680 mm)

186 (4725 mm) 60 (1520 mm) 60 (1520 mm)

ALSO AVAILABLE IN A DNV CERTIFIED CONTAINER OFFSHORE INSTALLATION

Tank

Length
Width Height Utility Requirements ELECTRICAL Power Voltage Phase Frequency Cooling Engine Type Fuel Consumption* Safety * Maximum demand

120 (3050 mm)

42 (1070 mm) 60 (1520 mm)

120 (3050 mm)

60 (1520 mm) 80 (2030 mm)

20 hp (15 kW) 380 / 460 V 3 50 /60 Hz -

60 hp (45kW)

47 hp (35 kW ) Air-Cooled 3 Cyl., Turbo Diesel 7.3 L / hr (1.9 US gph)

Explosion Proof Electrics

Scomi Equipment Inc

Scomi Oiltools
SCM-Small Vac

Scomi Equipment Inc

SCM-Hippo Vacuum Unit

Specifications
General Model Tanks Capacity Maximum Suction Construction Material (Valve, Frame, Valves & Fittings) Pump Type Standard Hose Length SCM-Hippo 30 Gallons 17.5 Hg SS316 Air operated double diaphragm 6 meters

Note: all parts are anti-static and conductive to avoid static electricity loading

Weight
Gross Weight* Net Weight** 695 lbs (315 kg) 440 lbs (200 kg)

* Typical operating weight (complete with fluid) ** Shipping weight

Dimensions Length Width 37 (940 mm) 27 (690 mm)

Height
Utility Requirements Air Supply Inlet Pressure Compressed Air Consumption

47 (1175 mm)

100 psi 100 cfm

Scomi Equipment Inc

SCM-CBP60
Features & Benefits
60 Litres tank capacity Intrinsically safe Delivers up to 21.5 of vacuum Low maintenance due to no moving parts within the tank Can handle solids up to 60 mm in size

Is safe having a vacuum non-return valve and pressure relief valve

Scomi Equipment Inc

SCM-CBP60
Features & Benefits
Improves workplace safety by allowing quick and easy cleanup of spillages

Wheel mounted allowing flexible location anywhere it is required

Versatile with suction distances up to 15 m and discharge distances in excess of 50 m Easy to operate with the timers, jet pack and air regulator all automatically controlled

Scomi Equipment Inc

Scomi Oiltools
SCM-Venturi System

Scomi Equipment Inc

SCM-Venturi System
Specifications
General Model Capacity Weight Net Weight (with hopper) Dimension Length Width Height Utility Requirements Water Drilling Fluid 76 L/m (20 US gpm) for flushing (intermittent) 2270 L/m (600 US gpm) via 6 x 5 centrifugal pump 75 (1,900 mm) 19 (490 mm) 55 (1,400 mm) 772 lbs (350 kg) SCM-Venturi Up to 20 tonnes / hr (in drilled cuttings mode)

Scomi Equipment Inc

Scomi Oiltools
SCM-Screw Conveyor

Scomi Equipment Inc

SCM-Screw Conveyor System

Specifications
General
Model Screw Conveyor Diameter 10 (254 mm) SCM-Screw Conveyor 12 (304.8mm) 14 (355.6 mm) 16 (406.4 mm)

Conveying Capacity*

25 tonnes/hr

45 tonnes/hr

70 tonnes/hr

110 tonnes/hr

* Figures based on 16 ppg (1.9 SG) drilled cuttings at 50 rpm and 40% trough loading. Higher rates are possible with increased rpm's

Weights
Drive section Mid section (s) End section 900 lbs (408 kg) 600 lbs (272 kg) 700 lbs (318 kg) 1,500 lbs (680 kg) 900 lbs (408 kg) 1,000 lbs (454 kg) 1,700 lbs (770 kg) 975 lbs (442 kg) 1,150 lbs (522 kg) 2,000 lbs (907 kg) 1,100 lbs (499 kg) 1300 lbs (590 kg)

Dimensions
DRIVE SECTION Length 150 (3810 mm) 174 (4,420 mm ) 174 (4,420 mm) 174 (4,420 mm)

Width
Height MID SECTION (S) Length Width Height END SECTION Length Width

16 (406 mm)
36 (910 mm) 120 (3,048 mm) 16 (406 mm) 16 (406 mm) 126 (3,200 mm) 16 (406 mm)

18 (460 mm)
36 (910 mm ) 144 (3,660 mm) 18 (460 mm) 18 (460 mm) 150 (3,810 mm) 18 (460 mm)

20 (508 mm)
36 (910 mm) 144 (3,660 mm) 20 (508 mm) 20 (508 mm) 150 (3,810 mm) 20 (508 mm)

22 (559 mm)
42 (1067 mm) 144 (3,660 mm) 22 (559 mm) 22 (559 mm) 150 (3,810 mm) 22 (559mm)

Height

16 (406 mm)

18 (460 mm)

20 (508 mm)

22 (559mm)

Utility Requirements
ELECTRICAL Voltage Phase Frequency Power** Safety 5.4 hp (4 kW) 7.4 hp (5.5 kW) 380/460 V 3 Phase 50/60 Hz 10 hp (7.5 kW)

10 hp (7.5 kW)

Explosion proof electrics

** Figures quoted are for a 7.3 m (24 ft) long conveyor I.e. a drive section and an end section

Scomi Equipment Inc

Scomi Oiltools
SCM-Drill Cutting Bins

Scomi Equipment Inc

SCM-Drill Cutting Bins

Specifications
General Model Volume Weights Gross weight Tare weight* SWL * Average Weight 1,7640 lbs (8,000 kg) 3,090 lbs (1,400 kg) 14,550 lbs (6,600 kg) SCM-Drill Cutting Bin 2.3 m (14.5 bbls)

Dimensions
Length Width Height 83 (2,100 mm) 71 (1,800 mm) 56 (1,350 mm) Weight Empty Container 3,090 lbs (1,400 kg) Deck Loading 21.7 lb/ft (106 kg/m)

Scomi Equipment Inc

Scomi Oiltools
SCM-Wet Pit Cleaning

Scomi Equipment Inc

SCM-CIP Clean in Place Tank Cleaning

Specifications
General Model Pump Capacity Tank Capacity Dosing Pump Instrumentation Screening Operating Pressure Nozzle Operating Volumes Dimensions Length Width Height (with Shaker) Weight Net Utility Requirements Voltage Phase Frequency Power Air Safety 380 / 460 V 3 Phase 50 /60 Hz 100 hp (75 kW) 100 psi Explosion Proof electrics suitable for zone 1 use. Supply hoses with embedded wired for electro-static deviation to earth. 18,000 lbs (8,165 kg) 240 (6,096 mm) 96 (2,438 mm) 165 (4,206 mm) SCM-CIP Dual Process Tank & Pump Skid 400 gpm at 250 psi 2 x 50 bbls Air Diaphragm Digital Flow Meter 2 x Digital Pressure Gauge Chemical Dosing Meter SCM-PrimaG 3P Shale Shaker 250 psi 100 gpm

Scomi Equipment Inc

SCM-CIP Clean in Place Tank Cleaning

Specifications

General Model Rotation Flow Pressure Rotational Speed Material Max Working Pressure SMC-CIP Non-Programmable Nozzle 360 60-100 gpm 70-150 psi (5-10 bar) 1.5-4 rpm AISI 316 10 bar (150 psi)

Scomi Equipment Inc

SCM-CIP Clean in Place Tank Cleaning

Specifications
General
Model Rotation Flow Pressure SMC-CIP Programmable Nozzle Adjustable 35-310 gpm 50-200 psi (3.5-13.8 bar)

Rotational Speed
Material Standard Length Tank Connection Weight

1-1.6 rpm
AISI 316 59.06 (1,500 mm) PN 16 DN 150 94.8 lb (43 kg)

Scomi Equipment Inc

SCM-CIP Clean in Place Tank Cleaning

Dockside Tank Cleaning

Shaker Multi-pump Skid 100 bbls of tanks 2-4 Pumps to clean multiple tanks at once Hydraulic submersible return pumps Nonprogrammable & Programmable Nozzles
Scomi Equipment Inc

SCM-Portable CIP Clean in Place Tank Cleaning

General

Specifications

Model Pump Capacity

SCM-CIP Portable 200 gpm at 250 psi

Tank Capacity
Dosing Pump Instrumentation Operating Pressure Nozzle Operating Volumes Dimensions Length Width Height Weight Net Utility Requirements Voltage Phase Frequency Power Air

2 x 20 bbls
Air Diaphragm Digital Flow Meter 2 x Digital Pressure Gauge Chemical Dosing Meter 250 psi 100 gpm

120 (3,048 mm) 96 (2,438 mm) 102 (2,591 mm)

12,000 lbs (5,443 kg)

380 / 460 V 3 Phase 50 /60 Hz 50 hp (37.3 kW) 100 psi Explosion Proof electrics suitable for zone 1 use. Supply hoses with embedded wired for electro-static deviation to earth.

Safety

Scomi Equipment Inc

SCM-Portable CIP Clean in Place Tank Cleaning

Specifications

General Model Rotation Flow Pressure Rotational Speed Material Max Working Pressure SMC-CIP Portable Non-Programmable Nozzle 360 60-100 gpm 70-150 psi (5-10 bar) 1.5-4 rpm AISI 316 10 bar (150 psi)

Scomi Equipment Inc

SCM-Portable CIP Clean in Place Tank Cleaning

Specifications
General
Model Rotation Flow Pressure SMC-CIP Portable Programmable Nozzle Adjustable 35-310 gpm 50-200 psi (3.5-13.8 bar)

Rotational Speed
Material Standard Length Tank Connection Weight

1-1.6 rpm
AISI 316 59.06 (1,500 mm) PN 16 DN 150 94.8 lb (43 kg)

Scomi Equipment Inc

Scomi Oiltools
SCM-MSB Mixing Shearing & Blending

Scomi Equipment Inc

SCM-MSB Mixing, Shearing & Blending

Introduction Existing Mixing/Shearing/Blending systems are separate devices

Mixing Hopper
Shearing Device Blending

Scomi Equipment Inc

SCM-MSB Mixing, Shearing & Blending

Specifications
General Model FEED REQUIREMENTS Volume Pressure (Head) Low Shear High Shear 228 m/hr (1000 GPM) 114 m/hr (500 GPM) SCM-MSB 150

30.5 - 39.6 m (100 - 130 ft)

* Centrifugal Pump and Power Unit not included Weight Gross (inc. hoses) Net Dimensions Length Width Height 164 (4,166 mm) 100 (2,540 mm) 58 (1,473 mm) 3,300 lbs (1,500 kg) 3,080 lbs (1,400 kg)

Scomi Equipment Inc

SCM-MSB Mixing, Shearing & Blending

System Options
Electrically driven centrifugal pump comes with explosion-proof motor, starter and skid Diesel driven centrifugal pump comes with skid Pre-mix tank comes with mud guns, walkways, handrails, stairway, piping and skid Optional agitators for pre-mix tank Vacuum attachment for recovering spillage's Bulk hopper connection

Automated versions available

Scomi Equipment Inc

Scomi Oiltools
SCM-CBP 800 Cutting Blowing Pump

Scomi Equipment Inc

DWM - Automated Dense Phase Cuttings Conveyance

Specifications
General
Model Capacity Cycle Time Vacuum SCM-CBP 800 200 L Twin Tanks 10-12 seconds 23 Hg Oil Free Air Compressor 28m/min - 44m/min (1,000 cfm 1,550 cfm) 637 hp (475 kW) Electric powered unit available 36 m 2,392 lbs (1,085 kg) 23,148 kg (10,500 kg) 28,660 lbs (13,000 kg)

Air Compressor*
Type Typical output Power Options

Bulk Storage Tank

Capacity

Weight
Cuttings Blowing Pump Air Compressor Bulk Storage Tank (Empty) *Based on diesel Unit

Scomi Equipment Inc

DWM - Automated Dense Phase Cuttings Conveyance

Specifications Cont.

Dimension Cuttings Blowing Pump Length 83 (2,100 mm)

Width
Height Air Compressor* Length Width Height Bulk Storage Tank Length

57 (1,450 mm)
77 (1,965 mm) 240 6,096 mm) 96 (2,438 mm) 104 (2,642 mm) 197 (5,000 mm)

Width
Height Utility Requirements

142 (3,600 mm)

98 (2,500 mm)

Cuttings Blowing Pump Air Safety Air Compressor* Power Fuel Consumption Idle Speed Full Load Safety *Based on a diesel unit 14 Liters/ hour 80 Liters/ hour Suitable for safe area use 637 hp (475 kW) 750 cfm at 8 bar ATEX compliant for use in Zone 1 areas

Scomi Equipment Inc

Scomi Oiltools
SCM-Extractor

Scomi Equipment Inc

SCM-Extractor Cuttings Dryer

Features & Benefits
Can be used for all drilling wastes Horizontal basket easier access for feed and maintenance Scroll internal scroll controls solids retention time Screen proprietary, conical screen design minimizes bridging and blinding while providing enhanced tolerance of lost-circulation material

Scomi Equipment Inc

SCM-Extractor Cuttings Dryer

EXTRACTOR Operating Capacity
160.0 140.0

120.0

100.0

6.5 8.5

BBLs / Hr

80.0

12.25 14.75 17.5

60.0

20

40.0

20.0

0.0 25 50 75 100 125 150 175 ROP 200 225 250 275 300 325 350

Scomi Equipment Inc

SCM-Extractor Cuttings Dryer

Advantages
Unsurpassed product discharge moisture due to a combination of high G Force and close flight-to-screen tolerance More capacity per energy unit used Less particle breakage and longer screen life, due to machined scroll flights Prevention of imbalance due to even distribution of cuttings by the scroll More capable of handling shock loads caused by feed surges Lower cost installation due to smaller footprint than vertical machines

Scomi Equipment Inc

SCM-Extractor Cuttings Dryer

More than a single asset
Providing a dryer package allows Oiltools to add additional existing rental assets that we provide on a daily basis Cuttings Conveyors Centrifuges Pumps & Vacuums The Cuttings Dryer market is not overly price sensitive Oiltools is not the least expensive provider on the block We provide these assets at list price If the customer remains in compliance, the pricing pressure that we see on single unit rentals is not there

Scomi Equipment Inc

SCM-Extractor Cuttings Dryer

More than a single asset
To provide a complete package, we are being forced into other areas of the waste management market Vacuums to move cuttings Vacuum lids Pressure washers

Scomi Equipment Inc

SCM-Extractor Cuttings Dryer

Feed Inlet surfaced with Ceramic Tile: Extensive wear protection installed throughout the unit

Scomi Equipment Inc

SCM-Extractor Cuttings Dryer

Balanced Screen Frame

The machined screen cage forces the screen to conform to a perfect circle. This perfect roundness allows the flight/screen distance to be closer than the CSI product thus producing a drier discharge.
Scomi Equipment Inc

SCM-Extractor Cuttings Dryer

Typical Installation

SCREW CONVEYOR

FHD Centrifuge Decanting Centrifuge

Progressive Cavity Cuttings Pump Progressive Cavity Cuttings Pump

(Optional)

Clean mud to Active Clean mud to Active

Centrifuge Feed Pump

Centrifuge Feed Pump

Dry Dry Cuttings Cuttings Overboard Overboard

Process FLow Flow Process Diagram Diagram (Typical) (typical)

Scomi Equipment Inc

SCM-Extractor Cuttings Dryer

Cuttings Pump 250 gpm

Feed Systems

Although other companies use them, we tend to rely upon them more frequently than our competitors. They become problematic when run too dry, without additional liquid.

Scomi Equipment Inc

SCM-Extractor Cuttings Dryer

Cuttings Conveyance Auger

Scomi Equipment Inc

Scomi Oiltools
SCM CEC
Chemically Enhanced Centrifugation

Scomi Equipment Inc

SCM-CEC Chemically Enhanced Centrifugation

Application
The Scomi Oiltools CECTM System is used to remove colloidal particles from non-emulsified fluids such as water based drilling fluids that are too small to be removed by a decanting centrifuge By employing chemical techniques the colloidal particles assume the size and mass that facilitates separation by a decanting centrifuge

Scomi Equipment Inc

SCM-CEC Chemically Enhanced Centrifugation

Specifications
General Model Centrifuge* (normally mounted above the FCU) Type Bowl Speed Scroll Speed Model OIL20-AP208.IE 2 end doors, 1 entrance door c/w floor drain, non-slip walkway, electric fan, air-conditioning unit, lighting and electrical sockets, stainless steel and PVC pipework, and a work / lab area. 2 x Flocculant (1 standby) 2 x Coagulant (1 standby) 2 x Centrate (1 for dilution and the other for dirty water) Flocculent 1 x make up tank consisting of 2 chambers (each with 1000 L capacity) Coagulant 1 x make up tank (1000 L) Centrate 1 x tank consisting of 2 chambers (each with 250L capacity) c/w filter basket 1 2 1 1 x x x x Dilution Unit Dispersion Units Injection Spool Inline Static Mixer SCM-CEC Chemically Enhanced Centrifugation Full Hydraulic Drive with instantly and infinitely variable bowl and scroll drive 0 4,000 rpm 1 90 rpm

Container

Pump Flocculation And Coagulation (FCU) Unit

Tanks

Mixing

Safety

Fire extinguisher, first aid kit, eye protection equipment

Scomi Equipment Inc

SCM-CEC Chemically Enhanced Centrifugation

Specifications Cont.

Dimensions and Weights

Centrifuge * Length Width Height Height (inside) Weight 102 (2,591 mm) 70 (1,778 mm) 62 (1,575 mm) n/a 6,200 lbs (2,812 kg) FCU 240 (6,058 mm) 96 (2,438 mm) 102 (2,591 mm) 90 (2,300 mm) 1,8519 lb (8,400 kg )

Utility Requirements
Electrical Maximum power required Water Voltage Phase Frequency Safety
* Values given are for a SCM-4800 Centrifuge. Note: Stainless steel or PVC pipe is used throughout the system.

50 hp (37 kW) 95 L/m (25 US gpm) approx for dilution 380 / 460 V 3 Phase 50 / 60 Hz

30 hp (22 kW) 114 L/m (30 US gpm) approx-for dilutions

Explosion proof electrics

Scomi Equipment Inc

Scomi Oiltools
SCM-Filtration

Scomi Equipment Inc

SCM-VPL DE Vertical Pressure Leave

6800 Filtration

Applicable for the following operations Water Injection Pipeline flushing Cooling Water
Scomi Equipment Inc

Sea Water Intake Pre-filtration RO

SCM-VPL DE Vertical Pressure Leave

Features & Benefits
6800 Filtration

High flow rates (up to 4400 m/hr/single unit Very wide filtration range: 10 micron to 3500 micron Self Cleaning: dP, timer, dP/timer and continuous

Flow Rate up to 11000 m/hr

Scomi Equipment Inc

SCM-VPL DE Vertical Pressure Leave

Features & Benefits
6800 Filtration

Uninterrupted flow and continuous filtration during cleaning Effective cleaning of the total filtration area even at minimum pressure Minimum flush, less than 1% of total flow is used for cleaning Compact, simple, reliable, robust, low maintenance and easy to operate Special design for oilfield operations Fully automatic operation

Scomi Equipment Inc

SCM-VPL DE Vertical Pressure Leave

Specifications
General Model Dimensions Weight Flow Rate SCM-VPL DE Vertical Pressure Leave 4m x 4m x 4.8m (13 ft x 13ft x 14.75ft) 1800 kg (empty) 3400 kg (in operation) 2650 m/hr 50m/hr (flow for cleaning) 29 psi-working pressure 7.25 psi-Differential Pressure 150 psi-Maximum Pressure

Pressure

Design Codes
Vessel Material Power Requirements

Vessel-ASME VIII div1

Carbon Steel, Rubber Lined, Internals-SS 316 4 x 0.75 kw (1 HP) Total-3kw (4 HP) ATEX (zone I + II) 110v, 220v, 380v, 480v

Standard Screens

Micron-10, 25, 50, 80, 100, 200, 300, 500

Scomi Equipment Inc

Scomi Oiltools
SCM-Bioremediation

Scomi Equipment Inc

SCM-Drill Cuttings Bioremediation

Bioremediation Process
The drill cuttings are fed into the process cells along with sand and sawdust. The drill cuttings, sand and sawdust are tilled until thoroughly mixed A microbe and nutrient solution is sprayed over the cuttings During the process the mixture is sprayed and tilled regularly, until measured OOCs are less than 1% Onec the oil content of the mixture has fallen to acceptable levels seeds are planted into what is now referred to as a growing medium Once the plants have grown, toxicity levels are tested to prove that the bioremediated drill cuttings are fit for disposal

Scomi Equipment Inc

Scomi Oiltools
SCM-Hammer Mill Thermal Treatment

Scomi Equipment Inc

SCM-Hammer Mill Thermal Treatment

Features & Benefits
Reduces oil on cuttings to <1% Compact Energy efficient Base oil recovered for reuse

Low emissions
Indirect Thermal Desorption 715 kW system can process 3 5 MT / hour Larger and small unit available Safe and reliable

Scomi Equipment Inc

SCM-Hammer Mill Thermal Treatment

Scomi Equipment Inc

SCM-Hammer Mill Thermal Treatment

The Hammer Mill
STATOR ROTOR VAPOURS OUTLET

MATERIAL INLET

MECHANICAL ENERGY INPUT

MATERIAL BED SOLIDS OUTLET SOLIDS OUTLET

Scomi Equipment Inc

SCM-Hammer Mill Thermal Treatment

Scomi Equipment Inc

Scomi Oiltools
SCM-Closed Loop Systems

Scomi Equipment Inc

SCM - Closed Loop Systems

Process Recommendations

Reduce Trucking, CO2 Emissions & Diesel Usage

ENVIROMENTAL Compliance On site

Recycle Fluids on Site

Scomi Equipment Inc

SCM - Closed Loop Systems

Site Reduction Process

Less surface area required for location

Drying shakers to reclaim usable Fluids

Recycled Fluids maintained with Centrifuges

Scomi Equipment Inc

SCM - Closed Loop Systems

High-G Drying Shakers
To increase a drilling rigs ability to drill faster and recover more drilling fluids Scomi Oiltools has several types of High-G Shakers 4 panel & 3 panel High-G Drying shakers, which allow the customer to drill faster without driving up disposal and mud cost that consistently drive up cost

Scomi Equipment Inc

SCM - Closed Loop Systems

High-G Shakers & Service
Understanding todays market and personnel needs Scomi Oiltools Service Personnel are experienced in maintaining rig shakers This is very important to assist in reducing fluid loss, solids interring back into the drilling fluids thus causing rig down time from liners and down hole tools Some screens are repairable on site, so instead of throwing the screen away, it is repaired and used again to assist in screen cost

Scomi Equipment Inc

SCM - Closed Loop Systems

Screens
Scomi uses screen tracking sheets which accounts for hours on each screen When these tracking sheets are maintained properly the customer is able to show the screen supplier evidence of screens which failed to meet the manufactures minimum hours of use This adds value to Scomis services

Scomi Equipment Inc

SCM - Closed Loop Systems

Screens
Recycling of all screens from each location

The flat panel screens can be patched and extend the life of some of the screens
Once Screens have finished their life cycle they are cleaned and palletized for recycling pick up at each site

Scomi Equipment Inc