This document summarizes the HLC sleeve anchor system. It includes various head styles and sizes ranging from 6.5mm to 20mm diameters. The anchors are made of galvanized carbon steel and are designed for use in concrete and solid brick. Fire resistance testing and approvals are noted. Design load values are provided for tensile and shear strength based on concrete compressive strength. Installation instructions include drill bit sizes, embedment depths, and torque specifications.
This document summarizes the HLC sleeve anchor system. It includes various head styles and sizes ranging from 6.5mm to 20mm diameters. The anchors are made of galvanized carbon steel and are designed for use in concrete and solid brick. Fire resistance testing and approvals are noted. Design load values are provided for tensile and shear strength based on concrete compressive strength. Installation instructions include drill bit sizes, embedment depths, and torque specifications.
This document summarizes the HLC sleeve anchor system. It includes various head styles and sizes ranging from 6.5mm to 20mm diameters. The anchors are made of galvanized carbon steel and are designed for use in concrete and solid brick. Fire resistance testing and approvals are noted. Design load values are provided for tensile and shear strength based on concrete compressive strength. Installation instructions include drill bit sizes, embedment depths, and torque specifications.
This document summarizes the HLC sleeve anchor system. It includes various head styles and sizes ranging from 6.5mm to 20mm diameters. The anchors are made of galvanized carbon steel and are designed for use in concrete and solid brick. Fire resistance testing and approvals are noted. Design load values are provided for tensile and shear strength based on concrete compressive strength. Installation instructions include drill bit sizes, embedment depths, and torque specifications.
Anchor version HLC Hex head nut with pressed-on washer Bolt version with washer
Benefits HLC offers various head shapes and fastening thicknesses.
HLC-H
HLC-L
Torx round head Torx Counter sunk head Loop hanger head, eyebold closed Loop hanger head, eyebold open Ceiling hanger
HLC-SK
HLC-EC
HLC-EO
HLC-T
Concrete
Solid brick
Fire resistance
Approvals / certificates Description Fire test report Assessment report (fire) Authority / Laboratory IBMB, Braunschweig warringtonfire No. / date of issue PB 3093/517/07-CM / 2007-09-10 WF 166402 / 2007-10-26 & suppl. WF 172920 for HLC-EC
Basic loading data (for a single anchor)
All data in this section applies to - Correct setting (See setting instruction) - No edge distance and spacing influence - Concrete as specified in the table - Steel failure - Minimum base material thickness - Concrete C 20/25, fck,cube = 25 N/mm
Recommended loads Anchor size Tensile Nrec Shear Vreca) a)
6,5 [kN] [kN] 0,8 1,3
8 1,4 2,8
10 1,8 3,5
12 2,9 5,7
16 4,0 7,9
20 5,3 7,9
a) With overall partial safety factor for action J = 1,4. The partial safety factors for action depend on the type of loading and shall be taken from national regulations. According ETAG 001, annex C, the partial safety factor is JG = 1,35 for permanent actions and JQ = 1,5 for variable actions.
Materials Material quality Part HLC HLC-EC HLC-EO Anchor HLC-H HLC-L HLC-SK HLC-T Material Carbon steel minimum tensile strength 500MPa galvanised to min. 5 m
6,5 x 25/5 6,5 x 40/20 6,5 x 60/40 8 x 40/10 8 x 55/25 8 x 70/40 8 x 85/55 10 x 40/5 10 x 50/15 HLC, HLC-H, HLCEC/EO carbon steel anchors 10 x 60/25 10 x 80/45 10 x 100/65 12 x 55/15 12 x 75/35 12 x 100/60 16 x 60/10 16 x 100/50 16 x 140/90 20 x 80/25 20 x 115/60 20 x 150/95 6,5 x 45/20 6,5 x 65/40 6,5 x 85/60 8 x 60/25 8 x 75/40 HLC-SK carbon steel anchors 8 x 90/55 10 x 45/5 10 x 85/45 10 x 105/65 10 x 130/95 12 x 55/15
162
1 / 2009
HLC | Sleeve anchor
Setting Installation equipment Anchor size Rotary hammer Other tools 6,5 10 12 16 TE 2 TE 16 hammer, torque wrench, blow out pump 8 20
Setting instruction
For detailed information on installation see instruction for use given with the package of the product.
Setting details HLC
Thread Diameter Nominal diameter of drill bit Cutting diameter of drill bit Depth of drill hole HLC Width across nut flats HLC-H HLS-SK Diameter of clearance hole in the fixture Effective anchorage depth Max. torque moment concrete Max. torque moment masonry d do dcut h1 SW SW Driver df hef Tinst Tinst [mm] [mm] [Nm] [Nm] [mm] [mm] [mm] [mm] [mm] [mm] 6,5 6,5 (1/4) 6,4 30 8 PZ 3 7 16 5 2,5 8 8 8,45 40 10 T 30 10 26 8 4 10 10 10,45 50 13 T 40 12 31 25 13 12 12 12,5 65 15 17 T 40 14 33 40 20 18 41 50 25 21 41 80 16 16 16,5 75 19 20 20 20,55 85 24
