Astra Hd8 8x4
Astra Hd8 8x4
Astra Hd8 8x4
3343(*)
35 (*)
31
P
X K1 K2
300
3238(*)
(*) Unloaded
S
UPON REQUEST
UNLOADED
H
LOADED
TURNING DIAMETER
A B C D E F G H
WEIGHT (kg)
wheelbases
Distribution net weight(*)
rd th NET 1st axle 2nd axle 3 +4 WEIGHT axle
Max. technical weight 1st+2nd axle 3rd+4th axle Combination Gross Vehicle weight Gross weight
A B C D E F G H
32000
50000(2)
104000
(*)Weight including oil, fuel, spare wheel, driver Kg.75. (1)With tyres 1st axle 385/65R22,5 160J or 365/85R20164G. Other tyres available, subject to verification with the Astra technical office (2)HD8 84.45,HD8 84.50 and HD8 84.54 max. speed 50 kph. Pirelli/Michelin tyres. Higher speeds are permitted with load reductions, subject to verification with the Astra technical office
05-2005 ENGLISH
Technical data and general specifications - validity to be checked for the individual countries concerned
ENGLISH
Chassis 8x4
ENGINES
CURSOR 13 TURBO INTERCOOLER type with electronic injection pump. Single block cylinder head, four valves per cylinder, light alloy pistons. Method: diesel injection/cycle Total displacement: 12.882 cm3. Bore per stroke: 135 x 150 mm. 6 in-line cylinders. Water cooling. Viscostatic cooling fan. Dry air filter with safety cartridge. Vertical discharge silencer.
84.36
Model Max. power (EEC) Corresponding rpm Max. torque (EEC) Corresponding rpm Turbine 265 kW ( 360 HP) 2.100 rpm 1.700 Nm (173 Kgm) 1.000-1.440 rpm WG Waste Gate
84.40
294 kW (400 HP) 2.100 rpm 2.000 Nm (204 Kgm) 1.000-1.440 rpm
84.45
330 kW (450 HP) 2.100 rpm 2.100 Nm (214 Kgm) 1.000-1.440 rpm
84.50
367 kW (500 HP) 2.100 rpm 2.200 Nm (224 Kgm) 1.000-1.440 rpm
84.54
397 kW (540 HP) 1.900 rpm 2.350 Nm (240 Kgm) 1.000-1.690 rpm
IVECO F3B E0681J B IVECO F3B E0681H B IVECO F3B E0681D B IVECO F3B E0681K B IVECO F3B E0681A B
GEARBOX
Manual gear ZF 16 S 151 for HD8 84.36 / ZF 16 S 181 OD for HD8 84.40 and for HD8 84.45 / ZF 16 S 221 for HD8 84.50 / ZF 16 S 221 OD for HD8 84.54 - with servoshift, 16 synchronised forward speeds + 2 reverse Upon request: ASTRONIC gearbox with Intarder for HD8 84.45 and for HD8 84.50.
13 6 5 16 RM RM 7 2 1 3 8 14 11 9 10 12 15 4 16,47 13,86 11,32 9,52 7,79 6,56 5,45 4,58 3,59 3,02 2,47 2,08 1,70 1,43 1,19 1,00 15,42 12,97
1:3,793
8,2 10,1 12,0 14,6 17,3 20,9 24,8 31,7 37,7 46,1 54,7 66,9 79,6 95,6 113,8 7,4 7,4 6,2 5,6 5,1 4,7 9,0 7,6 6,9 6,3 5,8 10,7 13,1 15,6 18,7 22,3 28,4 33,8 41,3 49,1 60,0 71,4 85,8 102,0 6,6 9,0 8,2 7,4 6,9 11,1 13,1 15,8 18,8 24,0 28,5 34,9 41,4 50,7 60,2 72,4 86,2 5,6
ZF 16 S 151 ZF 16 S 221
10,0 11,8 14,2 17,0 21,6 25,7 31,4 37,3 45,7 54,3 65,2 77,6 5,0 9,1 10,8 13,0 15,5 19,7 23,4 28,7 34,0 41,6 49,5 59,5 70,8 4,6 8,4 10,0 12,0 14,3 18,2 21,7 26,5 31,5 38,5 45,8 55,0 65,5 4,2
Gear ratios
13,80 11,54 9,49 7,93 6,53 5,46 4,57 3,82 3,02 2,53 2,08 1,74 1,43 1,20 1,00 0,84 12,92 10,80 8,2 7,4 6,2 5,6 5,1 4,7 9,9 12,0 14,3 17,4 20,8 24,9 29,8 37,7 45,0 54,7 65,4 79,6 94,8 113,8 135,4 8,6 8,8 10,8 12,9 15,6 18,7 22,3 26,7 33,8 40,3 49,1 58,6 71,4 85,0 102,0 121,5 7,9 7,5 6,7 6,1 5,7 9,1 10,9 13,2 15,8 18,9 22,6 28,5 34,1 41,4 49,5 60,2 71,8 86,2 102,6 6,7 8,2 7,5 6,9 9,8 11,9 14,2 17,0 20,3 25,7 30,7 37,3 44,6 54,3 64,7 77,6 92,4 6,0 10,3 9,4 8,0 7,2 6,6 6,4
1:3,793
ZF 16 S 181 OD ZF 16 S 221OD
8,9 10,8 13,0 15,5 18,5 23,4 28,0 34,0 40,7 49,5 59,0 70,8 84,3 5,5 8,3 10,0 12,0 14,3 17,1 21,7 25,9 31,5 37,6 45,8 54,6 65,5 78,0 5,1
P.T.O.
Upon request: Transmission power take off Gearbox
P.T.O. ZF N 71/1B ZF N 71/1C ZF N 71/2C ZF N 221/10+N353/1c ZF 16 S 151 - ZF 16 S 221 Ratio 0,77/0,91:1 0,77/0,91:1 1,01/1,21:1 1,47/1,76:1+0,77/0,92:1
Max. torque. ZF 16 S 181 OD Application Ratio Nm. For tipping unit pumps - For water, hydraulic pumps, etc.... 1000 0,91/1,09:1 For tipping unit pumps - For water, hydraulic pumps, etc.... 0,91/1,09:1 1000 For tipping unit pumps - For hydraulic pumps, etc.. 1,21/1,44:1 300 1,75/2,09:1+0,91/1,09:1 560+600 double PTO for cements pumps
ZF NMW 221 Power take-off (ratio 1,55:1) max available torque 1300 Nm x cement pumps (not with intarder) Power take off on distribution (ratio. 1,14:1) max usable torque 800 Nm (not with intarder). Power take off at flywheel (ratio1.29:1) max available torque 900 Nm x cement mixers.
Technical data and general specifications - validity to be checked for the individual countries concerned
CLUTCH
Single dry plate, diameter 17. Pull type engagement with diaphragm spring. Hydro-pneumatic power steering engagement control, with driven disk wear recovery slave cylinder.
TYRES
TRANSMISSION
Manual, with tubular shafts fitted with toothed flange universal joints.
Possible combinations to be checked with ASTRA technical office: TYRES 13 R 22,5 156/150G 12 00 R 20 156/150G 315/80 R 22,5 156/150G 365/85 R 20 164G 13 R 22,5 156/150G 12 00 R 20 156/150G 385/65 R 22,5 158K 315/80 R 22,5 156/150G S single D double S D S D S D ASSEMBLY FRONT REAR
AXLES
FRONT: Steering, not drive type in high tensile pressed steel. Wheel stud protection. REAR: Two drive axles in tandem with dual reduction, central by bevelled pair and final by epicyclical group in wheel hubs. The intermediate axle is fitted with distributor that distributes torque between the two axles Differential lockable by pneumatic control from driver's seat. The tandem is anchored to the chassis by silent block mounted torque arms. On request: Rear-axle ratio 1:3.793 Rear-axle ratio 1:4.229 Rear-axle ratio 1:5.009 Rear axle ratio: 1:5,558 Rear-axle ratio 1:6.095 Rear-axle ratio 1:6.588
PNEUMATIC SYSTEM
Two-cylinder 630 cc compressor , APU (Air Processing Unit) that includes: regulation valve set at 10.3 bar, drier, 4-way safety valve, pressure reduction valve for parking circuit and services, 2 sockets for parking brakes release and drawing air in cab. 3 air tanks, capacity 30 litres + 2 with capacity 20 litres. ABS system and EBL (Electronic Brake Limiter).
SUSPENSIONS
FRONT: 1st and 2nd axles, leaf springs with bushes, 3 26x90 mm leaves, chord 1600 mm, with hydraulic shock absorbers. Stabiliser bar as standard on 1st axle. On request: Stabiliser bar on 2nd axle. REAR Parabolic springs, swivelling on central pin: 4 40x100 leaves, chord 1400 mm, supplemented by torque bars and stiffening brackets. Stabiliser bar as standard on 4th axle. On request: Stabiliser bar on 3rd axle. Extra-reinforced semi-elliptical leaf springs, 10 25x100 mm leaves, chord 1400 mm. Light parabolic leaf springs for legal vehicle, 3 40 x 100mm leaves, chord 1400 mm.
BRAKES
Front and rear "duo-duplex" self-adjusting wedge type brakes with automatic play take-up. Total net braking surface: 12.368 cm2. ABS as standard. Service brake: Pedal controlled air brake, acting on all wheels. Non-towing vehicles, two independent circuits, one for 1st and 2nd axle, one for 3rd and 4th axle; category 1 wheel anti-lock system. Towing vehicles, three independent circuits, one for 1st and 2nd axle, one for 3rd and 4th axles and another for the trailer; category 1 wheel anti-lock system. Emergency brake: Incorporated in service brake. Parking brake: Manual spring-type mechanical with pneumatic control acting on 3rd and 4th axle wheels. IVECO BRAKE TURBO engine brake: HD8 360 hp braking power 200 kW (272 hp) HD8 400/450/500/540 hp braking power 255 kW (347 hp) On request: Hydraulic intarder (84.40 / 84.45 / 84.50 / 84.54). 1st axle immobiliser system. ABS OFF/ROAD button for speed < 15 kph, 1st and 2nd axles.
CHASSIS
In steel with high elasticity limit consisting of two flat paralle side members (width 820 mm.) with C section (320x90x10 mm), jointed by nailed R.B.M. (Rail Bending Moment) cross members : 202.020 Nm (20.593 Kgm.). Front bumpers in steel with headlamp protection grids, front manoeuvring hook, rear underrun bar, steel fuel tank, capacity 300 litres. Upon request: Rear underrun bar in set back position. Extra long underrun bar for cement mixer. Rear manoeuvring hook. Rear automatic towing hook. Rubber mudguards on 2nd and 3rd axles. Side windlass for spare wheel.
Technical data and general specifications - validity to be checked for the individual countries concerned
ENGLISH
8x4
ENGLISH
Chassis 8x4
FRONT: 13R22,5 156/150 G Single tubeless REAR: 13R22,5 156/150 G Twin tubeless Spare wheel on chassis.
STEERING
ZF 8099 quadrilateral power steering on front axle wheels with variable ratio 1:22.2/1:26.2 with auxiliary cylinder. Circuit with main hydraulic pump on engine and emergency pump on gearbox. Steering rods with self-lubricating joints. height and inclination adjustable steering column.
CAB
White cab with hydraulic tipping. Built in stamped fibreglass with tubular steel armature. Head on more demanding off road routes. Cab suspension with guiding arms, spiral springs, double action shock absorbers, anti-roll bar and end-of-stroke pads. Internal panels completely washable and fireproof. 4-speed ventilation and heating system with air recirculation system. Collapsible first step. Electric window risers on driver and passenger sides. Yellow rotary halogen lamps on cab roof. Driver's seat with pneumatic suspension and built-in seat belt. Passenger seat with mechanical suspension with seat belts. Coloured athermic windows. Upon request: Car radio Blue Tooth, RDS, CD, MP3; Compressed air quick coupling for cab cleaning; Trapdoor on roof; Air conditioning; Metalized colour cab ; Non-metalized colour cab; Heated rear view mirrors with electrical adjustment; Cab rear window; External sun shield.
SERVICE DATA
Engine oil sump and filters ............................................ l 28 Gearbox oil: ZF 16S151................................................. l 9,5 Gearbox oil: ZF 16S181OD ........................................... l 11 Gearbox oil: ZF 16S221................................................. l 11 Power steering oil........................................................... l 13 Cap tipping oil ............................................................... l 1 Clutch circuit oil ............................................................. l 0,5 Integral PTO oil ............................................................. l 3 Oil intermediate axle with final reducers ........................ l 27 Rear axle with final red. Oil............................................ l 16 Cooling system water..................................................... l 33 Diesel ............................................................................ l 300
Technical data and general specifications - validity to be checked for the individual countries concerned
ASTRA Veicoli Industriali Via Caorsana, 79 29100 Piacenza (Italy) Tel. ++39-523/5431 Fax ++39-523/59.17.73 www.astraspa.com
DEALER