The document provides an introduction to the CAMC H08 series of heavy-duty trucks produced by Anhui Hualing Automobile Co., Ltd. It discusses the company's advantages in areas such as cab design, power systems, suspension systems, and transmission systems. It also describes the international collaborations involved in developing the trucks and highlights the trucks' compliance with emissions standards. Models of the H08 series for different applications are introduced along with their technical specifications.
The document provides an introduction to the CAMC H08 series of heavy-duty trucks produced by Anhui Hualing Automobile Co., Ltd. It discusses the company's advantages in areas such as cab design, power systems, suspension systems, and transmission systems. It also describes the international collaborations involved in developing the trucks and highlights the trucks' compliance with emissions standards. Models of the H08 series for different applications are introduced along with their technical specifications.
The document provides an introduction to the CAMC H08 series of heavy-duty trucks produced by Anhui Hualing Automobile Co., Ltd. It discusses the company's advantages in areas such as cab design, power systems, suspension systems, and transmission systems. It also describes the international collaborations involved in developing the trucks and highlights the trucks' compliance with emissions standards. Models of the H08 series for different applications are introduced along with their technical specifications.
TEL86-555-8323597 FAX86-555-8323389 SERVICE HOTLINE800-868-8822 http://www.camc.cc E-mail: fr@camc.biz H08 PRODUCTS CATALOGUE Preface CAMC H08 series of heavy-duty truck are new generation of CAMC heavy duty trucks developed by Anhui Hualing Automobile Co., Ltd. By applying the world advanced heavy duty truck key technology, our company has spent 3 years in developing new brand of H08 series and aims to introduce H08 series to the markets in North America and Europe. CAMC H08 series adopt a model of Joint R & D; many international and domestic top companies and research institutes are involved in. Model Design: STILE BERTONE S.p.A. Italy CAE Simulation Analysis and Optimization Design: State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body (Hunan University) Automotive Interior and Assembly R & D: Rieter Automotive Fimit S.P.A, Italy 1-01 1-02 Cabin and Parts Assembly Introduction Company advantages ................................................................................................ 1 Company advantages ................................................................................................ 3 H08 Models Introduction ............................................................................. 3 Cab aerodynamic introduction ................................................................................... 5 Cab structure and material introduction ..................................................................... 7 Advanced body design .............................................................................................. 9 Electrical appliance on vehicle ................................................................................ 11 Other parts ............................................................................................................... 13 special axle ................................................................................................ 14 special suspension .................................................................................... 15 special engine ........................................................................................... 17 Clutch and Transmission .......................................................................................... 19 Steering System ....................................................................................................... 20 Braking System ........................................................................................................ 21 Other parts ............................................................................................................... 22 H08 Models Introduction H08 Cargo Truck and Tractor Introduction ................................................ 23 H08 Dumper and Mixer Introduction ......................................................... 25 H08 Bulk Cement Truck and Bulk Powder Goods Tanker Introduction..... 27 H08 Pumper and Oil Tanker Introduction .................................................. 29 H08 Special Purpose Vehicle .................................................................... 31 H08 New Model ......................................................................................... 33 H08 Model Technical Parameters ............................................................. 36 P r o d u c t s
I n t r o d u c e d
Company advantages Product Advantage Cabin: European design, smart and comfortable, full-steel structure, High Security, low DC drag coefficient; Power system: world advanced power matched technology, powerful drive, energy saved and low noise, environmental protection and high efficiency; Suspension system: perfect combination of each mechanism, high bearing and damping capacity which can reduce tyre wear and fuel consumption and decrease operational costs; Transmission system: high transmission efficiency, big torque and strong climbing capacity; Axle system: double reduction axle, high bearing capacity and transmission efficiency; Steering system: imported with original packaging, easy to operate, safe and reliable; Braking system: high security and braking efficiency; Electrical system: central control module technology, strong load capacity and high reliability, easy maintenance; CAMC has a full range of models which will be widely used and meet operating requirements of different industries and national key projects and special operating environment; CAMC spread all over the world and 1/3 of output have been exported to Africa, Europe, Southeast Asia, Middle East and other countries and areas. Development and Innovation Ability CAMC has provincial technical center. It has domestic first-class research and development, test conditions of vehicles and parts. Based on the technology of Mitsubishi heavy-duty truck production and development, CAMC technical center has finished the self-innovation of middle and heavy- duty series products including wide-body, high roof with two sleepers, narrow-body, low roof, multispindle with different wheelbase which can satisfy the needs of different customers and markets. 0 1 - 0 2 Glorious Achievement Anhui Hualing Automobile Co., Ltd. is a state high-and-new-tech enterprise with strong technological strengths. It has developed heavy- duty trucks with internationally advanced level. The whole truck is the intellectual property right of the company and has gained quite a number of technological patents. With high quality and stable performance, it has gained the ISO9001 International Authentication and 3C Criteria Authentication. The exhaust level of the truck has met the standards of EU and EU . All these contribute to its popularity both at home and abroad. The company became one of the 60 enterprises that were awarded as China made, the most promising enterprises which self developed brand in China's manufacturing industry by relevant state authorities in Nov., 2005. Internationalized Cooperation Through new technical import and digestion of Japan Mitsubishi Fuso Automobiles, CAMC will build world-class heavy-duty truck brand in China with strengthening the cooperation with international famous enterprises actively, such as, American Cummins, Caterpillar and ZF. Going Global CAMC has made great efforts in studying overseas heavy-duty truck markets, designing and producing products oriented towards overseas customers. These efforts result in stable and reliable high-tech trucks which offer customers both safety and comfort. CAMC provides overseas users with perfect after-sale service, thus its products are very popular among overseas customers and have been sold to over 20 countries and regions including North Africa, Middle East, Middle Asia, East Europe and South-East Asia. P r o d u c t s
I n t r o d u c e d
Company advantages 0 3 - 0 4 Parts Advantage CAMC key parts: cabin, axles, frame, suspension system have been keeping in heavy technology leading level. They have proprietary intellectual property rights. Supporting System By the digestion and absorption of Mitsubishi technology, plus continuous innovation, under the direct participation and approval of experts, through the hard process of localization, parts matching system has a certain scale. In 2004, CAMC, as a dark horse, stand out. Relying on the advanced technology, reliable quality and perfect configuration, elegant appearance, it defines the new standards for China heavy-duty truck and lays a solid foundation for creating world heavy- duty truck brand. 1.preparing workshop Large fully computerized plasma cutting machine and fully automatic shear machines. 2.punching workshop There is the largest automation punching machine of 5000 tons in domestic assuring a perfect molding frame. 3.wielding workshop There is the largest wielding workshop with fully automatic robots assuring wielding quality 4.painting workshop Fully closed, dustless workshop,fully automatic triple painting protection system, antiseptic property of vehicles is in a leading position in China. 5.painting workshop It has advanced processing facilities consisting of pre- assembly and general assembly. There are two pipelining with the production capacity of 30000 vehicles per year. 6.inspection workshop There i s advanced i nspecti on equi pment wi th AUDIT inspection standard which gives 100% detection for finished vehicles assuring good performance of vehicle. Go o d ma n u f a c t u r i n g c a p a c i t y a n d q u a l i t y assurance ability CAMC has large domestic first-class production line of preparing, punching, wielding, painting general assembly and inspection. Heavy-duty Truck, international level Definition of new criteria for heavy-duty truck P r o d u c t s
I n t r o d u c e d
H08 Models Introduction All have right-hand drive vehicle models Engineering truck and tractor models Flat roof Flat roof with dome High roof High roof with dome Single row 304 1550.0 2420.0 20850 32220 1550.0 2420.0 27923 39290.469 1550.0 2420.0 24050 35410 1550.0 2630.0 27920 39300 1550.0 2109.0 2263.0 20940 32300 492 20850 24960 20850 24960 20850 24960 20850 24960 20850 24960 0 7 - 0 8 P r o d u c t s
I n t r o d u c e d
Cab aerodynamic introduction Air Dynamics Streamline model design, reducing the wind resistance and the fuel consumption of the vehicle, saving the cost, our cab adopting European style, according with the principle of air dynamics, modulus of the wind resistance is 0.67 which is lower than domestic cab of the same type, saving the fuel obviously. European advanced style inner decorations upgrade entirely Cab air spring suspension system, the safety air chamber for drivers Telescopic steering pipe column, air chamber floating seat Pre-closing safety belt, luxurious sleeper Clearstory, automatic air condition GPS guiding system, driving record instrument Automatic shifting device etc, safety and comfort are the same as limousine 0 9 - 0 1 0 P r o d u c t s
I n t r o d u c e d
Cab structure and material introduction The material of the steering wheel is dainty. The model is novel and handle is comfortable. The steering wheel can be adjusted from front to back and up to down. It is suitable for different people to drive. There are top grade and low-end seats for choosing; seat can be adjusted front and back; the position of cushion and obliquity can be changed. There is air cell in the backrest and it can ease the drivers tiredness markedly; the angle of armrest can be changed until take back according to the demand of driver; safety belt and seat are set into whole and this has increased the safety factor and guarantees the drivers safety. Mechanized seat: it adopts oil pressure and mechanism spring to absorb shock and the height of seat can be adjusted according to the drivers demand. Air suspend seat: it adopts oil pressure shock absorber system and balanceable point can be adjusted automatically according to the body weight and the movement is flexible and comfortable. The upper sleeper of high roof cabin adopts the overturn structure in order to add the lower sleeper room. The sleeper system which is with high quality fabric and comfortable brings the feeling of reliability to people. The two sides of sleeper have the sleeper light and cap catch. There are some human facilities like defended net and shade in front of sleeper and this brings the drivers and passengers the feeling of warmth and comfort just like at home. Steeri ng wheel Seats Sleeper 1 1 - 1 2 P r o d u c t s
I n t r o d u c e d
Genuine CAD&CAE optimize design 1. Three-dimensional and digitized design (all spare parts have Three-dimensional mathematic model) 2. Finite element simulation analysis and optimize design.(intensity analysis, stiffness analysis, mode anal ysi s, front col l i si on si mul ati on experi ment, side collision simulation experiment, rear collision simulation experiment, press experiment of the cab roof, optimizing and improving design) Collision experiment of the cab Roof pressing experiment of the cab Advanced body design Cab inner space It adopts European popular cage skeleton and high strength steel skinning structure. As for body strength, stiffness and crashworthiness, it is considerably better than the traditional structure of domestic and Japanese heavy-duty trucks. There is more spacious space and more comfortable in cab. bottom plate front wall rear wall head cover door cab exploded view body 1 3 - 1 4 P r o d u c t s
I n t r o d u c e d
medium control module rear control module medium control module RET controller instrument desk controller engine engine ECU left front combination light right front combination light ABS controller front control module door control module Electrical appliance on vehicle Some models of CAMC H08 style use can-bus general assembly line technology. All driving data will be sent to the general assembly line through the sensors which locate all over in the vehicle body. Then CAN system control module to control the carried-out work of all electric devices. The application of the CAN-BUS general assembly line can reduce a large number of the wiring harness of the vehicle and reduce the interfaces between wire harness and controller so it prevents from the interference and abrasion for too many wire harness. It can reduce the rate of failure of the vehicle electrical system: it also can have the immediate communication with the ABS system and ECU of the engine, so it improves the electric capability of the vehicle. With the help of the CAN-BUS technology, the anti-steal capability and safety have a great improvement. CAN general assembly line system of CAMC consists of general assembly line instrument, cab control module, emergency system module, chassis control module, taillight control module, remote control key and the antenna of the remote controller. it can realize the following human design function: Auto-looking for function: through the antenna and the remote controller, vehicle can be discovered within 1000 meters in a short time after parking.(the loudspeaker rings , the left and right turning light flicker, the side door lock opens); Auto-lock Function: Through antenna and remote controller, auto-lock and auto-rising of glass can be achieved within 1000 meters after parking. The headlight function: within 30 seconds, the front dipped headlight will last lighting for 30 seconds and it can supply illumination for the passengers. 7 inch multimedia display system Multimedia display system locates in the focusing English voice presentation navigation which is in the centre of the centre controlling platform. The multimedia navigation system which includes DVD, mp3, mp4, hands-free phone and reversing radar makes the customers enjoy the fun of the driving fully. Working condition: -40 75 Can general assembly line module distribution sketch map of vehicle Control module combination meter Independent MP3 audio system Electric and automatic A/C system 1. CAMC truck equipped with the functions of ABS (anti-brake system) and ASR (anti-slip regulation), which increase the control to vehicle and reduce the appearance of floated slip, and which curtail braking length effectively, decrease tire wear and improve the safety and stability of entire truck.. 2. CAMC truck has functions of glass remote control ,realizing the remote control unlocking and locking within 100 meters, glazing lifting and falling and make vehicle owner where it is Combination instrument is a kind of adopting integrated line board, single-chip computer programmable control, liquid crystal display screen showing mileage, time and the information of truck body and engine, alarm indicator of entire vehicle and the background adopting LED illumination, and equipped with new type instrument fitted sound alarm system. The instrument also adopts CAN (Control Area Network) communication technology to make engine tachometer, speedometer, water temperature indicator, air pressure gauge, fuel gauge and some alarm indicator work to show the real time information of operating state and fault of engine and vehicle body control system. The instrument offers user an intuitionistic terrace to learn about entire truck state and troubleshoot problem. Working condition: -40----- 75 Main driving safety air chamber Optional Optional Electromotion air conditioner controlling system Optional Optional Programmable display shade Optional Optional ASR,ABS braking Optional Optional Idle stability cruise control nation 3 Digital combination meter Running grapher Optional Optional Qalvanothermy defrost electrically controller outside rearview mirror Optional Optional Follow me home function Optional Optional Starter automatical protection Electrically controller headlight height adjustment Door and window can be closed and opened by the remote control in long-distance Optional Optional Function of humanism reminging saftey belt untied Brightness adjustable display instrument CAN system Optional Optional HID headlamp Optional Optional Centre control mirror,electrically controller glass rising and fall Inside and outside temperature display GPS navigation system Optional Optional Multi-functional remote control key Optional 12V spare electrical sourec interface Optional Optional Double steering illumination function Automatical air conditional control system Optional Optional Radio system Standard specification Without 1 5 - 1 6 Auto-diagnose system: if the CAN general assembly line system inspects that there are some electric pieces abnormal or some circuitries have the circumstances of short circuitry and open circuitry, the huge LCD screen of the instrument will show the failure in the form of letter. Special safety design just for CAMC: If the CAN system fails in the unforeseen circumstances, the related lash-up Control Module will provide the basic operating condition of vehicle, which guarantees the lowest safe condition of both driver and vehicle. P r o d u c t s
I n t r o d u c e d
Single-reduction axle CAMC CND1/E1series single-reduction driving axle is the punching and welding axle case. The reduction final drive transfers the torque by a pair of master bevel gear. It has the cheap structure, high effective transmission, small volume, light weight advantages. It has the differential and lock device. The driving power is strong. The axle has a high loading capacity. Its braking capability is perfect, and can be equipped the ABS system. the rating axis loading13000Kg the largest output torque40000Nm the brake structure model/specification400200 final differential ratio6.333 5.833 5.2864.875 4.44. the lubricate system adopts the pump absorb splash lubricating, the lubricant is 85w/90(80w/90) weighty loading hyperbola gear oil Dual-reduction axle The advanced heavy-duty hub redactor driving axle is designed and developed in order to adapt to the big tonnage heavy-duty truck. It satisfies the demand of the middle and top grade heavy-duty trucks. Its advantages are high loading capacity, high anti-tiredness intension, and good braking capability. The intermediate and rear axle have equipped the new model differential lock and also can be equipped the ABS system. The small volume of the main reduction makes the clearance from the bottom of the main reduction to the ground high so the passing capability of vehicle is good. rating axis loading: 13000Kg/16000Kg biggest input speed: 3500 rpm/min biggest input torque: 55000Nm ratio: 5.26 5.92 6.73 brake form and dimension: cam air pressure brake 410X140 braking torque: 29810Nm axle weight: (without lubricant and tire) near 860kg The inject quantity of lubricant: rear axle final reduction 12 liter intermediate axle final reduction 4 liter, each hub 3.5 liter specification of lubricant: gear oil SAE90 or domestic burthen 90# gear oil (GL-5) 80W/90 gear oil CAMC CN series reduction driving axle has foundry and enlarge-pipe two kind structure case and can apply for different special vehicle model. The structure of the leaf spring location is disassembly door-type and ensures the location of the steel leaf spring is reliable; the gear lubricating form is pump absorb splash lubricating. Ratio gear series Tooth number of the driving conic gear Z1 21 18 17 Inner liner number ZO 56 56 56 Tooth number of the driven conic gear Z2 28 27 29 I=(1+Z0/Z)* Z2/Z1 5.26 5.92 6.73 Sun gear number Z 19 19 19 Other parts special axle Air Condition System Air Condition System applies the up and down all-in-one pop European style, and its refrigerating output can reach to 4500 kilogramme calorie which is able to meet the needs of demanding users and to satisfy requirements of normal operations under harsh working environment. Sun Shield PMMA luxury sun shield is well integrated with the cabin and its LED light box is convenient to make advertisements for truck users. Combination Viewing Mirror Combination Viewing Mirror is very clear and realistic, which can provide users with all-round non-blind area. 1 7 - 1 8 P r o d u c t s
I n t r o d u c e d
Air suspension Adjustable loading capacity Elastic coefficient changes with the loading Natural frequency hardly changes when loading changes Natural frequency is a little low More comfortable and safer More steady when driving the vehicle Extend the using life of tire and braking slice The height of the vehicle doesnt change when loading changes Reduce the repairing cost of electricity, air conditioner, exhausted system, axle and chassis Reduce the concussion to the road, protect the road. special suspension Front suspension The disposal type of the front suspension is half ellipse alloy steel flake with hydraulic bidirectional Telescopic canister-type shock absorber and vertical disposal of the leaf spring. Lengthening function fulcrum distance is 1800mm. through which Intension, length, width, thickness, arc height, number of the steel plate spring and the cylinder diameter and the journey of the shock absorber are confirmed. Combined with the shock absorber of the vehicle body, it makes the high-point of the vibration acceleration of our vehicle body is not more than 0.3~0.4g. It reduces the vibration frequency of our vehicle body greatly. Choosing the canister-type shock absorber with the bidirectional damp reduces the vibration of the vehicle effectively again. This design makes the drivers feel comfortable during the driving and no tired sense after a long time driving. Rear suspension 6X48X4, the obvious change of the structure of the new type separate version balance suspension bracket, it was changed from the traditional whole balance shaft to the two right and left balance shaft assemblies which are independent, because the landscape orientation transferring parts, for example:, the guided board, leaf spring bracket were taken off, the upper traction bar was changed from the grade stab to V type traction bar, the both terminals of the V type traction bar are fixed to the seat of the V type traction bar on the truck frame. Advantages of equalizing suspension capability 1. Lower barycenter, better stability. The new suspension reduces the height of the vehicles barycenter when vehicle loads full so that makes the safety of driving improved; it widens the leaf spring distance so makes the landscape orientation stability of vehicle higher. 2. The limiting distance has been improved, and the driving axle jumping distance increased greatly(under full-load, the limiting distance is the traditional suspensions double).for the new type suspension eliminates the interference point of the traditional suspension between trunnion shaft and propeller shaft, down distance rod and bracket, so the design enlarges the limiting distance of the driving axle and makes the driving axle have still have bigger jumping room even loads much. That the jumping room of the driving axle increases means axle can load balanceable when meets bigger obstacle, and the circumstance that one axle has no loading while the other one overloads will not happen easily. 3. The stability of the triangle makes the V-pole has good landscape orientation locating function, so the landscape orientation fleeing distance of the driving axle reduces much compared with the traditional suspension. It doesnt only solves the problems that the thru shaft gear abrades and oil leaks which happen frequently in the traditional suspension, but also reduces the tire abrasion of the driving axle and improves the vehicle landscape orientation stability. 4. The special designed leaf spring ballast, leaf spring and U-bolt makes the phenomenon that leaf spring comes loose and breaks and the leaf spring center bolt rupture reduces greatly. 5. For without the function of landscape orientation locating function, the reliability of trunnion shaft assembly improves much compares with the traditional equalizing suspension assembly. The rate that seal invalidations, gear abnormal abrasion or invalidation, and the trunnion shaft center bolt rupture will fall greatly. 1 9 - 2 0 P r o d u c t s
I n t r o d u c e d
special engine A. HINO P11C series engine B. CUMMINS ISME series engine C. American PACCAR engine D. Mitsubishi 6M70 engine A. HINO P11C series engine P11C-UH325HP P11C-UH350HP P11C-UR380HP B. CUMMINS ISME series engine ISMe345 30345HP ISMe385 30385HP ISMe420 30420HP C. American PACCAR engine 410hp460hp D. Mitsubishi 6M70 engine 6M70380HP B10 life is longer than 1000,000km. The advanced inlet and exhaust system and fuel characteristicsan extremely low fuel consumption in broad range of power and speed Diesel high-power output and large torque backup can make the vehicle work easily under different conditions. Low emission, low pollution, low noise are all in accordance with emission standard of national . Power resource High reliability Economical efficiency Super power Environmental protection 2 1 - 2 2 A C B D P r o d u c t s
I n t r o d u c e d
Clutch and Transmission Steering System Imported steering gear 1. Steering gear imported from Germany 2. Operating easily, turning agility, driving steady, reversible degree appropriate 3. Steering tubes all adopt stainless steel seaml ess tubes. They have good heat elimination character and avoid that the steering hydraulic oil is too hot. Two steering front axle The particular two front axle steering mechanism is more suitable for overloading transportation. The orientation parameter of two front axles is reasonable and reduces the abnormal abrasion of the tire of the second axle. The front axle is equipped the landscape orientation stabilizer and it improves the driving stability of vehicle. The wheel base of the two front axles is 1940mm.the distance is short, and the two axles hold the weight equally. The mechanism is simple and reliable. The two front axles braking system depends on the relay valve to operate. Braking is rapid and reliable and there is no braking lag phenomenon. Clutch 1. The clutch has many advantages like big torque capacity, steady torque capacity, high reliability, strong loading power.FD430L series pull-type clutch is suitable for heavy-duty trucks whose biggest weight is 30 tons or more. And this series clutch can match the engines from 320HP to 430HP. 2. SACHS clutch is 430 pull-type clutch matched with ZF transmission .It has good quality, high reliability and long using life, and it can match the engines from 320HP-430HP. SACHS from Germany Transmission 1. ZF16S1650 transmission is 16 gear transmission made by ZF transmission technology (Hangzhou) LTD. It is very easy to operate. The synchronization ensures the engaging teeth of all gears can move with the same orientation and speed before they engage together so shift gear is rapid and reliable. 2. Bipod doesnt have to leave the clutch when upshift. 3. It is not necessary to step on the accelerator fiercely when downshift, even in the situation of downgrade and complex traffic. The surface of synchronized ring is plated by molybdenum. 4. Shift between high, low gear and half gear is realized by air-operated control. 5. High performance and big input torque is profited from the optimized gear processing craftwork. Mitsubishi FAST 12JS165 ZF16S1950 9T.7.5T 2 3 - 2 4 P r o d u c t s
I n t r o d u c e d
Braking System Other parts 1. Keep the maneuverability of the vehicle direction when emergent braking happens. 2. Shorten and optimize the braking distance, on the regular surface of the road, maintaining the best utilization rate of adhesion coefficient of the roadthe best braking distance. 3. Reducing the traffic accident. 4. Alleviating the mental burden of the drivers. 5. Reducing the tire wear and upkeep costs. 6. Conventional braking system still work when ABS failed. 7. ASR system keeps the driving force of the vehicle. 8. Ensuring the stability of the driving when the vehicles start-up, speed up and swerve on the wet road. 9. Warning the damp and slip of the road by the caution light. 10.Assembling EVB exhaust braking system, improving the braking efficiency, fuel prudent and pro-environment. 11.Adopting new-style quick connector, connecting quickly, easy to assemble and disassemble, good gas tightness. A. Aluminium alloy oil tank B. Quadrate muffle C. Tractor walking board D. Bat t er y cel l and ai r reservoir E. Monolithic fender F. Convenient foot plate A C E B D F 2 5 - 2 6 P r o d u c t s
I n t r o d u c e d
H08 Cargo Truck and Tractor Introduction Cargo truck technical parameters Tractor technical parameters GVW: 1619222531T Number of axles: two axles, three axles, four axles Type of cabin: flat roof, high roof, wide body and narrow body Engine power:180~460PSCUMMINS 345-420HINO 350-380WEICHAI 240-460WUXI DIESEL ENGINE 180-320DONGFENG CUMMINS 185-375 and so on) GEARBOX: 6-16FASTZFMitsubishi STEERING SYSTEM: ZJ110 ZF8098 FRAME: 976 double reduce sectionhigh strength, double and single reduction axle, air suspension Cargo body: corrugated plate type, net type, stake type No. Cabin Engine Power (PS) Length (mm) Width (mm) Height (mm) Length of cargo body (mm) Width of cargo body (mm) Height of cargo body (mm) Number of axles Wheelbase (mm) Tyre GVW (kg) Payload (kg) Kerbmass (kg) Maximum speed (km/h) 1 Flat roof, high roof, long type, short type, dome are optional. WP10.290N 290 8870 2496 3222 6200 2300 600 2 4800 11.00/ 12.00 16000 7805 8000 85 2 WP10.336N 336 10710 2496 3222 7900 2340 800 3 4710+1350 25000 15290 9515 85 3 WP10.375N 375 11170 2496 3540 8500 2300 800 3 5220+1350 25000 13955 10850 85 4 ISLE290 30 290 12270 2496 3222 9600 2300 800 3 5850+ 1350 25000 12955 11850 90 5 ISME345 30 345 10970 2496 3540 8300 2300 800 3 1940+4710 16100 7900 8005 90 6 P11C-UH 325 11300 2496 3222 9600 2300 800 3 1940+5220 21000 11005 9800 88 7 P11C-UJ 350 12270 2496 3540 9600 2300 800 4 1940+3910+1350 31000 17995 12810 88 8 WD615.93 290 12270 2496 3222 9600 2300 800 4 1940+4515+1350 31000 17995 12810 88 Note: cabin, engine, wheelbase, tyre, gearbox and driving axle have options. The price of CAMC tractor with small horsepower is similar to that of competitors, but the specifications are higher than them. It is especially suitable for individual customers and logistics of medium and long distance. Its horsepower is from 260PS and 345PS. CAMC tractor with big horsepower is suitable for mineral transport, bulk cargo transport and the long-distance transportation of large goods and equipment. Its horsepower is from 350PS and 420PS. Its strong power, comfortable cab and low fuel consumption bring higher reliability and economy to users, greatly enhancing the efficiency of transportation. No. Model Engine Horsepower (ps) LengthWidthHeight (mm) Number of axles Wheelbase (mm) Tyre GVW (kg) Payload (kg) Kerbmass (kg) Maximumspeed (km/h) 1 HN4181P33C4M3 SC9DK290Q3 290 5790x2495x3100 2 3400 11.00/12.00 1800 10945 6860 90 WD615.93 390 5790x2495x3600 WP10.300 300 2 HN4180P35C4M3 WD615.33(Hangzhou) 340 5590x2495x3047 2 3400/3200 11.00/12.00 1800 10655 7150 90 WP10.290 290 WD615.93E 290 WD615.95E 336 5590x2495x3560 ISLe290 30 290 ISLe310 30 310 3 HN4181P35C4M3 C9DI 350 5790x2495x3100 2 3400 11.00/12.00 1800 10945 6860 90 ISLe340 30 340 WD615.95 336 P11C-UH 325 5790x2495x3600 SC9DF340Q3 340 4 HN4180P38C4M3 PIIC-UJ 350 5790x2495x2965 2 3400 11.00/12.00 1800 11005 6800 90 6M70 380 5790x2495x3560 Note: cabin, engine, wheelbase, tyre, gearbox and driving axle have options. 2 7 - 2 8 P r o d u c t s
I n t r o d u c e d
H08 Dumper and Mixer Introduction Dumper technical parameters Mixer technical parameters No. Vehicle model Chassis model Engine Model Engine Power (KW) GVW (kg) Payload (kg) Overall dimension (mm) Wheelbase (mm) 1 AH5256GJB6 HN3250P35D4M3J WD615.329/WD10.336/ ISLe34030/P11C-UJ/ WD615.95/ISME385 30/ WP10.336N 213/243/250/254/247/283/247 25000 9805 9600x2495x3900 9800x2495x3950 4100+1450 2 AH5256GJB7 HN3250P34C6M3J WD615.334/WP10.290/CA6DL1- 29E3/CA6DL1-32E3/WD615.329/ ISLe290 30/ISLe310 30/ISLe340 30/ WP10.336/WD615.95 247/213/213/239/213/213/228 /250/247/247 25000 11605 8800x2495x3900 3600+1450 3 AH5311GJB4 HN3310P37C3M3J P11C-UJ/WP12.375/6M70/ WP10.375/WD615.338(Hangzhou)/ SC9DF375Q3/ISME385 30 / ISME345 30/ISLe340 30/ISLe375 30/WP10.336/WD615.334/C9DI/ WP10.336N 259/274/279/276/276/275/283 /254/250/275/247/249/261 /247 30995 13900 15000 1075024953990 1043024953860 1940+3370+1450 1940+3370+1450 4 AH5253GJB3 HN3250P35C6M3J P11C-UJ/ISLe340 30/WP12.375/ ISME385 30/P11C-UR/6M70/ WD615.334/WP10.336/P11C-UH/ SC9DF340Q3/ISME385 30/ISME345 30/WD615.95E/WP10.336N 259/250/274/283/275/279/247 /247/240/251/283/254/247 /247 25000 11805 900024953800 870024953780 3600+1450 3600+1450 3800+1450 CAMC dumper has developed to series products. Engine power: 260PS-385PS Length of deck: 4.85.25.45.65.86.27.27.58.18.2unit: m In order to lower vehicle height of center of gravity and increase the stability and suitability of road, 08 CAMC heavy-duty truck series all adopt the variable section frame with the structure of front 976mm and rear 852mm and reduce the weight of entire vehicle for saving fuel consumption and increasing payload. Many options for engine with different horsepower, transmission, driving axle can satisfy the needs of various working conditions and usages, widely used for the short-distance transportation of coal, iron ore, sand, cement clinker etc. No. Cabin Engine Power (PS) Length (mm) Width (mm) Height (mm) Length of cargo body (mm) Width of cargo body (mm) Height of cargo body (mm) Number of axles Wheelbase (mm) Tyre GVW (kg) Payload (kg) Kerbmass (kg) Maximum speed (km/h) 1 Flat roof, high roof, long type, short type, dome are optional. SC9DF290Q3 290 7770 2496 3450 5000/5200 2300 1200 3 3200+1350 11.00/ 12.00 25000 13055 11750 78 2 WP10.300N 300 8170 2496 3450 5400 2300 1250 3 3400+1350 25000 12750 12055 78 3 ISLE310 30 310 8370 2496 3450 5600 2300 1100 3 3600+1450 25000 12400 12405 78 4 P11C-UH 325 9440 2496 3360 6200 2300 1000 3 4100+1350 23220 11555 11470 78 5 WP10.336N 336 10370 2496 3360 7200 2300 1100 4 1940+3280+1450 31000 15455 15350 78 6 ISME350 30 350 10970 2496 3360 7800 2300 900 4 1940+3910+1450 26200 12995 13010 78 7 P11C-UR 380 11370 2496 3360 8200 2300 850 4 1940+4210+1450 27000 13355 13450 78 8 ISME385 30 385 12270 2496 3360 9600 2300 750 4 1940+4515+1450 26300 12995 13110 78 Note: cabin, engine, wheelbase, tyre, gearbox and driving axle have options. 2 9 - 3 0 P r o d u c t s