Improve Picture Quality with Home Theater

Power Conditioners by Panamax

MAX 5100-EX ®
THE SOURCE OF PURE SOUND AND PICTURE™

TOP BENEFITS FEATURES

1 Improves Picture and Sound Quality LEVEL 3 Power Cleaning and 3 Isolated Outlet Banks
LEVEL 3 Power Cleaning and Filtration eliminates common symp- Filtration
toms of contaminated power (including loss of detail, pops, hiss- Coaxial Signal Line Protection:
es, hums and visual artifacts) and allows your A/V equipment to Protect or Disconnect™ Automatic 1 HD Sat and 1 HD CATV
perform up to its full capability. Voltage Monitoring Circuitry (AVM™)
Auto-resetting Telephone (pay-
LED Voltmeter and Power Status per-view) and LAN Line Protection
2 Monitors Incoming Line Voltage and Provides a Visual
Indicator Lights
Indication of Power Level
DC Trigger Input
Panamax’s patent pending AVM™ circuitry continuously moni- 11 Outlets: 4 Always On,
tors the incoming power as displayed on the LED voltmeter. The 4 Switched, 2 High Current, Optional Rack Mounting Brackets
first LED will flash slowly to indicate an under voltage condition 1 Convenience (front)
and the last LED will flash to indicate an over voltage condition. Optional Silver Bezel
Power to the connected equipment is automatically turned off if
either of these conditions is detected. When voltage returns to a
safe level, power to the equipment is automatically reconnected.

3 Reduces Cross-Contamination Between Components

The M5100-EX is designed to provide noise isolation between 3
isolated outlet banks including 2 high current outlets so that any
noise created by an A/V component can not contaminate the
power going to equipment plugged into another outlet bank.

The Power Specialists Since 1975

www.panamax.com ®

L548 REV A 5/05

MAX® 5100-EX REAR PANEL FEATURES

Circuit Breaker Ground Lug Outlet Bank 2 Outlet Bank 1 Satellite TV Coax Jacks Cable TV Coax Jacks
Automatically opens Provides a common Four switched outlets controlled by the front panel Power Four always on outlets. Power will only be turned off Bidirectional protection circuit opti- Bidirectional protection circuit opti-
when the current load grounding point for Button or the DC Trigger input. Bank 2 will turn on imme- under a fault condition. (See specifications for over- mized for satellite TV signal lines. mized for cable TV, off-air antennas
is greater than 15 equipment with sep- diately and turn off after 10 seconds. EMI/RFI noise filtra- voltage and under-voltage thresholds) Power is cleaned and cable modem signal lines.
Amps. arate ground leads. tion is provided by a two-stage balanced Pi filter which by a two-stage balanced Pi filter which also provides
also provides noise isolation from Outlet Banks 1 and 3. noise isolation from Outlet Banks 2 and 3.

Main Power Outlet Bank 3 Voltage Sense Trigger Input LAN Jacks Phone Jacks
Must be plugged Two switched, high current outlets controlled by the front panel Power Button or the DC 3.5mm (1/8”) Mini-Plug jack. Connect to Protection cir- Protection circuits for
into a properly Trigger input. Bank 3 has a 5 second turn on delay and turns off immediately. The High a remote trigger device that uses a DC cuits for 10/100 standard telephone
wired & ground- Current outlet provides power from a low impedance noise filtration circuit that does not output to trigger a startup/shutdown baseT Ethernet or pay-per-view lines.
ed 3-wire outlet limit the current to your equipment. Its output is noise isolated from all other outlet banks. sequence. This bypasses the front panel lines. Phone circuit is auto-
power switch. resetting.

MAX® 5100-EX SPECIFICATIONS

AC Power Telephone Circuit (pay-per-view)
Line Voltage:____________________________________________________120V, 60Hz Fuseless/Auto-resetting:_________________________________________________Yes
Total Current Capacity:__________________________________________________15 A Clamping Level:______________________________________________________260V
UL1449 Suppression Rating:____________________________________________330V Capacitance:__________________________________________________30pf (approx.)
Protection Modes:______________________________________________L-N, L-G, N-G Suppression Modes:____________________________________Metallic & Longitudinal
Initial Clamping Level:_________________________________________________200V Jacks:_____________________________________________________________RJ-11
Energy Dissipation:______________________________________________1815 Joules Wires Protected:___________________________________________2-Wire, Pins 4 & 5
Peak Impulse Current:___________________________________________73,000 Amps DSL Compatible:_______________________________________________________Yes
Catastrophic Surge Circuit:_______________________________________________Yes
Thermal Fusing:_______________________________________________________Yes HD Satellite TV Circuit
Over-voltage shutoff:__________________________________________142 VAC ±5 VAC Bidirectional:__________________________________________________________Yes
Under-voltage shutoff:________________________________________90 VAC ± 2 VAC Shielded:_____________________________________________________________Yes
EMI/RFI Noise Filtration Clamping Level:_______________________________________________________27V
Banks 1 & 2:________________________________________ 80 db, 100 KHz – 2 MHz Attenuation:______________________________________< 1db from 950MHz-2.05GHz
Bank 3, High Current Outlets:____________________________60 db, 100 KHz – 2 MHz < 2.4db @ 2.2GHz
Common Mode (all banks)______________________________60 db, 100 KHz - 2 MHz Connections:__________________________________________Female “F”, Gold Plated

DC Trigger Input HD Cable TV Circuit

Jacks:_______________________________________________3.5mm (1/8”) mini-plug Bidirectional:__________________________________________________________Yes
Voltage and Polarity:___________________________________3 - 24V DC, bidirectional Shielded:_____________________________________________________________Yes
Current Requirement:_________________________________4.6 mA @3V, 58 mA @24V Clamping Level:_______________________________________________________1.4V
Attenuation:________________________________________< 1db from 5MHz - 950MHz
LAN Circuit Connections:__________________________________________Female “F”, Gold Plated
Clamping Level:____________________________________________________8V ± 2V Pay-Per-View Compatible________________________________________________Yes
Jacks:_____________________________________________________________RJ-45
Wires Protected:_______________________________________4-Wires, Pins 1, 2, 3 & 6

Specifications subject to change due to product upgrades and improvements.

UPC’s, QUANTITIES, WEIGHTS & MEASUREMENTS FOR ORDERING & SHIPPING

MODEL M5100-EX UNIT CARTON MASTER CARTON
Dimensions Weight Dimensions Weight UPC Qty Dimensions Weight UPC

17" x 12.75" x 3.5" 14 lbs 23.75" x 19.25" x 9.5" 17.5 Lbs 0 50616 00785 6 1 Same as 17.5 Lbs 5 00 50616 00785 1
4.1" H with feet Individual Carton

OPTIONAL SILVER BEZEL

SILVER BEZEL PRODUCT UNIT CARTON MASTER CARTON
Model # Dimensions Weight Dimensions Weight UPC Qty Dimensions Weight UPC
BEZ5100-EXS 17" W x 0.625" D x 3.5" H 14.5 Oz 18" x 4" x 1" 18.0 Oz 0 50616 00791 7 N/A N/A N/A N/A

The Power Specialists Since 1975

® 1690 Corporate Circle, Petaluma, CA 94954 • 800-472-5555 or 707-283-5900 • Fax - 707-283-5901 • www.panamax.com
© 2005 Panamax. Panamax, MAX and the Panamax logo are registered US trademarks of Panamax. Protect or Disconnect and AVM are trademarks of Panamax. SIDACtor is a registered US trademark of Teccor Electronics, Inc.