Petrogas Filtration Catalogue

where nature and technology meet
PETROGAS GAS-SYSTEMS BV
www.petrogas.nl
Solutions for filtration applications
F I L T R A T I O N
F I L T R A T I O N
An introduction
Baffle plate coalescer seperator skid - designed
and manufactured by Petrogas Gas-Systems BV
Petrogas upholds a stringent QC policy ensuring that every filter cartridge
delivers a performance according to its design. Besides rigorously upholding
our quality we are also constantly trying to improve upon it. Through
research, desi gn and f requent testi ng we are constantly sti mulati ng
product development and improvement.
Clean and aerosol free gas is critical for industrial equipment
to operate effectively and reliably. Petrogas filtration is dedicated
to designing and manufacturing dust filter and coalescer cartridges
that provide high efficiency removal of solids and liquids from
contaminated gases, ultimately protecting downstream equipment
and reducing maintenance costs.
Petrogas f i ltrati on i s a part of
Petrogas Gas-Systems, which is a
renowned Du tc h engi neeri ng
c om pany t hat d evel ops ,
manufactures and supplies turn-
key gas installations worldwide.
Our f i lter cartri dges are hence
mainly designed for application
i n f i lter-seperators to remove
parti c u lates f rom the proc ess
stream s of ai r, hy d rogen and
natural gas.
Petrogas Filter Separator
Petrogas Dust Filter
Curing heat equipment after pleating phase Blade type pleating equipment to bond multi layered media
We use only high quality grade media materials from a prominent supplier
that is a global leader in creating, manufacturing and supplying technically
advanced high efficiency and liquid filtration media.
Our manufacturing is ISO9001 certified and is carried out to the highest
standards using the latest manufacturing technology to ensure a high
quality, consistent product.
High grade engineered
media materials
F I L T R A T I O N
Filter Element Performance Testing Method
Petrogas filtration has conducted elaborate filtration efficiency tests at renowned testing facilities.The
test method and apparatus are in accordance with VDI 3926 standard.
The performance test for separation of solid particles is operated by negative pressure suction in such a
way that a fixed quantity of test dust particles are added constantly through the feeder (Palas BEG-1000)
at air intake. The aerosol enters into the filter and passes through the filter element to achieve filtering.
The solid particles are discharged finally through the ash hopper. A number of sensors are used in the test
to check the actual working performance of the filter element at different filtration velocities. The test
procedure is as shown in Fig. 1. Relevant parameters measured in the test are as below:
The performance test for separation of liquid particles is also operated
by negative pressure suction in such a way that a fixed quantity of gas-
liquid mixture is added constantly through the sprayer at filter inlet. The
aerosol enters into the filter and passes through the coalescence filter
element to achieve filtering. The liquid is discharged finally through the
liquid outlet. A number of sensors are used in the test to check actual
agglomerati on worki ng performance of the fi lter element at di fferent
filtration velocities.
Dust measured: ISO COARSE A.T.D. A4 dust
gas-liquid test apparatus
Fig. 1 Overview Test Device (Gas-Solid)
Test method and laboratory apparatus are in accordance with VDI3926 standard.
Relevant parameters: Test temperature 27
C, relative humidity 44.8 %, particle diameter 0.3~17m

gas-solid test apparatus
F I L T R A T I O N
Filter Element Performance Testing Method
The test for separation of liquid particles is as shown in Fig. 2. Relevant parameters measured in the test
are as below:
Atomized liquid: dioctyl sebacate (DOS) ; Sprayer model: SU11 (Spraying Systems Co.)
Fig. 2 Overview Test Device (Gas-Liquid)
The measuring of aerosol particle size and distribution in the up-stream and
down-stream of the filter is done by an optical particle counter (Palas Welas
3000 Seri es). Thi s parti cle measuri ng system, as shown below i n Fi g. 3,
includes a vacuum pump, sampling nozzle, diluter and computed particle
detection system.
Sampling is made with the own vacuum pump in Welas

Control System and
the sampling flow is 5 Lmin
-1
. A series of sampling nozzles are fabricated
aiming at the common flow range. In order to ensure coaxial and isokinetic
sampling the diameter of the sampling nozzle change with the inlet velocity,
allowing for the particles to be equally collected regardless of their size.
Fig. 3 Particle measurement system
Welas particle measuring control unit
Test method and laboratory apparatus are in accordance with VDI3926 standard.
Relevant parameters: Test temperature 27
C, relative humidity 44.8 %, particle diameter 0.3~17m

F I L T R A T I O N
Low Temperature Dust Filter Cartridges
The P-DS LT series filter cartridge is a composite of pleated cellulose and
polyester fiber and ensures high efficient removal of dust particles in air,
hydrogen, natural gas and other industrial gases.
This filter is recommended for low temperature applications with peak
temperatu res u p to 90
C. The poly ester rei nf orc ement stabi li zes the

cellulose and provides greater moisture resistance. Its pleated structure
maximizes the effective filtration area which assures high flow rate, low
differential pressure and an ultimately longer service life. The filter has
an inner and outer metal mesh for support and protection of the filter
media.
Due to its high effective filtration area and high efficiency media, this
fi lter provi des a hi gh soli d removal effi ci ency whi ch ensures opti mum
protection of downstream equipment.
Product Specifications:
Materials of Construction
Filter Media (4): Resin impregnated high cellulose grade with 20% water repellent polyester
fibers. Inner Core (5): Q235 perforated galvanized steel
Outer Core (3): Q235 perforated galvanized steel
End Caps (1): Q235 Galvanized sheet steel
Gasket (2): Wool felt
Available Dimensions:
Inside / outside diameters [mm]:
170/230; 220/280; 270/330; 350/410
Lengths [mm]: 500, 600, 750
Additional sizes upon request.
Performance Specifications:
Filter efficiency: refer to graph
Flow direction: from outside to inside
Maximum allowable differential pressure: 1.5 bar
Recommended change cartridge differential pressure: 800-1000 mbar
Maximum operating temperature: 70
C ;
short peak temperatures of max. 90
C (max. 20 min.) are acceptable.

Test method and apparatus: according to VDI 3926 testing
standards of filtration media.
c
u
m
u
l
a
t
i
v
e

v
o
l
u
m
e
t
r
i
c

e
f
f
i
c
i
e
n
c
y

o
f

p
a
r
t
i
c
l
e
s

>
D
p
Particle Separation
Particle diameter Dp [m]
F I L T R A T I O N
Medium Temperature Dust Filter Cartridges
The P-DS MT series filter cartridge is a composite of pleated cellulose
and polyester fiber and ensures high efficient removal of dust particles
in air, hydrogen, natural gas and other industrial gases.
This filter is recommended for medium temperature applications with
peak temperatures up to 150
C . The polyester reinforcement stabilizes

the cellulose and provides greater moisture resistance. Its pleated structure
maximizes the effective filtration area which assures high flow rate, low
differential pressure and an ultimately longer service life. The filter has
an inner and outer metal mesh for support and protection of the filter
media.
fi lter provi des a hi gh soli d removal effi ci ency whi ch ensures opti mum
protection of downstream equipment.
Filter Media (4): Resin impregnated high cellulose grade with 20% water repellent polyester
fibers. Inner Core (5): Q235 perforated galvanized steel
End Caps (1): Q235 Galvanized sheet steel
Gasket (2): Wool felt
C ;

Inside / outside diameters [mm]:
170/230; 220/280; 270/330; 350/410
Lengths [mm]: 500, 600, 750
c
u
m
u
l
a
t
i
v
e

v
o
l
u
m
e
t
r
i
c

e
f
f
i
c
i
e
n
c
y

o
f

p
a
r
t
i
c
l
e
s

>
D
p
Particle Separation
F I L T R A T I O N
Ultra High Temperature Dust Filter Cartridges
The P-DS UHT seri es fi lter cartri dge i s a pleated combi nati on of hi gh
temperature resistant felt on a stable support and ensures high efficient
removal of solid particles from hot moist gaseous media.
This filter is recommended for ultra high temperature applications with
peak temperatures up to 260
C. It's pleated struc ture maxi mi zes the

effecti ve fi ltrati on area whi ch assures hi gh flow rate, low di fferenti al
pressure and an ultimately longer service life. The filter has an inner and
outer metal mesh for support and protection of the filter media.
fi lter cartri gde provi des a hi gh soli d removal effi ci ency whi ch ensures
optimum protection of downstream equipment.
Filter Media (4): high temperature resistant felt
Inner Core (5): Q235 perforated galvanized steel
End Caps (1): Q235 galvanized sheet steel
Gasket (2): high temperature resistant felt
Inside / outside diameters [mm]: 170/232
Lengths [mm]: 500, 600, 750
Filter effiency: refer to graph
Maximum allowable differential pressure: 3 bar
Recommended change cartridge differential pressure: 1000 mbar
Continuous operating temperature: 240
C
short peak temperature of max. 260
C (max .30min.) are acceptable

c
u
m
u
l
a
t
i
v
e

v
o
l
u
m
e
t
r
i
c

e
f
f
i
c
i
e
n
c
y

o
f

p
a
r
t
i
c
l
e
s

>
D
p
Particle Separation
F I L T R A T I O N
Liquid Separation Filter Cartridges
Prefilter Media (6): polyester
Coalescing Media (3): densely wrapped layers of glass microfibers
Gaskets (2): wool felt
Inside / outside diameters [mm]: 90/150
Lengths [mm]: 735, 835, 1100
The P-LS LT series is a cost effective liquid coalescer filter cartridge that
removes liquid particles from wet gas with an ultra high efficiency while
simultaneously presenting a very low restriction to gas flow, resulting in
low pressure drop.
temperatures up to 120
C. It's composite structure of wound polyester

and densely wrapped layers of glass microfibers yields maximum efficiency.
A cotton sock f orms the most outer layer of the f i lter to absorb the
coalesced moisture.
filter provides a low saturated pressure drop and a consistent high liquid
removal ef f i ci ency whi ch ensures opti mum protecti on of downstream
equipment.
c
u
m
u
l
a
t
i
v
e

v
o
l
u
m
e
t
r
i
c

e
f
f
i
c
i
e
n
c
y

o
f

p
a
r
t
i
c
l
e
s

>
D
p
Liquid Separation
Filter effiency : refer to graph
Flow direction : inside to outside
Recommended change cartridge differential: 800-1000 mbar
C
short peak temperature of max. 120
C (max .20min ) are acceptable

F I L T R A T I O N
Low Temperature Coalescer Filter Cartridges
Inside / outside diameter [mm]:
90/150; 160/240
Lengths [mm]: 600, 735, 835, 1100
The P-DLS LT seri es i s a cost ef f ecti ve coalescer f i lter that removes
parti c les f rom moi st natu ral gas wi th an u ltra hi gh ef f i c i enc y whi le
simultaneously presenting a very low restriction to the gas flow, resulting
in low pressure drop.
C. It's high performance is two-phased: Pre-filtering

and Coalescing.
Pre-filtering removes dirt particles using a three layered pre-filter that
is composed of resin impregnated pleated cellulose, polyester and glass
mi crof i bers. The second coalesci ng phase uti li zes a densely wrapped
fiberglass for maximum efficiency. A cotton sock forms the most outer
layer of the filter to absorb the coalesced moisture.
filter provides a low saturated pressure drop and a consistent high solid
and li qu i d removal ef f i c i enc y whi c h ensu res opti mu m protec ti on of
downstream equipment.
c
u
m
u
l
a
t
i
v
e

v
o
l
u
m
e
t
r
i
c

e
f
f
i
c
i
e
n
c
y

o
f

p
a
r
t
i
c
l
e
s

>
D
p
Liquid Separation
c
u
m
u
l
a
t
i
v
e

v
o
l
u
m
e
t
r
i
c

e
f
f
i
c
i
e
n
c
y

o
f

p
a
r
t
i
c
l
e
s

>
D
p
Particle Separation
Prefilter Media (3): pleated microfiberglass coalescing media, a resin
impregnated cellulose support layer and a polyester drainage layer.
Gaskets (2): Wool felt
Flow direction: from inside to outside
C ;

F I L T R A T I O N
Medium Temperature Coalescer Filter Cartridges
Inside / outside diameter [mm]: 90/150
Lengths [mm]: 600, 735, 835, 1100
The P-DLS MT seri es i s a cost ef f ecti ve coalescer f i lter that removes
C. It's high performance is two-phased: Pre-filtering

and Coalescing.
Pre-filtering removes dirt particles using a three layered pre-filter that
is composed of resin impregnated pleated cellulose, polyester and glass
mi crof i bers. The second coalesci ng phase uti li zes a densely wrapped
fiberglass for maximum efficiency. A cotton sock forms the most outer
c
u
m
u
l
a
t
i
v
e

v
o
l
u
m
e
t
r
i
c

e
f
f
i
c
i
e
n
c
y

o
f

p
a
r
t
i
c
l
e
s

>
D
p
Liquid Separation
c
u
m
u
l
a
t
i
v
e

v
o
l
u
m
e
t
r
i
c

e
f
f
i
c
i
e
n
c
y

o
f

p
a
r
t
i
c
l
e
s

>
D
p
Particle Separation
Prefilter Media (3): pleated microfiberglass coalescing media, a resin
impregnated cellulose support layer and a polyester drainage layer.
Gaskets (2): Wool felt
C ;

F I L T R A T I O N
High Temperature Coalescer Filter Cartridges
The P-DLS HT seri es i s a cost ef f ecti ve coalescer f i lter that removes
This filter is recommended for high temperature applications with peak
C. It's co-pleated construction of reinforced Poly

Phenyl Sulfi de (PPS) felt medi a and densely wrapped fi berglass offers
maximum filtration performance. A terylene sock forms the most outer
Filter Media: Reinforced PPS felt (3) with an outer core of ultra fine
fiberglass and polyster (6).
Gasket (2): PPS
Inside / outside diameter [mm]:
90/150; 170/230
Lengths [mm]: 600, 735, 835, 1100
C ;

c
u
m
u
l
a
t
i
v
e

v
o
l
u
m
e
t
r
i
c

e
f
f
i
c
i
e
n
c
y

o
f

p
a
r
t
i
c
l
e
s

>
D
p
Particle Separation
c
u
m
u
l
a
t
i
v
e

v
o
l
u
m
e
t
r
i
c

e
f
f
i
c
i
e
n
c
y

o
f

p
a
r
t
i
c
l
e
s

>
D
p
Liquid Separation
Steenoven 11
5626 DK, Eindhoven
The Netherlands
Tel +31 1825 65395
Fax +31 1825 65325
www.petrogas.nl
F I L T R A T I O N

Petrogas Filtration Catalogue

Uploaded by

Copyright:

Available Formats

Petrogas Filtration Catalogue

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Petrogas Filtration Catalogue

Uploaded by

Copyright:

Available Formats

What are Petrogas' main products and services?

How does Petrogas ensure high quality in its products?

where nature and technology meet

C, relative humidity 44.8 %, particle diameter 0.3~17m

C, relative humidity 44.8 %, particle diameter 0.3~17m

C. The poly ester rei nf orc ement stabi li zes the

C (max. 20 min.) are acceptable.

C . The polyester reinforcement stabilizes

C (max. 20 min.) are acceptable.

C. It's pleated struc ture maxi mi zes the

C (max .30min.) are acceptable

C. It's composite structure of wound polyester

C (max .20min ) are acceptable

C. It's high performance is two-phased: Pre-filtering

C (max. 20 min.) are acceptable.

C. It's high performance is two-phased: Pre-filtering

C (max. 20 min.) are acceptable.

C. It's co-pleated construction of reinforced Poly

C (max. 20 min.) are acceptable.

You might also like