Challenge Germany Technique!

Surpass Japanese Quality!

www.quickjet.com.tw
0
2
.
2
0
1
1

/

1
0
0
0




0
3
-
0
1
6
E
/
S
-
S
u
n
w
a
y
-
0
4
-
2
3
2
2

7
9
0
7
QUICK JET MACHINE CO., LTD.
No. 42, Lane 887, Hemu Rd., Shengang Dist., Taichung City 42953, Taiwan.
TEL: +886- 4- 2561 9442 FAX: +886- 4- 2561 9325
E-Mail: business@quickjet.com.tw http:// www.quickjet.com.tw
QUICK JET GENERAL CATALOG
P. 1 P. 2
Quick Jet has set up maintenance and educational training centers in Taiwan headquarter,
Kunshan factory and Guangdong branch office. These enable us to offer comprehensive
and more efficient technical services and educational training for local customers.
( For cooling spindle circumference, motor and top and
bottom bearings plus spindle center cooling )
Technical R&D Sec.
(control system)
Taiwan
Team
Machine
Structure Sec.
Machining
Application Sec.
On-site Service
Technician
QUICK JET
SERVICE TEAM
Guangdong
Team
Global
agents team
Kunshan
Team
COMPREHENSIVE SPINDLE COOLING SOLUTION
Additioual spindle
center cooling
Conuentional Type
SPINDLE COOLING SYSTEM
Warming up time is reduced by 80%
T
h
e
r
m
a
l

e
l
o
n
g
a
t
io
n

is

g
r
e
a
t
l
y

im
p
r
o
v
e
d
THE COMPANY POLICY
Quick Jet is committed to offer the profitable and fully satisfied
mold machining equipment plus the comprehensive services
and technical sypport
The temperature of contact face between the
spindle and the HSK tool shank is about 30C
Exclusive Direct Lubrication System (DLS) provides the highest efficiency
lubrication to bearing, that dramatically extends the spindle service life.
The built-in spindle motor shaft ends are supported by 70mm high
precision ceramic bearings.
Extend the service life of spindle.
(Lower spindle temperature)
Shorten warm up time. (Within 3 minutes)
Increase stability of the spindle temperature.
The spindle does not add temperature to the
tool shank.
Decrease the total thermal elongation.
(Total thermal elongation is about 0.015mm
from power on to warm up finished)
Reduce the thermal growth of tool shank.
(Tool shank temperature is stable)
P. 1 P. 2
Quick Jet has set up maintenance and educational training centers in Taiwan headquarter,
Kunshan factory and Guangdong branch office. These enable us to offer comprehensive
and more efficient technical services and educational training for local customers.
( For cooling spindle circumference, motor and top and
bottom bearings plus spindle center cooling )
Technical R&D Sec.
(control system)
Taiwan
Team
Machine
Structure Sec.
Machining
Application Sec.
On-site Service
Technician
QUICK JET
SERVICE TEAM
Guangdong
Team
Global
agents team
Kunshan
Team
COMPREHENSIVE SPINDLE COOLING SOLUTION
Additioual spindle
center cooling
Conuentional Type
SPINDLE COOLING SYSTEM
Warming up time is reduced by 80%
T
h
e
r
m
a
l

e
l
o
n
g
a
t
io
n

is

g
r
e
a
t
l
y

im
p
r
o
v
e
d
THE COMPANY POLICY
Quick Jet is committed to offer the profitable and fully satisfied
mold machining equipment plus the comprehensive services
and technical sypport
The temperature of contact face between the
spindle and the HSK tool shank is about 30C
Exclusive Direct Lubrication System (DLS) provides the highest efficiency
lubrication to bearing, that dramatically extends the spindle service life.
The built-in spindle motor shaft ends are supported by 70mm high
precision ceramic bearings.
Extend the service life of spindle.
(Lower spindle temperature)
Shorten warm up time. (Within 3 minutes)
Increase stability of the spindle temperature.
The spindle does not add temperature to the
tool shank.
Decrease the total thermal elongation.
(Total thermal elongation is about 0.015mm
from power on to warm up finished)
Reduce the thermal growth of tool shank.
(Tool shank temperature is stable)
(High precision double circuits cooling system)
X.Y.Z-axis travel
Built-in type spindle

Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
700/400/350 mm
36,000 rpm
(Double circuits cooling system)
HSK-E50
800 kgs
1~24,000 mm/min
12 tools (20 tools opt.)
2,531 x 1,925 x 2,663 mm
5,030 kgs
P. 3 P. 4
AV-70S
Double Column CNC Milling and
Machining Center
AV-120S
GTV-97
Gantry Type CNC Milling and
Machining Center
AV-M8
Double Column CNC Milling and
Machining Center
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
700/400/350 mm
36,000 rpm
HSK-E50
800 kgs
1~24,000 mm/min
12 tools (20 tools opt.)
2,531 x 1,925 x 2,663 mm
5,030 kgs
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
900/600/500 mm
24,000 rpm
HSK-A63
Unrestricted
1~20,000 mm/min
20 tools
3,010 x 3,716 x 3,100 mm
11,000 kgs
X/Y/Z: 1,200 / 800 / 500 mm X/Y/Z: 700 / 400 / 350 mm
X/Y/Z: 900 / 600 / 500 mm X/Y/Z: 700 / 400 / 350 mm
(High precision double
circuits cooling system)
Double Column CNC Milling and
Machining Center
X.Y.Z-axis travel
Built-in type spindle

Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
1,200/800/500 mm
24,000 rpm
(Double circuits cooling system)
HSK-A63
1,500 kgs
1~20,000 mm/min
12 tools (20 tools opt.)
3,465 x 2,845 x 3,200 mm
11,000 kgs
(High precision double circuits cooling system)
X.Y.Z-axis travel
Built-in type spindle

Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
700/400/350 mm
36,000 rpm
(Double circuits cooling system)
HSK-E50
800 kgs
1~24,000 mm/min
12 tools (20 tools opt.)
2,531 x 1,925 x 2,663 mm
5,030 kgs
P. 3 P. 4
AV-70S
Double Column CNC Milling and
Machining Center
AV-120S
GTV-97
Gantry Type CNC Milling and
Machining Center
AV-M8
Double Column CNC Milling and
Machining Center
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
700/400/350 mm
36,000 rpm
HSK-E50
800 kgs
1~24,000 mm/min
12 tools (20 tools opt.)
2,531 x 1,925 x 2,663 mm
5,030 kgs
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
900/600/500 mm
24,000 rpm
HSK-A63
Unrestricted
1~20,000 mm/min
20 tools
3,010 x 3,716 x 3,100 mm
11,000 kgs
X/Y/Z: 1,200 / 800 / 500 mm X/Y/Z: 700 / 400 / 350 mm
X/Y/Z: 900 / 600 / 500 mm X/Y/Z: 700 / 400 / 350 mm
(High precision double
circuits cooling system)
Double Column CNC Milling and
Machining Center
X.Y.Z-axis travel
Built-in type spindle

Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
1,200/800/500 mm
24,000 rpm
(Double circuits cooling system)
HSK-A63
1,500 kgs
1~20,000 mm/min
12 tools (20 tools opt.)
3,465 x 2,845 x 3,200 mm
11,000 kgs
AV-128 (128H)
AV-1612
Double Column CNC Milling and
Machining Center
AV-3020
Double Column Machining Center
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine dimensions
Machine weight
1,600/1,200/700 mm
HSK-A63: 24,000 rpm
HSK-A80: 14,000 rpm
HSK-A100: 10,000 / 14,000 rpm
HSK-A63/HSK-A80/HSK-A100
4,000 kgs
1~20,000 mm/min
HSK-A63: 20 tools
HSK-A80: 16 tools / HSK-A100: 16 tools
(30 / 60 tools opt.)
4,936 x 3,464 x 3,610 mm
(HSK-A63 / HSK-A80 / HSK-A100 (16 tools))
4,936 x 3,812 x 3,610 mm
(HSK-A100 (30 tools))
17,000 kgs / 19,400 kgs
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
3,000/2,000/800 mm
10,000;14,000 rpm
24,000 rpm
HSK-A100/HSK-A63
15,000 kgs
1~20,000 mm/min
HSK-A100 16 tools
HSK-A63 20 tools
8,560 x 6,535 x 4,660 mm
53,000 kgs
P. 5 P. 6
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool
changer
Machine
dimensions
Machine weight
1,200/800/500 (700) mm
24,000 rpm (14,000 rpm)
HSK-A63 (HSK-A80)
1,500 kgs
1~20,000 mm/min
HSK-A63 12 tools (20 tools opt.)
HSK-A80 16 tools
3,465 x 2,845 x 3,200 mm
(4,335 x 2,860 x 3,620 mm)
11,000 kgs (12,350 kgs)
Double Column CNC Milling and
Machining Center
H-56
Horizontal Machining Center
X/Y/Z: 500 / 600 / 600 mm X/Y/Z: 1,600 / 1,200 / 700 mm
X/Y/Z: 3,000 / 2,000 / 800 mm
X/Y/Z: 1,200 / 800 / 500 (700) mm
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine
dimensions
Machine weight
500/600/600 mm
24,000 rpm
HSK-A63
500 kgs
1~36,000 mm/min
40 tools (60 tools opt.)
4,238 x 3,132 x 2,812 mm(40 tools)
4,425 x 3,270 x 2,870 mm(60 tools)
9,800 kgs / 10,000 kgs
AV-128 (128H)
AV-1612
Double Column CNC Milling and
Machining Center
AV-3020
Double Column Machining Center
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine dimensions
Machine weight
1,600/1,200/700 mm
HSK-A63: 24,000 rpm
HSK-A80: 14,000 rpm
HSK-A100: 10,000 / 14,000 rpm
HSK-A63/HSK-A80/HSK-A100
4,000 kgs
1~20,000 mm/min
HSK-A63: 20 tools
HSK-A80: 16 tools / HSK-A100: 16 tools
(30 / 60 tools opt.)
4,936 x 3,464 x 3,610 mm
(HSK-A63 / HSK-A80 / HSK-A100 (16 tools))
4,936 x 3,812 x 3,610 mm
(HSK-A100 (30 tools))
17,000 kgs / 19,400 kgs
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
3,000/2,000/800 mm
10,000;14,000 rpm
24,000 rpm
HSK-A100/HSK-A63
15,000 kgs
1~20,000 mm/min
HSK-A100 16 tools
HSK-A63 20 tools
8,560 x 6,535 x 4,660 mm
53,000 kgs
P. 5 P. 6
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool
changer
Machine
dimensions
Machine weight
1,200/800/500 (700) mm
24,000 rpm (14,000 rpm)
HSK-A63 (HSK-A80)
1,500 kgs
1~20,000 mm/min
HSK-A63 12 tools (20 tools opt.)
HSK-A80 16 tools
3,465 x 2,845 x 3,200 mm
(4,335 x 2,860 x 3,620 mm)
11,000 kgs (12,350 kgs)
Double Column CNC Milling and
Machining Center
H-56
Horizontal Machining Center
X/Y/Z: 500 / 600 / 600 mm X/Y/Z: 1,600 / 1,200 / 700 mm
X/Y/Z: 3,000 / 2,000 / 800 mm
X/Y/Z: 1,200 / 800 / 500 (700) mm
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine
dimensions
Machine weight
500/600/600 mm
24,000 rpm
HSK-A63
500 kgs
1~36,000 mm/min
40 tools (60 tools opt.)
4,238 x 3,132 x 2,812 mm(40 tools)
4,425 x 3,270 x 2,870 mm(60 tools)
9,800 kgs / 10,000 kgs
GTV-95X
5 Axes Machining Center
GTV-97G
Gantry Type Graphite Cutting and
Machining Center
AV-70G
Graphite Cutting and Machining Center
AV-M8G
Graphite Cutting and Machining Center
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
900/600/500 mm
24,000 rpm
HSK-A63
Unrestricted
1~20,000 mm/min
20 tools
3,010 x 3,716 x 3,100 mm
11,240 kgs
X.Y.Z-axis travel
Built-in type spindle

Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
700/400/350 mm
36,000 rpm
(Double circuits cooling system)
HSK-E50
800 kgs
1~24,000 mm/min
12 tools (20 tools opt.)
2,531 x 1,925 x 2,663 mm
5,270 kgs
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
700/400/350 mm
36,000 rpm
HSK-E50
800 kgs
1~24,000 mm/min
12 tools (20 tools opt.)
2,531 x 1,925 x 2,663 mm
5,270 kgs
SMALL CYLINDER
Top diameter : 0.1 mm
Bottom diameter : 0.27 mm
Taper : 0
Height : 5 mm
HELIX
Height : 30 mm
Taper : 0.3
Thickness : 0.1 mm
GRAPHITE SHEET
Height : 40 mm
Width : 6 mm
Taper : 0
Thickness : 0.08 mm
X/Y/Z: 700 / 400 / 350 mm X/Y/Z: 900 / 600 / 500 mm
X/Y/Z: 700 / 400 / 350 mm X/Y/Z: 900 / 600 / 480 mm
P. 7 P. 8
Sieved air flow
Hand-held
dust collector
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
A-axis
C-axis
Machine dimensions
Machine weight
900/600/480 mm
24,000 rpm
HSK-A63
300 kgs
1~20,000 mm/min
20 tools
+30~120
0~360
3,010 x 3,716 x 3,100 mm
12,000 kgs
GTV-95X
5 Axes Machining Center
GTV-97G
Gantry Type Graphite Cutting and
Machining Center
AV-70G
Graphite Cutting and Machining Center
AV-M8G
Graphite Cutting and Machining Center
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
900/600/500 mm
24,000 rpm
HSK-A63
Unrestricted
1~20,000 mm/min
20 tools
3,010 x 3,716 x 3,100 mm
11,240 kgs
X.Y.Z-axis travel
Built-in type spindle

Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
700/400/350 mm
36,000 rpm
(Double circuits cooling system)
HSK-E50
800 kgs
1~24,000 mm/min
12 tools (20 tools opt.)
2,531 x 1,925 x 2,663 mm
5,270 kgs
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
Machine dimensions
Machine weight
700/400/350 mm
36,000 rpm
HSK-E50
800 kgs
1~24,000 mm/min
12 tools (20 tools opt.)
2,531 x 1,925 x 2,663 mm
5,270 kgs
SMALL CYLINDER
Top diameter : 0.1 mm
Bottom diameter : 0.27 mm
Taper : 0
Height : 5 mm
HELIX
Height : 30 mm
Taper : 0.3
Thickness : 0.1 mm
GRAPHITE SHEET
Height : 40 mm
Width : 6 mm
Taper : 0
Thickness : 0.08 mm
X/Y/Z: 700 / 400 / 350 mm X/Y/Z: 900 / 600 / 500 mm
X/Y/Z: 700 / 400 / 350 mm X/Y/Z: 900 / 600 / 480 mm
P. 7 P. 8
Sieved air flow
Hand-held
dust collector
X.Y.Z-axis travel
Built-in type spindle
Spindle nose taper
Max. table load
Cutting feedrate
Automatic tool changer
A-axis
C-axis
Machine dimensions
Machine weight
900/600/480 mm
24,000 rpm
HSK-A63
300 kgs
1~20,000 mm/min
20 tools
+30~120
0~360
3,010 x 3,716 x 3,100 mm
12,000 kgs
X.Y.Z-axis travel
Spindle speed
Spindle torque output
Spindle power
Workpiece weight
Feedrate
Table area (rotary table)
A-axis (universal head)
B-axis (rotary table)
C-axis (universal head)
Machine dimensions
Machine weight
1,600 (1,200, 2,000)
x 1,200 x 800 mm
1~10,000 rpm
195 Nm (S1/100%)
25 kw (S1/100%), HSK-100
Max. 18,000 kgs
30,000 mm/min
1,600 x 1,600 mm
-2/+95
n x 360
+/-182
7,430 x 7,945 x 3,587 mm
34,000 kgs
EQUIPMENT FOR MOLD MACHINING
(OPTIONAL)
VF-3016
Vertical 5 Axes Machining Center
HF-1612
Horizontal 7 Axes Machining Center
QJM-2# / QJM-QB
Turret Type Vertical Milling Machine
X.Y.Z-axis travel
Spindle speed
Spindle torque output
Spindle power
Workpiece weight
Feedrate
Table area
B-axis
C-axis
Machine dimensions
Machine weight
3,000 x 1,600 x 1,000 mm
24,000 rpm
67 Nm
42 kw
Max. 7,000 kgs/m
2
30,000 mm/min
3,500 x 1,750 mm
+/-100
+/-250
7,500 x 5,225 x 4,870 mm
48,000 kgs
P. 9 P. 10
QJM-2#
(A2, S2)
QJM-QB
(VA, VS)
For upgrading your
existing equipment into a
high-speed machining
era. The spindle speed
reaches 8,000 rpm.
The spindle runs in air
bearing to eliminate
transmission-backlash
problem.
AIR SPINDLE
40,000 RPM
For upgrading your
existing equipment into a
high-speed machining
era. The spindle speed
reaches 4,000 rpm.
Rigid ceramic bearings
provide outstanding
cutting performance.
The moval oil mist
separator are equipped
with 8 layers of filtrating
screens. It provides
good air quality in the
working environment,
ensuring the operators
health and upgrading
working efficiency.
OIL MIST
COOLING UNIT
The oil mist cooling unit may
help to extend tool service life
and better finish of cutting
surfaces. It avoid poor
affection on environment and
the operator usually caused
by conventional cutting fluid.
AIR SPINDLE
80,000 RPM
The measuring system allows
for direct measuring of
workpiece on the machine
after machining. The
measured values will be
compared with that of CAD
drawing. This provides a
comparison of error
between the actual
workpiece data and the
designed data. In addition,
it can be applied for
checking tolerance before
performing finish cut that
saves time waste in
ineffective machining.
3D ON-LINE
MEASURING SYSTEM
This device permits workpiece sizes to be
accurately measured on the machine without
unloading of the workpiece.
2D IMAGE MEASURING DEVICE
X/Y/Z: 1,600 (1,200, 2,000) x 1,200 x 800 mm
X/Y/Z: 3,000 x 1,600 x 1,000 mm
The manufacturer reserves the rights of design change.
OIL MIST
SEPARATOR
X.Y.Z-axis travel
Spindle speed
Spindle torque output
Spindle power
Workpiece weight
Feedrate
Table area (rotary table)
A-axis (universal head)
B-axis (rotary table)
C-axis (universal head)
Machine dimensions
Machine weight
1,600 (1,200, 2,000)
x 1,200 x 800 mm
1~10,000 rpm
195 Nm (S1/100%)
25 kw (S1/100%), HSK-100
Max. 18,000 kgs
30,000 mm/min
1,600 x 1,600 mm
-2/+95
n x 360
+/-182
7,430 x 7,945 x 3,587 mm
34,000 kgs
EQUIPMENT FOR MOLD MACHINING
(OPTIONAL)
VF-3016
Vertical 5 Axes Machining Center
HF-1612
Horizontal 7 Axes Machining Center
QJM-2# / QJM-QB
Turret Type Vertical Milling Machine
X.Y.Z-axis travel
Spindle speed
Spindle torque output
Spindle power
Workpiece weight
Feedrate
Table area
B-axis
C-axis
Machine dimensions
Machine weight
3,000 x 1,600 x 1,000 mm
24,000 rpm
67 Nm
42 kw
Max. 7,000 kgs/m
2
30,000 mm/min
3,500 x 1,750 mm
+/-100
+/-250
7,500 x 5,225 x 4,870 mm
48,000 kgs
P. 9 P. 10
QJM-2#
(A2, S2)
QJM-QB
(VA, VS)
For upgrading your
existing equipment into a
high-speed machining
era. The spindle speed
reaches 8,000 rpm.
The spindle runs in air
bearing to eliminate
transmission-backlash
problem.
AIR SPINDLE
40,000 RPM
For upgrading your
existing equipment into a
high-speed machining
era. The spindle speed
reaches 4,000 rpm.
Rigid ceramic bearings
provide outstanding
cutting performance.
The moval oil mist
separator are equipped
with 8 layers of filtrating
screens. It provides
good air quality in the
working environment,
ensuring the operators
health and upgrading
working efficiency.
OIL MIST
COOLING UNIT
The oil mist cooling unit may
help to extend tool service life
and better finish of cutting
surfaces. It avoid poor
affection on environment and
the operator usually caused
by conventional cutting fluid.
AIR SPINDLE
80,000 RPM
The measuring system allows
for direct measuring of
workpiece on the machine
after machining. The
measured values will be
compared with that of CAD
drawing. This provides a
comparison of error
between the actual
workpiece data and the
designed data. In addition,
it can be applied for
checking tolerance before
performing finish cut that
saves time waste in
ineffective machining.
3D ON-LINE
MEASURING SYSTEM
This device permits workpiece sizes to be
accurately measured on the machine without
unloading of the workpiece.
2D IMAGE MEASURING DEVICE
X/Y/Z: 1,600 (1,200, 2,000) x 1,200 x 800 mm
X/Y/Z: 3,000 x 1,600 x 1,000 mm
The manufacturer reserves the rights of design change.
OIL MIST
SEPARATOR
Challenge Germany Technique!
Surpass Japanese Quality!
www.quickjet.com.tw
0
2
.
2
0
1
1

/

1
0
0
0




0
3
-
0
1
6
E
/
S
-
S
u
n
w
a
y
-
0
4
-
2
3
2
2

7
9
0
7
QUICK JET MACHINE CO., LTD.
No. 42, Lane 887, Hemu Rd., Shengang Dist., Taichung City 42953, Taiwan.
TEL: +886- 4- 2561 9442 FAX: +886- 4- 2561 9325
E-Mail: business@quickjet.com.tw http:// www.quickjet.com.tw
QUICK JET GENERAL CATALOG