BSI List

Code of Practice
Standard Number Title

BS 10175:2001 Investigation of potentially contaminated sites. Code of practice
BS 1041-2.2:1989
Code for temperature measurement. Expansion thermometers. Guide to
selection and use of dial-type expansion thermometers
BS 1133-21:1991
Packaging code. Regenerated cellulose film, films made of plastics,
aluminium foil, flexible multilayer structures and metallized materials
BS 1133-22:1989 Packaging code. Packaging in plastics containers
BS 1133-6.1:1991
Packaging code. Protection of metal surfaces against corrosion during
transport and storage. Cleaning and drying of metal surfaces
BS 1133-6.2:1991
Packaging code. Protection of metal surfaces against corrosion during
transport and storage. Temporary protectives and their application
BS 1133-7.5:1990
Packaging code. Paper and board wrappers, bags and containers.
Fibreboard cases and fitments
BS 1133-8:1991 Packaging code. Wooden boxes, cases and crates
BS 1192-5:1998
Construction drawing practice. Guide for structuring and exchange of
CAD data
BS 15000-2:2003 IT service management. Code of practice for service management
BS 1747-11:1993, ISO
9835:1993
Methods for measurement of air pollution. Determination of a black
smoke index in ambient air
BS 1747-12:1993, ISO
10313:1993
Methods for measurement of air pollution. Determination of the mass
concentration of ozone in ambient air: chemiluminescence method
BS 1804-2:1968 Specification for parallel steel dowel pins. Metric series
BS 1881-124:1988 Testing concrete. Methods for analysis of hardened concrete
BS 1881-128:1997 Testing concrete. Methods for analysis of fresh concrete
BS 1881-207:1992
Testing concrete. Recommendations for the assessment of concrete
strength by near-to-surface tests
BS 1881-209:1990
Testing concrete. Recommendations for the measurement of dynamic
modulus of elasticity
BS 1983-5:1989
Chucks for machine tools and portable power tools. Code of practice for
the safe operation of workholding chucks used on lathes
BS 215-1:1970
Specification for aluminium conductors and aluminium conductors, steel-
reinforced for overhead power transmission. Aluminium stranded
conductors
BS 215-2:1970
Specification for aluminium conductors and aluminium conductors, steel-
reinforced for overhead power transmission. Aluminium conductors, steel-
rei nforced
BS 2499-2:1992
Hot-applied joint sealant systems for concrete pavements. Code of
practice for the application and use of joint sealants
BS 2846-1:1991
Guide to statistical interpretation of data. Routine analysis of quantitative
data
Code of Practice
BS 2846-7:1997, ISO
5479:1997
Guide to statistical interpretation of data. Tests for departure from
normality
BS 2856:1973 Precise conversion of inch and metric sizes on engineering drawings
BS 2979:1958 Transliteration of Cyrillic and Greek characters
BS 2M 47:1990 Specification for retreading of cross ply tyres for aircraft
BS 3015:1991, ISO
2041:1990
Glossary of terms relating to mechanical vibration and shock
BS 3156-11.1.2:1997,
ISO 6975:1997
Analysis of fuel gases. Methods for non-manufactured gases.
Hydrocarbons and inert gases. Extended analysis by gas chromatographic
method
BS 3424-28:1995 Testing coated fabrics. Method 31. Determination of specular gloss
BS 3445-2:1992
Agricultural water troughs and water fittings. Code of practice for
installation and operation
BS 3533:1981 Glossary of thermal insulation terms
BS 3567:1985
Code of practice for preparation of flowsheets for the design of coal
preparation plant
BS 3690-3:1990
Bitumens for building and civil engineering. Specification for mixtures of
bitumen with pitch, tar and Trinidad lake asphalt
BS 3843-1:1992
Guide to terotechnology (the economic management of assets).
Introduction to terotechnology
BS 3880-3:1971
Specification for paper tape for data processing. Representation of codes
on paper tape
BS 3890:1965
General recommendations for the testing, calibration and processing of
radiation monitoring films
BS 3900-B3:1983
Methods of test for paints. Tests involving chemical examination of liquid
paints and dried paint films. Determination of 'soluble' lead in the so lid
matter in liquid paints: method for use in conjunction with The Control of
Lead at Work Regulations, 1980 (S.I. 1980 No. 1248)
BS 3934-10:1992
Mechanical standardization of semiconductor devices. Schedule of UK
national drawings giving dimensions
BS 4018:1966
Specification for pulley blocks for use with wire rope for a maximum lift
of 25 tonf in combination
BS 4078-1:1987 Powder actuated fixing systems. Code of practice for safe use
BS 4163:2000
Health and safety for design and technology in schools and similar
establishments. Code of practice
BS 4193-16:1986, ISO
7848-1986
Hardmetal insert tooling. Specification for designation of shank type
milling cutters for indexable inserts
BS 434-2:1984
Bitumen road emulsions (anionic and cationic). Code of practice for use
of bitumen road emulsions
BS 4401-4:1970
Methods of test for meat and meat products. Determination of total fat
content
Code of Practice
BS 4428:1989
Code of practice for general landscape operations (excluding hard
surfaces)
BS 4485-3:1988 Water cooling towers. Code of practice for thermal and functional design
BS 4485-4:1996
Water cooling towers. Code of practice for structural design and
construction
BS 4636-3:1986, ISO
6586-1980
Punched cards. Specification for representation of 7-bit and 8-bit coded
character sets on 12-row punched cards
BS 4737-4.3:1988
Intruder alarm systems in buildings. Codes of practice. Code of practice
for exterior alarm systems
BS 476-15:1993, ISO
5660-1:1993
Fire tests on building materials and structures. Method for measuring the
rate of heat release of products
BS 4877:1972
Recommendations for general principles of nuclear reactor
instrumentation
BS 4978:1996 Specification for visual strength grading of softwood
BS 5070-1:1988
Engineering diagram drawing practice. Recommendations for general
principles
BS 5079:1981
Specification for information interchange on 3.81 mm (0.150 in) magnetic
tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1600 ftpi)
BS 5131-6.1:1981
Methods of test for footwear and footwear materials. Codes of practice.
Code of practice for the comparative evaluation by wear trial of materials
, components or constructions
BS 5131-6.2:1979
Methods of test for footwear and footwear materials. Codes of practice.
Code of practice for the identification in footwear wear trials of major w
eaknesses in design or construction and the assessment of fitness-for-
purpose
BS 5163-1:2004
Valves for waterworks purposes. Predominantly key-operated cast iron
gate valves. Code of practice
BS 5209:1975
Code of practice for the testing of sulphur hexafluoride taken from
electrical equipment
BS 5212-2:1990
Cold applied joint sealant systems for concrete pavements. Code of
BS 5228-4:1992
Noise and vibration control on construction and open sites. Code of
practice for noise and vibration control applicable to piling operations
BS 5228-5:1997
Noise and vibration control on construction and open sites. Code of
practice applicable to surface mineral extraction (except coal) sites
BS 5234-1:1992
Partitions (including matching linings). Code of practice for design and
installation
BS 5250:2002 Code of practice for control of condensation in buildings
BS 5260:1975 Code of practice for radio interference suppression on marine installations
BS 5262:1991 Code of practice for external renderings
Code of Practice
BS 5266-2:1998
Emergency lighting. Code of practice for electrical low mounted way
guidance systems for emergency use
BS 5268-2:2002
Structural use of timber. Code of practice for permissible stress design,
materials and workmanship
BS 5268-3:1998 Structural use of timber. Code of practice for trussed rafter roofs
BS 5268-4.2:1990
Structural use of timber. Fire resistance of timber structures.
Recommendations for calculating fire resistance of timber stud walls and
joisted f loor constructions
BS 5268-5:1989
Structural use of timber. Code of practice for the preservative treatment
of structural timber
BS 5268-6.1:1996
Structural use of timber. Code of practice for timber frame walls.
Dwellings not exceeding four storeys
BS 5305:1984
Code of practice for cleaning and disinfecting of plant and equipment
used in the dairying industry
BS 5306-3:2003
Fire extinguishing installations and equipment on premises. Code of
practice for the inspection and maintenance of portable fire extinguishers
BS 5306-5.1:1992
Code of practice for fire extinguishing installations and equipment on
premises. Halon systems. Specification for halon 1301 total flooding
system s
BS 5306-8:2000
Fire extinguishing installations and equipment on premises. Selection and
installation of portable fire extinguishers. Code of practice
BS 5325:2001 Installation of textile floor coverings. Code of practice
BS 5338:1976 Code of practice for zinc alloy pressure die casting for engineering
BS 5357:1995 Code of practice for installation of security glazing
BS 5385-3:1989
Wall and floor tiling. Code of practice for the design and installation of
ceramic floor tiles and mosaics
BS 5385-4:1992
Wall and floor tiling. Code of practice for tiling and mosaics in specific
conditions
BS 5385-5:1994
terrazzo tile and slab, natural stone and composition block floorings
BS 5395-2:1984
Stairs, ladders and walkways. Code of practice for the design of helical
and spiral stairs
BS 5395-3:1985
Stairs, ladders and walkways. Code of practice for the design of industrial
type stairs, permanent ladders and walkways
BS 5400-10:1980 Steel, concrete and composite bridges. Code of practice for fatigue
BS 5400-3:2000
Steel, concrete and composite bridges. Code of practice for design of
steel bridges
BS 5400-4:1990
concrete bridges
BS 5400-5:1979
composite bridges
Code of Practice
BS 5400-9.1:1983
Steel, concrete and composite bridges. Bridge bearings. Code of practice
for design of bridge bearings
BS 5410-2:1978
Code of practice for oil firing. Installations of 45 kW and above output
capacity for space heating, hot water and steam supply services
BS 5410-3:1976
Code of practice for oil firing. Installations for furnaces, kilns, ovens and
other industrial purposes
BS 5427-1:1996
Code of practice for the use of profiled sheet for roof and wall cladding
on buildings. Design
BS 5429:1976
Code of practice for safe operation of small-scale storage facilities for
cryogenic liquids
BS 5489-1:2003
Code of practice for the design of road lighting. Lighting of roads and
public amenity areas
BS 5489-2:2003 Code of practice for the design of road lighting. Lighting of tunnels
BS 5492:1990 Code of practice for internal plastering
BS 5499-4:2000
Safety signs, including fire safety signs. Code of practice for escape route
signing
BS 5502-21:1990
Buildings and structures for agriculture. Code of practice for selection
and use of construction materials
BS 5502-22:2003
Buildings and structures for agriculture. Code of practice for design,
construction and loading
BS 5502-23:2004 Buildings and structures for agriculture. Fire precautions. Code of
BS 5502-25:1991
Buildings and structures for agriculture. Code of practice for design and
installation of services and facilities
BS 5502-30:1992
Buildings and structures for agriculture. Code of practice for control of
infestation
BS 5502-42:1990
construction of pig buildings
BS 5502-43:1990
construction of poultry buildings
BS 5502-49:1990
construction of milking premises
BS 5502-51:1991
construction of slatted, perforated and mesh floors for livestock
BS 5502-65:1992
construction of crop processing buildings
BS 5502-66:1992
construction of chitting houses
BS 5502-75:1993
Buildings and structures for agriculture. Code of practice for the design
and construction of forage stores
BS 5502-80:1990
construction of workshops, maintenance and inspection facilities
Code of Practice
BS 5502-81:1989
construction of chemical stores
BS 5502-82:1997
Buildings and structures for agriculture. Code of practice for design of
amenity buildings
BS 5516-2:2004
Patent glazing and sloping glazing for buildings. Code of practice for
sloping glazing
BS 5531:1988 Code of practice for safety in erecting structural frames
BS 5534:2003 Code of practice for slating and tiling (including shingles)
BS 5551-4.1.5:1993,
ISO 8603:1993
Fertilizers. Chemical analysis. Determination of nitrogen. Method for
determination of urea nitrogen content (gravimetric method using
xanthydrol)
BS 5552:1978, IEC
60568:1977
Code of practice for in-core instrumentation for neutron fluence rate
(flux) measurements in power reactors
BS 5588-0:1996
Fire precautions in the design, construction and use of buildings. Guide to
fire safety codes of practice for particular premises/applications
BS 5588-1:1990
Fire precautions in the design, construction and use of buildings. Code of
practice for residential buildings
BS 5588-10:1991
practice for shopping complexes
BS 5588-11:1997
practice for shops, offices, industrial, storage and other similar buil dings
BS 5588-6:1991
practice for places of assembly
BS 5588-7:1997
practice for the incorporation of atria in buildings
BS 5588-8:1999
practice for means of escape for disabled people
BS 5589:1989 Code of practice for preservation of timber
BS 5607:1998 Code of practice for the safe use of explosives in the construction
BS 5624:1978
Code of practice for the lining of vessels and equipment for chemical
processes: copper and copper alloys
BS 5628-1:1992
Code of practice for use of masonry. Structural use of unreinforced
masonry
BS 5628-3:2001
Code of practice for use of masonry. Materials and components, design
and workmanship
BS 5655-6:2002
Lifts and service lifts. Code of practice for the selection and installation
of new lifts
BS 5672:1991, ISO
1204:1990
Specification for designation of the direction of rotation and of cylinders
and valves in cylinder heads, and definition of right-hand and left-ha nd
in-line engines and locations on an engine for reciprocating internal
combustion engines
Code of Practice
BS 5756:1997 Specification for visual strength grading of hardwood
BS 5806:1979, ISO
5972:1978
Method of measurement of thickness for mica blocks, thins, films and
splittings
BS 5839-1:2002
Fire detection and alarm systems for buildings. Code of practice for
system design, installation, commissioning and maintenance
BS 5839-8:1998
Fire detection and alarm systems for buildings. Code of practice for the
design, installation and servicing of voice alarm systems
BS 5854:1980 Code of practice for flues and flue structures in buildings
BS 5906:1980
Code of practice for storage and on-site treatment of solid waste from
buildings
BS 5908:1990 Code of practice for fire precautions in the chemical and allied industries
BS 5925:1991
Code of practice for ventilation principles and designing for natural
ventilation
BS 5927:1980, ISO
4482-1979
Guide for laying of asbestos-cement pipelines
BS 5930:1999 Code of practice for site investigations
BS 5931:1980 Code of practice for machine laid in situ edge details for paved areas
BS 5950-1:2000
Structural use of steelwork in building. Code of practice for design.
Rolled and welded sections
BS 5950-3.1:1990
Structural use of steelwork in building. Design in composite construction.
Code of practice for design of simple and continuous composite beams
BS 5950-4:1994
Structural use of steelwork in building. Code of practice for design of
composite slabs with profiled steel sheeting
BS 5950-5:1998
cold formed thin gauge sections
BS 5950-6:1995
light gauge profiled steel sheeting
BS 5950-8:2003
Structural use of steelwork in building. Code of practice for fire resistant
design
BS 5950-9:1994
Structural use of steelwork in building. Code of practice for stressed skin
design
BS 5954-2:1985, IEC
60297-2:1982
Dimensions of mechanical structures of the 482.6 mm (19 in) series.
Specification for cabinets and pitches of rack structures
BS 5958-1:1991
Code of practice for control of undesirable static electricity. General
considerations
BS 5958-2:1991
Code of practice for control of undesirable static electricity.
Recommendations for particular industrial situations
BS 5961:1980, IEC
60648:1979
Method for determination of coefficients of friction of plastic film and
sheeting for use as electrical insulation
BS 5974:1990
Code of practice for temporarily installed suspended scaffolds and access
equipment
Code of Practice
BS 5975:1996 Code of practice for falsework
BS 5979:2000
Code of practice for remote centres receiving signals from security
systems
BS 6031:1981 Code of practice for earthworks
BS 6069-1:1994, ISO
4226:1993
Characterization of air quality. Units of measurement
BS 6069-3.3:1991, ISO
9486:1991
Characterization of air quality. Workplace atmospheres. Method for the
determination of vaporous chlorinated hydrocarbons by charcoal
tube/solvent desorption/gas chromatography
BS 6069-3.4:1991, ISO
9487:1991
Characterization of air quality. Workplace atmospheres. Method for the
determination of vaporous aromatic hydrocarbons by charcoal
tube/solvent de sorption/gas chromatography
BS 6069-4.1:1990, ISO
7934:1989
Characterization of air quality. Stationary source emissions. Method for
the determination of the mass concentration of sulphur dioxide: hydrogen
peroxide/barium perchlorate/Thorin method
BS 6069-4.4:1993, ISO
7935:1992
Characterization of air quality. Stationary source emissions.
Determination of the mass concentration of sulfur dioxide. Performance
characteristi cs of automated measuring methods
BS 6089:1981 Guide to assessment of concrete strength in existing structures
BS 6093:1993 Code of practice for design of joints and jointing in building construction
BS 6100-2.2.2:1999
Glossary of building and civil engineering terms. Civil engineering.
Substructures. Earthworks. Foundations. Tunnels. Substructures and
foundation s
BS 6109-2:1989
Tail lifts, mobile lifts and ramps associated with vehicles. Code of
practice for passenger lifts and ramps
BS 6121-5:2005
Mechanical cable glands. Code of practice for selection, installation and
inspection of cable glands and armour glands
BS 6129-1:1981
Code of practice for the selection and application of bellows expansion
joints for use in pressure systems. Metallic bellows expansion joints
BS 6132:1983
Code of practice for safe operation of alkaline secondary cells and
batteries
BS 6150:1991 Code of practice for painting of buildings
BS 6164:2001 Code of practice for safety in tunnelling in the construction industry
BS 6180:1999 Barriers in and about buildings. Code of practice
BS 6187:2000 Code of practice for demolition
BS 6200-3.1.4:1990, EN
29658:1991, ISO
9658:1990
Sampling and analysis of iron, steel and other ferrous metals. Methods of
analysis. Determination of aluminium. Non-alloyed steel: flame atomic ab
sorption spectrometric method
BS 6200-3.10.2:1989,
EN 10188:1989
analysis. Determination of chromium. Steel and cast iron: flame atomic a
bsorption spectrometric method
Code of Practice
BS 6200-3.20.1:1989,
EN 24938:1990, ISO
4938:1988
analysis. Determination of nickel. Steel and cast iron: gravimetric or t
itrimetric method
BS 6200-3.34.2:1989,
ISO 4942:1988
analysis. Determination of vanadium. Steel and cast iron: spectrophotome
tric method
BS 6221-22:1990
Printed wiring boards. Guide to the use of printed wiring board substrate
materials: surface mount technology
BS 6229:2003 Flat roofs with continuously supported coverings. Code of practice
BS 6238:1982 Code of practice for performance monitoring of computer-based systems
BS 6244:1982, ISO
5388-1981
Code of practice for stationary air compressors
BS 6259:1997
Code of practice for the design, planning, installation, testing and
maintenance of sound systems
BS 6262:1982 Code of practice for glazing for buildings
BS 6263-2:1991
Care and maintenance of floor surfaces. Code of practice for resilient
sheet and tile flooring
BS 6266:2002 Code of practice for fire protection for electronic equipment installations
BS 6270-3:1991
Code of practice for cleaning and surface repair of buildings. Metals
(cleaning only)
BS 6279-2:2001, ISO
6322-2:2000
Storage of cereals and pulses. Practical recommendations
BS 6287:1982 Code of practice for safe operation of traction batteries
BS 6288-11:1989, IEC
60094-11:1988
Magnetic tape sound recording and reproducing systems. Guide to an
address code for compact cassettes
BS 6297:1983
Code of practice for design and installation of small sewage treatment
works and cesspools
BS 6319-6:1984
Testing of resin and polymer/cement compositions for use in
construction. Method for determination of modulus of elasticity in
BS 6319-7:1985
construction. Method for measurement of tensile strength
BS 6319-8:1984
construction. Method for the assessment of resistance to liquids
BS 6319-9:1987
construction. Method for measurement and classification of peak
BS 6330:1983 Code of practice for reception of sound and television broadcasting
BS 6349-1:2000 Maritime structures. Code of practice for general criteria
BS 6349-4:1994
Maritime structures. Code of practice for design of fendering and
mooring systems
BS 6349-5:1991 Maritime structures. Code of practice for dredging and land reclamation
Code of Practice
BS 6351-3:1983
Electric surface heating. Code of practice for the installation, testing and
maintenance of electric surface heating systems
BS 6399-1:1996 Loading for buildings. Code of practice for dead and imposed loads
BS 6399-2:1997 Loading for buildings. Code of practice for wind loads
BS 6399-3:1988 Loading for buildings. Code of practice for imposed roof loads
BS 6423:1983
Code of practice for maintenance of electrical switchgear and controlgear
for voltages up to and including 1 kV
BS 6429:1989, ISO
6936:1988
Method for conversion between the two coded character sets of BS 4730
(ISO 646) and BS 6692:Part 2 (ISO 6937-2) and the CCITT international
telegr aph alphabet No. 2 (ITA 2)
BS 6440:1999 Powered lifting platforms for use by disabled persons. Code of practice
BS 6465-1:1994
Sanitary installations. Code of practice for scale of provision, selection
and installation of sanitary appliances
BS 6465-2:1996
Sanitary installations. Code of practice for space requirements for sanitary
appliances
BS 6466:1984
Code of practice for design and installation of ceramic fibre furnace
linings
BS 6511:1984, ISO
7806-1983
Specification for designation of perforations in industrial plate screens
BS 6576:1985 Code of practice for installation of chemical damp-proof courses
BS 6604:1985 Code of practice for safe operation of starter batteries
BS 6651:1999 Code of practice for protection of structures against lightning
BS 6704:1996
Code of practice for selection, installation and maintenance of
intrinsically safe electrical equipment in coal mines
BS 6736:1986 Code of practice for hand signalling for use in agricultural operations
BS 6739:1986
Code of practice for instrumentation in process control systems:
installation design and practice
BS 6803-3:1990
Vehicle security alarm systems. Code of practice for the protection of
vehicles and goods in transit
BS 6805-3:1987, EN
27574-3:1988, ISO
7574-3:1985
Statistical methods for determining and verifying stated noise emission
values of machinery and equipment. Method for determining and
verifying st ated values for batches of machines using a simple
(transition) method
BS 6808-3:1989 Coordinate measuring machines. Code of practice
BS 6853:1999
Code of practice for fire precautions in the design and construction of
passenger carrying trains
BS 6867:1987
Code of practice for maintenance of electrical switchgear for voltages
above 36 kV
BS 6880-1:1988
Code of practice for low temperature hot water heating systems of output
greater than 45 kW. Fundamental and design considerations
Code of Practice
BS 6880-2:1988
greater than 45 kW. Selection of equipment
BS 6880-3:1988
greater than 45 kW. Installation, commissioning and maintenance
BS 6911-7:1992, ISO
9248:1992
Testing earth-moving machinery. Testing of earth-moving machinery.
Specification for units of measurement and tolerances
BS 6912-20:1996, ISO
10968:1995
Safety of earth-moving machinery. Specification for operator's controls
BS 6913-6:1991, ISO
9247:1990
Operation and maintenance of earth-moving machinery. Specification for
identification and marking of electrical wires and cables
BS 6915:2001
Design and construction of fully supported lead sheet roof and wall
coverings. Code of practice
BS 6916-9:1988, ISO
7915-1985
Chain saws. Specification for strength of handles
BS 6938:1988
Recommendations for documentation of the preparation of certified
reference materials for metallurgical analysis of non-ferrous metals
BS 7010:1988
Code of practice for a system of tolerances for the dimensions of plastics
mouldings
BS 7022:1988 Guide for geophysical logging of boreholes for hydrogeological purposes
BS 7074-3:1989
Application, selection and installation of expansion vessels and ancillary
equipment for sealed water systems. Code of practice for chilled and co
ndenser systems
BS 7102-1:1989, ISO
8731-1:1987
Recommendations for algorithms for use in banking message
authentication. Data Encryption Algorithm (DEA)
BS 7121-1:1989 Code of practice for safe use of cranes. General
BS 7121-11:1998 Code of practice for safe use of cranes. Offshore cranes
BS 7121-12:1999
Code of practice for safe use of cranes. Recovery vehicles and equipment.
Code of practice
BS 7121-2:2003
Code of practice for safe use of cranes. Inspection, testing and
examination
BS 7121-3:2000 Code of practice for safe use of cranes. Mobile cranes
BS 7121-4:1997 Code of practice for safe use of cranes. Lorry loaders
BS 7159:1989
Code of practice for design and construction of glass-reinforced plastics
(GRP) piping systems for individual plants or sites
BS 7212:1989 Code of practice for safe use of construction hoists
BS 7230:1989 Code of practice for article theft detection systems
BS 7236:1989
Code of practice for non-reclosable packaging for solid dose units of
medicinal products
BS 7255:2001 Code of practice for safe working on lifts
BS 7273-1:2000
Code of practice for the operation of fire protection measures. Electrical
actuation of gaseous total flooding extinguishing systems
Code of Practice
BS 7273-2:1992
Code of practice for the operation of fire protection measures. Mechanical
actuation of gaseous total flooding and local application extinguishing
systems
BS 7273-3:2000
actuation of pre-action sprinkler systems
BS 7300:1990
Code of practice for safeguarding of the hazard points on troughed belt
conveyors
BS 7335-1:1991
Installation of monolithic refractories. Code of practice for installation by
casting
BS 7335-2:1991
Installation of monolithic refractories. Code of practice for installation by
gunning
BS 7339:1990
Code of practice for supplementary checking of metallic materials of
construction in pressurized systems
BS 7354:1990 Code of practice for design of high-voltage open-terminal stations
BS 7361-1:1991 Cathodic protection. Code of practice for land and marine applications
BS 7375:1996
Code of practice for distribution of electricity on construction and
building sites
BS 7430:1998 Code of practice for earthing
BS 7460:1991
Code of practice for use of spray extraction machines on carpets and soft
floor coverings in hospitals
BS 7481:1992
Code of practice for testing venting systems and shields for lead-acid
starter batteries
BS 7524:1991 Code of practice for documentation for social alarm systems
BS 7544:1991, ISO
10112:1991
Method for graphical presentation of the complex modulus of damping
materials
BS 7570:2000 Code of practice for validation of arc welding equipment
BS 7572:1992 Code of practice for thermally insulated underground piping systems
BS 7582:2005 Code of practice for reconditioning of used safes
BS 7593:1992
Code of practice for treatment of water in domestic hot water central
heating systems
BS 7594:1993 Code of practice for audio-frequency induction-loop systems (AFILS)
BS 7608:1993 Code of practice for fatigue design and assessment of steel structures
BS 7609:1992
Code of practice for installation and inspection of uninsulated
compression and mechanical connectors for power cables with copper or
aluminium co nductors
BS 7645:1993, IEC
60757:1983
Code for designation of colours
BS 7754:1994 Code of practice for garment evaluation by wearer trials
BS 7771:1994 Code of practice for pasteurization of milk on farms and in small dairies
BS 7773:1995 Code of practice for cleaning and preparation of metal surfaces
Code of Practice
BS 7801:2004
Escalators and moving walks. Code of practice for safe working on
escalators and moving walks
BS 7807:1995
Code of practice for design, installation and servicing of integrated
systems incorporating fire detection and alarm systems and/or other
security systems for buildings other than dwellings
BS 7826-1:1995, IEC
60493-1:1974
Guide for the statistical analysis of ageing test data. Methods based on
mean values of normally distributed test results
BS 7827:1996
Code of practice for designing, specifying, maintaining and operating
emergency sound systems at sports venues
BS 7843-2.1:1996
Guide to the acquisition and management of meteorological precipitation
data. Field practices and data management. Technical aspects in the field
BS 7858:2004
Security screening of individuals employed in a security environment.
Code of practice
BS 7872:2002
Manned security services. Cash-in-transit services (collection and
delivery). Code of practice
BS 7873:1996
Code of practice for application and testing of hot enamel external and/or
internal coating of iron and steel pipes
BS 7880:1997
Code of practice for draught control of existing doors and windows in
housing using draughtstrips
BS 7885:1997 Code of practice for safe entry into silos
BS 7899-1:1997
Code of practice for assessment of hazard to life and health from fire.
General guidance
BS 7907:1997
Code of practice for the design and manufacture of children's clothing to
promote mechanical safety
BS 7939:1999
Smoke security devices. Code of practice for manufacture, installation
and maintenance
BS 7960:2005 Door supervisors. Code of practice
BS 7974:2001
Application of fire safety engineering principles to the design of
buildings. Code of practice
BS 7980:2003
Vehicle lifts. Installation, maintenance, thorough examination and safe
use. Code of practice
BS 7981:2002
Code of practice for the installation, maintenance, thorough examination
and safe use of mast climbing work platforms (MCWPs)
BS 7984:2001 Keyholding and response services. Code of practice
BS 7985:2002
Code of Practice for the use of rope access methods for industrial
purposes
BS 7988:2002
Code of practice for the use of information technology (IT) in the
delivery of assessments
BS 7992:2002 Code of practice for exterior deterrent systems
BS 8000-1:1989
Workmanship on building sites. Code of practice for excavation and
filling
Code of Practice
BS 8000-10:1995
Workmanship on building sites. Code of practice for plastering and
rendering
BS 8000-11.2:1990
Workmanship on building sites. Code of practice for wall and floor tiling.
Natural stone tiles
BS 8000-12:1989
Workmanship on building sites. Code of practice for decorative
wallcoverings and painting
BS 8000-13:1989
Workmanship on building sites. Code of practice for above ground
drainage and sanitary appliances
BS 8000-14:1989
Workmanship on building sites. Code of practice for below ground
drainage
BS 8000-15:1990
Workmanship on building sites. Code of practice for hot and cold water
services (domestic scale)
BS 8000-2.1:1990
Workmanship on building sites. Code of practice for concrete work.
Mixing and transporting concrete
BS 8000-3:2001 Workmanship on building sites. Code of practice for masonry
BS 8000-4:1989 Workmanship on building sites. Code of practice for waterproofing
BS 8000-5:1990
Workmanship on building sites. Code of practice for carpentry, joinery
and general fixings
BS 8000-6:1990
Workmanship on building sites. Code of practice for slating and tiling of
roofs and claddings
BS 8000-7:1990 Workmanship on building sites. Code of practice for glazing
BS 8000-8:1994
Workmanship on building sites. Code of practice for plasterboard
partitions and dry linings
BS 8000-9:2003
Workmanship on building sites. Cementitious levelling screeds and
wearing screeds. Code of practice
BS 8002:1994 Code of practice for earth retaining structures
BS 8004:1986 Code of practice for foundations
BS 8006:1995 Code of practice for strengthened/reinforced soils and other fills
BS 8007:1987
Code of practice for design of concrete structures for retaining aqueous
liquids
BS 8010-2.1:1987
Code of practice for pipelines. Pipelines on land: design, construction and
installation. Ductile iron
BS 8081:1989 Code of practice for ground anchorages
BS 8100-1:1986 Lattice towers and masts. Code of practice for loading
BS 8100-3:1999
Lattice towers and masts. Code of practice for strength assessment of
members of lattice towers and masts
BS 8100-4:1995 Lattice towers and masts. Code of practice for loading of guyed masts
BS 8102:1990 Code of practice for protection of structures against water from the
BS 8103-1:1995
Structural design of low-rise buildings. Code of practice for stability, site
investigation, foundations and ground floor slabs for housing
Code of Practice
BS 8103-2:1996
Structural design of low rise buildings. Code of practice for masonry
walls for housing
BS 8103-2:2005
walls for housing
BS 8103-3:1996
Structural design of low-rise buildings. Code of practice for timber floors
and roofs for housing
BS 8103-4:1995
Structural design of low-rise buildings. Code of practice for suspended
concrete floors for housing
BS 8104:1992 Code of practice for assessing exposure of walls to wind-driven rain
BS 8110-1:1997 Structural use of concrete. Code of practice for design and construction
BS 8110-2:1985 Structural use of concrete. Code of practice for special circumstances
BS 8118-1:1991 Structural use of aluminium. Code of practice for design
BS 8200:1985
Code of practice for design of non-loadbearing external vertical
enclosures of buildings
BS 8202-1:1995
Coatings for fire protection of building elements. Code of practice for the
selection and installation of sprayed mineral coatings
BS 8203:2001 Code of practice for installation of resilient floor coverings
BS 8204-2:2003
Screeds, bases and in-situ floorings. Concrete wearing surfaces. Code of
practice
BS 8204-4:2004
Screeds, bases and in-situ floorings. Cementitious terrazzo wearing
surfaces. Code of practice
BS 8204-5:2004
Screeds, bases and in-situ floorings. Mastic asphalt underlays and
wearing surfaces. Code of practice
BS 8204-7:2003
Screeds, bases and in-situ floorings. Pumpable self-smoothing screeds.
Code of practice
BS 8206-2:1992 Lighting for buildings. Code of practice for daylighting
BS 8207:1985 Code of practice for energy efficiency in buildings
BS 8211-1:1988
Energy efficiency in housing. Code of practice for energy efficient
refurbishment of housing
BS 8212:1995 Code of practice for dry lining and partitioning using gypsum
BS 8213-4:1990
Windows, doors and rooflights. Code of practice for the installation of
replacement windows and doorsets in dwellings
BS 8214:1990 Code of practice for fire door assemblies with non-metallic leaves
BS 8215:1991
Code of practice for design and installation of damp-proof courses in
masonry construction
BS 8217:2005 Reinforced bitumen membranes for roofing. Code of practice
BS 8218:1998 Code of practice for mastic asphalt roofing
BS 8219:2001
Installation of sheet roof and wall coverings. Profiled fibre cement. Code
of practice
BS 8221-1:2000
Code of practice for cleaning and surface repair of buildings. Cleaning of
natural stones, brick, terracotta and concrete
Code of Practice
BS 8221-2:2000
Code of practice for cleaning and surface repair of buildings. Surface
repair of natural stones, brick and terracotta
BS 8233:1999 Sound insulation and noise reduction for buildings. Code of practice
BS 8290-1:1991 Suspended ceilings. Code of practice for design
BS 8290-3:1991 Suspended ceilings. Code of practice for installation and maintenance
BS 8297:2000
Code of practice for Design and installation of non-loadbearing precast
concrete cladding
BS 8298:1994
Code of practice for design and installation of natural stone cladding and
lining
BS 8300:2001
Design of buildings and their approaches to meet the needs of disabled
people. Code of practice
BS 8313:1997 Code of practice for accommodation of building services in ducts
BS 8406:2003 Event stewarding and crowd safety services. Code of practice
BS 8409:2002 Soft indoor play areas. Code of practice
BS 8418:2003
Installation and remote monitoring of detector activated CCTV systems.
Code of practice
BS 8419-1:2005
Interoperability between metadata systems used for learning, education
and training. Code of practice for the development of application profiles
BS 8425:2003 Code of practice for installation of laminate floor coverings
BS 8426:2003 A code of practice for e-support in e-learning systems
BS 874-1:1986
Methods for determining thermal insulating properties. Introduction,
definitions and principles of measurement
BS 9251:2005
Sprinkler systems for residential and domestic occupancies. Code of
practice
BS AU 242a:1998 Automotive windscreen repair. Code of practice
BS AU 257:2002
Code of practice for remanufacture of spark and compression ignition
engines
BS AU 50-3.7:1985
Tyres and wheels. Valves. Code of practice for the selection and care of
tyre inflation valves for passenger cars (including caravans and light tr
ailers)
BS AU 50-3.8:1985
Tyres and wheels. Valves. Code of practice for the selection and care of
tyre inflation valves for commercial vehicles
BS CECC 00016:1991
Harmonized system of quality assessment for electronic components.
Basic specification: basic requirements for the use of statistical process
cont rol (SPC) in the CECC system
BS CECC 00108:1996
Rule of Procedure 8. Attestation of conformity. The CECC Mark and
conditions of use, certificates of approval and procedures for the
attestation o f conformity
BS CECC 299001:1999,
CECC 2990001:1999
Technology approval schedule. Manufacture of electrical connectors
Code of Practice
BS EN 100114-6:1997
CECC Quality assessment procedure for electronic components.
Technology approval of electronic component manufacturers
BS EN 1015-17:2000
Methods of test for mortar for masonry. Determination of water-soluble
chloride content of fresh mortars
BS EN 10208-2:1997
Steel pipes for pipelines for combustible fluids. Technical delivery
conditions. Pipes of requirement class B
BS EN 10211:1996
Chemical analysis of ferrous materials. Determination of titanium in steel
and iron. Flame atomic absorption spectrometric method
BS EN 10212:1996
Chemical analysis of ferrous materials. Determination of arsenic in steel
and iron. Spectrophotometric method
BS EN 1058:1996
Wood-based panels. Determination of characteristic values of mechanical
properties and density
BS EN 1097-1:1996
Tests for mechanical and physical properties of aggregates. Determination
of the resistance to wear (micro-Deval)
BS EN 1097-2:1998
Tests for mechanical and physical properties of aggregates. Methods for
the determination of resistance to fragmentation
BS EN 1097-3:1998
of loose bulk density and voids
BS EN 1097-9:1998
of the resistance to wear by abrasion from studded tyres. Nordic test
BS EN 12014-7:1998
Foodstuffs. Determination of nitrate and/or nitrite content. Continuous
flow method for the determination of nitrate content of vegetables and
veg etable products after cadmium reduction
BS EN 12063:1999 Execution of special geotechnical work. Sheet pile walls
BS EN 122150:1996
Sectional specification: radio frequency coaxial connectors. Series EIA
Flange
BS EN 12269-1:2000
Determination of the bond behaviour between reinforcing steel and
autoclaved aerated concrete by the "beam test". Short term test
BS EN 12332-1:1999
Rubber- or plastics-coated fabrics. Determination of bursting strength.
Steel ball method
BS EN 12393-1:1999
Non-fatty foods. Multiresidue methods for the gas chromatographic
determination of pesticide residues. General considerations
BS EN 12393-2:1999
determination of pesticide residues. Methods for extraction and clean-up
BS EN 12393-3:1999
determination of pesticide residues. Determination and confirmatory tests
BS EN 12490:1999
Durability of wood and wood-based products. Preservative-treated solid
wood. Determination of the penetration and retention of creosote in
treated wood
Code of Practice
BS EN 1295-1:1998
Structural design of buried pipelines under various conditions of loading.
General requirements
BS EN 1352:1997
Determination of static modulus of elasticity under compression of
autoclaved aerated concrete or lightweight aggregate concrete with open
structu re
BS EN 1367-2:1998
Tests for thermal and weathering properties of aggregates. Magnesium
sulfate test
BS EN 1367-3:2001
Tests for thermal and weathering properties of aggregates. Boiling test for
Sonnenbrand basalt
BS EN 13876:2002
Transport. Logistics and services. Goods transport chains. Code of
practice for the provision of cargo transport services
BS EN 14045:2003
Packaging. Evaluation of the disintegration of packaging materials in
practical oriented tests under defined composting conditions
BS EN 1655:1997 Copper and copper alloys. Declarations of conformity
BS EN 1738:1998
Determination of steel stresses in unloaded reinforced components made
of autoclaved aerated concrete
BS EN 1744-1:1998 Tests for chemical properties of aggregates. Chemical analysis
BS EN 1904:2000
Precious metals. The finenesses of solders used with precious metal
jewellery alloys
BS EN 1922:1998
Information technology. Character repertoire and coding for interworking
with Telex services
BS EN 1988-1:1998 Foodstuffs. Determination of sulfite. Optimized Monier-Williams method
BS EN 2032-2:1994 Metallic materials. Coding of metallurgical condition in delivery
BS EN 23326:1993,
ISO 3326:1993
Specification for hardmetals. Determination of (the magnetization)
coercivity
BS EN 2484:1989
Specification for microfilming of drawings. Aperture card for 35 mm
microfilm
BS EN 26591-2:1993
Packaging. Sacks. Description and method of measurement. Empty sacks
made from thermoplastic flexible film
BS EN 358:2000
Personal protective equipment for work positioning and prevention of
falls from a height. Belts for work positioning and restraint and work
positi oning lanyards
BS EN 50195:1997
Code of practice for the safe use of fully enclosed askarel-filled electrical
equipment
BS EN 50225:1997
Code of practice for the safe use of fully enclosed oil-filled electrical
equipment which may be contaminated with PCBs
BS EN 60034-6:1994,
IEC 60034-6:1991
Rotating electrical machines. Methods of cooling (IC Code)
BS EN 60034-7:1993,
IEC 60034-7:1992
Rotating electrical machines. Classification of types of constructions and
mounting arrangements (IM Code)
BS EN 60062:1994 Marking codes for resistors and capacitors
Code of Practice
BS EN 60249-2-
10:1994, IEC 60249-2-
10:1987
Specifications. Epoxide non-woven/woven glass reinforced copper-clad
laminated sheet of defined flammability (vertical burning test)
BS EN 60249-2-
14:1994, IEC 60249-2-
14:1988
Specifications. Phenolic cellulose paper copper-clad laminated sheet of
defined flammability (vertical burning test), economic quality
BS EN 60249-2-
15:1994, IEC 60249-2-
15:1987
Specifications. Flexible copper-clad polyimide film, of defined
flammability
BS EN 60249-2-
16:1993, IEC 60249-2-
16:1992
Specifications. Specification No. 16. Polyimide woven glass fabric copper-
clad laminated sheet of defined flammability (vertical burning test)
BS EN 60249-2-
18:1993, IEC 60249-2-
18:1992
Specifications. Specification No. 18. Bismaleimide/triazine modified
epoxide woven glass fabric copper-clad laminated sheet of defined
flammabilit y (vertical burning test)
BS EN 60249-2-3:1994,
IEC 60249-2-3:1987
Specifications. Metal-clad base materials for printed wiring boards.
Copper-clad base material. Specification for epoxide cellulose paper
copper-c lad laminated sheet of defined flammability (vertical burning
test)
BS EN 60249-2-9:1994,
IEC 60249-2-9:1987
Specifications. Epoxide cellulose paper core, epoxide glass cloth surfaces
copper-clad laminated sheet of defined flammability (vertical burning t
est)
BS EN 60268-7:1996,
BS 6840-7:1996, IEC
60268-7:1996
Sound system equipment. Headphones and earphones
BS EN 60433:1999,
IEC 60433:1998
Insulators for overhead lines with a nominal voltage above 1 kV. Ceramic
insulators with a.c. systems. Characteristics of insulator units of the l ong
rod type
BS EN 60529:1992 Specification for degrees of protection provided by enclosures (IP code)
BS EN 60567:1993,
IEC 60567:1992
Guide for the sampling of gases and of oil from oil-filled electrical
equipment and for the analysis of free and dissolved gases
BS EN 60660:2000,
IEC 60660:1999
Insulators. Tests on indoor post insulators of organic material for systems
with nominal voltages greater than 1 kV up to but not including 300 kV
BS EN 60684-2:1997,
IEC 60684-2:1997
Flexible insulating sleeving. Methods of test
BS EN 60917-2:1994
Modular order for the development of mechanical structures for electronic
equipment practices. Sectional specification. Interface co-ordination di
mensions for the 25 mm equipment practice
Code of Practice
BS EN 60917-2-1:1997,
IEC 60917-2-1:1993
mensions for the 25 mm equipment practice. Detail specification.
Dimensions for cabinets and racks
BS EN 60917-2-2:1997,
IEC 60917-2-2:1994
mensions for the 25 mm equipment practice. Detail specification.
Dimensions for subracks, chassis, backplanes, front panels and plug-in
units
BS EN 61069-7:1999,
IEC 61069-7:1999
Industrial-process measurement and control. Evaluation of system
properties for the purpose of system assessment. Assessment of system
safety
BS EN 61069-8:1999,
IEC 61069-8:1999
Industrial-process measurement and control. Evaluation of system
properties for the purpose of system assessment. Assessment of non-task
related s ystem properties
BS EN 61076-4-
102:1997, IEC 61076-4-
102:1997
Connectors with assessed quality, for use in d.c., low-frequency analogue
and in digital high speed data applications. Printed board connectors. D
etail specification for two-part single-pole connectors, for multiple uses
on plug-in units, with pre-centring, coding and early mating features,
having a metric grid in accordance with IEC 60917
BS EN 61194:1996 Characteristic parameters of stand-alone photovoltaic (PV) systems
BS EN 61198:1994,
IEC 61198:1993
Mineral insulating oils. Methods for the determination of 2-furfural and
related compounds
BS EN 61207-6:1994,
IEC 61207-6:1994
Expression of performance of gas analyzers. Photometric analyzers
BS EN 61327:1996,
IEC 61327:1995
Helical-scan digital composite video cassette recording system using
12,65 mm (0,5 in) magnetic tape. Format D-3
BS EN 61797-1:1997,
IEC 61797-1:1996
Transformers and inductors for use in telecommunication and electronic
equipment. Main dimensions of coil formers. Coil formers for laminated
core s
BS EN 62262:2002
Degrees of protection provided by enclosures for electrical equipment
against external mechanical impacts (IK code)
BS EN 637:1995, BS
2782-12:Method
1205A:1995
Plastics piping systems. Glass-reinforced plastics components.
Determination of the amounts of constituents using the gravimetric
method
BS EN 690:1995 Agricultural machinery. Manure spreaders. Safety
BS EN 752-4:1998
Drain and sewer systems outside buildings. Hydraulic design and
environmental considerations
BS EN 787:1994 Sacks for the transport of food aid. Sacks made of polyethylene film
BS EN 788:1994 Sacks for the transport of food aid. Tubular sacks made of composite film
BS EN 932-1:1997 Tests for general properties of aggregates. Methods for sampling
Code of Practice
BS EN 933-10:2001
Tests for geometrical properties of aggregates. Assessment of fines.
Grading of fillers (air-jet sieving)
BS EN 933-6:2001
Tests for geometrical properties of aggregates. Assessment of surface
characteristics. Flow coefficient of aggregates
BS EN 933-7:1998
Tests for geometrical properties of aggregates. Determination of shell
content. Percentage of shells in coarse aggregates
BS EN ISO 10087:1996 Small craft. Hull identification. Coding system
BS EN ISO 11426:1999
Determination of gold in gold jewellery alloys. Cupellation method (fire
assay)
BS EN ISO 14918:1998 Thermal spraying. Approval testing of thermal sprayers
BS EN ISO 15438:2003
Information technology. Automatic identification and data capture
techniques. Bar code symbology specifications. PDF417
BS EN ISO 2739:1998 Sintered metal bushes. Determination of radial crushing strength
BS EN ISO 4045:1998 Leather. Determination of pH
BS EN ISO 4048:1998 Leather. Determination of matter soluble in dichloromethane
BS EN ISO 4524-
6:1995
Metallic coatings. Test methods for electrodeposited gold and gold alloy
coatings. Determination of the presence of residual salts
BS EN ISO 5198:1999
Centrifugal, mixed flow and axial pumps. Code for hydraulic
performance tests. Precision class
BS EN ISO 5508:1995,
BS 684-2.35:1990
Animal and vegetable fats and oils. Analysis by gas chromatography of
methyl esters of fatty acids
BS EN ISO 6414:1995 Technical drawings for glassware
BS EN ISO 6817:1997
Measurement of conductive liquid flow in closed conduits. Method using
electromagnetic flowmeters
BS EN ISO 9167-
1:1995, BS 4289-9:1993
Rapeseed. Determination of glucosinolates content. Method using high-
performance liquid chromatography
BS EN ISO/IEC 11172-
1:1995
Information technology. Coding of moving pictures and associated audio
for digital storage media at up to about 1,5 Mbit/s. Systems
2:1995
for digital storage media at up to about 1,5 Mbit/s. Video
3:1995
for digital storage media at up to about 1,5 Mbit/s. Audio
4:1997
for digital storage media at up to about 1,5 Mbit/s. Compliance testing
BS G 244:1989
Code of practice for installation/repair of aircraft electrical
interconnection systems
BS G 257-1:1998
Design of electromagnetic hazard protection of civil aircraft. Guide to
theory and threats
BS G 257-2:1998
Design of electromagnetic hazard protection of civil aircraft. Guide to
protection
Code of Practice
BS IEC 60943:1998
Guidance concerning the permissible temperature rise for parts of
electrical equipment, in particular for terminals
BS ISO 10126-1:1991
Banking. Procedures for message encipherment (wholesale). General
principles
BS ISO 11438-1:1993
Ferronickel. Determination of trace-element content by electrothermal
atomic absorption spectrometric method. General requirements and
sample diss olution
BS ISO 11438-2:1993
atomic absorption spectrometric method. Determination of lead content
BS ISO 11438-3:1993
atomic absorption spectrometric method. Determination of antimony
content
BS ISO 11438-4:1993
atomic absorption spectrometric method. Determination of tin content
BS ISO 11438-5:1993
atomic absorption spectrometric method. Determination of tellurium
content
BS ISO 11438-6:1993
atomic absorption spectrometric method. Determination of thallium
content
BS ISO 11438-7:1993
atomic absorption spectrometric method. Determination of silver content
BS ISO 11438-8:1993
atomic absorption spectrometric method. Determination of indium content
BS ISO 15560:1998
Practice for characterization and performance of a high-dose radiation
dosimetry calibration laboratory
BS ISO 230-1:1996
Test code for machine tools. Geometric accuracy of machines operating
under no-load or finishing conditions
BS ISO 3166-2:1998
Codes for the representation of names of countries and their subdivisions.
Country subdivision code
BS ISO 3166-3:1999
Codes for the representation of names of countries and their subdivisions.
Code for formerly used names of countries
BS ISO 5426-2:1996
Information and documentation. Extension of the Latin alphabet coded
character set for bibliographic information interchange. Latin characters
use d in minor European languages and obsolete typography
BS ISO 5725-6:1994
Accuracy (trueness and precision) of measurement methods and results.
Use in practice of accuracy values
BS ISO 639-1:2002 Codes for the representation of the names of languages. Alpha-2 code
BS ISO 639-2:1998 Codes for the representation of the names of languages. Alpha-3 code
BS ISO 9282-1:1988
Information processing. Coded representation of pictures. Encoding
principles for picture representation in a 7-bit or 8-bit environment
Code of Practice
BS ISO TR 10064-
1:1992
Cylindrical gears. Code of inspection practice. Inspection of
corresponding flanks of gear teeth
BS ISO TR 10064-
3:1996
Cylindrical gears. Code of inspection practice. Recommendations relative
to gear blanks, shaft centre distance and parallelism of axes
BS ISO/IEC
10036:1996
Information technology. Font information interchange. Procedures for
registration of font-related identifiers
BS ISO/IEC
10367:1991
Information technology. Standardized coded graphic character sets for use
in 8-bit codes
BS ISO/IEC 10918-
1:1994
Information technology. Digital compression and coding of continuous-
tone still images. Requirements and guidelines
BS ISO/IEC
11558:1992
Information technology. Data compression for information interchange.
Adaptive coding with embedded dictionary. DCLZ Algorithm
BS ISO/IEC 13522-
4:1996
Information technology. Coding of multimedia and hypermedia
information. MHEG registration procedure
BS ISO/IEC 15938-
7:2003
Information technology. Multimedia content description interface.
Conformance testing
BS ISO/IEC
17799:2005, 7799-
1:2005
Information technology. Security techniques. Code of practice for
information security management
BS ISO/IEC 2022:1994
Information technology. Character code structure and extension
techniques
Information technology. ISO 8-bit code for information interchange.
Structure and rules for implementation
BS ISO/IEC 8632-
3:1999
Information technology. Computer graphics. Metafile for the storage and
transfer of picture description information. Binary encoding
BS ISO/IEC 8632-
4:1999
Information technology. Computer graphics. Metafile for the storage and
transfer of picture description information. Clear text encoding
BS ISO/IEC 8859-
13:1998
Information technology. 8-bit single-byte coded graphic character sets.
Latin alphabet No. 7
Information technology. Galvanic isolation of balanced interchange
circuits
Information technology. Security techniques. Data integrity mechanism
using a cryptographic check function employing a block cipher algorithm
BS MA 47:1977 Code of practice for ships' cargo blocks
BS MA 48:1976 Code of practice for design and operation of ships' derrick rigs
BS MA 93:1981 Code of practice for structural safety of deck machinery installation
BS QC 300400:1983,
IEC 60384-2:1982, QC
300400:1982
Fixed capacitors for use in electronic equipment. Sectional specification:
fixe d metallized polyethylene terephthalate film dielectric d.c. capacitors
Code of Practice
BS QC 301200:1983,
IEC 60384-16:1982, QC
301200:1982
Fixed capacitors for use in electronic equipment. Sectional specification:
fixe d metallized polypropylene film dielectric d.c. capacitors
GBM08-Fire,Accident&Crime preve
00/540663 DC
BS EN 12094-16. Fixed firefighting systems. Components for gas
extinguishing systems. Part 16. Requirements and test methods for
odorizing devices for CO low pressure systems
00/540664 DC
BS EN 12259-12. Fixed firefighting systems. Components for sprinkler
and water spray system. Part 12. Sprinkler pumps
00/541355 DC
and water spray system. Part 11. Medium and high velocity water
sprayers
00/541672 DC
BS EN 14043. Automatic turntable ladders for fire service use.
Requirements and test methods
00/541673 DC
BS EN 14044. Semi-automatic turntable ladders for fire service use.
01/208798 DC
IEC 60695-5-3 TS. Fire hazard testing. Part 5-3. Corrosion damage
effects of fire effluent. Leakage current and metal loss test method
01/716091 DC
ISO 4126-4.3. Safety devices for protection against excessive pressure.
Part 4: Pilot-operated safety valves
02/208126 DC IEC 60849. Ed.3. Sound systems for emergency purposes
02/540010 DC
BS EN 13501-3. Fire classification of construction products and building
elements. Classification using data from fire resistance tests systems an d
services
02/540011 DC
EN 13501-5. Fire classification of construction products and building
elements. Part 5. Classification using data from external fire exposure to r
oof test
02/540033 DC BS EN 14339. Underground fire hydrants, surface boxes and covers
02/540339 DC BS EN 14384. Pillar fire hydrants
02/540596 DC
prEN 54-17. Fire detection and fire alarm systems. Part 17: Short circuit
isolators
02/540953 DC
prEN 14586. Specification for landing valves for dry riser and other dry
main systems for fire fighting in buildings
02/705333 DC
BS EN 14432. Tanks for the transport of dangerous goods. Tank
equipment for the transport of liquid chemicals. Product discharge and air
inlet val ves
02/705334 DC
equipment for the transport of liquid chemicals. Footvalves
02/708661 DC
equipment for the transport of liquid chemicals. Hinged manhole cover
and neckrings
03/104200 DC
BS xxxx. Determination of the resistance to jet-fires of passive fire
protection materials
03/106843 DC
ISO 7240-6. Fire detection and alarm systems. Part 6: Point-type fire
detectors for detection of carbon monoxide
03/106844 DC
ISO 7240-11. Fire detection and alarm systems. Part 11: Manual call
points
25 158
03/112565 DC
ISO 6182-9. Fire protection. Automatic sprinkler system. Part 9.
Requirements and test methods for water mist nozzles
03/114128 DC
EN 14756. Determination of the limiting oxygen concentration (LOC) for
gases and vapours
03/114763 DC
EN 54-18. Fire detection and fire alarm systems. Part 18. Requirements
and test methods for input/output devices for use on the transmission
paths of fire detection and fire alarm systems
03/115041 DC ISO/DIS 17431. Fire test. Reduced-scale model box test
03/115046 DC
BS EN 1366-4. Fire resistance tests for service installations. Part 4.
Linear joint seals
03/115061 DC
ISO 3008. Fire resistance tests. Test method for fire resistance of doors
and shutters
03/317997 DC
ISO/DIS 6182-10. Fire protection. Automatic sprinkler systems. Part 10.
Requirements and test methods for domestic sprinklers
04/19969165 DC,
2004/19969165 DC
and water spray systems. Part 9. Deluge alarm valve assemblies
04/19970076 DC
ISO 6182-13. Fire protection. Automatic sprinkler systems. Requirements
and test methods for extended coverage sprinklers
04/19970079 DC,
2004/19970079 DC
BS ISO 6182-12. Fire protection. Automatic sprinkler systems.
Requirements and test methods for grooved end pipe couplings
04/19991935 DC,
2004/19991935 DC
BS EN 1634-2. Fire resistance tests for door and shutter assemblies. Part
2. Fire door hardware. Building hardware for fire resisting doorsets and
openable windows
04/30068987 DC,
2004/30068987 DC
ISO/DIS 19702. Analysis of fire gases using Fourier infra-red technique
(FTIR)
04/30069011 DC,
2004/30069011 DC
ISO/DIS 19703. Generation and analysis of toxic gases in fire.
Calculation of species yields, equivalence ratios and combustion
efficiency in expe rimental fires
04/30080013 DC,
2004/30080013 DC
EN 50131-1. Alarm systems. Intrusion systems. Part 1. System
requirements
04/30090250 DC,
2004/30090250 DC
BS ISO 14934-2. Reaction to fire tests. Calibration and use of heat flux
meters. Part 2. Primary calibration methods
04/30090253 DC,
2004/30090253 DC
BS ISO 14934-3. Fire tests. Calibration and use of heat flux meters. Part
3. Secondary calibration method
04/30097971 DC,
2004/30097971 DC
ISO/DIS 13344. Determination of the lethal toxic potency of fire
effluents
04/30103157 DC,
2004/30103157 DC
extinguishing systems. Part 8. Requirements and test methods for flexible
connectors
04/30103162 DC,
2004/30103162 DC
EN 12094-5. Fixed firefighting systems. Components for gas
extinguishing systems. Part 5. Requirements and test methods for high
and low pressure selector valves and their actuators
26 158
04/30103167 DC,
2004/30103167 DC
extinguishing systems. Part 6. Requirements and test methods for non-
electrical disa ble devices for CO2 systems
04/30104415 DC Fire detection and fire alarm systems. Part 20. Aspirating smoke
04/30105620 DC,
2004/30105620 DC
EN 54-21. Fire detection and fire alarm systems. Part 21. Alarm
transmission and fault warning routing equipment
04/30107486 DC,
2004/30107486 DC
BS 8414-2. Fire performance of external cladding systems. Part 2. Test
method for non-loadbearing cladding systems fixed to and supported by a
str uctural steel frame
04/30109632 DC,
2004/30109632 DC
BS EN 54-16. Fire detection and fire alarm systems. Components for fire
alarm voice alarm systems. Part 16. Voice alarm control and indicating
equ ipment
04/30109635 DC,
2004/30109635 DC
BS EN 54-23. Fire detection and fire alarm systems. Part 23. Fire alarm
devices. Visual alarms
04/30112209 DC,
2004/30112209 DC
ISO/IEC 14520-1. Gaseous fire-extinguishing systems. Physical
properties and system design. Part 1. General requirements
04/30112212 DC,
2004/30112212 DC
properties and system design. Part 2. CF3 Extinguishant
04/30112215 DC,
2004/30112215 DC
properties and system design. Part 5. FK-5-1-12 Extinguishant
04/30112220 DC,
2004/30112220 DC
properties and system design. Part 6. HCFC Blend A Extinguishant
04/30112223 DC,
2004/30112223 DC
properties and system design. Part 8. HCFC 125 Extinguishant
04/30112228 DC,
2004/30112228 DC
properties and system design. Part 9. HFC 227ea Extinguishant
04/30112231 DC,
2004/30112231 DC
properties and system design. Part 10. HFC 23 Extinguishant
04/30112234 DC,
2004/30112234 DC
properties and system design. Part 11. HFC 236fa Extinguishant
04/30112237 DC,
2004/30112237 DC
properties and system design. Part 12. IG-01 Extinguishant
04/30112242 DC,
2004/30112242 DC
04/30112253 DC,
2004/30112253 DC
04/30112258 DC,
2004/30112258 DC
04/30112263 DC,
2004/30112263 DC
prEN ISO 4126-3. Safety devices for protection against excessive
pressure. Part 3. Safety valves and bursting disc safety devices in
combination
04/30113142 DC,
2004/30113142 DC
ISO 6182-2. Fire protection. Automatic sprinkler systems. Part 2.
Requirements and test methods for wet alarm valves, retard chambers
and water mo tor alarms
27 158
04/30113145 DC,
2004/30113145 DC
Requirements and test methods for dry pipe valves
04/30113148 DC,
2004/30113148 DC
Requirements and test methods for deluge valves
04/30113151 DC,
2004/30113151 DC
Requirements and test methods for check valves
04/30113154 DC,
2004/30113154 DC
Requirements and test methods for pre-action dry alarm valves
04/30115467 DC,
2004/30115467 DC
ISO 7240-13. Fire detection and alarm systems. Part 13. Compatibility
assessment of system components
04/30115471 DC,
2004/30115471 DC
ISO 7240-21. Fire detection and alarm systems. Part 21. Routing
equipment
04/30115626 DC,
2004/30115626 DC
ISO 3941. Classification of fires
04/30116255 DC,
2004/30116255 DC
IEC 60695-1-12. Fire hazard testing. Part 1-12. Guidance for assessing
the fire hazard of electrotechnical products. Fire safety engineering
04/30116812 DC,
2004/30116812 DC
EN 15004-1. Fixed firefighting systems. Gas extinguishing systems. Part
1. General requirements for planning and installation
04/30116834 DC,
2004/30116834 DC
prEN 14383-1. Prevention of crime. Urban planning and building design.
Part 1. Definition of specific terms
04/30119106 DC,
2004/30119106 DC
EN 14972. Fixed firefighting systems. Watermist systems. Design and
installation
04/30122860 DC,
2004/30122860 DC
ISO 7240-22. Fire detection and fire alarm equipment. Part 22. Duct
sampling equipment
04/30123285 DC,
2004/30123285 DC
BS 1991-1-2. Actions on structures. Part 1-2. General actions on
structures exposed to fire
04/30124343 DC,
2004/30124343 DC
EN 13562-2. Fixed firefighting systems. Foam systems. Part 2. Design,
construction and maintenance
04/30124505 DC,
2004/30124505 DC
EN 15080-8. Extended application of results from fire resistance tests.
Part 8. Beams
04/30124508 DC,
2004/30124508 DC
Part 12. Penetration seals
04/30124512 DC,
2004/30124512 DC
EN 1366-9. Fire resistance tests for service installations. Part 9. Single
compartment smoke extraction ducts
04/30124515 DC,
2004/30124515 DC
EN 1366-10. Fire resistance tests for service installations. Part 10. Smoke
control dampers
05/19971310 DC
EN 13501-4. Fire classification of construction products and building
elements. Part 4. Classification using data from fire resistance tests on co
mponents of smoke control systems
05/30090262 DC ISO 5658-2. Reaction to fire tests. Part 2. Spread of flame
05/30099635 DC
EN 1143-1. Secure storage units. Part 1. Safes, strongrooms and
strongroom doors
05/30103133 DC
BS EN 15276. Fixed firefighting systems. Condensed aerosol
extinguishing systems. Part 2. Design, installation and maintenance
28 158
05/30103142 DC
BS EN 15276. Fixed firefighting systems. Condensed aerosol
extinguishing systems. Part 1. Requirements and test methods for
components
05/30117311 DC
EN 54-25. Fire detection and fire alarm systems. Part 25. Components
using radio links and system requirements
05/30126083 DC
EN 1568-1. Fire extinguishing media. Foam concentrates. Part 1.
Specification for medium expansion foam concentrates for surface
application to wa ter-immiscible liquids
05/30126088 DC
Specification for high expansion foam concentrates for surface
application to wate r-immiscible liquids
05/30126092 DC
Specification for low expansion foam concentrates for surface application
to water -immiscible liquids
05/30126095 DC
Specification for low expansion foam concentrates for surface application
to water -miscible liquids
05/30127973 DC
ISO 7240-1. Fire detection and alarm systems. Part 1. General and
definitions
05/30127975 DC
ISO 7240-12. Fire detection and alarm systems. Part 12. Line type smoke
detectors using a transmitting light beam
05/30134009 DC
Non-loadbearing walls. Part 1. General
05/30135750 DC
ISO 7240-10. Fire detection and alarm systems. Part 10. Point-type flame
detectors
89/40170 DC Components for sprinkler systems. Part 4. Specification for alarm bells
89/40172 DC Components for sprinkler systems. Part 6. Specification for pipe
89/40173 DC Components for sprinkler systems. Part 7. Specification for pipe hangers
89/40174 DC
Components for sprinkler systems. Part 8. Specification for pressure
switches
89/40175 DC
Components for sprinkler systems. Part 9. Specification for deluge alarm
valve assemblies
91/37066 DC
ISO/DIS 10085. prEN 30085. Fire fighting vehicles and other equipment.
Symbols for operator controls and other displays
92/39221 DC
Specification for fire detection and alarm systems for buildings. Part 7.
Flame detectors for special risks (BS 5839:Part 7)
93/205200 DC
IEC Publication 695-8-1. Guidance document on the test methods used
for the determination of the heat release rate associated with the
electrotech nical products involved with fires. Part 1. General guidance
[IEC Document 89(Secretariat)80]
93/205211 DC
Revision of ISO/IEC Guide 52. Fire tests. Terminology [IEC Committee
Draft 89(Secretariat)83]
93/312504 DC
prEN 1188-6. Fire resistance test on loadbearing elements. Part 6.
Method of test for fire resistance of columns
29 158
93/314456 DC
prEN 1365-5. Fire resistance tests on loadbearing elements in buildings.
Part 5. Beams
94/408831 DC
Draft British standard for fire protection equipment. Portable fire
extinguishers. Performance and construction (ISO 7165)
95/540367 DC
ISO/DIS 11925-3. Reaction to fire tests. Ignitability of building products
subjected to direct impingement of flame under zero impressed irradianc
e. Part 3. Multi-source test
95/541691 DC Fire detection and alarm systems. Point heat detectors.(ISO/DIS 7240-5)
95/541692 DC
Fire detection and alarm systems. Smoke point detectors using scattered
light, transmitted light or ionization. (ISO/DIS 7240-7)
95/541995 DC
Specification for fire protection equipment. Self-contained smoke alarms
(prEN ISO 12239)
95/542303 DC
Smoke control systems. Part 1. Specifications for smoke curtains.
Requirements and test methods (EN 12101-1)
96/205832 DC
IEC 695-6-31.Part 6. Guidance and test methods for the assessment of
obscuration hazard of smoke from electrotechnical products involved in
fires. Section 31. Application to materials used in electrotechnical
products
96/540129 DC Specification for suction hoses for firefighting purposes (prEN ISO
96/540970 DC Maintenance for portable fire extinguishers. (EN 12367)
96/542173 DC
Fire detection and alarm systems. Specification for system requirements
(prEN 54-13)
96/543674 DC Fire hazard analysis. Life threat components of fire (ISO CD 13571)
96/714099 DC
Safety devices for protection against excessive pressure. Part 2. Bursting
disc safety devices (ISO/DIS 4126-2:1996)
98/540920 DC
prEN ISO 14520-5. ISO/DIS 14520-5. Gaseous fire extinguishing
systems. Physical properties and system design. Part 5. FC-5-1-14
extinguishant
98/541918 DC
prEN 1366. Fire resistance tests for service installations. Part 4. Linear
joint seals
99/240634 DC
IEC 60695-7-50 ED 1.0. Fire hazard testing. Part 7-50. Toxicity of fire
effluent. Estimation of toxic potency. Apparatus and test method (IEC
DOCU MENT 89/334/CD)
99/240635 DC
IEC 60695-7-51 ED 1.0. Fire hazard testing. Part 7-51. Toxicity of fire
effluent. Estimation of toxic potency. Calculation and interpretation of t
est results (IEC DOCUMENT 89/335/CD)
99/540206 DC
EN 12259-9. Fixed firefighting systems. Components for sprinkler and
water spray systems. Part 9. Deluge valves
99/540207 DC
EN 12259-10. Fixed firefighting systems. Components for sprinkler and
water spray systems. Part 10. Multiple controls
99/540550 DC
ISO/DIS 5660-1. Reaction to fire tests. Heat release, smoke production
and mass loss rate. Heat release rate (cone calorimeter method)
99/540559 DC
ISO/DIS 5658-4. Reaction to fire tests. Spread of flame. Intermediate
scale test of vertical spread of flame with vertically oriented specimen
30 158
99/540578 DC
ISO/DIS 5660-2. Reaction to fire tests. Heat release, smoke production
and mass loss rate from building products. Part 2. Smoke production rate
(d ynamic measurement)
99/702646 DC
EN 50131-5-3. Alarm systems. Intrusion systems. Part 5-3. Requirements
for intrusion alarm equipment using radio frequency techniques (prEN
50131- 5-3)
99/703461 DC
BS EN 50131-2-2. Alarm systems. Intrusion systems. Part 2-2.
Requirements for passive infrared detectors
99/715383 DC
BS EN 50131-4. Alarm systems. Intrusion systems. Part 4. Warning
devices
BIP 2003:2003
Fire Extinguishing Systems. A guide to the types, application and
considerations
BIP 2004:2003 Fire Safety in Care Homes for Older People and Children
BIP 2007:2003 Basic Guide to Fire Engineering
BIP 2009:2003
Fire Detection and Alarm Systems. A guide to the BS Code, BS 5839-1
:2002
BIP 2044:2004 A Guide to BS 5839-6:2004
BIP 2047:2005 Winning with Fire Safety. A Guide for Business
BIP 2064:2004 Building Regulations 2000. Approved Document B
BS 1635:1990
Recommendations for graphic symbols and abbreviations for fire
protection drawings
BS 2782-1:Method
140D:1997
Methods of testing plastics. Thermal properties. Flammability of a test
piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory
metho d)
BS 2915:1990 Specification for bursting discs and bursting disc devices
BS 2957:1958 Specification for fireman's axe with ash handle
BS 3054:1959 Specification for fireman's axe with rubber insulated handle
BS 3127:1979 Specification for ferrous and non-ferrous Bourdon tubing
BS 3165:1986
Specification for rubber and plastics suction hoses and hose assemblies
for fire-fighting purposes
BS 3169:1986 Specification for first aid reel hoses for fire-fighting purposes
BS 3251:1976
Specification. Indicator plates for fire hydrants and emergency water
supplies
BS 336:1989 Specification for fire hose couplings and ancillary equipment
BS 3367:1999
Specification for ropes and lines for fire service use other than for rope
rescue purposes
BS 3566:1982 Specification for lightweight salvage sheets for fire service use
BS 4422:2005 Fire. Vocabulary
BS 4737-3.0:1988
Intruder alarm systems. Specifications for components. General
requirements
BS 4737-3.1:1977 Intruder alarm systems. Specifications for components. Continuous
BS 4737-3.10:1978 Intruder alarm systems. Specifications for components. Vibration
BS 4737-3.11:1978
Intruder alarm systems. Specifications for components. Rigid printed-
circuit wiring
31 158
BS 4737-3.12:1978
Intruder alarm systems. Specifications for components. Beam interruption
detectors
BS 4737-3.13:1978
Intruder alarm systems. Specifications for components. Capacitive
proximity detectors
BS 4737-3.14:1986
Intruder alarm systems. Specifications for components. Specification for
deliberately-operated devices
BS 4737-3.2:1977 Intruder alarm systems. Specifications for components. Foil on glass
BS 4737-3.3:1977 Intruder alarm systems. Specifications for components. Protective
BS 4737-3.30:1986
Intruder alarm systems. Specifications for components. Specification for
PVC insulated cables for interconnecting wiring
BS 4737-3.4:1978
Intruder alarm systems. Specifications for components. Radiowave
Doppler detectors
BS 4737-3.5:1978
Intruder alarm systems. Specifications for components. Ultrasonic
movement detectors
BS 4737-3.6:1978 Intruder alarm systems. Specifications for components. Acoustic
BS 4737-3.7:1978
Intruder alarm systems. Specifications for components. Passive infra-red
detectors
BS 4737-3.8:1978
Intruder alarm systems. Specifications for components. Volumetric
capacitive detectors
BS 4737-3.9:1978 Intruder alarm systems. Specifications for components. Pressure mats
BS 4737-4.3:1988
Intruder alarm systems in buildings. Codes of practice. Code of practice
for exterior alarm systems
BS 476-10:1983
Fire tests on building materials and structures. Guide to the principles
and application of fire testing
BS 476-11:1982
Fire tests on building materials and structures. Method for assessing the
heat emission from building materials
BS 476-12:1991
Fire tests on building materials and structures. Method of test for
ignitability of products by direct flame impingement
BS 476-13:1987, ISO
5657:1986
Fire tests on building materials and structures. Method of measuring the
ignitability of products subjected to thermal irradiance
BS 476-15:1993, ISO
5660-1:1993
Fire tests on building materials and structures. Method for measuring the
rate of heat release of products
BS 476-20:1987
Fire tests on building materials and structures. Method for determination
of the fire resistance of elements of construction (general principles)
BS 476-21:1987
Fire tests on building materials and structures. Methods for determination
of the fire resistance of loadbearing elements of construction
BS 476-22:1987
of the fire resistance of non-loadbearing elements of construction
BS 476-23:1987
of the contribution of components to the fire resistance of a structure
BS 476-24:1987, ISO
6944:1985
Fire tests on building materials and structures. Method for determination
of the fire resistance of ventilation ducts
BS 476-3:2004
Fire tests on building materials and structures. Classification and method
of test for external fire exposure to roofs
32 158
BS 476-31.1:1983
Fire tests on building materials and structures. Methods for measuring
smoke penetration through doorsets and shutter assemblies. Method of
measur ement under ambient temperature conditions
BS 476-32:1989
Fire tests on building materials and structures. Guide to full scale fire
tests within buildings
BS 476-33:1993, ISO
9705:1993
Fire tests on building materials and structures. Full-scale room test for
surface products
BS 476-4:1970
Fire tests on building materials and structures. Non-combustibility test
for materials
BS 476-6:1989
Fire tests on building materials and structures. Method of test for fire
propagation for products
BS 476-7:1997
Fire tests on building materials and structures. Method of test to
determine the classification of the surface spread of flame of products
BS 5041-1:1987
Fire hydrant systems equipment. Specification for landing valves for wet
risers
BS 5041-2:1987
Fire hydrant systems equipment. Specification for landing valves for dry
risers
BS 5041-3:1975
Fire hydrant systems equipment. Specification for inlet breechings for
dry riser inlets
BS 5041-4:1975
Fire hydrant systems equipment. Specification for boxes for landing
valves for dry risers
BS 5041-5:1974
Fire hydrant systems equipment. Specification for boxes for foam inlets
and dry riser inlets
BS 5306-0:1986
Fire extinguishing installations and equipment on premises. Guide for the
selection of installed systems and other fire equipment
BS 5306-1:1976
Fire extinguishing installations and equipment on premises. Hydrant
systems, hose reels and foam inlets
BS 5306-2:1990
Fire extinguishing installations and equipment on premises. Specification
for sprinkler systems
BS 5306-3:2003
Fire extinguishing installations and equipment on premises. Code of
practice for the inspection and maintenance of portable fire extinguishers
BS 5306-4:2001
for carbon dioxide systems
BS 5306-5.1:1992
premises. Halon systems. Specification for halon 1301 total flooding
system s
BS 5306-5.2:1984
premises. Halon systems. Halon 1211 total flooding systems
BS 5306-6.1:1988
Fire extinguishing installations and equipment on premises. Foam
systems. Specification for low expansion foam systems
BS 5306-6.2:1989
Fire extinguishing installations and equipment on premises. Foam
systems. Specification for medium and high expansion foam systems
BS 5306-7:1988
for powder systems
33 158
BS 5306-8:2000
Fire extinguishing installations and equipment on premises. Selection and
installation of portable fire extinguishers. Code of practice
BS 5357:1995 Code of practice for installation of security glazing
BS 5446-2:2003
Fire detection and fire alarm devices for dwellings. Specification for heat
alarms
BS 5499-6:2002
Graphical symbols and signs. Safety signs, including fire safety signs.
Creation and design of graphical symbols for use in safety signs.
Requirem ents
BS 5588-0:1996
Fire precautions in the design, construction and use of buildings. Guide
to fire safety codes of practice for particular premises/applications
BS 5588-12:2004
Fire precautions in the design, construction and use of buildings.
Managing fire safety
BS 5588-5:2004
Fire precautions in the design, construction and use of buildings. Access
and facilities for fire-fighting
BS 5839-1:2002
Fire detection and alarm systems for buildings. Code of practice for
system design, installation, commissioning and maintenance
BS 5839-3:1988
Fire detection and alarm systems for buildings. Specification for
automatic release mechanisms for certain fire protection equipment
BS 5839-5:1988
Fire detection and alarm systems for buildings. Specification for optical
beam smoke detectors
BS 5839-6:2004
design, installation and maintenance of fire detection and fire alarm sys
tems in dwellings
BS 5839-8:1998
design, installation and servicing of voice alarm systems
BS 5839-9:2003
design, installation, commissioning and maintenance of emergency voice
co mmunication systems
BS 5979:2000
Code of practice for remote centres receiving signals from security
systems
BS 6165:2002 Specification for small disposable fire extinguishers of the aerosol type
BS 6203:2003
Guide to fire characteristics and fire performance of expanded
polystyrene materials (EPS and XPS) used in building applications
BS 6336:1998
Guide to the development of fire tests, the presentation of test data and
the role of tests in hazard assessment
BS 6391:1983
Specification for non-percolating layflat delivery hoses and hose
assemblies for fire fighting purposes
BS 6401:1983
Method for measurement, in the laboratory, of the specific optical density
of smoke generated by materials
BS 6458-2.3:1985, IEC
60695-2-3:1984
Fire hazard testing for electrotechnical products. Test methods. Bad-
connection test with heaters
BS 6643-1:1985
Recharging fire extinguishers (manufactured to BS 5423 'Specification
for portable fire extinguishers'). Specification for procedure and materials
34 158
BS 6853:1999
Code of practice for fire precautions in the design and construction of
passenger carrying trains
BS 7230:1989 Code of practice for article theft detection systems
BS 7244:1990 Specification for flame arresters for general use
BS 7273-1:2000
actuation of gaseous total flooding extinguishing systems
BS 7273-2:1992
Code of practice for the operation of fire protection measures.
Mechanical actuation of gaseous total flooding and local application
extinguishing systems
BS 7273-3:2000
actuation of pre-action sprinkler systems
BS 7327-1:1990
Small fixed fire extinguishers. Specification for small fixed halon fire
extinguishers
BS 7346-2:1990
Components for smoke and heat control systems. Specification for
powered smoke and heat exhaust ventilators
BS 7346-3:1990
Components for smoke and heat control systems. Specification for smoke
curtains
BS 7346-4:2003
Components for smoke and heat control systems. Functional
recommendations and calculation methods for smoke and heat exhaust
ventilation systems, employing steady-state design fires. Code of practice
BS 7346-5:2005
Components for smoke and heat control systems. Functional
recommendations and calculation methods for smoke and heat exhaust
ventilation systems, employing time-dependent design fires. Code of
practice
BS 7369:1991
Specification for multi-frequency tone signalling protocol for social
alarm systems
BS 7499:2002 Static site guarding and mobile patrol services. Code of practice
BS 750:1984
Specification for underground fire hydrants and surface box frames and
covers
BS 7524:1991 Code of practice for documentation for social alarm systems
BS 7582:2005 Code of practice for reconditioning of used safes
BS 7807:1995
Code of practice for design, installation and servicing of integrated
systems incorporating fire detection and alarm systems and/or other
security systems for buildings other than dwellings
BS 7833:1995 Specification for firefighters' axes with glass fibre shafts
BS 7858:2004
Security screening of individuals employed in a security environment.
Code of practice
BS 7899-1:1997
General guidance
BS 7899-2:1999
Guidance on methods for the quantification of hazards to life and health
a nd estimation of time to incapacitation and death in fires
BS 7904:1998
Guide to smoke measurement units. Their basis and use in smoke opacity
test methods
35 158
BS 7927:1998
Heating appliances for domestic applications. Portable apparatus
designed to detect and measure specific combustion flue gas products.
Requirement s
BS 7937:2000
Specification for portable fire extinguishers for use on cooking oil fires
(class F)
BS 7939:1999
Smoke security devices. Code of practice for manufacture, installation
and maintenance
BS 7984:2001 Keyholding and response services. Code of practice
BS 7990:2003
Tube furnace method for the determination of toxic product yields in fire
effluents
BS 7992:2002 Code of practice for exterior deterrent systems
BS 8202-1:1995
selection and installation of sprayed mineral coatings
BS 8202-2:1992
use of intumescent coating systems to metallic substrates for providin g
fire resistance
BS 8214:1990 Code of practice for fire door assemblies with non-metallic leaves
BS 8220-1:2000 Guide for security of buildings against crime. Dwellings
BS 8220-2:1995 Guide for security of buildings against crime. Offices and shops
BS 8220-3:2004
Guide for security of buildings against crime. Storage, industrial and
distribution premises
BS 8414-1:2002
Fire performance of external cladding systems. Test methods for non-
loadbearing external cladding systems applied to the face of a building
BS 8423:2002 Fireguards for fires and heating appliances for domestic use.
BS 8436:2004
Electric cables. 300/500 V screened electric cables having low emission
of smoke and corrosive gases when affected by fire, for use in walls, part
itions and building voids. Multicore cables
BS 9251:2005
Sprinkler systems for residential and domestic occupancies. Code of
practice
BS EN 1028-1:2002
Fire-fighting pumps. Fire-fighting centrifugal pumps with primer.
Classification. General and safety requirements
BS EN 1028-2:2002
Fire-fighting pumps. Fire-fighting centrifugal pumps with primer.
Verification of general and safety requirements
BS EN 1047-2:2000
Secure storage units. Classification and methods of test for resistance to
fire. Data rooms and data containers
BS EN 1143-1:1997
Secure storage units. Requirements, classification and methods of test for
resistance to burglary. Safes, strongroom doors and strongrooms
BS EN 1143-2:2001
resistance to burglary. Deposit systems
BS EN 12094-1:2003
Fixed firefighting systems. Components for gas extinguishing systems.
Requirements and test methods for electrical automatic control and delay
dev ices
BS EN 12094-10:2003
Requirements and test methods for pressure gauges and pressure switches
36 158
BS EN 12094-11:2003
Requirements and test methods for mechanical weighing devices
BS EN 12094-12:2003
Requirements and test methods for pneumatic alarm devices
BS EN 12094-13:2001
Requirements and test methods for check valves and non-return valves
BS EN 12094-16:2003
Requirements and test methods for odorizing devices for CO low
pressure s ystems
BS EN 12094-2:2003
Requirements and test methods for non-electrical automatic control and
delay devices
BS EN 12094-3:2003
Requirements and test methods for manual triggering and stop devices
BS EN 12094-4:2004
Requirements and test methods for container valve assemblies and their
actua tors
BS EN 12094-5:2001
Requirements and test methods for high and low pressure selector valves
and their actuators for CO2 systems
BS EN 12094-6:2001
Requirements and test methods for non-electrical disable devices for CO2
sys tems
BS EN 12094-7:2001
Requirements and test methods for nozzles for CO2 systems
BS EN 12094-8:1998
Requirements and test methods for flexible connectors for CO systems
BS EN 12094-9:2003
Requirements and test methods for special fire detectors
BS EN 12101-2:2003
Smoke and heat control systems. Specification for natural smoke and
heat exhaust ventilators
BS EN 12101-3:2002
Smoke and heat control systems. Specification for powered smoke and
heat exhaust ventilators
BS EN 12101-6:2005
Smoke and heat control systems. Specification for pressure differential
systems. Kits
BS EN 12259-1:1999
Fixed firefighting systems. Components for sprinkler and water spray
systems. Sprinklers
BS EN 12259-2:1999
systems. Wet alarm valve assemblies
BS EN 12259-3:2000
systems. Dry alarm valve assemblies
BS EN 12259-4:2000
systems. Water motor alarms
37 158
BS EN 12259-5:2002
systems. Water flow detectors
BS EN 12285-1:2003
Workshop fabricated steel tanks. Horizontal cylindrical single skin and
double skin tanks for the underground storage of flammable and non-
flammab le water polluting liquids
BS EN 12416-1:2001
Fixed firefighting systems. Powder systems. Requiremments and test
methods for components
BS EN 12416-2:2001
Fixed firefighting systems. Powder systems. Design, construction and
maintenance
BS EN 125:1991
Specification for flame supervision devices for gas-burning appliances.
Thermo-electric types
BS EN 12561-2:2002
Railway applications. Tank wagons. Bottom emptying devices for liquid
products including vapour return
BS EN 12561-3:2002
Railway applications. Tank wagons. Bottom filling and emptying devices
for gases liquefied under pressure
BS EN 12561-4:2002
Railway applications. Tank wagons. Top devices for top emptying and
filling of liquid products
BS EN 12561-5:2002
Railway applications. Tank wagons. Top devices for bottom emptying
and top filling of liquid products
BS EN 12561-6:2002 Railway applications. Tank wagons. Manholes
BS EN 12798:1999
Transport quality system. Road, rail and inland navigation transport.
Quality system requirements to supplement BS EN ISO 9002 for the
transport o f dangerous goods with regard to safety
BS EN 12845:2004
Fixed firefighting systems. Automatic sprinkler systems. Design,
installation and maintenance
BS EN 12874:2001 Flame arresters. Performance requirements, test methods and limits for
BS EN 12882:2002
Conveyor belts for general purpose use. Electrical and flammability
safety requirements
BS EN 1300:2004
Secure storage units. Classification for high security locks according to
their resistance to unauthorized opening
BS EN 13238:2001
Reaction to fire tests for building products. Conditioning procedures and
general rules for selection of substrates
BS EN 13308:2002
Tanks for transport of dangerous goods. Service equipment for tanks.
Non pressure balanced footvalve
BS EN 13316:2002
Pressure balanced footvalve
BS EN 13317:2002
Manhole cover assembly
BS EN 13463-1:2001
Non-electrical equipment for potentially explosive atmospheres. Basic
method and requirements
BS EN 13463-5:2003
Non-electrical equipment for potentially explosive atmospheres.
Protection by constructional safety 'c'
BS EN 13501-1:2002
Fire classification of construction products and building elements.
Classification using test data from reaction to fire tests
38 158
BS EN 13501-2:2003
Fire classification of construction products and building elements.
Classification using data from fire resistance tests, excluding ventilation
se rvices
BS EN 13565-1:2003
Fixed firefighting systems. Foam systems. Requirements and test
methods for components
BS EN 1363-1:1999 Fire resistance tests. General requirements
BS EN 1363-2:1999 Fire resistance tests. Alternative and additional procedures
BS EN 1364-1:1999 Fire resistance tests for non-loadbearing elements. Walls
BS EN 1364-2:1999 Fire resistance tests for non-loadbearing elements. Ceilings
BS EN 1365-1:1999 Fire resistance tests for loadbearing elements. Walls
BS EN 1365-2:2000 Fire resistance tests for loadbearing elements. Floors and roofs
BS EN 1365-3:2000 Fire resistance tests for loadbearing elements. Beams
BS EN 1365-4:1999 Fire resistance tests for loadbearing elements. Columns
BS EN 1365-5:2004 Fire resistance tests for loadbearing elements. Balconies and walkways
BS EN 1365-6:2004 Fire resistance tests for loadbearing elements. Stairs
BS EN 1366-1:1999
Fire resistance tests for service installations. Fire resistance tests for
service installations. Ducts
BS EN 1366-2:1999 Fire resistance tests for service installations. Fire dampers
BS EN 1366-3:2004 Fire resistance tests for service installations. Penetration seals
BS EN 1366-5:2003 Fire resistance tests for service installations. Service ducts and shafts
BS EN 1366-6:2004
Fire resistance tests for service installations. Raised access and hollow
core floors
BS EN 1366-7:2004
Fire resistance tests for service installations. Conveyor systems and their
closures
BS EN 1366-8:2004 Fire resistance tests for service installations. Smoke extraction ducts
BS EN 13821:2002
Potentially explosive atmospheres. Explosion prevention and protection.
Determination of minimum ignition energy of dust/air mixtures
BS EN 13823:2002
Reaction to fire tests for building products. Building products excluding
floorings exposed to the thermal attack by a single burning item
BS EN 14034-4:2004
Determination of explosion characteristics of dust clouds. Determination
of the limiting oxygen concentration LOC of dust clouds
BS EN 14135:2004 Coverings. Determination of fire protection ability
BS EN 14326:2003
Leather. Physical and mechanical tests. Determination of resistance to
horizontal spread of flame
BS EN 14450:2005
resistance to burglary. Secure safe cabinets
BS EN 14466:2005
Fire fighting pumps. Portable pumps. Safety and performance
requirements, tests
BS EN 14470-1:2004 Fire safety storage cabinets. Safety storage cabinets for flammable liquids
BS EN 14710-1:2005
Fire-fighting pumps. Fire-fighting centrifugal pumps without primer.
Classification, general and safety requirements
BS EN 14710-2:2005
Fire-fighting pumps. Fire-fighting centrifugal pumps without primer.
Verification of general and safety requirements
39 158
BS EN 1568-1:2000
Fire extinguishing media. Foam concentrates. Specification for medium
expansion foam concentrates for surface application to water-immiscible
liqu ids
BS EN 1568-3:2000
Fire extinguishing media. Foam concentrates. Specification for low
expansion foam concentrates for surface application to water-immiscible
liquids
BS EN 1568-4:2000
Fire extinguishing media. Foam concentrates. Specification for low
expansion foam concentrates for surface application to water-miscible
liquids
BS EN 1634-1:2000
Fire resistance tests for door and shutter assemblies. Fire doors and
shutters
BS EN 1634-3:2004
Fire resistance tests for door and shutter assemblies. Smoke control doors
and shutters
BS EN 1777:2004
Hydraulic platforms (HPs) for fire fighting and rescue services. Safety
requirements and testing
BS EN 1846-1:1998 Firefighting and rescue service vehicles. Nomenclature and designation
BS EN 1846-2:2001
Firefighting and rescue service vehicles. Common requirements. Safety
and performance
BS EN 1846-3:2002
Firefighting and rescue service vehicles. Permanently installed
equipment. Safety and performance
BS EN 1866:1999 Mobile fire extinguishers
BS EN 1947:2002
Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for
pumps and vehicles
BS EN 1996-1-2:2005
Eurocode 6. Design of masonry structures. General rules. Structural fire
design
BS EN 2:1992 Classification of fires
BS EN 25923:1994, BS
6535-1:1990, ISO
5923:1989
Fire extinguishing media. Carbon dioxide
BS EN 27201-1:1994,
ISO 7201-1:1989
Fire protection. Fire extinguishing media. Halogenated hydrocarbons.
Specifications for halon 1211 and halon 1301
BS EN 27201-2:1994,
ISO 7201-2:1991
Fire protection. Fire extinguishing media. Halogenated hydrocarbons.
Code of practice for safe handling and transfer procedures
BS EN 3-3:1996
Portable fire extinguishers. Construction, resistance to pressure,
mechanical tests
BS EN 3475-407:2002
Aerospace series. Cables, electrical, aircraft use. Test methods.
Flammability
BS EN 357:2004
Glass in building. Fire resistant glazed elements with transparent or
translucent glass products. Classification of fire resistance
BS EN 3-6:1996
Portable fire extinguishers. Provisions for the attestation of conformity of
portable fire extinguishers in accordance with EN 3 Part 1 to Part 5
BS EN 3-7:2004
Portable fire extinguishers. Characteristics, performance requirements
and test methods
40 158
BS EN 45544-1:2000
Workplace atmospheres. Electrical apparatus used for the direct detection
and direct concentration measurement of toxic gases and vapours.
General requirements and test methods
BS EN 45544-2:2000
Perform ance requirements for apparatus used for measuring
concentrations in the region of limit values
BS EN 45544-3:2000
Perform ance requirements for apparatus used for measuring
concentrations well above limit values
BS EN 45544-4:2000
and direct concentration measurement of toxic gases and vapours. Guide
f or selection, installation, use and maintenance
BS EN 50130-5:1999 Alarm systems. Environmental test methods
BS EN 50131-6:1998 Alarm systems. Intrusion systems. Power supplies
BS EN 50133-1:1997
Alarm systems. Access control systems for use in security applications.
System requirements
BS EN 50133-2-1:2000
General requirements for components
BS EN 50133-7:1999
Application guidelines
BS EN 50134-1:2002 Alarm systems. Social alarm systems. System requirements
BS EN 50134-2:2000 Alarm systems. Social alarm systems. Trigger devices
BS EN 50134-3:2001 Alarm systems. Social alarm systems. Local unit and controller
BS EN 50134-5:2004
Alarm systems. Social alarm systems. Interconnections and
communications
BS EN 50136-1-1:1998
Alarm systems. Alarm transmission systems and equipment. General
requirements for alarm transmission systems
BS EN 50136-1-2:1998
Alarm systems. Alarm transmission systems and equipment.
Requirements for systems using dedicated alarm paths
BS EN 50136-1-4:1998
Requirements for systems with voice communicators using the public
switched telephone net work
BS EN 50136-2-1:1998
Alarm systems. Alarm transmission systems and equipment. General
requirements for alarm transmission equipment
BS EN 50136-2-2:1998
Requirements for equipment used in systems using dedicated alarm paths
BS EN 50241-1:1999
Specification for open path apparatus for the detection of combustible or
toxic gases and vapours. General requirements and test methods
BS EN 50362:2003
Method of test for resistance to fire of larger unprotected power and
control cables for use in emergency circuits
BS EN 54-1:1996 Fire detection and fire alarm systems. Introduction
BS EN 54-10:2002 Fire detection and fire alarm systems. Flame detectors. Point detectors
41 158
BS EN 54-11:2001 Fire detection and fire alarm systems. Manual call points
BS EN 54-12:2002
Fire detection and fire alarm systems. Smoke detectors. Line detectors
using an optical light beam
BS EN 54-2:1998 Fire detection and fire alarm systems. Control and indicating equipment
BS EN 54-3:2001 Fire detection and fire alarm systems. Fire alarm devices. Sounders
BS EN 54-4:1998 Fire detection and fire alarm systems. Power supply equipment
BS EN 54-5:2001 Fire detection and fire alarm systems. Heat detectors. Point detectors
BS EN 54-7:2001
Fire detection and fire alarm systems. Smoke detectors. Point detectors
using scattered light, transmitted light or ionization
BS EN 60695-10- Fire hazard testing. Abnormal heat. Mould stress relief distortion test
BS EN 60695-1-1:2000,
IEC 60695-1-1:1999
Fire hazard testing. Guidance for assessing fire hazard of electrotechnical
products. General guidelines
BS EN 60695-11-
2:2003
Fire hazard testing. Test flames. Apparatus, confirmatory test
arrangement and guidance
BS EN 60695-11-
5:2005
Fire hazard testing. Test flames. Needle-flame test method. Apparatus,
confirmatory test arrangement and guidance
BS EN 60695-7-1:2004
Fire hazard testing. Guidance on the minimization of toxic hazards due to
fires involving electrotechnical products. Toxicity of fire effluent. Ge
neral guidance
BS EN 60849:1998,
IEC 60849:1998
Sound systems for emergency purposes
BS EN 671-1:2001 Fixed fire fighting systems. Hose systems. Hose reels with semi-rigid
BS EN 671-2:2001 Fixed fire fighting systems. Hose systems. Hose systems with lay-flat
BS EN 671-3:2000
Fixed fire fighting systems. Hose systems. Maintenance of hose reels
with semi-rigid hose and hose systems with lay-flat hose
BS EN 694:2001 Fire-fighting hoses. Semi-rigid hoses for fixed systems
BS EN 81-28:2003
Safety rules for the construction and installation of lifts. Remote alarm on
passenger and goods passenger lifts
BS EN 981:1997
Safety machinery. System of auditory and visual danger and information
signals
BS EN ISO 1182:2002 Reaction to fire tests for building products. Non-combustibility test
BS EN ISO 11925-
2:2002
Reaction to fire tests. Ignitability of building products subjected to direct
impingement of flame. Single-flame source test
BS EN ISO 14557:2002
Fire-fighting hoses. Rubber and plastics suction hoses and hose
assemblies
BS EN ISO 16104:2003 Packaging. Transport packaging for dangerous goods. Test methods
BS EN ISO 1716:2002
Reaction to fire tests for building products. Determination of the heat of
combustion
BS EN ISO 340:2004
Conveyor belts. Laboratory scale flammability characteristics.
Requirements and test method
BS EN ISO 4589- Plastics. Determination of burning behaviour by oxygen index. Guidance
BS EN ISO 9094-
1:2003
Small craft. Fire protection. Craft with a hull length of up to and
including 15 m
42 158
BS IEC/TS 60695-8-
2:2001
Fire hazard testing. Heat release. Summary and relevance of test methods
BS ISO 10294-1:1996 Fire-resistance tests. Fire dampers for air distribution systems. Test
BS ISO 10294-2:1999
Fire-resistance tests. Fire dampers for air distribution systems.
Classification, criteria and field of application of test results
BS ISO 10294-3:1999
Fire-resistance tests. Fire dampers for air distribution systems. Guidance
on the test method
BS ISO 10840:2003 Plastics. Guidance for the use of standard fire tests
BS ISO 11925-3:1997
impingement of flame. Multi-source test
BS ISO 12472:2003
Fire resistance of timber door assemblies. Method of determining the
efficacy of intumescent seals
BS ISO 13344:1996 Determination of the lethal toxic potency of fire effluents
BS ISO 13475-1:1999
Acoustics. Stationary audible warning devices used outdoors. Field
measurements for determination of sound emission quantities
BS ISO 14520-1:2000
Gaseous fire-extinguishing systems. Physical properties and system
design. General requirements
BS ISO 14520-10:2000
design. HFC 23 extinguishant
BS ISO 14520-11:2000
design. HFC 236fa extinguishant
BS ISO 14520-12:2000
design. IG-01 extinguishant
BS ISO 14520-13:2000
BS ISO 14520-14:2000
BS ISO 14520-15:2000
BS ISO 14520-2:2000
design. CFDOWN3I extinguishant
BS ISO 14520-3:2000
design. FC-2-1-8 extinguishant
BS ISO 14520-4:2000
design. FC-3-1-10 extinguishant
BS ISO 14520-6:2000
design. HCFC Blend A extinguishant
BS ISO 14520-7:2000
design. HCFC Blend 124 extinguishant
BS ISO 14520-8:2000
design. HCFC 125 extinguishant
BS ISO 14520-9:2000
design. HFC 227ea extinguishant
43 158
BS ISO 17631:2002
Ships and marine technology. Shipboard plans for fire protection, life-
saving appliances and means of escape
BS ISO 3009:2003 Fire resistance tests. Elements of building construction. Glazed elements
BS ISO 5658-2:1996
Reaction to fire tests. Spread of flame. Lateral spread on building
products in vertical configuration
BS ISO 5658-4:2001
Reaction to fire tests. Spread of flame. Intermediate-scale test of vertical
spread of flame with vertically oriented specimen
BS ISO 7240-15:2004 Fire detection and alarm systems. Multisensor fire detectors
BS ISO TR 11925-
1:1999
impingement of flame. Guidance on ignitability
BS ISO TR 5658- Reaction to fire tests. Spread of flame. Guidance on flame spread
BS ISO TR 9122-
2:1990
Toxicity testing of fire effluents. Guidelines for biological assays to
determine the acute inhalation toxicity of fire effluents (basic principle s,
criteria and methodology
BS ISO/TR 11696-
1:1999
Uses of reaction to fire test results. Application of test results to predict
fire performance of internal linings and other building products
BS ISO/TR 12470:1998 Fire resistance tests. Guidance on the application and extension of results
BS ISO/TR 13387-
1:1999
Fire safety engineering. Application of fire performance concepts to
design objectives
BS ISO/TR 13387-
2:1999
Fire safety engineering. Design fire scenarios and design fires
BS ISO/TR 13387-
3:1999
Fire safety engineering. Assessment and verification of mathematical fire
models
BS ISO/TR 13387-
4:1999
Fire safety engineering. Initiation and development of fire and generation
of fire effluents
BS ISO/TR 13387-
5:1999
Fire safety engineering. Movement of fire effluents
BS ISO/TR 13387-
6:1999
Fire safety engineering. Structural response and fire spread beyond the
enclosure of origin
BS ISO/TR 13387-
7:1999
Fire safety engineering. Detection, activation and suppression
BS ISO/TR 13387-
8:1999
Fire safety engineering. Life safety. Occupant behaviour, location and
condition
BS ISO/TR 14696:1999
Reaction to fire tests. Determination of fire parameters of materials,
products and assemblies using an intermediate scale heat release
calorimete r (ICAL)
BS ISO/TR 14697:1997 Fire tests. Guidance on the choice of substrates for building products
BS ISO/TR 5659-
3:1999
Plastics. Smoke generation. Determination of optical density by a
dynamic flow method
DD 180:1989 Guide for the assessment of toxic hazards in fire in buildings and
DD 243:2004
Installation and configuration of intruder alarm systems designed to
generate confirmed alarm conditions. Code of practice
DD 245:2002 Code of practice for management of false alarms
44 158
DD 252:2002
Components for residential sprinkler systems. Specification and test
methods for residential sprinklers
DD 254:2001
Crime reduction measures for holiday resorts and accomodation.
Guidance and recommendations
DD 9999:2005
Code of practice for fire safety in the design, construction and use of
buildings
DD CEN/TS 54-
14:2004
Fire detection and fire alarm systems. Guidelines for planning, design,
installation, commissioning, use and maintenance
DD CLC/TS 50131-2-
2:2004
Alarm systems. Intrusion systems. Requirements for passive infrared
detectors
DD CLC/TS 50131-2-
3:2004
Alarm systems. Intrusion systems. Requirements for microwave detectors
DD CLC/TS 50131-2-
4:2004
Alarm systems. Intrusion systems. Requirements for combined passive
infrared and microwave detectors
DD CLC/TS 50131-2-
5:2004
Alarm systems. Intrusion systems. Requirements for combined passive
infrared and ultrasonic detectors
DD CLC/TS 50131-2-
6:2004
Alarm systems. Intrusion systems. Requirements for opening contacts
(magnetic)
DD CLC/TS 50131-
3:2003
Alarm systems. Intrusion systems. Control and indicating equipment
DD CLC/TS 50131-
7:2003
Alarm systems. Intrusion systems. Application guidelines
DD CLC/TS 50134-
7:2003
Alarm systems. Social alarm systems. Application guidelines
DD CLC/TS 50136-
4:2004
Annunciation equipment used in alarm receiving centres. Annunciation
equipment used in al arm receiving centres
DD CLC/TS
50398:2002
Alarm systems. Combined and integrated alarm systems. General
requirements
DD CLC/TS 61482-
1:2003
Live working. Flame-resistant materials for clothing for thermal
protection of workers. Thermal hazards of an electric arc. Test methods
DD ENV 1317-4:2002
Road restraint systems. Performance classes, impact test acceptance
criteria and test methods for terminals and transitions of safety barriers
DD ENV 1363-3:2000 Fire resistance tests. Verification of furnace performance
DD ENV 60695-2-
4/2:1996, IEC 60695-2-
4/2:1994
Fire hazard testing. Test methods. 500 W nominal test flames and
guidance
DD IEC TS 60695-11-
40:2002
Fire hazard testing. Test flames. Confirmatory tests. Guidance
DD IEC TS 60695-7-
3:2004
Fire hazard testing. Toxicity of fire effluent. Use and interpretation of
test results
HB 10176:1999
The IFSA Code. Sealing apertures and service penetrations to maintain
fire resistance
HB 10199:2001 Fire Precautions. A guide for management
45 158
KIT 105 Gaseous fire-extinguishing set
KIT 114 Crime prevention pack
KIT 126 Components for sprinkler and water spray systems
KIT 139 Design of fire detection installations for dwellings kit
KIT 140
PD 7974 series and BS 7974. Fire safety engineering principles for the
design of buildings
KIT 141
PD 7974 series. Fire safety engineering principles for the design of
buildings
KIT 144 Fire classification, testing and fire safety vocabulary kit
KIT 29 Fire safety engineering set
KIT 7 Fire detection and alarm pack
KIT 98 Fire classification and testing pack
PAS 020:1997 Specification for audible personal attack alarms
PAS 41:2003 Directional sounders. Requirements and tests
PAS 47:2003
Electric security fences. Design, installation and maintenance.
Specification
PAS 49:2002 Security consultancy. Code of practice
PAS 79:2005 Fire risk assessment. Guidance and a recommended methodology
PD 6503-1:1990,
ISO/TR 9122-1:1989
Toxicity of combustion products. General
PD 6503-2:1988
Toxicity of combustion products. Guide to the relevance of small-scale
tests for measuring the toxicity of combustion products of materials and
co mposites
PD 6504:1983 Medical information on human reaction to skin contact with hot surfaces
PD 6516:1987 Guide to guarding fires and heating appliances
PD 6520:1988
Guide to fire test methods for building materials and elements of
construction
PD 6531:1997 Queries and interpretations on BS 5839:Parts 1 and 4 (as amended)
PD 6608:1998,
CENELEC Report R079-
001:1998
Guide to achieving compliance with EC directives for alarm systems
PD 6662:2004
Scheme for the application of European Standards for intruder and hold-
up alarm systems
PD 7974-4:2003
buildings. Detection of fire and activation of fire protection systems.
(Sub-sy stem 4)
PD 7974-6:2004
buildings. Human factors. Life safety strategies. Occupant evacuation,
behaviou r and condition (Sub-system 6)
PD CEN/TR
14568:2003
EN 54. Fire detection and fire alarm systems. Interpretation of specific
clauses of EN 54-2:1997
PD CEN/TR
14715:2004
Safety of machinery. Ionizing radiation emitted by machinery. Guidance
for the application of technical standards in the design of machinery in or
der to comply with legislative requirements
46 158
PD CEN/TR 14819-
1:2004
Safety recommendations for cableway installations designed to carry
persons. Prevention and fight against fire. Funicular railways in tunnels
PD CEN/TR
14922:2004
Portable fire extinguishers. Model laboratory. Report in compliance with
EN 3-7
PD CR 13934:2001 Interpretation document of EN 3 Portable fire extinguishers
47 158
GBM10-Testing
01/713016 DC
ISO/CD 17475. Corrosion of metals and alloys. Electrochemical test
methods. Guidelines for conducting potentiostatic and potentiodynamic
polarisat ion measurements
01/713017 DC
ISO/CD 9227. Corrosion tests in artificial atmospheres. Salt spray tests
(revised)
01/714098 DC
ISO 16750-1. Road vehicles. Environmental conditions and testing for
electrical and electronic equipment. Part 1: General
01/714406 DC
ISO/DIS 16750-3. Road vehicles. Environmental conditions and testing
for electrical and electronic equipment. Part 3: Mechanical loads
01/714407 DC
for electrical and electronic equipment. Part 4: Climatic loads
01/714408 DC
for electrical and electronic equipment. Part 5: Chemical loads
01/715982 DC
ISO/CD 11844-2. Corrosion of metals and alloys. Classification of low
corrosivity of indoor atmospheres. Part 2: Determination of corrosion
attack in indoor atmospheres
01/715983 DC
ISO/CD 11844-3. Corrosion of metals and alloys. Classification of low
corrosivity of indoor atmospheres. Part 3: Measurement of environmental
para meters affecting indoor corrosivity
02/203692 DC
IEC 61010-3-045 TR. Safety requirements for electrical equipment for
measurement, control, and laboratory use. Part 3-045: Conformity
verification report for IEC 61010-2-045 (2000). Particular requirements
for washer disinfectors used in medical, pharmaceutical, veterinary and
laboratory fields
02/205147 DC
IEC 61010-3-031 TR. Ed.1. Safety requirements for electrical equipment
for measurement, control, and laboratory use. Part 3-031: Conformity
verifi cation report for IEC 61010-031:2000. Safety requirements for
hand-held probe assemblies for electrical test and measurement
02/205196 DC
IEC/TR 61010-3-081. Safety requirements for electrical equipment for
verification report for IEC 61010-2-081:2001 / EN 61010-2-081: 2001.
Safety requirements for electrical equipment for measurement, control,
and laboratory use. Part 2- 081: Particular requirements for automatic and
semi-automatic laboratory equipment for analysis and other purposes
02/205197 DC
IEC/TR 61010-3-1. Ed.2. Safety requirements for electrical equipment
for measurement, control, and laboratory use. Part 3-1: Conformity
verificati on report for IEC 61010-1:2001. Safety requirements for
electrical equipment for measurement, control, and laboratory use. Part 1:
48 158
GBM10-Testing
02/205198 DC
IEC/TR 61010-3-101. Safety requirements for electrical equipment for
verification report for IEC 61010-2-101: 2001. Safety requirements for
electrical equipment for measurement, control, and laboratory use. Part 2-
101: Particular requir ements for in vitro diagnostic (IVD) medical
equipment
02/205609 DC
IEC 61010-3. Ed.2. Safety requirements for electrical equipment for
measurement, control, and laboratory use. Part 3: Protocol for the
preparation of conformity verification reports for the IEC 61010 2nd
edition series
02/206610 DC
IEC 61010-2-040. Ed.1. Safety requirements for electrical equipment for
measurement, control and laboratory use. Part 2-040: Particular
requiremen ts for sterilizers and washer-disinfectors used to treat medical
materials
02/210375 DC
IEC 60068-2-80. Ed.1. Environmental testing. Part 2: Test methods. Test
F(?). Mixed mode testing
02/707208 DC
ISO/DIS 8568. Mechanical shock. Testing machines. Characteristics and
performance
02/712400 DC
BS EN 14584. Non-destructive testing. Acoustic emission. Examination
of metallic pressure equipment during proof testing. Planar location of
AE so urces
03/100554 DC
High Voltage Test Techniques. Part 3. Definitions and requirements for
on-site tests
03/115226 DC
EN 14784-1. Non-destructive testing. Industrial computed radiography
with phosphor imaging plates. Part 1. Classification of systems
03/308276 DC
IEC 60068-2-10. ED 6. Environmental testing. Part 2-10. Tests. Test J
and Guidance. Mould growth
03/310363 DC
IEC 60068-2-5. Ed.2.0. Environmental testing. Part 2-5. Tests. Test Sa.
Simulated solar radiation at ground level and guidance for solar radiation
testing
03/311404 DC
measurement, control, and laboratory use. Part 1. General requirements
03/311405 DC
IEC 61010-2-030. Ed.1.0. Safety requirements for electrical equipment
for measurement, control, and laboratory use. Part 30. Special
requirements for testing and measuring circuits
03/316249 DC
IEC 61196-1-203 ED.1. Coaxial communication cables. Part 1-203.
Environmental test methods. Test for water penetration of cable
03/316250 DC
IEC 61196-1-314 ED.1. Coaxial communication cables. Part 1-314.
Mechanical test methods. Test for bending
04/19973037 DC,
2004/19973037 DC
BS EN 1330-11. Non-destructive testing. Terminology. Part 11. X-ray
diffraction from polycrystalline and amorphous materials
04/30098945 DC,
2004/30098945 DC
EN ISO 3452-2. Non-destructive testing. Penetrant testing. Part 2.
Testing of penetrant materials
49 158
GBM10-Testing
04/30110124 DC,
2004/30110124 DC
IEC 60068-3-11 ED.1. Environmental testing. Uncertainties of humidity
and temperature testing
05/30131259 DC
IEC 60060-1 ED 3. High voltage test techniques. Part 1. General
definitions and test requirements
05/30133273 DC
IEC 60068-2-82. Environmental testing. Part 2-82. Test. Test Tx.
Whisker test methods for electronic and electric components
05/30133278 DC
IEC 62137-1-1. Surface mount technology. Environmental and endurance
test methods for surface mount solder joint. Part 1-1. Pull strength test
05/30135475 DC
IEC 62321. Procedures for the determination of levels of regulated
substances in electrotechnical products
96/211436 DC
IEC 721-3-0. Classification of environmental conditions. Part 3.
Classification of groups of environmental parameters and their severities.
Sectio n 0. Introduction and guide (International Document 75/295/CD)
96/216421 DC
IEC Publication 721-3-10. Classification of environmental conditions.
Part 3. Classification of groups of environmental parameters and their
sever ities. Section 10. Stationary and portable use in mines
97/203154 DC
IEC 721-3-3. Classification of environmental conditions. Part 3.
Classification of groups of environmental parameters and their severities.
Statio nary use at weatherprotected locations (IEC Document 75/300/CD)
97/703020 DC Apparatus for industrial gamma radiography. Design and test criteria
98/231548 DC
IEC 61010-3-032. Safety requirements for electrical equipment for
measurement, control and laboratory use. Part 3-032. Conformity
verification rep ort for IEC 61010-2-032 (IEC document 66/192/CDV)
98/716648 DC
Apparatus for industrial gamma radiography. Self-propelled intratubular
apparatus (pipeline crawler). Specifications for performance, design and t
ests (CD 3999:Part 2)
99/245062 DC
IEC 60068-3-5. Ed.1. Environmental testing. Part 3-5. Supporting
documentation and guidance. Confirmation of the performance of
temperature chambe rs (IEC Document 104/144/CDV)
99/245063 DC
IEC 60068-3-6. Environmental testing. Part 3-6. Supporting
documentation and guidance. Confirmation of the performance of
temperature/humidity cha mbers (IEC Document 104/145/CDV)
BS 10175:2001 Investigation of potentially contaminated sites. Code of practice
BS 2011:Part 2.2Z/AFc
and Z/BFc:1986, IEC
60068-2-53:1984
Environmental testing. Guidance. Tests Z/AFc and Z/BFc. Guidance on
combined temperature (cold and dry heat) and vibration (sinusoidal) tests
BS 2011-2.1Fda:1973
Environmental testing. Tests. Test Fda. Random vibration - wide band
reproducibility high
BS 2011-2.1J:1989, IEC
60068-2-10:1988
Environmental testing. Tests. Test J and guidance. Mould growth
BS 2011-2.1T:1981,
IEC 60068-2-20:1979
Environmental testing. Tests. Test T. Soldering
BS 2011-2.1Ta:1989,
IEC 60068-2-54:1985
Environmental testing. Tests. Test Ta. Soldering. Solderability testing by
the wetting balance method
50 158
GBM10-Testing
BS 2011-2.1Td:1990,
IEC 60068-2-58:1989
Environmental testing. Tests. Test Td. Solderability, resistance to
dissolution of metallization and to soldering heat of surface mounting
devices (SMD)
BS 2011-2.2Kd:1984,
IEC 60068-2-46:1982
Environmental testing. Guidance. Test Kd. Guidance on Test Kd:
Hydrogen sulphide test for contacts and connections
BS 2011-5.1:1991, IEC
60068-5-1:1991
Environmental testing. Guide to drafting of test methods. General
principles
BS 5650:1978, ISO
3999-1977
Specification for apparatus for gamma radiography
BS 6140-2:1982, ISO
6070-1981
Test equipment for generating vibration. Methods of describing
characteristics of auxiliary tables for test equipment for generating
vibration
BS 6647:1985, IEC
60790:1984
Guide to oscilloscopes and peak voltmeters for impulse tests
BS 6888:1988 Methods for calibration of bonded electrical resistance strain gauges
BS 7347:1990, ISO
8568:1989
Guide for characteristics and performance of mechanical shock testing
machines
BS 7479:1991, ISO
9227:1990
Method for salt spray corrosion tests in artificial atmospheres
BS 7502:1989, EN
45002:1989
General criteria for the assessment of testing laboratories
BS 7527-2.1:1991, IEC
60721-2-1:1982
Classification of environmental conditions. Environmental conditions
appearing in nature. Temperature and humidity
BS 7527-2.2:1991, IEC
60721-2-2:1988
appearing in nature. Precipitation and wind
BS 7527-2.3:1991, IEC
60721-2-3:1987
appearing in nature. Air pressure
BS 7527-2.4:1991, IEC
60721-2-4:1987
appearing in nature. Solar radiation and temperature
BS 7527-2.5:1991, IEC
60721-2-5:1991
appearing in nature. Dust, sand, salt mist
BS 7527-2.6:1991, IEC
60721-2-6:1990
appearing in nature. Earthquake vibration and shock
BS 7527-2.7:1991, IEC
60721-2-7:1987
appearing in nature. Fauna and flora
BS 7976-1:2002 Pendulum testers. Specification
BS 7976-2:2002 Pendulum testers. Method of operation
BS 7976-3:2002 Pendulum testers. Method of calibration
BS 8422:2003 Force measurement. Strain gauge load cell systems. Calibration method
BS 923-1:1990, IEC
60060-1:1989
Guide on high-voltage testing techniques. General
BS EN 12084:2001
Non-destructive testing. Eddy current testing. General principles and
guidelines
51 158
GBM10-Testing
BS EN 12223:2000
Non-destructive testing. Ultrasonic examination. Specification for
calibration block No.1
BS EN 12543-1:1999
Non-destructive testing. Characteristics of focal spots in industrial X-ray
systems for use in non-destructive testing. Scanning method
BS EN 12543-2:1999
systems for use in non-destructive testing. Pinhole camera radiographi c
method
BS EN 12543-3:1999
systems for use in non-destructive testing. Slit camera radiographic m
ethod
BS EN 12543-4:1999
systems for use in non-destructive testing. Edge method
BS EN 12543-5:1999
systems for use in non-destructive testing. Measurement of the effecti ve
focal spot size of mini and micro focus X-ray tubes
BS EN 12544-1:1999
Non-destructive testing. Measurement and evaluation of the X-ray tube
voltage. Voltage divider method
BS EN 12544-2:2000
voltage. Constancy check by the thick filter method
BS EN 12544-3:1999
voltage. Spectrometric method
BS EN 12668-1:2000
Non-destructive testing. Characterization and verification of ultrasonic
examination equipment. Instruments
BS EN 12668-2:2001
examination equipment. Probes
BS EN 12668-3:2000
examination equipment. Combined equipment
BS EN 12679:2000
Non-destructive testing. Determination of the size of industrial
radiographic sources. Radiographic method
BS EN 13018:2001 Non-destructive testing. Visual testing. General principles
BS EN 13068-1:2000
Non-destructive testing. Radioscopic testing. Quantitative measurement
of imaging properties
BS EN 13068-2:2000
Non-destructive testing. Radioscopic testing. Check of long term stability
of imaging devices
BS EN 13068-3:2001
Non-destructive testing. Radioscopic testing. General principles of
radioscopic testing of metallic materials by X- and gamma rays
BS EN 13184:2001 Non-destructive testing. Leak testing. Pressure change method
BS EN 13185:2001 Non-destructive testing. Leak testing. Tracer gas method
BS EN 13192:2002
Non-destructive testing. Leak testing. Calibration of reference leaks for
gases
BS EN 1330-1:1998 Non-destructive testing. Terminology. List of general terms
BS EN 1330-10:2003 Non-destructive testing. Terminology. Terms used in visual testing
BS EN 1330-2:1998
Non-destructive testing. Terminology. Terms common to the non-
destructive testing methods
52 158
GBM10-Testing
BS EN 1330-3:1997
Non-destructive testing. Terminology. Terms used in industrial
radiographic testing
BS EN 1330-4:2000 Non-destructive testing. Terminology. Terms used in ultrasonic testing
BS EN 1330-5:1998 Non-destructive testing. Terminology. Terms used in eddy current testing
BS EN 1330-7:2005
Non-destructive testing. Terminology. Terms used in magnetic particle
testing
BS EN 1330-8:1998 Non-destructive testing. Terminology. Terms used in leak tightness
BS EN 1330-9:2000
Non-destructive testing. Terminology. Terms used in acoustic emission
testing
BS EN 13477-1:2001
Non-destructive testing. Acoustic emission. Equipment characterization.
Equipment description
BS EN 13477-2:2001
Non-destructive testing. Acoustic emission. Equipment characterization.
Verification of operating characteristic
BS EN 13554:2002 Non-destructive testing. Acoustic emission. General principles
BS EN 13625:2002
Non-destructive testing. Leak test. Guide to the selection of
instrumentation for the measurement of gas leakage
BS EN 13860-1:2003
Non destructive testing. Eddy current examination. Equipment
characteristics and verification. Instrument characteristics and verification
BS EN 13860-2:2003
characteristics and verification. Probe characteristics and verification
BS EN 13860-3:2003
characteristics and verification. System characteristics and verification
BS EN 13925-1:2003
Non-destructive testing. X-ray diffraction from polycrystalline and
amorphous materials. General principles
BS EN 13925-2:2003
amorphous materials. Procedures
BS EN 13925-3:2005
amorphous materials. Instruments
BS EN 13927:2003 Non-destructive testing. Visual testing. Equipment
BS EN 14096-1:2003
Non-destructive testing. Qualification of radiographic film digitisation
systems. Definitions, quantitative measurements of image quality
paramete rs, standard reference film and qualitative control
BS EN 14096-2:2003
Non-destructive testing. Qualification of radiographic film digitisation
systems. Minimum requirements
BS EN 14127:2004 Non-destructive testing. Ultrasonic thickness measurement
BS EN 1518:1998
Non-destructive testing. Leak testing. Characterization of mass
spectrometer leak detectors
BS EN 1593:1999 Non-destructive testing. Leak testing. Bubble emission techniques
BS EN 1779:1999
Non-destructive testing. Leak testing. Criteria for method and technique
selection
BS EN 25580:1992
Specification for minimum requirements for industrial radiographic
illuminators for non-destructive testing
BS EN 462-1:1994
Non-destructive testing. Image quality of radiographs. Image quality
indicators (wire type). Determination of image quality value
53 158
GBM10-Testing
BS EN 462-2:1994
indicators (step/hole type). Determination of image quality value
BS EN 462-3:1997
classes for ferrous metals
BS EN 462-4:1995
Non-destructive testing. Image quality of radiographs. Experimental
evaluation of image quality values and image quality tables
BS EN 462-5:1996
indicators (duplex wire type), determination of image unsharpness value
BS EN 473:2000
Non-destructive testing. Qualification and certification of NDT
personnel. General principles
BS EN 50191:2001 Erection and operation of electrical test equipment
BS EN 571-1:1997 Non-destructive testing. Penetrant testing. General principles
BS EN 583-1:1999 Non-destructive testing. Ultrasonic examination. General principles
BS EN 583-2:2001
Non-destructive testing. Ultrasonic examination. Sensitivity and range
setting
BS EN 583-3:1997 Non-destructive testing. Ultrasonic examination. Transmission technique
BS EN 583-4:2002
Non-destructive testing. Ultrasonic examination. Examination for
discontinuities perpendicular to the surface
BS EN 583-5:2001
Non-destructive testing. Ultrasonic examination. Characterization and
sizing of discontinuities
BS EN 60052:2002 Voltage measurement by means of standard air gaps
BS EN 60060-2:1995 High-voltage test techniques. Measuring systems
BS EN 60068-1:1995,
IEC 60068-1:1988
Environmental testing. General and guidance
BS EN 60068-2-1:1993,
IEC 60068-2-1:1993
Environmental testing. Test methods. Tests A. Cold
BS EN 60068-2-
11:1999, IEC 60068-2-
11:1981
Environmental testing. Test methods. Tests. Test KA. Salt mist
BS EN 60068-2-
13:1999, IEC 60068-2-
13:1983
Environmental testing. Test methods. Tests. Test M. Low air pressure
BS EN 60068-2-
14:2000, IEC 60068-2-
14:1984
Environmental testing. Test methods. Test N. Change of temperature
BS EN 60068-2-
17:1995, IEC 60068-2-
17:1994
Environmental testing. Test methods. Test Q. Sealing
BS EN 60068-2-
18:2001, IEC 60068-2-
18:2000
Environmental testing. Test methods. Tests R and guidance. Water
BS EN 60068-2-2:1993,
IEC 60068-2-2:1974
Environmental testing. Test methods. Tests B. Dry heat
54 158
GBM10-Testing
BS EN 60068-2-
21:1997, IEC 60068-2-
21:1983
Environmental testing. Test methods. Test U. Robustness of terminations
and integral mounting devices
BS EN 60068-2-
21:1999, IEC 60068-2-
21:1999
Environmental testing. Test methods. Test U. Robustness of terminations
and integral mounting devices
BS EN 60068-2-
27:1993, IEC 60068-2-
27:1987
Environmental testing. Test methods. Environmental testing procedures.
Tests. Test Ea and guidance. Shock
BS EN 60068-2-
29:1993, IEC 60068-2-
29:1987
Tests. Test Eb and guidance. Bump
BS EN 60068-2-
30:1999, IEC 60068-2-
30:1980
Environmental testing. Test methods. Test Db and guidance: damp heat,
cyclic (12 + 12 hour cycle)
BS EN 60068-2-
31:1993, IEC 60068-2-
31:1969
Environmental testing. Test methods. Test Ec. Drop and topple, primarily
for equipment-type specimens
BS EN 60068-2- Environmental testing. Test methods. Test Ed. Free fall
BS EN 60068-2-
33:2000, IEC 60068-2-
33:1971
Environmental testing. Test methods. Guidance on change of temperature
tests
BS EN 60068-2-
38:1999, IEC 60068-2-
38:1974
Environmental testing. Test methods. Tests. Test Z/AD:composite
temperature/humidity cyclic test
BS EN 60068-2-
39:1999, IEC 60068-2-
39:1999
Environmental testing. Test methods. Tests. Test Z/AMD. Combined
sequential cold, low air pressure and damp heat test
BS EN 60068-2-
40:2000, IEC 60068-2-
40:1976
Environmental testing. Test methods. Test Z/AM. Combined cold/low air
pressure tests
BS EN 60068-2-
41:2000, IEC 60068-2-
41:1976
Environmental testing. Test methods. Tests. Test Z/BM: Combined dry
heat/low air pressure tests
BS EN 60068-2-
44:1995, IEC 60068-2-
44:1995
Environmental testing. Test methods. Tests. Guidance on Test T.
Soldering
BS EN 60068-2-
45:1993, IEC 60068-2-
45:1980
Environmental testing. Test methods. Environmental testing. Tests. Test
XA and guidance. Immersion in cleaning solvents
BS EN 60068-2-
47:2000, IEC 60068-2-
47:1999
Environmental testing. Test methods. Mounting of components,
equipment and other articles for vibration, impact and similar dynamic
tests
55 158
GBM10-Testing
BS EN 60068-2-
48:2000, IEC 60068-2-
48:1982
Environmental testing. Test methods. Guidance on the application of the
tests of IEC 60068 to simulate the effects of storage
BS EN 60068-2-5:2000,
IEC 60068-2-5:1975
Environmental testing. Test methods. Test Sa: Simulated solar radiation
at ground level
BS EN 60068-2-
50:2000, IEC 60068-2-
50:1983
Environmental testing. Test methods. Tests Z/AFc: Combined
cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat
dissipating sp ecimens
BS EN 60068-2-
51:2000, IEC 60068-2-
51:1983
Environmental testing. Test methods. Tests. Tests Z/BFc. Combined dry
heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dis
sipating specimens
BS EN 60068-2-
52:1996, IEC 60068-2-
52:1996
Environmental testing. Test methods. Tests. Test Kb. Salt mist cyclic
(sodium chloride solution)
BS EN 60068-2-
55:1993, IEC 60068-2-
55:1987
Tests. Test Ee and guidance. Bounce
BS EN 60068-2-
57:2000, IEC 60068-2-
57:1999
Environmental testing. Test methods. Test Ff. Vibration. Time-history
method
BS EN 60068-2-
58:2004
Environmental testing. Test methods. Test Td. Test methods for
solderability, resistance to dissolution of metallization and to soldering
heat of surface mounting devices (SMD)
BS EN 60068-2-
59:1993
Environmental testing. Test methods. Test Fe and guidance. Vibration
(sine-beat method)
BS EN 60068-2-6:1996,
IEC 60068-2-6:1995
Environmental testing. Test methods. Test Fc. Vibration (sinusoidal)
BS EN 60068-2-
60:1996, IEC 60068-2-
60:1995
Environmental testing. Test methods. Test Ke. Flowing mixed gas
corrosion test
BS EN 60068-2-
61:1994, IEC 60068-2-
61:1991
Environmental testing. Test methods. Test Z/ABDM. Climatic sequence
BS EN 60068-2-
64:1995, IEC 60068-2-
64:1993
Environmental testing. Test methods. Test Fh. Vibration, broad-band
random (digital control) and guidance
BS EN 60068-2-
65:1995, IEC 60068-2-
65:1993
Environmental testing. Test methods. Test Fg. Vibration, acoustically
induced
BS EN 60068-2-
66:1995, IEC 60068-2-
66:1994
Environmental testing. Test methods. Test Cx. Damp heat, steady state
(unsaturated pressurized vapour)
56 158
GBM10-Testing
BS EN 60068-2-
67:1996, IEC 60068-2-
67:1995
Environmental testing. Test methods. Test Cy. Damp heat, steady state,
accelerated test primarily intended for components
BS EN 60068-2-
68:1996, IEC 60068-2-
68:1994
Environmental testing. Test methods. Test L. Dust and sand
BS EN 60068-2-
69:1996, IEC 60068-2-
69:1995
Environmental testing. Test methods. Tests. Test Te. Solderability testing
of electronic components for surface mount technology by the wetting ba
lance method
BS EN 60068-2-7:1993,
IEC 60068-2-7:1983
Environmental testing. Test methods. Test Ga and guidance.
Acceleration, steady state
BS EN 60068-2-
70:1996, IEC 60068-2-
70:1995
Environmental testing. Test methods. Test Xb. Abrasion of markings and
letterings caused by rubbing of fingers and hands
BS EN 60068-2-
74:2000, IEC 60068-2-
74:1999
Environmental testing. Test methods. Test Xc: Fluid contamination
BS EN 60068-2-
75:1997, IEC 60068-2-
75:1997
Environmental testing. Test methods. Test Eh. Hammer tests
BS EN 60068-2-
77:1999, IEC 60068-2-
77:1999
Environmental testing. Test methods. Body strength and impact shock
BS EN 60068-2-
78:2002, IEC 60068-2-
78:2001
Environmental testing. Test methods. Test Cab. Damp heat, steady state
BS EN 60068-2-
81:2003
Environmental testing. Test methods. Test Ei. Shock. Shock response
spectrum synthesis
BS EN 60068-2-9:2000,
IEC 60068-2-9:1975
Environmental testing. Test methods. Tests. Guidance for solar radiation
testing
BS EN 60068-3-1:1999,
IEC 60068-3-1:1974,
IEC 60068-3-1A:1978
Environmental testing. Guidance. Cold and dry heat tests
BS EN 60068-3-2:1999,
IEC 60068-3-2:1976
Environmental testing. Guidance. Combined temperature/low air pressure
tests
BS EN 60068-3-3:1993
Environmental testing. Guidance. Environmental testing. Miscellaneous.
Guide to seismic test methods for equipment
BS EN 60068-3-4:2002,
IEC 60068-3-4:2001
Environmental testing. Guidance. Damp heat tests
BS EN 60068-3-5:2002,
IEC 60068-3-5:2001
Environmental testing. Guidance. Confirmation of the performance of
temperature chambers
BS EN 60068-3-6:2002,
IEC 60068-3-6:2001
Environmental testing. Guidance. Confirmation of the performance of
temperature/humidity chambers
57 158
GBM10-Testing
BS EN 60068-3-7:2002,
IEC 60068-3-7:2001
Environmental testing. Guidance. Measurements in temperature chambers
for tests A and B (with load)
BS EN 60068-3-8:2003 Environmental testing. Guidance. Selecting amongst vibration tests
BS EN 60068-4:1996,
IEC 60068-4:1987
Environmental testing. Information for specification writers. Test
summaries
BS EN 60068-5-2:2000,
IEC 60068-5-2:1990
Environmental testing. Guide to drafting of test methods. Terms and
definitions
BS EN 60112:2003
Method for the determination of the proof and the comparative tracking
indices of solid insulating materials
BS EN 60601-2-
17:2004
Medical electrical equipment. Particular requirements for safety.
Particular requirements for the safety of automatically-controlled
brachytherapy afterloading equipment
BS EN 60721-1:1996,
IEC 60721-1:1996
Classification of environmental conditions. Environmental parameters
and their severities
BS EN 60721-3-0:1993,
IEC 60721-3-0:1984
Classification of environmental conditions. Classification of groups of
environmental parameters and their severities. Introduction
BS EN 60721-3-1:1997,
IEC 60721-3-1:1997
environmental parameters and their severities. Storage
BS EN 60721-3-2:1997,
IEC 60721-3-2:1997
environmental parameters and their severities. Transportation
BS EN 60721-3-3:1995,
IEC 60721-3-3:1994
environmental parameters and their severities. Stationary use at
weatherpr otected locations
BS EN 60721-3-4:1995,
IEC 60721-3-4:1995
environmental parameters and their severities. Stationary use at non-
weath erprotected locations
BS EN 60721-3-5:1997,
IEC 60721-3-5:1997
environmental parameters and their severities. Ground vehicle installation
s
BS EN 60721-3-6:1993,
IEC 60721-3-6:1987
environmental parameters and their severities. Ship environment
BS EN 60721-3-7:1996,
IEC 60721-3-7:1995
environmental parameters and their severities. Portable and non-
stationary use
BS EN 60721-3-9:1993,
IEC 60721-3-9:1993
environmental parameters and their severities. Microclimates inside
produc ts
BS EN 61010-
031:2002, IEC 61010-
031:2002
Safety requirements for electrical equipment for measurement, control
and laboratory use. Safety requirements for hand-held probe assemblies
for e lectrical measurement and test
BS EN 61010-1:1993
and laboratory use. General requirements
BS EN 61010-1:2001,
IEC 61010-1:2001
58 158
GBM10-Testing
BS EN 61010-2-
010:2003
and laboratory use. Particular requirements for laboratory equipment for
the heating of material
BS EN 61010-2-
020:1995, IEC 61010-2-
020:1992
and laboratory use. Particular requirements for laboratory centrifuges
BS EN 61010-2-
032:2002
and laboratory use. Particular requirements for hand-held and hand-
manipulat ed current sensors for electrical test and measurement
BS EN 61010-2-
041:1997, IEC 61010-2-
041:1995
and laboratory use. Particular requirements for autoclaves using steam for
t he treatment of medical materials, and for laboratory processes
BS EN 61010-2-
042:1997, IEC 61010-2-
042:1997
and laboratory use. Particular requirements for autoclaves and sterilizers
u sing toxic gas for the treatment of medical materials, and for laboratory
processes
BS EN 61010-2-
043:1998, IEC 61010-2-
043:1997
and laboratory use. Particular requirements for dry heat sterilizers using e
ither hot air or hot inert gas for the treatment of medical materials, and
for laboratory processes
BS EN 61010-2-
045:2001
and laboratory use. Particular requirements for washer disinfectors used
in medical, pharmaceutical, veterinary and laboratory fields
BS EN 61010-2-
051:2003
and laboratory use. Particular requirements for laboratory equipment for
mix ing and stirring
BS EN 61010-2-
061:2003
and laboratory use. Particular requirements for laboratory atomic
spectromet ers with thermal atomization and ionization
BS EN 61010-2-
081:2002
and laboratory use. Particular requirements for automatic and semi-
automatic laboratory equipment for analysis and other purposes
BS EN 61010-2-
101:2002
and laboratory use. Particular requirements for in vitro diagnostic (IVD)
me dical equipment
BS EN 61032:1998,
IEC 61032:1997
Protection of persons and equipment by enclosures. Probes for
verification
BS EN 61180-1:1995,
IEC 61180-1:1992
High-voltage test techniques for low-voltage equipment. Definitions, test
and procedure requirements
BS EN 61180-2:1995,
IEC 61180-2:1994
High-voltage test techniques for low-voltage equipment. Test equipment
BS EN 61187:1996 Electrical and electronic measuring equipment. Documentation
BS EN 61207-3:2002
Expression of performance of gas analyzers. Paramagnetic oxygen
analyzers
59 158
GBM10-Testing
BS EN 61557-10:2001,
IEC 61557-10:2000
Electrical safety in low voltage distribution systems up to 1000 V a.c.
and 1500 V d.c. Equipment for testing, measuring or monitoring of
protecti ve measures. Combined measuring equipment for testing,
measuring or monitoring of protective measures
BS EN ISO 12706:2001 Non-destructive testing. Terminology. Terms used in penetrant testing
BS EN ISO 3059:2001
Non-destructive testing. Penetrant testing and magnetic particle testing.
Viewing conditions
BS EN ISO 3452- Non-destructive testing. Penetrant testing. Testing of penetrant materials
BS EN ISO 3452- Non-destructive testing. Penetrant testing. Reference test blocks
BS EN ISO 3452- Non-destructive testing. Penetrant testing. Equipment
BS EN ISO 9934- Non-destructive testing. Magnetic particle testing. General principles
BS EN ISO 9934- Non-destructive testing. Magnetic particle testing. Detection media
BS EN ISO 9934- Non-destructive testing. Magnetic particle testing. Equipment
BS EN ISO/IEC
17025:2005
General requirements for the competence of testing and calibration
laboratories
BS IEC 61010-3:1997
and laboratory use. Protocol for the preparation of conformity
verification reports for the IEC 61010 series
BS IEC 61010-3-
010:1999
and laboratory use. Conformity verification report for IEC 61010-2-010,
par ticular requirements for laboratory equipment for the heating of
materials
BS IEC 61010-3-
020:1999
and laboratory use. Conformity verification report for IEC 61010-2-
020:1992 , particular requirements for laboratory centrifuges
BS IEC 61010-3-
051:1999
par ticular requirements for laboratory equipment for mixing and stirring
BS IEC 61010-3-
061:1999
par ticular requirements for laboratory atomic spectrometers with thermal
atomization and ionization
BS IEC 61010-3-1:1997
and laboratory use. Conformity verification report for IEC 61010-1
BS ISO 14243-1:2002
Implants for surgery. Wear of total knee joint prostheses. Loading and
displacement parameters for wear-testing machines with load control and
cor responding environmental conditions for test
BS ISO 15632:2002
Microbeam analysis. Instrumental specification for energy dispersive X-
ray spectrometers with semiconductor detectors
BS ISO 3058:1998
Non-destructive testing. Aids to visual inspection. Selection of low-
power magnifiers
BS ISO 5725-1:1994
Accuracy (trueness and precision) of measurement methods and results.
General principles and definitions
60 158
GBM10-Testing
BS ISO TR 9705-
2:2001
Reaction to fire tests. Full scale room tests for surface products.
Technical background and guidance
DD ENV 583-6:2000
Non-destructive testing. Ultrasonic examination. Time-of-flight
diffraction technique as a method for detection and sizing of
discontinuities
HB 10210:2002 High Voltage Engineering and Testing
PD 6513:1985
Magnetic particle flaw detection. A guide to the principles and practice
of applying magnetic particle flaw detection in accordance with BS 6072
PD CEN/TR
14748:2004
Non-destructive testing. Methodology for qualification of non-destructive
tests
PD CR 13935:2000 Non-destructive testing. Generic NDE data format model
PD IEC TR 60721-4-
0:2002
Classification of environmental conditions. Guidance for the correlation
and transformation of environmental condition classes of IEC 60721-3 to
t he environmental tests of IEC 60068. Introduction
PD IEC TR 60721-4-
1:2002
t he environmental tests of IEC 60068. Storage
PD IEC TR 60721-4-
2:2002, IEC TR 60721-
4-2:2001
t he environmental tests of IEC 60068. Transportation
PD IEC TR 60721-4-
3:2002, IEC TR 60721-
4-3:2001
t he environmental tests of IEC 60068. Stationary use at weatherprotected
locations
PD IEC TR 60721-4-
4:2002
t he environmental tests of IEC 60068. Stationary use at non-
weatherprotected locations
PD IEC TR 60721-4-
5:2002, IEC TR 60721-
4-5:2001
t he environmental tests of IEC 60068. Ground vehicle installations
PD IEC TR 60721-4-
6:2002, IEC TR 60721-
4-6:2001
t he environmental tests of IEC 60068. Ship environment
PD IEC TR 60721-4-
7:2001, IEC TR 60721-
4-7:2001
t he environmental tests of IEC 60068. Portable and non-stationary use
PD IEC TR 61010-3-
032:2002
032:1994 . Particular requirements for hand-held current clamps for
electrical measurement and test
61 158
GBM10-Testing
PD IEC TR 61010-3-
043:2002
043:1997 . Particular requirements for dry heat sterilizers using either hot
air or hot inert gas for treatment of medical materials and for laboratory
processes
62 158
GBM11-Screw Threads & Fasten
01/705827 DC
BS A101. Aerospace series. Specification for general requirements for
titanium bolts
02/106055 DC prEN 14545. Timber structures. Connectors. Requirements
02/106220 DC
BS EN 14566. Mechanical fasteners for plasterboard systems.
Definitions, requirements and test methods
02/209273 DC
IEC 62329-1. Ed.1. Heat shrinkable moulded shapes. Part 1: Definitions
and general requirements
02/704460 DC
prEN 14399-1. High-strength structural bolting for preloading. Part 1:
02/704461 DC
Suitability test for preloading
02/704462 DC
System HR. Hexagon bolt and nut assemblies
02/704463 DC
System HV. Hexagon bolt and nut assemblies
02/704464 DC
Plain washers for system HR
02/704465 DC
Plain chamfered washers for systems HR and HV
02/711527 DC ISO 10684. Fasteners. Hot dip galvanized coatings
03/303227 DC
IEC 62329-2. Ed.1. Heat shrinkable moulded shapes. Part 2: Methods of
test
03/318786 DC
EN 14831. Fasteners. Tightening performance. Torque/Angle simplified
test method
03/319369 DC ISO 16047. Fasteners. Torque/clamp force testing
04/30109570 DC,
2004/30109570 DC
ISO 10664. Hexalobular internal driving feature for bolts and screws
04/30123693 DC,
2004/30123693 DC
EN 15048-1. Non-preloaded structural bolting assemblies. Part 1.
04/30123712 DC,
2004/30123712 DC
EN 15048-2. Non-preloaded structural bolting assemblies. Part 2.
Suitability test
92/80766 DC
Hexagon nuts and high-strength structural bolting with large width across
flats. Product grade B. Property classes 8 and 10 (prEN 780)
92/82315 DC
Hexagon nuts for structural bolting, style 1, hot dip galvanized (oversize
tapped). Product grades A and B. Property classes 5, 6, and 8 (ISO/DIS
7413)
92/82317 DC
Plain washers for high-strength structural bolting, hardened and tempered
(ISO/DIS 7415)
92/82318 DC
Plain washers, chamfered, hardened and tempered for high-strength
structural bolting (ISO/DIS 7416)
92/82325 DC
Hexagon nuts for high-strength structural bolting with large width across
flats. Product grade B. Property classes 8 and 10 (ISO/DIS 4775)
63 158
94/710126 DC
Prevailing torque type hexagon nuts with flange (with non-metallic
insert). Product grades A and B (revision of ISO 7043:1983)
94/713219 DC Mechanical fasteners. Hexagon products. Widths across flats. (prEN
95/711611 DC BS 919:Part 5. Gauges for trapezoidal screw threads
96/715431 DC
Hexagon bolts with flange. Small series. Product grade A (ISO/DIS
15071)
97/705554 DC
Pipe threads where pressure-tight joints are made on the threads. Part 2.
Verification by means of limit gauges (ISO/DIS 7-2)
97/706019 DC Plain washers. Normal series. Product grade C
97/709760 DC
Fasteners. Preloading test for the detection of hydrogen embrittlement.
Parallel bearing surface method (ISO/DIS 15330)
98/714133 DC
Hexagon bolts with flange with metric fine pitch thread. Small series.
Product grade combination A/B (ISO/DIS 15073)
99/711652 DC Specifications for wood screws (metric series)
BS 1083:1965
Specification for precision hexagon bolts, screws and nuts (B.S.W. &
B.S.F. threads)
BS 1098-1:1967 Specification for jig bushes. Inch units
BS 1104:1957 Specification for general purpose Acme screw threads
BS 1109:1943 Specification for cold forged mild steel rivets for cold closing
BS 1202-1:2002 Specification for nails. Steel nails
BS 1202-2:1974 Specification for nails. Copper nails
BS 1202-3:1974 Specification for nails. Aluminium nails
BS 1210:1963 Specification for wood screws
BS 1494-1:1964
Specification for fixing accessories for building purposes. Fixings for
sheet, roof and wall coverings
BS 1574:1994 Specification for split pins (inch series)
BS 1580:Parts 1 and
2:1962
Specification for Unified screw threads. Diameters in and larger
BS 1580-3:1965 Specification for Unified screw threads. Diameters below in
BS 1657:1950 Specification for buttress threads
BS 1768:1963
Specification for Unified precision hexagon bolts, screws, & nuts (UNC
& UNF threads). Normal series
BS 1769:1951
Specification. Unified black hexagon bolts, screws, nuts (UNC & UNF
threads). Heavy series
BS 1802:1951
Specification for steel spring washers for general engineering and
automobile purposes
BS 1804-1:1966 Specification for parallel steel dowel pins. Inch series
BS 1804-2:1968 Specification for parallel steel dowel pins. Metric series
BS 1804-3:1973
Specification for parallel steel dowel pins. Parallel and taper types having
screw threads for extraction purposes. Metric series
BS 1929:1953
Specification for screw threads and external dimensions of lamps for
endoscopic and diagnostic instruments
BS 1936-1:1952 Undercuts and runouts for screw threads. Inch screw threads
64 158
BS 1936-2:1991
Undercuts and runouts for screw threads. Specification for ISO metric
screw threads
BS 1974:1953
Specification for large aluminium alloy rivets ( in. to 1 in. nominal
diameters)
BS 1981:1991 Specification for unified machine screws and machine screw nuts
BS 2061:1953
Specification for phosphor bronze spring washers for general engineering
purposes
BS 21:1985
Specification for pipe threads for tubes and fittings where pressure-tight
joints are made on the threads (metric dimensions)
BS 2470:1973 Specification for hexagon socket screws and wrench keys. Inch series
BS 2693-1:1956 Specification for screwed studs. General purpose studs
BS 2693-2:1964
Specification for screwed studs. Recommendations for high grade studs
(with Class 5 interference fit threads to American Standard ASA B1.12)
BS 275:1927 Specification for dimensions of rivets ( inch to 1 inch diameter)
BS 2827:1957
Specification for machine screw nuts, pressed type (B.A. and Whitworth
form threads)
BS 325:1947 Specification for black cup and countersunk bolts and nuts
BS 3382:Parts 1 and
2:1961
Specification for electroplated coatings on threaded components.
Cadmium on steel components. Zinc on steel components
BS 3382:Parts 3 and
4:1965
Specification for electroplated coatings on threaded components. Nickel
or nickel plus chromium on steel components. Nickel or nickel plus
chromiu m on copper and copper alloy (including brass) components
BS 3382:Parts 5 and
6:1967
Specification for electroplated coatings on threaded components. Tin on
copper and copper alloy (including brass) components. Silver on copper
and copper alloy (including brass) components
BS 3382-7:1966
Specification for electroplated coatings on threaded components. Thicker
platings for threaded components
BS 3401:1961 Specification for beryllium copper crinkle washers
BS 3410:1961 Specification for metal washers for general engineering purposes
BS 3457:1973 Specification for materials for water tap and stopvalve seat washers
BS 3537:1979 Specification for gudgeon pins up to 200 mm diameter
BS 3575:1963 Specification for rivets for the attachment of friction linings
BS 3580:1964 Guide to design considerations on the strength of screw threads
BS 3643-1:1981 ISO metric screw threads. Principles and basic data
BS 3643-2:1981 ISO metric screw threads. Specification for selected limits of size
BS 3673-1:1968 Specification for spring retaining rings. Carbon steel circlips
BS 3673-2:1965 Specification for spring retaining rings. Carbon steel E clips
BS 3673-3:1968 Specification for spring retaining rings. Carbon steel C clips
BS 3673-4:1977 Specification for spring retaining rings. Carbon steel circlips - metric
BS 3692:2001 ISO metric precision hexagon bolts, screws and nuts. Specification
BS 4168-1:1981
Hexagon socket screws and wrench keys: metric series. Specification for
hexagon socket head cap screws
BS 4168-6:1982
hexagon socket button head screws
65 158
BS 4168-7:1982
hexagon socket shoulder screws
BS 4168-8:1982
hexagon socket countersunk head screws
BS 4174:1972 Specification for self-tapping screws and metallic drive screws
BS 4183:1967 Specification for machine screws and machine screw nuts. Metric series
BS 4185-1:1967 Machine tool components. Locknuts ('C' type, socket set screw locking)
BS 4185-10:1977
Machine tool components. Trapezoidal threads for lead and feed screw
assemblies
BS 4185-13:1985
Machine tool components. Specification for dimensions of counterbored
holes
BS 4185-14:1987
Machine tool components. Method for determination of the pilot
diameter of 60 centre holes
BS 4185-2:1967 Machine tool components. Collars
BS 4185-9:1976
Specification. Machine tool components. Levelling screws, nuts and
seating plates
BS 4190:2001 ISO metric black hexagon bolts, screws and nuts. Specification
BS 4320:1968
Specification for metal washers for general engineering purposes. Metric
series
BS 4377:1991
Specification for tapping of holes to receive wire thread inserts (ISO
metric threads)
BS 4395-1:1969
Specification for high strength friction grip bolts and associated nuts and
washers for structural engineering. General grade
BS 4395-2:1969
Specification for high strength friction grip bolts and associated nuts and
washers for structural engineering. Higher grade bolts and nuts and ge
neral grade washers
BS 4439:1969 Specification for screwed studs for general purposes. Metric series
BS 4463:1969
Specification for crinkle washers for general engineering purposes.
Metric series
BS 4464:1969
Specification for spring washers for general engineering and automobile
purposes. Metric series
BS 450:1958
Specification for machine screws and machine screw nuts (B.S.W. &
B.S.F. threads)
BS 4604-1:1970
Specification for the use of high strength friction grip bolts in structural
steelwork. Metric series. General grade
BS 4604-2:1970
Specification for the use of high strength friction grip bolts in structural
steelwork. Metric series. Higher grade (parallel shank)
BS 4620:1970 Specification for rivets for general engineering purposes
BS 46-3:1951
Keys and keyways and taper pins. Specification for solid and split taper
pins for general engineering purposes
BS 4827:1972 Specification for ISO miniature screw threads. Metric series
BS 4894:1993 Specification for bifurcated rivets for general purpose use (metric series)
BS 4895:1981 Specification for semi-tubular rivets for general purpose use
BS 4929-1:1973 Specification for steel hexagon prevailing-torque type nuts. Metric series
66 158
BS 4929-2:1973
Specification for steel hexagon prevailing-torque type nuts. Unified
(inch) series
BS 4933:1973
Specification for ISO metric black cup and countersunk head bolts and
screws with hexagon nuts
BS 5346:1976 Specification. ISO metric trapezoidal screw threads
BS 5590:1978 Specification for screw thread metric series measuring cylinders
BS 57:1951 Specification. B.A. screws bolts and nuts
BS 6040:1981, ISO
1891-1979
Nomenclature for bolts, screws, nuts and accessories
BS 61:1969 Specification for threads for light gauge copper tubes and fittings
BS 641:1951 Dimensions of small rivets for general purposes
BS 6487:1984, ISO
7378-1983
Specification for split pin holes and wire holes in bolts, screws and studs
BS 6528:1984, ISO
5408-1983
Glossary of terms for cylindrical screw threads
BS 6587:1985 Method of acceptance inspection for fasteners
BS 6605:1990 Specification for cross recesses for screws
BS 7345:1990, ISO
888:1976
Specification for nominal lengths of bolts, screws and studs and thread
lengths for general purpose bolts
BS 7364:1990
Specification for galvanized steel studs and channels for stud and sheet
partitions and linings using screw fixed gypsum wallboards
BS 7371-1:1991
Coatings on metal fasteners. Specification for general requirements and
selection guidelines
BS 7371-10:1994 Coatings on metal fasteners. Specification for organic coatings
BS 7371-11:1993
Coatings on metal fasteners. Specification for zinc flake non-
electrolytically applied cured coatings
BS 7371-2:1993
Coatings on metal fasteners. Specification for torque/clamping force
relationship
BS 7371-3:1993
Coatings on metal fasteners. Specification for electroplated zinc and
cadmium coatings
BS 7371-4:1994
Coatings on metal fasteners. Specification for electroplated nickel,
nickel/chromium and copper/nickel/chromium coatings
BS 7371-6:1998
Coatings on metal fasteners. Specification for hot dipped galvanized
coatings
BS 7371-7:1994
Coatings on metal fasteners. Specification for mechanically applied zinc
coatings
BS 7371-8:1998 Coatings on metal fasteners. Specification for sherardized coatings
BS 7371-9:1996
Coatings on metal fasteners. Specification for phosphate or phosphate
and oil coatings
BS 7419:1991 Specification for holding down bolts
BS 7433-1:1991
Cross recessed machine screws. Specification for pan head screws of
product grade A
BS 7433-2:1991
Cross recessed machine screws. Specification for countersunk flat head
screws product grade A and property class 4.8 only
67 158
BS 7433-3:1991
Cross recessed machine screws. Specification for raised countersunk head
screws product grade A
BS 746:2005
Fittings for installation of low pressure gas meters. Requirements and test
methods
BS 7496-1:1991 Cross-recessed tapping screws. Specification for pan head screws
BS 7496-2:1991
Cross-recessed tapping screws. Specification for countersunk flat head
screws
BS 7496-3:1991
Cross-recessed tapping screws. Specification for raised countersunk head
screws
BS 7564-2:1992, ISO
9449:1990
Tools for moulding. Centring sleeves
BS 7564-4:1992, ISO
8018-1985
Tools for moulding. Mould guide bushes, headed, and locating guide
bushes, headed
BS 7599:1992, ISO
7053:1992
Specification for hexagon washer head tapping screws
BS 7600:1992, ISO
10509:1992
Specification for hexagon flange head tapping screws
BS 7644-1:1993 Direct tension indicators. Specification for compressible washers
BS 7644-2:1993 Direct tension indicators. Specification for nut face and bolt face washers
BS 7670-1:1993
Steel nuts and bolts for resistance projection welding. Specification for
dimensions and properties
BS 7670-2:1997
Steel nuts and bolts for resistance projection welding. Specification for
welding of weld nuts and weld bolts
BS 768:1958 Specification for slotted grub screws
BS 7715:1994
Specification for prevailing torque type bolts, screws and studs with non-
metallic prevailing torque elements incorporated into the thread
BS 7724:1994 Specification for split pins (metric series)
BS 7751-1:1994
Prevailing torque type wire thread inserts. Specification for ISO metric
coarse pitch threads
BS 7751-2:1994
Prevailing torque type wire thread inserts. Specification for ISO metric
fine pitch threads
BS 7752-1:1994
Free running type wire thread inserts. Specification for ISO metric coarse
pitch threads
BS 7752-2:1994
Free running type wire thread inserts. Specification for ISO metric fine
pitch threads
BS 7753:1994 Specification for performance of prevailing torque wire thread inserts
BS 7764:1994 Specification for hexagon slotted nuts and castle nuts
BS 7774:1994, ISO
3800:1993
Threaded fasteners. Axial load fatigue testing. Test methods and
evaluation of results
BS 7776:1995 Glossary of torque terminology for threaded fasteners
BS 7795:1995
Specification for bolts, screws and studs with a pre-applied micro-
encapsulated chemical adhesive feature incorporated into the thread
BS 7805-1:1995
Swaged collar grooved rivets. Specification for sizes up to and including
10 mm diameter
68 158
BS 7805-2:1997
Swaged collar grooved rivets. Specification for sizes from 12.7 mm up to
and including 34.9 mm
BS 7814:1995
Specification for bolts and screws incorporating either underhead locking
or anti-rotation features
BS 7842:1996
Bolts, screws and studs with pre-applied thread sealing feature
incorporated into the thread
BS 7855-1:1996
Metric rivets for the attachment of friction linings. Specification for semi-
tubular rivets
BS 811:1950 Specification for cycle (B.S.C.) threads (formerly known as C.E.I.
BS 84:1956 Specification for parallel screw threads of Whitworth form
BS 856:1969 Specification for wing nuts
BS 916:1953
Specification for black bolts, screws and nuts, hexagon and square, with
B.S.W. threads, and partly machined bolts, screws and nuts, hexagon and
s quare, with B.S.W. or B.S.F. threads
BS 919-1:1960
Specification for screw gauge limits and tolerances. Gauges for screw
threads of Unified form
BS 919-2:1971
Specification for screw gauge limits and tolerances. Gauges for screw
threads of Whitworth and BA forms
BS 919-3:1968
Specification for screw gauge limits and tolerances. Gauges for ISO
metric screw threads
BS 919-4:1964
Specification for screw gauge limits and tolerances. Limits of size for
gauges for screw threads of Unified form diameters in and larger
BS 93:1951
Specification for British Association (B.A.) screw threads with tolerances
for sizes 0 B.A. to 16 B.A.
BS 951:1999 Electrical earthing. Clamps for earthing and bonding. Specification
BS EN 10226-1:2004
Pipe threads where pressure tight joins are made on the threads. Taper
external threads and parallel internal threads. Dimensions, tolerances and
designation
BS EN 10230-1:2000 Steel wire nails. Loose nails for general applications
BS EN 1075:2000
Timber structures. Test methods. Joints made with punched metal plate
fasteners
BS EN 12095:1997, BS
2782-11:Method
1111Q:1997
Plastics piping systems. Brackets for rainwater piping systems. Test
method for bracket strength
BS EN 12512:2001
Timber structures. Test methods. Cyclic testing of joints made with
mechanical fasteners
BS EN 13271:2002
Timber fasteners. Characteristic load-carrying capacities and slip-moduli
for connector joints
BS EN 13411-5:2003 Terminations for steel wire ropes. Safety. U-bolt wire rope grips
BS EN 14218:2003 Hexagon nuts with flange. Fine pitch thread
BS EN 14219:2003 Hexagon bolts with flange with metric fine pitch thread. Small series
BS EN 1515-1:2000 Flanges and their joints. Bolting. Selection of bolting
BS EN 1515-2:2001
Flanges and their joints. Bolting. Classification of bolt materials for steel
flanges, PN designated
69 158
BS EN 1661:1998 Hexagon nuts with flange
BS EN 1662:1998 Hexagon bolts with flange. Small series
BS EN 1663:1998 Prevailing torque type hexagon nuts with flange (with non-metallic
BS EN 1664:1998 Prevailing torque type all-metal hexagon nuts with flange
BS EN 1665:1997 Hexagon bolts with flange. Heavy series
BS EN 1666:1998
Prevailing torque type hexagon nuts with flange (with non-metallic
insert) with metric fine pitch thread
BS EN 1667:1998
Prevailing torque type all-metal hexagon nuts with flange with metric
fine pitch thread
BS EN 20225:1992,
ISO 225:1983
Fasteners. Bolts, screws, studs and nuts. Symbols and designations of
dimensions
BS EN 20273:1992,
ISO 273:1979
Fasteners. Clearance holes for bolts and screws
BS EN 20898-2:1994,
ISO 898-2:1992
Mechanical properties of fasteners. Nuts with specified proof load values.
Coarse thread
BS EN 20898-7:1995,
ISO 898-7:1992
Mechanical properties of fasteners. Torsional test and minimum torques
for bolts and screws with nominal diameters 1 mm to 10 mm
BS EN 22339:1992,
ISO 2339:1986
Taper pins, unhardened
BS EN 22340:1992,
ISO 2340:1986
Clevis pins without head
BS EN 22341:1992,
ISO 2341:1986
Clevis pins with head
BS EN 24015:1992,
ISO 4015:1979
Hexagon head bolts. Product grade B. Reduced shank (shank diameter
pitch diameter)
BS EN 24766:1992,
ISO 4766:1983
Slotted set screws with flat point
BS EN 26157-1:1992,
ISO 6157-1:1988
Fasteners. Surface discontinuities. Bolts, screws and studs for general
requirements
BS EN 26157-3:1992,
ISO 6157-3:1988
Fasteners. Surface discontinuities. Bolts, screws and studs for special
requirements
BS EN 27434:1992,
ISO 7434:1983
Slotted set screws with cone point
BS EN 27435:1992,
ISO 7435:1983
Slotted set screws with long dog point
BS EN 27436:1992,
ISO 7436:1983
Slotted set screws with cup point
BS EN 27721:1992,
ISO 7721:1983
Countersunk head screws. Head configuration and gauging
BS EN 28736:1992,
ISO 8736:1986
Taper pins with internal thread, unhardened
BS EN 28737:1992,
ISO 8737:1986
Taper pins with external thread, unhardened
70 158
BS EN 28738:1992,
ISO 8738:1986
Plain washers for clevis pins. Product grade A
BS EN 28749:1992,
ISO 8749:1986
Pins and grooved pins. Shear test
BS EN 28839:1992,
ISO 8839:1986
Mechanical properties of fasteners. Bolts, screws, studs and nuts made of
non-ferrous metals
BS EN 912:2000 Timber fasteners. Specifications for connections for timber
BS EN ISO 10484:2004 Widening test on nuts
BS EN ISO 10485:2004 Cone proof load test on nuts
BS EN ISO 10510:2000 Tapping screw and washer assemblies with plain washers
BS EN ISO 10511:1998 Prevailing torque type hexagon thin nuts (with non-metallic insert)
BS EN ISO 10512:1998
Prevailing torque type hexagon nuts (with non-metallic insert), style 1,
with metric fine pitch thread. Property classes 6, 8 and 10
BS EN ISO 10513:1998
Prevailing torque type all-metal hexagon nut, style 2, with metric fine
pitch thread. Property classes 8, 10 and 12
BS EN ISO 10642:2004 Hexagon socket countersunk head screws
BS EN ISO 10644:1998
Screw and washer assemblies with plain washers. Washer hardness
classes 200 HV and 300 HV
BS EN ISO 10664:1999 Hexalobular internal driving feature for bolts and screws
BS EN ISO 10666:1999
Drilling screws with tapping screw threads. Mechanical and functional
properties
BS EN ISO 10669:1999
Plain washers for tapping screw and washer assemblies. Normal and
large series. Product grade A
BS EN ISO 10673:1999
Plain washers for screw and washer assemblies. Small, normal and large
series. Product grade A
BS EN ISO 10683:2000 Fasteners. Non-electrolytically applied zinc flake coatings
BS EN ISO 11116-
1:1999
Gas cylinders. 17E taper thread for connection of valves to gas cylinders.
Specifications
BS EN ISO 11116-
2:1999
Gas cylinders. 17E taper thread for connection of valves to gas cylinders.
Inspection gauges
BS EN ISO 1207:1994 Slotted cheese head screws. Product grade A
BS EN ISO 1234:1998 Split pins
BS EN ISO 12777-
1:1997
Methods of test for pallet joints. Determination of bending resistance of
pallet nails, other dowel-type fasteners and staples
BS EN ISO 12777-
2:2000
Methods of test for pallet joints. Determination of withdrawal and head
pull-through resistance of pallet nails and staples
BS EN ISO 13337:1998 Spring-type straight pins. Slotted, light duty
BS EN ISO 14579:2001 Hexalobular socket head cap screws
BS EN ISO 14580:2001 Hexalobular socket cheese head screws
BS EN ISO 14583:2001 Hexalobular socket pan head screws
BS EN ISO 14584:2001 Hexalobular socket raised countersunk head screws
BS EN ISO 14585:2001 Hexalobular socket pan head tapping screws
BS EN ISO 14586:2001 Hexalobular socket countersunk head tapping screws
BS EN ISO 14587:2001 Hexalobular socket raised countersunk (oval) head tapping screws
71 158
BS EN ISO 14588:2001 Blind rivets. Terminology and definitions
BS EN ISO 14589:2001 Blind rivets. Mechanical testing
BS EN ISO 1478:2000 Tapping screw thread
BS EN ISO 1479:1995 Specification for hexagon-head tapping screws
BS EN ISO 1481:1995 Specification for slotted pan-head tapping screws
BS EN ISO 1482:1995
Specification for slotted countersunk (flat) head tapping screws (common
head style)
BS EN ISO 1483:1995
Slotted raised countersunk (oval) head tapping screws (common head
style)
BS EN ISO 15065:2005
Countersinks for countersunk head screws with head configuration in
accordance with ISO 7721
BS EN ISO 15245-
1:2001
Gas cylinders. Parallel threads for connection of valves to gas cylinders.
Specification
BS EN ISO 15245-
2:2001
Gas cylinders. Parallel threads for connection of valves to gas cylinders.
Gauge inspection
BS EN ISO 15330:1999
Fasteners. Preloading test for the detection of hydrogen embrittlement.
Parallel bearing surface method
BS EN ISO 15480:1999 Hexagon washer head drilling screws with tapping screw thread
BS EN ISO 15481:1999 Cross recessed pan head drilling screws with tapping screw thread
BS EN ISO 15482:1999
Cross recessed countersunk head drilling screws with tapping screw
thread
BS EN ISO 15483:1999
Cross recessed raised countersunk head drilling screws with tapping
screw thread
BS EN ISO 1580:1994 Slotted pan head screws. Product grade A
BS EN ISO 15973:2001
Closed and blind rivets with break pull mandrel and protruding head.
AIA/St
BS EN ISO 15974:2001
Closed and blind rivets with break pull mandrel and countersunk head.
AIA/St
BS EN ISO 15975:2002
Closed end blind rivets with break pull mandrel and protruding head.
AI/AIA
BS EN ISO 15976:2002 Closed end blind rivets with break pull mandrel and protruding head.
BS EN ISO 15977:2002
Open end blind rivets with break pull mandrel and protruding head.
AIA/St
BS EN ISO 15978:2002
Open end blind rivets with break pull mandrel and countersunk head.
AIA/St
BS EN ISO 15979:2002 Open end blind rivets with break pull mandrel and protruding head. St/St
BS EN ISO 15980:2002 Open end blind rivets with break pull mandrel and countersunk head.
BS EN ISO 15981:2002
AIA/AIA
BS EN ISO 15982:2002
AIA/AIA
BS EN ISO 15983:2002
A2/A2
72 158
BS EN ISO 15984:2002
A2/A2
BS EN ISO 16047:2005 Fasteners. Torque/clamp force testing
BS EN ISO 16048:2003 Passivation of corrosion-resistant stainless-steel fasteners
BS EN ISO 16426:2002 Fasteners. Quality assurance system
BS EN ISO 16582:2002
Cu/St or Cu/Br or Cu/SSt
BS EN ISO 16583:2002
Cu/St or Cu/Br or Cu/SSt
BS EN ISO 16584:2002
NiCu/St or NiCu/SSt
BS EN ISO 16585:2002 Closed end blind rivets with pull mandrel and protruding head. A2/SSt
BS EN ISO 2009:1995
Slotted countersunk flat head screws (common head style). Product grade
A
BS EN ISO 2010:1995
Countersunk slotted raised head screws (common head style). Product
grade A
BS EN ISO 21269:2004 Hexagon socket head cap screws with metric fine pitch thread
BS EN ISO 21670:2003 Hexagon weld nuts with flange
BS EN ISO 228-1:2003
Pipe threads where pressure-tight joints are not made on the threads.
Dimensions, tolerances and designation
BS EN ISO 228-2:2003
Pipe threads where pressure-tight joints are not made on the threads.
Verification by means of limit gauges
BS EN ISO 2320:1998
Prevailing torque type steel hexagon nuts. Mechanical and performance
requirements
BS EN ISO 2338:1998 Parallel pins of unhardened steel and austenitic stainless steel
BS EN ISO 2342:2003 Slotted headless screws with shank
BS EN ISO 23429:2004 Gauging of hexagon sockets
BS EN ISO 2702:1995 Heat-treated steel tapping screws. Mechanical properties
BS EN ISO 2739:1998 Sintered metal bushes. Determination of radial crushing strength
BS EN ISO 3269:2001 Fasteners. Acceptance inspection
BS EN ISO 3506-
1:1998
Mechanical properties of corrosion-resistant stainless-steel fasteners.
Bolts, screws and studs
BS EN ISO 3506- Mechanical properties of corrosion-resistant stainless-steel fasteners. Nuts
BS EN ISO 3506-
3:1998
Mechanical properties of corrosion-resistant stainless-steel fasteners. Set
screws and similar fasteners not under tensile stress
BS EN ISO 3506-
4:2003
Mechanical properties of corrosion-resistant stainless-steel fasteners.
Tapping screws
BS EN ISO 4014:2001 Hexagon head bolts. Product grades A and B
BS EN ISO 4016:2001 Hexagon head bolts. Product grade C
BS EN ISO 4017:2001 Hexagon head screws. Product grades A and B
BS EN ISO 4018:2001 Hexagon head screws. Product grade C
BS EN ISO 4026:2003 Hexagon socket set screws with flat point
BS EN ISO 4027:2003 Hexagon socket set screws with cone point
BS EN ISO 4028:2003 Hexagon socket set screws with dog point
73 158
BS EN ISO 4029:2003 Hexagon socket set screws with cup point
BS EN ISO 4032:2001 Hexagon nuts, style 1. Product grades A and B
BS EN ISO 4033:2001 Hexagon nuts, style 2. Product grades A and B
BS EN ISO 4034:2001 Hexagon nuts. Product grade C
BS EN ISO 4035:2001 Hexagon thin nuts (chamfered). Product grades A and B
BS EN ISO 4036:2001 Hexagon thin nuts (unchamfered). Product grade B
BS EN ISO 4042:2000 Fasteners. Electroplated coatings
BS EN ISO 4753:2000 Fasteners. Ends of parts with external ISO metric screw thread
BS EN ISO 4757:1995 Cross recesses for screws
BS EN ISO 4759-
1:2001
Tolerances for fasteners. Bolts, screws, studs and nuts. Product grades A,
B and C
BS EN ISO 4759-
3:2000
Tolerances for fasteners. Plain washers for bolts, screws and nuts.
Product grades A and C
BS EN ISO 4762:2004 Hexagon socket head cap screws
BS EN ISO 5845-
1:1999
Technical drawings. Simplified representation of the assemby of parts
with fasteners. General principles
BS EN ISO 6157- Fasteners. Surface discontinuities. Nuts
BS EN ISO 6410-
1:1996, BS 308-
1.10:1996
Technical drawings. Screw threads and threaded parts. General
conventions
BS EN ISO 6410-
2:1996, BS 308-
1.11:1996
Technical drawings. Screw threads and threaded parts. Screw thread
inserts
BS EN ISO 6410-
3:1996, BS 308-
1.20:1996
Technical drawings. Screw threads and threaded parts. Simplified
representation
BS EN ISO 7040:1998
Prevailing torque type hexagon nuts (with non-metallic insert), style 1.
Property classes 5, 8 and 10
BS EN ISO 7042:1998
Prevailing torque type all-metal hexagon nuts. Property classes 5, 8, 10
and 12
BS EN ISO 7045:1995 Pan head screws with type H or type Z cross recess. Product grade A
BS EN ISO 7046-
1:1994
Countersunk flat head screws (common head style) with type H or type Z
cross recess. Product grade A. Countersunk flat head screws (common
head st yle) with type H or type Z cross recess. Product grade A. Steel
property class 4.8
BS EN ISO 7046-
2:1995
Countersunk flat head screws (common head style) with type H or type Z
cross recess. Product grade A. Steel of property class 8.8, stainless steel
and non-ferrous metals
BS EN ISO 7047:1995
Countersunk raised head screws (common head style) with type H or
type Z cross recess. Product grade A
BS EN ISO 7048:1999 Cross recessed cheese head screws
BS EN ISO 7049:1995 Cross recessed pan head tapping screws
BS EN ISO 7050:1995
Specification for cross-recessed countersunk (flat) head tapping screws
(common head style)
74 158
BS EN ISO 7051:1995
Specification for cross-recessed raised countersunk (oval) head tapping
screws
BS EN ISO 7085:1999
Mechanical and performance requirements of case hardened and
tempered metric thread rolling screws
BS EN ISO 7089:2000 Plain washers. Normal series. Product grade A
BS EN ISO 7090:2000 Plain washers, chamfered. Normal series. Product grade A
BS EN ISO 7091:2000 Plain washers. Normal series. Product grade C
BS EN ISO 7092:2000 Plain washers. Small series. Product grade A
BS EN ISO 7093- Plain washers. Large series. Product grade A
BS EN ISO 7093- Plain washers. Large series. Product grade C
BS EN ISO 7094:2000 Plain washers. Extra large series. Product grade C
BS EN ISO 7380:2004 Hexagon socket button head screws
BS EN ISO 7719:1998
Prevailing torque type all-metal hexagon nuts, style 1. Property classes 5,
8 and 10
BS EN ISO 7721- Countersunk flat head screws. Penetration depth of cross recesses
BS EN ISO 8673:2001
Hexagon nuts, style 1, with metric fine pitch thread. Product grades A
and B
BS EN ISO 8674:2001
Hexagon nuts, style 2, with metric fine pitch thread. Product grades A
and B
BS EN ISO 8675:2001
Hexagon thin nuts (chamfered) with metric fine pitch thread. Product
grades A and B
BS EN ISO 8676:2001
Hexagon head screws with metric fine pitch thread. Product grades A and
B
BS EN ISO 8733:1998
Parallel pins with internal thread, of unhardened steel or austenitic
stainless steel
BS EN ISO 8734:1998 Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins)
BS EN ISO 8735:1998
Parallel pins with internal thread, of hardened steel or martensitic
stainless steel
BS EN ISO 8739:1998 Grooved pins. Full-length parallel grooved, with pilot
BS EN ISO 8740:1998 Grooved pins. Full-length parallel grooved, with chamfer
BS EN ISO 8741:1998 Grooved pins. Half-length reverse-taper grooved
BS EN ISO 8742:1998 Grooved pins. One-third-length centre grooved
BS EN ISO 8743:1998 Grooved pins. Half-length centre grooved
BS EN ISO 8744:1998 Grooved pins. Full-length taper grooved
BS EN ISO 8745:1998 Grooved pins. Half-length taper grooved
BS EN ISO 8746:1998 Grooved pins with round head
BS EN ISO 8747:1998 Grooved pins with countersunk head
BS EN ISO 8748:1998 Spring-type straight pins. Coiled, heavy duty
BS EN ISO 8750:1998 Spring-type straight pins. Coiled, standard duty
BS EN ISO 8751:1998 Spring-type straight pins. Coiled, light duty
BS EN ISO 8752:1998 Spring-type straight pins. Slotted, heavy duty
BS EN ISO 8765:2001 Hexagon head bolts with metric fine pitch thread. Product grades A and
BS EN ISO 887:2000
Plain washers for metric bolts, screws and nuts for general purposes.
General plan
75 158
BS EN ISO 898-1:1999
Mechanical properties of fasteners made of carbon steel and alloy steel.
Bolts, screws and studs
BS EN ISO 898-5:1999
Mechanical properties of fasteners made of carbon steel and alloy steel.
Set screws and similar threaded fasteners not under tensile stresses
BS EN ISO 898-6:1996
Mechanical properties of fasteners. Nuts with specified proof load values.
Fine pitch thread
BS ISO 1051:1999 Rivet shank diameters
BS ISO 10663:1999 Hexagon nuts with flange. Fine pitch thread
BS ISO 15072:1999
Hexagon bolts with flange with metric fine pitch thread. Small series.
Product grade A
BS ISO 261:1998 ISO general purpose metric screw threads. General plan
BS ISO 262:1998
ISO general purpose metric screw threads. Selected sizes for screws,
bolts and nuts
BS ISO 2982-2:2001 Rolling bearings. Accessories. Locknuts and locking devices. Dimensions
BS ISO 4161:1999 Hexagon nuts with flange. Coarse thread
BS ISO 68-1:1998 ISO general purpose screw threads. Basic profile. Metric screw threads
BS ISO 68-2:1998 ISO general purpose screw threads. Basic profile. Inch screw threads
BS ISO 7041:2002
Prevailing torque type hexagon nuts (with non-metallic insert), style 2.
Property classes 9 and 12
BS ISO 7720:1997 Prevailing torque type all-metal hexagon nuts, style 2. Property class 9
BS ISO 8693:1998 Tools for moulding. Flat ejector pins
BS ISO 885:2000 General purpose bolts and screws. Metric series. Radii under the head
BS ISO 8992:2005 Fasteners. General requirements for bolts, screws, studs and nuts
BS ISO 965-1:1998
ISO general purpose metric screw threads. Tolerances. Principles and
basic data
BS ISO 965-2:1998
ISO general purpose metric screw threads. Tolerances. Limits of sizes for
general purpose external and internal screw threads. Medium quality
BS ISO 965-3:1998
ISO general purpose metric screw threads. Tolerances. Deviations for
constructional screw threads
BS ISO 965-4:1998
hot-dip galvanized external screw threads to mate with internal screw th
reads tapped with tolerance position H or G after galvanizing
BS ISO 965-5:1998
internal screw threads to mate with hot-dip galvanized external screw th
reads with maximum size of tolerance position h before galvanizing
BS MA 82:1978, ISO
5483-1977
Specification for shipbuilding - oil and water drain screws
PD 6494:1980 Mismatch of screw thread systems
PD 6507:1982
Guidance on metric screw threads and fasteners for use by model
engineers
76 158
GBM17-Electrical Engineering
01/201847 DC
IEC 61340. Ed.1. Electrostatics. Part 4-4: Standard test methods for
specific applications. Electrostatic safety of flexible intermediate bulk
con tainers (FIBC). Test method and requirements
02/203840 DC
IEC 60204-1. Ed.5.0. Safety of machinery. Electrical equipment of
machines. Part 1: General requirements
02/205291 DC
IEC 61340-4-4. Ed.1. Electrostatics. Part 4-4: Standard test methods for
specific applications. Electrostatic protection of flexible intermediate
bulk containers (FIBC). Test method and requirements
02/206714 DC
IEC 60695-5-3. Ed.1. Fire hazard testing. Part 5-3: Corrosion damage
effects of fire effluent. Leakage current and metal loss test method
02/207241 DC IEC 60050-351. Ed.3. Control technology
02/207369 DC
IEC 61340-5-1. Ed.2. Electrostatics. Part 5-1: Protection of electronic
devices from electrostatic phenomena. General requirements
02/209094 DC
IEC 60335-2-XXX. Household and similar electrical appliances. Safety.
Part 2-XXX: Particular requirements for commercial microwave
appliances with insertion or contacting applicators
02/210294 DC
IEC 60050-102. Ed.1. International electrotechnical vocabulary. Part 102:
General concepts and linear algebra
02/400372 DC IEC 61014. Programmes for reliability growth
03/100554 DC
High Voltage Test Techniques. Part 3. Definitions and requirements for
on-site tests
03/113996 DC
IEC 60376 ED.2. Specification of technical grade SF6 for use in
electrical equipment
03/116099 DC
IEC 61078. Analysis techniques for dependability. Reliability block
diagram and Boolean methods
03/118777 DC
IEC 60812. Analysis techniques for system reliability. Procedure for
failure mode and effects analysis (FMEA)
03/118789 DC
IEC 60706-2. Maintainability of equipment. Part 2. Maintainability
requirements and studies during the design and development phase
03/118791 DC
IEC 60706-3. Maintainability of equipment. Part 3. Verification of
maintainability and collection, analysis and presentation of
maintainability da ta
03/301805 DC
IEC 60695-11-6. TS. Ed.1. Fire hazard testing. Part 11-6: Test flames.
Comparative burning characteristics of tubular polymeric materials
supporte d in a vertical position. Apparatus and test method
03/302192 DC
IEC 60445. Ed.4. Basic and safety principles for man-machine interface,
marking and identification. Identification of equipment terminals and of t
erminations of certain designated conductors, including general rules for
an alphanumeric system
03/302193 DC
IEC 60446. Ed.4. Basic and safety principles for man-machine interface,
marking and identification. Identification of conductors by colours or
num erals
77 158
03/308252 DC
BS 7970. Tests and requirements for metallic wire and foil sheath
constructions of power cables having XLPE insulation for rated voltages
from 66k V (Um = 72.5 kV) to 132kV (Um = 145 kV)
03/309751 DC
IEC 60695-9-1. Fire hazard testing. Part 9: Surface spread of flame.
General guidance
03/311404 DC
measurement, control, and laboratory use. Part 1. General requirements
03/311405 DC
IEC 61010-2-030. Ed.1.0. Safety requirements for electrical equipment
for measurement, control, and laboratory use. Part 30. Special
requirements for testing and measuring circuits
03/311411 DC
IEC 60695-1-11. Ed.1. Fire hazard testing. Part 1-11. Guidance for
assessing the fire hazard of electrotechnical products. Fire hazard
assessment
03/311412 DC
IEC 60695-11-21. TS. Ed.1. Fire hazard testing. Part 11-21. Test flames.
500 W vertical flame test for tubular polymeric materials
03/318460 DC
IEC 61340-4-4 Ed.1. Electrostatics. Part 4-4. Standard test methods for
specific applications. Electrostatic safety of flexible intermediate bulk
containers (FIBC). Test method and requirements
03/321548 DC
IEC 61340-4-6. Ed.1. Electrostatics. Part 4-6. Standard test methods for
specific applications. Test methods for the electrostatic safety of inter
mediate bulk containers (IBC)
04/100416 DC
IEC 61124. Ed.2. Reliability testing. Compliance tests for constant failure
rate and constant failure intensity
04/100443 DC,
2004/100443 DC
IEC 61160. Design review
04/30048351 DC,
2004/30048351 DC
IEC 61340-1-2. Electrostatics. Part 1-2. Guide to the principles of
electrostatics phenomena and their measurements
04/30087862 DC,
2004/30087862 DC
IEC 61175 ED.2. Industrial systems, installation and equipment and
industrial products. Designation of signals
04/30109047 DC,
2004/30109047 DC
EN 50423-2. Overhead electrical lines exceeding AC 1 kV up to and
including AC 45 kV. Part 2. Index of National Normative Aspects
04/30109050 DC,
2004/30109050 DC
EN 50423-3. Overhead electrical lines exceeding AC 1 kV up to and
including AC 45 kV. Part 3. Set of National Normative Aspects
04/30111706 DC,
2004/30111706 DC
IEC 60695-9-2 ED.2. Fire hazard testing. Part 9-2. Surface spread of
flame. Summary and relevance of test methods
04/30112476 DC,
2004/30112476 DC
IEC 61462. Composite insulators, hollow insulators for use in outdoor
and indoor electrical equipments. Definitions, test methods, acceptance
crit eria and design recommendations
04/30112692 DC,
2004/30112692 DC
IEC 60364 ED.1. Electrical installations of buildings. Part 6. Verification
04/30115650 DC,
2004/30115650 DC
IEC 60364-7-720 ED 1. Electrical installations of buildings. Part 7-720.
Requirements for special installations or locations. Caravan parks, campi
ng parks, marinas and similar locations
78 158
04/30116216 DC,
2004/30116216 DC
IEC TR 61508-0. Functional safety of electrical/electronic/programmable
electronic safety-related systems. Part 0. Functional safety and IEC
61508
04/30117599 DC,
2004/30117599 DC
IEC 61310-1. Safety of machinery. Indication, marking and actuation.
Part 1. Requirements for visual, acoustic and tactile signals
04/30117615 DC,
2004/30117615 DC
Part 2. Requirements for marking
04/30117619 DC,
2004/30117619 DC
Part 3. Requirements for the location and operation of actuators
04/30124138 DC,
2004/30124138 DC
IEC 60364-5-53 ED.4. Electrical installations of buildings. Part 5-53.
Selection and erection of electrical equipment. Isolation, switching and
co ntrol
05/30101071 DC IEC 61165. Application of Markov techniques
05/30127522 DC
IEC 61340-5-2 ED 2. Electrostatics. Part 5-2. Protection of electronic
devices from electrostatic phenomena. User guide
05/30127781 DC
IEC 60695-2-11 ED.2. Fire hazard testing. Part 2-11. Glowing/Hot-wire
based test methods. Glow wire flamability test methods for end products
05/30127785 DC
IEC 60695-2-12 ED.2. Fire hazard testing. Part 2-12. Glowing/hot-wire
based test methods. Glow wire flamability test methods for materials
05/30127789 DC
IEC 60695-2-13 ED.2. Fire hazard testing. Part 2-13. Glowing/hot-wire
based test methods. Glow-wire ignitability test method for materials
05/30127805 DC
IEC 61340-3-1 ED.2. Electrostatics. Part 3-1. Methods for simulation of
electrostatic effects. Human body model (HBM). Component testing
05/30127809 DC
IEC 61340-3-2 ED.2. Electrostatics. Part 3-2. Methods for simulation of
electrostatic effects. Machine model (MM). Component testing
05/30132195 DC
IEC 62056-47 ED 1. Electricity metering. Data exchange for meter
reading, tariff and load control. Part 47. COSEM transport layers for IP
networks
05/30133366 DC
EN 5XXXX BTTF 116-1. Standard for the inventory, control,
management, decontamination and/or disposal of electrical equipment
and insulating liqui ds containing PCBs
05/30133428 DC
IEC 62395-1. Electrical heat tracing systems for industrial and
commercial applications. Part 1. General and testing requirements
05/30133436 DC
IEC 62076. Test methods for induction channel and induction crucible
furnaces
05/30135949 DC
IEC 60695-1-30 ED 2. Fire hazard testing. Part 1-30. Guidance for
assessing the fire hazard of electrotechnical products. Use of preselection
test ing procedures
95/208053 DC
Draft International Standard IEC 1508-1. Functional safety: Safety
related systems. Part 1. General requirements (65A/179/CDV)
95/215918 DC
Harmonic mains current standard for information technology equipment
74(436)CDV
96/210385 DC Measurement guide for voltage characteristics (CLC/BTTF 68-6 (SEC)8)
96/211109 DC
Limits relating to the influence of electric power supply and traction
systems on telecommunications systems (CLC/TC 210(SEC)24)
79 158
96/211110 DC
Basic standard for the calculation and measurement methods relating to
the influence of electric power supply and traction systems on
telecommunic ation systems (CLC/TC 210(SEC)23)
96/211424 DC
IEC 1472. Live working. Minimum approach distances. Method of
calculation (IEC Document 78/204/CDV)
98/261038 DC
IEC 60695-6-2. Fire hazard testing. Smoke obscuration. Summary and
relevance of test methods DOCUMENT 89/287/CD
98/261862 DC
IEC 61340-1. Electrostatics. Part 1. Guide to the principles of
electrostatic phenomena (IEC/101/35/CD)
BIP 2021:2003 Wiring Regulations. IEE Guidance Note 7: Special locations. 2nd edition
BIP 2035:2004
IEE On-site Guide (BS 7671:2001, 16th edition Wiring Regulations
including Amendments 1 & 2:2004)
BIP 3013:2004
NICEIC Technical Manual on CD-ROM. The Interactive guide to
electrical installation standards
BS 4444:1989 Guide to electrical earth monitoring and protective conductor proving
BS 4727-1:Group
01:1983
Glossary of electrotechnical, power, telecommunication, electronics,
lighting and colour terms. Terms common to power, telecommunications
and elec tronics. Fundamental terminology
BS 4727-2:Group
16:1991, IEC 60050-
321:1986
Glossary of electrotechnical, power, telecommunication, electronics,
lighting and colour terms. Terms particular to power engineering.
Instrument transformers
BS 4778-3.1:1991
Quality vocabulary. Availability, reliability and maintainability terms.
Guide to concepts and related definitions
BS 4778-3.2:1991, IEC
60050-191:1990
Quality vocabulary. Availability, reliability and maintainability terms.
Glossary of international terms
BS 5754:1987 Specification for electrical analogue and state signals for use in coal
BS 5760-0:1986
Reliability of systems, equipment and components. Introductory guide to
reliability
BS 5760-10.2:1995,
IEC 60605-2:1994
Reliability of systems, equipment and components. Guide to reliability
testing. Design of test cycles
BS 5760-10.3:1993,
IEC 61070:1991
testing. Compliance test procedures for steady-state availability
BS 5760-10.5:1993,
IEC 61123:1991
testing. Compliance test plans for success ratio
BS 5760-12:1993, IEC
60863:1986
Reliability of systems, equipment and components. Guide to the
presentation of reliability, maintainability and availability predictions
BS 5760-13.1:1993,
IEC 60605-3-1:1986
test conditions for consumer equipment. Conditions providing a low
degree o f simulation for indoor portable equipment
BS 5760-13.2:1993,
IEC 60605-3-2:1986
test conditions for consumer equipment. Conditions providing a high
degree of simulation for equipment for stationary use in weatherprotected
locations
80 158
BS 5760-13.3:1993,
IEC 60605-3-3:1992
degree o f simulation for equipment for stationary use in partially
weatherprotected locations
BS 5760-13.4:1993,
IEC 60605-3-4:1992
degree o f simulation for equipment for portable and non-stationary use
BS 5760-13.5:1996,
IEC 60605-3-5:1996
test conditions for consumer equipment. Ground mobile equipment. Low
degree of simulation
BS 5760-13.6:1997,
IEC 60605-3-6:1996
test conditions for consumer equipment. Outdoor transportable
equipment. Lo w degree of simulation
BS 5760-14:1993, IEC
61160:1992
Reliability of systems, equipment and components. Guide to formal
design review
BS 5760-15:1995, IEC
61165:1995
application of Markov techniques
BS 5760-16.1:1996,
IEC 61163-1:1995
Reliability of systems, equipment and components. Guide to stress
screening. Repairable items manufactured in lots
BS 5760-2:1994
assessment of reliability
BS 5760-3:1982
practices: examples
BS 5760-4:2003
specification of dependability requirements
BS 5760-5:1991
Reliability of systems, equipment and components. Guide to failure
modes, effects and criticality analysis (FMEA and FMECA)
BS 5760-7:1991, IEC
61025:1990
Reliability of systems, equipment and components. Guide to fault tree
analysis
BS 5760-8:1998
Reliability of systems, equipment and components. Guide to assessment
of reliability of systems containing software
BS 5958-1:1991
Code of practice for control of undesirable static electricity. General
considerations
BS 5958-2:1991
Code of practice for control of undesirable static electricity.
Recommendations for particular industrial situations
BS 6396:2002 Electrical systems in office furniture and office screens. Specification
BS 6458-2.1:1984, IEC
60695-2-1:1980
Fire hazard testing for electrotechnical products. Test methods. Glow-
wire test
BS 6458-2.3:1985, IEC
60695-2-3:1984
Fire hazard testing for electrotechnical products. Test methods. Bad-
connection test with heaters
BS 6548-1:1984, IEC
60706-1:1982
Maintainability of equipment. Guide to specifying and contracting for
maintainability
BS 6548-2:1992, IEC
60706-2:1990
Maintainability of equipment. Guide to maintainability studies during the
design phase
81 158
BS 6548-3:1992, IEC
60706-3:1987
Maintainability of equipment. Guide to maintainability, verification and
the collection, analysis and presentation of maintainability data
BS 6548-5:1995, IEC
60706-5:1994
Maintainability of equipment. Guide to diagnostic testing
BS 7454:1991, IEC
60949:1988
Method for calculation of thermally permissible short-circuit currents,
taking into account non-adiabatic heating effects
BS 7506-1:1995 Methods for measurement in electrostatics. Guide to basic electrostatics
BS 7506-2:1996 Methods for measurement in electrostatics. Test methods
BS 7671:2001
Requirements for electrical installations. IEE Wiring Regulations.
Sixteenth edition
BS 7697:1993 Nominal voltages for low voltage public electricity supply systems
BS 7845:1996
Guide to the use of BS 3939 and BS EN 60617. Graphical symbols for
diagrams
BS 7998-3:2002, IEC
60027-3:2002
Letter symbols to be used in electrical technology. Logarithmic and
related quantities, and their units
BS 8444-3:1996, IEC
60300-3-9:1995
Risk management. Guide to risk analysis of technological systems
BS EN 50160:2000
Voltage characteristics of electricity supplied by public distribution
systems
BS EN 50162:2004 Protection against corrosion by stray current from direct current systems
BS EN 50191:2001 Erection and operation of electrical test equipment
BS EN 50419:2005
Marking of electrical and electronic equipment in accordance with article
11(2) of directive 2002/96/EC (WEEE)
BS EN 60068-3-8:2003 Environmental testing. Guidance. Selecting amongst vibration tests
BS EN 60073:2002
Basic and safety principles for man-machine interface, marking and
identification. Coding principles for indicators and actuators
BS EN 60204-1:1993
Safety of machinery. Electrical equipment of machines. Specification for
general requirements
BS EN 60204-1:1998,
IEC 60204-1:1997
Safety of machinery. Electrical equipment of machines. General
requirements
BS EN 60204-11:2001,
IEC 60204-11:2000
Safety of machinery. Electrical equipment of machines. Requirements for
HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not
exceedi ng 36 kV
BS EN 60270:2001,
IEC 60270:2000
High-voltage test techniques. Partial discharge measurements
BS EN 60300-3-1:2004
Dependability management. Application guide. Analysis techniques for
dependability. Guide on methodology
BS EN 60300-3-2:2005
Dependability management. Application guide. Collection of
dependability data from the field
BS EN 60332-1-1:2004
Tests on electric and optical fibre cables under fire conditions. Test for
vertical flame propagation for a single insulated wire or cable. Appara tus
BS EN 60332-2-1:2004
Tests on electric and optical fibre cables under fire conditions. Tests for
vertical flame propagation for a single small insulated wire or cable.
Apparatus
82 158
BS EN 60335-2-
90:1998, IEC 60335-2-
90:1997
Specification for safety of household and similar electrical appliances.
Particular requirements. Commercial microwave ovens
BS EN 60417-1:1999,
IEC 60417-1:1998
Graphical symbols for use on equipment. Overview and application
BS EN 60417-2:1999,
IEC 60417-2:1998
Graphical symbols for use on equipment. Symbol originals
BS EN 60445:2000,
IEC 60445:1999
identification. Identification of equipment terminals and of terminations
of ce rtain designated conductors, including general rules for an
alphanumeric system
BS EN 60446:2000,
IEC 60446:1999
identification. Identification of conductors by colours or numerals
BS EN 60447:2004
identification. Actuating principles
BS EN 60617-10:1996,
IEC 60617-10:1996
Graphical symbols for diagrams. Telecommunications. Transmission
BS EN 60617-11:1997,
IEC 60617-11:1996
Graphical symbols for diagrams. Architectural and topographical
installation plans and diagrams
BS EN 60617-12:1999,
IEC 60617-12:1997
Graphical symbols for diagrams. Binary logic elements
BS EN 60617-13:1993,
IEC 60617-13:1993
Graphical symbols for diagrams. Analogue elements
BS EN 60617-2:1996,
IEC 60617-2:1996
Graphical symbols for diagrams. Symbol elements, qualifying symbols
and other symbols having general application
BS EN 60617-3:1996,
IEC 60617-3:1996
Graphical symbols for diagrams. Conductors and connecting devices
BS EN 60617-4:1996,
IEC 60617-4:1996
Graphical symbols for diagrams. Basic passive components
BS EN 60617-5:1996,
IEC 60617-5:1996
Graphical symbols for diagrams. Semiconductors and electron tubes
BS EN 60617-6:1996,
IEC 60617-6:1996
Graphical symbols for diagrams. Production and conversion of electrical
energy
BS EN 60617-7:1996,
IEC 60617-7:1996
Graphical symbols for diagrams. Switchgear, controlgear and protective
devices
BS EN 60617-8:1996,
IEC 60617-8:1996
Graphical symbols for diagrams. Measuring instruments, lamps and
signalling devices
BS EN 60617-9:1996,
IEC 60617-9:1996
Graphical symbols for diagrams. Telecommunications. Switching and
peripheral equipment
BS EN 60695-10- Fire hazard testing. Abnormal heat. Ball pressure test
BS EN 60695-10- Fire hazard testing. Abnormal heat. Mould stress relief distortion test
BS EN 60695-1-1:2000,
IEC 60695-1-1:1999
products. General guidelines
83 158
BS EN 60695-11-
10:1999, IEC 60695-11-
10:1999
Fire hazard testing. Test flames. 50 W horizontal and vertical flame test
methods
BS EN 60695-11-
20:1999, IEC 60695-11-
20:1999
Fire hazard testing. Test flames. 500 W flame test methods
BS EN 60695-11-
5:2005
Fire hazard testing. Test flames. Needle-flame test method. Apparatus,
confirmatory test arrangement and guidance
BS EN 60695-1-
30:2002
products. Use of preselection testing procedures
BS EN 60695-2-
10:2001, IEC 60695-2-
10:2000
Fire hazard testing. Test methods. Glowing/hot-wire based test methods.
Glow-wire apparatus and common test procedure
BS EN 60695-2-
11:2001, IEC 60695-2-
11:2001
Glow-wire flammability test method for end-products
BS EN 60695-2-
12:2001, IEC 60695-2-
12:2000
Glow-wire flammability test method for materials
BS EN 60695-2-
13:2001, IEC 60695-2-
13:2000
Fire hazard testing. Test methods. Glowing/hot-wire based tests methods.
Glow-wire ignitability test method for materials
BS EN 60695-2-
4/0:1993, IEC 60695-2-
4/0:1991
Fire hazard testing. Diffusion type and premixed type flame test methods
BS EN 60695-5-1:2003
Fire hazard testing. Assessment of potential corrosion damage by fire
effluent. General guidance
BS EN 60695-6-1:2001,
IEC 60695-6-1:2001
Fire hazard testing. Smoke opacity. General guidance
BS EN 60695-7-1:2004
Fire hazard testing. Guidance on the minimization of toxic hazards due to
fires involving electrotechnical products. Toxicity of fire effluent. Ge
neral guidance
BS EN 60695-8-1:2001,
IEC 60695-8-1:2001
Fire hazard testing. Heat release. General guidance
BS EN 60695-9-1:1999,
IEC 60695-9-1:1998
Fire hazard testing. Surface spread of flame. General guidance
BS EN 60909-0:2001,
IEC 60909-0:2001
Short-circuit currents in three-phase a.c. systems. Calculation of currents
BS EN 61010-1:2001,
IEC 61010-1:2001
BS EN 61078:1994, BS
5760-9:1992, IEC
61078:1991
Reliability of systems, equipment and components. Guide to the block
diagram technique
84 158
BS EN 61082-1:1993,
IEC 61082-1:1991
Preparation of documents used in electrotechnology. General
requirements
BS EN 61082-2:1994,
IEC 61082-2:1993
Preparation of documents used in electrotechnology. Function-oriented
diagrams
BS EN 61082-3:1994,
IEC 61082-3:1993
Preparation of documents used in eletrotechnology. Connection diagrams,
tables and lists
BS EN 61082-4:1996,
IEC 61082-4:1996
Preparation of documents used in electrotechnology. Location and
installation documents
BS EN 61140:2002,
IEC 61140:2001
Protection against electric shock. Common aspects for installation and
equipment
BS EN 61175:1993,
IEC 61175:1993
Designations for signals and connections
BS EN 61310-1:1995,
IEC 61310-1:1995
Safety of machinery. Indication, marking and actuation. Requirements for
visual, auditory and tactile signals
BS EN 61310-2:1995,
IEC 61310-2:1995
marking
BS EN 61310-3:1999,
IEC 61310-3:1999
the location and operation of actuators
BS EN 61340-2-1:2002
Electrostatics. Measurement methods. Ability of materials and products
to dissipate static electric charge
BS EN 61340-2-3:2000,
IEC 61340-2-3:2000
Electrostatics. Methods of test for determining the resistance and
resistivity of solid planar materials used to avoid electrostatic charge
accumu lation
BS EN 61340-3-1:2002,
IEC 61340-3-1:2002
Electrostatics. Methods for simulation of electrostatic effects. Human
body model (HBM). Component testing
BS EN 61340-3-2:2002
Electrostatics. Methods for simulation of electrostatic effects. Machine
model (MM). Component testing
BS EN 61340-4-3:2002,
IEC 61340-4-3:2001
Electrostatics. Standard test methods for specific applications. Footwear
BS EN 61340-5-1:2001
Electrostatics. Protection of electronic devices from electrostatic
phenomena. General requirements
BS EN 61340-5-2:2001
Electrostatics. Protection of electronic devices from electrostatic
phenomena. User guide
BS EN 61346-1:1996,
IEC 61346-1:1996
Industrial systems, installations and equipment and industrial products.
Structuring principles and reference designations. Basic rules
BS EN 61355:1997,
IEC 61355:1997
Classification and designation of documents for plants, systems and
equipment
BS EN 61508 Parts 1-7
(CD-ROM)
Functional safety of electrical/electronic/programmable electronic safety-
related systems (CD ROM)
BS EN 61508-1:2002
related systems. General requirements
BS EN 61508-2:2002
related systems. Requirements for electrical/electronic/programmable ele
ctronic safety-related systems
85 158
BS EN 61508-3:2002
related systems. Software requirements
BS EN 61508-4:2002
related systems. Definitions and abbreviations
BS EN 61508-5:2002
related systems. Examples of methods for the determination of safety int
egrity levels
BS EN 61508-6:2002
related systems. Guidelines on the application of IEC 61508-2 and IEC
61 508-3
BS EN 61508-7:2002
related systems. Overview of techniques and measures
BS EN 61703:2002
Mathematical expressions for reliability, availability, maintainability and
maintenance support terms
BS EN 62023:2001,
IEC 62023:2000
Structuring of technical information and documentation
BS EN 62027:2001 Preparation of parts lists
BS EN 62061:2005
Safety of machinery. Functional safety of safety-related electrical,
electronic and programmable electronic control systems
BS IEC 60050- International electrotechnical vocabulary. Mathematics
BS IEC 60050-
195:1998
International electrotechnical vocabulary. Earthing and protection against
electric shock
BS IEC 60050- International electrotechnical vocabulary. Automatic control
BS IEC 60050- International electrotechnical vocabulary. Power electonics
BS IEC 60050- International electrotechnical vocabulary. Live working
BS IEC 60050-
821:1998
International electrotechnical vocabulary. Signalling and security
apparatus for railways
BS IEC 60300-3-
10:2001
Dependability management. Application guide. Maintainability
BS IEC 60300-3-5:2001
Dependability management. Application guide. Application guide.
Reliability test conditions and statistical test principles
BS IEC 60300-3-6:1997
Dependability management. Application guide. Software aspects of
dependability
BS IEC 60605-4:2001
Equipment reliability testing. Statistical procedures for exponential
distribution. Point estimates, confidence intervals, prediction intervals an
d tolerance intervals
BS IEC 60605-6:1997
Equipment reliability testing. Tests for the validity of the constant failure
rate or constant failure intensity assumptions
BS IEC 60943:1998
Guidance concerning the permissible temperature rise for parts of
electrical equipment, in particular for terminals
BS IEC 61124:1997
Reliability testing. Compliance tests for constant failure rate and constant
failure intensity
BS IEC 61649:1997
Procedures for goodness-of-fit tests, confidence intervals and lower
confidence limits for Weibull distributed data
86 158
BS IEC 61650:1997
Reliability data analysis techniques. Procedures for comparison of two
constant failure rates and two constant failure (event) intensities
BS IEC 61710:2000 Power law model. Goodness-of-fit tests and estimation methods
BS IEC 61882:2001 Hazard and operability studies (HAZOP studies). Application guide
BS IEC TS 60695-9-
2:2001
Fire hazard testing. Surface spread of flame. Summary and relevance of
test methods
BS IEC/TS 60695-8-
2:2001
Fire hazard testing. Heat release. Summary and relevance of test methods
DD CLC TS Qualification of electrical installation contractors
DD IEC TS 60695-11-
3:2004
Fire hazard testing. Test flames. 500 W flames. Apparatus and
confirmational test methods
DD IEC TS 60695-11-
4:2004
Fire hazard testing. Test flames. 50 W flame. Apparatus and
confirmational test method
DD IEC TS 60695-11-
40:2002
Fire hazard testing. Test flames. Confirmatory tests. Guidance
DD IEC TS 60695-2-
20:2004
Fire hazard testing. Glowing/hot wire based test methods. Hot-wire coil
ignitability. Apparatus, test method and guidance
DD IEC TS 60695-7-
3:2004
Fire hazard testing. Toxicity of fire effluent. Use and interpretation of
test results
DD IEC TS 60695-7-
51:2002
Fire hazard testing. Toxicity of fire effluent. Estimation of toxic potency.
Calculation and interpretation of test results
HB 10194:2001
Code of Practice for In-service Inspection and Testing of Electrical
Equipment. 2nd edition
HB 10204:2002 Handbook on the Wiring Regulations. 3rd edition
HB 10205:2002
Wiring Regulations: Guidance Note 1: Selection and erection of
equipment. 4th edition
HB 10206:2002 Wiring Regulations: Guidance Note 2: Isolation and switching. 4th
HB 10207:2002 Wiring Regulations: Guidance Note 4: Protection against fire. 4th edition
HB 10208:2002
Wiring Regulations: Guidance Note 5: Protection against electric shock.
4th edition
HB 10209:2002
Wiring Regulations: Guidance Note 6: Protection against overcurrent. 4th
edition
HB 10210:2002 High Voltage Engineering and Testing
KIT 66 Functional safety set (BS IEC 61508)
KIT 89 Safety of machinery. Electrotechnical
PD 6536:1992, IEC
61201:1992
Extra-low voltage (ELV). Limit values
PD 6575-2:1995, IEC
60865-2:1994
Short-circuit currents. Calculation of effects. Examples of calculation
PD 7639-1:1994, IEC
60909-1:1991
Short-circuit current calculation in three-phase a.c. systems. Factors for
the calculation of short-circuit currents in three-phase a.c. systems a
ccording to BS 7639
87 158
PD 7639-2:1994, IEC
60909-2:1992
Short-circuit current calculation in three-phase a.c. systems. Data for
electrical equipment for short-circuit current calculations in accordance
with BS 7639
PD CLC/TR Wind turbines. Electromagnetic compatibility
PD CLC/TR
50404:2003
Electrostatics. Code of practice for the avoidance of hazards due to static
electricity
PD CLC/TR Guide for the application of the European Standard EN 50160
PD CLC/TR
50442:2005
Guidelines for product committees on the preparation of standards related
to human exposure from electromagnetic fields
PD IEC 61340-2-
2:2000, IEC TR 61340-
2-2:2000
Electrostatics. Measurement methods. Measurement of chargeability
PD IEC TR 60695-7-
2:2002
Fire hazard testing. Toxicity of fire effluent. Summary and relevance of
test methods
PD IEC TR 60909-
1:2002
Short-circuit currents in three-phase a.c. systems. Factors for the
calculation of short-circuit currents according to IEC 60909-0
PD IEC TR 61508-
0:2005
related systems. Functional safety and IEC 61508
PD IEC TR
62051:1999, IEC TR
62051:1999
Electricity metering. Glossary of terms
TH 20338 World Electricity Supplies. Voltages and frequencies
TH 42073 CE Marking for Machinery. A guide to the European Directive
TH 42075 The Low Voltage Directive. A guide to CE marking
88 158
GBM48-Construction in General
00/242566 DC IEC 61662, Ed .2. Risk due to lightning (IEC 81/156/CD)
01/105834 DC
BS 8411. Code of practice for safety nets on construction sites and other
works
01/105835 DC
BS 8410. Code of practice for containment nets, sheets and glass-
reinforced plastics profiled sheets on construction works
01/106471 DC
ISO/DIS 15689. Road construction and maintenance equipment. Powder
binder spreaders. Terminology and commercial specifications
02/104193 DC
prEN 13063-2. Chimneys. System chimneys with clay/ceramic flue
liners. Part 2: Requirements and test methods under wet conditions
02/104377 DC
BS EN 14500. Blinds and shutters. Thermal and visual comfort. Test
methods
02/104378 DC
BS EN 14501. Blinds and shutters. Thermal and visual comfort.
Assessment of performances
02/105261 DC
BS EN 1337-8. Structural bearings. Guided bearings and restrained
bearings
02/120707 DC
prEN 14320-1. Thermal insulating products for building equipment and
industrial installations. In-situ formed sprayed rigid polyurethane foam
(PUR ) products. Part 1: Specification for the rigid foam spray system
before installation
02/120708 DC
prEN 14320-2. Thermal insulating products for building equipment and
industrial installations. In-situ formed sprayed rigid polyurethane foam
(PUR ) products. Part 2: Specification for the installed products
02/207304 DC
prEN 50164-3. Lightning Protection Components (LPC). Part 3:
Requirements for isolating spark gaps
03/302292 DC
EN 14630. Products and systems for the protection and repair of concrete
structures. Test methods. Determination of carbonation depth in hardened
concrete by the phenolphthalein method
03/314635 DC
ISO 15673. Guidelines for the simplified design of structural reinforced
concrete for buildings
03/315081 DC
EN 14732-2. Timber structures. Prefabricated wall, floor and roof
elements. Part 2. Performance requirements and minimum production
requirements
03/700514 DC
BS EN 1991-1-1 National Annex (Informative) to BS EN 1991-1-1
Eurocode 1. Actions on Structures. Part 1.1. General Actions. Densities,
Self-weight , Imposed Loads for Buildings
04/30048871 DC,
2004/30048871 DC
BS EN 14964. Roof covering products for discontinuous laying and
products for wall cladding. Rigid underlays for discontinuous roofing.
Definition s and characteristics
04/30081109 DC,
2004/30081109 DC
BS EN ISO 140-16. Acoustics. Measurement of sound insulation in
buildings and of building elements. Part 16. Laboratory measurement of
the sound r eduction index improvement by additional lining
04/30104570 DC,
2004/30104570 DC
BS 8103-2. Structural design of low rise buildings. Part 2. Code of
practice for masonry walls for housing
89 158
04/30113504 DC,
2004/30113504 DC
BS EN 14933. Light weight fill and insulation products for civil
engineering applications. Factory made products of expanded polystyrene
(EPS). Sp ecification
04/30124291 DC,
2004/30124291 DC
ISO 21573-1. Building construction machinery and equipment. Concrete
pumps. Part 1. Definitions and commercial specifications
04/30124987 DC,
2004/30124987 DC
EN 1090-1. Steel and aluminium structural components. Part 1. General
delivery conditions
05/30081113 DC
ISO 140-18. Acoustics. Measurement of sound insulation and of building
elements. Part 18. Laboratory measurement of sound generated by
rainfall on building elements
05/30128728 DC
EN 14255-4. Measurement and assessment of personal exposures to
incoherent optical radiation. Part 4. Terminology and quantities used in
UV, visib le and IP-exposure measurements
05/30129304 DC
ISO DIS 13786. Thermal performance of building components. Dynamic
thermal characteristics. Calculation methods
05/30132920 DC
EN 1090-2. Execution of steel structures and aluminium structures. Part
2. Technical requirements for the execution of steel structures
05/30134647 DC
EN 15255. Thermal performance of buildings. Sensible room cooling
load calculation. General criteria and validation procedures
05/30135982 DC
BS 715. Specification for metal flue boxes for gas fired appliances not
exceeding 20 kW
93/102674 DC
prEN 1015-13. Methods of test for mortar for masonry. Part 13.
Determination of dimensional stability of hardened mortars
95/102829 DC
prEN 1881-1. Products and systems for the protection and repair of
concrete structures. Test methods. Part 1. Pull-out test. Uncracked
concrete
95/104912 DC
Bases for design of structures. Accidental actions due to human activities
(ISO/DIS 10252)
95/105441 DC
prEN ISO 13791. Thermal performance of buildings. Internal
temperatures in summer of a room without mechanical cooling. General
criteria and calcu lation procedures
96/104019 DC
prEN 503. Roofing products from metal sheet. Specification for fully
supported roofing products of lead sheet
96/104605 DC prEN 12446. Specification for concrete chimney outer wall elements
96/107552 DC Truckmixers. Safety requirements (prEN 12609)
96/108457 DC
prEN 12650-2. Building hardware. Powered pedestrian doors. Part 2.
Safety at powered pedestrian doors
96/108458 DC
prEN 12650-1. Building hardware. Powered pedestrian doors. Part 1.
Product requirements and test methods
96/108703 DC
prEN 12652. Industrial, commercial and garage doors and gates. Sound
reduction. Requirements and classification
97/108355 DC
Hydrothermal performance of buildings. Climatic data. Part 3.
Calculation of a driving rain index for vertical surfaces from hourly wind
and rain data
90 158
97/202078 DC
IEC publication 61819. Test parameters simulating the effects on
lightning protection systems (L.P.S.) components. International document
81/88/CD
98/263048 DC
IEC 61024-1. Protection of structures against lightning. Part 1. General
principles (International document 81/122/CD)
99/716714 DC
prEN 12629-6. Machines for the manufacture of constructional products
from concrete and calcium-silicate. Safety. Part 6. Stationary and mobile
eq uipment for the manufacture of precast reinforced products
BIP 2022:2003 Building Services Handbook. 2nd edition
BIP 2023:2003 The Building Regulations Explained & Illustrated. 12th edition
BIP 2027:2004 The JCT Major Projects Form
BIP 2029:2003 Construction Safety. Questions and answers. A Practical approach
BIP 2030:2002 CDM. Questions and Answers. A Practical approach. 2nd edition
BIP 2048:2004
Buildings and constructed assets: Service life planning. Part 5. Whole life
costing. (ISO DIS as BIP special)
BIP 2065:2004 Building Regulations 2000. Approved Document M
BIP 2066:2004 Defects in Buildings. Symptoms, investigation, diagnosis and cure
BS 1139-1.2:1990 Metal scaffolding. Tubes. Specification for aluminium tube
BS 1139-2.2:1991
Metal scaffolding. Couplers. Specification for steel and aluminium
couplers, fittings and accessories for use in tubular scaffolding
BS 1245:1975 Specification for metal door frames (steel)
BS 1305:1974 Specification for batch type concrete mixers
BS 1567:1953 Specification for wood door frames and linings
BS 1707:1989 Specification for hot binder distributors for road surface dressing
BS 1722-1:1999 Fences. Specification for chain link fences
BS 1722-10:1999
Fences. Specification for anti-intruder fences in chain link and welded
mesh
BS 1722-11:2000 Fences. Specification for prefabricated wood panel fences
BS 1722-12:1999 Fences. Specification for steel palisade fences
BS 1722-13:1978 Fences. Chain link fences for tennis court surrounds
BS 1722-14:2001 Fences. Specification for open mesh steel panel fences
BS 1722-2:2000 Fences. Specification for strained wire and wire mesh netting fences
BS 1722-4:1986 Fences. Specification for cleft chestnut pale fences
BS 1722-5:1999 Fences. Specification for close-boarded and wooden palisade fences
BS 1722-7:1999 Fences. Specification for wooden post and rail fences
BS 1722-8:1997
Fences. Specification for mild steel (low carbon steel) continuous bar
fences and hurdles
BS 1722-9:2000
Fences. Specification for mild steel (low carbon steel) fences with round
or square verticals and flat horizontals
BS 2482:1981 Specification for timber scaffold boards
BS 2832:1957 Specification for hot applied damp resisting coatings for solums
BS 3187:1978 Specification for electrically conducting rubber flooring
BS 3470:1975 Specification for field gates and posts
BS 3963:1974 Method for testing the mixing performance of concrete mixers
BS 4074:2000 Specification for steel trench struts
91 158
BS 4076:1989 Specification for steel chimneys
BS 4092-1:1996
Specification for domestic front entrance gates. Specification for metal
gates
BS 41:1973
Specification for cast iron spigot and socket flue or smoke pipes and
fittings
BS 4207:1989
Code of practice for the installation of monolithic linings for steel
chimneys and flues
BS 449-2:1969 Specification for the use of structural steel in building. Metric units
BS 4576-1:1989
Unplasticized polyvinyl chloride (PVC-U) rainwater goods and
accessories. Half-round gutters and pipes of circular cross-section
BS 459:1988 Specification for matchboarded wooden door leaves for external use
BS 460:2002 Cast iron rainwater goods. Specification
BS 4873:2004 Aluminium alloy windows
BS 493:1995 Specification for airbricks and gratings for wall ventilation
BS 5234-1:1992
Partitions (including matching linings). Code of practice for design and
installation
BS 5234-2:1992
Partitions (including matching linings). Specification for performance
requirements for strength and robustness including methods of test
BS 5268-6.1:1996
Dwellings not exceeding four storeys
BS 5268-6.2:2001
Buildings other than dwellings not exceeding four storeys
BS 5268-7.4:1989 Structural use of timber. Ceiling binders
BS 5268-7.6:1990
Structural use of timber. Recommendations for the calculation basis for
span tables. Purlins supporting rafters
BS 5385-2:1991
external ceramic wall tiling and mosaics (including terra cotta and fai
ence tiles)
BS 5385-4:1992
Wall and floor tiling. Code of practice for tiling and mosaics in specific
conditions
BS 5385-5:1994
terrazzo tile and slab, natural stone and composition block floorings
BS 5427-1:1996
Code of practice for the use of profiled sheet for roof and wall cladding
on buildings. Design
BS 5440-1:2000
Installation and maintenance of flues and ventilation for gas appliances of
rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases). S
pecification for installation and maintenance of flues
BS 5440-2:2000
Installation and maintenance of flues and ventilation for gas appliances of
rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases). S
pecification for installation and maintenance of ventilation for gas
appliances
BS 5531:1988 Code of practice for safety in erecting structural frames
BS 5534:2003 Code of practice for slating and tiling (including shingles)
92 158
BS 5628-3:2001
Code of practice for use of masonry. Materials and components, design
and workmanship
BS 5642-1:1978
Sills and copings. Specification for window sills of precast concrete, cast
stone, clayware, slate and natural stone
BS 5642-2:1983
Sills and copings. Specification for copings of precast concrete, cast
stone, clayware, slate and natural stone
BS 567:1973 Specification for asbestos-cement flue pipes and fittings, light quality
BS 5709:2001 Gaps, gates and stiles. Specification
BS 5930:1999 Code of practice for site investigations
BS 5950-1:2000
Structural use of steelwork in building. Code of practice for design.
Rolled and welded sections
BS 5950-2:2001
Structural use of steelwork in building. Specification for materials,
fabrication and erection. Rolled and welded sections
BS 5950-3.1:1990
Structural use of steelwork in building. Design in composite construction.
Code of practice for design of simple and continuous composite beams
BS 5950-4:1994
composite slabs with profiled steel sheeting
BS 5950-5:1998
cold formed thin gauge sections
BS 5950-6:1995
light gauge profiled steel sheeting
BS 5950-7:1992
Structural use of steelwork in building. Specification for materials and
workmanship: cold formed sections
BS 5950-9:1994
Structural use of steelwork in building. Code of practice for stressed skin
design
BS 5964-2:1996, ISO
4463-2:1995
Building setting out and measurement. Measuring stations and targets
BS 5964-3:1996, ISO
4463-3:1995
Building setting out and measurement. Check-lists for the procurement of
surveys and measurement services
BS 5974:1990
Code of practice for temporarily installed suspended scaffolds and access
equipment
BS 5975:1996 Code of practice for falsework
BS 6093:1993 Code of practice for design of joints and jointing in building construction
BS 6177:1982
Guide to selection and use of elastomeric bearings for vibration isolation
of buildings
BS 6180:1999 Barriers in and about buildings. Code of practice
BS 6181:1981, ISO
6589-1981
Method of test for air permeability of joints in building
BS 6187:2000 Code of practice for demolition
BS 6229:2003 Flat roofs with continuously supported coverings. Code of practice
BS 6263-2:1991
Care and maintenance of floor surfaces. Code of practice for resilient
sheet and tile flooring
BS 6270-3:1991
Code of practice for cleaning and surface repair of buildings. Metals
(cleaning only)
93 158
BS 6375-1:2004
Performance of windows. Classification for weathertightness and
guidance on selection and specification
BS 6398:1983 Specification for bitumen damp-proof courses for masonry
BS 6399-1:1996 Loading for buildings. Code of practice for dead and imposed loads
BS 6399-2:1997 Loading for buildings. Code of practice for wind loads
BS 6399-3:1988 Loading for buildings. Code of practice for imposed roof loads
BS 644:2003
Timber windows. Factory assembled windows of various types.
Specification
BS 6461-1:1984
Installation of chimneys and flues for domestic appliances burning solid
fuel (including wood and peat). Code of practice for masonry chimneys
and flue pipes
BS 6510:2005 Steel-framed windows and glazed doors
BS 6767-2:1998
Transportable accommodation units. Recommendations for design and
installation of services and fittings with guidance on transportation, siting
an d aspects relating to habitation
BS 6915:2001
Design and construction of fully supported lead sheet roof and wall
coverings. Code of practice
BS 6954-1:1988, ISO
3443-1:1979
Tolerances for building. Recommendations for basic principles for
evaluation and specification
BS 6954-3:1988, ISO
3443-3:1987
Tolerances for building. Recommendations for selecting target size and
predicting fit
BS 7036-3:1996
Code of practice for safety at powered doors for pedestrian use. Swing
doors and balanced doors
BS 7036-5:1996
Code of practice for safety at powered doors for pedestrian use.
Revolving doors
BS 7334-1:1990, ISO
8322-1:1989
Measuring instruments for building construction. Methods for
determining accuracy in use: theory
BS 7334-2:1990, ISO
8322-2:1989
determining accuracy in use: measuring tapes
BS 7334-3:1990, ISO
8322-3:1989
determining accuracy in use: optical levelling instruments
BS 7334-4:1992, ISO
8322-4:1991
determining accuracy in use of theodolites
BS 7334-5:1992, ISO
8322-5:1991
determining accuracy in use of optical plumbing instruments
BS 7334-6:1992, ISO
8322-6:1991
determining accuracy in use of laser instruments
BS 7334-7:1992, ISO
8322-7:1991
determining accuracy in use of instruments when used for setting out
BS 7386:1997
Specification for draughtstrips for the draught control of existing doors
and windows in housing (including test methods)
BS 7543:2003
Guide to durability of buildings and building elements, products and
components
BS 7608:1993 Code of practice for fatigue design and assessment of steel structures
94 158
BS 7641:1993, ISO
9836:1992
Performance standards in building. Definition and calculation of area and
space indicators
BS 7642:1993, ISO
7162:1992
Performance standards in building. Contents and format of standards for
evaluation of performance
BS 7913:1998 Guide to the principles of the conservation of historic buildings
BS 8000-1:1989
Workmanship on building sites. Code of practice for excavation and
filling
BS 8000-10:1995
Workmanship on building sites. Code of practice for plastering and
rendering
BS 8000-11.2:1990
Workmanship on building sites. Code of practice for wall and floor
tiling. Natural stone tiles
BS 8000-12:1989
Workmanship on building sites. Code of practice for decorative
wallcoverings and painting
BS 8000-13:1989
Workmanship on building sites. Code of practice for above ground
drainage and sanitary appliances
BS 8000-14:1989
Workmanship on building sites. Code of practice for below ground
drainage
BS 8000-15:1990
Workmanship on building sites. Code of practice for hot and cold water
services (domestic scale)
BS 8000-2.1:1990
Workmanship on building sites. Code of practice for concrete work.
Mixing and transporting concrete
BS 8000-3:2001 Workmanship on building sites. Code of practice for masonry
BS 8000-4:1989 Workmanship on building sites. Code of practice for waterproofing
BS 8000-5:1990
Workmanship on building sites. Code of practice for carpentry, joinery
and general fixings
BS 8000-6:1990
Workmanship on building sites. Code of practice for slating and tiling of
roofs and claddings
BS 8000-7:1990 Workmanship on building sites. Code of practice for glazing
BS 8000-8:1994
Workmanship on building sites. Code of practice for plasterboard
partitions and dry linings
BS 8000-9:2003
Workmanship on building sites. Cementitious levelling screeds and
wearing screeds. Code of practice
BS 8007:1987
Code of practice for design of concrete structures for retaining aqueous
liquids
BS 8100-1:1986 Lattice towers and masts. Code of practice for loading
BS 8100-4:1995 Lattice towers and masts. Code of practice for loading of guyed masts
BS 8102:1990 Code of practice for protection of structures against water from the
BS 8103-2:2005
walls for housing
BS 8103-3:1996
Structural design of low-rise buildings. Code of practice for timber floors
and roofs for housing
BS 8103-4:1995
Structural design of low-rise buildings. Code of practice for suspended
concrete floors for housing
BS 8104:1992 Code of practice for assessing exposure of walls to wind-driven rain
95 158
BS 8110-3:1985
Structural use of concrete. Design charts for singly reinforced beams,
doubly reinforced beams and rectangular columns
BS 8200:1985
Code of practice for design of non-loadbearing external vertical
enclosures of buildings
BS 8201:1987
Code of practice for flooring of timber, timber products and wood based
panel products
BS 8204-1:2003
Screeds, bases and in-situ floorings. Concrete bases and cement sand
levelling screeds to receive floorings. Code of practice
BS 8204-2:2003
Screeds, bases and in-situ floorings. Concrete wearing surfaces. Code of
practice
BS 8204-3:2004
Screeds, bases and in-situ floorings. Polymer modified cementitious
levelling screeds and wearing screeds. Code of practice
BS 8204-5:2004
Screeds, bases and in-situ floorings. Mastic asphalt underlays and
wearing surfaces. Code of practice
BS 8204-7:2003
Screeds, bases and in-situ floorings. Pumpable self-smoothing screeds.
Code of practice
BS 8208-1:1985
Guide to assessment of suitability of external cavity walls for filling with
thermal insulants. Existing traditional cavity construction
BS 8212:1995 Code of practice for dry lining and partitioning using gypsum
BS 8213-1:2004
Windows, doors and rooflights. Design for safety in use and during
cleaning of windows, including door-height windows and roof windows.
Code of pr actice
BS 8213-4:1990
Windows, doors and rooflights. Code of practice for the installation of
replacement windows and doorsets in dwellings
BS 8217:2005 Reinforced bitumen membranes for roofing. Code of practice
BS 8219:2001
Installation of sheet roof and wall coverings. Profiled fibre cement. Code
of practice
BS 8221-1:2000
Code of practice for cleaning and surface repair of buildings. Cleaning of
natural stones, brick, terracotta and concrete
BS 8221-2:2000
Code of practice for cleaning and surface repair of buildings. Surface
repair of natural stones, brick and terracotta
BS 8233:1999 Sound insulation and noise reduction for buildings. Code of practice
BS 8290-1:1991 Suspended ceilings. Code of practice for design
BS 8290-2:1991
Suspended ceilings. Specification for performance of components and
assemblies
BS 8290-3:1991 Suspended ceilings. Code of practice for installation and maintenance
BS 8297:2000
Code of practice for Design and installation of non-loadbearing precast
concrete cladding
BS 8298:1994
Code of practice for design and installation of natural stone cladding and
lining
BS 835:1973 Specification for asbestos-cement flue pipes and fittings, heavy quality
BS EN 1004:2004
Mobile access and working towers made of prefabricated elements.
Materials, dimensions, design loads, safety and performance requirements
BS EN 1052-1:1999 Methods of test for masonry. Determination of compressive strength
96 158
BS EN 1052-2:1999 Methods of test for masonry. Determination of flexural strength
BS EN 1052-3:2002 Methods of test for masonry. Determination of initial shear strength
BS EN 1052-4:2000
Methods of test for masonry. Determination of shear strength including
damp proof course
BS EN 1065:1999
Adjustable telescopic steel props. Product specifications, design and
assessment by calculation and tests
BS EN 1121:2000 Doors. Behaviour between two different climates. Test method
BS EN 1191:2000
Windows and doors. Resistance to repeated opening and closing. Test
method
BS EN 1192:2000 Doors. Classification of strength requirements
BS EN 1195:1998 Timber structures. Test methods. Performance of structural floor decking
BS EN 12001:2003
Conveying, spraying and placing machines for concrete and mortar.
Safety requirements
BS EN 12045:2000
Shutters and blinds power operated. Safety in use. Measurement of the
transmitted force
BS EN 12046-2:2000 Operating forces. Test method. Doors
BS EN 12114:2000
Thermal performance of buildings. Air permeability of building
components and building elements. Laboratory test methods
BS EN 12152:2002
Curtain walling. Air permeability. Performance requirements and
classification
BS EN 12153:2000 Curtain walling. Air permeability. Test method
BS EN 12154:2000
Curtain walling. Watertightness. Performance requirements and
classification
BS EN 12155:2000 Curtain walling. Watertightness. Laboratory test under static pressure
BS EN 12179:2000 Curtain walling. Resistance to wind load. Test method
BS EN 12188:1999
Products and systems for the protection and repair of concrete structures.
Test methods. Determination of adhesion steel-to-steel for characteriza
tion of structural bonding agents
BS EN 12189:1999
Test methods. Determination of open time
BS EN 12194:2000 Shutters, external and internal blinds. Misuse. Test methods
BS EN 12207:2000 Windows and doors. Air permeability. Classification
BS EN 12208:2000 Windows and doors. Watertightness. Classification
BS EN 12210:2000 Windows and doors. Resistance to wind load. Classification
BS EN 12217:2003 Doors. Operating forces. Requirements and classification
BS EN 12219:2000 Doors. Climatic influences. Requirements and classification
BS EN 12354-1:2000
Building acoustics. Estimation of acoustic performance in buildings from
the performance of elements. Airborne sound insulation between rooms
BS EN 12354-2:2000
the performance of elements. Impact sound insulation between rooms
BS EN 12354-3:2000
the performance of elements. Airborne sound insultation against outdoor
s ound
97 158
BS EN 12354-4:2000
the performance of elements. Transmission of indoor sound to the outside
BS EN 12354-6:2003
the performance of elements. Sound absorption in enclosed spaces
BS EN 12391-1:2003
Chimneys. Execution standard for metal chimneys. Chimneys for non-
roomsealed heating appliances
BS EN 12400:2002
Windows and pedestrian doors. Mechanical durability. Requirements and
classification
BS EN 12412-2:2003
Thermal performance of windows, doors and shutters. Determination of
thermal transmittance by hot box method. Frames
BS EN 12412-4:2003
Thermal performance of windows, doors and shutters. Determination of
thermal transmittance by hot box method. Roller shutter boxes
BS EN 12418:2000 Masonry and stone cutting-off machines for job site. Safety
BS EN 12424:2000
Industrial, commercial and garage doors and gates. Resistance to wind
load. Classification
BS EN 12425:2000
Industrial, commercial and garage doors and gates. Resistance to water
penetration. Classification
BS EN 12426:2000
Industrial, commercial and garage doors and gates. Air permeability.
Classification
BS EN 12427:2000
Industrial, commercial and garage doors and gates. Air permeability. Test
method
BS EN 12428:2000
Industrial, commercial and garage doors and gates. Thermal
transmittance. Requirements for the calculation
BS EN 12444:2001
Industrial, commercial and garage doors and gates. Resistance to wind
load. Testing and calculation
BS EN 12445:2001
Industrial, commercial and garage doors and gates. Safety in use of
power operated doors. Test methods
BS EN 12446:2003 Chimneys. Components. Concrete outer wall elements
BS EN 12453:2001
Industrial, commercial and garage doors and gates. Safety in use of
power operated doors. Requirements
BS EN 12489:2000
Industrial, commercial and garage doors and gates. Resistance to water
penetration. Test method
BS EN 12604:2000
Industrial, commercial and garage doors and gates. Mechanical aspects.
Requirements
BS EN 12605:2000
Industrial, commercial and garage doors and gates. Mechanical aspects.
Test methods
BS EN 12614:2004
Test methods. Determination of glass transition temperatures of polymer
s
BS EN 12615:1999
Test methods. Determination of slant shear strength
BS EN 12617-1:2003
Test methods. Determination of linear shrinkage for polymers and surfac
e protection systems (SPS)
98 158
BS EN 12617-3:2002
Test methods. Determination of early age linear shrinkage for structura l
bonding agents
BS EN 12617-4:2002
Test methods. Determination of shrinkage and expansion
BS EN 12618-1:2003
Test methods. Adhesion and elongation capacity of injection products wi
th limited ductility
BS EN 12618-3:2004
Test methods. Determination of the adhesion of injection products, with
or without thermal cycling. Slant shear method
BS EN 12629-1:2001
Machines for the manufacture of constructional products from concrete
and calcium-silicate. Safety. Common requirements
BS EN 12629-2:2002
and calcium-silicate. Safety. Block making machines
BS EN 12629-3:2002
and calcium-silicate. Safety. Slide and turntable machines
BS EN 12629-4:2001
and calcium-silicate. Safety. Concrete and tile making machines
BS EN 12629-5.4:2003
and calcium-silicate. Safety. Concrete pipe coating machines
BS EN 12629-5-1:2003
and calcium-silicate. Safety. Pipe making machines manufacturing in the
vert ical axis
BS EN 12629-5-2:2003
and calcium-silicate. Safety. Pipe making machines manufacturing in the
hori zontal axis
BS EN 12629-5-3:2003
and calcium-silicate. Safety. Pipe prestressing machines
BS EN 12629-7:2004
and calcium-silicate. Safety. Stationary and mobile equipment for long
line manufacture of prestressed products
BS EN 12629-8:2002
and calcium-silicate. Safety. Machines and equipment for the
manufacture of constructional products from calcium-silicate (and
concrete)
BS EN 12635:2002 Industrial, commercial and garage doors and gates. Installation and use
BS EN 12636:1999
Test methods. Determination of adhesion concrete to concrete
BS EN 12637-1:2004
Test methods. Compatibility of injection products. Compatibility with c
oncrete
BS EN 12637-3:2003
Test methods. Compatibility of injection products. Effect of injection
products on elastomers
99 158
BS EN 12810-1:2003
Facade scaffolds made of prefabricated components. Products
specifications
BS EN 12810-2:2003
Facade scaffolds made of prefabricated components. Particular methods
of structural design
BS EN 12811-1:2003
Temporary works equipment. Scaffolds. Performance requirements and
general design
BS EN 12811-2:2004 Temporary works equipment. Information on materials
BS EN 12811-3:2002 Temporary works equipment. Load testing
BS EN 12812:2004 Falsework. Performance requirements and general design
BS EN 12813:2004
Temporary works equipment. Load bearing towers of prefabricated
components. Particular methods of structural design
BS EN 12825:2001 Raised access floors
BS EN 12833:2001
Skylight and conservatory roller shutters. Resistance to snow load. Test
method
BS EN 12835:2001 Airtight shutters. Air permeability test
BS EN 12865:2001
Hygrothermal performance of building components and building
elements. Determination of the resistance of external wall systems to
driving rain un der pulsating air pressure
BS EN 1294:2000
Door leaves. Determination of the behaviour under humidity variations in
successive uniform climates
BS EN 12978:2003
Industrial, commercial and garage doors and gates. Safety devices for
power operated doors and gates. Requirements and test methods
BS EN 1298:1996
Mobile access and working towers. Rules and guidelines for the
preparation of an instruction manual
BS EN 13020:2004 Road surface treatment machines. Safety requirements
BS EN 13049:2003
Windows. Soft and heavy body impact. Test method, safety requirements
and classification
BS EN 13051:2001 Curtain walling. Watertightness. Site test
BS EN 13057:2002
Test methods. Determination of resistance of capillary absorption
BS EN 13062:2003
Test method. Determination of thixotropy of products for protection of
reinforcement
BS EN 13084-1:2000
Free-standing industrial chimneys. Free-standing industrial chimneys.
BS EN 13084-2:2001 Free-standing industrial chimneys. Concrete chimneys
BS EN 13084-4:2002 Free-standing industrial chimneys. Brick liners. Design and execution
BS EN 13084-6:2004 Free-standing chimneys. Steel liners. Design and execution
BS EN 13084-8:2005
Free-standing industrial chimneys. Design and execution of mast
construction with satellite components
BS EN 13115:2001
Windows. Classification of mechanical properties. Racking, torsion and
operating forces
BS EN 13116:2001 Curtain walling. Resistance to wind load. Performance requirements
BS EN 13120:2004 Internal blinds. Performance requirements including safety
100 158
BS EN 13125:2001
Shutters and blinds. Additional thermal resistance. Allocation of a class
of air permeability to a product
BS EN 13187:1999
Thermal performance of buildings. Qualitative detection of thermal
irregularities in building envelopes. Infrared method
BS EN 13213:2001 Hollow floors
BS EN 13216-1:2004 Chimneys. Test methods for system chimneys. General test methods
BS EN 13241-1:2003
Industrial, commercial and garage doors and gates. Product standard.
Products without fire resistance or smoke control characteristics
BS EN 13294:2002
Test methods. Determination of stiffening time
BS EN 13295:2004
Test methods. Determination of resistance to carbonation
BS EN 13330:2002 Shutters. Hard body impact. Test method
BS EN 1337-1:2000 Structural bearings. General design rules
BS EN 1337-10:2003 Structural bearings. Inspection and maintenance
BS EN 1337-11:1998 Structural bearings. Transport, storage and installation
BS EN 13374:2004 Temporary edge protection systems. Product specification, test methods
BS EN 1337-4:2004 Structural bearings. Roller bearings
BS EN 1337-6:2004 Structural bearings. Rocker bearings
BS EN 13377:2002
Prefabricated timber formwork beams. Requirements, classification and
assessment
BS EN 1337-9:1998 Structural bearings. Protection
BS EN 13384-1:2002
Chimneys. Thermal and fluid dynamic calculation methods. Chimneys
serving one appliance
BS EN 13384-2:2003
Chimneys. Thermal and fluid dynamic calculation methods. Chimneys
serving more than one heating appliance
BS EN 13391:2004 Mechanical tests for post-tensioning systems
BS EN 13396:2004
Test methods. Measurement of chloride ion ingress
BS EN 13412:2002
Test methods. Determination of modulus of elasticity in compression
BS EN 13502:2002 Chimneys. Requirements and test methods for clay/ceramic flue
BS EN 13527:2000 Shutters and blinds. Measurement of operating force. Test methods
BS EN 13529:2003
Test methods. Determination of resistance to severe chemical attack
BS EN 13561:2004 External blinds. Performance requirements including safety
BS EN 13578:2003
Products and systems for the protection and repair of concrete structure.
Test method. Compatibility on wet concrete
BS EN 13584:2003
Test methods. Determination of creep in compression for repair products
BS EN 13659:2004 Shutters. Performance requirements including safety
BS EN 13741:2003
Thermal performance acceptance testing of mechanical draught series
wet cooling towers
BS EN 1380:1999 Timber structures. Test methods. Load bearing nailed joints
101 158
BS EN 1381:1999 Timber structures. Test methods. Load bearing stapled joints
BS EN 13813:2002
Screed material and floor screeds. Screed material. Properties and
requirements
BS EN 1382:1999 Timber structures. Test methods. Withdrawal capacity of timber fasteners
BS EN 1383:1999
Timber structures. Test methods. Pull-through resistance of timber
fasteners
BS EN 13830:2003 Curtain walling. Product standard
BS EN 13862:2001 Floor cutting-off machines. Safety
BS EN 13892-5:2003
Methods of test for screed materials. Determination of wear resistance to
rolling wheel of screed material for wearing layer
BS EN 13894-2:2002
Test methods. Determination of fatigue under dynamic loading. After har
dening
BS EN 13964:2004 Suspended ceilings. Requirements and test methods
BS EN 14019:2004 Curtain walling. Impact resistance. Performance requirements
BS EN 14024:2004
Metal profiles with thermal barrier. Mechanical performance.
Requirements, proof and tests for assessment
BS EN 14114:2002
Hygrothermal performance of building equipment and industrial
installations. Calculation of water vapour diffusion. Cold pipe insulation
systems
BS EN 14117:2004
Test methods. Determination of time of efflux of cementitious injection
products
BS EN 14201:2004
Blinds and shutters. Resistance to repeated operations (mechanical
endurance). Methods of testing
BS EN 14202:2004
Blinds and shutters. Suitability for use of tubular and square
motorizations. Requirements and test methods
BS EN 14203:2004
Blinds and shutters. Capability for use of gears with crank handle.
BS EN 14250:2004
Timber structures. Product requirements for prefabricated structural
members assembled with punched metal plate fasteners
BS EN 14297:2004 Chimneys. Freeze-thaw resistance test method for chimney products
BS EN 14406:2004
Test methods. Determination of the expansion ratio and expansion evolut
ion
BS EN 1443:2003 Chimneys. General requirements
BS EN 1457:1999 Chimneys. Clay/ceramic flue liners. Requirements and test methods
BS EN 14608:2004 Windows. Determination of the resistance to racking
BS EN 14609:2004 Windows. Determination of the resistance to static torsion
BS EN 1462:1997 Brackets for eaves gutters. Requirements and testing
BS EN 14716:2004 Stretched ceilings. Requirements and test methods
BS EN 14759:2005
Shutters. Acoustic insulation relative to airborne sound. Expression of
performance
102 158
BS EN 1504-4:2004
Definitions, requirements, quality control and evaluation of conformity .
Structural bonding
BS EN 1504-5:2004
Concrete injection
BS EN 1504-8:2004
Quality control and evaluation of conformity
BS EN 1529:2000 Door leaves. Height, width, thickness and squareness. Tolerance classes
BS EN 1530:2000 Door leaves. General and local flatness. Tolerance classes
BS EN 1542:1999
Test methods. Measurement of bond strength by pull-off
BS EN 1745:2002
Masonry and masonry products. Methods for determining design thermal
values
BS EN 1767:1999
Test methods. Infrared analysis
BS EN 1770:1998
Test methods. Determination of the coefficient of thermal expansion
BS EN 1856-1:2003 Chimneys. Requirements for metal chimneys. System chimney products
BS EN 1856-2:2004
Chimneys. Requirements for metal chimneys. Metal liners and
connecting flue pipes
BS EN 1859:2000 Chimneys. Metal chimneys. Test methods
BS EN 1877-1:2000
Test methods. Reactive functions related to epoxy resins. Determination
of epoxy equivalent
BS EN 1877-2:2000
Test methods. Reactive functions related to epoxy resins. Determination
of amine functions using the total basicity number
BS EN 1932:2001 External blinds and shutters. Resistance to wind loads. Method of testing
BS EN 1933:1999
Exterior blinds. Resistance to load due to water accumulation. Test
method
BS EN 1990:2002 Eurocode. Basis of structural design
BS EN 1990:2002
(Package)
Eurocode. Basis of structural design. Compilation of BS EN 1990:2002
and the National Annex
BS EN 1991-1-1:2002
Eurocode 1. Actions on structures. General actions. Densities, self-
weight, imposed loads for buildings
BS EN 1991-1-4:2005 Eurocode 1. Actions on structures. General actions. Wind actions
BS EN 1991-1-5:2003 Eurocode 1. Actions on structures. General actions. Thermal actions
BS EN 1993-1-1:2005
Eurocode 3. Design of steel structures. General rules and rules for
buildings
BS EN 1993-1-10:2005
Eurocode 3. Design of steel structures. Material toughness and through-
thickness properties
BS EN 1993-1-8:2005 Eurocode 3. Design of steel structures. Design of joints
103 158
BS EN 1993-1-9:2005 Eurocode 3. Design of steel structures. Fatigue
BS EN 1994-1-1:2004
Eurocode 4. Design of composite steel and concrete structures. General
rules and rules for buildings
BS EN 1995-1-1:2004
Eurocode 5. Design of timber structures. Common rules and rules for
buildings
BS EN 1997-1:2004 Eurocode 7. Geotechnical design. General rules
BS EN 1998-1:2004
Eurocode 8. Design of structures for earthquake resistance. General rules,
seismic actions and rules for buildings
BS EN 1998-5:2004
Eurocode 8. Design of structures for earthquake resistance. Foundations,
retaining structures and geotechnical aspects
BS EN 20140-10:1992,
ISO 140-10:1991
Acoustics. Measurement of sound insulation in buildings and of building
elements. Laboratory measurement of airborne sound insulation of small
bui lding elements
BS EN 20140-2:1993,
BS 2750-2:1993, ISO
140-2:1991
Determination, verification and application of precision data
BS EN 39:2001
Loose steel tubes for tube and coupler scaffolds. Technical delivery
conditions
BS EN 500-1:1996 Mobile road construction machinery. Safety. Common requirements
BS EN 500-2:1996
Mobile road construction machinery. Safety. Specific requirements for
road-milling machines
BS EN 500-3:1996
soil stabilization machines
BS EN 500-4:1996
compaction machines
BS EN 501:1994
Roofing products from metal sheet. Specifications for fully supported
roofing products of zinc sheet
BS EN 50164-1:2000
Lightning protection components (LPC). Requirements for connection
components
BS EN 50164-2:2002
Lightning protection components (LPC). Requirements for conductors
and earth electrodes
BS EN 506:2000
Roofing products from metal sheet. Specification for self-supporting
products of copper or zinc sheet
BS EN 508-2:2000
products of steel, aluminium or stainless steel sheet. Aluminium
BS EN 508-3:2000
products of steel, aluminium or stainless steel sheet. Stainless steel
BS EN 516:1995
Prefabricated accessories for roofing. Installations for roof access.
Walkways, treads and steps
BS EN 517:1995 Prefabricated accessories for roofing. Roof safety hooks
BS EN 536:1999 Road construction machines. Asphalt mixing plants. Safety requirements
BS EN 594:1996
Timber structures. Test methods. Racking strength and stiffness of timber
frame wall panels
104 158
BS EN 607:1996
Eaves gutters and fittings made of PVC-U. Definitions, requirements and
testing
BS EN 612:2005
Eaves gutters with bead stiffened fronts and rainwater pipes with seamed
joints made of metal sheet
BS EN 791:1996 Drill rigs. Safety
BS EN 845-1:2003
Specification for ancillary components for masonry. Ties, tension straps,
hangers and brackets
BS EN 845-2:2003 Specification for ancillary components for masonry. Lintels
BS EN 845-3:2003
Specification for ancillary components for masonry. Bed joint
reinforcement of steel meshwork
BS EN 846-10:2000
Methods of test for ancillary components for masonry. Determination of
load capacity and load deflection characteristics of brackets
BS EN 846-11:2000
dimensions and bow of lintels
BS EN 846-13:2001
resistance to impact, abrasion and corrosion of organic coatings
BS EN 846-2:2000
bond strength of prefabricated bed joint reinforcement in mortar joints
BS EN 846-3:2000
shear load capacity of welds in prefabricated bed joint reinforcement
BS EN 846-5:2000
tensile and compressive load capacity and load displacement
characteristics of wall ties (couplet test)
BS EN 846-6:2000
tensile and compressive load capacity and load displacement
characteristics of wall ties (single end test)
BS EN 846-7:2000
shear load capacity and load displacement characteristics of shear ties
and slip ties (couplet test for mortar joint connection)
BS EN 846-8:2000
load capacity and load-deflection characteristics of joist hangers
BS EN 846-9:2000
flexural resistance and shear resistance of lintels
BS EN 947:1999 Hinged or pivoted doors. Determination of the resistance to vertical load
BS EN 948:1999 Hinged or pivoted doors. Determination of the resistance to static torsion
BS EN 949:1999
Windows and curtain walling, doors, blinds and shutters. Determination
of the resistance to soft and heavy body impact for doors
BS EN 950:1999 Door leaves. Determination of the resistance to hard body impact
BS EN 951:1999
Door leaves. Method for measurement of height, width, thickness and
squareness
BS EN 952:1999 Door leaves. General and local flatness. Measurement method
BS EN ISO 10077-
1:2000
Thermal performance of windows, doors and shutters. Calculation of
thermal transmittance. Simplified method
105 158
BS EN ISO 10077-
2:2003
Thermal performance of windows, doors and shutters. Calculation of
thermal transmittance. Numerical method for frames
BS EN ISO 12567-
1:2000
Thermal performance of windows and doors. Determination of thermal
transmittance by hot box method. Complete windows and doors
BS EN ISO 12569:2001
Thermal insulation in buildings. Determination of air change in buildings.
Tracer gas dilution method
BS EN ISO 13786:1999
Thermal performance of building components. Dynamic thermal
characteristics. Calculation methods
BS EN ISO 13788:2002
Hygrothermal performance of building components and building
elements. Internal surface temperature to avoid critical surface humidity
and interst itial condensation. Calculation methods
BS EN ISO 13789:1999
Thermal performance of buildings. Transmission heat loss coefficient.
Calculation method
BS EN ISO 140-1:1998
elements. Requirements for laboratory test facilities with suppressed flan
king transmission
BS EN ISO 140-
12:2000
elements. Laboratory measurement of room-to-room airborne and impact
sound insulation of an access floor
BS EN ISO 140-
14:2004
elements. Guidelines for special situations in the field
BS EN ISO 140-3:1995,
BS 2750-3:1995
elements. Laboratory measurement of airborne sound insulation of
building elements
BS EN ISO 140-4:1998
elements. Field measurements of airborne sound insulation between
rooms
BS EN ISO 140-5:1998
elements. Field measurements of airborne sound insulation of facade
elemen ts and facades
BS EN ISO 140-6:1998
elements. Laboratory measurements of impact sound insulation of floors
BS EN ISO 140-7:1998
elements. Field measurements of impact sound insulation of floors
BS EN ISO 140-8:1998
elements. Laboratory measurements of the reduction of transmitted
impact n oise by floor coverings on a heavyweight standard floor
BS EN ISO 15186-
1:2003
elements using sound intensity. Laboratory measurements
BS EN ISO 15927-
1:2003
Hygrothermal performance of buildings. Calculation and presentation of
climatic data. Monthly means of single meteorological elements
BS EN ISO 3382:2000
Acoustics. Measurement of the reverberation time of rooms with
reference to other acoustical parameters
BS EN ISO 354:2003 Acoustics. Measurement of sound absorption in a reverberation room
106 158
BS EN ISO 7235:2003
Acoustics. Laboratory measurement procedures for ducted silencers and
air-terminal units. Insertion loss, flow noise and total pressure loss
BS ISO 12006-2:2001
Building construction. Organization of information about construction
works. Framework for classification of information
BS ISO 15186-2:2003
elements using sound intensity. Field measurements
BS ISO 15186-3:2002
elements using sound intensity. Laboratory measurements at low
frequencies
BS ISO 15643:2002
Road construction and maintenance equipment. Bituminous binder
spreaders/sprayers. Terminology and commercial specifications
BS ISO 15644:2002
Road construction and maintenance equipment. Chippings spreaders.
Terminology and commercial specifications
BS ISO 15645:2002
Road construction and maintenance equipment. Road milling machinery.
Terminology and commercial specifications
BS ISO 15686-1:2000 Buildings and constructed assets. Service life planning. General
BS ISO 15686-2:2001
Buildings and constructed assets. Service life planning. Service life
prediction procedures
BS ISO 15686-3:2002
Buildings and constructed assets. Service life planning. Performance
audits and reviews
BS ISO 15686-6:2004
Buildings and constructed assets. Service life planning. Procedures for
considering environmental impacts
BS ISO 15928-1:2003 Houses. Description of performance. Structural safety
BS ISO 17497-1:2004
Acoustics. Sound-scattering properties of surfaces. Measurement of the
random-incidence scattering coefficient in a reverberation room
CP 143-5:1964
Code of practice for sheet roof and wall coverings. Code of practice for
sheet roof and wall coverings. Zinc
CP 151-1:1957 Doors and windows including frames and linings. Wooden doors
CWA 14646:2003
Requirements for the installation of post-tensioning kits for prestressing
of structures and qualification of the specialist company and its perso
nnel
DD 140-2:1987 Wall ties. Recommendations for design of wall ties
DD 171:1987
Guide to specifying performance requirements for hinged or pivoted
doors (including test methods)
DD 237:1996, ISO/TR
12603:1996
Building construction machinery and equipment. Classification
DD 86-1:1983
Damp-proof courses. Methods of test for flexural bond strength and short
term shear strength
DD 86-2:1984 Damp-proof courses. Method of test for creep deformation
DD 86-3:1990
Damp-proof courses. Guide to characteristic strengths of damp-proof
course material used in masonry
DD CEN/TS 14038-
1:2004
Electrochemical realkalization and chloride extraction treatments for
reinforced concrete. Realkalization
DD ENV 1090-1:1998
Execution of steel structures. General rules and rules for buildings
(together with United Kingdom national application document)
107 158
DD ENV 1090-4:2001
Execution of steel structures. Supplementary rules for hollow section
structures
DD ENV 13050:2001
Curtain walling. Watertightness. Laboratory test under dynamic condition
of air pressure and water spray
DD ENV 13420:2000 Windows. Behaviour between different climates. Test method
DD ENV 13670-1:2000 Execution of concrete structures. Common
DD ENV 1991-2-
6:2000
Basis of design and actions on structures. Actions on structures. Actions
during execution
DD ENV 1991-4:1996
Eurocode 1. Basis of design and actions on structures. Actions in silos
and tanks
DD ENV 1992-4:2000
Eurocode 2. Design of concrete structures. Liquid retaining and
containing structures (together with United Kingdom National
Application Document)
DD ENV 1993-1-
3:2001
Eurocode 3. Design of steel structures. General rules. Supplementary
rules for cold formed thin gauge members and sheeting
DD ENV 1996-1-
1:1996
Eurocode 6. Design of masonry structures. General rules for buildings.
General rules for buildings. Rules for reinforced and unreinforced
masonry (together with United Kingdom National Application
Document)
DD ENV 1996-1-
3:2001
Eurocode 6. Design of masonry structures. General rules for buildings.
Detailed rules on lateral loading (together with United Kingdom National
Ap plication Document)
DD ENV 1996-2:2001
Eurocode 6. Design of masonry structures. Design, selection of materials
and execution of masonry (together with United Kingdom National
Applicati on Document)
DD ENV 1996-3:2001
Eurocode 6. Design of masonry structures. Simplified calculation
methods and simple rules for masonry (together with United Kingdom
National Appli cation Document)
DD ENV 1998-1-
4:1996
Eurocode 8: Design provisions for earthquake resistance of structures.
General rules. Strengthening and repair of buildings
DD ENV 1998-3:1997
Eurocode 8: Design provisions for earthquake resistance of structures.
Towers, masts and chimneys
DD ENV 1999-1-
1:2000
Eurocode 9. Design of aluminium structures. General rules. General rules
and rules for buildings
DD ENV 1999-2:2000
Eurocode 9. Design of aluminium structures. Structures susceptible to
fatigue
DD ENV 500-6:1996
paver-finishers
DD ENV 61024-1:1995 Protection of structures against lightning. General principles
EP 600 BREVe. An aid to the use of BS 6399-2:1997.
EP 915 The SCI Guide to the Amendments to BS 5950-1:2000
HB 10139:1997 Wind Loading Ready Reckoner for BS 6399:Part 2:1997
HB 10215:2002 CDM Regulations. Procedures manual. 2nd edition
KIT 11 Workmanship set (BS 8000)
KIT 14 Structural use of steelwork in building set
108 158
KIT 40 Complete service life planning pack
NA to BS EN UK national annex for Eurocode 0. Basis of structural design
PAS 1188-1:2003 Flood protection products. Specification. Building apertures
PAS 1188-2:2003
Flood protection products. Specification. Temporary and demountable
products
PAS 1188-3:2003 Flood protection products. Specification. Building skirt systems
PAS 23-1:1999
General performance requirements for door assemblies. Single leaf,
external door assemblies to dwellings
PAS 64:2005
Professional water mitigation and initial restoration of domestic
dwellings. Code of practice
PD 6446:1970
Recommendations for the co-ordination of dimensions in building.
Combinations of sizes
PD 6529:1990 Report on a new approach for design loads for buildings
PP 1990:2004
Structural Eurocodes. Guide to the Structural Eurocodes for students of
structural design
PP 5930:2002
Site investigations. Guide to BS 5930:1999 Code of practice for site
investigations, for higher education
PP 5930:2002 (Pack of
5)
Site investigations. Guide to BS 5930:1999 Code of practice for site
investigations, for higher education
PP 7312 Kit 11 Standards for teachers and students of structural design
PP 7312:2002
Structural design. Extracts from British Standards for students of
structural design
109 158
GBM49-Building Material
00/104251 DC
prEN 13897. Flexible sheets for waterproofing. Bitumen, plastic and
rubber sheets for roof waterproofing. Determination of watertightness
after st retching at low temperature
00/105249 DC
prEN 13956 Flexible sheets for waterproofing. Plastic and rubber sheets
for roof waterproofing. Definitions and characteristics
00/107874 DC
prEN 13948. Flexible sheets for waterproofing. Bitumen, plastic and
rubber sheets for roof waterproofing. Determination of resistance to root
pene tration
00/244337 DC
Electrochemical re-alkalisation and chloride extraction treatments for
reinforced concrete. Part 1. Re-alkalisation CENELEC Document prEN
14038-1
01/103190 DC
prEN 12209. Building hardware. Locks and latches. Mechanically
operated locks, latches and locking plates. Requirements and test
methods
01/121401 DC
ISO/DIS 9774. Thermal insulation for building applications. Guidelines
for selecting specification requirements
02/701821 DC
BS EN 14304. Thermal insulation products for building equipment and
industrial installations. Factory made flexible elastomeric foam (FEF)
product s. Specification
02/701822 DC
BS EN 14305. Thermal insulation products for building equipment and
industrial installations. Factory made cellular glass (CG) products.
Specifica tion
03/102562 DC
EN 179. Building hardware. Emergency exit devices operated by a lever
handle or push pad, for use on escape routes
03/102563 DC
EN 1125. Building hardware. Panic exit devices operated by a horizontal
bar, for use on escape routes. Requirements and test methods
03/118296 DC
EN 14846. Building hardware. Locks and latches. Electromechanically
operated locks and striking plates. Requirements and test methods
03/302913 DC
EN 14706. Thermal insulating products for building equipment and
industrial installations. Determination of maximum service temperature
03/310119 DC
EN 14721. Precast concrete products. Test method for metallic fibre
concrete. Measuring the fibre content in fresh and hardened concrete
03/310129 DC
EN 934-5. Admixtures for concrete, mortar and grout. Part 5. Admixtures
for sprayed concrete. Definitions, requirements and conformity
04/19983213 DC,
2004/19983213 DC
BS EN 14992. Precast concrete products. Wall elements. Products
properties and performances
04/19983215 DC,
2004/19983215 DC
BS EN 14990. Precast concrete products. Road traffic noise reducing
devices and barriers. Requirements and test methods
04/30077125 DC,
2004/30077125 DC
EN 933-11. Tests for geometrical properties of aggregates. Part 11.
Classification test for the constituents of coarse recycled aggegates
04/30110330 DC,
2004/30110330 DC
EN 14889-1. Fibres for Concrete. Part 1. Steel fibres. Definition,
specifications and conformity
04/30110333 DC,
2004/30110333 DC
EN 14889-2. Fibres for Concrete. Part 2. Polymer fibres. Definition,
specifications and conformity
110 158
05/30099595 DC
BS 8443. Specification for establishing the suitability of special purpose
concrete admixtures
05/30123177 DC
BS EN 196-10. Methods of testing cement. Part 10. Determination of the
water soluble chromium (VI) content of cement
05/30129415 DC
BS EN 480-1. Admixtures for concrete, mortar and grout. Test methods.
Part 1. Reference concrete and reference mortar for testing
05/30129418 DC
Part 2. Determination of setting time
05/30129421 DC
Part 10. Determination of water soluble chloride content
05/30136503 DC
prEN 14309. Thermal insulation products for building equipment and
industrial installations. Factory made products of expanded polystyrene
(EPS). Specification
05/30136516 DC
industrial installations. Factory made rigid polyurethane foam (PUR) and
polyis ocyanurate foam (PIR) products. Specification
05/30136538 DC
industrial installations. Factory made extruded polystyrene foam (XPS)
products . Specification
05/30136550 DC
industrial installations. Factory made phenolic foam (PF) products.
Specificati on
05/30136552 DC
industrial installations. Factory made flexible elastomeric foam (FEF).
Specifi cation
05/30136556 DC
industrial installation. Factory made polyethylene foam (PEF) products.
Specifi cation
94/106646 DC
BS EN 1544. Products and systems for the protection and repair of
concrete structures. Test methods. Determination of creep under tensile
strength at +23C and +50C for synthetic resin products
95/108834 DC
prEN 12209-2. Building hardware. Locks and latches. Part 2. Striking
plates for mechanically operated locks and latches. Requirements and test
met hods
98/106350 DC
Gypsum and gypsum based building plaster. Part 1. Definitions and
requirements (prEN 13279-1)
99/108855 DC
prEN 13747-1. Precast concrete products. Precast concrete product. Floor
plates for floor systems. Part 1. Common requirements
BIP 2001:2004 Standards for fresh concrete
BS 1217:1997 Specification for cast stone
BS 1370:1979 Specification for low heat Portland cement
BS 146:2002
Specification for blastfurnace cements with strength properties outside
the scope of BS EN 197-1
BS 187:1978 Specification for calcium silicate (sandlime and flintlime) bricks
111 158
BS 1881-112:1983 Testing concrete. Methods of accelerated curing of test cubes
BS 1881-113:1983 Testing concrete. Method for making and curing no-fines test cubes
BS 1881-119:1983
Testing concrete. Method for determination of compressive strength
using portions of beams broken in flexure (equivalent cube method)
BS 1881-121:1983
Testing concrete. Method for determination of static modulus of elasticity
in compression
BS 1881-122:1983 Testing concrete. Method for determination of water absorption
BS 1881-124:1988 Testing concrete. Methods for analysis of hardened concrete
BS 1881-125:1986
Testing concrete. Methods for mixing and sampling fresh concrete in the
laboratory
BS 1881-127:1990
Testing concrete. Method of verifying the performance of a concrete
cube compression machine using the comparative cube test
BS 1881-128:1997 Testing concrete. Methods for analysis of fresh concrete
BS 1881-129:1992
Testing concrete. Method for determination of density of partially
compacted semi-dry fresh concrete
BS 1881-130:1996
Testing concrete. Method for temperature-matched curing of concrete
specimens
BS 1881-131:1998 Testing concrete. Methods for testing cement in a reference concrete
BS 1881-201:1986
Testing concrete. Guide to the use of non-destructive methods of test for
hardened concrete
BS 1881-204:1988
Testing concrete. Recommendations on the use of electromagnetic
covermeters
BS 1881-205:1986 Testing concrete. Recommendations for radiography of concrete
BS 1881-206:1986
Testing concrete. Recommendations for determination of strain in
concrete
BS 1881-207:1992
Testing concrete. Recommendations for the assessment of concrete
strength by near-to-surface tests
BS 1881-208:1996
Testing concrete. Recommendations for the determination of the initial
surface absorption of concrete
BS 1881-209:1990
Testing concrete. Recommendations for the measurement of dynamic
modulus of elasticity
BS 3621:2004 Thief resistant lock assemblies. Key egress
BS 3712-1:1991
Building and construction sealants. Methods of test for homogeneity,
relative density and penetration
BS 3712-4:1991 Building and construction sealants. Method of test for adhesion in peel
BS 3797:1990
Specification for lightweight aggregates for masonry units and structural
concrete
BS 3892-1:1997
Pulverized-fuel ash. Specification for pulverized-fuel ash for use with
Portland cement
BS 3892-2:1996
Pulverized-fuel ash. Specification for pulverized-fuel ash to be used as a
Type I addition
BS 3892-3:1997
Pulverized-fuel ash. Specification for pulverized-fuel ash for use in
cementitious grouts
BS 3958-1:1982 Thermal insulating materials. Magnesia preformed insulation
112 158
BS 3958-2:1982 Thermal insulating materials. Calcium silicate preformed insulation
BS 3958-3:1985
Thermal insulating materials. Metal mesh faced man-made mineral fibre
mattresses
BS 3958-4:1982
Thermal insulating materials. Bonded preformed man-made mineral fibre
pipe sections
BS 3958-5:1986
Thermal insulating materials. Specification for bonded man-made
mineral fibre slabs
BS 4016:1997 Specification for flexible building membranes (breather type)
BS 4027:1996 Specification for sulfate-resisting Portland cement
BS 4046:1991 Specification for compressed straw building slabs
BS 4248:2004 Supersulfated cement
BS 4550-0:1978 Methods of testing cement. General introduction
BS 4550-3.1:1978 Methods of testing cement. Physical tests. Introduction
BS 4550-3.4:1978 Methods of testing cement. Physical tests. Strength tests
BS 4550-3.8:1978 Methods of testing cement. Physical tests. Test for heat of hydration
BS 4550-6:1978 Methods of testing cement. Standard sand for mortar cubes
BS 4729:1990 Specification for dimensions of bricks of special shapes and sizes
BS 5080-2:1986
Structural fixings in concrete and masonry. Method for determination of
resistance to loading in shear
BS 5212-1:1990
Cold applied joint sealant systems for concrete pavements. Specification
for joint sealants
BS 5212-2:1990
Cold applied joint sealant systems for concrete pavements. Code of
BS 5212-3:1990 Cold applied joint sealant systems for concrete pavements. Methods of
BS 5224:1995 Specification for masonry cement
BS 5241-1:1994
Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when
dispensed or sprayed on a construction site. Specification for sprayed
foam thermal insulation applied externally
BS 5838-1:1980
Specification for dry packaged cementitious mixes. Prepacked concrete
mixes
BS 6073-1:1981
Precast concrete masonry units. Specification for precast concrete
masonry units
BS 6073-2:1981
Precast concrete masonry units. Method for specifying precast concrete
masonry units
BS 6213:2000 Selection of construction sealants. Guide
BS 6319-10:1987
construction. Method for measurement of temperature of deflection under
a bending stre ss
BS 6319-11:1993
construction. Methods for determination of creep in compression and in
tension
BS 6319-12:1992
construction. Methods for measurement of unrestrained linear shrinkage
and coefficient of thermal expansion
113 158
BS 6319-2:1983
construction. Method for measurement of compressive strength
BS 6319-3:1990
construction. Methods for measurement of modulus of elasticity in
flexure and flexural strength
BS 6319-5:1984
construction. Methods for determination of density of hardened resin
compositions
BS 6319-6:1984
construction. Method for determination of modulus of elasticity in
compression
BS 6319-7:1985
construction. Method for measurement of tensile strength
BS 6319-8:1984
construction. Method for the assessment of resistance to liquids
BS 6319-9:1987
construction. Method for measurement and classification of peak
exotherm temperature
BS 6431-2:1984, EN
121:1991
Ceramic floor and wall tiles. Specification for extruded ceramic tiles with
a low water absorption ( 3%). Group A1
BS 6431-3.1:1986, EN
186-1:1991
Ceramic floor and wall tiles. Extruded ceramic tiles with a water
absorption of 3%
BS 6463-102:2001
Quicklime, hydrated lime and natural calcium carbonate. Methods for
chemical analysis
BS 6463-103:1999
Quicklime, hydrated lime and natural calcium carbonate. Methods for
physical testing
BS 6610:1996 Specification for Pozzolanic pulverized-fuel ash cement
BS 6649:1985 Specification for clay and calcium silicate modular bricks
BS 6699:1992
Specification for ground granulated blastfurnace slag for use with
Portland cement
BS 6717:2001
Precast, unreinforced concrete paving blocks. Requirements and test
methods
BS 690-6:1976 Asbestos-cement slates and sheets. Fittings for use with corrugated sheets
BS 7263-1:2001
Precast concrete flags, kerbs, channels, edgings and quadrants. Precast,
unreinforced concrete paving flags and complementary fittings.
Requiremen ts and test methods
BS 7542:1992 Method of test for curing compounds for concrete
BS 7943:1999
Guide to the interpretation of petrographical examinations for alkali-
silica reactivity
BS 7979:2001 Specification for limestone fines for use with Portland cement
BS 812-100:1990 Testing aggregates. General requirements for apparatus and calibration
BS 812-101:1984 Testing aggregates. Guide to sampling and testing aggregates
BS 812-103.2:1989
Testing aggregates. Method for determination of particle size distribution.
Sedimentation test
BS 812-104:1994
Testing aggregates. Method for qualitative and quantitative petrographic
examination of aggregates
BS 812-109:1990 Testing aggregates. Methods for determination of moisture content
114 158
BS 812-114:1989 Testing aggregates. Method for determination of the polished-stone value
BS 812-123:1999
Testing aggregates. Method for determination of alkali-silica reactivity.
Concrete prism method
BS 812-124:1989 Testing aggregates. Method for determination of frost-heave
BS 8415:2005 Monuments within burial grounds and memorial sites. Specification
BS 8424:2004 Building hardware. Pull handles. Requirements and test methods
BS 8449:2005
Building and construction sealants with movement accommodation
factors greater than 25 %. Method of test for determination of
adhesion/cohesion pr operties at variable temperatures
BS 8500-1:2002
Concrete. Complementary British Standard to BS EN 206-1. Method of
specifying and guidance for the specifier
BS 8500-2:2002
Concrete. Complementary British Standard to BS EN 206-1.
Specification for constituent materials and concrete
BS 8621:2004 Thief resistant lock assemblies. Keyless egress
BS EN 1008:2002
Mixing water for concrete. Specification for sampling, testing and
assessing the suitability of water, including water recovered from
processes in the concrete industry, as mixing water for concrete
BS EN 1015-1:1999
Methods of test for mortar for masonry. Determination of particle size
distribution (by sieve analysis)
BS EN 1015-10:1999
Methods of test for mortar for masonry. Determination of dry bulk
density of hardened mortar
BS EN 1015-11:1999
Methods of test for mortar for masonry. Determination of flexural and
compressive strength of hardened mortar
BS EN 1015-17:2000
Methods of test for mortar for masonry. Determination of water-soluble
chloride content of fresh mortars
BS EN 1015-18:2002
Methods of test for mortar for masonry. Determination of water
absorption coefficient due to capillary action of hardened mortar
BS EN 1015-19:1999
Methods of test for mortar for masonry. Determination of water vapour
permeability of hardened rendering and plastering mortars
BS EN 1015-2:1999
Methods of test for mortar for masonry. Bulk sampling of mortars and
preparation of test mortars
BS EN 1015-21:2002
Methods of test for mortar for masonry. Determination of the
compatibility of one-coat rendering mortars with substrates
BS EN 1015-3:1999
Methods of test for mortar for masonry. Determination of consistence of
fresh mortar (by flow table)
BS EN 1015-4:1999
Methods of test for mortar for masonry. Determination of consistence of
fresh mortar (by plunger penetration)
BS EN 1015-6:1999
Methods of test for mortar for masonry. Determination of bulk density of
fresh mortar
BS EN 1015-7:1999
Methods of test for mortar for masonry. Determination of air content of
fresh mortar
BS EN 1015-9:1999
Methods of test for mortar for masonry. Determination of workable life
and correction time of fresh mortar
115 158
BS EN 1024:1997
Clay roofing tiles for discontinuous laying. Determination of geometric
characteristics
BS EN 1097-1:1996
Tests for mechanical and physical properties of aggregates.
Determination of the resistance to wear (micro-Deval)
BS EN 1097-10:2002
Determination of water suction height
BS EN 1097-2:1998
Tests for mechanical and physical properties of aggregates. Methods for
the determination of resistance to fragmentation
BS EN 1097-3:1998
Determination of loose bulk density and voids
BS EN 1097-4:1999
Determination of the voids of dry compacted filler
BS EN 1097-5:1999
Determination of the water content by drying in a ventilated oven
BS EN 1097-6:2000
Determination of particle density and water absorption
BS EN 1097-7:1999
Determination of the particle density of filler. Pyknometer method
BS EN 1097-8:2000
Determination of the polished stone value
BS EN 1097-9:1998
Determination of the resistance to wear by abrasion from studded tyres.
Nordic test
BS EN 1107-1:2000
Flexible sheets for waterproofing. Determination of dimensional stability.
Bitumen sheets for roof waterproofing
BS EN 1107-2:2001
Flexible sheets for waterproofing. Determination of dimensional stability.
Plastic and rubber sheets for roof waterproofing
BS EN 1108:2000
Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing.
Determination of form stability under cyclical temperature changes
BS EN 1109:2000
Determination of flexibility at low temperature
BS EN 1110:2000
Determination of flow resistance at elevated temperature
BS EN 1154:1997
Building hardware. Controlled door closing devices. Requirements and
test methods
BS EN 1155:1997
Building hardware. Electrically powered hold-open devices for swing
doors. Requirements and test methods
BS EN 1158:1997
Building hardware. Door coordinator devices. Requirements and test
methods
BS EN 1169:1999
Precast concrete products. General rules for factory production control of
glass-fibre reinforced cement
BS EN 1170-1:1998
Precast concrete products. Test method for glass-fibre reinforced cement.
Measuring the consistency of the matrix. 'Slump test' method
BS EN 1170-2:1998
Measuring the fibre content in fresh GRC, 'Wash out test'
116 158
BS EN 1170-3:1998
Measuring the fibre content of sprayed GRC
BS EN 1170-4:1998
Measuring bending strength. 'Simplified bending test' method
BS EN 1170-5:1998
Measuring bending strength, "complete bending test" method
BS EN 1170-6:1998
Determination of the absorption of water by immersion and
determination of the dry density
BS EN 1170-7:1998
Measurement of extremes of dimensional variations due to moisture
conten t
BS EN 12039:2000
Determination of adhesion of granules
BS EN 12051:2000
Building hardware. Door and window bolts. Requirements and test
methods
BS EN 12057:2004 Natural stone products. Modular tiles. Requirements
BS EN 12058:2004 Natural stone products. Slabs for floors and stairs. Requirements
BS EN 12085:1997
Thermal insulating products for building applications. Determination of
linear dimensions of test specimens
BS EN 12086:1997
water vapour transmission properties
BS EN 12087:1997
long term water absorption by immersion
BS EN 12088:1997
long term water absorption by diffusion
BS EN 12089:1997
bending behaviour
BS EN 12090:1997
shear behaviour
BS EN 12091:1997
freeze-thaw resistance
BS EN 12190:1999
Test methods. Determination of compressive strength of repair mortar
BS EN 12209:2003
Building hardware. Locks and latches. Mechanically operated locks,
latches and locking plates. Requirements and test methods
BS EN 12310-1:2000
Flexible sheets for waterproofing. Determination of resistance to tearing
(nail shank). Bitumen sheets for roof waterproofing
BS EN 12310-2:2000
Flexible sheets for waterproofing. Determination of resistance to tearing
(nail shank). Plastic and rubber sheets for roof waterproofing
BS EN 12311-1:2000
Flexible sheets for waterproofing. Determination of tensile properties.
BS EN 12311-2:2000
Flexible sheets for waterproofing. Determination of tensile properties.
117 158
BS EN 12316-1:2000
Flexible sheets for waterproofing. Determination of peel resistance of
joints. Bitumen sheets for roof waterproofing
BS EN 12316-2:2000
Flexible sheets for waterproofing. Determination of peel resistance of
joints. Plastic and rubber sheets for roof waterproofing
BS EN 12317-1:2000
Determination of shear resistance of joints
BS EN 12317-2:2000
Flexible sheets for waterproofing. Plastic and rubber sheets for roof
waterproofing
BS EN 12320:2001
Building hardware. Padlocks and padlock fittings. Requirements and test
methods
BS EN 12326-2:2000
Slate and stone products for discontinuous roofing and cladding. Methods
of test
BS EN 12350-1:2000 Testing fresh concrete. Sampling
BS EN 12350-2:2000 Testing fresh concrete. Slump test
BS EN 12350-3:2000 Testing fresh concrete. Vebe test
BS EN 12350-4:2000 Testing fresh concrete. Degree of compactability
BS EN 12350-5:2000 Testing fresh concrete. Flow table test
BS EN 12350-6:2000 Testing fresh concrete. Density
BS EN 12350-7:2000 Testing fresh concrete. Air content. Pressure methods
BS EN 12370:1999
Natural stone test methods. Determination of resistance to salt
crystallization
BS EN 12371:2001 Natural stone test methods. Determination of frost resistance
BS EN 12372:1999
Natural stone test methods. Determination of flexural strength under
concentrated load
BS EN 12390-1:2000
Testing hardened concrete. Shape, dimensions and other requirements for
specimens and moulds
BS EN 12390-2:2000
Testing hardened concrete. Making and curing specimens for strength
tests
BS EN 12390-3:2002 Testing hardened concrete. Compressive strength of test specimens
BS EN 12390-4:2000
Testing hardened concrete. Compressive strength. Specification for
testing machines
BS EN 12390-5:2000 Testing hardened concrete. Flexural strength of test specimens
BS EN 12390-6:2000 Testing hardened concrete. Tensile splitting strength of test specimens
BS EN 12390-7:2000 Testing hardened concrete. Density of hardened concrete
BS EN 12390-8:2000 Testing hardened concrete. Depth of penetration of water under pressure
BS EN 12407:2000 Natural stone test methods. Petrographic examination
BS EN 12429:1998
Thermal insulating products for building applications. Conditioning to
moisture equilibrium under specified temperature and humidity
conditions
BS EN 12430:1998
behaviour under point load
BS EN 12431:1998
thickness for floating floor insulating products
BS EN 12440:2001 Natural stone. Denomination criteria
BS EN 12467:2004 Fibre-cement flat sheets. Product specification and test methods
118 158
BS EN 12504-1:2000
Testing concrete in structures. Cored specimens. Taking, examining and
testing in compression
BS EN 12504-2:2001
Testing concrete in structures. Non-destructive testing. Determination of
rebound number
BS EN 12504-3:2005 Testing concrete in structures. Determination of pull-out force
BS EN 12504-4:2004 Testing concrete in structures. Determination of ultrasonic pulse velocity
BS EN 12620:2002 Aggregates for concrete
BS EN 12808-3:2002
Adhesives and grouts for tiles. Determination of flexural and
compressive strength
BS EN 12808-4:2002 Adhesives and grouts for tiles. Determination of shrinkage
BS EN 12808-5:2002 Adhesives and grouts for tiles. Determination of water absorption
BS EN 12859:2001 Gypsum blocks. Definitions, requirements and test methods
BS EN 12860:2001
Gypsum based adhesives for gypsum blocks. Definitions, requirements
and test methods
BS EN 13009:2000
Hygrothermal performance of building materials and products.
Determination of hygric expansion coefficient
BS EN 1303:2005 Building hardware. Cylinders for locks. Requirements and test methods
BS EN 13055-1:2002
Lightweight aggregates. Lightweight aggregates for concrete, mortar and
grout
BS EN 13055-2:2004
Lightweight aggregates. Lightweight aggregates for bituminous mixtures
and surface treatments and for unbound and bound applications
BS EN 13111:2001
Flexible sheets for waterproofing. Underlays for discontinuous roofing
and walls. Determination of resistance to water penetration
BS EN 13139:2002 Aggregates for mortar
BS EN 13161:2001
Natural stone test methods. Determination of flexural strength under
constant moment
BS EN 13162:2001
Thermal insulation products for buildings. Factory made mineral wool
(MW) products. Specification
BS EN 13163:2001
Thermal insulation products for buildings. Factory made products of
expanded polystyrene. Specification
BS EN 13164:2001
extruded polystyrene foam (XPS). Specification
BS EN 13165:2001
Thermal insulation products for buildings. Factory made rigid
polyurethane foam (PUR) products. Specification
BS EN 13166:2001
phenolic foam (PF). Specification
BS EN 13167:2001
Thermal insulation products for buildings. Factory made cellular glass
(CG) products. Specification
BS EN 13168:2001
Thermal insulation products for buildings. Factory made wood wool
(WW) products. Specification
BS EN 13169:2001
expanded perlite (EPB). Specification
BS EN 13171:2001
Thermal insulation products for buildings. Factory made wood fibre
(WF) products. Specification
119 158
BS EN 13172:2001 Thermal insulating products. Evaluation of conformity
BS EN 13198:2003 Precast concrete products. Street furniture and garden products
BS EN 13224:2004 Precast concrete products. Ribbed floor elements
BS EN 13225:2004 Precast concrete products. Linear structural elements
BS EN 13242:2002
Aggregates for unbound and hydraulically bound materials for use in
civil engineering work and road construction
BS EN 13279-2:2004 Gypsum binders and gypsum plasters. Test methods
BS EN 13357:2002, BS
2000-502:2002
Methods of test for petroleum and its products. BS 2000-502. Bitumen
and bituminous binders. Determination of the efflux time of petroleum
cut-bac k and fluxed bitumens
BS EN 13364:2002
Natural stone test methods. Determination of the breaking load at dowel
hole
BS EN 13369:2004 Common rules for precast concrete products
BS EN 13375:2004
Flexible sheets for waterproofing. Waterproofing of concrete bridge
decks and other concrete surfaces trafficable by vehicles. Specimen
preparatio n
BS EN 13383-1:2002 Armourstone. Specification
BS EN 13383-2:2002 Armourstone. Test methods
BS EN 13408:2002
Methods of test for hydraulic setting floor smoothing and/or levelling
compounds. Determination of bond strength
BS EN 13409:2002
compounds. Determination of setting time
BS EN 13416:2001
Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for
roof waterproofing. Rules for sampling
BS EN 13454-2:2003
Binders, composite binders and factory made mixtures for floor screeds
based on calcium sulfate. Test methods
BS EN 13467:2001
Thermal insulating products for building equipment and industrial
installations. Determination of dimensions, squareness and linearity of
preforme d pipe insulation
BS EN 13468:2001
installations. Determination of trace quantities of water soluble chloride,
fluo ride, silicate, sodium ions and pH
BS EN 13469:2001
installations. Determination of water vapour transmission properties of
preforme d pipe insulation
BS EN 13470:2001
installations. Determination of the apparent density of preformed pipe
insulatio n
BS EN 13471:2001
installations. Determination of the coefficient of thermal expansion
BS EN 13472:2001
installations. Determination of short term water absorption by partial
immersion of preformed pipe insulation
120 158
BS EN 13494:2002
Thermal insulation products for building applications. Determination of
the tensile bond strength of the adhesive and of the base coat to the ther
mal insulation material
BS EN 13495:2002
the pull-off resistance of external thermal insulation composite systems (
ETICS) (foam block test)
BS EN 13496:2002
the mechanical properties of glass fibre meshes
BS EN 13497:2002
the resistance to impact of external thermal insulation composite systems
(ETICS)
BS EN 13498:2002
the resistance to penetration of external thermal insulation composite sys
tems (ETICS)
BS EN 13499:2003
Thermal insulation products for buildings. External thermal insulation
composite systems (ETICS) based on expanded polystyrene.
Specification
BS EN 13500:2003
Thermal insulation products for buildings. External thermal insulation
composite systems (ETICS) based on mineral wool. Specification
BS EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
BS EN 1352:1997
Determination of static modulus of elasticity under compression of
structu re
BS EN 1353:1997 Determination of moisture content of autoclaved aerated concrete
BS EN 1354:1997
Determination of compressive strength of lightweight aggregate concrete
with open structure
BS EN 1355:1997
Determination of creep strains under compression of autoclaved aerated
concrete or lightweight aggregate concrete with open structure
BS EN 1356:1997
Performance test for prefabricated reinforced components of autoclaved
aerated concrete or lightweight aggregate concrete with open structure
unde r transverse load
BS EN 13639:2002 Determination of total organic carbon in limestone
BS EN 13653:2004
decks and other concrete surfaces trafficable by vehicles. Determination
of sh ear strength
BS EN 1367-1:2000
Tests for thermal and weathering properties of aggregates. Determination
of resistance to freezing and thawing
BS EN 1367-2:1998
Tests for thermal and weathering properties of aggregates. Magnesium
sulfate test
BS EN 1367-3:2001
Tests for thermal and weathering properties of aggregates. Boiling test
for Sonnenbrand basalt
BS EN 1367-4:1998
of drying shrinkage
BS EN 1367-5:2002
of resistance to thermal shock
121 158
BS EN 13693:2004 Precast concrete products. Special roof elements
BS EN 13748-1:2004 Terrazzo tiles. Terrazzo tiles for internal use
BS EN 13748-2:2004 Terrazzo tiles. Terrazzo tiles for external use
BS EN 13755:2002
Natural stone. Test methods. Determination of water absorption at
atmospheric pressure
BS EN 13793:2003
behaviour under cyclic loading
BS EN 13820:2003
Thermal insulating materials for building applications. Determination of
organic content
BS EN 13851:2003
compounds. Determination of flexural and compressive strength
BS EN 13872:2004
Method of test for smoothing and/or levelling compounds. Determination
of dimensional change
BS EN 13892-3:2004
Methods of test for screed materials. Determination of wear resistance-
Boehme
BS EN 13914-1:2005
Design, preparation and application of external rendering and internal
plastering. External rendering
BS EN 13914-2:2005
Design, preparation and application of external rendering and internal
plastering. Design considerations and essential principles for internal pla
stering
BS EN 14016-2:2004
Binders for magnesite screeds. Caustic magnesia and magnesium
chloride. Test methods
BS EN 14063-1:2004
Thermal insulation materials and products. In-situ formed expanded clay
lightweight aggregate products (LWA). Specification for the loose-fill
pro ducts before installation
BS EN 14216:2004
Cement. Composition, specifications and conformity criteria for very low
heat special cements
BS EN 14316-1:2004
Thermal insulation products for buildings. In-situ thermal insulation
formed from expanded perlite (EP) products. Specification for bonded
and loo se-fill products before installation
BS EN 14317-1:2004
Thermal insulation products for buildings. In-situ thermal insulation
formed from exfoliated vermiculite (EV) products. Specification for
bonded a nd loose-fill products before installation
BS EN 14411:2003 Ceramic tiles. Definitions, classification, characteristics and marking
BS EN 14474:2004
Precast concrete products. Concrete with wood-chips as aggregate.
BS EN 14617-1:2005
Agglomerated stone. Test methods. Determination of apparent density
and water absorption
BS EN 14617-10:2005 Agglomerated stone. Test methods. Determination of chemical resistance
BS EN 14617-11:2005
Agglomerated stone. Test methods. Determination of linear thermal
expansion coefficient
BS EN 14617-12:2005 Agglomerated stone. Test methods. Determination of dimensional
BS EN 14617-15:2005
Agglomerated stone. Test methods. Determination of compressive
strength
122 158
BS EN 14617-16:2005
Agglomerated stone. Test methods. Determination of dimensions,
geometric characteristics and surface quality of modular tiles
BS EN 14617-2:2004
Agglomerated stone. Test methods. Determination of flexural strength
(bending)
BS EN 14617-4:2005
Agglomerated stone. Test methods. Determination of the abrasion
resistance
BS EN 14617-5:2005
Agglomerated stone. Test methods. Determination of freeze and thaw
resistance
BS EN 14617-6:2005
Agglomerated stone. Test methods. Determination of thermal shock
resistance
BS EN 14617-9:2005 Agglomerated stone. Test methods. Determination of impact resistance
BS EN 14649:2005
Precast concrete products. Test method for strength retention of glass
fibres in cement and concrete (SIC test)
BS EN 14651:2005
Test method for metallic fibered concrete. Measuring the flexural tensile
strength (limit of proportionality (LOP), residual)
BS EN 1469:2004 Natural stone products. Slabs for cladding. Requirements
BS EN 14694:2005
decks and other concrete surfaces trafficable by vehicles. Determination
of re sistance to dynamic water pressure after damage by pre-treatment
BS EN 1520:2002
Prefabricated reinforced components of lightweight aggregate concrete
with open structure
BS EN 1521:1997
Determination of flexural strength of lightweight aggregate concrete with
open structure
BS EN 1527:1998
Building hardware. Hardware for sliding doors and folding doors.
BS EN 1602:1997
the apparent density
BS EN 1603:1997
dimensional stability under constant normal laboratory conditions (23C/
50% relative humidity)
BS EN 1604:1997
dimensional stability under specified temperature and humidity
conditions
BS EN 1605:1997
deformation under specified compressive load and temperature conditions
BS EN 1606:1997
compressive creep
BS EN 1607:1997
tensile strength perpendicular to faces
BS EN 1608:1997
tensile strength parallel to faces
BS EN 1609:1997
short term water absorption by partial immersion
BS EN 1670:1998 Building hardware. Corrosion resistance. Requirements and test methods
123 158
BS EN 1737:1998
Determination of shear strength of welded joints of reinforcement mats
or cages for prefabricated components made of autoclaved aerated
concrete o r lightweight aggregate concrete with open structure
BS EN 1738:1998
Determination of steel stresses in unloaded reinforced components made
of autoclaved aerated concrete
BS EN 1739:1998
Determination of shear strength for in-plane forces of joints between
prefabricated components made of autoclaved aerated concrete or
lightweight aggregate concrete with open structure
BS EN 1740:1998
Performance test for prefabricated reinforced components made of
structure under predominantly longitudinal load (vertical components)
BS EN 1741:1998
Determination of shear strength for out-of-plane forces of joints between
prefabricated components made of autoclaved aerated concrete or
lightwei ght aggregate concrete with open structure
BS EN 1742:1998
Determination of shear strength between different layers of multilayer
components made of autoclaved aerated concrete or lightweight
aggregate con crete with open structure
BS EN 1744-1:1998 Tests for chemical properties of aggregates. Chemical analysis
BS EN 1744-3:2002
Tests for chemical properties of aggregates. Preparation of eluates by
leaching of aggregates
BS EN 179:1998
Building hardware. Emergency exit devices operated by a lever handle or
push pad. Requirements and test methods
BS EN 1844:2001
Flexible sheets for waterproofing. Determination of resistance to ozone.
BS EN 1847:2001
Flexible sheets for waterproofing. Plastic and rubber sheets for roof
waterproofing. Methods for exposure to liquid chemicals including water
BS EN 1848-1:2000
Flexible sheets for waterproofing. Determination of length, width and
straightness. Bitumen sheets for roof waterproofing
BS EN 1849-1:2000
Flexible sheets for waterproofing. Determination of thickness and mass
per unit area. Bitumen sheets for roof waterproofing
BS EN 1850-1:2000
Flexible sheets for waterproofing. Determination of visible defects.
BS EN 1906:2002
Building hardware. Lever handles and knob furniture. Requirements and
test methods
BS EN 1925:1999
Natural stone test methods. Determination of water absorption coefficient
by capillarity
BS EN 1926:1999 Natural stone test methods. Determination of compressive strength
BS EN 1934:1998
Thermal performance of buildings. Determination of thermal resistance
by hot box method using heat flow meter. Masonry
BS EN 1935:2002 Building hardware. Single-axis hinges. Requirements and test methods
BS EN 1936:1999
Natural stone test methods. Determination of real density and apparent
density and of total and open porosity
BS EN 1937:1999
Test method for hydraulic setting floor smoothing and/or levelling
compounds. Standard mixing procedures
124 158
BS EN 196-1:2005 Methods of testing cement. Determination of strength
BS EN 196-2:2005 Methods of testing cement. Chemical analysis of cement
BS EN 196-3:2005 Methods of testing cement. Determination of setting times and soundness
BS EN 196-5:2005 Methods of testing cement. Pozzolanicity test for pozzolanic cement
BS EN 196-6:1992 Methods of testing cement. Determination of fineness
BS EN 196-7:1992
Methods of testing cement. Methods of taking and preparing samples of
cement
BS EN 196-8:2003 Methods of testing cement. Heat of hydration. Solution method
BS EN 196-9:2003 Methods of testing cement. Heat of hydration. Semi-adiabatic method
BS EN 197-1:2000
Cement. Composition, specifications and conformity criteria for common
cements
BS EN 197-4:2004
Cement. Composition, specifications and conformity criteria for low
early strength blastfurnace cements
BS EN 206-1:2000 Concrete. Specification, performance, production and conformity
BS EN 28339:1991,
ISO 8339:1984
Building construction. Jointing products. Sealants. Determination of
tensile properties
BS EN 28340:1991,
ISO 8340:1984
Building construction. Jointing products. Sealants. Determination of
tensile properties at maintained extension
BS EN 28394:1991,
ISO 8394:1988
Building construction. Jointing products. Determination of extrudability
of one-component sealants
BS EN 29046:1991,
ISO 9046:1987
Building construction. Sealants. Determination of adhesion/cohesion
properties at constant temperature
BS EN 29048:1991,
ISO 9048:1987
Building construction. Jointing products. Determination of extrudability
of sealants using standardized apparatus
BS EN 413-1:2004 Masonry cement. Composition, specifications and conformity criteria
BS EN 445:1997 Grout for prestressing tendons. Test methods
BS EN 446:1997 Grout for prestressing tendons. Grouting procedures
BS EN 447:1997 Grout for prestressing tendons. Specification for common grout
BS EN 450-1:2005 Fly ash for concrete. Definition, specifications and conformity criteria
BS EN 450-2:2005 Fly ash for concrete. Conformity evaluation
BS EN 451-1:2003 Method of testing fly ash. Determination of free calcium oxide content
BS EN 451-2:1995 Method of testing fly ash. Determination of fineness by wet sieving
BS EN 459-2:2001 Building lime. Test methods
BS EN 459-3:2001 Building lime. Conformity evaluation
BS EN 480-1:1998
Admixtures for concrete, mortar and grout. Test methods. Reference
concrete and reference mortar for testing
BS EN 480-10:1997
Admixtures for concrete, mortar and grout. Test methods. Determination
of water soluble chloride content
BS EN 480-11:1999
of air void characteristics in hardened concrete
BS EN 480-12:1998
of the alkali content of admixtures
BS EN 480-13:2002
Admixtures for concrete, mortar and grout. Test methods. Reference
masonry mortar for testing mortar admixtures
125 158
BS EN 480-4:1997
of bleeding of concrete
BS EN 480-5:1997
of capillary absorption
BS EN 480-6:1997
Admixtures for concrete, mortar and grout. Test methods. Infrared
analysis
BS EN 480-8:1997
of the conventional dry material content
BS EN 490:2004
Concrete roofing tiles and fittings for roof covering and wall cladding.
Product specifications
BS EN 495-5:2001
Flexible sheets for waterproofing. Determination of foldability at low
temperature. Plastic and rubber sheets for roof waterproofing
BS EN 538:1994 Clay roofing tiles for discontinuous laying. Flexural strength test
BS EN 539-1:1994
Clay roofing tiles for discontinuous laying. Determination of physical
characteristics. Impermeability test
BS EN 539-2:1998
Clay roofing tiles for discontinuous laying. Determination of physical
characteristics. Test for frost resistance
BS EN 678:1994 Determination of the dry density of autoclaved aerated concrete
BS EN 771-1:2003 Specification for masonry units. Clay masonry units
BS EN 771-2:2003 Specification for masonry units. Calcium silicate masonry units
BS EN 771-3:2003
Specification for masonry units. Aggregate concrete masonry units
(dense and light-weight aggregates)
BS EN 771-4:2003
Specification for masonry units. Autoclaved aerated concrete masonry
units
BS EN 771-5:2003 Specification for masonry units. Manufactured stone masonry units
BS EN 772-1:2000 Methods of test for masonry units. Determination of compressive
BS EN 772-10:1999
Methods of test for masonry units. Determination of moisture content of
calcium silicate and autoclaved aerated concrete units
BS EN 772-11:2000
Methods of test for masonry units. Determination of water absorption of
aggregate concrete, manufactured stone and natural stone masonry units
due to capillary action and the initial rate of water absorption of clay
masonry units
BS EN 772-13:2000
Methods of test for masonry units. Determination of net and gross dry
density of masonry units (except for natural stone)
BS EN 772-16:2000 Methods of test for masonry units. Determination of dimensions
BS EN 772-2:1998
Methods of test for masonry units. Determination of percentage area of
voids in aggregate concrete masonry units (by paper indentation)
BS EN 772-3:1998
Methods of test for masonry units. Determination of net volume and
percentage of voids of clay masonry units by hydrostatic weighing
BS EN 772-4:1998
Methods of test for masonry units. Determination of real and bulk density
and of total and open porosity for natural stone masonry units
BS EN 772-9:1998
Methods of test for masonry units. Determination of volume and
percentage of voids and net volume of calcium silicate masonry units by
sand fillin g
126 158
BS EN 822:1995
length and width
BS EN 823:1995
thickness
BS EN 824:1995
squareness
BS EN 825:1995
flatness
BS EN 826:1996
compression behaviour
BS EN 846-4:2002
load capacity and load-deflection characteristics of straps
BS EN 932-1:1997 Tests for general properties of aggregates. Methods for sampling
BS EN 932-2:1999
Tests for general properties of aggregates. Methods for reducing
laboratory samples
BS EN 932-3:1997
Tests for general properties of aggregates. Procedure and terminology for
simplified petrographic description
BS EN 932-5:2000
Tests for general properties of aggregates. Common equipment and
calibration
BS EN 932-6:1999
Tests for general properties of aggregates. Definitions of repeatability
and reproducibility
BS EN 933-1:1997
Tests for geometrical properties of aggregates. Determination of particle
size distribution. Sieving method
BS EN 933-10:2001
Grading of fillers (air-jet sieving)
BS EN 933-2:1996
size distribution. Test sieves, nominal size of apertures
BS EN 933-3:1997
shape. Flakiness index
BS EN 933-4:2000
shape. Shape index
BS EN 933-5:1998
Tests for geometrical properties of aggregates. Determination of
percentage of crushed and broken surfaces in coarse aggregate particles
BS EN 933-6:2001
Tests for geometrical properties of aggregates. Assessment of surface
characteristics. Flow coefficient of aggregates
BS EN 933-7:1998
Tests for geometrical properties of aggregates. Determination of shell
content. Percentage of shells in coarse aggregates
BS EN 933-8:1999
Tests for geometrical properties of aggregates. Assessment of fines. Sand
equivalent test
BS EN 933-9:1999
Methylene blue test
BS EN 934-2:2001
Admixtures for concrete, mortar and grout. Concrete admixtures.
Definitions, requirements, conformity, marking and labelling
127 158
BS EN 934-4:2001
Admixtures for concrete, mortar and grout. Admixtures for grout for
prestressing tendons. Definitions, requirements, conformity, marking and
label ling
BS EN 934-6:2001
Admixtures for concrete, mortar and grout. Sampling, conformity control
and evaluation of conformity
BS EN 989:1996
Determination of the bond behaviour between reinforcing bars and
autoclaved aerated concrete by the 'push-out' test
BS EN 990:2002
Test methods for verification of corrosion protection of reinforcement in
autoclaved aerated concrete and lightweight aggregate concrete with open
structure
BS EN 991:1996
Determination of the dimensions of prefabricated reinforced components
made of autoclaved aerated concrete or lightweight aggregate concrete
with open structure
BS EN 992:1996
Determination of the dry density of lightweight aggregate concrete with
open structure
BS EN 998-1:2003 Specification for mortar for masonry. Rendering and plastering mortar
BS EN 998-2:2003 Specification for mortar for masonry. Masonry mortar
BS EN ISO 10456:2000
Building materials and products. Procedures for determining declared and
design thermal values
BS EN ISO 10545-
1:1997
Ceramic tiles. Sampling and basis for acceptance
BS EN ISO 10545-
10:1997
Ceramic tiles. Determination of moisture expansion
BS EN ISO 10545-
11:1996
Ceramic tiles. Determination of crazing resistance for glazed tiles
BS EN ISO 10545-
12:1997
Ceramic tiles. Determination of frost resistance
BS EN ISO 10545-
13:1997
Ceramic tiles. Determination of chemical resistance
BS EN ISO 10545-
14:1997
Ceramic tiles. Determination of resistance to stains
BS EN ISO 10545-
15:1997
Ceramic tiles. Determination of lead and cadmium given off by glazed
tiles
BS EN ISO 10545-
16:2000
Ceramic tiles. Determination of small colour differences
BS EN ISO 10545-
2:1997
Ceramic tiles. Determination of dimensions and surface quality
BS EN ISO 10545-
3:1997
Ceramic tiles. Determination of water absorption, apparent porosity,
apparent relative density and bulk density
BS EN ISO 10545-
4:1997
Ceramic tiles. Determination of modulus of rupture and breaking strength
BS EN ISO 10545-
5:1998
Ceramic tiles. Determination of impact resistance by measurement of
coefficient of restitution
128 158
BS EN ISO 10545-
6:1997
Ceramic tiles. Determination of resistance to deep abrasion for unglazed
tiles
BS EN ISO 10545-
7:1999
Ceramic tiles. Determination of resistance to surface abrasion for glazed
tiles
BS EN ISO 10545-
8:1996
Ceramic tiles. Determination of linear thermal expansion
BS EN ISO 10545-
9:1996
Ceramic tiles. Determination of resistance to thermal shock
BS EN ISO 10591:1998
Building construction. Sealants. Determination of adhesion/cohesion
properties after immersion in water
BS EN ISO 11431:2002
Building construction. Jointing products. Determination of
adhesion/cohesion properties of sealants after exposure to heat, water and
artificial l ight through glass
BS EN ISO 11600:2003
Building construction. Jointing products. Classification and requirements
for sealants
BS EN ISO 12570:2000
Determination of moisture content by drying at elevated temperature
BS EN ISO 12571:2000
Determination of hygroscopic properties
BS EN ISO 12572:2001
Determination of water vapour transmission properties
BS EN ISO 13787:2003
Thermal insulation products for building equipment and industrial
installations. Determination of declared thermal conductivity
BS EN ISO 15148:2002
Determination of water absorption coefficient by partial immersion
BS EN ISO 7389:2003
Building construction. Jointing products. Determination of elastic
recovery of sealants
BS EN ISO 7390:2003
Building construction. Jointing products. Determination of resistance to
flow of sealants
BS EN ISO 9047:2003
Building construction. Jointing products. Determination of
adhesion/cohesion properties of sealants at variable temperatures
BS ISO 11561:1999
Ageing of thermal insulation materials. Determination of the long-term
change in thermal resistance of closed-cell plastics (accelerated laborator
y test methods)
BS ISO 13640:1999 Building construction. Jointing products. Specifications for test substrates
DD 216:1993 Method for determination of chloride content of fresh concrete
DD 249:1999
Testing aggregates. Method for the assessment of alkali-silica reactivity.
Potential accelerated mortar-bar method
DD 88:1983
Method for the assessment of pot life of non-flowing resin compositions
for use in civil engineering
DD CEN/TS 13126-
1:2004
Building hardware, fittings for windows and door height windows.
Requirements and test methods. Requirements common to all types of
fittings
129 158
DD CEN/TS 13126-
10:2004
Requirements and test methods. Arm balancing systems
DD CEN/TS 13126-
11:2004
Requirements and test methods. Top hung projecting reversible hardware
DD CEN/TS 13126-
12:2004
Requirements and test methods. Side-hung projecting reversible hardware
DD CEN/TS 13126-
13:2004
Requirements and test methods. Sash balances
DD CEN/TS 13126-
14:2004
Requirements and test methods. Sash fasteners
DD CEN/TS 13126-
15:2004
Requirements and test methods. Rollers
DD CEN/TS 13126-
16:2004
Requirements and test methods. Fittings for lift and slide systems
DD CEN/TS 13126-
17:2004
Requirements and test methods. Fittings for tilt and slide systems
DD CEN/TS 13126-
2:2004
Requirements and test methods. Casement fastener handles
DD CEN/TS 13126-
3:2004
Requirements and test methods. Manoeuvring fittings for espagnolette
bolts/slidin g button
DD CEN/TS 13126-
4:2004
Requirements and test methods. Espagnolette bolts
DD CEN/TS 13126-
5:2004
Requirements and test methods. Devices that restrict the opening of
windows
DD CEN/TS 13126-
6:2004
Requirements and test methods. Variable geometry stay hinges (with or
without a f riction system)
DD CEN/TS 13126-
7:2004
Requirements and test methods. Finger catches
DD CEN/TS 13126-
8:2004
Requirements and test methods. Tilt & turn, Tilt-First and Turn-Only
hardware
DD CEN/TS 13126-
9:2004
Requirements and test methods. Pivot hinges
DD ENV 1170-8:1997
Cyclic weathering type test
KIT 30 Testing fresh concrete set
PAS 70:2003
HD clay bricks. Guide to appearance and site measured dimensions and
tolerance
PD 6472:1974 Guide to specifying the quality of building mortars
PD 6534:1993
Guide to the use in the UK of DD ENV 206:1992. Concrete.
Performance, production, placing and compliance criteria
130 158
PD 6680:2002 Guidance on the new European Standards for thermal insulation materials
PD 6682-1:2003
Aggregates. Aggregates for concrete. Guidance on the use of BS EN
12620
PD 6682-3:2003 Aggregates. Aggregates for mortar. Guidance on the use of BS EN 13139
PD 6682-4:2003
Aggregates. Lightweight aggregates for concrete, mortar and grout.
Guidance on the use of BS EN 13055-1
PD 6682-7:2003 Aggregates. Armourstone. Guidance on the use of BS EN 13383
PD 6682-9:2003 Aggregates. Guidance on the use of European test method standards
PD CEN/TR Child use and care articles. Safety guidelines
PD CEN/TR
14862:2004
Precast concrete products. Full-scale testing requirements in standards on
precast concrete products
PD CR 13933:2000, CR
13933:2000
Masonry cement. Testing for workability (cohesivity)
131 158
GBM50-Building Installation
00/102509 DC
BS EN 12056-2. National Annex. Gravity drainage systems inside
buildings. Part 2: Sanitary pipework, layout and calculation
00/108352 DC
prEN 14055-1. WC flushing cisterns. Part 1. Flushing cisterns with
integral overflow and valve outlet mechanism
00/122334 DC
BS EN 13917-2. Water meters within the scope of Directives 75/33/EEC
and 79/830/EEC, equipped with electronic totalising devices. Part 2.
Pattern approval tests
00/203307 DC
IEC 60364-6-62. Ed.1. Electrical installations of buildings. Part 6-62:
Verification. Periodic inspection and testing
00/203308 DC
Verification. Reporting
00/246986 DC
IEC 62055-31. Electricity metering. Payment systems. Part 31: Particular
requirements. Static payment meters for active energy (classes 1 & 2)
00/705373 DC
prEN 13836. Gas-fired central heating boilers. Type B boilers of nominal
heat input exceeding 300 kW but not exceeding 1000 kW
00/705406 DC
prEN 13831. Closed expansion vessels with built in diaphragm for
installation in water systems
00/707656 DC
EN 81-1:1998. Safety rules for the construction and installation of lifts.
Part 1. Electric lifts
00/714693 DC
prEN 13141-7. Ventilation for buildings. Performance testing of
components/products for residential ventilation. Part 7: Performance
testing of a mechanical supply and exhaust ventilation units (including
heat recovery) for mechanical ventilation systems intended for single
family dwellings
01/103428 DC BS EN 14124. Inlet valves for flushing cisterns with internal overflow
01/205976 DC
IEC 60519-10. Safety in electroheat installations. Part 10. Particular
requirements for electrical resistance trace heating for industrial and com
mercial applications [IEC document 27/294/CD]
01/219354 DC
IEC 60050-826. Ed.2. International electrotechnical vocabulary. Part 826:
Electrical installations
01/219357 DC
IEC 60364-4-41. Ed.5.0. Electrical installations of buildings. Part 4-41:
Protection for safety. Protection against electric shock
01/219358 DC
IEC 60364-6-63. Electrical installations of buildings. Part 6-63:
Verification. Reporting. (IEC Document 64/1186/CD)
01/706271 DC
prEN 14134. Ventilation for buildings. Performance testing and
installation checks of residential systems
01/712350 DC
BS EN 419-2. Non-domestic gas-fired overhead luminous radiant heaters.
Part 2. Rational use of energy
01/714475 DC
BS EN 14277. Ventilation for buildings. Air terminal devices. Method
for airflow measurement by calibrated sensors in ATD/plenum boxes
02/101511 DC
BS EN 200. Sanitary tapware. Single taps and combination taps (PN 10).
General technical specification.
132 158
02/102015 DC
BS EN 14367. Backflow preventer with different non controllable
pressure zones. Family C. Type A
02/102290 DC
prEN 13443-2. Water conditioning equipment inside buildings.
Mechanical filters. Part 2: Particle rating 1 micrometre to less than 80
micrometres. Requirements for performance, safety and testing
02/104824 DC BS EN 14516. Baths for domestic purposes
02/105845 DC prEN 14527. Shower trays for domestic purposes
02/105888 DC prEN 14528. Bidets. Functional requirements and test methods
02/200701 DC
Requirements for special installations or locations. Locations containin g
a bath tub or shower basin
02/200702 DC
IEC 60364-7-703. Ed. 2. Electrical installations of buildings. Part 7-703:
Requirements for special installations or locations. Locations containi ng
sauna heaters
02/201462 DC
Requirements for special installations or locations. Communal facilities
and workplaces
02/201463 DC
IEC 60364-5-52. Ed.3.0. Electrical installations of buildings. Part 5-52.
Selection and erection of electrical equipment. Wiring systems
02/701494 DC
prEN 14337. Heating Systems in buildings. Design and installation of
direct electrical room heating systems
02/701495 DC
EN 14335. Heating Systems in buildings. Method for calculation of
system energy requirements and system efficiencies
02/701496 DC
EN 14336. Heating Systems in buildings. Installation and commissioning
of the whole system
02/705329 DC prEN 14438. Gas-fired insets for heating more than one room
02/708984 DC
prEN 14518. Ventilation for buildings. Chilled beams. Testing and rating
of passive chilled beams
02/711303 DC
prEN 14543. Specification for dedicated liquefied petroleum gas
appliances. Patio heaters. LPG flueless patio heaters for outdoor and
ventilated a rea use
02/711695 DC
EN 13240/prA1. Roomheaters fired by solid fuel. Requirements and test
methods
02/714116 DC
BS 6230:1991. Installation of gas-fired forced convection air convection
air heaters for commercial and industrial space heating (2nd and 3rd fami
ly gases)
02/714117 DC
BS 6896:1991. Installation of gas-fired overhead radiant heaters for
industrial and commercial heating (2nd and 3rd family gases)
03/110849 DC
BS EN 14652. Water conditioning equipment inside buildings.
Membrane separation device. Requirements for performance, safety and
testing
03/110852 DC BS EN 695. Kitchen sinks. Connecting dimensions
03/116757 DC
EN 81-22. Safety rules for the construction and installation of lifts. Lifts
for the transport of persons and goods. Part 22. Electric passenger a nd
goods passenger lifts with inclined travel path
133 158
03/117188 DC
BS EN 12101-10. Smoke and heat control systems. Part 10. Power
supplies
03/302454 DC
EN 12464-2. Light and lighting. Lighting of work places. Part 2. Outdoor
work places
03/304151 DC
IEC 60519-10-1. Safety in electroheat installations. Part 10-1. Particular
requirements for electrical resistance trace heating systems for indust rial
and commercial applications
03/312451 DC
IEC 60335-2-106. Household and similar electrical appliances. Safety.
Part 2-106. Particular requirements for under carpet heating systems for
roo m heating
03/313638 DC
IEC 60335-2-106. Household and similar electrical appliances. Safety.
Part 2-106. Particular requirements for under carpet heating systems
forroom heating
03/316890 DC
EN 1886. Ventilation for buildings. Air handling units. Mechanical
performance
03/316891 DC
EN 13053. Ventilation for buildings. Air handling units. Ratings and
performance for units, components and sections
03/317080 DC
EN 14785. Residential space heating appliances fired by wood pellets.
03/318125 DC
EN 14829. Independent gas-fired flueless space heaters for nominal heat
input not exceeding 6 kW
03/523674 DC
IEC 60364-1. Ed.5.0. Electrical installations of buildings. Part 1:
Fundamental principles, assessment of general characteristics, definitions
03/523725 DC
IEC 60364-7-704. Ed.2. Electrical installations of buildings. Part 7-704.
Requirements for special installations or locations. Construction and de
molition site installations
03/523726 DC
IEC 60364-7-706. Ed.2. Electrical installations of buildings. Part 7-706.
Requirements for special installations or locations. Conducting location s
with restricted movement
04/30026984 DC,
2004/30026984 DC
BS EN 12101-7. Smoke and heat control systems. Part 7. Smoke ducts
04/30026990 DC,
2004/30026990 DC
BS EN 12101-8. Smoke and heat control systems. Part 8. Smoke
dampers
04/30031075 DC,
2004/30031075 DC
ISO 4064-1. Measurement of water flow in closed fully charged conduits.
Meters for cold potable water and hot water. Part 1. Specifications
04/30031093 DC,
2004/30031093 DC
Meters for cold potable water and hot water. Part 3. Test methods and
equi pment
04/30062956 DC,
2004/30062956 DC
Meters for cold potable water and hot water. Part 2. Installation requirem
ents
04/30108962 DC,
2004/30108962 DC
IEC 60364-7-753 ED.1. Electrical installations of buildings. Part 7-753.
Requirements for special installations or locations. Floor and ceiling he
ating systems
134 158
04/30109542 DC,
2004/30109542 DC
EN 13141-8. Ventilation for buildings. Performance testing of
components/products for residential ventilation. Part 8. Performance
testing of undu cted mechanical supply and exhaust ventilation units
[including heat recovery] for mechanical ventilation systems intended for
a single room
04/30113869 DC,
2004/30113869 DC
EN 1506. Ventilation for buildings. Sheet metal air ducts and fittings
with circular cross-section. Dimension
04/30113996 DC
prEN 81-41. Safety rules for the construction and installation of lifts.
Special lifts for the transport of persons and goods. Part 41. Vertical l
ifting platforms intended for use by persons with impaired mobility
04/30116054 DC,
2004/30116054 DC
IEC 60364-7-729 ED 1. Electrical installations of buildings. Part 7-729.
Requirements for special installations or locations. Operating or mainten
ance gangways
04/30116801 DC,
2004/30116801 DC
EN 15001-2. Gas supply systems. Gas installation pipework with an
operating pressure greater than 0.5 bar for industrial, commercial and non-
domes tic installations. Part 2. Detailed functional requirements for
commissioning, operation and maintenance
04/30122798 DC,
2004/30122798 DC
EN 15035. Heating boilers. Room sealed operations for boilers for fuel
oil
04/30126127 DC EN 15102. Decorative wallcoverings. Roll and panel form
05/30086662 DC
BS 6400-2. Specification for the installation, exchange, relocation and
removal of domestic-sized gas meters (2nd and 3rd family gases). Part 2.
M edium pressure (2nd family gases)
05/30116741 DC
BS 6891. Installation of low pressure gas pipework of up to 35 mm
(R1) in domestic premises (2nd family gas). Specification
05/30127036 DC
EN 817. Sanitary tapware. Mechanical mixers (PN 10). General technical
specifications
05/30128010 DC
BS 5655-11. Lifts and service lifts. Part 11. Code of practice for the
undertaking of modifications to existing electric lifts
05/30128654 DC
EN 1775. Gas supply. Gas pipework for buildings. Maximum operating
pressure less than or equal to 5 bar. Functional recommendations
05/30129235 DC
EN 15116. Ventilation in buildings. Chilled beams. Testing and rating of
active chilled beams
05/30129351 DC
EN 12097. Ventilation for buildings. Ductwork. Requirements for
ductwork components to facilitate maintenance of ductwork systems
05/30132667 DC
IEC 62056-61. ED 2. Electricity metering. Data exchange for meter
reading, tariff and load control. Part 61. Object identification system
(OBIS)
05/30132908 DC EN 15200. Sanitary appliances. Multifunction shower cabinets
05/30133622 DC
EN ISO 13790. Thermal performance of buildings. Calculation of energy
use for space heating and cooling
05/30134365 DC
EN 15243. Ventilation for buildings. Calculation for room temperatures
and of load and energy for buildings with room conditioning systems
135 158
91/13933 DC
BS 5911. Precast concrete pipes, fittings and ancillary products. Part 133.
Prestressed pressure pipes and fittings
91/29234 DC
prHD 384.7.701. Electrical installations of buildings. Part 7.
Requirements for special installations for locations. Section 701.
Locations contai ning a bath tub or shower basin
92/33334 DC
prHD 384.5.53 S2. Electrical installations of buildings. Part 5. Selection
and erection of equipment. Chapter 53. Switchgear and controlgear. Sect
ions 532 and 536
92/33336 DC
IEC 364.6.61. Electrical installations of buildings. Part 6. Verification.
Chapter 61. Initial verification. Clause 612.6. Measurement of protecti ve
conductor resistance [64(Secretariat)625] (possible CENELEC HD)
94/104146 DC prEN 1445. Fibre-cement pipelines. Field testing
94/109711 DC
Specification for copper hot water storage combination units for domestic
purposes
94/210594 DC
Local electrical power generating systems up to 3000 kW (possible new
British Stndard)
94/709291 DC
prEN 1507. Ventilation for buildings. Ductwork. Rectangular sheet metal
air ducts. Strength and leakage. Requirements and testing
95/106295 DC
prEN 12056-6. Gravity drainage systems inside buildings. Part 6.
Inspection and testing
96/103195 DC
prEN 12380-2. Ventilating pipework. Air admittance valve system
(AVS). Part 2. Test methods
96/211497 DC
IEC 1534-1. Power track systems. Part 1. General requirements (IEC
document 23/234/CD)
96/710580 DC
BS 5655:Part 10. Subsection 10.1.2. Lifts and service lifts. Part 10.
Specification for the testing and examination of lifts and service lifts. Se
ction 10.1. Electric lifts. Subsection 10.1.2. Commissioning test for
modernised lifts
96/710581 DC
BS 5655:Part 10. Subsection 10.2.2. Lifts and service lifts. Part 10.
Specification for the testing and examination of lifts and service lifts. Se
ction 10.2. Hydraulic lifts. Subsection 10.2.2. Commissioning tests for
modernised lifts
97/104479 DC
prEN 12897. Water supply. Specification for indirectly heated unvented
(closed) hot water storage systems
97/200935 DC
IEC 364. Electrical installations of buildings. Part 5. Selection and
erection of electrical equipment. Revision of Chapter 54. Earthing
arrangeme nts and protective conductors (IEC 64/913/CD)
98/101393 DC prEN 13151. Sanitary appliances. Terminology WI 00163 018
98/201085 DC
prEN 50296. Household electric thermal storage room heaters. Methods
for measuring performance
98/203578 DC
IEC 60364-7-716. Electrical installations of buildings. Part 7-716.
Requirements for special installations or locations. Auxiliary circuits
(IEC d ocument 64/1028/CD)
98/704428 DC Automatic integrated environmental control systems (ISO/CD 16100)
136 158
98/704586 DC
Ventilation for buildings. Performance testing of components/products
for residential ventilation. Part 5. Cowls and roof outlet terminal devices
(prEN 13141-5)
98/706084 DC
Qualification of domestic hot water function of gas-fired appliances for
domestic use (prEN 13203)
98/706424 DC
prEN 81-11. Safety rules for the construction and installation of lifts. Part
11. New lifts in existing buildings
98/706426 DC
ISO/DIS 9386-1. Power operated lifting platforms for persons with
impaired mobility. Rules for safety, dimensions and functional
operations. Part 1. Vertical lifting platforms
98/706427 DC
ISO/DIS 9386-2. Power operated lifting platforms for persons with
impaired mobility. Rules for safety, dimensions and functional
operations. Part 2. Powered stairlifts moving in an inclined plane for
seated, standing and wheelchair users
98/719326 DC
Multi-split system air-conditioners and air-to-air heat pumps. Testing and
rating for performance (ISO/CD 15042)
99/100666 DC
Wall-hung urinals. Functional requirements and test methods (prEN
13407)
99/702254 DC
ISO/DIS 7465. Passenger lifts and service lifts. Guide rails for lifts and
counterweights. T-type
99/702255 DC
prEN 81-5. Safety rules for the construction and installation of lifts and
service lifts. Part 5. Screw lifts
99/702256 DC
service lifts. Part 6. Guided chain lifts
99/702257 DC
service lifts. Part 7. Rack and pinion lifts
BIP 2082:2005
Electrician's Guide to the Building Regulations. Including approved
Document P: Electrical Safety in Dwellings
BS 1125:1987
Specification for WC flushing cisterns (including dual flush cisterns and
flush pipes)
BS 1184:1976 Specification. Copper and copper alloy traps
BS 1206:1974 Specification for fireclay sinks: dimensions and workmanship
BS 1212-1:1990
Float operated valves. Specification for piston type float operated valves
(copper alloy body) (excluding floats)
BS 1212-2:1990
Float operated valves. Specification for diaphragm type float operated
valves (copper alloy body) (excluding floats)
BS 1212-3:1990
Float operated valves. Specification for diaphragm type float operated
valves (plastics bodied) for cold water services only (excluding floats)
BS 1212-4:1991
Float operated valves. Specification for compact type float operated
valves for WC flushing cisterns (including floats)
BS 1244-1:1956 Metal sinks for domestic purposes. Imperial units with metric equivalents
BS 1244-2:1988 Metal sinks for domestic purposes. Specification for sit-on and inset
BS 1251:1987 Specification for open-fireplace components
BS 1254:1981 Specification for WC seats (plastics)
137 158
BS 1390:1990 Specification for baths made from vitreous enamelled sheet steel
BS 1565-1:1949
Specification for galvanized mild steel indirect cylinders, annular or
saddle-back type. Imperial units
BS 1565-2:1973
Specification for galvanized mild steel indirect cylinders, annular or
saddle-back type. Metric units
BS 1566-1:1984
Copper indirect cylinders for domestic purposes. Specification for double
feed indirect cylinders
BS 1566-1:2002
Copper indirect cylinders for domestic purposes. Open vented copper
cylinders. Requirements and test methods
BS 1566-2:1984
Copper indirect cylinders for domestic purposes. Specification for single
feed indirect cylinders
BS 1876:1990 Specification for automatic flushing cisterns for urinals
BS 1968:1953 Specification for floats for ballvalves (copper)
BS 2655-1:1970
Specification for lifts, escalators, passenger conveyors and paternosters.
General requirements for electric, hydraulic and hand-powered lifts
BS 2767:1991 Specification for manually operated copper alloy valves for radiators
BS 2879:1980 Specification for draining taps (screw-down pattern)
BS 2977:1958 Domestic lighting appliances for use with liquefied petroleum gases
BS 3198:1981
Specification for copper hot water storage combination units for domestic
purposes
BS 3250-1:1993
Methods for thermal testing of domestic solid mineral fuel burning
appliances with convection. Flue loss method
BS 3250-2:1994
Methods for thermal testing of domestic solid mineral fuel burning
appliances with convection. Methods for thermal testing of domestic
solid miner al fuel burning appliances with convection. Hood method
BS 3377:1985
Specification for boilers for use with domestic solid mineral fuel
appliances
BS 3380:1982
Specification for wastes (excluding skeleton sink wastes) and bath
overflows
BS 3402:1969 Specification for quality of vitreous china sanitary appliances
BS 3456-102.21:1988
Particular requirements. Storage water heaters
BS 3456-2.21:1972
Particular requirements. Electric immersion heaters
BS 3456-2.26:1973
Particular requirements. Thermal-storage electric room heaters
BS 3561:1962 Specification for non-domestic space heaters burning town gas
BS 3868:1995 Specification for prefabricated drainage stack units in galvanized steel
BS 3943:1979 Specification for plastics waste traps
BS 416-1:1990
Discharge and ventilating pipes and fittings, sand-cast or spun in cast
iron. Specification for spigot and socket systems
BS 417-1:1964
Specification for galvanized low carbon steel cisterns, cistern lids, tanks
and cylinders. Imperial units
138 158
BS 417-2:1987
Specification for galvanized low carbon steel cisterns, cistern lids, tanks
and cylinders. Metric units
BS 4213:1991
Specification for cold water storage and combined feed and expansion
cisterns (polyolefin or olefin copolymer) up to 500 L capacity used for
domes tic purposes
BS 4213:2004
Cisterns for domestic use. Cold water storage and combined feed and
expansion (thermoplastic) cisterns up to 500 l. Specification
BS 4256-2:1972 Specification for oil-burning air heaters. Fixed, flued, fan-assisted heaters
BS 4305-2:1989
Baths for domestic purposes made of acrylic material. Specification for
connecting dimensions
BS 4433-1:1994
Domestic solid mineral fuel fired boilers with rated output up to 45 kW.
Domestic solid mineral fuel fired boilers with rated output up to 45 kw.
Specification for boilers with undergrate ash removal
BS 4433-2:1994
Domestic solid mineral fuel fired boilers with rated output up to 45 kW.
Specification for gravity feed boilers designed to burn small anthracite
BS 4465:1989
Specification for design and construction of electric hoists for both
passengers and materials
BS 4718:1971 Methods of test for silencers for air distribution systems
BS 4773-1.1:1991
Methods for testing and rating air terminal devices for air distribution
systems. Aerodynamic testing. Testing under laboratory conditions
BS 4814:1990
Specification for expansion vessels using an internal diaphragm, for
sealed hot water heating systems
BS 4834:1990
Specification for inset open fires without convection with or without
boilers, burning solid mineral fuels
BS 4856-2:1975
Methods for testing and rating fan coil units, unit heaters and unit
coolers. Thermal and volumetric performance for cooling duties: without
addit ional ducting
BS 4856-3:1975
Methods for testing and rating fan coil units, unit heaters and unit
coolers. Thermal and volumetric performance for heating and cooling
duties; w ith additional ducting
BS 4857-1:1972
Methods for testing and rating terminal reheat units for air distribution
systems. Thermal and aerodynamic performance
BS 4876:1984
Specification for performance requirements for domestic flued oil
burning appliances (including test procedures)
BS 4880-1:1973 Specification for urinals. Stainless steel slab urinals
BS 4979:1986
Methods for aerodynamic testing of constant and variable dual or single
duct boxes, single duct units and induction boxes for air distribution sys
tems
BS 5258-10:1980
Safety of domestic gas appliances. Flueless space heaters (excluding
catalytic combustion heaters) (3rd family gases)
BS 5258-11:1980
Safety of domestic gas appliances. Flueless catalytic combustion heaters
(3rd family gases)
BS 5258-12:1990
Safety of domestic gas appliances. Specification for decorative fuel effect
gas appliances (2nd and 3rd family gases)
139 158
BS 5258-13:1986 Safety of domestic gas appliances. Specification for convector heaters
BS 5258-16:1991
Safety of domestic gas appliances. Specification for inset live fuel effect
gas fires (2nd and 3rd family gases)
BS 5258-5:1989 Safety of domestic gas appliances. Specification for gas fires
BS 5258-7:1977 Safety of domestic gas appliances. Storage water heaters
BS 5258-8:1980
Safety of domestic gas appliances. Combined appliances: gas fire/back
boiler
BS 5258-9:1989
Safety of domestic gas appliances. Specification for combined
appliances: fanned-circulation ducted-air heaters/circulators
BS 5388:1976 Specification for spray taps
BS 5412:1996
Specification for low-resistance single taps and combination tap
assemblies (nominal size and ) suitable for operation at PN 10 max.
and a minimum flow pressure of 0.01 MPa (0.1 bar)
BS 5482-1:2005
Domestic butane- and propane-gas-burning installations. Installations at
permanent dwellings, residential park homes and commercial premises,
with installation pipework sizes not exceeding DN 25 for steel and DN
28 for corrugated stainless steel or copper
BS 5492:1990 Code of practice for internal plastering
BS 5503-2:1977
Vitreous china washdown WC pans with horizontal outlet. Materials,
quality, performance and dimensions other than connecting dimensions
BS 5503-3:1990
Vitreous china washdown WC pans with horizontal outlet. Specification
for WC pans with horizontal outlet for use with 7.5 L maximum flush
capacity cisterns
BS 5504-1:1977, EN
34:1992
Wall hung WC pan. Wall hung WC pan with close coupled cistern.
Connecting dimensions
BS 5504-2:1977, EN
38:1992
Wall hung WC pan. Wall hung WC pan with independent water supply.
Connecting dimensions
BS 5504-3:1977
Wall hung WC pan. Wall hung WC pan. Materials, quality and functional
dimensions other than connecting dimensions
BS 5504-4:1990
Wall hung WC pan. Specification for wall hung WC pans for use with
7.5 L maximum flush capacity cisterns
BS 5505-1:1977, EN
35:1977
Specification for bidets. Pedestal bidets over rim supply only. Connecting
dimensions
BS 5505-3:1977
Specification for bidets. Vitreous china bidets over rim supply only.
Quality, workmanship and functional dimensions other than connecting
dimensi ons.
BS 5506-3:1977
Specification for wash basins. Wash basins (one or three tap holes).
Materials, quality, design and construction
BS 5520:1977 Specification for vitreous china bowl urinals (rimless type)
BS 5546:1990
Specification for installation of gas hot water supplies for domestic
purposes (1st, 2nd and 3rd family gases)
BS 5627:1984
Specification for plastics connectors for use with horizontal outlet
vitreous china WC pans
140 158
BS 5655-10.1.1:1995
Lifts and service lifts. Specification for the testing and examination of
lifts and service lifts. Electric lifts. Commissioning tests for new lif ts
BS 5655-10.2.1:1995
Lifts and service lifts. Specification for the testing and examination of
lifts and service lifts. Hydraulic lifts. Commissioning tests for new li fts
BS 5655-11:1989
Lifts and service lifts. Recommendations for the installation of new, and
the modernization of, electric lifts in existing buildings
BS 5655-12:1989
Lifts and service lifts. Recommendations for the installations of new, and
the modernization of, hydraulic lifts in existing buildings
BS 5655-13:1995 Lifts and service lifts. Recommendations for vandal resistant lifts
BS 5655-14:1995
Lifts and service lifts. Specification for hand-powered service lifts and
platform hoists
BS 5655-3:1989 Lifts and service lifts. Specification for electric service lifts
BS 5655-5:1989
Lifts and service lifts. Specification for dimensions of standard lift
arrangements
BS 5655-6:1990 Lifts and service lifts. Code of practice for selection and installation
BS 5655-6:2002
Lifts and service lifts. Code of practice for the selection and installation
of new lifts
BS 5655-7:1983
Lifts and service lifts. Specification for manual control devices,
indicators and additional fittings
BS 5655-9:1985 Lifts and service lifts. Specification for guide rails
BS 5656-1:1997
Safety rules for the construction and installation of escalators and
passenger conveyors. Specification and proformas for test and
examination of new installations
BS 5656-2:2004
passenger conveyors. Code of practice for the selection, installation and
loc ation of new escalators and moving walks
BS 5685-8:1991
Electricity meters. Specification for impulse operated multiple registers
for use with induction electricity meters
BS 5720:1979
Code of practice for mechanical ventilation and air conditioning in
buildings
BS 5776:1996 Specification for powered stairlifts
BS 5779:1979 Specification for spray mixing taps
BS 5834-2:1983
Surface boxes, guards and underground chambers for gas and waterworks
purposes. Specification for small surface boxes
BS 5834-3:1985
purposes. Specification for large surface boxes
BS 5834-4:1989
purposes. Specification for preformed chambers
BS 5864:1989
Specification for installation in domestic premises of gas-fired ducted-air
heaters of rated input not exceeding 60 kW
BS 5864:2004
Installation and maintenance of gas-fired ducted air heaters of rated input
not exceeding 70 kW net (2nd and 3rd family gases). Specification
141 158
BS 5871-1:1991
Specification for installation of gas fires, convector heaters, fire/back
boilers and decorative fuel effect gas appliances. Gas fires, convector
heaters and fire/back boilers (1st, 2nd and 3rd family gases)
BS 5871-1:2005
Specification for the installation and maintenance of gas fires, convector
heaters, fire/back boilers and decorative fuel effect gas appliances. G as
fires, convector heaters, fire/back boilers and heating stoves (2nd and 3rd
family gases)
BS 5871-2:1991
boilers and decorative fuel effect gas appliances. Inset live fuel effec t
gas fires of heat input not exceeding 15 kW (2nd and 3rd family gases)
BS 5871-2:2001
boilers and decorative fuel effect gas appliances. Inset live fuel effec t
gas fires of heat input not exceeding 15 kW, and fire/back boilers (2nd
and 3rd family gases)
BS 5871-2:2005
heaters, fire/back boilers and decorative fuel effect gas appliances. I nset
live fuel effect gas fires of heat input not exceeding 15 kW, and fire/back
boilers (2nd and 3rd family gases)
BS 5871-3:1991
boilers and decorative fuel effect gas appliances. Decorative fuel effec t
gas appliances of heat input not exceeding 15 kW (2nd and 3rd family
gases)
BS 5871-3:2001
boilers and decorative fuel effect gas appliances. Decorative fuel effec t
gas appliances of heat input not exceeding 20 kW (2nd and 3rd family
gases)
BS 5871-3:2005
heaters, fire/back boilers and decorative fuel effect gas appliances. D
ecorative fuel effect gas appliances of heat input not exceeding 20 kW
(2nd and 3rd family gases)
BS 5900:1991 Specification for powered domestic lifts
BS 5900:1999
Specification for powered domestic lifts with partially enclosed cars and
no lift-well enclosures
BS 5925:1991
Code of practice for ventilation principles and designing for natural
ventilation
BS 5965:1980 Specification for manually driven balanced personal homelifts
BS 5978-1:1989
Safety and performance of gas-fired hot water boilers (60 kW to 2 MW
input). Specification for general requirements
BS 5978-2:1989
input). Specification for additional requirements for boilers with
atmospheri c burners
BS 5978-3:1989
input). Specification for additional requirements for boilers with forced
or induced draught burners
142 158
BS 5991:1989
Specification for indirect gas fired forced convection air heaters with
rated heat inputs up to 2 MW for industrial and commercial space
heating: safety and performance requirements (excluding electrical
requirements (2nd family gases)
BS 6144:1990
Specification for expansion vessels using an internal diaphragm, for
unvented hot water supply systems
BS 6282-1:1982
Devices with moving parts for the prevention of contamination of water
by backflow. Specification for check valves of nominal size up to and
inclu ding DN 54
BS 6282-2:1982
by backflow. Specification for terminal anti-vacuum valves of nominal
size up to and including DN 54
BS 6282-3:1982
by backflow. Specification for in-line anti-vacuum valves of nominal size
u p to and including DN 42
BS 6282-4:1982
by backflow. Specification for combined check and anti-vacuum valves
of nom inal size up to and including DN 42
BS 6283-1:1991
Safety and control devices for use in hot water systems. Specification for
expansion valves for pressures up to and including 10 bar
BS 6283-4:1991
Safety and control devices for use in hot water systems. Specification for
drop-tight pressure reducing valves of nominal size up to and including
DN 50 for supply pressures up to and including 12 bar
BS 6332-2:1983
Thermal performance of domestic gas appliances. Specification for
thermal performance of gas fires
BS 6332-3:1984
thermal performance of combined appliances: gas fire/back boiler
BS 6332-4:1983
thermal performance of independent convector heaters
BS 6332-6:1990
thermal performance of combined appliances: fanned-circulation ducted-
air heater /circulator
BS 6340-3:1985
Shower units. Specification for prefabricated shower enclosures and
shower cabinets
BS 6340-4:1984 Shower units. Specification for shower heads and related equipment
BS 6351-2:1983
Electric surface heating. Guide to the design of electric surface heating
systems
BS 6351-3:1983
Electric surface heating. Code of practice for the installation, testing and
maintenance of electric surface heating systems
BS 6452-1:1984
Beads for internal plastering and dry lining. Specification for galvanized
steel beads
BS 6465-1:1994
Sanitary installations. Code of practice for scale of provision, selection
and installation of sanitary appliances
143 158
BS 6465-2:1996
Sanitary installations. Code of practice for space requirements for
sanitary appliances
BS 6644:1991
Specification for installation of gas-fired hot water boilers of rated inputs
between 60 kW and 2 MW (2nd and 3rd family gases)
BS 6644:2005
Specification for Installation of gas-fired hot water boilers of rated inputs
between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases)
BS 6675:1986 Specification for servicing valves (copper alloy) for water services
BS 6798:1987
Specification for installation of gas-fired hot water boilers of rated input
not exceeding 60 kW
BS 6880-1:1988
greater than 45 kW. Fundamental and design considerations
BS 6880-2:1988
greater than 45 kW. Selection of equipment
BS 6880-3:1988
greater than 45 kW. Installation, commissioning and maintenance
BS 6896:1991
Specification for installation of gas-fired overhead radiant heaters for
industrial and commercial heating (2nd and 3rd family gases)
BS 699:1984 Specification for copper direct cylinders for domestic purposes
BS 7074-1:1989
equipment for sealed water systems. Code of practice for domestic heati
ng and hot water supply
BS 7074-2:1989
equipment for sealed water systems. Code of practice for low and
medium temperature hot water heating systems
BS 7074-3:1989
equipment for sealed water systems. Code of practice for chilled and co
ndenser systems
BS 7158:1989 Specification for plastics inspection chambers for drains
BS 7181:1989
Specification for storage cisterns up to 500 L actual capacity for water
supply for domestic purposes
BS 7206:1990 Specification for unvented hot water storage units and packages
BS 7261:1990
Safety of small non-domestic flueless space heaters burning 3rd family
gases
BS 7350:1990
Specification for double regulating globe valves and flow measurement
devices for heating and chilled water systems
BS 7358:1990
Specification for close coupled suites with flush capacity of 7.5 L
maximum
BS 7478:1991 Guide to selection and use of thermostatic radiator valves
BS 7491-1:1991
Glass fibre reinforced plastics cisterns for cold water storage.
Specification for one-piece cisterns of capacity up to 500 L
BS 7491-2:1992
Specification for one-piece cisterns of nominal capacity from 500 L to
25000 L
144 158
BS 7491-3:1994
Specification for sectional tanks
BS 7556:1992
Thermostatic radiator valves. Specification for dimensions and details on
connection
BS 7797:1998 Specification for industrial duct heaters using metal-sheathed elements
BS 7798:1998
Specification for industrial immersion heaters using metal-sheathed
elements
BS 7801:1995
Code of practice for safe working on escalators and passenger conveyors
in use
BS 7801:2004
Escalators and moving walks. Code of practice for safe working on
escalators and moving walks
BS 7942:2000 Thermostatic mixing valves for use in care establishments
BS 7977-1:2002
Specification for safety and rational use of energy of domestic gas
appliances. Radiant/convectors
BS 7977-2:2003
Specification for safety and rational use of energy of domestic gas
appliances. Combined appliances. Gas fire/back boiler
BS 8206-1:1985 Lighting for buildings. Code of practice for artificial lighting
BS 8301:1985 Code of practice for building drainage
BS 8313:1997 Code of practice for accommodation of building services in ducts
BS 8433:2004 Microwavable personal warmers. Specification
BS 855:1990
Specification for welded steel boilers for central heating and indirect hot
water supply (rated output 44 kW to 3 MW)
BS EN 1020:1998
Non-domestic gas-fired forced convection air heaters for space heating
not exceeding a net heat input of 300 kW, incorporating a fan to assist tra
nsportation of combustion air and/or combustion products
BS EN 111:1999 Wall-hung hand rinse basins. Connecting dimensions
BS EN 111:2003 Wall-hung hand rinse basins. Connecting dimensions
BS EN 1111:1999
Sanitary tapware. Thermostatic mixing valves (PN 10). General technical
specification
BS EN 115:1995
passenger conveyors
BS EN 1196:1998
Domestic and non-domestic gas-fired air heaters. Supplementary
requirements for condensing air heaters
BS EN 12056-2:2000
Gravity drainage systems inside buildings. Sanitary pipework, layout and
calculation
BS EN 12056-4:2000
Gravity drainage systems inside buildings. Wastewater lifting plants.
Layout and calculation
BS EN 12056-5:2000
Gravity drainage systems inside buildings. Installation and testing,
instructions for operation, maintenance and use
BS EN 12109:1999 Vacuum drainage systems inside buildings
BS EN 12159:2000 Builders hoists for persons and materials with vertically guided cages
BS EN 12170:2002
Heating systems in buildings. Procedure for the preparation of documents
for operation, maintenance and use. Heating systems requiring a trained o
perator
145 158
BS EN 12171:2002
Heating systems in buildings. Procedure for the preparation of documents
for operation, maintenance and use. Heating systems not requiring a train
ed operator
BS EN 12236:2002
Ventilation for buildings. Ductwork hangers and supports. Requirements
for strength
BS EN 12237:2003
Ventilation for buildings. Ductwork. Strength and leakage of circular
sheet metal ducts
BS EN 12238:2001
Ventilation for buildings. Air terminal devices. Aerodynamic testing and
rating for mixed flow application
BS EN 12239:2001
Ventilation for buildings. Air terminal devices. Aerodynamic testing and
rating for displacement flow applications
BS EN 12327:2000
Gas supply systems. Pressure testing, commissioning and
decommissioning procedures. Functional requirements
BS EN 12405:2002 Gas meters. Gas-volume electronic conversion devices
BS EN 12405-1:2005 Gas meters. Conversion devices. Volume conversion
BS EN 12464-1:2002 Light and lighting. Lighting of work places. Indoor work places
BS EN 12480:2002 Gas meters. Rotary displacement gas meters
BS EN 1253-1:1999 Gullies for buildings. Requirements
BS EN 1253-1:2003 Gullies for buildings. Requirements
BS EN 1253-2:1999 Gullies for buildings. Test methods
BS EN 1253-2:2003 Gullies for buildings. Test methods
BS EN 1253-3:1999 Gullies for buildings. Quality control
BS EN 1253-4:2000 Gullies for buildings. Access covers
BS EN 1253-5:2003 Gullies for buildings. Gullies with light liquids closure
BS EN 12541:2002
Sanitary tapware. Pressure flushing valves and automatic closing urinal
valves PN 10
BS EN 12589:2001
Ventilation for buildings. Air terminal units. Aerodynamic testing and
rating of constant and variable rate terminal units
BS EN 12599:2000
Ventilation for buildings. Tests procedures and measuring methods for
handing over installed ventilation and air conditioning systems
BS EN 1264-2:1998
Floor heating. Systems and components. Determination of the thermal
output
BS EN 1264-3:1998
Floor heating. Systems and components. Floor heating. Systems and
components. Dimensioning
BS EN 1264-4:2001 Floor heating. Systems and components. Installation
BS EN 1266:2002
Independent gas-fired convection heaters incorporating a fan to assist
transportation of combustion air and/or flue gases
BS EN 12764:2004 Sanitary appliances. Specification for whirlpool baths
BS EN 12809:2001
Residential independent boilers fired by solid fuel. Nominal heat output
up to 50 kW. Requirements and test methods
BS EN 12828:2003 Heating systems in buildings. Design for water-based heating systems
BS EN 12831:2003
Heating systems in buildings. Method for calculation of the design heat
load
146 158
BS EN 1286:1999
Sanitary tapware. Low pressure mechanical mixing valves. General
technical specification
BS EN 1287:1999
Sanitary tapware. Low pressure thermostatic mixing valves. General
technical specifications
BS EN 13015:2001 Maintenance for lifts and escalators. Rules for maintenance instructions
BS EN 13030:2001
Ventilation for buildings. Terminals. Performance testing of louvres
subjected to simulated rain
BS EN 13053:2001
Ventilation for buildings. Air handling units. Ratings and performance
for units, components and sections
BS EN 13141-1:2004
for residential ventilation. Externally and internally mounted air transfer
devices
BS EN 13141-2:2004
for residential ventilation. Exhaust and supply air terminal devices
BS EN 13141-6:2004
for residential ventilation. Exhaust ventilation system packages used in a
s ingle dwelling
BS EN 13142:2004
Ventilation for buildings. Components/products for residential
ventilation. Required and optional performance characteristics
BS EN 13180:2002
Ventilation for buildings. Ductwork. Dimensions and mechanical
requirements for flexible ducts
BS EN 13181:2001
Ventilation for buildings. Terminals. Performance testing of louvres.
Performance testing of louvres subject to simulated sand
BS EN 1319:1999
Domestic gas-fired forced convection air heaters for space heating, with
fan-assisted burners not exceeding a net heat input of 70 kW
BS EN 13229:2001
Inset appliances including open fires fired by solid fuels. Requirements
and test methods
BS EN 13264:2001
Ventilation for buildings. Floor mounted air terminal devices. Tests for
structural classification
BS EN 13278:2003 Open fronted gas-fired independent space heaters
BS EN 13310:2003 Kitchen sinks. Functional requirements and test methods
BS EN 13403:2003
Ventilation for buildings. Non metallic ducts. Ductwork made from
insulation ductboards
BS EN 13410:2001
Gas-fired overhead radiant heaters. Ventilation requirements for non-
domestic premises
BS EN 13465:2004
Ventilation for buildings. Calculation methods for the determination of
air flow rates in dwellings
BS EN 13558:2003
Specifications for impact modified extruded acrylic sheets for shower
trays for domestic purposes
BS EN 13559:2003
Specifications for impact modified coextruded ABS/Acrylic sheets for
baths and shower trays for domestic purposes
BS EN 13564-1:2002 Anti-flooding devices for buildings. Requirements
BS EN 13564-2:2002 Anti-flooding devices for buildings. Test methods
BS EN 13564-3:2003 Anti-flooding devices for buildings. Quality assurance
147 158
BS EN 13779:2004
Ventilation for non-residential buildings. Performance requirements for
ventilation and room-conditioning systems
BS EN 13842:2004
Oil fired forced convection air heaters. Stationary and transportable for
space heating
BS EN 13904:2003 Low resistance shower outlets for sanitary tapware
BS EN 13905:2003 Low resistance shower hoses for sanitary tapware
BS EN 14037-1:2003
Ceiling mounted radiant panels supplied with water at temperature below
120C. Technical specifications and requirements
BS EN 14037-2:2003
120C. Test methods for thermal output
BS EN 14037-3:2003
120C. Rating method and evaluation of radiant thermal output
BS EN 14134:2004
Ventilation for buildings. Performance testing and installation checks of
residential ventilation systems
BS EN 14154-3:2005 Water meters. Test methods and equipment
BS EN 14239:2004
Ventilation for buildings. Ductwork. Measurement of ductwork surface
area
BS EN 14240:2004 Ventilation for buildings. Chilled ceilings. Testing and rating
BS EN 14428:2004 Shower enclosures. Functional requirements and test methods
BS EN 1487:2000 Building valves. Hydraulic safety groups. Tests and requirements
BS EN 1488:2000 Building valves. Expansion groups. Tests and requirements
BS EN 1489:2000 Building valves. Pressure safety valves. Tests and requirements
BS EN 1491:2000 Building valves. Expansion valves. Tests and requirements
BS EN 1505:1998
Ventilation for buildings. Sheet metal air ducts and fittings with
rectangular cross-section. Dimensions
BS EN 1596:1998
Specification for dedicated liquefied petroleum gas appliances. Mobile
and portable non-domestic forced convection direct fired air heaters
BS EN 1775:1998
Gas supply. Gas pipework in buildings. Maximum operating pressure 5
bar. Functional recommendations
BS EN 215:2004 Thermostatic radiator valves. Requirements and test methods
BS EN 215-1:1991 Thermostatic radiator valves. Requirements and test methods
BS EN 232:1992 Baths. Connecting dimensions
BS EN 232:2003 Baths. Connecting dimensions
BS EN 233:1997
Wallcoverings in roll form. Specification for finished wallpapers, wall
vinyls and plastics wallcoverings
BS EN 246:1992 Sanitary tapware. General specifications for flow rate regulators
BS EN 246:2003 Sanitary tapware. General specifications for flow rate regulators
BS EN 248:1992
Sanitary taps: general technical specifications for electrodeposited nickel
chrome coatings
BS EN 248:2002
Sanitary tapware. General specification for electrodeposited coatings of
Ni-Cr
BS EN 251:1992 Shower trays. Connecting dimensions
BS EN 251:2003 Shower trays. Connecting dimensions
BS EN 259:1997 Wallcoverings in roll form. Specification for heavy duty wallcoverings
148 158
BS EN 259-1:2001 Wallcoverings in roll form. Heavy duty wallcoverings. Specifications
BS EN 259-2:2001
Wallcoverings in roll form. Heavy duty wallcoverings. Determination of
impact resistance
BS EN 274:1993
Sanitary tapware. Waste fittings for basins, bidets and baths. General
technical specifications
BS EN 274-1:2002 Waste fittings for sanitary appliances. Requirements
BS EN 274-2:2002 Waste fittings for sanitary appliances. Test methods
BS EN 274-3:2002 Waste fittings for sanitary appliances. Quality control
BS EN 297:1994
Gas-fired central heating boilers. Type B and B boilers fitted with
atmospheric burners of nominal heat input not exceeding 70 k W
BS EN 303-1:1992
Heating boilers. Heating boilers with forced draught burners.
Terminology, general requirements, testing and marking
BS EN 303-1:1999
Heating boilers. Heating boilers with forced draught burners.
Terminology, general requirements, testing and marking
BS EN 303-2:1999
Heating boilers. Heating boilers with forced draught burners. Heating
boilers with forced draught burners. Special requirements for boilers with
a tomizing oil burners
BS EN 303-3:1999
Heating boilers. Heating boilers with forced draught burners. Gas-fired
central heating boilers. Assembly comprising a boiler body and a forced
dr aught burner
BS EN 303-4:1999
Heating boilers. Heating boilers with forced draught burners. Heating
boilers with forced draught burners. Special requirements for boilers with
f orced draught oil burners with outputs up to 70 kW and a maximum
operating pressure of 3 bar. Terminology, special requirements, testing
and marking
BS EN 303-6:2000
Heating boilers. Heating boilers with forced draught burners. Specific
requirements for the domestic hot water operation of combination boilers
wi th atomizing oil burners of nominal heat input not exceeding 70 kW
BS EN 304:1992 Heating boilers. Test code for heating boilers for atomizing oil burners
BS EN 31:1999 Pedestal wash basins. Connecting dimensions
BS EN 32:1999 Wall-hung wash basins. Connecting dimensions
BS EN 329:1997
Sanitary tapware. Waste fittings for shower trays. General technical
specifications
BS EN 33:1999
Pedestal W.C. pans with close-coupled flushing cistern. Connecting
dimensions
BS EN 33:2003
Pedestal W.C. pans with close-coupled flushing cistern. Connecting
dimensions
BS EN 35:2000 Pedestal bidets with over-rim supply. Connecting dimensions
BS EN 36:1999 Wall-hung bidets with over-rim supply. Connecting dimensions
BS EN 37:1999
Pedestal W.C. pans with independent water supply. Connecting
dimensions
BS EN 411:1995 Sanitary tapware. Waste fittings for sinks. General technical
BS EN 416-1:1999 Single burner gas-fired overhead radiant-tube heaters. Safety
BS EN 419-1:2000 Non-domestic gas-fired overhead luminous radiant heaters. Safety
149 158
BS EN 437:2003 Test gases. Test pressures. Appliance categories
BS EN 442-1:1996
Specification for radiators and convectors. Technical specifications and
requirements
BS EN 442-2:1997 Specification for radiators and convectors. Test methods and rating
BS EN 442-3:1997 Specification for radiators and convectors. Evaluation of conformity
BS EN 442-3:2003 Specification for radiators and convectors. Evaluation of conformity
BS EN 449:1997
Specification for dedicated liquefied petroleum gas appliances. Domestic
flueless space heaters (including diffusive catalytic combustion heaters)
BS EN 449:2002
Specification for dedicated liquefied petroleum gas appliances. Domestic
flueless space heaters (including diffusive catalytic combustion heaters)
BS EN 461:1999
Specification for dedicated liquefied petroleum gas appliances. Flueless
non-domestic space heaters not exceeding 10 kW
BS EN 483:2000
Gas-fired central heating boilers. Type C boilers of nominal heat input
not exceeding 70 kW
BS EN 50171:2001 Central power supply systems
BS EN 50172:2004, BS
5266-8:2004
Emergency escape lighting systems
BS EN 50193:1997
Closed electrical instantaneous water heaters. Methods for measuring
performance
BS EN 50310:2000
Application of equipotential bonding and earthing in buildings with
information technology equipment
BS EN 50350:2004
Charging control systems for household electric room heating of the
storage type. Methods for measuring performance
BS EN 509:2000 Decorative fuel-effect gas appliances
BS EN 525:1998
Non-domestic direct gas-fired forced convection air heaters for space
heating not exceeding a net heat input of 300 kW
BS EN 60240-1:1994,
IEC 60240-1:1992
Characteristics of electric infra-red emitters for industrial heating. Short
wave infra-red emitters
BS EN 60335-2-
30:1993
Particular requirements. Room heaters
BS EN 60335-2-
35:1995
Particular requirements. Instantaneous water heaters
BS EN 60335-2-
53:2003
Particular requirements for sauna heating appliances
BS EN 60335-2-
84:2003
Particular requirements for toilets
BS EN 60335-2-
96:2002
Particular requirements for flexible sheet heating elements for room heat
ing
BS EN 60379:2004
Methods for measuring the performance of electric storage water-heaters
for household purposes
BS EN 61107:1996,
IEC 61107:1996
Data exchange for meter reading, tariff and load control. Direct local data
exchange
150 158
BS EN 61142:1993,
IEC 61142:1993
Data exchange for meter reading, tariff and load control. Local bus data
exchange
BS EN 62052-21:2004
Electricity metering equipment (AC). General requirements, tests and test
conditions. Tariff and load control equipment
BS EN 62053-31:1999,
IEC 62053-31:1998
Electricity metering equipment (a.c.). Particular requirements. Pulse
output devices for electromechanical and electronic meters (two wires
only)
BS EN 62053-61:1999,
IEC 62053-61:1998
Electricity metering equipment (a.c.). Particular requirements. Power
consumption and voltage requirements
BS EN 62054-11:2004
Electricity metering (a.c.). Tariff and load control. Particular
requirements for electronic ripple control receivers
BS EN 62054-21:2004
Electricity metering (a.c.). Tariff and load control. Particular
requirements for time switches
BS EN 62056-31:2000
Electricity metering. Data exchange for meter reading, tariff and load
control. Use of local area networks on twisted pair with carrier signalling
BS EN 62056-61:2002,
IEC 62056-61:2002
Electricity metering. Data exchange for meter reading, tariff and load
control. Object identification system (OBIS)
BS EN 621:1998
Non-domestic gas-fired forced convection air heaters for space heating
not exceeding a net heat input of 300 kW, without a fan to assist
transport ation of combustion air and/or combustion products
BS EN 625:1996
Gas-fired central heating boilers. Specific requirements for the domestic
hot water operation of combination boilers of nominal heat input not exc
eeding 70 kW
BS EN 627:1996
Specification for data logging and monitoring of lifts, escalators and
passenger conveyors
BS EN 656:2000
Gas-fired central heating boilers. Type B boilers of nominal heat input
exceeding 70 kW but not exceeding 300 kW
BS EN 677:1998
Gas-fired central heating boilers. Specific requirements for condensing
boilers with a nominal heat input not exceeding 70 kW
BS EN 777-1:1999
Multi-burner gas-fired overhead radiant tube heater systems for non-
domestic use. System D, safety
BS EN 777-2:1999
domestic use. System E, safety
BS EN 777-3:2000
domestic use. System F, safety
BS EN 778:1998
Domestic gas-fired forced convection air heaters for space heating not
exceeding a net heat input of 70 kW, without a fan to assist
transportation of combustion air and/or combustion products
BS EN 779:2002
Particulate air filters for general ventilation. Determination of the
filtration performance
BS EN 80:2001 Wall-hung urinals. Connecting dimensions
BS EN 806-1:2000
Specifications for installations inside buildings conveying water for
human consumption. General
BS EN 806-2:2005
Specifications for installations inside buildings conveying water for
human consumption. Design
151 158
BS EN 810:1997
Dehumidifiers with electrically driven compressors. Rating tests,
marking, operational requirements and technical data sheet
BS EN 81-1:1998 Safety rules for the construction and installation of lifts. Electric lifts
BS EN 81-2:1998 Safety rules for the construction and installation of lifts. Hydraulic lifts
BS EN 81-3:2001
Safety rules for the construction and installation of lifts. Electric and
hydraulic service lifts
BS EN 816:1997 Sanitary tapware. Automatic shut-off valves PN 10
BS EN 817:1998
Sanitary tapware. Mechanical mixers (PN 10). General technical
specifications
BS EN 81-70:2003
Safety rules for the construction and installation of lifts. Particular
applications for passenger and goods passenger lifts. Accessibility to lif ts
for persons including persons with disability
BS EN 81-71:2005
Safety rules for the construction and installation of lifts. Vandal resistant
lifts
BS EN 81-72:2003
Safety rules for the construction and installation of lifts. Particular
applications for passenger and goods passenger lifts. Firefighters lifts
BS EN 81-80:2003
Safety rules for the construction and installation of lifts. Rules for the
improvement of safety of existing passenger and goods passenger lifts
BS EN 832:2000
Thermal performance of buildings. Calculation of energy use for heating.
Residential buildings
BS EN 834:1995
Heat cost allocators for the determination of the consumption of room
heating radiators. Appliances with electrical energy supply
BS EN 835:1995
Heat cost allocators for the determination of the consumption of room
heating radiators. Appliances without an electrical energy supply, based
on the evaporation principle
BS EN 89:2000 Gas-fired storage water heaters for the production of domestic hot water
BS EN 997:1999 WC pans with integral trap
BS EN 997:2003 WC pans and WC suites with integral trap
BS EN ISO 13790:2004
Thermal performance of buildings. Calculation of energy use for space
heating
BS IEC 60736:1982 Testing equipment for electrical energy meters
BS ISO 18738:2003 Lifts (elevators). Measurement of lift ride quality
BS ISO 4190-1:1999 Lift (US: Elevator) installation. Class I, II, III and VI lifts
BS ISO 4190-2:2001 Lift (US: Elevator) installation. Class IV lifts
CP 1018:1971
Electric floorwarming systems for use with off-peak and similar supplies
of electricity
CP 3008:1970 The use of transportable industrial space heaters
CP 342-2:1974
Code of practice for centralized hot water supply. Buildings other than
individual dwellings
DD 222:1996 Specification for rack and pinion lifts
DD 84:1982
Method of test for the resistance to freezing of gas-fired instantaneous
water heaters
152 158
DD CEN/TS 81-
29:2004
Safety rules for the construction and installation of lifts. Safety rules for
the construction and installation of lifts. Lifts for the transport of persons
and goods. Interpretations related to EN 81-20 up to EN 81-28 (includes
EN 81-1:1998 and EN 81-2:1998)
DD ENV 12097:1997
Ventilation for buildings. Ductwork. Requirements for ductwork
components to facilitate maintenance of ductwork systems
DD ENV 1259-1:1994
Single burner gas fired overhead radiant tube heaters and non-domestic
gas-fired overhead luminous radiant heaters. Requirements and test
methods for establishing the rational use of energy. Radiometric method
A
DD ENV 1259-2:1997
B
DD ENV 1259-3:1997
C
DD ENV 14236:2002 Ultrasonic domestic gas meters
DD ISO/TS 22559-
1:2004
Safety requirements for lifts (elevators). Global safety requirements
(GESR's) for lifts (elevators)
HB 10178:2000 Hot and Cold Water Supply. 2nd edition
KIT 170 BS 5655 series. Lifts and service lifts kit
KIT 171 BS 5655 Lifts and service lifts and codes of practice kit
KIT 172 BS EN 81 series. Lifts kit
KIT 173 Escalators and moving walks kit
KIT 174 Gas fire appliances kit (BS 5871)
KIT 175 Lifts and escalators safety kit
PAS 32-1:1999
Specification for examination and test of new lifts before putting into
service. Electric traction lifts
PAS 32-2:1999
Specification for examination and test of new lifts before putting into
service. Hydraulic lifts
PAS 33:1999
Specification for the design, installation and commissioning of gas fired
central heating systems in domestic premises
PAS 42:2002
Method of test for establishing the efficiency of decorative fuel effect gas
fires
PD 6579:1995, CR
1749:1995
European scheme for the classification of gas appliances according to the
method of evacuation of the products of combustion (types)
PD 6579:1999, CR
1749:1998
method of evacuation of the products of combustion (types)
PD CR 13737:2000
Implementation guide for functional standards prepared by CEN/TC 234
'Gas supply'
PD CR 14378:2002, CR
14378:2002
Ventilation for buildings. Experimental determination of mechanical
energy loss coefficients of air handling components
PD CR 1749:2001
method of evacuation of the products of combustion (Types)
PD CR 1752:1999 Ventilation for buildings. Design criteria for the indoor environment
153 158
PD IEC TR
61354:1995, IEC TR
61354:1995
Electricity meters. Marking of auxiliary terminals for tariff devices
PD IEC TR 62059-
11:2002, IEC TR 62059-
11:2002
Electricity metering equipment. Dependability. General concepts
PD IEC TR 62059-
21:2002
Electricity metering equipment. Dependability. Collection of meter
dependability data from the field
PD ISO/TR 16765:2003 Comparison of worldwide safety standards on lifts for firefighters
154 158
Filename
BSI 2A 110.pdf
BSI 2A 60.pdf
BSI BS 0-1.pdf
BSI BS 0-2.pdf
BSI BS 0-3.pdf
BSI BS 122-1.pdf
BSI BS 1259.pdf
BSI BS 144.pdf
BSI BS 171.pdf
BSI BS 188.pdf
BSI BS 215 Part1.pdf
BSI BS 245.pdf
BSI BS 350.pdf
BSI BS 358.pdf
BSI BS 373.pdf
BSI BS 381C.pdf
BSI BS 410-1.pdf
BSI BS 410-2.pdf
BSI BS 4652.pdf
BSI BS 476 SEC31_1.pdf
BSI BS 5306-0.pdf
BSI BS 5306-1.pdf
BSI BS 5306-2.pdf
BSI BS 5306-3.pdf
BSI BS 5306-4.pdf
BSI BS 5306-5_1.pdf
BSI BS 5306-5_2.pdf
BSI BS 5306-6_1.pdf
BSI BS 5306-6_2.pdf
BSI BS 5306-8.pdf
BSI BS 5345.pdf
BSI BS 544.pdf
BSI BS 546.pdf
BSI BS 5572.pdf
BSI BS 5839-1.pdf
BSI BS 5839-3.pdf
BSI BS 5839-4.pdf
BSI BS 5839-5.pdf
BSI BS 5839-6.pdf
BSI BS 5839-8.pdf
BSI BS 5839-9.pdf
BSI BS 593.pdf
BSI BS 600.pdf
BSI BS 615.pdf
BSI BS 6150.pdf
BSI BS 6259.pdf
BSI BS 6387.pdf
BSI BS 675.pdf
BSI BS 676.pdf
BSI BS 691.pdf
BSI BS 700-1.pdf
BSI BS 700-2.pdf
BSI BS 700-3.pdf
BSI BS 701.pdf
BSI BS 718.pdf
BSI BS 7211.pdf
BSI BS 734C.pdf
BSI BS 88 Part5.pdf
BSI BS 88 Part6.pdf
BSI BS 88 Sec 2_2.pdf
BSI BS 89 Part2.pdf
BSI BS 89 Part3.pdf
BSI BS EN 88.pdf
Description
Steel Nuts (Unified Hexagons and Unified Threads) for shear bolts for aircraft
Cadmium-plated steel hexagonal-headed shear bolts (B.S.F. Threads)
A standard for standards - Part 1: Guide to the context, aims and general principles
A standard for standards - Part 2: Recommendations for committee procedures
A standard for standards - Part 3: Specification for structure, drafting and presentation
Milling Cutters
Intrinsically safe electrical appartatus and circuits
Specification for Coal tar creosote for wood preservation
Specification for power transformers
Methods for determination of the viscosity of liquids
Specification for Aluminium conductors and aluminium conductors, steel-reinforced -
For overhead power transmission - Part 1: Aluminium stranded conductors
Specification for Aluminium conductors and aluminium conductors, steel-reinforced -
For overhead power transmission - Part 2: Aluminium conductors, steel-reeinforced
Specification for mineral solvents(white spirit and related hydrocarbon solvents) for
paints and other purposed
Conversion factors for units
Method for the measurement of voltage with sphere-gaps - (One sphere earthed)
Methods of testing small clear specimens of timber
Specification for Colours for identification, coding and special purposes
Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth
Test sieves - Technical requirements and testing - Part 2: test sieves of perforated metal
Specification for spur and helical gears - Part 1: Basic rack form, pitches and
accuracy(diametral pitch series)
Specification for spur and helical gears - Part 2: Basic rack form, pitches and accuracy(1 to
50 metric module)
Specification for Zinc-rich priming paint(Organic media)
Fire tests on building materials and structures - Part 10: Guide to the principles and
application of fire testing
Fire tests on building materials and structures - Part 31: Methods for measuring smoke
penetration through doorsets and shutter assemblies - Section 31.1 Method of measurement
under ambient temperature conditions
Emergency lighting - Part 4: Code of practice for design, installation, maintenance and use
of optical fibre systems
Fire extinguishing installations and equipment on premises - Part 0: Guide for the selection
of installed systems and other fire equipment
Code of Practice - Fire extinguishing installations and equipment on premises - Part 1:
Hydrant systems, hosereels and foam inlets (Formerly CP402.101)
Fire extinguishing installations and equipment on premises - Part 2: Specification for
sprinkler systems

BSI List

Uploaded by

Copyright:

Available Formats

BSI List

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BSI List

Uploaded by

Copyright:

Available Formats

Code of Practice

Standard Number Title

You might also like