Manitowoc 12000-1

Product Guide
ASME B30.5
Metric / Imperial
Features
110 t (120 USt) capacity
70,1 m (230 ft) heavy-lift boom
Max boom + jib combination:
61 m (200 ft) + 21,3 m (70 ft)
213 kW (285 HP) engine
163 m/min (525 fpm) maximum line speed
110 kN (25,000 lb) rated line pull
Features
2
Self-erecting counterweight
Eliminates the need for an assist crane, and also
allows for reduced counterweight chart operation.
Energy saving systems
Green-Engine mode conserves fuel during full speed drum
operation under load, at a lower engine RPM. Other available
options include Green-Winch Mode and Auto Idling Stop Mode.
Retractable crawlers
Crawlers can be extended and retracted for better jobsite
maneuverability. On some models, these crawlers can also ship
attached for easier transport and quicker setup.
Contents
Manitowoc 12000-1 3
Specications 4
Outline dimensions 7
Performance data 12
Load chart notes 13
Boom combinations 14
Main boom range / load charts 16
Fixed jib range / load charts 18
Clamshell 21
Manitowoc Crane Care 22
Specifications
4
Maximum pressure rating . . . . . 31.9 MPa (4,630 psi)
Load hoist and propel . . . . . . . . . . . . . . . 2 Piston pumps
Boom hoist . . . . . . . . . . . . . . . . . . . . . 1 Piston pump
Swing . . . . . . . . . . . . . . . . . . . . . . . 1 Piston pump
Control system and auxiliary . . . . . . . .2 Gear pumps
Brake cooling system . . . . . . . . . . . . . 2 Gear pumps
Hydraulic tank . . . . . . . . . . 535 liter (141 US gallon)
Cooling: Oil-to-air heat exchanger (plate-fin type).
Filtration: Full-flow and bypass type with replaceable
paper element.

Drums
Front and rear drums for load hoist powered by variable
displacement piston-type motors, driven through
planetary reducers. Powered hoisting/lowering and
free-fall operation is standard. Drum turn indicators for
front and rear drums are also standard.
Brake & Clutches (compatible): Forced-circulation
oil-cooled wet-type multi-disc brakes, each using
positive and negative actuation. An external ratchet is
fitted for locking the drums.
Drums: (front and rear) 614 mm (24.2") P.C.D. x
617 mm (24.3") wide drums, grooved for 26.0 mm
wire rope.
Wire rope capacity:
Front drum 260 m (853 ft) working length
Rear drum 230 m (754 ft) working length
Line speed: Single line on the first drum layer
Hoisting: . . . . . . . . . . . . . . . . . . 120m/min (390 ft/min)
Lowering: . . . . . . . . . . . . . . . . . 120m/min (390 ft/min)
Optional third drum: free-fall is optional; drum
grooved for 26 mm wire rope. Wire rope capacity
working length is 190 m (623').
Swing system
Swing unit: Powered by a hydraulic piston-type motor
driving spur gears through planetary reducers, the
swing system provides 360 rotation.
Swing brake: A spring-set, hydraulically released
multiple-disc brake is internally fitted in swing motor.
Swing lock: 4-position lock for transportation.
Upperworks
Engine
HINO J08E-UV, 6 cylinder, water-cooled diesel, direct
fuel injection with turbocharger, 213 kW (285 HP)
at 2100 high-idle RPM. Maximum torque 1017 Nm
(750 lbft) net at 1,600 rpm; Interim Tier 4/Stage IIIB
(Required for sale in the US/Canada/Europe; requires
"Ultra Low Sulfur Diesel")

HINO J08E-VM, 6 cylinder, water-cooled diesel,
direct fuel injection with turbocharger, 213 kW (285
HP) at 2100 high-idle RPM. Maximum torque 1017
Nm (750 lbft) net at 1,600 rpm; Tier 3 (Required for
sale outside the US/Canada/Europe)

One diesel fuel tank, 400 liters (105 gallons) capacity.
Two 12 volt 136 AH capacity batteries, 24 volt system
and 90 amp alternator.
All wiring harnesses and connectors are numbered for
easier servicing. Machine is equipped with individual
fused branch circuits.
Controls
Full-flow hydraulic control system for constant variable
pressure to front and rear drums, boom hoist brakes
and clutches. Controls respond instantly to the touch,
delivering smooth function operation.
Relief valve pressures:
Load hoist, boom hoist
and propel system . . . . . . . . . . . 31.9 MPa (4,630 psi)
Swing system . . . . . . . . . . . . . . . 27.5 MPa, (3,989psi)
Control system . . . . . . . . . . . . . . . 5.4 MPa (783 psi)


Hydraulic system
All four variable displacement piston-type pumps
are driven by a heavy-duty pump drive. One of these
pumps is used in the right propel circuit and hook hoist
circuit and can accommodate an optional third drum
circuit. Another is used in the left propel circuit and
hook hoist circuit. A third pump is used in the boom
hoist circuit. The fourth variable displacement pump is
used in the swing circuit. In addition, two gear pumps
are used in the control system and auxiliary equipment,
and two gear pumps serve the brake cooling system.
Manitowoc 12000-1
Specifications
5
Rotating bed turntable: Single-row ball bearing with
an integral internally cut swing gear.
Swing speed: 3.2 rpm

Boom support system
Single drum powered by a hydraulic axial piston motor
through a planetary reducer.
Brake: A spring-set, hydraulically released multiple-
disc brake is mounted on the boom hoist motor. An
external ratchet is fitted for locking the drum.
Drum: Single drum, grooved for 20 mm diameter wire
rope. Boom Hoist reeving is 10-part line.
Wire Rope Capacity:
Drum 155 m (508 ft) working length.
Line speed: Single line on the first drum layer
Hoisting: . . . . . . . . . . . . . . . . . . . 48m/min (157 ft/min)
Lowering: . . . . . . . . . . . . . . . . . . 48m/min (157 ft/min)

Gantry
Tis high folding type gantry is ftted with a sheave
frame for boom hoist reeving. It provides full up, full
down positions. Hydraulic lift is standard.
Counterweight
Upper weight (5 pieces): 76,280 lb (34,600 kg)
Carbody weight (2 pieces): 14,330 lb (6,500 kg)
Operators cab
Totally enclosed, full vision cab fitted with tinted
safety glass. A fully adjustable, highbacked seat with
arm rests permits operators to set their ideal working
position. Short handle control levers; electronic twist
grib hand throttle. Joystick controls are optional. An
air conditioner, a signal horn and windshield wiper are
standard features.
Controls
Full-flow hydraulic control system for constant variable
pressure to front and rear drums, boom hoist brakes
and clutches. Controls respond instantly to the touch,
delivering smooth function operation.
Safety device
New easy to read at a glance LMI and maintenance
display. Function lock lever, anti-two-block, boom over
hoist limit switch, boom angle indicator, signal horn,
boom hoist drum lock, front and rear drum lock, swing
lock, swing alarm (buzzer and lamps), boom backstops
and load moment indicator.
Lights: 2 - Front flood lights
1 - Cab inside light
Lowerworks

Carbody
The durable carbody features steel welded construction
with extendible axles.
Crawlers
Crawler assemblies can be hydraulically extended for
wide-track operation. Crawler belt tension adjusted
with hydraulic jack and maintained by shims between
idler block and frame.
Crawler drive
The independent hydraulic propel drive is built into
each crawler side frame. Each drive consists of a
hydraulic motor driving a propel sprocket through a
planetary gearbox. The hydraulic motor and gearbox
are built into the crawler side frame within the shoe
width. The track rollers are sealed for maintenance-free
operation.
Crawler brakes
Spring set, hydraulically released, multiple disc-type
parking brakes are built into each propel drive.
Steering mechanism
The hydraulic propel system provides both skid
steering (driving one track only) and counter-rotating
steering (driving each track in opposite direction) and
differential track speed.
Crawler shoes
914 mm (36") wide each crawler.
Travel speed
(High/Low) 1.4/1.0 km/h (0.87/0.62 mph)
Specifications
6
Attachments

Boom
Welded lattice construction using tubular, high-tensile
steel chords with pin connections between sections.
Boom tip is open throat construction. Two idler
sheaves and four point sheaves are standard.
Basic boom length 15,2 m (50') consists of the boom
butt section 7,62 m (25' 0") and boom top section
7,62 m (25' 0").
Optional boom inserts are available to provide
extension capabilities. They also have welded lattice
construction with tubular, high-tensile steel chords and
pin connections on each one of 3,0 m (10'), 6,1 m
(20'), 12,2 m (40') inserts.
Maximum total length of boom 70,1 m (230').
Fixed jib
The optional fixed jib employs welded lattice
construction with tubular, high-tensile steel chords
with pin connections between sections.
Basic jib length 9,14 m (30') consists of jib butt section
4,57 m (15') and jib top section 4,57 m (15').
Optional jib boom inserts of 3,0 m (10'), 6,1 m (20')
are available for extension capabilities up to 21,3 m (70').
Maximum total length of boom and jib 61,0 m (200')
+ 21,3 m (70') is 82,3 m(270').
Tools and accessories
A set of tools and accessories are furnished.
Optional equipment
Optional: Blocks and Hooks each with roller
bearing sheaves grooved for 26.0 mm diameter wire
rope, and roller bearing swivel with hook latch.
13,5 t ball hook, 450 kg, wedge socket for 26 mm
wire rope. (15 USt ball hook, 1,310 lb wedge
socket for 26 mm wire rope.)
35 t hook block, 700 kg with one 500 mm
Nominal O.D. roller bearing sheaves. (40 USt
hook block, 1,881 lb with one 24" Nominal O.D.
roller bearing sheaves.)
70 t hook block, 900 kg, with three 500 mm
Nominal O.D. roller bearing sheaves. (90 USt
hook block, 4,060 lb, with three 24" Nominal
O.D. roller bearing sheaves.)
110 t hook block, 1700 kg, with five 500 mm
Nominal O.D. roller bearing sheaves. (120 USt
hook block, 3,760 lb with five 24" Nominal O.D.
roller bearing sheaves.)
Optional: Detachable upper boom point with one
575 mm Nominal outer diameter roller bearing steel
sheave grooved for 26mm rope for liftcrane.
Machine inclination sensor.
Swing angle detection and angle limiter.
Hydraulic tagline.
External lamp for overload alarm.
Working weight
Approximately 99,900 kg (220,300 lb) including
upperworks and lowerworks, full upper counterweights,
full carbody counterweight and 15,2 m (50') basic boom.
Ground pressure
Approximately 93.9 kPa (13.6 psi) with basic boom
and no load.
Gradeability
With basic boom: 40%.
Manitowoc 12000-1
Outline dimensions
7
Outline dimensions
8
Option
Upperworks x 1
Length 15,78 m 51' 9"
Width 3,50 m 11' 8"
Height 3,50 m 11' 6"
Weight 57 520 kg 126,808 lb
Note: Weight includes base machine, crawler, gantry,
maximum hoist and whip lines on drums, boom butt,
full hydraulic fuid reservoir, and one third tank of fuel.
Upperworks x 1
Length 9,42 m 30' 11"
Width 3,50 m 11' 6"
Height 3,50 m 11' 6"
Weight 54 200 kg 119,808 lb
Note: Weight includes base machine, crawler, gantry,
maximum hoist and whip lines on drums, full
hydraulic fuid reservoir, and one third tank of fuel.
Upperworks without crawlers x 1
Length 15,78 m 51' 9"
Width 2,99 m 9' 10"
Height 3,05 m 10' 0"
Weight 33 660 kg 74,206 lb
Note: Weight includes base machine, gantry, maximum
hoist and whip lines on drums, full hydraulic fuid
reservoir, and one third tank of fuel.
Upperworks without crawlers x 1
Length 8,65 m 28' 5"
Width 2,99 m 9' 10"
Height 3,05 m 10' 0"
Weight 30 340 kg 66,887 lb
Note: Weight includes base machine, gantry, maximum
hoist and whip lines on drums, full hydraulic fuid
reservoir, and one third tank of fuel.
Crawlers x 2
Length 6,77 m 22' 2"
Width 0,90 m 2' 11"
Height 1,13 m 3' 9"
Weight 11 930 kg 26,301 lb
Self removal unit x 1
Length 1,59 m 5' 3"
Width 1,90 m 6' 3"
Height 0,98 m 3' 3"
Weight 870 kg 1,918 lb
L
H
L
H
L
H
L
H
L
H
L
W
H
Manitowoc 12000-1
Outline dimensions
9
Hydraulic jack (if removed) x 1
Length 1,48 m 4' 10"
Width 0,23 m 0' 9"
Height 0,97 m 3' 2"
Weight 320 kg 705 lb
Upper counterweight A x 1
Length 4,43 m 14' 6"
Width 1,19 m 3' 11"
Height 0,83 m 2' 9"
Weight 11 600 kg 25,573 lb
Upper counterweight B x 2
Length 1,45 m 4' 9"
Width 1,17 m 3' 10"
Height 0,88 m 2' 11"
Weight 5 750 kg 12,676 lb
Upper counterweight C x 2
Length 1,45 m 4' 9"
Width 1,17 m 3' 10"
Height 0,88 m 2' 11"
Weight 5 750 kg 12,676 lb
Carbody counterweight with oat x 1
Length 2,08 m 6' 10"
Width 1,26 m 4' 2"
Height 0,66 m 2' 2"
Weight 3 320 kg 7,319 lb
Carbody counterweight without oat x 1
Length 2,08 m 6' 10"
Width 0,82 m 2' 8"
Height 0,66 m 2' 2"
Weight 3 250 kg 7,165 lb
L
W
H
W
H
L
W
L
H
H
W
L
Option
L
H
W
L
H
W
Outline dimensions
10
L
H
L
H
L
H
L
H
L
H
L
H
Boom butt 7,6 m (25 ft) x 1
Length 7,79 m 25' 7"
Width 1,73 m 5' 8"
Height 2,06 m 6' 9"
Weight 2 235 kg 4,927 lb
Boom top 7,6 m (25 ft) x 1
Length 8,32 m 27' 4"
Width 1,68 m 5' 6"
Height 1,65 m 5' 5"
Weight 1 525 kg 3,360 lb
Boom insert 3,0 m (10 ft) x 1,2
Length 3,16 m 10' 4"
Width 1,68 m 5' 6"
Height 1,69 m 5' 7"
Weight 380 kg 840 lb
Boom insert 6,1 m (20 ft) x 1,2
Length 6,21 m 20' 5"
Width 1,68 m 5' 6"
Height 1,69 m 5' 7"
Weight 655 kg 1,445 lb
Boom insert 12,2 m (40 ft) x 1,2,3
Length 12,31 m 40' 4"
Width 1,68 m 5' 6"
Height 1,69 m 5' 7"
Weight 1 195 kg 2,635 lb
Note: Use of one A type insert with lug required for any
boom combinations that require a 12,2 m (40) insert.
Fixed jib butt x 1
Length 4,81 m 15' 9"
Width 0,80 m 2' 8"
Height 0,80 m 2' 8"
Weight 200 kg 440 lb
Option
Manitowoc 12000-1
Outline dimensions
11
L
H
L
H
L
H
L
H
Option
Fixed jib top x 1
Length 5,00 m 16' 5"
Width 0,80 m 2' 8"
Height 0,80 m 2' 8"
Weight 280 kg 620 lb
Fixed jib insert 3,0 m (10 ft) x 1,2
Length 3,11 m 10' 2"
Width 0,80 m 2' 8"
Height 0,80 m 2' 8"
Weight 100 kg 220 lb
Fixed jib insert 6,1 (20 ft) x 1,2
Length 6,16 m 20' 3"
Width 0,80 m 2' 8"
Height 0,80 m 2' 8"
Weight 180 kg 400 lb
Fixed jib strut x 1
Length 3,62 m 11' 11"
Width 0,84 m 2' 9"
Height 0,62 m 2' 1"
Weight 250 kg 550 lb
Performance data
12
Line pull
Rated line pull
kg (lb)
*Maximum line pull
kg (lb)
Front drum
11 400
(25,100)
21 200
(46,800)
Rear drum
11 400
(25,100)
21 200
(46,800)
Optional 3rd drum
11 400
(25,100)
21 200
(46,800)
* Maximum line pull is not based on wire rope strength.
Wire rope specications
Use

Specs Diameter
mm
Working
length
m (ft)
Breaking
strength
kg (lb)
Front
drum
IWRC
6 X Fi (29) C/O
26,0 260
(853)
54 431
(120,000)
Rear
drum
IWRC
6 X Fi (29) C/O
26,0 230
(754)
54 431
(120,000)
Boom hoist
drum
IWRC
6 X WS (31) C/O
20,0 155
(508)
33 430
(73,700)
Third drum
(optional)
IWRC
6 X Fi (29) C/O
26,0 190
(623)
54 431
(120,000)
Front and rear winch performance (optional: third winch)
Layer
Line speed
m/min (ft/min)
1 2 3 4 5 6
Single line pull
kg (lb)
0
(0)
120
(394)
129
(422)
137
(450)
146
(479)
155
(505)
163
(535)
2 268
(5,000)
118
(387)
126
(415)
135
(443)
143
(471)
152
(499)
160
(526)
4 536
(10,000)
108
(353)
108
(353)
108
(353)
108
(353)
108
(353)
108
(353)
6 804
(15,000)
72
(235)
72
(235)
72
(235)
72
(235)
72
(235)
72
(235)
9 072
(20,000)
52
(117)
52
(117)
52
(117)
52
(117)
52
(117)
52
(117)
11 340
(25,000)
43
(141)
43
(141)
43
(141)
43
(141)
43
(141)
43
(141)
13 608
(30,000)
36
(118)
36
(118)
36
(119)
37
(121)
37
(122)
37
(123)
15 876
(35,000)
31
(103)
32
(104)
32
(105)
32
(105)

18 144
(40,000)
28
(92)
28
(92)

NOTE: Line speeds and line pull based on single line.

Line pulls are not based on wire rope strength.
13
Load chart notes
Manitowoc 12000-1
1. Rated loads included in the charts are the
maximum allowable freely suspended loads at a
given boom length, boom angle and load radius,
and have been determined for the machine
standing level on frm supporting surface under
ideal operating conditions.Te user must limit or
de-rate rated loads to allow for adverse conditions
(such as soft or uneven ground, out-of-level
conditions, wind, side loads, pendulum action,
jerking or sudden stopping of loads, inexperience
of personnel, multiple machine lifts, and traveling
with a load).
2. Capacities do not exceed 75% of minimum
tipping loads. Capacities based on factors
other than machine stability such as structural
competence are shown by asterisk * in the charts
located in the operator's crane cab.
3. Te machine must be reeved and set-up as stated
in the operation manual and all the instruction
manuals. If these manuals are missing, obtain
replacements. Boom backstops are required for all
boom lengths. Gantry must be in the fully raised
position for all operations. Crawlers must be fully
extended and be locked in position. Te crane
must be leveled to within 1% on a frm supporting
surface.
4. Do not attempt to lift where no radius or load is
listed as crane may tip or collapse.
5. Attempting to lift more than rated loads may cause
machine to tip or collapse. Do not tip machine to
determine capacity.
6. Weight of hooks, hook blocks, slings and other
lifting devices are a part of the total load. Teir
total weight must be subtracted from the rated
load to obtain the weight that can be lifted.
7. When lifting over boom point with jib or upper
boom point installed, rated loads for the boom
must be deduted as shown below.
Jib length m
(ft)
Upper
boom point
9,1
(30)
12,2
(40)
15,2
(50)
18,3
(60)
21,3
(70)
Deduct kg
(lb)
318
(700)
1 100
(2,400)
1 500
(3,200)
2 000
(4,200)
2 400
(5,200)
2 900
(6,200)


8. Te total load that can be lifted by the fxed jib is
limited by rated jib loads. Te total load that can
be lifted with the upper boom point is limited by
rated upper boom point loads.
9. Boom lengths for fxed jib mounting are 27,4 m
(90 ft) to 61,0 m (200 ft).
10. An upper boom point cannot be used on a 70,1 m
(230 ft) boom length.
11. Te boom should be erected over the front of the
crawlers, not laterally.
12. Least stable position is over the side.
13. Maximum hoist load for number of reeving parts
of line for hoist rope.
Maximum load for main boom
No. of parts of line 1 2 3 4 5
Maximum loads kg
(lb)
11 300
(25,000)
22 600
(50,000)
33 900
(75,000)
45 200
(100,000)
56 500
(125,000)
No. of parts of line 6 7 8 9 10
Maximum loads kg
(lb)
67 800
(150,000)
79 100
(175,000)
90 400
(200,000)
101 700
(225,000)
110 000
(240,000)
Maximum load for xed jib
No. of parts of line 1
Maximum loads kg
(lb)
10 800
(24,000)
Maximum load for upper boom
point (on liftcrane boom)
No. of parts of line 1 2
Maximum loads kg
(lb)
11 300
(25,000)
22 600
(50,000)
14. Lifting capacities listed apply only to the machine
as originally manufactured for and supplied by
Manitowoc Cranes, Inc. Modifcations to this
machine or use of equipment other than that
specifed can reduce operating capacity.
15. Designed and rated to comply with ASME Code
B30.5.
Operation of this equipment in excess of rated loads or disregard of
instruction voids the warranty.
Boom combinations
14
Model 12000-1
Main boom
70,1 m (230 ft)
7,6 m (25 ft)
boom butt
12,2 m (40 ft)
boom insert
6,1 m (20 ft)
boom insert
3,0 m (10 ft)
boom insert
12,2 m (40 ft)
boom insert
12,2 m (40 ft)
boom insert
7,6 m (25 ft)
No. 12000-1
boom top
Model 12000-1
main boom
70,1 m (230 ft)
3,0 m (10 ft)
boom insert
6,1 m (20 ft)
boom insert
No. 12000-1 heavy-lift
boom combinations
Boom inserts
Boom
length
m (ft)
3,1 m
(10 ft)
6,1 m
(20 ft)
12,2 m
(40 ft)
15,2 (50)
18,3 (60) 1
21,3 (70) 2 1
24,4 (80) 1 1
27,4 (90) 2 1
30,5 (100) 1 2
33,5 (110) 2 2
36,6 (120) 1 1 1*
39,6 (130) 2 1 1*
42,7 (140) 1 2 1*
45,7 (150) 2 2 1*
48,8 (160) 1 1 2*
51,8 (170) 2 1 2*
54,9 (180) 1 2 2*
57,9 (190) 2 2 2*
61,0 (200) 1 1 3*
64,0 (210) 2 1 3*
67,0 (220) 1 2 3*
70,1 (230) 2 2 3*
* NOTE: One 40 ft (12,2 m) boom insert
with lug 40A is required for fxed jib. When
no jib is installed a 40 ft (12,2 m) boom
can be used instead of 40A.
Manitowoc 12000-1
Boom combinations
15
Model 12000-1
Fixed jib on main boom
82,3 m (270 ft)
4,6 m (15 ft)
jib top
4,6 m (15 ft)
jib butt
Model 12000-1
fixed jib
21,3 m (70 ft)
3,0 m (10 ft)
boom insert
12,2 m (40 ft)
boom insert
6,1 m (20 ft)
boom insert
12,2 m (40 ft)
boom insert
12,2 m (40 ft)
boom insert
7,6 m (25 ft)
boom top
6,1 m (20 ft)
jib insert
7,6 m (25 ft)
boom butt
Model 12000-1
main boom
61,0 m (200 ft)
6,1 m (20 ft)
jib insert
No. 12000-1 xed jib
combinations
Fixed jib
inserts
Fixed jib
length
m (ft)
3,1 m
(10ft)
6,1 m
(20ft)
9,1 (30)
12,2 (40) 1
15,2 (50) 1
18,3 (60) 1 1
21,3 (70) 2
Heavy-lift boom range diagram
16
Tailswing
, m
' "
, m
' "
, m
' "
Rotation
H
e
i
g
h
t

a
b
o
v
e

g
r
o
u
n
d


m

f
t

,
,
,
(!80) 54,9
(!60) 48,8
(!40) 42,Z
(!20) 36,6
(!00) 30,5
(80) 24,4
(60) !8,3
(!90) 5Z,9
(2!0) 64,0
(220) 6Z,0
(230) Z!,0
(240) Z3,!
(!Z0) 5!,8
(!50) 45,Z
(!30) 39,6
(!!0) 33,5
(90) 2Z,4
(Z0) 2!,3
(50) !5,2
Distance |rom centerline o| rotation m (|t)
48,8
(!60)
54,9
(!80)
6!,0
(200)
42,Z
(! 40)
36,6
(! 20)
30,5
(! 00)
24,4
(80)
! 8,3
(60)
! 2,2
(40)
30

40

50

60

Z0

82

3
9
,6
(! 3
0
)
4
2
,Z
(! 4
0
)
4
5
,Z
(! 5
0
)
4
8
,8
(! 6
0
)
3
6
,6
(! 2
0
)
3
3
,5
(!!
0
)
3
0
,5 (! 0
0
)
6!,0
(2
0
0
)
6
4
,0
(2! 0
)
6
Z,!
(2
2
0
)
Z0
,!
(2
3
0
)
5
Z,9
(! 9
0
)
5
4
,9
(! 8
0
)
5!,8
(! Z0
)
2
Z,4
(9
0
)
24
,4
(8
0
)
2
!,4
(Z0
)
!
8
,3
(6
0
)
!
5
,3
(5
0
)
No. 12000-1 main boom
Manitowoc 12000-1
Heavy-lift boom load charts
17
Meets ASME B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
Model 12000-1 liftcrane boom capacities - 12000-1 main boom
34 600 kg (76,280 lb) crane counterweight, 6 500 kg (14,330 lb) carbody counterweight crawler extended

360 Rating kg (lb) x 1 000
Boom
m (ft)
15,2
(50)
18,3
(60)
21,3
(70)
24,4
(80)
27,4
(90)
30,5
(100)
33,5
(110)
36,6
(120)
39,6
(130)
42,7
(140)
45,7
(150)
48,8
(160)
51,8
(170)
54,9
(180)
57,9
(190)
61,0
(200)
64,0
(210)
67,1
(220)
70,1
(230)
Radius
3,6
(12)
110,0
(240.0)
4,0
(14)
99,1
(206.0)

(204.0)
4,5
(16)
88,4
(177.0)
87,6
(177.0)
86,2
(177.0)
5,5
(18)
68,0
(150.0)
67,9
(150.0)
67,9
(150.0)
68,0
(150.0)
67,9
(150.0)
6,0
(20)
62,0
(135.0)
61,9
(135.0)
61,9
(135.0)
62,0
(135.0)
61,9
(135.0)
61,9
(135.0)
7,0
(24)
53,6
(111.9)
53,6
(111.7)
53,6
(111.7)
53,6
(111.5)
53,6
(111.5)
53,1
(111.3)
53,0
(111.3)
53,3
(111.1)

(100.0)
8,0
(28)
44,5
(89.5)
44,3
(89.2)
44,3
(89.0)
44,3
(88.8)
44,3
(88.8)
44,2
(88.6)
44,1
(88.4)
44,1
(88.4)
44,0
(88.1)
43,9
(87.9)

(87.7)
10,0
(34)
32,8
(68.3)
32,2
(68.1)
32,2
(67.9)
32,2
(67.4)
32,2
(67.4)
32,1
(67.2)
32,0
(67.0)
32,0
(67.0)
31,9
(66.7)
31,8
(66.5)
31,7
(66.3)
31,7
(66.3)
31,6
(66.1)
31,5
(65.9)
30,0
(65.4)
12,0
(40)
25,6
(55.1)
25,6
(54.6)
25,3
(54.4)
25,3
(54.2)
24,6
(54.0)
24,9
(53.7)
24,8
(53.5)
24,8
(53.5)
24,7
(53.3)
24,6
(53.1)
24,4
(52.6)
24,5
(52.9)
24,3
(52.4)
24,2
(52.2)
24,1
(52.0)
22,6
(50.0)
22,6
(50.0)
21,3
(46.7)
19,5
(42.7)
14,0
(45)

(47.1)
20,5
(46.7)
20,5
(46.5)
20,5
(46.2)
20,5
(46.0)
20,3
(45.8)
20,2
(45.6)
20,2
(45.6)
20,1
(45.4)
20,0
(45.1)
19,8
(44.7)
19,9
(44.9)
19,7
(44.5)
19,6
(44.3)
19,5
(44.0)
19,5
(44.0)
19,4
(43.8)
19,2
(43.4)
17,9
(40.1)
16,0
(55)
17,0
(36.1)
17,0
(35.9)
17,0
(35.4)
17,0
(35.4)
17,0
(35.0)
16,9
(34.8)
16,8
(34.8)
16,8
(34.6)
16,6
(34.3)
16,5
(33.9)
16,5
(33.9)
16,4
(33.7)
16,2
(33.2)
16,1
(33.0)
16,1
(33.0)
16,0
(32.8)
15,9
(32.6)
15,7
(32.1)
22,0
(75)
11,5
(23.5)
11,0
(23.1)
11,0
(22.9)
10,9
(22.7)
10,8
(22.4)
10,6
(22.2)
10,5
(21.8)
10,5
(21.8)
10,4
(21.6)
10,2
(21.1)
10,0
(20.9)
10,1
(20.9)
10,0
(20.7)
9,8
(20.2)
9,6
(20.0)
28,0
(95)
7,9
(16.5)
7,8
(16.3)
7,7
(16.0)
7,5
(15.6)
7,4
(15.4)
7,4
(15.4)
7,2
(14.9)
7,0
(14.7)
6,9
(14.3)
6,9
(14.3)
6,8
(14.1)
6,7
(13.8)
6,5
(13.4)
32,0
(105)
6,4
(14.1)
6,3
(13.8)
6,1
(13.4)
6,0
(13.2)
6,0
(13.2)
5,8
(12.7)
5,6
(12.3)
5,5
(12.1)
5,5
(12.1)
5,4
(11.9)
5,2
(11.4)
5,1
(11.2)
34,0
(115)
5,8
(12.1)
5,5
(11.6)
5,4
(11.2)
5,4
(11.2)
5,2
(11.0)
5,0
(10.5)
4,9
(10.1)
5,0
(10.3)
4,8
(9.9)
4,6
(9.7)
4,5
(9.2)
38,0
(125)
4,7
(10.3)
4,5
(9.9)
4,4
(9.7)
4,3
(9.4)
4,1
(9.0)
4,0
(8.8)
4,0
(8.8)
3,8
(8.3)
3,6
(7.9)
3,4
(7.4)
40,0
(135)
4,1
(8.5)
3,9
(8.1)
3,7
(7.7)
3,5
(7.2)
3,5
(7.2)
3,4
(6.8)
3,2
(6.6)
3,0
(6.1)
44,0
(145)
3,2
(7.0)
3,0
(6.6)
2,8
(6.1)
2,8
(6.1)
2,6
(5.7)
2,4
(5.2)
2,2
(4.8)
46,0
(155)
2,7
(5.7)
2,5
(5.2)
2,5
(5.0)
2,3
(4.6)
2,1
(4.4)
1,9
(3.9)
50,0
(165)
2,0
(4.4)
1,9
(4.1)
1,7
(3.7)
1,6
(3.5)
53,3
(175)
1,6
(3.5)
Meets ASME B30.5 Requirements Capacities do not exceet 75% of static tipping load.
NOTICE: Tis capacity chart is for reference only and must not be used for lifting purposes.
For complete chart, refer to www.cranelibrary.com.
Fixed jib range diagram
18
TAILSWING
, m
' "
, m
(Z' 3")
!,!0 m
(3' Z")
RTATlN
H
e
i
g
h
t

a
b
o
v
e

g
r
o
u
n
d


m

(
|
t
)
(40) !2,2
(200) 6!,0
(220) 6Z,!
(240) Z3,2
(260) Z9,2
(2Z0) 82,3
(280) 85,3
(!80) 54,9
(!60) 48,8
(!40) 42,Z
(!20) 36,6
(!00) 30,5
(80) 24,4
(60) !8,3
(!90) 5Z,9
(2!0) 64,0
(230) Z0,!
(250) Z6,2
(!Z0) 5!,8
(!50) 45,Z
(!30) 39,6
(!!0) 33,5
(90) 2Z,4
(Z0) 2!,3
(50) !5,2
Distance |rom centerline o| rotation m (|t)
48,8
(!60)
54,9
(!80)
60,!
(200)
42,Z
(!40)
36,6
(!20)
30,5
(!00)
24,4
(80)
!8,3
(60)
!2,2
(40)
(30) 9,!
6
!,0
(20
0
)
6
4
,0
(2!0
)
6
Z,!
(220
)
Z0
,!
(230
)
5Z,9
(!9
0
)
54
,9
(!8
0
)
5
!,8
(!Z0
)
4
8
,8
(!6
0
)
4
5
,Z
(!5
0
)
4
2
,Z (!4
0
)
39
,6
(!30
)
3
6
,6
(!2
0
)
Z0
0
80
0
60
0
50
0
40
0
Z3.2
(24
0
)
6
Z,!
(250
)
Z9
,2
(26
0
)
8
2,3
(2Z0
)
30
0
30
0
!0
0
2
!,3
(Z
0
)
!5
,2 (5
0
)
9
,!
(3
0
)
!8
.3 (6
0
)
!2
,2 (4
0
)
No. 12000-1 fixed jib on main boom
Manitowoc 12000-1
Fixed jib load charts
19
27,4
(90)
10,8
(24.0)
10,8
(24.0)
10.8
(24.0)
10.8
(24.0)
10,1
(21.9)
7,4
(16.1)
36,6
(120)
10,8
(24.0)
10,8
(24.0)
10,8
(24.0)
9,7
(21.1)
7,1
(15.3)
5,3
(11.6)
48,8
(160)
10,8
(24.0)
10,8
(24.0)
9,3
(20.1)
6,6
(14.2)
4,8
(10.4)
3,6
(7.8)
2,7
(5.8)
2,2
()
Boom
m (ft)
Radius
10,0
(30)
12,0
(40)
14,0
(50)
18,0
(60)
24,0
(80)
30,0
(100)
36,0
(120)
42,0
(140)
48,0
(160)
52,0
(175)
56,0
(185)
J
i
b

9
,
1

m

(
3
0

f
t
)
54,9
(180)

(24.0)
10,8
(24.0)
9,0
(19.8)
6,3
(13.6)
4,5
(9.8)
3,3
(7.1)
2,3
(4.9)
1,7
(3.6)
61,0
(200)

(24.0)
10,8
(24.0)
8,8
(19.0)
6,1
(13.1)
4,3
(9.3)
3,0
(6.5)
2,0
(4.2)
1,5
()
27,4
(90)

(21.0)
9,5
(21.0)
9,5
(21.0)
8,6
(18.9)






36,6
(120)

9,5
(21.0)
9,5
(21.0)
9,4
(20.8)
7,2
(15.6)








48,8
(160)

9,5
(21.0)
9,4
(20.8)
6,8
(14.7)
5,0
(10.7)
Boom
m (ft)
Radius
10,0
(30)
12,0
(40)
14,0
(50)
18,0
(60)
24,0
(80)
30,0
(100)
36,0
(120)
42,0
(140)
48,0
(160)
52,0
(175)
56,0
(185)
J
i
b


9
,
1

m

(
3
0

f
t
)
54,9
(180)

9,5
(21.0)
9,2
(20.2)
6,5
(14.1)
4,7
(10.2)
3,4
(7.4)
61,0
(200)

(21.0)
9,1
(19.9)
6,4
(13.7)
4,5
(9.7)
3,2
(7.0)
2,3
()
27,4
(90)
9,0
()
9,0
(20.0)
9,0
(20.0)
9,0
(20.0)
7,7
(16.8)
6,2
(13.6)
5,2
(11.5)




36,6
(120)
9,0
()
9,0
(20.0)
9,0
(20.0)
8,9
(19.5)
7,2
(15.7)
5,5
(11.9)
4,3
(9.3)




48,8
(160)
9,0
(20.0)
9,0
(20.0)
9,0
(20.0)
6,8
(14.7)
5,0
(10.8)
3,8
(8.2)
2,9
(6.2)
2,3
(4.9)
1,8
(4.1)
Boom
m (ft)
Radius
10,0
(30)
12,0
(40)
14,0
(50)
18,0
(60)
24,0
(80)
30,0
(100)
36,0
(120)
42,0
(140)
48,0
(160)
52,0
(175)
58,0
(185)
J
i
b

1
5
,
2

m

(
5
0

f
t
)
54,9
(180)
9,0
(20.0)
9,0
(20.0)
6,5
(14.1)
4,7
(10.2)
3,5
(7.5)
2,5
(5.4)
1,9
(4.0)
61,0
(200)
9,0
(20.0)
8,9
(19.7)
6,3
(13.6)
4,5
(9.8)
3,3
(7.1)
2,2
(4.7)
1,6
(3.3)

27,4
(90)
5,1
(11.4)
5,1
(11.2)

4,4
(9.8)



36,6
(120)
5,1
(11.4)
5,1
(11.2)

4,8
(10.6)
4,3
(9.6)




48,8
(160)
5,1
()
5,1
(11.4)
5,1
(11.4)

4,7
(10.4)
4,0
(8.6)


Boom
m (ft)
Radius
10,0
(30)
12,0
(40)
14,0
(50)
18,0
(60)
24,0
(80)
30,0
(100)
36,0
(120)
42,0
(140)
48,0
(160)
52,0
(175)
58,0
(185)
J
i
b

1
5
,
2

m

(
5
0

f
t
)
54,9
(180)
5,1
(11.4)
5,1
(11.4)

4,9
(10.8)
3,7
(8.1)
2,7
(5.9)


61,0
(200)
5,1
(11.4)
5,1
(11.4)

4,9
(10.6)
3,6
(7.7)
2,5
(5.3)
1,9
(3.8)

Model 12000-1 liftcrane fixed jib capacities - No. 12000-1 fixed jib on main boom
34 600 kg (76,280 lb) crane counterweight, 6 500 kg (14,330 lb) carbody counterweight crawler extended
360 Rating kg (lb) x 1 000
10 offset 30 offset
For complete chart, refer to www.cranelibrary.com.
Meets ASME B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
Fixed jib load charts
20
27,4
(90)
7,1
(15.7)
6,7
(14.8)

6,4
(13.9)

5,5
(11.5)

4,4
(9.4)

3,7
(7.9)
3,2
(7.1)
36,6
(120)
6,8
(15.1)

6,6
(14.4)

6,3
(13.3)

5,1
(10.9)

4,3
(9.2)

3,7
(8.2)
3,2
(6.8)




48,8
(160)
6,9
(15.4)
6,7
(14.8)
6,5
(14.3)
6,0
(12.7)
4,7
(9.7)
3,6
(7.9)
2,7
(5.6)
2,2
(4.8)
2,0
(4.0)
1,6
(3.3)
Boom
m (ft)
Radius

12,0
(45)
18,0
(60)
22,0
(75)
26,0
(90)
32,0
(110)
38,0
(130)
44,0
(145)
50,0
(170)
54,0
(180)
56,0
(190)
60,0
(200)
J
i
b

2
1
,
3

m

(
7
0

f
t
)
54,9
(180)
7,0
(15.6)
6,8
(15.0)
6,6
(14.4)
6,0
(12.3)
4,4
(9.1)
3,3
(7.2)
2,4
(4.7)
1,8
(3.9)
1,6
()
61,0
(200)
7,1
(15.7)
6,9
(15.1)
6,7
(14.6)
5,8
(11.9)
4,2
(8.6)
3,1
(6.8)
2,0
(4.1)
27,4
(90)

3,6
()
3,6
(8.1)

3,5
(7.6)

3,0
(6.5)
2,7
()




36,6
(120)

3,6
(8.1)
3,6
(8.1)
3,3
(7.0)
2,9
(6.3)

2,6
(5.9)
48,8
(160)

3,6
(8.1)
3,5
(7.6)
3,1
(6.9)
2,9
(6.4)

2,6
(5.9)
Boom
m (ft)
Radius

12,0
(45)
18,0
(60)
22,0
(75)
26,0
(90)
32,0
(110)
38,0
(130)
44,0
(145)
50,0
(170)
54,0
(180)
56,0
(190)
60,0
(200)
J
i
b

2
1
,
3

m

(
7
0

f
t
)
54,9
(180)

3,6
(8.1)
3,6
(7.8)
3,2
(7.1)
3,0
(6.6)
2,7
(5.5)
2,1
(4.5)
61,0
(200)

3,6
(8.1)
3,6
(8.0)
3,3
(7.3)
3,0
(6.8)
2,5
(4.9)
1,8
(3.9)
1,6
()
Model 12000-1 liftcrane fixed jib capacities - No. 12000-1 fixed jib on main boom
34 600 kg (76,280 lb) crane counterweight, 6 500 kg (14,330 lb) carbody counterweight crawler extended
360 Rating kg (lb) x 1 000
10 offset 30 offset
For complete chart, refer to www.cranelibrary.com.
Meets ASME B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
Clamshell
21 Manitowoc 12000-1
Clamshell Capacities
10 000 kg (22,050 lb) counterweight
(one upper counterweight, crawlers extended)
kg (lb) x 1 000
15,2
(50)

10,0
(25.0)

10,0
(25.0)
10,0
(25.0)
10,0
(25.0)
10,0
(23.1)





18,3
(60)






10,0
(25.0)
9,7
(25.0)
7,8
(22.9)
6,6
(19.8)
5,7
(12.5)


Boom
m (ft)
Radius
7,0
(22)
8,0
(26)
9,0
(30)
10,0
(34)
14,0
(45)
15,0
(50)
17,0
(55)
18,0
(60)
21,0
(70)
24,0
(80)
25,0
(85)
27,0
(90)
21,3
(70)







9,7
(25.0)
7,8
(22.7)
6,6
(19.6)
5,7
(17.2)
5,0
(15.2)
24,4
(80)




7,8
(22.5)
6,6
(19.4)
5,7
(17.0)
5,0
(15.0)
4,4
(11.9)





27,4
(90)







7,8
(21.6)
6,6
(19.2)
5,7
(16.8)
5,0
(14.8)
4,3
(11.7)

(9.5)


30,5
(100)









6,6
(18.5)
5,7
(16.5)
5,0
(14.6)
4,2
(11.5)

(9.3)

(8.4)

(7.7)
Boom:
Welded lattice construction using tubular, high-tensile steel
chords with pin connections between sections.
Basic boom length: 15,2 m (50 ft)
Max. boom length: 30,5 m (100 ft)
Limit of empty clamshell bucket weight: 2 100 kg (4,600 lb)
Base = 7,6 m (25 ft)
Insert: A = 3,05 m (10 ft)
B = 6,10 m (20 ft)
C = 12,2 m (40 ft)
Tip = 7,2 m (25 ft)
1. Figures represent maximum allowable capacity, and assume level ground and ideal working conditions.
2. Capacities are calculated at 66% of the minimum tipping loads.
3. Capacities are maximum recommended by PCSA Standard #4. Allowances must be made by the user for
such unfavorable conditions as a soft or uneven supporting surface, rapid cycle operations, or bucket suction.
4. Te combined weight of the bucket and load must not exceed these capacities.
5. Boom length for clamshell operation should not exceed 30,5 m (100 ft).
Boom component chart
Boom length m (ft) Boom arrangement
15,2 (50) Base-Tip
18,3 (60) Base-A-Tip
21,3 (70) Base-A-A-Tip, Base-B-Tip
24,4 (80) Base-A-B-Tip
27,4 (90) Base-A-A-B-Tip, Base-B-B-Tip, Base-C-Tip
30,5 (100) Base-A-B-B-Tip, Base-A-C-Tip
GUIDE SHEAVE
Manitowoc Crane Care
22
Crane Care is Manitowocs comprehensive service and
support program. It includes classroom and on-site
training, prompt parts availability, expert feld service,
technical support and documentation.
Tats commitment you wont fnd anywhere else.
Tats Crane Care.
Service training
Manitowoc specialists work with you in our training
centers and in the feld to make sure you know how
to get maximum performance, reliability and life from
your cranes.
Manitowoc Cranes Technical Training Centers provide
valuable multi-level training, which is available for all
models and attachments, in the following format:
Intro to Canbus and Canbus 1, 2, 3
Intro to EPIC and EPIC 1, 2, 3
Small Crawler 1
Canbus 1 and 2 assembly, operation and
maintenance
EPIC 1 and 2 assembly, operation and
maintenance
Refer to www.manitowoc.com for course descriptions.
Parts availability
Genuine Manitowoc replacement parts are accessible
through your distributor 24 hours a day, 7 days a week,
365 days a year.
Service interval kits
200 hour kit
1,000 hour kit
2,000 hour kit
Hydraulic test kit
U.S. standard tools kit
Field service
Factory-trained service experts are always ready to help
maintain your cranes peak performance.
For a worldwide listing of dealer locations, please
consult our website at: www.manitowoc.com
Technical support
Manitowocs dealer network and factory personnel
are available 24 hours a day, 7 days a week, 365 days
a year to answer your technical questions and more,
with the help of computerized programs that simplify
crane selection, lift planning, and ground-bearing
calculations.
For a worldwide listing of dealer locations, please
consult our website at: www.manitowoc.com
Technical documentation
Manitowoc has the industrys most extensive
documentation; available in major languages and
formats that include print, videotape, and DVD/CD.
Additional copies available through your Authorized
Manitowoc Distributor.

Crane operators manual
Crane parts manual
Crane capacity manual
Crane vendor manual
Crane service manual
Lufng jib operators/parts manual
Capacity chart manual - attachments
Available from your Authorized Manitowoc Cranes
Distributor, these videos are available in NTSC, PAL,
SECAM, and DVD formats.

Your Capacity Chart Video
Respect the Limits Video
Crane Safety Video
Boom Inspection/Repair Video
Crane Care Package
Manitowoc has assembled all of the available literature,
CDs and videos listed above plus several Manitowoc
premiums into one complete Crane Care Package,
which is supplied to the owner of each new crane.
Manitowoc 12000-1
Notes
23
2012 Manitowoc
0613-12000-1 PG-US-E www.manitowoccranes.com
Tis document is non-contractual. Constant improvement and engineering progress
make it necessary that we reserve the right to make specifcation, equipment, and price
changes without notice. Illustrations shown may include optional equipment and
accessories and may not include all standard equipment.
Regional ofces
China
Shanghai, China
Tel: +86 21 6457 0066
Fax: +86 21 6457 4955
Greater Asia-Pacic
Singapore
Tel: +65 6264 1188
Fax: +65 6862 4040
Europe, Middle East, Africa
Ecully, France
Tel: +33 (0)4 72 18 20 20
Fax: +33 (0)4 72 18 20 00
Americas
Manitowoc, Wisconsin, USA
Tel: +1 920 684 6621
Fax: +1 920 683 6277
Shady Grove, Pennsylvania, USA
Tel: +1 717 597 8121
Fax: +1 717 597 4062
Regional headquarters
Manitowoc Cranes
China
Beijing
Chengdu
Guangzhou
Xian
Greater Asia-Pacic
Australia
Brisbane
Melbourne
Sydney
India
Chennai
Delhi
Hyderabad
Pune
Korea
Seoul
Philippines
Makati City
Singapore
Factories
Brazil
Passo Fundo
China
TaiAn
Zhangjiagang
France
Charlieu
Moulins
Germany
Wilhelmshaven
India
Pune
Italy
Niella Tanaro
Portugal
Baltar
Fnzeres
Slovakia
Saris
USA
Manitowoc
Port Washington
Shady Grove
Americas
Brazil
Alphaville
Mexico
Monterrey
Chile
Santiago
Europe, Middle East,
Africa
France
Baudemont
Cergy
Decines
Germany
Langenfeld
Italy
Lainate
Netherlands
Breda
Poland
Warsaw
Portugal
Baltar
Russia
Moscow
South Africa
Johannesburg
U.A.E.
Dubai
U.K.
Buckingham