Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 60 views

    Arr

    Uploaded by

    boopelectra
    The document discusses standards and specifications for cable tray, metal frame supports, lightning protection, earthing, and structural bolts for an inlet separation and boosting facilities project in Algeria. It provides information on cable tray sizing, fire pump locations, material standards, earthing design, and responses to clarification questions on supply details, distribution boards, lighting, and more.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Arr

    Uploaded by

    boopelectra
    60 views3 pages
    The document discusses standards and specifications for cable tray, metal frame supports, lightning protection, earthing, and structural bolts for an inlet separation and boosting facilities project in Algeria. It provides information on cable tray sizing, fire pump locations, material standards, earthing design, and responses to clarification questions on supply details, distribution boards, lighting, and more.

    Original Description:

    h

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses standards and specifications for cable tray, metal frame supports, lightning protection, earthing, and structural bolts for an inlet separation and boosting facilities project in Algeria. It provides information on cable tray sizing, fire pump locations, material standards, earthing design, and responses to clarification questions on supply details, distribution boards, lighting, and more.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    60 views3 pages

    Arr

    Uploaded by

    boopelectra
    The document discusses standards and specifications for cable tray, metal frame supports, lightning protection, earthing, and structural bolts for an inlet separation and boosting facilities project in Algeria. It provides information on cable tray sizing, fire pump locations, material standards, earthing design, and responses to clarification questions on supply details, distribution boards, lighting, and more.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 3

    Cable Tray (Document No.

    J08423A-E-SP-15113,Section 8):
    Cable Tray system is designed as per IEC 61537
    Type of cable tray are Perforated, heavy duty, return flange type of cable
    tray
    Cable tray, ladders, tray covers, accessories shall be manufactured from
    hot-dipped galvanized (ISO 1461) mild steel. Tray thick is to be 1.5 (or) 2
    mm
    Metal frame supports & accessories(Document No.J08423A-E-SP-
    15113,Section 9):
    Metal frame supports & accessories shall be designed as per ISO 1461
    Channel combinations, cantilever arms & support brackets fabricated
    min. thickness of 2.5 mm mild steel. Steel is hot-dipped galvanized(ISO
    1461)
    Fittings & accessories fabricated min. thick of 6 mm mild steel
    Queries:
    We need control & power cable schedule for cable tray sizing
    We need firefighting pump pipe installation location drawing in
    basement of buildings?
    We dont have ISO 1461 std
    We dont have IEC 61537 std

    Lightning Protection(Document No.J08423A-E-SP-15114,Section 10):
    Lightning Protection shall be designed as per IEC 62305
    Air termination networks should consist of vertical or horizontal
    conductors
    Combination of both depending on the type of structure to be
    protected. No part of the roof (where applicable) should be more than
    5m from the nearest conductor
    For flat roofs a surface air termination network mesh not exceeding a
    20m x 10m grid shall be inserted
    For structures classed as hazardous the mesh shall be reduced to a 10m
    x 5m maximum grid
    Where structures consist of portions of various heights and have more
    than one roof air termination network the lower roof network should
    not only be joined to its own down conductors, but also joined to the
    down conductors of the taller portions of the structure

    Queries:
    Type of earthing conductor for panel & building earthing Drawing
    autocad ?

    Code of Practice for Earthing (Document No.J08423A-E-SP-15114,Section
    6):
    Earthing shall be designed as per BS 7430
    The earthing network shall consist of a main grid of bare copper
    conductors directly buried in the ground and connected to bored
    earthing wells with surface link boxes to permit measurement of earth
    resistance
    The secondary connections are made with green / yellow insulated
    copper flexible conductors of suitable cross-sectional area.
    The earthing of the emergency generators star point for the low voltage
    systems shall be carried out by connecting the star point to the earth
    grid creating a TN-S earthing system as defined in IEC 60364.

    Structural Bolts(Drawing No.J08423A-S-DW-18028,Section 3):
    Cable tray supports 16 mm(min. with single heavy hexagon nut as per
    ASTM A563M & single washer as per ASTM F436M.








    ALRAR-INLET SEPERATION AND BOOSTING FACILITIES-ALGERIA

    Queries:
    Please clarify the incoming supply details for the LDB, PDB & ELDB.
    Please give SLDs for main lighting distribution board, main power
    distribution board & main power emergency lighting distribution board.
    Clarify whether emergency lighting panel connected through DG.
    For Lighting calculation we are using Dailux software. We need to know
    the list of fitting vendors or default we shall take Philips fittings.
    Clarify whether we want to do the Cable tray sizing only for LV lighting
    cables & small power Cables. Are also to MV power & control cables.
    Please mention any standard earthing material sizes for building
    earthing & equipment earthing.
    Kindly provide Autocad drawings for all buildings.
    Kindly provide sample drawings for following.
    Lighting
    Earthing
    Lightning
    Cable tray
    Kindly provide price schedule for this project.
    Mention whether all drawings should be done in autocad or
    microstation.

    You might also like