SONICGUIDE

2012 Bogner Amplication

printed in U.S.A.
bogneramplication.com
Introduction


Thank you for choosing Bogner.
Since 1989, Reinhold Bogners
compelling, respected and sought-after
tube ampliers have graced the stages
and studios of elite players throughout
the world. Based on his legendary
Ecstasy and Uberschall ampliers,
the hand-built Ecstasy red, Ecstasy
blue and Uberschall pedals represent
the culmination of Reinholds sonic skill
and creative vision. Each pedal delivers
Bogners signature tone, plus a galaxy
of new and inspiring sounds.
red
blue
The Ecstasy blue pedal is based on the
Ecstasy ampliers blue channel,
acclaimed for its ability to deliver both
iconic, classic rock-n-roll crunch tones
and heavier rock rhythm and lead
sounds. Everyone knows that blue
delivers stunning Plexi tones, but when
the going gets rough, make no mistake -
blue can crush on demand.
Dubbed Armageddon in a Box, the
ferocious Uberschall pedal derives
its thunderous hi-gain tones from the
notoriously brutal Bogner Uberschall
amplier. While the Uberschall pedal,
like the amp, offers a signicant range
of classic lower and medium gains, its
true nature comes forth when deliver-
ing savage, face-melting, high-gain
aggression dont say we didnt
warn you!
The Ecstasy red pedal is based on the
Ecstasy ampliers extraordinary red
channel, famous for its incendiary
higher gain crunch and lead tones.
Using interactive controls to adjust
gain and EQ settings, the red pedal
delivers a wide range of expressive
tones from vintage overdrive to ripping
modern high gain. Ideal for aggressive
playing styles, the red pedal boasts the
outrageous heavy tones that get Bogner
amps into the backlines of rocks most
notable players.
on footswitch:
engages and true bypasses the effect.
boost footswitch:
engages adjustable volume boost and a
preset amount of gain boost. The boost
function only works when the pedal is
turned ON, allowing you to pre-arm it,
so that when the effect is turned ON,
the boost is already engaged.
boost volume:
adjusts the volume level of the boost. The
knob illuminates when the boost switch
is engaged.
controls:
adjustable volume, treble, middle, bass
and gain.
Guide: The middle knob is very
responsive and ranges from extremely
scooped midrange to thick fully voiced
and focused vintage-style tones. Similar
to the Presence knob on the Uberschall
amplier, this control increases the clarity
and cut when turned up.
Guide: Turn the bass knob to the lowest
setting before engaging the pedal and
then increase the bass to your desired
setting. The bass eq response is capable
of compressing some ampliers inputs. If
this occurs, lower the bass controls setting
and rest assured the pedal itself is not
-compressing.
Remote Jack:
The remote jack provides
control of the ON/OFF and
Boost functions via a remote
switching unit. TRS jack
wiring: tip = boost function,
ring = on/off bypass function,
momentary action.
Power:
9 volt DC negative tip
power connector or internal
9v battery. Unit is designed
for 9 volt DC power supply
only.
Low Battery Indicator:
When the battery voltage
drops below a usable
threshold, all LEDs will
start blinking and soon after,
the pedal will automatically
switch to bypass mode.
Immediately replace the
battery when this blinking
occurs. This low battery
voltage indicator utilizes a
digital circuit but carries no
audio signal. Bogner pedals
utilize a 100% pure analog
circuit for all audio signals.
on footswitch:
engages and true bypasses the effect.
boost footswitch:
engages the boost function only when
the pedal is turned ON. The boost can be
pre-armed so that when the effect is turned
ON the boost is already engaged.
boost volume:
adjusts the volume level of the boost. The
knob illuminates when the boost switch is
engaged.
boost gain:
adjusts the gain level of the boost. The knob
illuminates when the boost switch is engaged.
Guide: a scratching sound is normal when
adjusting this knob, since this circuit features
an adjustable bias setting.
controls:
adjustable volume, treble, middle, bass and
gain.
Variac On/Off
switch: adds a dropped voltage dy-
namic compression to the feel and sound.
mode switch:
tight offers higher gain and a focused
low - end with increased midrange and
highs
mellow offers the lowest gain and a
darker overall tone.
full offers a full spectrum gain boost with
an open, less focused low end.
pre eq switch:
b1 offers a high frequency boost that adds
detail and openness to the sound.
n offers a neutral tone that is rounder with
less attack.
b2 offers a boosted midrange and hi
frequency.
Guide: at higher gain settings the b1 and
b2 settings have less effect on the tone.
structure switch:
101 offers good vintage tones with a
wider bass and treble response and less
midrange.
100 offers a more focused tone with
less highs and bass but with a detailed
and rich midrange.
20th Anniversary offers a modern
sound with a boosted mid and high
frequency.
red

Remote Jack:
The remote jack provides
control of the ON/OFF and
Boost functions via a remote
switching unit. TRS jack
wiring: tip = boost function,
ring = on/off bypass function,
momentary action.
Power:
9 volt DC negative tip
power connector or internal
9v battery. Unit is designed
for 9 volt DC power supply
only.
Low Battery Indicator:
When the battery voltage
drops below a usable
threshold, all LEDs will
start blinking and soon after,
the pedal will automatically
switch to bypass mode.
Immediately replace the
battery when this blinking
occurs. This low battery
voltage indicator utilizes a
digital circuit but carries no
audio signal. Bogner pedals
utilize a 100% pure analog
circuit for all audio signals.

on footswitch:
engages and true bypasses the effect.
boost footswitch:
engages the boost function only when the
pedal is turned ON. The boost can be pre-armed
so that when the effect is turned ON the boost
is already engaged.
boost volume:
adjusts the volume level of the boost. The
knob illuminates when the boost switch is
engaged.
boost gain:
adjusts the gain level of the boost. The knob
illuminates when the boost switch is engaged.
Guide: a scratching sound is normal when
adjusting this knob, since this circuit features
an adjustable bias setting.
controls:
adjustable volume, treble, middle, bass and
gain.
variac on/off
switch: adds a dropped voltage dynamic
compression to the feel and sound
mode switch:
plexi is the lower gain setting, ideal for
clean and semi clean boost.
blue offers more gain, ideal for semi clean
and crunch tones.
pre eq switch:
b1 offers a high frequency boost that adds
detail and openness to the sound.
n offers a neutral tone that is rounder with
less attack.
b2 offers a boosted midrange and hi
frequency.
Guide: at higher gain settings the b1 and
b2 settings have less effect on the tone.
structure switch:
101 offers good vintage tones with a wider
bass and treble response and less midrange.
100 offers a more focused tone with less
highs and bass but with a detailed and rich
midrange.
20th Anniversary offers a modern
sound with a boosted mid and high
frequency.
blue

Remote Jack:
The remote jack provides
control of the ON/OFF and
Boost functions via a remote
switching unit. TRS jack
wiring: tip = boost function,
ring = on/off bypass function,
momentary action.
Power:
9 volt DC negative tip
power connector or internal
9v battery. Unit is designed
for 9 volt DC power supply
only.
Low Battery Indicator:
When the battery voltage
drops below a usable
threshold, all LEDs will
start blinking and soon after,
the pedal will automatically
switch to bypass mode.
Immediately replace the
battery when this blinking
occurs. This low battery
voltage indicator utilizes a
digital circuit but carries no
audio signal. Bogner pedals
utilize a 100% pure analog
circuit for all audio signals.

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is con
nected.
- Consult the dealer or an experienced radio/ TV
technician for help.
Changes or modications not expressly approved by
the party responsible for compliance could void the
users authority to operate the equipment.
BOGNER PEDALS LIMITED WARRANTY
Bogner offers a three (3) year warranty to the original
purchaser that this Bogner product will be free from
defects in material and workmanship. A dated sales
receipt will establish coverage under this warranty.
This warranty does not cover service or parts to
repair damage caused by accident, neglect, normal &
wear, disaster, misuse, abuse, negligence, inadequate
packing or shipping procedures and service, repair
or modications to the product which have not been
authorized or approved by Bogner. If this product is
defective in materials or workmanship as warranted
above, your sole remedy shall be repair or replace-
ment as provided below.
RETURN PROCEDURES
In the unlikely event that a defect should occur, fol-
low the procedure outlined below. Defective products
must be shipped, together with a dated sales receipt,
freight pre-paid and insured directly to Bogner. A
Return Authorization Number must be obtained from
our Customer Service Department prior to shipping
the product. Products must be shipped in their
original packaging or its equivalent; in any case, the
risk of loss or damage in transit is to be borne by the
purchaser. The Return Authorization Number must
appear in large print directly below the shipping
address. Always include a brief description of the
defect, along with your correct return address and
telephone number.
When emailing or calling to inquire about a returned
product, always refer to the Return Authorization
Number. If Bogner determines that the unit was
defective in materials or workmanship at any time
during the warranty period, Bogner has the option
of repairing or replacing the product at no additional
charge, except as set forth below. All replaced parts
become a property of Bogner. Products replaced or
repaired under this warranty will be returned via
ground shipping within the United States-freight
prepaid. Bogner is not responsible for costs associ-
ated with expedited shipping, either to Bogner or the
return of the product to the customer.
INCIDENTAL OR CONSEQUENTIAL DAMAGE
In no event is Bogner liable for any incidental or
consequential damages arising out of the use or
inability to use of any Bogner product, even if Bogner
or a Bogner dealer has been advised of the possibility
of such damages, or any other claim by any other
party. Some states do not allow the exclusion or
limitation of consequential damages, so the above
limitation and exclusion may not apply to you. This
warranty gives you specic legal rights and you may
also have other rights which may vary from state
to state.
FOR YOUR PROTECTION
Please complete the online warranty registration
within (30) ten days of the date of purchase so that
we may contact you directly in the event a safety
notication issued in accordance with the 1972
Consumer Product Safety Act.
CUSTOMER SUPPORT
Our dedicated staff is ready to assist
you with any warranty or product
related questions. Please email
info@bogneramplication.com or call
818-765-8929 (9:00AM to 4:00PM
Pacic Standard Time).
WARRANTY