Limits

Limits: Graphical Solutions

Graphical Limits
Let be a function defined on the interval [-6,11] whose graph is given as:

The limits are defined as the value that the function approaches as it goes to an x value. Using this
definition, it is possible to find the value of the limits given a graph. A few examples are below:

In general, you can see that these limits are equal to the value of the function. This is true if the function
is continuous.
Continuity
Continuity of a graph is loosely defined as the ability to draw a graph without having to lift your pencil.
To better understand this, see the graph below:

Lets investigate at the flowing points:

Discontinuous at this point
The value is not defined at -3
Removable discontinuity

Discontinuous at this point
The limit of the left is not equal
to the limit from the right
Jump discontinuity

Discontinuous at this point
The limit from the left is equal to
the right, but is not equal to the
value of the function
Removable discontinuity

Continuous at this point
The limit from the left is equal to
the limit from the right and equal
to the value of the function

Continuous at this point
The limit from the left is equal to
the limit from the right and equal
to the value of the function

Discontinuous at this point
The value of the limit is equal to
negative infinity and therefore
not defined
Infinite discontinuity
2

One-Sided Limits: General Definition
One-sided limits are differentiated as right-hand limits (when the limit approaches from the right) and
left-hand limits (when the limit approaches from the left) whereas ordinary limits are sometimes
referred to as two-sided limits. Right-hand limits approach the specified point from positive infinity. Left-
hand limits approach this point from negative infinity.
The right-handed limit:

The left-handed limit:

A. Now you try some!

Determine if the following limits exists:

A More Formal Definition of Continuity
From this information, a more formal definition can be found. Continuity, at a point a, is defined
when the limit of the function from the left equals the limit from the right and this value is also
equal to the value of the function. Using notation, for all points a where

,
the function is said to be continuous.
-7 -4
-4
4
4 7
3

Summary: When does a limit not exist?
A general limit does not exist if the left-and right-hand limits arent equal (resulting in a
discontinuity in the function).
A general limit does not exist wherever a function increases or decreases infinitely (without
bound) as it approaches a given x-value.
A general limit does not exist in the cases of infinite oscillation when approaching a fixed point.


Limits: Numeric Solutions
Now that you know how to solve a limit graphically, you may be asking yourself: Thats great, but what
about when there isnt a graph in the problem? That is a good question, and that is what this next
section is about. There are a many better (and more accurate) ways to find the value of the limit than
graphing or plugging in numbers that get closer and closer to the value of interest. These solution
methods fall under three categories: substitution, factoring, and the conjugate method. But first things
first, lets discuss some of the general rules for limits.

Limit Rules
Here are some of the general limit rules (with

and

):
1. Sum Rule: The limit of the sum of two functions is the sum of their limits

( )

2. Difference Rule: The limit of the difference of two functions is the difference of their limits

( )

3. Product Rule: The limit of a product of two functions is the product of their limits

( )

4. Constant Multiple Rule: The limits of a constant times a function is the constant times the limit
of the function

( )

5. Quotient Rule: The limit of a quotient of two functions is the quotient of their limits, provided
the limit of the denominator is not zero

Limit Rule Examples Find the following limits using the above limit rules:
1.

2.

4

3.

B. Now you try some!
1.

2.

3.

Limits of Rational Functions: Substitution Method
A rational function is a function that can be written as the ratio of two algebraic expressions. If a
function is considered rational and the denominator is not zero, the limit can be found by substitution.
This can be seen in the example below (which is similar to the example #3 above, but now done in one
quick, convenient step):

This can be defined more formally as: If and are algebraic expressions and , then:

C. Now you try some!
1.

2.

Factoring Method
Consider the function

. How would you find the limit of as approaches -3? If you try to
use substitution to find the limit, world-ending paradoxes ensue:

But fear not, this answer just tells us that we must use a different method to find the limit, because the
function likely has a hole at the given x value. Therefore, the factoring method can be tried. To start
this method, the numerator and denominator must be factored (in this case the denominator is
factored already).

The factor can be canceled to get the much simpler limit expression of

that can
easily be evaluated via substitution:

5

Therefore, the result of the limit can be found, with the understanding that there is a hole in the graph
at . Hence,

.

D. Now you try some!
a)

b)

Conjugate Method
The conjugate of a binomial expression (i.e. an expression with two terms, you can tell this because of
the Latin root bi- meaning two) is the same expression with opposite middle signs. For example, the
conjugate of is . This is really useful if you have a radical in your limit. This is because
the product of two conjugates containing radicals will, itself, contain no radical expressions. See below:
( )( )

You should use the conjugate method whenever you have a limit problem containing radicals for which
substitution does not work.
Example:
Evaluate

First try the substitution method:

Well, another hole in the universe, or at least the graph. Indicating that youll need another
method to find the limit since the function probably has a hole at . To start, multiply both
the numerator and denominator by the conjugate of the radical expression ( ):

( )
( )

( )

( )


6

Cancel the factor in the numerator and denominator.

( )

( )

E. Now you try some!
a)

b)

Example 1: Testing the Definition
Show:

We have to find a suitable so that if and x is within distance , that is if:
| |
Then is within distance of that is
| |
| |
| |
| |
| |

Thus, we can take

due to the fact that | | , then:

| |
| |

| |

Formal Definition: Limits
Limits are more formally defined as

L is the limit of f(x) as x approaches a if for every number , there is a corresponding number
such that for all x. Using notation we write

IFF | | | |

From the formal definition, right-handed limit can be defined as:
And written as:

Whereas the left-handed limit can be defined as:
And written as:
7

So, if | | | | | | (

)
therefore, | |

| | and

.


Limits: Advanced Topics
Previously, when we found that the result of a limit doing straight substitution yielded

we used
factoring or conjugation to be able to solve the problem. What happens when neither of those methods
prove useful? You become very grateful for the 17th-century French mathematician Guillaume de
LHpital. LHpital was the man that derived a method of solving these types of equations, known as
indeterminate forms. This method, known as LHpitals Rule, is formally defined below.



Example 1: indeterminate form of

Find the limit

Using LHpitals Rule:

Example 2: indeterminate form of

Find the limit

Using LHpitals Rule:

Using LHpitals Rule again:

Formal Definition: LHpitals Rule
If the limit

results in one of the following forms:

And

exits and , then:

8

Example 3: indeterminate form of
Find the limit

)
Using LHpitals Rule:

Example 4: indeterminate form of

Find the limit

Let

. Then

Using LHpitals Rule:

Therefore

Example 5: indeterminate form of
Find the limit

Using LHpitals Rule:

F. Now you try some!
1.

2.

3.

4.

5.

6. Why does the

not equal

?

Note the trick that is
needed here what
happens if you use
LHpitals Rule without
making this initial change?
9

7. Early in their presentation of limits, most teachers present the following two limit facts as
special cases:

and

= 0. Verify each by using LHpitals

Rule.



Limits to Infinity (Horizontal Asymptotes)

What happens to a function as it goes further and further out to the left and right? Well, that depends
on the function. But half of the answer can be discovered by allowing the independent variable to take
on increasingly large, positive values and keeping an eye on the output (the graph) - this investigates
what is happening as we go further and further to the right. The other half is discovered by allowing the
independent variable to take on increasingly large, negative values and, again, keeping an eye on the
output this investigates what is happening as we go further and further to the left.

Here are some basic facts and some generalizations that will be sufficient to evaluate most limits to
infinity.

Consider the function as an algebraic fraction, and consider the ratio of the leading terms. Let the
algebraic expression in the numerator be expressed as n(x) and the algebraic expression found in the
denominator be expressed as d(x), then
If the degree of the numerators is lower than the degree of the denominator, then

. In general, whenever the denominator grows faster than the numerator, the
limit will go to zero. Thus, in these cases, as the graph extends far to both the left and the right,
the output (i.e., the graph) gets closer and closer to zero.

Here is a list of functions in order of their rate of growth quickest to slowest:

, , 3, 2, 1

Examples:
a.

b.

If the degree of the numerator is higher than the degree of the denominator, then

. In general, whenever the numerator grows faster than the

denominator, the limit will go to positive or negative infinity. Thus, in these cases, as the graph
extends far to both the left and the right, the output (i.e., the graph) increases or decreases
without bound. In these cases, each side needs to be considered separately.
10


Examples:
a.

whereas

b.

[Note that

is meaningless since x! is not defined for negative values.]
c.

= + (Note that

as well [why?])

If the degrees are equal, then

is equal to the leading coefficient of n(x) over the

leading coefficient of d(x).

Examples:
a.

b.

G. Now you try some!
1.

2.

3.

4.

5.

11

Solutions to Now You Try Some!

A.

DNE (Does
not exist)

B.
1. 2c+5
2. -8
3. 1/5

C.
1. 5/2
2. 5/8

D.
1. 13
2. 3

E.
1. 4
2. 1/6

F.
1. 3/4
2. 3/7
3. (gets larger and larger without bound; technically this limit DNE)
4. DNE cannot take the logarithm of negative values
5. 1
6. Upon substituting -1 into the numerator and denominator, we do not get one of the
indeterminate forms; therefore we cannot use LHpitals Rule. More advanced
methods need to be used.

G.
1. 2/13
2. 0
3. 0
4. +
5. +