KBII

Anchoring Systems
4.3.3
Kwik Bolt II Expansion Anchor (KB II)
4.3.3.1 Product Description
Nut
Washer
Collar
Wedge Dimple
The Kwik Bolt II is a stud type expansion anchor with a single piece wedge
that performs as three independent wedges if necessary to provide consistent
performance in a wide variety of medium-duty applications. Applicable base
materials include concrete, lightweight concrete and grout filled block.
Impact Section
(Dog Point)
Anchor Body
Wedges
Expansion Cone
Product Features
Impact section (Dog Point) prevents thread damage during installation

Independent 3-piece wedge with dimples help prevent anchor from
spinning during installation
Length identification code facilitates quality control & inspection
after installation
Anchor size is same as drill bit size for easy installation
Comprehensive performance testing to provide high & consistent
performance in concrete, lightweight concrete & grout filled block
base materials
Mechanical expansion allows immediate load application

Can be installed in bottomless hole, which allows the anchor to be
driven flush with the surface after use. Eliminates cutting bolt heads.
Can be installed through the fixture, improving productivity
Comprehensive product offering includes many head styles, sizes,
carbon steel and stainless steel materials for a variety of applications
Guide Specifications
Anchor:
Expansion anchor shall be wedge type with a single piece three section wedge and zinc plated in accordance with ASTM B633.
Anchors must meet the description of Federal Specification A-A 1923A, Type 4. Anchor will bear a length identification code that is
visible after installation. Anchors shall be Kwik Bolt II as manufactured by Hilti, Inc., Tulsa, OK.
Installation:
Drill hole with a Hilti carbide tipped TE Bit or matched tolerance diamond core bit. Remove dust from the hole with oil free compressed
air. Drive anchor into the hole so that at least six threads are below the top of the fixture. Tighten to the recommended installation torque.
Listings/Approvals
Underwriters Laboratory No. 203 Pipe Hangers (3/8"-3/4" diameters)

International Conference of Building Officials (ICBO ES): Evaluation Report No. 4627, KB II
International Conference of Building Officials (ICBO ES): Evaluation Report No. 5224, HCKB
Southern Building Code Congress (SBCCI): Report No. 9930
City of Los Angeles (COLA): Research Report No. 25226
Factory Mutual (FM) KB II 3/8" x 2 1/4" w/Rod Coupler
Metro-Dade County Approval # 01-1003.03
4.3.3.2 Material Specifications

Carbon Steel KB II studs conform to ASTM A510 with chemical composition of AISI 1038 except
all countersunk KB II and KB 3/4" x 12", KB II 1" x 6", KB II 1" x 9" and KB II 1" x 12" which conform to
ASTM A108 with chemical composition of AISI 11L41
Wedges are manufactured from AISI 1010 carbon steel, except KB II 3/4" x 12", KB II 1" x 6",
KB II 1" x 9" and KB II 1" x 12" wedges which conform to chemical composition of AISI 304
Nuts are carbon steel conforming to ASTM A563 Grade A and meet dimensional requirements
of ANSI B18.2.2
Washers are carbon steel conforming to SAE 1005-1033 and meet dimensional requirements
of ANSI 18.22.1 Type A Plain
All carbon steel parts are zinc plated in accordance with ASTM B633, Type III Fe/Zn 5
Stainless Steel KB II studs conform to ASTM A276 or ASTM A493 with chemical composition of
either AISI 304 or 316 1/4" thru 9/16"
over 9/16"
Stainless steel wedges are of equivalent grade as bolts.
Nuts are stainless steel conforming to ASTM F594 with chemical composition of either AISI 304 or 316
and meeting dimensional requirements of ANSI B18.2.2 to conform with stud material
Washers are AISI 304 or 316 stainless steel conforming to ASTM A240 to conform with stud material
Note: Special Order Kwik Bolt II, nuts and washers may vary from standard materials.
154
MECHANICAL PROPERTIES
fy
min. fu
ksi (MPa)
ksi (MPa)
41 (282)
75 (517)
75 (517)
90 (620)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
76 (524)
64 (441)
90 (620)
76 (524)
US: 1-800-879-8000 / www.us.hilti.com Hilti Product Technical Guide 2002 Canada: 1-800-363-4458 / www.ca.hilti.com
Anchoring Systems
Kwik Bolt II Expansion Anchor
4.3.3
4.3.3.3 Technical Data

Kwik Bolt II Specification Table
Bolt Size
Details
dbit: nominal bit diameter1
/4
/8
in.
(mm)
/4
/8
1
(25.4)
(15.9)
(12.7)
/8
/2
/4
(19.1)
(9.5)
in.
/8
/2
(6.4)
/4
hmin / hnom: minimum/standard

depth of embedment
in.
(mm)
11/8
(29)
2
(51)
15/8
(41)
21/2
(64)
21/4
(57)
31/2
(89)
23/4
(70)
4
(102)
31/4
(83)
43/4
(121)
41/2
(114)
6
(152)
h1: minimum/standard
hole depth
in.
(mm)
13/8
(35)
21/4
(57)
2
(51)
27/8
(73)
23/4
(70)
4
(102)
33/8
(86)
45/8
(118)
4
(102)
51/2
(140)
51/2
(140)
7
(178)
: anchor length min./max.

other length available
in.
(mm)
13/4
(44)
41/2
(114)
21/4
(57)
7
(178)
23/4
(70)
7
(178)
33/4
(95)
10
(254)
41/4
(108)
12
(305)
6
(152)
12
(305)
th: thread length/

extra thread length
in.
(mm)
in.
(mm)
/8 / 11/8
4
(22/28) (102)
11/4
(32)
11/2
(38)
31/2 / 41/2
(89/114)
11/2
(38)
31/2 / 5
(89/127)
21/4
(57)
41/2
(114)
dh: wedge clearance

hole in plate
Tinst:
Recommended
Installation
Torque 2
Guide
Values
ft lb
(Nm)
Stainless hmin
Steel
hnom
Carbon hmin
Steel
hnom
Lightweight Carbon hmin
Concrete
Steel
hnom
Grout
Carbon hmin
Filled Block
Steel
hnom
Normal
weight
Concrete
/4
(19)
3
(76)
5
/16
(7.9)
4
7
4
7
4
4
4
4
(5.4)
(9.5)
(5.4)
(9.5)
(5.4)
(5.4)
(5.4)
(5.4)
h: min. base material thickness
/16
(11.1)
20
30
20
25
15
20
15
20
(27.0)
(40.5)
(27.0)
(33.8)
(20.3)
(27.0)
(20.3)
(27.0)
/4
(76)
9
/16
(14.3)
40
75
40
65
25
30
25
30
(54.1)
( 101)
(54.1)
(87.8)
(33.8)
(40.5)
(33.8)
(40.5)
11
/16
(17.5)
85
110
85
110
65
75
65
75
( 115)
( 149)
( 115)
( 149)
(87.8)
( 101)
(87.8)
( 101)
13
/16
(20.6)
150
200
150
235
135
150
120
130
(203)
(270)
(203)
(318)
(182)
(203)
(162)
(176)
11/8
(28.6)
235
450
250
450
(318)
(608)
(338)
(608)
3" (76 mm) or 1.3 hef , whichever number is greater
1. Hilti matched tolerance carbide-tipped drill bit (see section 7.4.1) or matched tolerance HILTI DD-B or DD-C diamond core bits (available in diameters from 1/2" to 1").
2. Do not apply any type of lubricant to threads prior to torquing anchor.
Combined Shear and Tension Loading

Nd
5/3
(N )
rec
Vd
5/3
(V )
1.0 (Ref. Section 4.1.2.7)
rec
155
Anchoring Systems
4.3.3
Carbon Steel Kwik Bolt II Allowable Loads in Concrete

Anchor
Diameter
in. (mm)
/4
(6.4)
/8
(9.5)
/2
(12.7)
/8
(15.9)
/4
(19.1)
6000 psi (41.4 MPa)
Tension
lb (kN)
Shear
lb (kN)
Tension
lb (kN)
Shear
lb (kN)
Tension
lb (kN)
Shear
lb (kN)
11/8
(29)
270
(1.2)
430
(1.9)
330
(1.5)
430
(1.9)
380
(1.7)
430
(1.9)
470
(2.1)
430
(1.9)
22
(51)
560
(2.5)
3 /4
(95)
670
(3.0)
530
(2.4)
670
(3.0)
530
(2.4)
15/8
(41)
530
(2.4)
1100
(4.9)
850
(3.8)
1100
(4.9)
21/2 1
(64)
1200
(5.3)
41/4 1
(108)
1330
(5.9)
1470
(6.5)
1550
(6.9)
1470
(6.5)
21/4
(57)
1170
(5.2)
1970
(8.8)
1730
(7.7)
1970
(8.8)
31/2 2
(89)
1870
(8.3)
2450
(10.9)
2800
(12.5)
2450
(10.9)
3070
(13.7)
2670
(11.9)
3070
(13.7)
3840
(17.1)
4190
(18.6)
3840
(17.1)
4140
(18.4)
3200
(14.2)
4140
(18.4)
6
(152)
2080
(9.3)
2 3/4
(70)
1600
(7.1)
42
(102)
2400
(10.7)
72
(178)
3200
(14.2)
31/4
(83)
1970
(8.8)
43/4 2
(121)
2930
(13.0)
(25.4)
4000 psi (27.6 MPa)
Shear
lb (kN)
3000 psi (20.7 MPa)
Tension
lb (kN)
2000 psi (13.8 MPa)
Embedment
Depth
in. (mm)
8
(203)
4000
(17.8)
41/2
(114)
3330
(14.8)
6
(152)
4930
(21.9)
9
(229)
6670
(29.7)
530
(2.4)
990
(4.4)
1470
(6.5)
1940
(8.6)
2450
(10.9)
3070
(13.7)
3840
(17.1)
4140
(18.4)
5120
(22.8)
7070
(31.4)
9200
(40.9)
1. Values shown are for a shear plane acting through the anchor bolt
body. When the shear plane is acting through the anchor bolt threads,
reduce the shear values by 15%.
590
(2.6)
670
(3.0)
650
(2.9)
1290
(5.7)
1390
(6.2)
1310
(5.8)
2130
(9.5)
2310
(10.3)
1870
(8.3)
2850
(12.7)
3470
(15.4)
2320
(10.3)
4130
(18.4)
4930
(21.9)
4050
(18.0)
6000
(26.7)
7670
( 34.1)
530
(2.4)
1040
(4.6)
1470
(6.5)
1970
(8.8)
2450
(10.9)
3070
(13.7)
3840
(17.1)
4140
(18.4)
5120
(22.8)
7600
(33.8)
9200
(40.9)
630
(2.8)
670
(3.0)
750
(3.3)
1370
(6.1)
1440
(6.4)
1450
(6.4)
2400
(10.7)
2530
(11.3)
2130
(9.5)
3290
(14.6)
3730
(16.6)
2670
(11.9)
4800
(21.4)
5870
(26.1)
4670
(20.8)
7070
(31.4)
8670
(38.6)
Shear Through The Threads
5120
(22.8)
8140
(36.2)
9200
(40.9)
5870
(26.1)
6320
(28.1)
5070
(22.6)
8400
(37.4)
9200
(40.9)
10670
(47.5)
Shear Through The Bolt Body
reduce the shear value by 7%.
All other values shown are for shear plane acting through either body
or threads.
156
5120
(22.8)
Anchoring Systems
4.3.3
Carbon Steel Kwik Bolt II Ultimate Loads in Concrete

Anchor
Diameter
in. (mm)
/4
(6.4)
/8
(9.5)
/2
(12.7)
/8
(15.9)
/4
(19.1)
6000 psi (41.4 MPa)
Tension
lb (kN)
Shear
lb (kN)
Tension
lb (kN)
Shear
lb (kN)
Tension
lb (kN)
Shear
lb (kN)
11/8
(29)
1000
(4.4)
1600
(7.1)
1230
(5.5)
1600
(7.1)
1430
(6.4)
1600
(7.1)
1750
(7.8)
1600
(7.1)
22
(51)
2100
(9.3)
3 /4
(95)
2500
(11.1)
2000
(8.9)
2500
(11.1)
2000
(8.9)
15/8
(41)
2000
(8.9)
3900
(17.3)
3200
(14.2)
3900
(17.3)
2 1/21
(64)
4500
(20.0)
4 1/41
(108)
5000
(22.2)
5500
(24.5)
5800
(25.8)
5500
(24.5)
2 1/4
(57)
4400
(19.6)
7360
(32.7)
6500
(28.9)
7360
(32.7)
3 1/2 2
(89)
7000
(31.1)
9200
(40.9)
10500
(46.7)
9200
(40.9)
11500
(51.2)
10000
(44.5)
11500
(51.2)
14200
(63.2)
15700
(69.8)
14200
(63.2)
15500
(68.9)
12000
(53.4)
15500
(68.9)
6
(152)
7800
(34.7)
2 3/4
(70)
6000
(26.7)
42
(102)
9000
(40.0)
72
(178)
12000
(53.4)
3 1/4
(83)
7400
(32.9)
4 3/4 2
(121)
11000
(48.9)
(25.4)
4000 psi (27.6 MPa)
Shear
lb (kN)
3000 psi (20.7 MPa)
Tension
lb (kN)
2000 psi (13.8 MPa)
Embedment
Depth
in. (mm)
8
(203)
15000
(66.7)
4 1/2
(114)
12500
(55.6)
6
(152)
18500
(82.3)
9
(229)
25000
(111.2)
2000
(8.9)
3700
(16.5)
5500
(24.5)
7250
(32.2)
9200
(40.9)
11500
(51.2)
14200
(63.2)
15500
(68.9)
19200
(85.4)
26500
(117.9)
34500
(153.5)
reduce the shear values by 15%.
2225
(9.9)
2500
(11.1)
2450
(10.9)
4825
(21.5)
5200
(23.1)
4925
(21.9)
8000
(35.6)
8650
(38.5)
7000
(31.1)
10670
(47.5)
13000
(57.8)
8700
(38.7)
15500
(68.9)
18500
(82.3)
15200
(67.6)
22500
(100.1)
28750
(127.9)
2000
(8.9)
3900
(17.3)
5500
(24.5)
7360
(32.7)
9200
(40.9)
11500
(51.2)
14200
(63.2)
15500
(68.9)
19200
(85.4)
28500
(126.8)
34500
(153.5)
2350
(10.5)
2500
(11.1)
2825
(12.6)
5150
(22.9)
5400
(24.0)
5450
(24.2)
9000
(40.0)
9500
(402.3)
8000
(35.6)
12350
(54.9)
14000
(62.3)
10000
(44.5)
18000
(80.1)
22000
(97.9)
17500
(77.8)
26500
(117.9)
32500
(144.6)
Shear Through The Threads
19200
(85.4)
30500
(135.7)
34500
(153.5)
22000
(97.9)
23700
(105.4)
19200
(85.4)
19000
(84.5)
31500
(140.1)
34500
(153.5)
40000
(177.9)
Shear Through The Bolt Body
reduce the shear value by 7%.
All other values shown are for shear plane acting through either body
or threads.
157
Anchoring Systems
4.3.3
Kwik Bolt II AISI 304 and 316 Stainless Steel Allowable Loads in Concrete
Anchor
Diameter
in. (mm)
/4
(6.4)
/8
(9.5)
/2
(12.7)
/8
(15.9)
/4
(19.1)
1
(25.4)
158
2000 psi (13.8 MPa)
3000 psi (20.7 MPa)
4000 psi (27.6 MPa)
Embedment
Depth
in. (mm)
Tension
lb (kN)
Shear
lb (kN)
Tension
lb (kN)
Shear
lb (kN)
Tension
lb (kN)
11/8
(29)
240
(1.1)
560
(2.5)
330
(1.5)
570
(2.5)
350
(1.6)
2
(51)
470
(2.1)
33/4
(95)
550
(2.4)
590
(2.6)
550
(2.4)
590
(2.6)
550
(2.4)
15/8
(41)
430
(1.9)
880
(3.9)
490
(2.2)
1010
(4.5)
550
(2.4)
21/2
(64)
930
(4.1)
41/4
(108)
1070
(4.8)
21/4
(57)
850
(3.8)
31/2
(89)
1330
(5.9)
6
(152)
1470
(6.5)
23/4
(70)
1250
(5.6)
4
(102)
1870
(8.3)
7
(178)
2400
(10.7)
31/4
(83)
1550
(6.9)
2880
(12.8)
1950
(8.7)
3310
(14.7)
2350
(10.5)
43/4
(121)
2510
(11.2)
4510
(20.1)
3250
(14.5)
4650
(20.7)
3870
(17.2)
8
(203)
2930
(13.0)
4800
(21.4)
3870
(17.2)
4800
(21.4)
4530
(20.2)
41/2
(114)
3120
(13.9)
6080
(27.0)
3870
(17.2)
6770
(30.1)
4610
(20.5)
6
(152)
4400
(19.6)
9
(229)
5600
(24.9)
1330
(5.9)
1810
(8.1)
2220
(9.9)
2800
(12.5)
3330
(14.8)
7470
(33.2)
1090
(4.8)
1330
(5.9)
1070
(4.8)
1730
(7.7)
1880
(8.4)
1600
(7.1)
2400
(10.7)
3010
(13.4)
6400
(28.5)
8000
( 35.59)
1330
(5.9)
1850
(8.2)
2220
(9.9)
3070
(13.7)
3330
(14.8)
7470
(33.2)
1250
(5.6)
1440
(6.4)
1280
(5.7)
2130
(9.5)
2290
(10.2)
Shear
lb (kN)
590
(2.6)
9390
(41.77)
Shear
lb (kN)
550
(2.4)
590
(2.6)
1150
(5.1)
670
(3.0)
1230
(5.5)
1330
(5.9)
1440
(6.4)
1330
(5.9)
1890
(8.4)
1330
(5.9)
2220
(9.9)
2400
(10.7)
2220
(9.9)
2720
(12.1)
1920
(8.5)
3330
(14.8)
3650
(16.2)
7200
(32.0)
Tension
lb (kN)
370
(1.6)
1810
(8.1)
2930
(13.0)
6000 psi (41.4 MPa)
3200
(14.2)
3330
(12.5)
3650
(16.2)
3730
(16.6)
4800
(21.4)
2610
(11.6)
4670
(20.8)
4800
(21.4)
5120
(22.8)
4800
(21.4)
7470
(33.2)
7330
(32.6)
9390
(41.8)
7470
(33.2)
Anchoring Systems
4.3.3
Kwik Bolt II AISI 304 and 316 Stainless Steel Ultimate Loads in Concrete
Anchor
Diameter
in. (mm)
/4
(6.4)
/8
(9.5)
/2
(12.7)
/8
(15.9)
/4
(19.1)
1
(25.4)
2000 psi (13.8 MPa)
3000 psi (20.7 MPa)
4000 psi (27.6 MPa)
Embedment
Depth
in. (mm)
Tension
lb (kN)
Shear
lb (kN)
Tension
lb (kN)
Shear
lb (kN)
Tension
lb (kN)
11/8
(29)
900
(4.0)
2100
(9.3)
1250
(5.6)
2150
(9.6)
1300
(5.8)
2
(51)
1750
(7.8)
33/4
(95)
2070
(9.2)
2200
(9.8)
2070
(9.2)
2200
(9.8)
2070
(9.2)
15/8
(41)
1600
(7.1)
3300
(14.7)
1825
(8.1)
3800
(16.9)
2050
(9.1)
21/2
(64)
3500
(15.6)
41/4
(108)
4000
(17.8)
21/4
(57)
3200
(14.2)
31/2
(89)
5000
(22.2)
6
(152)
5500
(24.5)
23/4
(70)
4700
(20.9)
4
(102)
7000
(31.1)
7
(178)
9000
(40.0)
31/4
(83)
5800
(25.8)
10800
(48.0)
7300
(32.5)
12400
(55.2)
8800
(39.1)
43/4
(121)
9400
(41.8)
16900
(75.2)
12200
(54.3)
17450
(77.6)
14500
(64.5)
8
(203)
11000
(48.9)
18000
(80.1)
14500
(64.5)
18000
(80.1)
17000
(75.6)
41/2
(114)
11700
(52.0)
22800
(101.4)
14500
(64.5)
25400
(113.0)
17300
(77.0)
6
(152)
16500
(73.4)
9
(229)
21000
(93.4)
5000
(22.2)
6800
(30.2)
8340
(37.1)
10500
(4.7)
12500
(55.6)
28000
(124.5)
4100
(18.2)
5000
(22.2)
4000
(17.8)
6500
(28.9)
7050
(31.4)
6000
(26.7)
9000
(40.0)
11300
(50.3)
24000
(106.8)
30000
(133.5)
5000
(22.2)
6950
(30.9)
8340
(37.1)
11500
(51.2)
12500
(55.6)
28000
(124.5)
4700
(20.9)
5400
(24.0)
4800
(21.4)
8000
(35.6)
8600
(38.3)
Shear
lb (kN)
2200
(9.8)
35200
(156.6)
Shear
lb (kN)
2070
(9.2)
2200
(9.8)
4300
(19.1)
2500
(11.1)
4600
(20.5)
5000
(22.2)
5400
(24.0)
5000
(22.2)
7100
(31.6)
5000
(22.2)
8340
(37.1)
9000
(40.0)
8340
(37.1)
10200
(45.4)
7200
(32.0)
12500
(55.6)
13700
(60.9)
27000
(120.1)
Tension
lb (kN)
1400
(6.2)
6800
(30.2)
11000
(48.9)
6000 psi (41.4 MPa)
12000
(53.4)
12500
(55.6)
13700
(60.9)
14000
(62.3)
18000
(80.1)
9800
(43.6)
17500
(77.8)
18000
(80.1)
19200
(85.4)
18000
(80.1)
28000
(124.5)
27500
(122.3)
28000
(124.5)
35200
(156.6)
159
Anchoring Systems
4.3.3
Carbon Steel Kwik Bolt II Allowable Loads in Lightweight Concrete
Anchor
Diameter
in. (mm)
Embedment
Depth
in. (mm)
11/8
( 29)
1/4
(6.4)
Shear
2000 psi (13.8 MPa)
lb (kN)
400 ( 1.8)
Tension
2000 psi (13.8 MPa)
lb (kN)
225 (1.0)
Tension
3000 psi (20.7 MPa)
lb (kN)
295 ( 1.3)
Tension
4000 psi (27.6 MPa)
lb (kN)
350 ( 1.6)
2 2
( 51)
500
( 2.2)
325
(1.4)
390
( 1.7)
450
( 2.0)
15/8
( 41)
775
( 3.5)
425
(1.9)
530
( 2.4)
625
( 2.8)
21/2 1
( 64)
1375
( 6.1)
625
(2.8)
810
( 3.6)
975
( 4.3)
21/4
( 57)
1400
( 6.2)
725
(3.2)
920
( 4.1)
1100
( 4.9)
31/2 2
( 89)
2300
(10.2)
1100
(4.9)
1360
( 6.1)
1600
( 7.1)
5/8
23/4
( 70)
2500
(11.1)
1125
(5.0)
1350
( 6.0)
1550
( 6.9)
(15.9)
4 2
(102)
3550
(15.8)
1650
(7.3)
1990
( 8.9)
2300
(10.2)
3/4
31/4
( 83)
3250
(14.5)
1575
(7.0)
1905
( 8.5)
2200
( 9.8)
43/4 2
(121)
4700
(20.9)
2200
(9.8)
2750
(12.2)
3250
(14.5)
3/8
(9.5)
1/2
(12.7)
(19.1)
1. Values shown are for a shear plane acting through the anchor bolt body. When the shear plane is acting through the anchor bolt threads, reduce the shear values by 15%.
2. Values shown are for a shear plane acting through the anchor bolt body. When the shear plane is acting through the anchor bolt threads, reduce the shear values by 7%.
3. Based on using a safety factor of 4.
Carbon Steel Kwik Bolt II Allowable Loads through the Ridge of Metal Profile Deck into Lightweight Concrete
Anchor Diameter
in. (mm)
Embedment Depth
in. (mm)
fc=3000 psi
(20.7 Mpa)
1/4 (6.4)
2 1/4 (57)
560 (2.5)
490 (2.2)
3/8 (9.5)
2 1/4 (57)
790 (3.5)
1000 (4.4)
Tension, lb (kN)
Shear, lb (kN)
1/2 (12.7)
2 1/4 (57)
880 (4.0)
1000 (4.4)
5/8 (15.9)
4 1/2 (114)
1675 (7.4)
2575 (11.4)
Carbon Steel Kwik Bolt II Allowable Loads in Grout Filled Concrete Masonry Units 1, 3, 4, 5, 6, 7
Anchor
Diameter
in. (mm)
Embedment
Depth 2
in. (mm)
/4
11/8
(29)
(6.4)
(51)
1 /8
(41)
2 /2
(64)
/2
2 /4
(57)
(12.7)
31/2
(89)
2 /4
(70)
(102)
31/4
(83)
/8
(9.5)
1
/8
(15.9)
/4
(19.1)
43/4 (121)
Distance from
Edge
in. (mm)
4
12
4
12
4
12
4
12
4
12
4
12
4
12
4
12
16
4
12
16
4
12
16
(101.6)
(304.8)
(101.6)
(304.8)
(101.6)
(304.8)
(101.6)
(304.8)
(101.6)
(304.8)
(101.6)
(304.8)
(101.6)
(304.8)
(101.6)
(304.8)
(406.4)
(101.6)
(304.8)
(406.4)
(101.6)
(304.8)
(406.4)
Tension
lb (kN)
Shear
lb (kN)
200 (0.9)
370
( 1.6 )
410 (1.8)
570
( 2.5 )
430 (1.9)
850
( 3.8 )
725 (3.2)
1050 ( 4.7 )
750 (3.3)
1050
1400
1050
1890
1050
2120
1050
2120
2700
1050
2120
2600
1050
2120
3110
975 (4.3)
1100 (4.9)
1460 (6.5)
1450 (6.5)
1465 (6.5)
1620 (7.2)
( 4.7 )
( 6.2 )
( 4.7 )
( 8.4 )
( 4.7 )
( 9.4 )
( 4.7 )
( 9.4 )
(12.0)
( 4.7 )
( 9.4 )
(11.6)
( 4.7 )
( 9.4 )
(13.8)
1. Values are for Light weight, Medium weight or Normal weight

concrete masonry units conforming to ASTM C90 with 2000 psi
grout conforming to ASTM C474.
2. Embedment depth is measured from the outside face of the
concrete masonry unit.
3. Values are for anchors located in the grouted cell, bed joint,
cross web or any combination of the above.
4. For anchors installed in the T joint or head joint reduce tension values
by 20%.
5. Values for edge distances between 4 inches and 12 inches and
between 12 inches and 16 inches can be calculated by linear
interpolation.
6. Anchors are limited to one per unit cell.
Countersunk Kwik Bolt II Allowable Loads in Concrete 1

Anchor
Diameter
in. (mm)
/4
(6.4)
/8
(9.5)
Bolt
Material
Carbon Steel
Stainless Steel
Carbon Steel
Stainless Steel
Embedment 3000 psi (20.7 MPa)

Depth
Shear2
Tension
in. (mm)
lb (kN)
lb (kN)
450
350
(2.0)
(1.6)
11/8
(29)
480
500
(2.1)
(2.2)
15/8
(41)
810
(3.6)
880
(3.9)
750
(3.3)
1330
(5.9)

2. Shear values for shear plane acting thru threads of anchor bolt.
160
HCKB (Hilti Ceiling Kwik Bolt) Allowable Loads1

Anchor
Diameter
in. (mm)
Embedment
Depth
in. (mm)
/4
17/16
(37)
(6.4)
3000 psi (20.7 MPa)

Normal Wt. Concrete
Tension
Shear
lb (kN)
lb (kN)
675
(3.0)
155
(0.69)
3000 psi (20.7 MPa)

Lightweight Concrete
Tension
Shear
lb (kN)
lb (kN)
465
(2.1)
145
(0.65)
Anchoring Systems
4.3.3
Anchor Spacing and Edge Distance Guidelines 1, 2 (See Anchoring Technology Section 4.1.3)
Minimum Embedment
/4
/8
Anchor
in.
Size
(mm)
(6.4)
(9.5)
in.
(mm)
11/8
(29)
15/8
(41)
hmin
/2
/8
/4
(12.7) (15.8) (19.1) (25.4)

21/4
(59)
23/4
(70)
31/4
(83)
41/2
(114)
/4
s
V
Standard Embedment
/4
/8
Anchor
in.
Size
(mm)
(6.4)
(9.5)
in.
(mm)
2
(51)
21/2
(64)
hnom
c
1
/2
/8
(12.7) (15.8) (19.1) (25.4)

31/2
(89)
4
(102)
43/4
(121)
6
(152)
1. For s and c of anchors with actual embedments between the listed embedments, use linear interpolation.
2. For s and c of anchors with embedments greater than the deepest embedment listed, use value for deepest embedment listed.
Anchor Spacing Adjustment Factors

scr
2.0
s
hnom
or
s
hmin
Shear &
Tension
s
hmin
hnom
fA
smin
Actual anchor spacing

Minimum depth of embedment
Standard depth of embedment
Anchor spacing reduction factor for shear and tension
1.0 hnom
for
hef hnom
sc = 2.0 hnom
smin
1.0
=
=
=
=
=
smin = 1.0 hef

scr = 2.0 hef
}
}
for
hmin < hef < hnom
0
0
0.7
1.0
Anchor Spacing Adjustment Factor
(fA)
Edge Distance Adjustment Factors

ccr
1.5
ccr
3.0
Tension
Shear
cmin
1.0
c
hnom
or
c
hmin
cmin
1.5
c
hmin
0
0
c
hmin
hnom
fRN
ccr
cmin
=
=
=
=
=
0.8
1.0
Anchor Edge Distance Adjustment
Factor for Tension
( fRN)
Actual edge distance

Edge distance reduction factor for tension
1.5 hnom
ccr = 1.5 hef
for
hef hnom
= 1.0 hnom
cmin = 1.0 hef
for
hmin hef < hnom
0.5
1.0
Anchor Edge Distance Adjustment
Factor for Shear
( fRV)
c
hmin
hnom
fRV
ccr
cmin
=
=
=
=
=
Actual edge distance

Edge distance reduction factor for shear
3.0 hmin
for
hef hmin
= 1.5 hmin
161
Anchoring Systems
4.3.3
Influence of Anchor Spacing and Edge Distance fA, fR (hmin = minimum embedment)
Load Adjustment Factors (Anchor Spacing) fA
Load Adjustment Factors (Edge Distance) fR

Tensile fRN
Shear fRV
Anchor Diameter
Anchor Diameter
Tensile/Shear
Spacing
s
in. (mm)
1
1 /8
15/8
2
21/4
21/2
23/4
31/4
33/4
41/2
5
51/2
6
61/2
7
8
9
( 29)
( 41)
( 51)
( 57)
( 64)
( 70)
( 83)
( 95)
(114)
(127)
(140)
(152)
(165)
(178)
(203)
(229)
Anchor Diameter
1
/4
.70
.83
.93
1.0
/8
/2
/8
/4
Edge
Distance
c
in. (mm)
1
.70
.77
.82
.86
.91
1.0
.70
.73
.77
.83
.90
1.0
.70
.75
.81
.89
.95
1.0
.70
.75
.82
.86
.91
.95
1.0
.70
.73
.77
.80
.83
.87
.93
1.0
1 /8
15/8
2
21/4
21/2
23/4
31/4
33/4
41/2
5
51/2
6
61/2
7
8
9
10
12
14
( 29)
( 41)
( 51)
( 57)
( 64)
( 70)
( 83)
( 95)
(114)
(127)
(140)
(152)
(165)
(178)
(203)
(229)
(254)
(305)
(356)
s + 0.40
hef
for scr > s > smin
/4
/8
.80
.97
1.0
.80
.89
.95
1.0
/2
.80
.84
.89
.98
1.0
/8
.80
.87
.95
1.0
/4
.80
.86
.95
1.0
/4
.50
.59
.67
.74
.81
.96
1.0
.80
.84
.89
.93
.98
1.0
/8
/2
.51
.56
.67
.77
.92
1.0
/8
.54
.61
.67
.73
.79
.85
.97
1.0
/4
.51
.56
.61
.67
.72
.82
.92
1.0
.52
.59
.67
.74
.89
1.0
c
hmin
for ccr > c > cmin
fRN = 0.4 c + 0.40

hef
for ccr > c > cmin
fA = 0.3
.56
.67
.74
.81
.89
.97
1.0
fRV = 0.333
Influence of Anchor Spacing and Edge Distance fA , fR (hnom = standard embedment)

Load Adjustment Factors (Anchor Spacing) fA
Load Adjustment Factors (Edge Distance) fR
Tension/Shear
Spacing
s
in. (mm)
2
21/4
21/2
23/4
31/4
33/4
41/2
5
51/2
6
61/2
7
8
9
10
12
14
16
18
( 51)
( 57)
( 64)
( 70)
( 83)
( 95)
(114)
(127)
(140)
(152)
(165)
(178)
(203)
(229)
(254)
(305)
(356)
(406)
(457)
Anchor Diameter
1
/4
.70
.74
.78
.81
.89
.96
1.0
/8
.70
.73
.79
.85
.94
1.0
/2
.72
.79
.83
.87
.91
.96
1.0
/8
.74
.78
.81
.85
.89
.93
1.0
s + 0.40
hnom
for scr > s > smin
fA = 0.3
162
/4
.72
.75
.78
.81
.84
.91
.97
1.0
.70
.73
.75
.80
.85
.90
1.0
Edge
Distance
c
in. (mm)
2
21/4
21/2
23/4
31/4
33/4
41/2
5
51/2
6
61/2
7
8
9
10
12
14
16
18
( 51)
( 57)
( 64)
( 70)
( 83)
( 95)
(114)
(127)
(140)
(152)
(165)
(178)
(203)
(229)
(254)
(305)
(356)
(406)
(457)
Tension fRN
Shear fRV
Anchor Diameter
Anchor Diameter
/4
/8
.80
.85
.90
.95
1.0
.80
.84
.92
1.0
/2
.83
.91
.97
1.0
/8
/4
/4
.59
.67
.74
.81
.96
1.0
.85
.90
.95
1.0
c + 0.40
hnom
for ccr > c > cmin
fRN = 0.4
.82
.86
.91
.95
1.0
.80
.83
.87
.93
1.0
/8
/2
.51
.56
.67
.77
.92
1.0
.56
.67
.74
.81
.89
.97
1.0
/8
.54
.61
.67
.73
.79
.85
.97
1.0
/4
.51
.56
.61
.67
.72
.82
.92
1.0
.52
.59
.67
.74
.89
1.0
c
hmin
for ccr > c > cmin
fRV = 0.333
Anchoring Systems
4.3.3
4.3.3.4 Installation Instructions

Kwik Bolt II Length Identification System
Stamp on Anchor
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
From 1-1/2 2 2-1/2 3 3-1/2 4 4-1/2 5 5-1/2 6 6-1/2 7 7-1/2 8 8-1/2 9 9-1/2 10
Length of Up To
Anchor
But Not 2 2-1/2 3 3-1/2 4 4-1/2 5 5-1/2 6 6-1/2 7 7-1/2 8 8-1/2 9 9-1/2 10 11
(inches) Including
S
11
T
U
12 13
V
14
W
15
X
16
Y
17
Z
18
12
13 14
15
16
17
18
19
Stamp on Anchor
AA
From 19
Length of Up To
Anchor
But Not 20
(inches) Including
YY
ZZ
BB
20
CC
21
DD
22
EE
23
FF
24
GG
25
HH
26
II
27
JJ
28
KK
29
LL
30
MM NN
31 32
OO
33
PP QQ
34 35
RR
36
SS
37
TT UU
38 39
VV WW XX
40
21
22
23
24
25
26
27
28
29
30
31
32
34
35
37
38
39 40
41
;; ;; ;; ;;
33
36
Length
Identification Mark
Kwik Bolt II (Stud Version) Installation Instructions
1. Hammer drill a hole the same

nominal diameter as the Hilti
Kwik Bolt II, with or without the
fixture in placethe Kwik Bolt
II works in a bottomless hole.
2. Clean hole with blow out bulb.
3. Drive the Hilti Kwik Bolt II far

enough into the hole so that at
least six threads are below the
top surface of the fixture, using
a Hilti 2 lb. hammer.
4. Tighten to the recommended

torque value with a torque
wrench, or if torque wrench is
not available, 2 or 3 turns from
the finger tight position to
achieve proper anchor setting.
3. Tighten the torque head with

ordinary wrench until nut
breaks away, leaving only
the free spinning sleeve and
tamper proof fastener.
4. Free turning protective sleeve

and tamper proof fastener
remain.
Hilti Tamper Proof Nut (HTN) Installation Instructions
1. Hammer drill a hole the same

nominal diameter as the Hilti
Kwik Bolt II with or without the
fixture in place. Clean hole
with a blow out pump or
compressed air.
2. Put protective sleeve and

tamper proof nut on Kwik Bolt
II so impact section (dog point)
is exposed. Drive anchor far
enough into the hole so that at
least six threads are below the
top surface of the fixture.
163
Anchoring Systems
4.3.3
Countersunk Kwik Bolt II Installation Instructions

1. Drill
2. Clean
6. Tighten
5. Tap-in again
4. Loosen
screw 2
full
turns
3. Thread
Post Nut
completely
onto
anchor.
Tap into
hole
Kwik Bolt II Rod Coupling Installation Instructions
1. Drill
2. Clean
3. Tap-in
4. Tighten
Hilti Ceiling Kwik Bolt (HCKB) Installation Instructions
1. Drill
164
2. Tap-in
3. Pry downward
4. Secure
Anchoring Systems
4.3.3
4.3.3.5 Ordering Information
Stud Version
Stud VersionExtra Thread
Countersunk Version
Rod Coupling
HCKB
Hilti Tamper Proof Nuts (HTN)

Description
Fits Bolt Size in.
Embedment
Item No.
Box Qty
Use With
Torque ft-lb
38 HTN
3/8
All
00071689
50
All 3/8" HKBII
23
12 HTN-M
1/2
hmin
00071690
50
1/2" HKBII
40
12 HTN-SD
1/2
hnom
00071691
50
1/2" HKBII
65
12 HTN-CSM
1/2
hmin
00248311
50
1/2" HKBII
65
58 HTN-SD
5/8
hnom
00071699
25
5/8" HKBII
110
HTN Removal Tool

Description
Item No.
For HTN Size
HTN Removal Tool 38

HTN Removal Tool 1258
00070973
00260212
3/8
1/2
Standard
Conical
165
Anchoring Systems
4.3.3

Item Number
Description
Diameter x Length
in.
1/4 x 13/4
1/4 x 2
3/4
(3/16" thread)
1/4 x 21/4
1/4 x 3
(3/16" thread)
1/4 x 31/4
1/4 x 4
(3/16 thread)
1/4 x 41/2
1/4 x 5
(3/16 thread)
3/8 x 21/4
3/8 x 3
3/8 x 33/4
3/8 x 4
3/8 x 5
3/8 x 7
1/2 x 23/4
1/2 x 33/4
1/2 x 41/2
1/2 x 51/2
1/2 x 7
5/8 x 3 3/4
5/8 x 43/4
5/8 x 6
5/8 x 7
5/8
x 81/2
5/8 x 10
3/4 x 43/4 1
3/4 x 51/2
3/4 x 7
3/4 x 8
3/4 x 10
3/4 x 12
1x6
1x9
1 x 12
Thread
Length
in. (mm)
(5/16 thread)
( 19)
( 11)
3/4
( 19)
7/16
( 11)
3/4
( 19)
7/16
(11)
3
( 76)
7/16
( 11)
7/8
( 22)
11/8 ( 28)
13/4 ( 44)
11/8 ( 28)
21/2 ( 38)
9/16
( 15)
11/8 ( 28)
31/4 ( 82)
4
(101)
11/4 ( 32)
11/4 ( 32)
21/4 ( 57)
11/4 (32)
3
( 76)
11/4 (32)
3
( 76)
4
(101)
11/2 ( 38)
11/2 ( 38)
21/2 ( 63)
11/2 ( 38)
11/2 ( 38)
4
(101)
1
3 /2 ( 89)
41/2 (114)
11/2 (38)
21/2 (63)
11/2 (38)
31/2 (89)
11/2 (38)
41/2 (114)
11/2 (38)
---- ---41/2 (114)
41/2 (114)
21/4 (57)
21/4 (57)
41/2 (114)
7/16
Threads
Box
per Inch Quantity
20
24
20
24
20
24
20
24
100
16
18
16
50
13
25
11
20
10
10
Carbon
Steel
00045359
---00045360
---00045361
---00045378
00045362
00045363
00331952
00045364
00331953
---00045365
00331954
00242538
00045366
00045367
00331955
00045368
00331956
00045369
00331957
00045379
00045370
00045371
00331958
00045372
00045373
00331959
00045380
00045381
00045374
00331960
00045375
00331961
00045376
00332044
00045377
---00332045
00045415
00045412
00045413
00045416
304
Stainless
Steel
316
304Stainless Carbon
Stainless Carbon Steel
Steel
Steel Rod
Steel
Countersunk 2 Countersunk 2 Coupling
00230984
---00230985
---00230986
------00238483
---00238484
------------00238486
---00238487
------------------00238491
---00238493
---00238492
------00045475
00045476
---00045477
-----------00045479
---00045480
---------------00045490
---00045483
-------
00045404
--00230394
00230395
00331962
00230396
00331963
---00230397
00331964
00045405
00229232
00229223
00331965
00229077
00331966
00229234
00331967
00229235
00045394
00045395
00331968
00045396
------00045407
00045408
00045398
00331969
00045399
00331970
00045400
---00045401
---00045409
00045410
00045402
00045403
00045411
---00045427
---00045428
---00045429
---00045431
00045431
00045432
---------00045433
00045434
----
---------00045435
---------------------------00045436
------------------------00045438
1. With 2" O.D. washer.

2. Round Post Nut heads available on special order. Contact the Hilti Customer Service Department for details.
166
HCKB
------0029630

KBII

Uploaded by

Copyright:

Available Formats

KBII

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

KBII

Uploaded by

Copyright:

Available Formats

What are the different types of expansion anchors discussed in the document?

What are the different types of expansion anchors discussed in the document?

What are some of the features of the Kwik Bolt II expansion anchor?

What are some of the features of the Kwik Bolt II expansion anchor?

Anchoring Systems

Kwik Bolt II Expansion Anchor (KB II)

4.3.3.1 Product Description

Impact section (Dog Point) prevents thread damage during installation

Mechanical expansion allows immediate load application

Underwriters Laboratory No. 203 Pipe Hangers (3/8"-3/4" diameters)

4.3.3.2 Material Specifications

Kwik Bolt II Expansion Anchor

4.3.3.3 Technical Data

hmin / hnom: minimum/standard

: anchor length min./max.

th: thread length/

dh: wedge clearance

h: min. base material thickness

3" (76 mm) or 1.3 hef , whichever number is greater

Combined Shear and Tension Loading

1.0 (Ref. Section 4.1.2.7)

Kwik Bolt II Expansion Anchor

Carbon Steel Kwik Bolt II Allowable Loads in Concrete

6000 psi (41.4 MPa)

4000 psi (27.6 MPa)

3000 psi (20.7 MPa)

2000 psi (13.8 MPa)

Shear Through The Threads

Shear Through The Bolt Body

Kwik Bolt II Expansion Anchor

Carbon Steel Kwik Bolt II Ultimate Loads in Concrete

6000 psi (41.4 MPa)

4000 psi (27.6 MPa)

3000 psi (20.7 MPa)

2000 psi (13.8 MPa)

Shear Through The Threads

Shear Through The Bolt Body

Kwik Bolt II Expansion Anchor

2000 psi (13.8 MPa)

3000 psi (20.7 MPa)

4000 psi (27.6 MPa)

6000 psi (41.4 MPa)

Kwik Bolt II Expansion Anchor

2000 psi (13.8 MPa)

3000 psi (20.7 MPa)

4000 psi (27.6 MPa)

6000 psi (41.4 MPa)

Kwik Bolt II Expansion Anchor

Carbon Steel Kwik Bolt II Allowable Loads in Lightweight Concrete

1. Values are for Light weight, Medium weight or Normal weight

Countersunk Kwik Bolt II Allowable Loads in Concrete 1

Embedment 3000 psi (20.7 MPa)

1. Based on using a safety factor of 4.

HCKB (Hilti Ceiling Kwik Bolt) Allowable Loads1

3000 psi (20.7 MPa)

3000 psi (20.7 MPa)

1. Based on using a safety factor of 4.

Kwik Bolt II Expansion Anchor

(12.7) (15.8) (19.1) (25.4)

(12.7) (15.8) (19.1) (25.4)