Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

New Perspectives For Citric Acid Production and Application

Download as pdf or txt
Download as pdf or txt
You are on page 1of 9

ISSN 1330-9862 review

(FTB-1643)
New Perspectives for Citric Acid Production and Application
Carlos R. Soccol
1
*, Luciana P. S. Vandenberghe
1
, Cristine Rodrigues
1
and Ashok Pandey
2
1
Bioprocess Engineering and Biotechnology Division, Department of Chemical Engineering,
Federal University of Paran, Curitiba-PR, Brazil
2
Biotechnology Division, Regional Research Laboratory, CSIR, Trivandrum 695 019, India
Received: November 10, 2005
Accepted: March 1, 2006
Summary
There is a great worldwide demand for citric acid consumption due to its low toxicity
when compared with other acidulants used mainly in the pharmaceutical and food indus-
tries. Other applications of citric acid can be found in detergents and cleaning products,
cosmetics and toiletries, and other. Global production has now reached 1.4 million tonnes
and there is annual growth of 3.54.0 % in demand/consumption of citric acid. As a result
of the adverse market conditions, only big producers have survived. Any increase in citric
acid productivity would be of potential interest and hence there is an obvious need to con-
sider all possible ways in which this might be achieved. The production by submerged
fermentation is still dominating. However, solid-state processes can create new possibili-
ties for producers. Many by-products and residues of the agro-industry can be used in the
production of citric acid. A cost reduction in citric acid production can be achieved by us-
ing less expensive substrates. The use of agro-industrial residues as support in solid-state
fermentation is economically important and minimizes environmental problems. Other per-
spectives for citric acid production sector are the improvement of citric acid producing
strains, which have been carried out by mutagenesis and selection.
Key words: citric acid, submerged fermentation, solid-state fermentation, agro-industrial re-
sidues
Introduction
Citric acid is the most important organic acid pro-
duced in tonnage by fermentation. Global production of
citric acid in 2004 was about 1.4 million tonnes estima-
ted by Business Communications Co. (BCC) in a recent
study of fermentation chemical markets. The report
showed that China accounts for 3540 % of worldwide
citric acid production. Leading producers of citric acid
for North America and Western European markets in-
clude ADM, Cargill, Tate & Lyle, DSM and Junbunzlau-
er. Israels Gadot Biochemical Industries and Chinas
Anhui BBCA Biochemical are also major suppliers. In-
tense competition and relatively low prices caused ma-
ny smaller citric acid manufacturers in North America
and Europe to exit the business in the past decade. Big
producers then benefited from the economy of scale (1).
The citric acid market has been under pressure for more
than two years and continues to oscillate with prices fal-
ling from $2/kg to $0.70$0.80/kg. Several producers,
including ADM and Tate & Lyle, have cut back on pro-
duction levels, while two years ago Aktiva closed down
a plant in the Czech Republic as a result of the adverse
market conditions. Chinese suppliers tend to sell their
citric acid at lowest price possible in order to bring in
hard currency and this has made it extremely hard for
European suppliers to compete (2).
Citric acid is widely used to impart a pleasant, tart
flavour to foods and beverages. It also finds applications
141
C.R. SOCCOL et al.: Citric Acid Production, Food Technol. Biotechnol. 44 (2) 141149 (2006)
*Corresponding author; Fax: ++55 41 33 613 191; E-mail: soccol@ufpr.br
as a function of additive detergents, pharmaceuticals,
cosmetics and toiletries. About 64 % of U.S. citric acid
usage in 2004 was for foods and beverages, 22 % for de-
tergents and cleaning products and 10 % for pharmace-
utical and nutritional products. About 2 % went into cos-
metics and toiletries. Around 2 % were used in different
applications. The actual price of citric acid is about $1 to
$1.3 per kilo. Due to the numerous applications and low
prices of citric acid, consumption is expected to grow
strongly, and considering slight price increases until
2009, the market value for citric acid will exceed $2 bil-
lion (3).
History of Citric Acid
Citric acid fermentation was first observed as a fun-
gal product by Wehmer in 1893 by a culture of Penicil-
lium glaucum on sugar medium. After a few years, he
isolated two new fungal strains with the ability to accu-
mulate citric acid, which were designated Citromyces
(Penicillium). However, industrial trials did not succeed
due to contamination problems and long duration of
fermentation. It was the work of Currie which opened
up the way for successful industrial production of citric
acid. In 1916, he found that numerous strains of Asper-
gillus niger produced significant amounts of citric acid.
The most important finding was that A. niger grew well
at pH values around 2.53.5 and high concentrations of
sugars favour citric acid production.
The first citric acid fermentations were carried out
in surface cultures. In the 1930s, some units were im-
planted in England, in Soviet Union, and in Germany
for the commercial production. In general, citric acid is
commercially produced by submerged microbial fer-
mentation of molasses; the fermentation process using
Aspergillus niger is still the main source of citric acid
worldwide. Although methods were well developed to
synthesise citric acid using chemical means, better suc-
cesses were achieved using microbial fermentations, and
over the period of time, this technique has become the
method of ultimate choice for its commercial production
over chemical synthesis (4).
Despite that, the introduction of submerged fermen-
tation presented several problems, including the choice
of productive strains with low sensitivity to trace ele-
ments. It was necessary to consider raw material much
more carefully. Several works were dedicated to the op-
timization of the conditions for the utilization of cheap
material like sugar cane molasses, beet molasses, starch
and hydrolysate starch (5). Various processes for treat-
ing and purifying molasses were developed, especially
for the removal of trace metals. Moreover, it was found
that a small excess of copper ions was beneficial to
achieve high yields of citric acid.
There are annual growths of 3.54.0 % in demand/
consumption of citric acid. In the last years, a consider-
able interest has been shown in using agricultural prod-
ucts as alternative sources of carbon and their wastes
such as maize, apple and grape pomace, pineapple,
mandarin orange and brewery wastes, citrus and kiwi
fruit peel for citric acid production by Aspergillus niger.
The industry is seeking newer cheap and economic pro-
cess technology.
Microbial Production of Citric Acid
Microorganisms
A large number of microorganisms including fungi
and bacteria such as Arthrobacter paraffinens, Bacillus li-
cheniformis and Corynebacterium ssp., Aspergillus niger, A.
aculeatus, A. carbonarius, A. awamori, A. foetidus, A. fonse-
caeus, A. phoenicis and Penicillium janthinellum; and yeasts
such as Candida tropicalis, C. oleophila, C. guilliermondii, C.
citroformans, Hansenula anamola and Yarrowia lipolytica
have been employed for citric acid production (611).
Most of them, however, are not able to produce com-
mercially acceptable yields due to the fact that citric acid
is a metabolite of energy metabolism and its accumula-
tion rises in appreciable amounts only under conditions
of drastic imbalances. Among the mentioned strains, the
fungus A. niger has remained the organism of choice for
commercial production because it produces more citric
acid per time unit. The problem in the production of cit-
ric acid for yeasts is the simultaneous formation of iso-
citric acid. The main advantages of using A. niger are its
ease of handling, its ability to ferment a variety of cheap
raw materials, and high yields. Industrial strains which
produce commercial citric acid are not freely available
and only a few can be obtained from international cul-
ture collections.
The improvement of citric acid producing strains
has been carried out by mutagenesis and selection. The
most employed technique has been by inducing mu-
tations in parental strains using mutagens (9,10,12).
Mutants of Aspergillus niger are used for commercial
production (13). Among mutagens, g-radiation, UV radi-
ation and chemical mutagens are often used. To obtain
hyper-producer strains, UV treatment can frequently be
combined with some chemical mutagens. The single-
-spore technique and the passage method are the
principal methods of selecting strains. The first one has
the disadvantage that mineral acid and organic acids
(gluconic and oxalic acids) simulate the presence of cit-
ric acid (810,14).
Different methods of fermentation can lead to dif-
ferent yields of citric acid production by the same strain.
Thus, a strain which produces good yields in the solid
fermentation or liquid surface is not necessarily good
producer in the submerged fermentation. In that way,
each method and raw material of industrial interest
should be tested with known producer strains (11).
In any technique used in citric acid production the
inoculation of microorganism is done by means of spores
which are added into the fermentation medium (11).
Spores can be inoculated either mixing them with the air,
which is introduced in substrate, or in form of a spore
suspension. Spores are produced in glass bottles on solid
substrates at optimum temperature (9). The type of
sporulation medium and time of incubation affect spore
viability and citric acid production by mycelia grown
from A. niger. It was mentioned that potato dextrose agar
gives high citric acid yields. Viability increases with time
of incubation, but higher production of citric acid was
achieved in less than 7 days of spore incubation (15). The
capacity of germination of the spores tends to reduce
with the time but in some cases, short periods of up to
142
C.R. SOCCOL et al.: Citric Acid Production, Food Technol. Biotechnol. 44 (2) 141149 (2006)
78 days do not present significant difference in relation
to spores collected after 3 days.
Substrates
Several raw materials such as hydrocarbons, starchy
materials and molasses, have been employed as sub-
strates for commercial submerged citric acid production
(Table 1) (6,10,1225), although citric acid is mostly pro-
duced from starch or sucrose based medium using sub-
merged fermentation. Generally, citric acid is produced
by fermentation using inexpensive raw material (5), in-
cluding crude natural products, such as hydrolysate
starch, sugar cane broth and by-products like sugar cane
and beet molasses (11).
Molasses is preferably used as the source of sugar
for microbial production of citric acid due to its rela-
tively low cost and high sugar content (4055 %) (6).
Since it is a by-product of sugar refining, the quality of
molasses varies considerably, and not all types are suit-
able for citric acid production. The molasses composi-
tion depends on various factors like the variety of beet
and cane, methods of cultivation, conditions of storage
and handling (transport, temperature variations), etc.
Both beet and cane molasses are suitable for citric acid
production, however, beet molasses is preferred to sug-
arcane due to its lower content of trace metals, supply-
ing better production yields than cane molasses, but
there are considerable yield variations within each type.
In the case of cane molasses, generally it contains some
metals (iron, calcium, magnesium, manganese, zinc)
which retard citric acid synthesis and it requires some
pretreatment for the reduction of them. Palmyra jaggery,
a sugar syrup from the palmyra palm is a novel sub-
strate for increasing the yield of citric acid production
(26). The addition of phytate (an important plant constit-
uent) at the beginning of incubation of beet molasses re-
sults in about 3-fold increase in citric acid accumulation
(27).
A variety of agro-industrial residues and by-products
has also been investigated with solid-state fermentation
techniques for their potential to be used as substrates
for citric acid production such as cassava bagasse, coffee
husk, wheat bran, apple pomace, pineapple waste, kiwi
fruit peel, grape pomace, citrus waste, etc. (Table 2)
143
C.R. SOCCOL et al.: Citric Acid Production, Food Technol. Biotechnol. 44 (2) 141149 (2006)
Table 1. Raw materials employed in submerged and semi-solid
production of citric acid
Raw material Strain
g(citric acid)
kg/m
3
Yield
%
Beet molasses A. niger ATTC 9142
Yarrowia lipolytica A101
109
54

68.7
a
Black strap molasses A. niger GCM 7 86
Brewery wastes A. niger ATTC 9142 19 78.5
Cane molasses A. niger T 55
A. niger GCMC-7

113.6
65
100
Carob pod extract A. niger 86
Coconut oil C. lipolytica N-5704 99.6
b
Corn starch A. niger IM-155 62
Date syrup A. niger ATTC 9142 50
Glycerol C. lipolytica N5704 58.8
b
Hydrolysate starch Y. lipolytica DS-1
Y. lipolytica A-101
A. niger UE-1

74

75
49
n-paraffin C. lipolytica N-5704 161
b
Olive oil C. lipolytica N-5704 119
b
Palm oil C. lipolytica N-5704 155
b
Rapeseed oil Y. lipolytica A-101
A. niger

57
115
b
Soybean oil Y. lipolytica A-101 63
Soybean oil C. lipolytica N-5704 115
b
Wood hemicellulose A. niger IMI-41874
S. lipolytica IFO 1658
27
9
45
a
41
Xylan hydrolisate A. niger YANG No. 2 72
Yam bean starch A. niger YW-112 74
a
a
based on sugar consumed,
b
based on oils and fatty acids
Table 2. Raw materials employed in solid-state production of
citric acid
Raw material Strain
w(citric acid)
g/kg
Yield
%
Apple pomace A. niger NRRL 2001
A. niger NRRL 2270
A. niger NRRL 599
A. niger NRRL 328
A. niger NRRL 567
A. niger BC1
766
a
816
a
771
a
798
a
883
a
124

80
Carob pod A. niger ATCC 9142 264 60
Carrot waste A. niger NRRL 2270 29
a
36
Cassava bagasse
Flasks
Semi-pilot scale
A. niger LPB-21
A. niger LPB-21
347
b
260
b
67

A. niger CFTRI 30 234


Cellulose hydrolysate
and sugar cane
A. niger 29 44
Coffee husk A. niger CFTRI 30 150
b

Corncob A. niger NRRL 2001


A. niger NRRL 2270
250
603.5
50
Deoiled rice bran A. niger CFTRI 30 92
Grape pomace A. niger NRRL 2001
A. niger NRRL 2270
A. niger NRRL 599
A. niger NRRL 328
A. niger NRRL 567
413
a
511
a
498
a
523
a
600
a
88

Kiwifruit peel A. niger NRRL 567 100


a

Kumara (starch
containing)
A. niger YANG No. 2 103
b

Molasses
(sugarcane
bagasse)
A. niger DS1
Clarified
Non-clarified molasses
198
179
64.5
62.5
Mussel processing
Wastes (polyure-
thane foams)
A. niger 300
Okara (soy residue) A. niger 51
a
53
Orange waste A. niger 46
Pineapple waste A. niger ATCC 1015
A. niger ACM 4942
132
b
194
b

74
Rice bran A. niger CFTRI 30 127
Sucrose (sugar
cane bagasse)
A. niger CFTRI 30 174
b

Sugarcane-pressmud
and wheat bran (4:1)
A. niger CFTRI 30 116
Wheat bran A. niger CFTRI 30 85
a
based on sugar consumed,
b
based on dry matter
(10,2842). It has been an increasing trend towards effi-
cient utilization of and value-addition to these residues,
besides being a form of reducing environmental con-
cerns. These residues are very well adapted to solid-
-state cultures due to their cellulosic and starchy nature.
A cost reduction in citric acid production can be achieved
by using less expensive substrates, such as industrial
waste products mentioned.
Citric acid production techniques
Citric acid production synthesis by fermentation is
the most economical and widely used way of obtaining
this product. More than 90 % of the citric acid produced
in the world is obtained by fermentation, which has its
own advantages: operations are simple and stable, the
plant is generally less complicated and needs less so-
phisticated control systems, technical skills required are
lower, energy consumption is lower and frequent power
failures do not critically affect the functioning of the
plant.
Citric acid production by fermentation can be divid-
ed in three phases, which include preparation and inoc-
ulation of the raw material, fermentation, and recovery
of the product. The industrial citric acid production can
be carried in three different ways: by submerged fer-
mentation, surface fermentation and solid-state fermen-
tation or Koji process (11,43-48). All of these methods
require raw material and inoculum preparation. In in-
dustrial citric fermentation, the large-scale spore produc-
tion is made by using appropriate means and conditions
such as direct inoculation in the production fermentor.
Sometimes it is necessary to remove the remainder mi-
neral of the raw material and add other nutrients such
as phosphorous, magnesium and nitrogen for develop-
ment of the mycelium and a good production of the ci-
tric acid.
Several types of fermentors have been used for citric
acid production in solid-state fermentation such as Erl-
enmeyer conical flasks, glass incubators, trays, rotating
and horizontal drum bioreactors (Fig. 1), packed-bed co-
lumn bioreactor, single-layer packed-bed, multi-layer
packed-bed, etc. (6,9,10,37,4345). Classically, the solid-
-state process has been carried out in trays, which facili-
tates aeration. Higher yields (347 g/kg dry cassava ba-
gasse) were obtained in flasks without any aeration, and
very little sporulation was observed (45). Equivalent
yields (309 g/kg of dry cassava bagasse) were obtained
in column reactors only with variable aeration. This fact
showed great perspective in using solid culture process
for citric acid production in simple tray type fermentors.
In fact, the scale-up study of production of citric acid
showed that in tray bioreactors with 4-cm bed thickness
263 g/kg of dry cassava bagasse were attained (45).
Submerged fermentation
The submerged technique is widely used for citric
acid production. It is estimated that about 80 % of world
production is obtained by submerged fermentation (10,
14,46). This fermentation process employed in large scale
requires more sophisticated installations and rigorous
control. On the other hand, it presents several advan-
tages such as higher productivity and yields, lower la-
bour costs, lower contamination risk and labour con-
sumption.
Submerged fermentation can be carried out in batch,
fed batch or continuous systems, although the batch
mode is more frequently used. Normally, citric fermen-
tation is concluded in 5 to 12 days, depending on the
process conditions.
Surface fermentation
Liquid surface culture is the classic citric production
process and was the first industrial manufacture; sub-
merged fermentation was developed only after that
(11,47,48). Surface fermentation is still used in industries
of small and medium scale because it requires less effort
in operation, installation and energy cost.
The process is carried out in fermentation chambers
where a great number of trays is arranged in shelves.
The culture solution is held in shallow trays with capac-
ity of 0.4 to 1.2 m
3
and the fungus develops as a my-
celial mat on the surface of the medium. The trays are
made of high purity aluminium, special grade steel or
polyethylene, however steel trays supply better yields of
citric acid (11,47,48). The fermentation chambers are pro-
vided with an effective air circulation, which passes over
the surface in order to control humidity and tempera-
ture by evaporative cooling. This air is filtered through
144
C.R. SOCCOL et al.: Citric Acid Production, Food Technol. Biotechnol. 44 (2) 141149 (2006)
Fig. 1. Outline of the horizontal drum bioreactor and auxiliary equipments:
(1) compressor, (2) air filter, (3) humidifier, (4) horizontal drum bioreactor, (5) axis, (6) motor, (7) speed controller, (8) air discharge,
(9) silica gel column, (10) automatic injector, (11) gaseous chromatograph, (12) computer
a bacteriological filter and the chambers should always
be in aseptic conditions and must be conserved princi-
pally during the first two days when spores germinate.
The most common contaminations are mainly caused by
penicillia, other aspergilli, yeasts and lactic bacteria.
During fermentation, which is completed in 8 to 12
days (8,11), high amount of heat is generated, so high
aeration rates are needed in order to control the temper-
ature and to supply air to the microorganism. After fer-
mentation, the tray contents are separated into crude
fermentation fluid and mycelial mats which are washed
to remove the impregnated citric acid (11).
Solid-state fermentation
Solid-state fermentation, also known by Koji pro-
cess, was first developed in Japan where abundant raw
materials such as fruit wastes and mainly rice bran are
available. It is the simplest method for citric acid pro-
duction and it has been an alternative method for using
agro-industrial residues (29,30,46,49,50). Solid-state cul-
ture is characterized by the development of microorga-
nisms in a low-water activity environment on an inso-
luble material that acts both as physical support and
source of nutrients (28). Some similarities are observed
with the surface process since the fungus also develops
on material surface. The substrate is solid and it is mois-
tened to about 70 % moisture, depending on the sub-
strate absorption capacity. The initial pH of the material
is normally adjusted to 4.56.0 and the temperature of
incubation is about 2830 C, depending on the microor-
ganism used (10,29,30,49,50). The solid culture process is
completed within 96 hours under optimal conditions (8).
The most common organism used in solid-state fer-
mentation is A. niger. However, there have also been re-
ports with yeasts. The strains with large requirements of
nitrogen and phosphorus are not ideal microorganisms
for solid culture due to lower diffusion rate of nutrients
and metabolites occurring at lower water activity in so-
lid-state process. The presence of trace elements may
not affect citric acid production so harmfully as it does
in submerged fermentation, thus, substrate pretreatment
is not required. This is one of the important advantages
of the solid culture (50).
Chemical factors affecting citric acid production
Citric acid accumulation is strongly influenced by
the type and concentration of carbon source (48,51). The
presence of carbohydrates which are rapidly taken up
by microorganisms has been found essential for a good
production of citric acid (11). Among the easily metabo-
lized carbohydrates, sucrose is the most favourable car-
bon source followed by glucose, fructose and galactose
(10,11,52). As presented previously, several raw materi-
als can be employed successfully for citric acid produc-
tion. However, there are some critical factors that should
be taken into account such as costs or need of pretreat-
ment for choosing the type of substrate. Molasses has
trace elements which must be precipitated by potassium
ferrocyanide. Table 3 shows the main factors that affect
citric acid production.
145
C.R. SOCCOL et al.: Citric Acid Production, Food Technol. Biotechnol. 44 (2) 141149 (2006)
Table 3. Chemical factors affecting citric acid production
Factor Positive effect Level Negative effect
Carbon source Sucrose
Glucose
Fructose
Galactose
1422 % Starch
Xylose
Arabinose
Sorbitol
Pyruvic acid
Phosphorus source Potassium dehydrogen phosphate low
(0.5 to 5.0 g/L)
Nitrogen source Ammonium nitrate
Ammonium sulfate
Peptone
Malt extract
Urea
under 25 %
0.1 to 0.4 gN/L
High concentrations
(biomass production)
Trace elements Zinc
Copper
Magnesium sulfate
low levels
(0.020.025 %)
Manganese
(1 ppm)
Lower alcohols Methanol
Ethanol
n-propanol
Iso-propanol
Methylacetate
14 % (volume per mass)
Oils and fats 0.050.3 %
Other compounds Calcium fluoride
Sodium fluoride
Potassium
3-hydroxy-2-naphtoic acid
4-methyl-umbelliferone
Benzoic acid
2-naphtoic acid
Iron cyanide
EDTA
Vermiculite
H2O2
Potassium ferrocyanide
Quaternary ammonium
compounds
Amine oxides
Phosphorous source
In the first works it was verified that the presence of
phosphate in the medium had a great effect on the yield
of citric acid. Low levels of phosphate have positive ef-
fect on citric acid production. This effect acts at the level
of enzyme activity and not at the level of gene expres-
sion. On the other hand, the presence of excess of phos-
phate leads to a decrease in the fixation of carbon diox-
ide, which in turn increases the formation of certain
sugar acids, and the stimulation of growth (6,8,10).
Nitrogen source
Citric acid production is directly influenced by the
concentration and nature of the nitrogen source. Physio-
logically, ammonium salts are preferred, such as urea,
ammonium nitrate and sulphate, peptone, malt extract,
etc. (6,10). Acid ammonium compounds are preferred
because their consumption leads to pH decrease, which
is essential for the citric fermentation. However, it is ne-
cessary to maintain pH values in the first day of fermen-
tation prior to a certain quantity biomass production.
The concentration of nitrogen source required for citric
acid fermentation is 0.1 to 0.4 g/L (8,11). High nitrogen
concentrations increase fungal growth and sugar con-
sumption but decrease the amount of citric acid pro-
duced (10).
Trace elements
Trace metal ions have a significant impact on citric
acid accumulation by A. niger (53). Divalent metal ions
such as zinc, manganese, iron, copper and magnesium
have been found to affect citric acid production. It is
crucial to take into account the interdependence of me-
dium constituents. There is elevated production of citric
acid only if a rigorous control of the trace elements
availability is accomplished, mainly in the submerged
process.
Lower alcohols
Lower alcohols added in pure material inhibit citric
acid production but if added into crude carbohydrates
these alcohols enhance the production. Methanol, etha-
nol, n-propanol, isopropanol or methylacetate neutralize
the negative effect of the metals in citric acid production
generally in amounts about 1 to 5 % (8). Even so, opti-
mal amount of methanol and ethanol depends upon the
strain and the composition of the medium. Alcohols
have been shown to act principally on membrane per-
meability in microorganisms by affecting phospholipid
composition. Other studies showed that alcohols stimu-
late citric acid production by affecting growth and spo-
rulation on space organization of the membrane or
changes in lipid composition of the cell wall (54).
Other compounds
Oils and fats are used in citric acid production to
control the foam formation. In addition, some oils stim-
ulate productivity and maintenance of fermentation pro-
cesses (8,11). This lipids act as carbon sources and they
are consumed during the fermentation, which is neces-
sary to maintain its level above 0.050.3 % (6,8,11).
Physical factors affecting citric acid production
pH
The pH of a culture may change in response to mi-
crobial metabolic activities. The most obvious reason is
the secretion of organic acids, such as citric acid, which
will cause the pH decrease. Changes in pH kinetics also
depend highly on the microorganism. With Aspergillus
sp., Penicillium sp. and Rhizopus sp., pH can drop very
quickly to less than 3.0. For other groups of fungi such
as Trichoderma, Sporotrichum, Pleurotus sp., pH is more
stable between 4.0 and 5.0. The nature of the substrate
and production technique also influence pH kinetics
(11). In this way initial pH must be very well defined
and optimized depending on the microorganism, sub-
strate and production technique.
Aeration
Since citric acid production is an aerobic process, ox-
ygen supply has a determinant effect on its production.
Increased aeration rates lead to enhanced yields and re-
duced process time. An interruption of aeration during
batch fermentation is quite harmful (11). Dissolved oxy-
gen concentration influences the citric acid formation di-
rectly. It is important to maintain the oxygen concentra-
tion above 25 % saturation (10). Critical dissolved oxygen
tension is 912 % of air saturation for growth phase and
1213 % of air saturation for the production phase (6,11).
The high demand of oxygen is reached by constructing
appropriate aeration devices, which is also dependent on
the viscosity of the fermentation broth. This is an addi-
tional reason why small compact pellets are the preferred
mycelial forms of A. niger during the production. When
the organism turns into development of filaments, the
dissolved oxygen tension rapidly falls to less than 50 %
of its previous value, even if the dry mass has not in-
creased by more than 5 %.
Aeration should be performed through the medium
during the whole process with the same intensity, even
though, due to economic reasons, it is usually preferred
to start with low aeration rates. The incorporation of the
oxygen together with air in submerged process results
in increment of citric acid production, but it is economi-
cally unviable (11). However, it is possible to circulate
the oxygen in the fermentor since the carbonic gas is re-
moved from the process. High aeration rates lead to
high amounts of foam, especially during the growth
phase, so the addition of antifoaming agents and the
construction of mechanical defoamers are required to
tackle this problem (10).
It has been reported that forced aeration at the be-
ginning of the process in solid-state fermentation packed-
-bed reactor affects metabolic rates, and thus, citric acid
productivity. The study of citric acid production by A.
niger in SSF revealed the importance of a CO
2
rich atmo-
sphere. Vandenberghe (30) showed that an environment
with high concentrations of CO
2
has a positive effect on
citric acid synthesis. The high partial pressure of CO
2
probably retards spore liberation of the filamentous fun-
gi and favours citric acid synthesis with cassava bagasse
as support/substrate. In fact, low oxygen environment
is directly involved in the growth limitation, which is
crucial for citric acid production. Low aeration rates
146
C.R. SOCCOL et al.: Citric Acid Production, Food Technol. Biotechnol. 44 (2) 141149 (2006)
(0.18 m
3
/kg dry CB/h) are supposed to limit the respi-
ration activity of A. niger and, consequently, to turn the
metabolism to citric acid synthesis and not to biomass
production. It was also observed that strongly aerated
cultures (0.3 m
3
/kg dry CB/h) increased sporulation. As
the sporulation increased, the accumulation of citric acid
decreased (30,45).
Product Recovery
The recovery of citric acid from fermented broth is
generally performed through three procedures: precipi-
tation, extraction and adsorption (mainly using ion ex-
change resins). The first method is the most frequently
used and it is applicable in all types of processes. The
second one requires a fermented broth with little impu-
rities. In both of the methods there is the need to re-
move the fermented broth, micelles of the fungus, and
materials in suspension by filtration (11).
Precipitation method is the classical method and it is
performed by the addition of calcium oxide hydrate
(milk of lime). The acid is transformed into tri-calcium ci-
trate tetrahydrate, which is lightly soluble. The precipi-
tate is recovered by filtration, treated with sulphuric acid
forming calcium sulphate (gypsum), which is filtered off.
Mother liquor of citric acid solution is treated with active
carbon and passed through cation and anion exchangers.
Finally, the liquor is concentrated in vacuum crystallizers
at 2025 C, forming citric acid monohydrate (6,911).
Anhydrous citric acid is obtained at crystallization tem-
perature higher than 36.5 C. The crystals are separated
by centrifugation and the dry stage is conducted at a
temperature bellow 36.5 C for monohydrate product
and above this for anhydrous product (8,11). Generally, a
bed flowing dryer is used. Two kinds of wastes are gen-
erated through precipitation technique: the microorgan-
ism residue contains proteins, amino acids, inorganic
matter, sugar, colloid, pigment, biotin, etc., and the other
is calcium sulphate. The first one can be dried and used
as forage or supplied to forage factory and the second
can be supplied to cement factories (11).
The solvent extraction is another alternative to puri-
fication and crystallization of citric acid. The mother li-
quor contains small amount of impurities captured by
the solvents. This method has the advantage of avoiding
the use of calcium hydroxide and sulphuric acid, which
are employed in great amounts, and the production of
gypsum. In this case a mixture of n-octyl alcohol, trido-
decylamine and isoalkane is used. Other solvents such
as acetone, methanol and ethanol were tested in order to
extract citric acid from solid particles in solid-state pro-
cesses. Better results using extraction technique at nor-
mal temperature (2025 C) were achieved with acetone,
followed by water, ethanol and methanol. Liquid-liquid
extraction of citric acid has been found to be a promis-
ing alternative to the conventional process. Suitable ex-
tractants as phosphorous-based oxygen-containing and
amine-based extractants, with functional groups effec-
tive for reversible complexation with acids, should be
used (13).
The main problems in citric acid production are still
the separation and purification steps. Several stages of
filtration, precipitation, crystallization and drying make
the process expensive and complicated. In recent years
some methods were developed to decrease the cost of
the recovery, trying to overcome the drawback of pre-
cipitation scheme, which is responsible for the formation
and disposal of enormous amounts of calcium sulphate,
leading to pollution problems.
Electrodialysis is an electrochemical separation pro-
cess in which electrically charged membranes and elec-
trical potential difference are used to separate ionic spe-
cies from aqueous solutions. This technique was tested
in citric acid recovery and shows that the separation of
ionic species from clarified fermentation broths is more
economical (6). The problem is that electrodialysis tech-
nique costs were found to be about 50 % greater than
current industrial-scale citric acid recovery process. The
great specific electromembrane and electric energy costs
appear to limit the electrodialysis applications only to
high value-added products. The use of electrodialysis
would need the development of new integrated fermen-
tation processes to minimize waste formation and en-
hance productivity (55).
Applications of Citric Acid
Citric acid is a versatile and innocuous alimentary
additive. It is accepted worldwide as GRAS (generally
recognized as safe), approved by the Joint FAO/WHO
Expert Committee on Food Additives (9,10,48). The food
and pharmaceutical industries utilize citric acid exten-
sively because of its general recognition of safety, pleas-
ant acid taste, high water solubility and chelating and
buffering properties.
Citric acid is used in cosmetics and toiletries as buf-
fer, and in a wide variety of industrial applications as a
buffering and chelating agent. Citric acid is also a reac-
tive intermediate in chemical synthesis. In addition, its
carboxyl and hydroxyl groups permit the formation of a
variety of complex molecules and reactive products of
commercial interest. Table 4 presents the main applica-
tions of citric acid (6,9,10,48).
147
C.R. SOCCOL et al.: Citric Acid Production, Food Technol. Biotechnol. 44 (2) 141149 (2006)
Table 4. Citric acid applications
Applications Industry Functions
Beverages Wines and
ciders
Prevents browning in some
white wines. Prevents turbidity
of wines and ciders. Used in pH
adjustment.
Soft drinks
and syrups
Provides tartness. Stimulates
natural fruit flavour. As acidulant
in carbonated and sucrose based
beverages.
Food Jellies,
jams and
preservatives
Used in pH adjustment. Acts as
acidulant. Provides the desired
degree of tartness, tang and
flavour. Increases the effectiveness
of antimicrobial preservatives.
Dairy
products
As emulsifier in ice creams and
processed cheese. Acidifying
agent and antioxidant in many
cheese products.
Candies Acts as acidulant. Provides
tartness. Minimizes sucrose
inversion. Produces dark colour
in hard candies. Prevents
crystallization of sucrose.
Conclusions
Citric acid is the most produced organic acid mea-
sured in tonnage. Its production has now reached 1.4
million tonnes per year and continues to increase more
each year. The main reason for constant increase is the
large number of applications that can be found for citric
acid, mainly in the food and pharmaceutical industries.
Traditional processes, such as the submerged fermenta-
tion using the fungus Aspergillus niger, dominate the glo-
bal production. However, different techniques of produc-
tion are continuously being studied showing new per-
spectives for the production of citric acid. In this context,
solid-state fermentation appears where agro-industrial
residues can be used as substrate-supports to the fila-
mentous fungi Aspergillus niger. Significant optimization
of all citric acid processes can be observed with genetic
amelioration of producer strains, which nowadays is the
powerful tool of the citric acid market.
References
1. G. Graf, Citric acid prices stable, but trend points up (2005)
(http://www.purchasing.com/article/CA624878.html).
2. P. Taylor, Chinese competion knives EU citric acid play-
ers, Food Navigator (2004) (http://www.foodnavigator-usa.com/
news/ng.asp?n=53236-chinese-competition-knives).
3. L. Partos, ADM closes citric acid plant as Chinese compe-
tition bites, Food Navigator (2005) (http://www.foodnavigator.
com/news/ng.asp?id=62537-adm-citric-acid-acidulant).
4. M. Mattey, The production of organic acids, Crit. Rev. Bio-
technol. 12 (1992) 87132.
5. S. Sarangbin, Y. Watanapokasin, Yam bean starch: A novel
substrate for citric acid production by the protease-nega-
tive mutant strain of Aspergillus niger, Carbohydr. Polym. 38
(1999) 219224.
6. H.S. Grewal, K.L. Kalra, Fungal production of citric acid,
Biotechnol. Adv.13 (1995) 209234.
7. Y. Ikeno, Y.M. Masuda, K. Tanno, I. Oomori, N. Takaha-
shi, Citric acid production from various raw materials by
yeasts, J. Fermentat. Technol. 53 (1975) 752756.
8. C.P. Kubicek, M. Rhr, Citric acid fermentation, Crit. Rev.
Biotechnol. 3 (1986) 331373.
9. A. Pandey, C.R. Soccol, J.A. Rodriguez-Leon, P. Nigam:
Production of Organic Acids by Solid-State Fermentation.
In: Solid-State Fermentation in Biotechnology Fundamentals
and Applications, Asiatech Publishers Inc., New Delhi, India
(2001) pp. 113126.
10. L.P.S. Vandenberghe, C.R. Soccol, A. Pandey, J.M. Le-
beault, Review: Microbial production of citric acid, Braz.
Arch. Biol. Technol. 42 (1999) 263276.
11. F. Yokoya: Citric Acid Production. In: Industrial Fermenta-
tion Series, Campinas, SP, Brazil (1992) pp. 182.
12. I.U. Haq, S. Khurshid, S. Ali, H. Ashraf, M.A. Qadeer, M.I.
Rajoka, Mutation of Aspergillus niger for hyperproduction
of citric acid from black strap molasses, World J. Microbiol.
Biotechnol. 17 (2001) 3537.
13. W. Jianlong, W. Xianghua, Z. Ding, Production of citric
acid from molasses integrated with in situ product separa-
tion by ion-exchange resin adsorption, Bioresour. Technol.
75 (2000) 231234.
14. M. Rhr, C.P. Kubicek, J. Kominek: Citric Acid. In: Biotech-
nology, Vol. 3, G. Reed, H.J. Rehm (Eds.), Verlag Chemie,
Weinheim, Germany (1983) pp. 419454.
15. M.G.F. Vergano, M.A. Soria, N.L. Kerber, Influence of ino-
culum preparation on citric acid production by Aspergillus
niger, World J. Microbiol. Biotechnol. 12 (1996) 655656.
16. E. Elimer, Citric acid production from rape seed oil by As-
pergillus niger, Food Technol. Biotechnol. 36 (1998) 189192.
17. Y.D. Hang, E.E. Woodams, Production of citric acid from
corncobs by Aspergillus niger, Bioresour. Technol. 65 (1998)
251253.
18. Y.D. Hang, E.E. Woodams, Microbial production of citric
acid by solid state fermentation of kiwifruit peel, J. Food
Sci. 52 (1987) 226227.
19. H. Kautola, W. Rymowicz, Y.Y. Linko, P. Linko, The utili-
zation of beet molasses in citric acid production with yeast,
Sci. Aliment. 12 (1992) 383392.
20. K. Kirimura, T. Watanabe, T. Sunagawa, S. Usami, Citric
acid production from xylan hydrolysate by semi-solid cul-
ture of Aspergillus niger, Biosci. Biotechnol. Biochem. 63 (1999)
226228.
21. S. Mourya, K.S. Jauhri, Production of citric acid from starch-
-hydrolysate by Aspergillus niger, Microbiol. Res. 155 (2000)
3744.
22. T. Roukas, P. Kotzekidou, Production of citric acid from
brewery wastes by surface fermentation using Aspergillus
niger, J. Food Sci. 51 (1986) 225228.
148
C.R. SOCCOL et al.: Citric Acid Production, Food Technol. Biotechnol. 44 (2) 141149 (2006)
Applications Industry Functions
Frozen fruit Protects ascorbic acid by
inactivating trace metals.
Lowers pH to inactivate
oxidative enzymes.
Fats and
oils
Synergist for other antioxidants,
as sequestrant. Stabilizing action.
Animal
feed
Feed complementation
Agriculture Micronutrient evaluation in
fertilizers. Enhances P
availability in plants.
Pharmaceutics Pharma-
ceuticals
As effervescent in powders
and tablets in combination with
bicarbonates. Anticoagulant.
Provides rapid dissolution of
active ingredients. Acidulant in
mildly astringent formulation.
Cosmetics
and toiletries
Buffering agent. pH adjustment.
Antioxidant as a metallicion
chelator.
Other Industrial
applications
Acts as buffer agent. Sequestring
metal ions. Neutralizes bases.
Used in nontoxic, noncorrosive
and biodegradable processes
that meet current ecological
and safety standards.
Metal
cleaning
Removes metal oxides from
the surface of ferrous and
nonferrous metals, for
operational cleaning of iron
and copper oxides.
In electroplating, copper plating,
metal cleaning, leather tanning,
printing inks, bottle washing
compounds, floor cement, textiles,
photographic reagents, concrete,
plaster, refractories and moulds,
adhesives, paper, polymers,
tobacco, waste treatment,
chemical conditioner on teeth
surface, ion complexation in
ceramic manufacture.
Table 4. continued
23. T. Roukas, Carob pod: A new substrate for citric acid pro-
duction by Aspergillus niger, Appl. Biochem. Biotechnol. 74
(1998) 4353.
24. T. Roukas, Production of citric acid from beet molasses by
immobilized cells of Aspergillus niger, J. Food Sci. 56 (1991)
878880.
25. L.P.S. Vandenberghe, C.R. Soccol, A. Pandey, J.M. Lebe-
ault, Solid-state fermentation for the synthesis of citric acid
by Aspergillus niger, Bioresour. Technol. 74 (2000) 175178.
26. P. Ambati, C. Ayyanna, Optimizing medium constituents
and fermentation conditions for citric acid production from
palmyra jaggery using response surface method, World J.
Microbiol. Biotechnol. 17 (2001) 331335.
27. M.Y. Lu, I.S. Maddox, J.D. Brooks, Application of a multi-
-layer packed-bed reactor to citric acid production in so-
lid-state fermentation using Aspergillus niger, Process Bio-
chem. 33 (1998) 117123.
28. J.M. Gonzlez, M.A. Fernndez, C. Pizarro, Application of
weakly basic copolymer polyacrylamide (acrylamide-co-
N,N,-dimethylaminoethyl methacrylate) gels in the recov-
ery of citric acid, Eur. Polym. J. 33 (1997) 475485.
29. M.B. Kolicheski, Production of citric acid by solid-state fer-
mentation using cassava bagasse as substrate, MSc Thesis,
Curitiba, Brazil (1995) p. 137.
30. L.P.S. Vandenberghe, Development of process for citric acid
production by solid-state fermentation using cassava agro-
-industrial residues, PhD Thesis, Universit de Technologie
de Compigne, Compigne, France (2000) p. 205.
31. N. Garg, Y.D. Hang, Microbial production of organic acids
from carrot processing waste, J. Food Sci. Technol. 32 (1995)
119121.
32. Y.D. Hang, E.E. Woodams, Apple pomace: A potential sub-
strate for citric acid production by Aspergillus niger, Bio-
technol. Lett. 6 (1984) 763764.
33. Y.D. Hang, E.E. Woodams, Grape pomace: A novel sub-
strate for microbial production of citric acid, Biotechnol. Lett.
7 (1985) 253254.
34. Y.D. Hang, D.F. Splittstoesser, E.E. Woodams, R.M. Sher-
man, Citric acid fermentation of brewery waste, J. Food Sci.
42 (1977) 383384.
35. W. Jianlong, Improvement of citric acid production by As-
pergillus niger with addition of phytate to beet molasses,
Bioresour. Technol. 65 (1998) 243245.
36. S.K. Khare, K. Jha, A.P. Gandhi, Citric acid production from
okara (soy-residue) by solid state fermentation, Bioresour.
Technol. 54 (1995) 323325.
37. M. Lu, J.D. Brooks, I.S. Maddox, Citric acid production by
solid-state fermentation in a packed-bed reactor using As-
pergillus niger, Enzyme Microb. Technol. 21 (1997) 392397.
38. J. Pintado, A. Torrado, M.P. Gonzlez, M.A. Murado, Op-
timization of nutrient concentration for citric acid produc-
tion by solid-state culture of Aspergillus niger on polyure-
thane foams, Enzyme Microb. Technol. 23 (1998) 149156.
39. T. Roukas, Citric acid production from carob pod by solid-
-state fermentation, Enzyme Microb. Technol. 24 (1999) 5459.
40. V.S. Shankaranand, B.K. Lonsane, Coffee husk: An inex-
pensive substrate for production of citric acid by Aspergil-
lus niger in a solid-state fermentation, World J. Microbiol.
Biotechnol. 10 (1994) 165168.
41. V.S. Shankaranand, B.K. Lonsane, Sugarcane-pressmud as
a novel substrate for production of citric acid by solid-
-state fermentation, World J. Microbiol. Biotechnol. 9 (1993)
377380.
42. C.T. Tran, L.I. Sly, D.A. Mitchell, Selection of a strain of
Aspergillus for the production of citric acid from pineapple
waste in solid state fermentation, World J. Microbiol. Bio-
technol. 14 (1998) 399404.
43. A. Pandey, Aspects of fermentor design for solid-state fer-
mentation, Process Biochem. 26 (1991) 355361.
44. M. Papagianni, M. Mattey, B. Kristiansen, The influence of
glucose concentration on citric acid production and mor-
phology of Aspergillus niger in batch and culture, Enzyme
Microb. Technol. 25 (1999) 710717.
45. L.P.S. Vandenberghe, C.R. Soccol, F.C. Prado, A. Pandey,
Comparison of citric acid production by solid-state fermen-
tation in flask, column, tray and drum bioreactor, Appl. Bio-
chem. Biotechnol. 118 (2004) 110.
46. J. Pallares, S. Rodriguez, A. Sanroman, Citric acid produc-
tion in submerged and solid state culture of Aspergillus ni-
ger, Bioprocess Eng. 15 (1996) 3133.
47. C.R. Soccol, L.P.S. Vandenberghe, J.M. Lebeault, Produc-
tion of citric acid by solid-state fermentation using A. ni-
ger. Patent Pt. Br. DEINPI/PR 00175 (1999).
48. C.R. Soccol, L.P.S. Vandenberghe, Overview of applied so-
lid-state fermentation in Brazil, Biochem. Eng. J. 13 (2003)
205218.
49. D.B. Xu, C.P. Madrid, M. Rhr, C.P. Kubicek, The influ-
ence of type and concentration of the carbon source on pro-
duction of citric acid by Aspergillus niger, Appl. Microbiol.
Biotechnol. 30 (1989) 553558.
50. M. Hossain, J.D. Brooks, I.S. Maddox, The effect of the su-
gar source on citric acid production by Aspergillus niger,
Appl. Microbiol. Biotechnol. 19 (1984) 393397.
51. T. Roukas, P. Kotzekidou, Influence of some trace metals
and stimulants on citric acid production from brewery
wastes by Aspergillus niger, Enzyme Microb. Technol. 9 (1987)
291294.
52. J. Dasgupta, S. Nasim, A.W. Khan, V.C. Vora, Production
of citric acid in molasses medium: effect of addition of
lower alcohols during fermentation, J. Microbiol. Biotechnol.
9 (1994) 123125.
53. Y.D. Hang, E.E. Woodams, Production of citric acid from
corncobs by Aspergillus niger, Bioresour. Technol. 65 (1998)
251253.
54. L.O. Ingram, T.M. Buttke, Effects of alcohols on microor-
ganisms, Adv. Microb. Physiol. 25 (1984) 253.
55. D.T. Friesen, W.C. Babcock, D.J. Brose, A.R. Chambers, Re-
covery of citric acid from fermentation beer using sup-
ported-liquid membranes, J. Membrane Sci. 56 (1991) 1227
1241.
149
C.R. SOCCOL et al.: Citric Acid Production, Food Technol. Biotechnol. 44 (2) 141149 (2006)

You might also like