Accessories Andrew PDF

Accessories FOR HELIAX
PRODUCTS
PRODUCT SEL ECT I ON GUI DE 2007
Table of Contents
1 Andrew Corporation phone 1.800.255.1479 1.708.873.2307 fax 1.800.349.5444 1.779.435.8579 www.andrew.com
A
B
D
A
D
E
F
C
A Cable Hoisting and Attachment
B Weatherproofing
C Cable Entry
D Grounding Kits
E Grounding Bars
F Arrestor Plus
Surge Arrestors
Introduction
Cable Installation Accessories
Cable Hoisting and Attachments ................................................. 8
Weatherproofing ....................................................................... 19
Cable Entry ............................................................................... 22
Installation Aids......................................................................... 24
Lightning Protection
Grounding Kits .......................................................................... 30
Grounding Bars ......................................................................... 34
Surge Arrestors ........................................................................ 37
Appendixes
Appendix 1: Quarterwave Stub Surge Arrestors ....................... 40
Appendix 2: Gas Tube Surge Arrestors .................................... 43
Appendix 3: dc Passing T-Series Surge Arrestors .................... 46
Appendix 4: Lightning Strike Probability .................................. 47
Appendix 5: Additional Documents .......................................... 48
Appendix 6: Hanger Spacing Guidelines .................................. 49
Index ............................................................................................... 58
Andrew Corporation phone 1.800.255.1479 1.708.873.2307 fax 1.800.349.5444 1.779.435.8579 www.andrew.com 2
Andrews Clear Advantage
Around the globe, in a world being transformed by communications, people anticipate more
than ever that wireless services will enhance their lives, workplaces, and communities.
With the convergence of voice, data, and video, we experience the promise of mobilityand we experience
Andrew. Andrew supports the emerging mobile society, and the companies that make this todays reality, with
complete wireless solutions. Our customers represent the leading wireless, broadband, and satellite communication
providers of the world. We support all major operators and OEMs in every region and are extremely proud of these
relationships, many of which we have served for decades.
Andrew solutions are technology agnostic and unbiased regarding platform, frequency and technology evolution,
even within our own product portfolio.
With our broad base of products, we support more global markets and offer more knowledge and experience in
licensing, spectrum analysis and utilization, asset optimization, and customized, multi-prong problem-solving for
building, optimizing, and enhancing networks for growth and success.
Simply, we understand your challenges and are uniquely prepared to help as an unmatched one-stop resource for
managing the entire life cycle of wireless networks.
Andrew provides products and solutions for the entire RF footprint with our Antenna and Cable passive products
and our Wireless Network Solutions active products. Our substantial investment in global research and development
ensures a pipeline of new products and solutions that address our customers evolving network requirements.
The Andrew flash represents an enviable 70-year legacy of customer service that brings us to today, with over
11,000 employees in 35 countries, and an unmatched global distribution network that ensures that our customers
receive essential support wherever and whenever they need it. Our talents, expertise, and commitment are always
nearby, and our local presence in every region of the world ensures cost-effective products and on-time delivery
and services.
Everywhere you look, the promise of mobility is hereand we at Andrew promise to listen, anticipate, and innovate,
and to continue to earn the trust and respect of our customers.
n
Base Station Antenna and
Remote Electrical Downtilt
Systems
n
Microwave Antennas
n
Coaxial Foam, Air, and
Specialty Cable
n
Connectors, Surge
Arrestors, and Assemblies
n
Broadband Cables
n
Site Installation Products
and Services
n
Bias Tees
ANTENNA AND
CABLE PRODUCTS
n
Single-Carrier Power
Amplifiers
n
Multicarrier Power
Amplifiers
n
Custom In-Cabinet
Amplifiers
n
Custom In-Cabinet Filters
n
Tower Mounted Amplifiers
n
Filters/Combiners
n
Integrated Products
n
Micro/Pico Cells
n
Remote Radio Heads
n
After Market Services
BASE STATION
SUBSYSTEMS
n
Geolocation and
Location Based Services/
Geolocation Mobile
Location Solutions
n
Spectrum Management
n
Network Optimization
n
Network Infrastructure and
Program Management
n
Advanced Data Collection
NETWORK
SOLUTIONS
n
RF Repeaters
n
RF Boosters
n
Optical Distribution
Networks
n
Radiating Cable
n
Passive Splitters,
Combiners, Duplexers,
Terminators, and Indoor
Antennas
n
Operations and
Maintenance Center
n
Turnkey System
Design and Project
Management
WIRELESS
INNOVATIONS
n
Direct-to-Home Outdoor Units
n
Very Small Aperture Terminal
Outdoor Units
n
Earth Station Antennas
n
Gateway Systems
n
MilSatCom Antenna Systems
n
Government/Radar Antennas
n
RF Electronics
n
Site Installation and Services
SATELLITE
COMMUNICATIONS
Antenna and Cable Products Segment
Wireless Network Solutions Segment
Planning Software
AASPthe first and only PCS/Cellular Systems Design Software
Design your PCS or cellular system in
less time, with greater accuracy and
lower costs with advanced Andrew
Antenna Systems Planner software
(AASP). Powerful AASP software
graphically guides you through the
entire design process, from the
choice of frequency to the avail-
able shipping options. The programs
dynamic, rule-based logic generates
custom solutions by using standard Andrew
products while automatically checking component compatibility.
Upon completion, AASP provides you with a customized bill of
materials of the Andrew parts necessary for the system. AASP is
available on the Andrew Powertools CD or as a download from
www.andrew.com.
OnePack
SM
Site Kits
The Answer for More Efficient System Build-outs
Todays global build-out demands new solutions that speed system
deployment and simplify supply chain management. To help system
managers better achieve these goals, Andrew offers kits for wire-
less RF communications systems sites. OnePack Site Kits provide
the critical components in easy to order, easy to manage packages.
System designers and managers can be confident of shortened
project planning and execution cycles, improved efficiency, and
dependable system performance.
Customer Support Center (CSC)
Service Around the Clock, Around the World
Contact the Andrew Customer Support Center for:
d
Technical support
d
Order status
d
Coordinating product service, repairs, or replacement
d
Product information
d
Replacement materials
Call toll free from:
North America 1-800-255-1479
Fax 1-800-349-5444
International:
United Kingdom 0800-250055
Australia 1800-803 219
New Zealand 0800-441-747
Call from other areas: +1 708-873-2307
Services
Installation Techniques to Ensure Quality!
Andrew products and people are at the forefront of connecting
the wireless world. As the industry evolves, the Andrew Institute

is committed to providing you with quality, effective training.
Our trainers deliver knowledge that can develop your skills and
self-assurance, as well as benefit your system performance and
reliability. Dedicated Andrew Institute trainers will share their proven
installation techniques and expertise with you in one- or
two-day sessions.
Build an Agenda Customize Your Training:
Connector Attachment
(1 hour per connector)
d
Cable concepts
d
Connector attachment
d
Accessories
RET Antenna
(2 hours)
d
Antenna concepts
d
Mounting techniques
d
Weatherproofing
d
Inspection and maintenance
5 Andrew Corporation phone 1.800.255.1479 1.708.873.2307 fax 1.800.349.5444 1.779.435.8579 www.andrew.com Andrew Corporation phone 1.800.255.1479 1.708.873.2307 fax 1.800.349.5444 1.779.435.8579 www.andrew.com 5
More customers are mandating that technicians installing their systems
are registered as having completed Andrew Institute training.
Orland Park, Illinois USA
Lochgelly, Scotland
Sorocaba, Brazil
Suzhou, China
Andrew Institute Technical Training
You will learn:
d
How to obtain the highest possible performance with every Andrew
product installed
d
System fundamentals and how components work together
d
Proper installation of cable, connectors, and accessories through
hands-on practice
d
TMW systems fundamentals and essential elements of path alignment
d
Pressurization systems theory of operation and installation techniques
d
Proper path alignment
d
Fundamentals of VSWR sweep testing, insertion loss, and TDR/FDR plots
The Andrew Institute welcomes the opportunity to serve the industry. We
can bring select courses to your facility, or you can come to any one of our
convenient training locations.
Terrestrial Microwave Systems
(2 days)
d
RF theory/TMW fundamentals
d
Antenna installation
d
Path alignment
d
Pressurization fundamentals
For more information visit our Web site at: www.andrew.com
Registration is available online or call: +1-779-435-6231
Fundamentals of VSWR
(4 hours)
d
Typical site configuration
d
Plot/sweep interpretation
d
Troubleshooting
Selection Guide
Elements of a Cable Mounting and Protection System
Once youve selected the cable and connectors for your system, the cable mounting and protection system must
be planned. Andrew offers a comprehensive line of installation accessories and lightning protection systems to
help you realize your communications systems full potential.
Hoisting Grips
Select a hoisting grip to safely raise the
cable and hold it during hanger attachment.
In some cases, a hoisting grip must also be
used with a calibrated clamp, available from
Andrew, to provide permanent support for
the cable.
Hangers
The type or shape of the structure, the space
available for cable attachment, the type of
environment the system will be exposed to,
and the ease of installation or maintenance
are key considerations. Many hanger options
are available, and many variables have
tradeoffs that affect total hanger system cost.
The table on page 18 will help you select the
best hangers for your system and budget.
Weatherproofing
Weatherproofing keeps connector interfaces
tight and adds an additional layer of protection
against the environment. Andrew offers three
types of weatherproofing. A standard weather-
proofing kit provides universal coverage
and uses butyl and vinyl tapes to wrap
connector surfaces. Our 3M Cold Shrink
weatherproofing kit uses a self-shrinking
technology to reduce installation time. New
WeatherShield enclosures seal and protect
connectors for the environment in seconds.
Cable Entry
The final step in a base station installation
is to bring the cable into the building or
radio cabinet. Two basic types of cable
entry systems are available: a standard
building entry, and an integrated system
that combines cable entry and lightning
surge suppression into one efficient system.
Grounding Kits
A grounding kit diverts transient currents
from lightning off the transmission line
to an earth grounding system to prevent
damage to cable and radio equipment. A
typical installation uses three grounding
kits: near the top of the main feeder cable,
at the bottom of the main feeder prior to the
horizontal run, and just prior to the cable
entering the building. Andrew offers three
kit types to meet the requirements of your
system and budget.
Surge Arrestors
Andrew Arrestor Plus
surge arrestors
provide the last stage of an effective
lightning protection system. Install them
to divert lightning transients off the inner
conductor of your coaxial cable before they
reach your radio equipment. Select from a
variety of surge arrestors to meet your
exact requirements.

( Cable Hoisting and Attachment
( Weatherproofing
( Cable Entry
( Installation Aids
C
A
B
L
E

I
N
S
T
A
L
L
A
T
I
O
N

A
C
C
E
S
S
O
R
I
E
S
Cable Hoisting and Attachment
Support/Hoisting Grip
Safer, Faster Cable Hoisting
Lift and support cable in your monopole or on your tower faster and
more safely and without the threat of slippage. Our one-piece grip
and locking clamp speed and simplify installation by eliminating time
consuming lacing.
Use at 200 ft (60 m) intervals to raise cable and provide permanent
cable support. Basic kit includes one grip and one support clamp.
Support clamps are also available in kits of 10. Installation tool is
required.
Part Number Part Number
Support Grip Support Clamp Cable Size Cable Type
F1SGRIP F1SGRIP-1IK 1/4" FSJ1
L1SGRIP L1SGRIP-1IK 1/4" LDF1
E2SGRIP E2SGRIP-2IK 3/8" EFX2
C2SGRIP C2SGRIP-2IK 3/8" CNT-400
L45SGRIP L45SGRIP-45IK 5/8" LDF4.5
L5SGRIP L5SGRIP-5IK 7/8" LDF5, VXL5
L6SGRIP L6SGRIP-6IK 1-1/4" LDF6, VXL6
L7SGRIP L7SGRIP-7IK 1-5/8" LDF7, VXL7
L12SGRIP L12SGRIP-12IK 2-1/4" LDF12
3CCGRIP RET cable
Part Number Description
SG-IT Support Clamp Installation Tool
Standard Hoisting Grip
For Transmission Line Installation
Use at 200 ft (60 m) intervals to raise cable on tower. Use with addi-
tional support clamp to achieve optimum cable grip.
Hoisting Grip Support Clamp Cable Size
43094 L4SGRIP-4IK 1/2"
29958 L45SGRIP-45IK 5/8"
19256B L5SGRIP-5IK 7/8"
29961 L6SGRIP-6IK 1-1/4"
24312A L7SGRIP-7IK 1-5/8"
31535 L12SGRIP-12IK 2-1/4"
26985A 3"
34759 4"
31031-1 5"
Use the support/hoisting grip whenever possible. Rely on the standard,
lace up hoisting grip only when connectors are pre-attached or you have
to place a grip in the middle of a cable run over 200 ft.
TIP!
TIP!
Snap-In Hangers
Attachment with No Hardware!
Andrew Snap-In hangers provide quick and easy attachment in all types
of weather. The hangers snap directly into holes in the tower support
members. Installation time and costs are substantially reduced. These
hangers feature cable gripping tabs to prevent cable slippage, and are
constructed of heavy gauge stainless steel for high strength and excel-
lent corrosion resistance. Waveguide versions include a heavy UV resis-
tant rubber insert to secure the elliptical waveguide.
206706A-6 For 5/8" cable
206706A-5 For 2-1/4" cable
EWSH-52 For EW52 waveguide
EWSH-127A For EW127A waveguide
SnapStak
Hangers
No more worries about fumbling with hardware or losing small
partsbecause there arent any!
New antenna systems can now be added to crowded multiple-tenant
towerswith minimal space! SnapStak snap-in hangers can be
stacked up to three deep when using 1/2 in and 7/8 in coaxial cable, or
two deep when using 1-1/4 in and 1-5/8 in coaxial cable. Each hanger
accommodates one run of HELIAX
cable.
The distinctive, self-contained design of the SnapStak stackable snap-
in hanger eliminates the need for mounting hardware and installation
tools. This simplifies coaxial cable installations, lowering both time and
cost.
Retention tabs on the spring fork make SnapStak hangers highly resis-
tant to pop-out, so installations are robust and secure. Yet, specially
designed to dampen vibrations, SnapStak hangers do not have a rigid
hold on the tower, so motion caused by wind is simply absorbed. This
reduces movement down the coaxial cable, greatly reducing stress on
the connections at the jumper cable, antenna, or device.
SnapStak hangers can be mounted directly to the tower support
system, or used in conjunction with a variety of mounting accessories
for rooftops, buildings, and water towers. The SnapStak hanger installs
in 3/4 in holes in support structures 1/8 in (0.120 in to 0.150 in)
thick. The stainless steel construction of the SnapStak snap-in hanger
provides exceptional integrity, even in highly corrosive environments and
extreme weather conditions. Compact installations save tower space.
And maintenance is easy, since SnapStak stackable snap-in hangers
are self sufficientno hardware required for installation! Mounts to
pre-punched 3/4 in (19 mm) holes, kit of 10.
SSH-12 SnapStak hanger kit for 1/2" corrugated cable
SSH-78 SnapStak hanger kit for 7/8" corrugated cable
SSH-114 SnapStak hanger kit for 1-1/4" corrugated cable
SSH-158 SnapStak hanger kit for 1-5/8" corrugated cable
SSHAK-3812 SnapStak hanger kit for RET cable
SSHA-38 Insert, adapts 1/2" snap in hanger to RET cable
United States Patents: 6,345,543, 6,899,305, and 6,161,804.
Other patents pending.
Snap-In Tower Standoffs
For mounting snap-in hangers to round support members. Adapter is
designed with 3/4 in pre-punched hole. Adapter provides 2-1/2 in (60
mm) standoff. All parts are stainless steel or galvanized, kit of 10.
Part Number Member Diameter, in (mm)
STS3-12 12 (2550)
STS3-23 23 (5075)
STS3-34 34 (75100)
STS3-45 45 (100125)
SnapStak
Hanger Tool
Specially designed pliers make installation and removal of SnapStak
snap-in hangers extremely easy. The spring loaded pliers are designed
with a hook that holds and spreads the hanger open to slip easily over
the cable. Serrated pads then squeeze the hanger together for effortless
insertion into the mounting structure. Insulated handle and a lanyard
hole make it easy to hang on to.
SHT-4 SnapStak hanger tool, quantity 1
UA-3 Universal snap-in adapter, kit of 10
Universal Angle Adapter Insert
Insert transitions the universal adapters 3/4 in to a 3/8 in hole diameter,
which allows the use of standard hangers.
UAAI Universal angle adapter Insert, kit of 10
Each part sold separately
( UA-3
( UAAI
Universal Snap-In Adapter
The universal snap-in adapter is a versatile device for securing coaxial
cable hangers to structures such as communications towers, rooftops,
buildings and water towers.
The universal snap-in adapter secures coaxial cable to any round or
angle tower members where pre-punched holes are not easily acces-
sible. The adapter has a pre-punched 3/4 in hole that allows the installer
to mount cable hangers such as Andrew SnapStak snap-in hangers
to wireless communications towers or other structures. Stainless steel
construction for long life.
Universal Adapter Applications
Cluster Support Bracket
The cluster support bracket is a versatile means to support multiple
runs of coaxial cable in virtually any application. The oval design allows
coaxial cable to be run inside and outside of the bracket, which maxi-
mizes its capacity. Each bracket features 3/4 in holes to accommodate
snap-in hangers and 3/8 in holes for butterfly hangers using standard
3/8 in hardware. The cluster support bracket supports seven runs of
coaxial cable. Sold in units of one, U-bolt hardware sold separately.
CS-B Cluster support bracket with U-bolt
for 2-3/8" round member attachment
PVC Roof Sleeper
Support rooftop coaxial cable runs using the snap-in PVC roof sleepers.
PVC roof sleepers are pre-punched with 3/4 in holes to accommodate
snap-in hangers. Sleepers are made of a gray 4 in (102 mm) x 4 in (102
mm), UV-resistant PVC material.
MT-F1598 4 run, 22" (559 mm) length
MT-F1599 8 run, 32" (810 mm) length
MT-F1600 12 run, 43" (1102 mm) length
Snap-In Adapter Bracket
This bracket is used in conjunction with WRAPLOCK
and is used on
large, round members, water towers, or outside of a monopole. The
brackets slide on the WRAPLOCK and hold up to six runs of coaxial
cable. You can use multiple brackets for the number of runs required
for your system. The galvanized steel bracket supports both standard
hangers and snap-in hangers. Accommodates six runs of snap-in
hangers and four runs of click-on hangers.
RM-USBG Snap-in adapter bracket, kit of 10
12395-1 Stainless steel WRAPLOCK
Universal Snap-In Bracket
These galvanized steel brackets are designed to work on both angle
and round members. They are pre-punched with 3/4 in holes to hold
snap-in hangers or standard hangers.
SS-TB2550 Universal snap-in bracket, for 1-1/2" to 5-9/16"
round member 2-1/2" to 5" angle member.
Accommodates six snap-in or standard hangers.
SS-TB6080 Universal snap-in bracket, for 6" to 10-3/4"
round member 6" to 8" angle member
accommodates six snap-in or standard hangers.
Anchor Rail Adapter
Anchor rail adapters make cable installation fast, secure,
and neat.
These one-piece, one-size, self-contained anchor rail adapters require
no tools and snap into common strut or anchor rail systems, such as
UniStrut
Metal Framing. The 3/4 in hole accepts common snap-in

hangers. Adapters can be used for horizontal or vertical cable to produce
neatly aligned installations on large poles, smokestacks, rooftops, walls,
or any support structure.
United States Patent: 7,090,174. UniStrut is a registered trademark of the
UniStrut Corporation
ARA-22 Anchor rail adapter for 0.86" (22 mm) rails
(North American standard), kit of 10
Angle Adapter Attachment
Ceiling Adapter Attachment
Part Number Attachment Hardware
243684 Compact angle adapter, see page 16 for details
244350 Ceiling adapter, kit of 10
Round member adapter (various sizes) see page 16
Round Member Attachment
Flat Member Attachment
Click-On Hangers
Click-On HangersInstall Cable with One Easy Click
Specifically designed to support HELIAX
coaxial cable, stackable

click-on hangers install in just minutes and provide a perfect fit that
gives your PCS/PCN, cellular, microwave, rural telephony, GSM, or other
telecommunications system a professional appearance, especially in
confined spaces.
Available in either single or double versions, click-on hangers are
manufactured of tough UV-resistant material and set the standard for
durability, simplicity of installation, and cost effectiveness.
United States Patent: 5794897.
Double Single*
Part Number Part Number Description
L4CLICK L4SCLICK 1/2" hanger, kit of 10
L45CLICK 5/8" hanger, kit of 10
L5CLICKB L5SCLICKB 7/8" hanger, kit of 10
L6CLICK L6SCLICK 1-1/4" hanger, kit of 10
L7CLICK L7SCLICK 1-5/8" hanger, kit of 10
Snap-In Adapter Block
This snap-in adapter block is designed to accommodate a snap-in
hanger on each side of the block. You can attach this to the tower
with our standard angle adapters or tower standoffs. Stainless steel
construction.
SA-38 Snap-in adapter block, kit of 10
Click-On Hanger Hardware Kits
Click-on hanger attachment hardware is available in 3/8 in or M10
sizes. Constructed of stainless steel for durability. Select hardware
length according to planned hanger stack height. Each kit contains 10
threaded rods, 30 nuts, 40 flat washers and 20 lock washers. Note:
Click-on hangers accommodate two runs of cable and can be stacked
up to three deep to handle up to six runs.
Part Number Stack Height Cable Size Rod Length
(# of hangers) in (mm)
Imperial
243095-9 1 1/2" or 7/8" 3.75 (95)
243095-5 2 1/2" or 7/8" 5.40 (137)
243095-1 3 1/2" or 7/8" 7.00 (177)
243095-10 1 1-1/4" or 1-5/8" 4.75 (121)
243095-6 2 1-1/4" or 1-5/8" 7.25 (184)
243095-2 3 1-1/4" or 1-5/8" 9.75 (248)
Metric
243095-11 1 1/2" or 7/8" 3.97 (101)
243095-7 2 1/2" or 7/8" 5.50 (141)
243095-3 3 1/2" or 7/8" 7.10 (181)
243095-12 1 1-1/4" or 1-5/8" 5.00 (126)
243095-8 2 1-1/4" or 1-5/8" 7.30 (186)
243095-4 3 1-1/4" or 1-5/8" 9.90 (251)
Miniature Click-On Hangers
Fast, easy installation for small cables
Now installing small cables into hangers is accomplished in one easy
click with miniature click-on hangers.
Each compact, miniature click-on hangers accommodates two runs of
cable. Miniature click-on hangers are compact and stackable, making it
easy to install several runs of cable in confined spaces.
Miniature click-on hangers are cost effective and durable. With flexible
gripping ribs, the hanger provides secure support on a range of cable
sizes, and indexing on the hanger body helps align cables during
installation.
Specifically designed to accommodate small corrugated coaxial cables,
elliptical waveguide, and braided cable runs, miniature click-on hangers
provide a perfect fit for your installation. Hangers are packed in kits of
10. Attachment hardware made of anti-corrosion coated metal for long
service life is sold separately in kits of 10.
United States Patent: 7,007,900.
Select hardware by intended hanger stack height.
68MCLICK Click-on hangers for 6-8 mm cable;
FSJ1A, CNT-240, CNT-300
LDF1, EFX2, FSJ2, LDF2, CNT-400, EW380
FSJ4, LDF4-50A, CNT-500, CNT-600
252026-10KT Mini angle adapters, M8 tap
252027-10KT Single stack hardware for
mini click-on hangers, M8 thread
252028-10KT Double stack hardware for
252029-10KT Triple stack hardware for
Multi-run hangers are the best choice for installing cables where space
is very limited on crowded towers.
TIP!
TIP!
KwikClamp
Hangers
Multiple Run Cable Hangers for European Norms
Ideal for multiple run cable hangers designed exclusively for European-
style towers, cost effective KwikClamp cable hangers eliminate the need
for drilling and adapters. These self-clamping cable hangers attach
directly to round or flat tower members, providing sturdy, reliable,
long-term support to systems. Hangers are sold in kits of 10.
KwikClamp Ordering Information
See the table below to build a KwikClamp part number for your application.
1 Select your cable size and note the base part number shown
below that cable size.
2 Select the tower member type and the number of cable runs
for your application.
3 Locate the part number detail at the junction of the cable size
column and the tower member type row. The base part number
plus the part number detail indicates the full part number.
For example, the KwikClamp hanger part number for three runs of
7/8 inch cable on an 825 mm round tower member is L5CLAMP-RDN-3.
Cable and Hanger Type
Cable Size RG8 1/2" 5/8" 7/8" 1-1/4" 1-5/8"
Base Part Number R8CLAMP-( ) L4CLAMP-( ) L45CLAMP-( ) L5CLAMP-( ) L6CLAMP-( ) L7CLAMP-(
Tower Member Type # of
Runs Part Number Detail
3-11 mm 2 UNV-2
8-25 mm round or
3-25 mm at plate 1 RDN-1 RDN-1 RDN-1 RDN-1 RDN-1
2 RDN-2 RDN-2 RDN-2 RDN-2 RDN-2
3 RDN-3 RDN-3 RDN-3 RDN-3 RDN-3
Standard Hangers
Standard Hangers and HardwareFor Security and Flexibility
Standard hangers are designed for easy installation. The clamp locking
bolt and nut are pre-assembled and captivated to minimize installa-
tion labor. Proper tension is easy to determine. The hanger is simply
tightened until there is a 5/16 in gap between the clamp legs. The pre-
drilled hole for 3/8 in or 1/2 in mounting hardware and slots for round
member adapter clamps further simplify installation. See pages 1618
for accessories to adapt these hangers to most tower configurations.
Please refer to Appendix 6 for specific recommendations.
Hanger
Part Number Cable Size Photo Reference
43211A 3/8" A
43211A 1/2" A
42396A-9 5/8" B
42396A-5 7/8" B
42396A-1 1-1/4" B
42396A-2 1-5/8" B
42396A-4 2-1/4" B
31766A-11 3" C
31766A-10 4" C
Hanger Waveguide
Part Number Size Photo Reference
31766A-9 EW17 C
31766A-10 EW20 C
31766A-11 EW28 C
42396A-4 EW37 B
42396A-16 EW43 B
42396A-8 EW52 B
42396A-7 EW63 B
42396A-1 EW64 B
42396A-11 EW77 B
42396A-5 EW85 B
42396A-5 EW90 B
42396A-9 EW127A B
42396A-9 EW132 B
43211A EW180 B
43211A EW220 B
43211A EW240 B
Hardware Sets, Kit of 10
Imperial kits include 3/8 in fillister-head bolts, lock washers, and nuts
for attachment of standard hangers to drilled tower members. The
metric kit includes M10 bolts and lock washers for use with metric
angle adapters.
Part Number Length
31769-5 3/4" (19 mm)
31769-1 1" (25 mm)
243684-MH Metric M10 19 mm
Additional Mounting Hardware
Threaded Rod Support Kit for Standard Hangers.
Use to mount hangers away from supporting structure, under cable
bridge, and inside equipment room. Includes 3/8 in diameter threaded
rod, galvanized ceiling mounting plate, nuts, and washers. Attach to
angle tower members with 31768A angle adapters. Attach to round
tower members with 30848 series tower standoffs. All components are
stainless steel, except ceiling mounting plate.
Part Number Part Number Rod Length, in (mm)
Kit of 1 Kit of 5
31771 31771-4 12 (305)
31771-9 31771-6 24 (610)
31771-10 36 (915)
A B C
Angle Adapter
Stainless steel, kit of 10. For mounting 1/2 in to 4 in cable hangers
to angle tower members up to 7/8 in (22 mm) thick. Includes hanger
attachment hardware.
31768A 3/8" hardware
31768A-M Metric hardware
Round Member Adapter
Stainless steel clamps to mount 1/2 in to 4 in cable hangers to round
support members. Two each are needed for 3 in and 4 in cable
hangers, kit of 10.
31670-1 12 (2550)
31670-2 23 (5075)
31670-3 34 (75100)
31670-4 45 (100125)
31670-5 56 (125150)
31670-6 68 (150200)
Angle Adapter
Galvanized and Non-marring
For mounting 1/2 in to 2-1/4 in cable hangers to angle tower members
up to 3/4 in (19 mm) thick. Hanger attachment hardware sold sepa-
rately, kit of 10.
247763-I Tapped for 3/8" hardware
247763 Tapped for metric hardware
Compact Stainless Steel
Angle Adapters
These compact, lightweight, high quality stainless steel angle adapters
provide a cost saving option to standard adapters for many wireless
systems that use HELIAX
coaxial cable. These compact angle adapters

are suitable for use with single runs of HELIAX cable up to 2-1/4 in
in diameter. When used with our stackable click-on hangers, they can
accommodate up to six runs of 1-1/4 in cable or smaller cable and up
to four runs of 1-5/8 in cable. Includes 3/8 in or mid-hanger attach-
ment hardware,
kit of 10.
243684 Imperial angle adapter, kit of 10
243684-M Metric angle adapter, kit of 10
45 Adapter
Use with angle adapter and threaded rod support kit to place a hanger
at a waveguide bend, kit of 10.
42334 45 degree adapter, kit of 10
Clamp Head
MF39901-10 Clamp head, kit of 10
Nylon Cable Ties For Jumper Cable Attachment
Cable ties secure cable bundles where space is limited. They are an
excellent choice for organizing jumper cables within and between radio
cabinets and for bundling jumper cables. Nylon cable ties provide
support for small diameter cable 1/4 in to 1/2 in. Typical applica-
tions include securing jumper cables in buildings and along horizontal
antenna mounting arms.
40417 Nylon cable ties, 5/16" wide
14.5" long, kit of 50
Tower Standoff
Adapters with round member clamps and hardware for 1/2 in to 4 in
hangers. All parts are stainless steel or galvanized, kit of 10.
30848-5 0.751.5 (2040)
30848-4 1.53.0 (4075)
30848-1 34 (75100)
30848-2 45 (100125)
30848-3 56 (125150)

Hanger Type
Construction

Cable runs supported

Primary applications

Typical installation
time (minutes)***

Key feature

Benets
Attachment capability
(Tower member type)
Additional parts
needed
Tower adapters
(allows hanger
attachment to
various tower types)

SnapStak
Hangers
Stainless steel

1 to 3

Towers with
pre-punched cable
ladders, snap-in
accessories

7

Attaches cables in
compact bundles,
saving tower space

Fastest hanger
installation; No
additional hardware
needed
Attaches cables in
compact three run
bundles
Impervious to
environmental
extremes
Universal hanger
accommodates all
corrugated cables
3/4" drilled
cable ladder
Various adapters
(see pages 1011)
None
Cluster mount
Universal tower
adapter
Anchor rail adapter

Standard Hangers
Stainless steel

1

Tower installations
subject to high wind,
high corrosion, and
high ice

20

Stainless steel
tensioning hardware

Impervious to
environmental
extremes
Adaptable to various
tower congurations
3/8" (M10) drilled

cable ladder
Various adapters
(see pages 16-17)
Tower attachment
hardware kit
Round member
adapter
Angle adapter

Support/
Hoisting Grips*
Tin coated bronze

1

Monopole towers

2

Calibrated clamp
provides permanent
cable support

Quick installation
Monopole
application
Accommodates
single run of cable

All towers and
monopoles
None

None required

Cable Ties**
Nylon

1

Jumper cables and
inter-rack cabling

Universal fastening

Fits most cable sizes

and tower members
Quick installation
Inexpensive
Accommodates
single run of light-
weight cable

Round member,
angle member,
cable ladders
None

None required
Conditions
* Support grip or hoisting/support grip required with all cable installations
** Should only be used with 1/2 in cable and smaller
*** Installation time based on a 100 ft (30 m) run of 7/8 in cable with 3 ft (1 m) hanger spacing. Monopole application applied 200 ft intervals, 2 minutes.
Click-On Single,
Double, or
Miniature Hangers
Engineered plastic
single or double

2 to 6

Rooftops, water
towers, and towers
with limited space

20

Stackable up to
three high

Attaches cables in
compact six run
bundles
Versatile and
adaptable to almost
any application
Easy to install
click-on design
UV stable
3/8" (M10) drilled

hardware ladder
Various adapters
(see pages 1213)
Threaded rod and
hardware
Round member
adapter
Angle adapter

KwikClamp
Hangers
Stainless steel
and plastic

1 to 3

New or existing
towers

15

Built in tower
adapter

Requires no
additional
hardware for tower
attachments
Fits round, at angle,

and C-channel tower
members
Quick installation
UV stable
Round member
Angle member
channel section
Cable ladders
None
None required
Hanger Selection Guide
NEW! WeatherShield Reusable Connection Protection
Enclosures
For In-Line Connectors, Antennas, and Tower Top Devices
Complete your transmission line installation with WeatherShield connec-
tion protection enclosures which seal and protect connectors from the
environment.
This robust, one-piece weatherproofing enclosure offers an additional
measure of system protection by providing a high temperature resistant,
watertight seal around the connectors while also helping to dampen
vibration that can loosen connector interfaces over time.
The reusable enclosure contains an innovative trifold seal that provides
complete moisture block for installed connectors. The ease of instal-
lation on hard-to-reach connections and the long-term protection
provided by this enclosure makes it the most cost-effective solution
available today. The WeatherShield connection protection enclosure
takes just seconds to install. Simply place the housing around the
connector and snap the tabs together.
No tapes, tools, or shrink tubes are required. The Andrew WeatherShield
connection protection enclosures will accommodate Type N and
7-16 DIN connections and are compatible with Andrew HELIAX

cable,
SureFlex cable assemblies, and most brands of standard jumpers.
AWE-A12 Enclosure for 1/2" antenna connection/device
AWE-7812 Enclosure for 7/8" to 1/2" connections
AWE-11412 Enclosure for 1-1/4" to 1/2" connections
AWE-15812 Enclosure for 1-5/8" to 1/2" connections
Weatherproong
More Information: See the installation video at www.andrew.com/
products/trans_line/heliax/weathershield.aspx
Weatherproong
Part Number Minimum Application Diameter, in (mm)* Kit Coverage, Cable Size to Cable Size
Connectors, 7-16 DIN or Type N
245173 0.630.41 (1610.0) 3/8" through 1/2" to 3/8" through 1/2"
241475-13 0.800.29 (207.4) 1/4" through 5/8" to 1/4" through 1/2"
245171 0.840.29 (27.4) 7/8" to 1/4" through 1/2"
245172 1.200.29 (307.4) 1-5/8" or 1 1/4" to 1/4" through 1/2"
245175 1.400.41 (3610.0) 2-1/4" to 1/4" through 1/2"
Antennas, lters, ampliers, 7-16 DIN or Type N**
245174 0.840.29 (217.4) 1/2"7/8" jumpers to antenna
* Minimum application diameter is the fully compressed diameter of each tube in the kit.
**Andrew 3M Cold Shrink Weatherproofing is completely compatible with Andrew base station antennas.
See special publication SP50030 for specific application information on the use of Cold Shrink for antenna interfaces.
Weathertight Seal
Quickly Installs in Three Minutes
Complete your transmission line installation with the premier
weatherproofing product to seal and protect connectors, splices, surge
protectors, and jumper-to-antenna interfaces from the environment.
Andrew 3M Cold Shrink weatherproofing protects your investment
and your systems performance.
No Tools Required
Cold Shrink weatherproofing simply slips over the connection and
compresses around the interface. No tapes or heat guns are required
for sealing or shrinking. Simply place the Cold Shrink kit over the cable
and connector, make the connection, and unwind the pull-tab applicator.
Once it is collapsed, its continuous compression design forms a
watertight seal around the cable. Developed jointly by Andrew and 3M
Corporation, Cold Shrink weatherproofing has proven itself in thousands
of high power cable installations for more than 15 years.
Fits up to 2-1/4 in HELIAX
Cable
Kits are available for transitions from larger to smaller diameter cable,
such as 1-5/8 in to 1/2 in, or for same diameter cable, such as 1/2 in
to 1/2 in. See the table for part numbers.
3M and Cold Shrink are trademarks of Minnesota Mining and Manufacturing Company
Self-fusing Tape
Self-fusing and marking tape is a time saving alternative to traditional
butyl rubber sealant tapes. The silicone tapes are produced from
specially formulated UV-resistant silicone rubber. When applied to
RF connectors, the tape wraps bond together giving the connection
an additional layer of protection against water, dirt, and vibration.
Compared to conventional tapes, self-fusing tape is both easy to
apply and remove from connections.
Available in three colors options, self-fusing tape can also be used to
color code tower top cable installations, making it easy to locate cables
for monitoring purposes.
Part Number Description Quantity
FT-TB Self-fusing tape, black .030" x 1.5" x 15' 2 rolls
FT-TR Self-fusing tape, red .030" x 1.5" x 15' 2 rolls
FT-TW Self-fusing tape, white .030" x 1.5" x 15' 2 rolls
Weatherproong
Standard Weatherproofing Kit for Connectors
and Antennas
The application of sealing materials to antenna cable connections
protects them from weather conditions. These include moisture penetra-
tion and loosening of connections from vibrations caused by strong
winds. Andrew Corporation recommends weatherproofing these connec-
tions with standard weatherproofing tapes such as butyl and plastic
electrical tapes.
d
Main feeder cable-to-jumper cable connection
d
Jumper cable-to-antenna connection
This kit provides an additional moisture seal for cable connections.
It also prevents loosening of connections from vibration or other external
stresses, which would eventually allow moisture penetration. The sealed
connection is suitable for typical exposed and buried cable applications.
Weatherproong Connections Per Kit
Applications
Connection Type Per Kit
2-1/4" to 1/2" (57 mm to 13 mm) 2
1-5/8" to 1/2" (41 mm to 13 mm) 2
1-1/4" to 1/2" (32 mm to 13 mm) 2
7/8" to 1/2" (22 mm to 13 mm) 4
1/2" to 1/2" (13 mm to 13 mm) 12
7/8" to antenna, amplier, device (22 mm to 13 mm) 12
1/2" to antenna, amplier, device (13 mm to 13 mm) 12
Installation Tips
d
When applied, the tape must be above 32F (0C) to ensure adhe-
sion. Keep tape warm by carrying in coat pockets.
d
Do not stretch the tape. Apply only enough tension to provide a
smooth wrap.
d
Smooth each wrapped layer with your hands to ensure
full adhesion.
d
Do not pull the tape to tear tapealways cut it. (Pulled tape eventu-
ally unravels, decreasing protection.)
d
Add extra final layers of tape in warmer climates where there will be
long exposure to damaging ultra violet (UV) rays. Two or three extra
layers of tape will provide additional UV protection.
d
When wrapping tape, overlap the tape to half-width.
d
Ensure vent or drain holes at the bottom of the antenna or device are
not covered with weatherproofing tape.
Andrew 221213 Weatherproofing Kit contains:
2 rolls of 3/4 in x 66 ft black plastic tape
1 roll of 2 in x 20 ft black plastic tape
6 rolls of 2-1/2 in x 24 in butyl rubber tape
Colored Electrical Marking Tape
Colored tape is a convenient way to mark and code cable runs.
Six different colors are available in 3/4 in x 66 in rolls. Sold in
individual rolls.
CM-TB Blue, 3/4" x 66' (19.1 mm x 20.1 m)
CM-TBR Brown, 3/4" x 66' (19.1 mm x 20.1 m)
CM-TG Green, 3/4" x 66' (19.1 mm x 20.1 m)
CM-TR Red, 3/4" x 66' (19.1 mm x 20.1 m)
CM-TW White, 3/4" x 66' (19.1 mm x 20.1 m)
CM-TY Yellow, 3/4" x 66' (19.1 mm x 20.1 m)
Standard Weatherproofing Tape
221213 Complete kit, black
221213-S Complete kit, slate gray
42615-10 2-1/2" x 24" butyl rubber roll
9905-41 3/4" x 66' black plastic tape roll
9905-71 2" x 20' black plastic tape roll
Cable Entry
Multiple Entrance Wall/Roof Feed-Thru Plate
Plate with one or more 4 or 5-inch holes. Weatherproof sealing caps
included. Use with the corresponding size rubber cable boot (sold sepa-
rately).
Part Number Number Height, Width
of Openings in (mm) in (mm)
4 in (102 mm) Entry Opening, Multiple Entrance Plate
204673-1 1 7.0 (178.0) 7 (178)
204673-2 1 5.0 (127.0) 5(127)
204673-2A 3 9.5 (241.3) 20 (508)
204673-4 4 9.5 (241.3) 25.5 (648)
204673-6 6 17.5 (444.0) 23 (584)
204673-8 8 17.5 (444.0) 25.5 (648)
204673-9 9 23.0 (584.0) 23.0 (584)
204673-10 10 9.5 (241.3) 31.0 (787)
204673-12 12 25.5 (648.0) 25.5 (648)
204673-16 16 25.5 (648.0) 25.5 (648
204673-18 18 25.5 (648.0) 39.5 (1003)
204673-20 20 28.8 (731.0) 31.0 (787)
204673-24 24 31.0 (787.0) 39.5 (1003)
Hole Plugs
PLUG-12 Plug, 1/2", for unused cable boot holes, kit of 5
PLUG-78 Plug, 7/8", for unused cable boot holes, kit of 5
PLUG-114 Plug, 1-1/4", for unused cable boot holes, kit of 5
PLUG-158 Plug, 1-5/8", for unused cable boot holes, kit of 5
Standard Cable Entry Boots
Use with feed-thru plate with the corresponding size entry hole.
Cable Boot Cable Number of
Part Number Size Holes in Boots
4 in (102 mm) Cable Boots
204679A-17 1/4" foam 3
204679A-19 3/8" foam 1
204679A-5 1/2" foam 1
204679A-7 1/2" foam 3
204679A-6 1/2" air 1
204679A-1 1/2" air 3
204679A-16 1/2" 4
204679A-13 5/8" 1
204679A-14 5/8" 3
204679A-2 7/8" 1
204679A-18 7/8" 2
204679A-15 7/8" 3
204679A-3 1-1/4" 1
204679A-4 1-5/8" 1
204679A-8 2-1/4" 1
204679A-9 3" 1
CAP-4 Blank cap 0
5 in (127 mm) Cable Boots
48939A-16 3/8" foam 3
48939A-6 1/2" foam 1
48939A-8 1/2" foam 3
48939A-7 1/2" air 1
48939A-5 1/2" air 3
48939A-17 1/2" 4
48939A-14 5/8" 1
48939A-15 5/8" 3
48939A-1 7/8" 1
48939A-2 7/8" 3
48939A-3 1-1/4" 1
48939A-4 1-5/8" 1
48939A-9 2-1/4" 1
48939A-10 3" 1
EP-CAP5 Blank cap 0
Single Entrance Wall/Roof Feed-Thru Assembly
Includes rubber boot, clamp, and aluminum plate.
Order from table.
Part Number Cable Size
SCE-12 1/2"
SCE-58 5/8"
SCE-78 7/8"
SCE-114 1-1/4"
SCE-158 1-5/8"
SCE-214 2-1/4"
ArrestorPort
II
Integrated Transmission Line Entry/Ground System
The ArrestorPort II integrated building entry/ground system
redefines the way you achieve cable shelter entry and grounding.
Traditional installations rely on a piecemeal approach that steals time
and increases costs. ArrestorPort II unifies the installation of entry ports,
Arrestor Plus
surge protectors, and transmission line grounding into an

integrated entry/ground system. Arrestor Plus surge arrestors cut costs,
save valuable interior space, and protect your revenues and personnel
from the damaging effects
of lightning strikes.
The ArrestorPort II integrated wall entry/grounding system kit consists
of an entry panel and a 1/8 in solid copper ground bar assembly with
assembly hardware, weather stripping, and weatherproof sealing caps
for all entry ports. Use with Arrestor Plus surge arrestors (pages 37 and
38, order separately) and standard cable boots (page 22 and 23, order
separately).
APORT-13-4 Provides mounting positions for 13 bulkhead mount
surge arrestors and includes four 4" holes for
waveguide entry
Cable Entry
Elliptical WaveguideStandard Cable Entry
Wall and Roof Feed-Thru and Boots
A Single entrance wall/roof feed-thru assembly. Includes rubber boot,
clamp, and galvanized steel plate. Order from table below.
B Single entrance wall/roof feed-thru assembly for EW37EW240.
Includes rubber boot, clamps, and aluminum plate.
C Waveguide boot for use with 204673 and 48940 series multiple
entrance wall/roof feed-thru plates. Boot diameter of 4 in or 5 in
(102 or 127 mm) is available to match plate. Order individually from
table below.
A, B Single Entrance Wall/Roof Feed-Thru Assemblies
Single Entrance
For Waveguide Photo
Size Reference Part Number
EW17 A 35849A-10
EW20 A 35849A-9
EW28 A 35849A-13
EW37 B 245314-37
EW43 B 245314-43
EW52 B 245314-52
EW63 B 245314-63
EW64 B 245314-64
EW77 B 245314-77
EW85 B 245314-85
EW90 B 245314-90
EW127A B 245314-127A
EW132 B 245314-132
EW180 B 245314-180
EW220 B 245314-220
EW240 B 245314-240
C
B
C
A
B A C
C Waveguide Boots
Part Number by Diameter
For Waveguide Size 4 in (102 mm) 5 in (127 mm)
EW17
EW20
EW28
EW37 WGB4-37 WGB5-37
EW127A WGB4-127 WGB5-122
EW132 WGB4-132 WGB5-132
EW180 WGB4-180 WGB5-180
EW220 WGB4-220 WGB5-220
EW240 WGB4-240 WGB5-240
Installation Aids
EASIAX
2 Cable Preparation Tools

Improve system performance and cut installation time with special-
ized EASIAX 2 cable preparation tools. Wireless installation specialists
require tools that provide precision and consistency when attaching
connectors. The tools provide a clean cut of the coaxial cable and
eliminate copper shavings. This lessens the potential for high VSWR
and IMD readings. EASIAX 2 tools also reduce the time spent preparing
cable for connector attachment by 40%, compared to using common
tools.
CPTV2-158 Cable preparation tool for use with AL, AVA, VXL, and
LDF 1-5/8" cable
CPTV2-114 Cable preparation tool for use with VXL and
LDF 1-1/4" cable
CPTV2-BK Replacement blade kit for CPTV2 tools
EASIAX Replacement Blades
Tool Replacement Blade Kit
CPT-L1 CPT-BKS1
CPT-F4 CPT-BK
CPT-L4ARC1 CPT-BKS1
CPT-E2L2DIN CPT-BKS1
CPT-E2L2N CPT-BKS1
CPT-L45RC CPT-BKS1
CPTL6 CPT-BK6
CPT-158U CPT-BK7
CPT-78U CPT-BK5
Recommended drill size for tools for 1/4 in through 1/2 in cables is 3/8 in torque value with
12 volt minimum. Cordless drill 14.4 minimum voltage,400650 RPM.
Recommended drill size for tools for 7/8 in through 1-5/8 in cable is 1/2 in. Cordless drill
15.4 minimum voltage, 400650 RPM.
For detailed information on cable preparation, see Special Publication SP50262.
Better Connections Yield
Superior System Performance
The connector interface is one of the most critical factors affecting
transmission line operation. Even experienced technicians find the
job more difficult when equipped with makeshift devices or an inad-
equate array of simple hand tools, and it only takes a single faulty
connection to degrade performance and threaten your operations
revenues.
EASIAX
Plus Automated Cable Preparation Tool

For Reliable Cable Preparation in 10 Seconds
Cable installers and system designers can dramatically reduce cable
preparation time and expense while improving overall system perfor-
mance with the EASIAX Plus automated cable preparation tool. Fit
the EASIAX Plus tool to any standard power drill, and it removes the
cable jacket, outer conductor, and foam, then cuts back and chamfers
the inner conductor to the correct dimensions for connector attach-
mentall in less than 15 seconds. The EASIAX Plus automated method
of cable preparation means cable connections that are more consistent,
more reliable, and
more repeatable.
Tool Part Number Cable Type Connector Type
CPT-L1 LDF1-50 Standard connectors
CPT-E2L2N EFX2-50 Type N connectors
CPT-E2L2DIN EFX2-50 7-16 DIN connectors
CPT-E2L2N LDF2-50 Type N connectors
CPT-E2L2DIN LDF2-50 7-16 DIN connectors
CPT-F4 FSJ4-50B FSJ4 version two connectors
CPT-L4ARC1 LDF4-50 7-16 DIN or Type N standard, RingFlare,
HL4RP-50 OnePiece, or Positive Stop connectors
CPT-L45RC LDF4.5-50 RingFlare connectors
CPT-78U LDF5-50A 7-16 DIN or Type N standard, RingFlare,
AVA5-50 OnePiece, or Positive Stop connectors
VXL5-50
AL5-50
CPTL6 LDF6-50 7-16 DIN or Type N standard, RingFlare,
OnePiece, or Positive Stop connectors
CPT-158U LDF7-50 7-16 DIN or Type N standard, RingFlare,
AVA7-50 OnePiece, or Positive Stop connectors
VXL7-50
AL7-50
Installation Aids
Cable Types Cutting Tool Replacement Blades
Part Number Description Part Number, kit of 5
FSJ1, FSJ4, ETS1, RXL1* Series MCPT-1412 Cuts jacketing and outer conductor 209874
FSJ2, FSJ4,ETS2 Series MCPT-3812 Cuts jacketing and outer conductor 209874
LDF4, HL4RP-50A, RXL4** Series MCPT-L4 Cuts outer conductor and scores jacketing MCPT-BK4
LDF5, VXL5, AVA5, RXL5, AL5-50 Series MCPT-78 Cuts outer conductor and inner conductor MCPT-BK5
and scores jacketing
AVA5 A5MCPT-78 Cuts outer conductor and inner conductor A5MCPT-BK5
and scores jacketing

* Except RXL1-1RNT
** Except RXL4-(1, 2 or 3) RNT
EASIAX
Cable Preparation Tool

For Fast, Precision Cuts in 15 Seconds
Its Accurate
Cuts precisely at crest of copper corrugation at the exact distance
required for easy connector attachment. Clean cut makes flaring
easier than ever. Precise blade depth makes it impossible to cut
inner conductor.
Its Consistent
Every cut by every technician on every interface of any cable
will be exactly the same. Its one more way to ensure consistent
electrical performance for your cable system. EASIAX
precision
cutting tool is the only cutting tool made exclusively for HELIAX

coaxial cable.
Remove 2
of jacketing
MCPT-78 Rotation
Installation Aids
Connector Attachment Torque Wrenches
Preset to Andrew Specifications
Andrew torque wrenches attach any type of HELIAX
connectors to
HELIAX LDF4.5, LDF5, LDF6, LDF7, and LDF12 coaxial cables. All are
designed with a mechanism to audibly notify the installer that the proper
torque has been reached and release the pressure.
Part Number Cable Type Connector Type
247696 LDF4-50A OnePiece
245154 LDF4-50A RingFlare
244376 LDF4.5-50 RingFlare and Standard
244378 LDF5-50A, OnePiece, RingFlare,
AVA5-50 and Standard
and VXL5-50
244375 LDF6-50 RingFlare and Standard
247698 LDF6-50 LDF6 OnePiece only
244374 LDF7-50A OnePiece, RingFlare
and Standard
244374 VXL7-50 OnePiece, RingFlare
and Standard
244373 LDF12-50 Standard
244379 All Type N coupling nut
244377 All 7-16 DIN coupling nut
247696 LDF4-50 OnePiece
Crimping Tool
Used to attach crimp-on lugs for standard and SureGround series.
Not required for kits having factory-attached lugs.
Part Number
207270
Aluminum Grounding Kit Tool
Now installers can prepare transmission line cable for grounding
kit installation in one simple, precise stepand without using a
knife! The Andrew aluminum grounding kit preparation tool takes
just seconds to use: simply snap the tool in place around the
cable and rotate. In one step the tool removes the exact amount of
jacketing necessary to attach the grounding strap. The grounding
kit preparation tool is a manually operated cutting device that
quickly trims away a section of cable jacket for the purpose of
grounding strap installation. The tool is ideal for use on cables
mounted close to structures and other cable runs, and will not
scrape or damage the cables outer conductor.
Part Number Cable Type Grounding Kit Type
GKT-F4A FSJ4 Standard
GKT-L4A LDF4 Standard, CSGL, SGL,
and SGPL series
GKT-78A LDF5, VXL5, AVA5, AL5 Standard, CSGL, SGL,
and SGPL series
GKT-114A LDF6 Standard, CSGL, SGL,
and SGPL series
GKT-158A LDF7, VXL7, AVA5, AL7 Standard, CSGL, SGL,
and SGPL series
Part Number Replacement Blade Kit
GKT-F4A GKT-BKF4
GKT-L4A GKT-BK512
GKT-78A GKT-BK512
GKT-114A GKT-BK67
GKT-158A GKT-BK67
Installation Aids
Description
Complete tool box kit includes all individual tools marked
with an asterisk in the list below.
Manual cable preparation tool for 1/4" FSJ1-50 cable
Cut-off tool 7/32"
Cut-off tool 8/32"
Cut-off tool 9/32"
Manual cable preparation tool for 3/8" FSJ2-50 cable
Cut-off tool 7/32"
Cut-off tool 8/32"
Cut-off tool 9/32"
Automated/manual cable preparation tool for 1/2" coaxial
superexible cable
Manual cable preparation tool for 1/2" superexible
FSJ4-50B cable
Chamfer tool
Cut-off tool 7/32"
Cut-off tool 8/32"
Cut-off tool 9/32"
Automated/manual cable preparation tool for
1/2" coaxial cable
21 mm torque wrench for L4 OnePiece connectors
3/4" torque wrench for L4 RingFlare connectors
Manual cable preparation tool for 1/2" LDF4-50A cable
Aluminum grounding kit stripping tool for LDF4 cable
Replacement blade kit for grounding kit stripping tool for
LDF4 cable
Manual cable preparation tool for 7/8" cable
Automated cable preparation tool for 7/8" cable
1-1/4" torque wrench for 7/8" connectors
1 -3/8" open end wrench for OnePiece
7/8" connectors, ts body of Positive Stop connectors
1-1/4" open end wrench for 7/8" connectors, ts
clamping nut of Positive Stop connectors
Aluminum grounding kit stripping tool for 7/8" cable
Replacement blade kit for plastic grounding kit stripping
tool for 7/8" cable
Tool Part Number
TB-COMP-KIT
*MCPT-1412
224361
224362
244494
MCPT-3812
224361
224362
244494
CPT-F4
MCPT-1412
241953
224361
224362
244394
CPT-L4ARC1
247696
245154
MCPT-L4
GKT-L4A
GKT-BK512
*MCPT-78
CPT-78U
244378
245516
244459-5

GKT-78A
GKT-BK512
Cable Size
General Purpose
1/4"
3/8"
1/2" F4
F4 and L4
1/2" L4
7/8"
Attachment Tool Kits
Easier Connections
The connector interface is one of the most critical
factors affecting transmission line operation. Even
experienced technicians can have a hard time when
equipped with makeshift devices or an inadequate
array of simple hand tools, and it only takes a single
faulty connection to degrade performance and
threaten your operations revenues.
Selection
The table is designed to help you select the right
tools for each cable size. Under each cable size you
will find a list of part numbers for the appropriate
cable preparation tools, cable conditioning tools,
spanner and torque wrenches, and grounding kit
preparation tools.
Youll have the option of selecting a manual or
automated cable preparation tool. Under the indi-
vidual tools you will find the torque wrenches for the
connector interface nuts.
*This tool is included in the complete tool kit box, TB-COMP-KIT.
Installation Aids
Description
Manual cable preparation tool for 1-1/4" cable
Replacement blade for CPTV2-114
Automated cable preparation tool for 1-1/4" LDF6 cable
1-7/8" torque wrench 1-1/4" standard or RingFlare connectors
1-3/4" torque wrench for 1-1/4" OnePiece connectors
Aluminum grounding kit stripping tool for 1-1/4" cable
Replacement blade kit for grounding kit stripping tool for 1-1/4" cable
1-7/8" open end wrench
Manual cable preparation tool for 1-5/8" cable
Replacement blade for CPTV2-158
Automated cable preparation tool for 1-5/8" cable
2-1/4" torque wrench for 1-5/8" connectors
2-1/4" open end wrench for 1-5/8" connectors
Aluminum grounding kit stripping tool for 1-5/8" cable
Replacement blade kit for grounding kit stripping tool for 1-5/8" cable
Type N coupling nut torque wrench
7-16 DIN coupling nut torque wrench
Safety knife
Ruler
Grease brush
Point le
Pin alignment tool
Cable are tool LDF4
Cable are tool LDF5
Cable are tool LDF6
Pin depth gauge, Type N male
Pin depth gauge, Type N female
Pin depth gauge, 716 DIN male
Pin depth gauge, 716 DIN female
Tool Part Number
CPTV2-114
CPTV2-BK
CPTL6
244375
247698
GKT-114A
GKT-BK67
244459-6
CPTV2-158
CPTV2-BK
CPT-158U
244374
244459-7
GKT-158A
GKT-BK67
244379
244377
*224352
*224354
*224355
*224356
*224360
*224363
*224368
*224373
*224380
*224395
*114468
*114469
Cable Size
1-1/4" cable
1-5/8"
Individual Tools
*This tool is included in the complete tool kit box, TB-COMP-KIT.
L
I
G
H
T
N
I
N
G

P
R
O
T
E
C
T
I
O
N
( Grounding Kits
( Grounding Bars
( Surge Arrestors
Grounding Kits
Grounding
Point 1
Grounding Point 4
(Runs longer than 200 ft)
Grounding
Point 2
Grounding
Point 3
Transmission Line Grounding
A well designed system uses grounding kits to provide a bond
between the cable and the tower/earth ground system. One
grounding kit is recommended at tower top, tower bottom, at 200
ft (60 m) intervals (where applicable), and at the entrance to the
equipment shelter. Andrew solid copper grounding kits have passed
United States Air Force lightning simulation tests and meet MIL-STD-
188-124A. The non-braided solid copper construction of all Andrew
grounding kits eliminates corrosion caused by moisture retention and
wicking. A heat shrink tube protects the cable terminal connection.
( Compact SureGround ( SureGround ( Standard
Grounding Kit Selection
Several grounding kit options are available to meet the requirements
of any transmission line grounding application.
d
Compact SureGround grounding kits provide the fastest,
easiest installation with the highest degree of lightning protection.
Their self-sealing design clips and locks onto the cable in less
than a minute.
d
SureGround grounding kits, an industry favorite, offer clip on
attachment with taped weatherproofing.
d
Standard grounding kits provide the best grounding solution for
elliptical waveguide. The copper grounding strap is coiled around
the cable and weatherproofed with tape.
d
Universal grounding kits can be applied to a broad range of coaxial
or elliptical transmission lines.
Grounding Kit Selection Guide
Compact SureGround SureGround Standard Universal
Key Feature Over-molded weatherproof Preformed clip-on strap Wraparound grounding strap Multiple cable size
design for easy, fast installation wraparound grounding strap
Benets Uniform installation compact Requires no tools Fits standard coaxial cable Breakaway design ts
design for bundled installation for installation and elliptical waveguide multiple sizes of coaxial
cable and elliptical waveguide
Installation Time Less than 1 minute About 3 minutes About 6 minutes About 7 minutes
Construction Preformed copper Pre-tensioned copper Copper grounding strap Copper grounding strap
grounding strap grounding clip
Over-molded weatherproof Standard weatherproong Standard weatherproong Standard weatherproong
boot, locking bail
Heavy Duty Ground Lead
Andrew grounding kits use heavy duty 6 gauge ground leads
to maximize performance. The MIL-STD-188-124B compliant copper
ground lead reduces dc resistance. The extremely pliable jacket provides
protection and makes it easy to maneuver the lead into position for
attachment to the down conductor.
d
Solid copper construction for high current handling capability,
compatibility with copper cable outer conductors
d
Meets military standards at commercial prices.
d
Provides certainty of continued operation, tested at an
independent laboratory
Grounding Kits
NEW! Compact SureGround
Grounding Kits
Now wireless communications system installers and designers can
protect their systems from the effects of lightning easier and at lower
cost. The new Compact SureGround grounding kit, available only from
Andrew, is a one-piece grounding assembly with the weatherproofing
molded right into the grounding strap.
Compact SureGround grounding kit features:
Easy attachment
d
Self-locking, self-sealing weatherproof enclosure eliminates
loose hardware and taping
d
Saves up to an hour of installation time per typical nine run site
Sure protection
d
Largest surface contact area in the industry
d
Provides surety of protection against even the most severe
lightning strikes
d
Waterproof to IEC529, IP68
Compact size
d
Clip and lock installation ideal for tight cable bundles
or crowded towers
d
Exclusive universal grounding lug can be fitted to a
one- or two-hole earthing attachment point.
United States Patent: 6,548,762. Other patents pending.
More Information
d
See Compact Sureground ordering information on page 33
d
See the installation video at
www.andrew.com/products/trans_line/heliax/sureground.aspx
Easy Installation
Position Compact SureGround
grounding kit
Clip and lock
to seal
SureGround
Kits
Fast Installation, Complete Protection
Protect your equipment from the effects of lightning with SureGround
grounding kits. Meeting both MIL and IEC standards, the SureGround
self-securing ground strap eliminates the need for attachment tools and
provides protection against lightning strikes in excess of 100 kA. Quality
non-braided solid copper construction prevents moisture retention and
wicking, while a heavy duty 6 gauge, MIL-STD-188-124B compliant
copper ground lead maximizes performance. Installation is fast, easy,
and error-free. Grounding kits include a solid copper strap riveted to
the grounding wire, tower attachment hardware, and a two-part tape
weatherproofing system. Grounding kit versions are available with a tin
plating for compatability with aluminum cables.
United States Patent: 5,850,056.
The Compact SureGround Kit with integrated weatherproong is
the choice for the speediest installation, best t in tight locations,
and long-term protection.
TIP!
TIP!
Completed
Grounding Kits
Connector Grounding Kit for Mounting Rail
CGT12 Connector grounding kit ts all F4 and L4 (except OnePiece)
series connectors
CGT58 Connector grounding kit ts all L4.5 and L5
standard connectors
CGT78 Connector grounding kit ts all L5, V5, A5, OnePiece,
and Positive Stop series connectors
CGT114 Connector grounding kit ts all L6 series connectors
CGT158 Connector grounding kit ts all L7 and V7
series connectors
CGT214 Connector grounding kit ts all L12 series connectors
40 mm x 22 mm x 17 mm
Universal Grounding Lugs
This grounding lug provides you with the option of a one-hole
configuration or two-hole configuration. Just break away the bottom
portion of the lug and this will give you your one-hole lug. This universal
lug will fit common buss bar configurations with two-hole spacings
of 0.750, 0.815, or 1.0 in. Designed to crimp on 6 gauge or 16 mm
2

grounding wire. Included on all grounding kits and available separately.
245529-10 Universal grounding lug, kit of 10
207136-3 Grounding lug hardware kit
Standard Grounding Kits
Easy Installation for System Protection
Standard grounding kits are traditional solutions for lightning protection
and are also well suited for elliptical waveguide installations. One
grounding kit is recommended at the tower top, tower bottom, at 200 ft
(60 m) intervals, and at the entrance to the equipment shelter. Standard
grounding kits (204989 and 241088 series) require few steps to install
and include easy-to-follow instructions. Proper tensioning is ensured
by an expansion section that provides visual indication that the strap is
secured.
Series 204989 and 241088 kits include a solid copper strap riveted
to the grounding wire, coiling tool for proper tightening, universal
grounding lug, tower attachment hardware, and a two-part tape weath-
erproofing system. Field-attachable, crimp-on grounding lugs require a
crimping tool (not included).
For two bolt grounding
Snap off pre-scored
lug for one hole option
For one bolt grounding
Crimping Tool for SureGround

and Standard Grounding
The crimping tool is used to attach crimp-on lugs for standard and
SureGround series grounding kits. Not required for kits with factory
attached lugs.
207270 Crimping tool, quantity 1
Universal Grounding Kit
UG12158-15B4 1/2"1-5/8" EW180EW63 60" eld attached lug
Grounding Kits
Compact SureGround
24 in 36 in 60 in
Size/Type 600 mm 1 meter 1.5 meters
factory attached lug eld attached lug
1/2" LDF4 black CSGL4-06B2 CSGL4-10B2 CSGL4-15B4
1/2" LDF4 gray CSGL4-06S2 CSGL4-10S2 CSGL4-15S4
7/8" black CSGL5-06B2 CSGL5-10B2 CSGL5-15B4
7/8" gray CSGL5-06S2 CSGL5-10S2 CSGL5-15S4
1-1/4" black CSGL6-06B2 CSGL6-10B2 CSGL6-15B4
1-1/4" gray CSGL6-06S2 CSGL6-10S2 CSGL6-15S4
1-5/8" black CSGL7-06B2 CSGL7-10B2 CSGL7-15B4
1-5/8" gray CSGL7-06S2 CSGL7-10S2 CSGL7-15S4
SureGround
Size/Type 600 mm 1 meter 1.5 meters

1/2" LDF4 black SGL4-06B2 SGL4-10B2 SGL4-15B4
1/2" LDF4 gray SGL4-06S2
5/8" black SGL45-06B2 SGL45-10B2 SGL45-15B4
7/8" black SGL5-06B2 SGL5-10B2 SGL5-15B4
7/8" gray SGL5-06S2
7/8" aluminum cable SGL5-06B2-T SGL5-15B4-T
1-1/4" black SGL6-06B2 SGL6-10B2 SGL6-15B4
1-1/4" gray SGL6-06S2
1-5/8" black SGL7-06B2 SGL7-10B2 SGL7-15B4
1-5/8" gray SGL7-06S2
1-5/8" aluminum cable SGL7-06B2-T SGL7-15B4-T
2-1/4" SGL12-06B2 SGL12-10B2 SGL12-15B4
Standard Grounding Kit
Size/Type 24" in 36" in 60" in
1/4" and 3/8", EW240, EW380 223158-2 223158-3 223158-4
1/2", EW180, EW220 241088-1 241088-6 241545
5/8" and 7/8", EW85, EW90, EW127A, EW132 241088-2 241088-7 220497
1-1/4", EW64, EW77 241088-3 241088-8 241088-60
1-5/8", EW52, EW63 241088-4 241088-9 220498
EW43 204989-10 241088-64 204989-28
2-1/4" and 3", EW28, EW37 241088-5 241088-10 223700-724
4", EW17, EW20 204989-6
Universal Grounding Kit
Size/Type 60"
eld attached lug
1/4"5/8" (Cinta, HELIAX
) GK-SUNV
Universal Connector Grounding Kit
244495 Universal connector grounding kit
Grounding Bars
Ground Buss Bars
Andrew offers a complete range of grounding buss bar sizes and hole
pattern configurations to accommodate just about any application.
Each grounding bar is made from 1/4 in solid copper bar stock and is
available with optional tin plating. Kits come complete with insulators,
stainless steel brackets, adapters, and hardware for mounting to a wall
or tower.
2" Ground Buss Bar Kits
2" x 10" Ground Buss Bar Kits
Bare Copper
UGBKIT-0210 Universal ground buss bar kit, 1/4" x 2" x 10"
(6.4 mm x 50.8 mm x 254.0 mm)
with universal buss bar hardware kit
Tinned Copper
UGBKIT-0210-T Universal tinned ground buss bar kit, 1/4" x 2" x 10"
(6.4 mm x 50.8 mm x 254.0 mm)
Bare Copper
(6.4 mm x 50.8 mm x 304.8 mm)
Tinned Copper
(6.4 mm x 50.8 mm x 304.8 mm)
7/16" x 5/8"
(11.1 mm x 15.9 mm)
7/16"
(11.1 mm)
2" (50.8 mm)
1/2"
(12.7 mm)
3/4"
(19.1 mm)
10"
(254 mm)
7/16"
(11.1 mm)
12"
(304.8 mm)
2"
(50.8 mm)
1/2"
(12.7 mm)
Bare Copper
(6.4 mm x 50.8 mm x 355.6 mm)
Tinned Copper
(6.4 mm x 50.8 mm x 355.6 mm)
2-1/2" Ground Buss Bar Kits
2-1/2" x 12-1/2" Ground Buss Bar Kits
Bare Copper
UGBKIT-2 Universal ground buss bar kit, 1/4" x 2-1/2 x 12-1/2
(6.4 mm x63.5 mm x 317.5 mm)
Tinned Copper
UGBKIT-2T Universal tinned ground buss bar kit,
1/4" x 2-1/2" x 12-1/2"
(6.4 mm x 63.5 mm x 317.5 mm)
13/16"
(20.6 mm)
7/16"
(11.1 mm)
1-1/4" (31.8 mm)
1-3/8"
(34.9 mm)
12-1/2"
(317.5 mm)
1"
(25.4 mm)
1"
(25.4 mm)
2-1/2" (63.5 mm)
7/16"
(11.1 mm)
1/2"
(12.7 mm)
2" (50.8 mm)
14"
(355.6 mm)
3/4" (19.1 mm)
7/16" x 5/8"
(11.1 x 15.9 mm)
( UGBKIT
Grounding Bars
2-1/2" x 19-1/2" Ground Buss Bar Kits
Bare Copper
UGBKIT Universal ground buss bar kit, 1/4" x 2-1/2" x 19-1/2"
(6.4 mm x 63.5 mm x 495.3 mm)
Tinned Copper
UGBKIT-T Universal tinned ground buss bar kit, 1/4" x 2-1/2" x 19-1/2"
(6.4 mm x 63.5 mm x 495.3 mm)
4" Ground Buss Bar Kits
Bare Copper
(6.3 mm x 101.6 mm x 304.8 mm)
Tinned Copper
(6.3 mm x 101.6 mm x 304.8 mm)
7/16"
(11.1 mm)
12"
(304.8 mm)
4" (101.6 mm)
1/2" (12.7 mm) 3/4" (19 mm)
7/16" x 5/8"
(11.1 mm x 15.9 mm)
7/16"
(11.1 mm)
13/16"
(20.6 mm)
2-1/2"
(63.5 mm)
1" (25.4 mm)
1-3/8" (34.9 mm)
19-1/2"
(495.3 mm)
1-1/4" (31.8 mm)
Bare Copper
GBKIT-0414 Universal ground buss bar kit, 1/4" x 4" x 14"
(6.3 mm x 101.6 mm x 355.6 mm)
with universal buss bar hardware kit.
Tinned Copper
(6.3 mm x 101.6 mm x 355.6 mm)
(11.1 mm)
(355.6 mm)
(12.7 mm)
(12.7 mm)
4" (101.6 mm)
1-1/2" (38.1 mm)
(6.4 mm)
(11.1 mm x 15.9 mm)
( UGBKIT-0210
( UGBKIT-0412
Grounding Bars
Bare Copper
(6.3 mm x 101.6 mm x 508.0 mm)
Tinned Copper
(6.3 mm x 101.6 mm x 508.0 mm)
Bare Copper
(6.3 mm x 101.6 mm x 609.6 mm)
Tinned Copper
(6.3 mm x 101.6 mm x 609.6 mm)
7/16" x 5/8"
(11.1 mm x 15.9 mm)
7/16"
(11.1 mm)
4" (101.6 mm)
20"
(508 mm)
3/4"
(19 mm)
1-3/4"
(44.5 mm)
7/16" x 5/8"
(11.1 mm x 15.9 mm)
7/16"
(11.1 mm)
4" (101.6 mm)
20"
(508 mm)
3/4"
(19 mm)
1-3/4"
(44.5 mm)
Universal Arrestor Ground Bar Assembly
This pre-punched solid copper ground bar assembly simplifies mounting
and grounding of surge arrestors inside the building. Instead of relying
on individual wires or field-fabricated trapeze setups, the Andrew
universal arrestor ground bar assembly provides a uniform mounting
and grounding point for surge arrestors and grounding leads. The 1/8
in assembly uses three horizontal members that can be oriented flat
or upright and adjusted vertically as needed to accommodate various
surge arrestor types. Also included is a mounting kit that includes ceiling
brackets, insulators, threaded rod, and hardware.
d
Compatible with standard entry port sizes
d
Height-adjustable bars
d
Solid copper construction
d
Accepts bulkhead or bolt grounded surge arrestors
d
Accommodates one- and two-hole grounding lugs
d
Eliminates need for internal buss bar
UGBA-DIN-36 Three 6-position ground bars punched for oversized
7-16 DIN mount arrestors (APTL and APT series) or
bolt-grounded arrestors
UGBA-36 Three 6-position ground bars punched for most
7-16 DIN, Type N or bolt-grounded arrestors
(Andrew APG and APM series arrestors)
UGBA-DIN-34 Three 4-position ground bars punched for oversized
7-16 DIN mount arrestors (APTL and APT series) or
bolt-grounded arrestors
UGBA-34 Three 4-position ground bars punched for most 7-16
DIN, Type N, or bolt-grounded arrestors (Andrew APG
and APM series arrestors)
Surge Arrestors
T-Series
Dual Band
dc Pass
Dual Band
Replaceable
Gas Tube
dc Block Integrated Bias Tee
T-Series Surge Arrestors
Arrestor Plus
T-series surge arrestors give engineers more flex-

ibility when configuring lightning protection systems. This slim
profile arrestor fits easily inside equipment enclosures, is bi-
directional, and offers true multistrike protection. The arrestor plus
bulkhead mount T-series features universal Type N and 7-16 DIN
interfaces. The dc passing version allows current to travel to the
top of the tower.
Arrestor Plus
Lightning Surge Arrestors

Add the final measure of protection to your equipment from lightning
current traveling down the transmission line with Arrestor Plus surge
arrestors. All designs are completely weatherproof and feature low
return, insertion loss, and low intermodulation. Our wide range of
surge arrestor types and configurations support most applications.
Replaceable Gas Tube
Surge Arrestors
Offering broadband performance from 02200 MHz and excellent elec-
trical characteristics, Arrestor Plus replaceable gas tube surge arrestors
are easy to install, are bidirectional, and feature dc pass capability
through the center conductor to the active tower top electronics. The
units removable cap makes periodic maintenance fast and easy.
452200 MHz, 90 V
APG-BDFDF-090
APG-BDFDM-090
APG-BNFNF-090
APG-BNFNM-090
452200 MHz, 350 V
APG-BDFDF-350
APG-BDFDM-350
APG-BNFNF-350
APG-BNFNM-350
824960 MHz and 17102170 MHz
APT-DFDF-DB
APT-DFDM-DB
APT-BDFDF-DB
APC-BDFDM-DB
APT-BDFDM-DB
APT-NFNF-DB
APT-NFNM-DB
APT-BNFNF-DB
APT-BNFNM-DB
824960 MHz and 17102170 MHz
dc Passing
APTDC-BDFDF-DB
APTDC-BDFDM-DB
APTDC-BNFNM-DB
380520 MHz
APC-BDFDM-450
675825 MHz
APC-BDFDM-700
20002800 MHz
APB-BNFNF-2400
Bias Tee
Andrew bias tees are designed to protect equipment from damaging
transients induced by lightning strikes. This product allows the injec-
tion of dc current to the center conductor of the feeder line, allowing
current to travel to the top of the tower. Bias tees are unidirectional
devices. Ports are clearly marked to show mounting direction with either
Antenna or Radio.
824960 MHz and 17102170 MHz
ABT-DFDM-ADBH
ABT-DFDM-DB
ABT-DMDF-ADBH
ABT-DMDF-DB
ABT-NFNM-DB
ABT-NMNF-DB
dc Block
The dc block is designed to block dc signals from passing through the
center conductor of a coaxial transmission line. The dc block is a bidi-
rectional RF device. Either RF port may be connected to the equipment
side or the antenna side of the transmission line interface to provide
equivalent protection.
824960 MHz and 17102170 MHz
ADCB-DFDM-DB
Integrated Surge Arrestor/Connector
The Arrestor Plus
integrated, T-series lightning surge arrestor is a one-

piece surge arrestor/HELIAX
connector. It uniquely combines the reli-

ability of quarterwave shorting stub technology with the proven perfor-
mance of HELIAX connectors to deliver premium lightning protection in a
single component.
824960 MHz and 17102170 MHz
APTA5DC-BDF-DB
APTA7DC-BDF-DB
Surge Arrestor Accessories
GASTUBE-090 90 volt gas tube replacement, kit of 10
GASTUBE-350 350 volt gas tube replacement, kit of 10
243951 90 degree mounting/grounding bracket, Type N
243950 90 degree mounting/grounding bracket, 716 DIN
244847 Integrated surge arrestor/connector 90 degree
mounting/grounding bracket, 716 DIN
DF-CAPKIT Plated port sealing cap, 716 DIN (Fits onto DIN female
connector), IP 66 and 68
Surge Arrestors
A
P
P
E
N
D
I
X
E
S
Appendix 1
Quarterwave Stub Surge Arrestors
Quarterwave Stub Surge ArrestorsConsiderations
and Selection
Quarterwave Stub (QWS) Surge Arrestor Technology
An understanding of the key concepts of quarterwave stub tech-
nology and its relationship to lightning transients can be of great
benefit to transmission line system designers and operators. With
this understanding, system designers and operators can more fully
utilize lightning protection systems that use QWS technology as
well as understand the critical role multistrike ability plays in light-
ning protection systems.
Arrestor Plus
T-series surge arrestors from Andrew Corporation

employ QWS technology, a unique design that allows microwave
signals to pass unattenuated while shunting the lower frequencies
associated with lightning-induced transients to ground. This proven
QWS technology is utilized in APT Arrestor Plus
Surge Arrestors.
To understand QWS technology, one needs to understand lightning.
The lightning transient is characterized by a current waveform
with an 8-microsecond rise time (time to reach 90% of the peak
value) and a 20-microsecond decay time (time to decay to 50%
of the peak value). Peak currents can reach excessive values, but
50% of all strikes will reach values of only 18 kA. It is important
to remember that this is only a laboratory characterization of the
lightning transient, but it facilitates standardized testing techniques
for the industry. Figure 1 depicts an actual laboratory-generated
8/20 sec waveform that was used to evaluate Andrew surge
arrestors. For more detailed information regarding laboratory
generated surge waveforms, see IEC 60-2, ANSI-IEEE Std 4-1978,
and ANSI C62.1-1984.
The substantial energy associated with lightning transients has
frequency components near dc with components of decreasing
value of energy extending through 160 kHz.
The effectiveness of surge arrestors is characterized by the
throughput energy and the ability to withstand multiple surges.
These characteristics are readily measurable in a laboratory
equipped with the appropriate test equipment. Throughput energy
is a measure of the amount of energy passed through the output
of the device when the input of the device is subjected to a light-
ning transient waveform. The throughput energy can be calculated
from the residual voltage waveform using the relationship:
Figure 2 shows the residual output voltage present when an
APT Series Surge Arrestor was subjected to an actual 8/20 sec
waveform with a peak current of 20 kA. In this case, the residual
voltage was recorded across a 50 ohm load. The resulting
throughput energy was 72 microjoules. The objective of the surge
arrestor is to minimize the throughput energy to a manageable
level. Most microwave transmitters and receivers used in todays
wireless systems are capable of withstanding throughput energy
levels of 10 millijoules or less.
The ability to withstand multiple strikes is also an important
measure of surge arrestor merit. Multistrike ability is measured
by subjecting the QWS surge arrestors to repeated surges and
observing if the arrestors continue to properly function or show
Time (microseconds)
Figure 1
Time (microseconds)
Figure 2
Laboratory generated 8 x 20 sec lightning surge current waveform.
Peak current: 21 kiloamperes
Residual output voltage of an APT quarterwave stub surge arrestor
when subjected to an 8 x 20 sec current surge with peak current
of 20,000 amperes.
Appendix 1
signs of degradation. No evidence of failure or degradation was
observed after subjecting the Andrew Arrestor Plus
surge arres-
tors to over 100 strikes at 50 kA peak current using an 8/20 sec
waveform. This level of reliability is essential in protecting todays
telecommunications systems from the potential of damaging light-
ning transients.
Arrestor Plus QWS surge arrestors are carefully designed and
tested to provide a low impedance path to ground for any lightning
induced transient energy present on the center conductor of the
transmission line. These surge arrestors are designed to withstand
multiple strikes of the most severe surges. The unique attributes
of QWS surge arrestors are made possible by careful design
and selection of the geometry and cross-sectional area of the
conductors that make up the shorting stub. QWS designs result in
extremely low throughput energy devices with true
multistrike ability.
When selecting a surge arrestor, the RF performance must be
considered. Characteristics that describe RF performance are
operating bandwidth, VSWR (return loss), insertion loss, maximum
average power, and passive intermodulation distortion.
The operating bandwidth of quarterwave shorted stubs is limited,
but Andrew Arrestor Plus QWS surge arrestors are designed to
accommodate the operating bandwidth requirements of todays
wireless telecommunications systems. Quarterwave shorted stubs
can be designed to accommodate up to 20% bandwidth. The
bandwidth characteristics of the surge arrestors is similar to that of
a bandpass filter: RF signals at the center of the band pass unat-
tenuated, while out-of-band signals (such as lightning transients)
are diverted harmlessly to ground.
Figure 3 shows the measured wideband S11 (return loss) of a
QWS surge arrestor. Note that in the band of interest, the S11
levels are typically -30 dB.
It is key to note that dc signals cannot be passed through the
device. When dc passing is required, as is often the case for tower
top active electronics, then it is strongly recommended to use
Andrew APG gas tube series surge arrestors. For more information
on APG gas tube series arrestors, see Appendix 2.
The lowest center frequency of operation is limited to approxi-
mately 400 MHz, while the highest center frequency is limited
by the cutoff frequency of the coaxial cable being used. Figure
4 shows a cross-sectional view of a QWS surge arrestor. The
lower operating frequency is limited due to the physical size of
the shorting stub. When the shorting stub reaches too long of a
physical length, the stub appears as an inductive load, resulting
in excessive residual voltages. Quarterwave shorted stubs can be
designed to accommodate systems operating as high as 12 GHz.
Frequency (MHz)
Figure 3
Figure 4
S11 vs Frequency for a QWS surge arrestor
In the operating bandwidth of the Arrestor Plus
QWS surge
arrestors, the RF performance characteristics are optimal. At the
operating frequencies of the Arrestor Plus, the insertion loss is less
than 0.1 dB, no more than adding a connector to the transmission
line path. Figure 5 shows the measured S21 (insertion loss) perfor-
mance of an APM type QWS surge arrestor. Note that in the band
of interest, the S21 levels are better than -0.05 dB.
The maximum average operating power of the Arrestor Plus QWS
surge arrestor is limited by the connector interface. The suggested
maximum average operating power for Type N connectors is 600
watts at 900 MHz. The suggested maximum average operating
power for 7-16 DIN connectors is 3000 watts at 900 MHz.
Exceeding these values can result in excessive temperature rise
and permanent damage to the device.
Intermodulation distortion (IMD) is a major concern in todays PCS,
cellular, ESMR, and other wireless systems. IMD is caused by
nonlinear effects within a device. For connectors, these nonlinear
effects can be caused by poor contact between internal surfaces,
plating with ferrous materials, such as nickel, or by oxide build up
between contact surfaces.
Appendix 1
Arrestor Plus
surge arrestors are designed with high pressure

contacts, premium platings, and are compensated to offer the best
possible IMD performance.
The functionality of Arrestor Plus QWS surge arrestors can be
readily evaluated by using ordinary RF field test equipment. If there
is no degradation of the VSWR or insertion loss of the arrestor,
then the surge arrestor is reassuringly functioning as a transient
lightning protection device. VSWR and insertion loss measurements
can be made by using vector or scalar network analyzers as well
as a variety of other readily available field test equipment. No other
maintenance is required. As obvious as it may seem, surge arres-
tors should never be installed or tested when a storm is occurring
or approaching.
System requirements often dictate outdoor installation of surge
arrestors. Arrestor Plus surge arrestors are ideal for these applica-
tions and designed to withstand the harshest environments and
are extensively tested to meet industry standard specifications for
waterproofing, vibration, thermal cycling, mechanical shock, salt
spray, fungus, and moisture resistance.
QWS surge arrestors are excellent choices for wireless base station
applications where superior RF performance is required to ensure
call quality and when protection against multiple lightning strikes is
of primary importance.
Frequency (MHz)
Figure 5
S21 vs Frequency for a QWS surge arrestor
Appendix 2
Gas Tube Surge Arrestors
Using the Maximum Average Power Derating Curves
GSM Radio Operating Conditions:
1. Number of carriers = 2
2. Power of each carrier (dBm) = +42 dBm carriers at the output
of a hybrid combiner (+45 dBm at combiner input)
3. VSWR = 1.25:1
4. dc Bias = 15 V
5. Nominal Impedance = 50
Gas Tube Surge ArrestorsConsiderations
and Selection
Gas Tube Surge Arrestor Technology
To simplify selecting the appropriate gas tube surge arrestor
for your system plots, maximum average power vs. VSWR have
been compiled. Figures 1 and 2 show plots of maximum average
power vs. VSWR for 90 and 350 volt gas tubes. Each graph shows
different values of commonly used dc bias voltages. These graphs
were established from extensive laboratory testing and include
the appropriate safety factors to ensure proper gas tube selection.
Using these graphs for selecting a gas tube will optimize the level
of protection required for your system.
Gas tube elements are offered in various spark-over voltages.
Andrew Corporation simplifies the selection process by limiting the
choice to two options, 90 volt for GPS applications and 350 volt
for many other wireless applications requiring a dc bias. Plots of
maximum average power vs. VSWR have been compiled for the 90
and 350 volt gas tubes from extensive laboratory testing and have
built-in safety factors to ensure proper selection. See figures 3 and
4. Each graph shows several different values of commonly used
dc bias voltages. Using these graphs for selecting a gas tube will
optimize the level of protection required for your system.
When working in todays environment of diplexed signals, overlaid
networks, tower mounted amplifiers, and multiple carriers, it is
necessary to verify that a systems maximum average power does
not exceed that rating for the gas tube. The following example illus-
trates the process of using the voltage derating curves that follow.
1. Calculate the peak instantaneous voltage of a single
+42 dBm carrier for a 50 ohm based system
Average Power
10
(average power per carrier in dBm/10)
per Carrier (watts)=
1000
V rms per carrier (volts): =
average power per carrier (watts)
Impedance (ohms)
V rms per carrier (volts) = 28.284
V peak per carrier (volts):= 2
V rms per carrier (volts)

V peak per carrier (volts) = 40
Therefore, the peak instantaneous voltage of a single
+42 dBm carrier is 40 volts.
2. Calculate the peak instantaneous voltage of a two,
+42 dBm carrier, 50 ohm based system
Peak instantaneous voltage (volts):=
V peak per carrier (volts)
number of carriers (N)

Peak instantaneous voltage (volts) = 80
Therefore, the peak instantaneous voltage of a two
+42 dBm carriers is 80 volts.
3. Calculate the peak instantaneous power of two,
+42 dBm carrier, 50 ohm based system
Peak instantaneous power (watts):=
(Peak instantaneous voltage (volts))
2
Impedance (ohms)
Peak instantaneous power (watts) = 128
Peak instantaneous power (dBm):=
10

log

Peak instantaneous power (watts)
0.001
Peak instantaneous power (dBm) = 51.072
Therefore, the peak instantaneous voltage of two,
+42 dBm carriers is 128 watts (+51 dBm).
4. The gas tube selection curves are specied as Maximum
Average Power vs. VSWR. Therefore, it is required to
calculate an estimate of the average (RMS) power from
the peak instantaneous power. A reasonable calculation
of this estimate is shown below:
Peak instantaneous voltage (volts) = 80
RMS equivalent (volts): =
Peak instantaneous voltage (volts)

2
RMS equivalent (volts) = 56.569
RMS equal power (watts):=
(RMS equivalent (volts))
2
Impedance (ohms)
RMS equal power (watts) = 64
Therefore, to utilize the gas tube selection curves, an
approximate value of 64 watts average power would
provide a reasonable estimate.
Note that for this calculation, the dc bias voltage was not
specied and the VSWR was not specied. The gas tube
selection curves provide a derating for both the VSWR
and dc bias voltage.
5. Apply calculated information to the derating curves.
Appendix 2
1.25
Vdc bias 15 V
3.25 W
Steps
1. Apply system parameters to 90 V curves.
2. Estimate 15 V dc bias line
3. Find average power level at intersection with 1.25 VSWR
4. Average power = 3.25 W
5. 3.25 W is much less than 64 W therefore 90 V gas tube is not
chosen for this application.
6. Move on to 350 V curve.
Steps
1. Locate maximum average power for system with VSWR = 1.25
and Vdc = 15 V as before.
2. Maximum average power (est.) = 375 W (+55.74 dBm)
3. Estimated average power (from calculation) = 64 W
(+48.06 dBm)
4. Resulting safety margin is 7.68 dB.
5. 350 V gas tube is chosen due to acceptable safety margin.
The APTDC line of dc passing surge arrestors should be used
for those cases where the intersection of VSWR and Maximum
Average Power lie above the 0 volt dc offset curve.
375 W
Vdc bias 15 V
Gas Tube Derating Curves
90 Volt
Figure 3
350 Volt
Figure 4
VSWR
Figure 1
Derating of maximum average power due to VSWR
and applied dc bias for APG Arrestor Plus
surge
arrestors with 90 volt gas tubes
VSWR
Figure 2
surge
surge
surge
Appendix 2
gas tube surge arrestors allow field

replacement of gas tube elements. Gas tubes can be replaced by
simply removing the nut and replacing the element. A gas tube
element may not always show outward signs of failure or degrada-
tion, therefore, routine maintenance and inspection is suggested. If
the number of storms in an area is high, gas tube elements should
be replaced more frequently. Gas tube degradation is dependent
on the number as well as the intensity of the lightning strikes.
As obvious as it may seem, gas tube elements should never be
replaced when a storm is occurring or approaching.
When selecting a surge arrestor, the RF performance must be
considered. Characteristics that describe RF performance are
operating bandwidth, VSWR (return loss), insertion loss, and
maximum average power.
Arrestor Plus gas tube arrestors offer the widest bandwidth
available of any gas tube surge arrestors on the market. Unlike
quarterwave stub arrestors, Andrew APG gas tube arrestors can
be used for applications under 400 MHz. A single unit can be
used for broadband applications over the full frequency range of
02000 MHz. Figure 5 shows the measured wideband S11 return
loss plot of a gas tube surge arrestor. Note that in the commonly
used 800960 MHz and 17002000 MHz bands, the S11 levels
are typically better than -30 dB.
Over the operating frequencies of the Arrestor Plus surge arrestor,
the insertion loss is less than 0.1 dB, no more than adding a
connector to the transmission line path. Figure 6 shows the
measured S21 (insertion loss) performance for a typical APG family
arrestor. Note that in the commonly used 800960 MHz and
17002000 MHz bands, the S21 levels are typically -0.05 dB and
-0.12 dB, respectively.
Unlike QWS arrestors, a gas tube arrestor can pass dc current
along the center conductor, as is often required for todays
wireless communication systems incorporating tower top
active electronics.
VSWR and insertion loss measurement of APG gas tube surge
arrestors can be made by using vector or scalar network analyzers
as well as a variety of other readily available types of field test
equipment. The arrestors are dc passing broadband devices and
can therefore be used with time domain reflect meters or fault
location equipment.
System requirements often dictate that surge arrestors will be
installed outdoors. The Arrestor Plus APG series surge arrestors
from Andrew are ideal for these applications and are designed to
withstand the harshest environment. They are extensively tested to
meet industry standard specifications for waterproofing, vibration,
thermal cycling, mechanical shock, salt spray, fungus, and
moisture resistance.
Andrew Arrestor Plus gas tube surge arrestors are an excellent
choice for broadband frequency applications or when a dc bias is
required for providing power to tower top devices. Please visit our
website at www.andrew.com for more information.
S11 vs Frequency for an APG gas tube surge arrestor
S21 vs Frequency for an APG gas tube surge arrestor
Frequency (MHz)
Figure 5
Appendix 3
dc Passing T-Series Surge Arrestors
dc Passing T-Series Surge Arrestors
dc passing surge arrestors (US patent

pending) are true broadband RF devices that are capable of
allowing a dc bias to pass along the center while shorting the
lower frequencies associated with lightning induced transients
to the outer conductor and to earth ground. By removing the gas
tube from the RF path, they allow dc voltage to pass and greatly
enhance power handling capability.
Arrestor Plus
dc passing wideband surge arrestors are the same

general shape and size as a typical quarterwave surge arrestors.
The arrestor is comprised of two coaxial connector interfaces
joined by a center conductor passing through a coaxial arrestor
body. A shorting stub connects to the center conductor on an
axis perpendicular to the center conductor through a port in the
arrestor body. A gas discharge tube sits directly on top of the RF
shorting stub, under constant pressure applied by the gas tube
spring clip. The shorting stub, RF shorting stub, gas tube, and gas
tube spring clip are sealed inside of the shorting stub sleeve and
arrestor body by compressing an o-ring between the screw-in gas
cap and the shorting stub sleeve.
The function of the various elements in the dc passing T-series
surge arrestor described above are best understood if modeled as
a simple electronic circuit as shown in figure 1, below.
Figure 1
Electronic circuit diagram of
dc-passing wideband surge arrestor
The two coaxial connector interfaces, ports P1 and P2, provide
coupling to coaxial cables that run between the output of the radio
equipment and the surge arrestor and the surge arrestor and the
antenna. This cable is indicated as having a nominal impedance
(Zo) of 50 . The center conductor sections that are between the
coaxial connector interfaces and the shorting stub are modeled as
transmission lines TL1 and TL2. The shorting stub is modeled as
an inductor (L1) that connects to the center conductor between
TL1 and TL2. The outer surface of the RF shorting stub is coated
with a dielectric material to create a series capacitance (C1)
between the end of the helical shorting stub and the shorting
stub sleeve, which is a ground (G1). A gas discharge tube with
capacitance (C2) sits in parallel with capacitor C1 and ground (G2).
The inductance, L1, of the helical shorting stub and the effec-
tive capacitance of parallel capacitors C1 and C2 tune the surge
arrestor giving it a broadband frequency response.
Under normal operating conditions, the RF signal will pass straight
from P1 to P2 since the inductor, L1, appears as an open circuit.
When a dc bias voltage is applied at either P1 or P2, it will also
pass straight through the device. The dc bias voltage is prevented
from shorting to either earth grounds, G1 or G2, by capacitors, C1
and C2, because these capacitors appear as open circuits to low
current dc bias voltages typically applied to power tower mounted
amplifiers or active antennas. The gas in the gas discharge tube
will ionize under lightning strikes or other high voltage conditions
allowing the transient to go from the center conductor to the outer
conductor or ground (G2). For purposes of effective grounding,
the surge arrestor can either be mounted to ground through a
bulkhead interface or by mounting the surge arrestor to a copper
grounding buss bar via threaded mounting hardware that is
provided with the surge arrestor or ordered separately.
Appendix 4
Lightning Strike Probability
Definitions and Comments
Isokeraunic Level: The isokeraunic level is a measure of the
number of thunderstorm days per year. A thunderstorm day is
defined as a day on which thunder is heard. For example, the city
of Chicago averages 41 thunderstorm days per year. The isoke-
raunic level is expressed as:
Ty = Isokeraunic Levels
Total Flash Density: The total flash density is a measure of the
number of flashes per year per square kilometer. For example, the
city of Chicago averages 33 flashes per year per square kilometer.
Total flash density includes intracloud flashes, intercloud flashes, and
cloud-to-ground flashes. Total flash density can be expressed as DT.
The expression for total flash density is an empirically determined
value based on many years of observation and can be approximated
as follows:
P fraction DT 0.02 x Ty
2
Pfraction
Ground Flash Density: The ground flash density is a measure of the
number of flashes that reach the ground (as opposed to intercloud
and intracloud type flashes). Flashes that reach the ground are the
ones that are threatening to us. For example, the city of Chicago aver-
ages 9.9 ground flashes per year per square kilometer. The expres-
sion for ground flash density is an empirically determined value based
on many years of observation and can be expressed as follows:
DGround Flash = Pfraction x DT
is the fraction of total flashes that reach the ground. The value is
related to the latitude as expressed in the following equation:
P fraction = 0.1 x [1 + (
latitude
)
2
]

30
Area of Attraction of a Structure: A structure has a defined attrac-
tion area that is strongly dependent on the height and less depen-
dent on its width and length. For a structure of height H, length L,
and width W, the area of attraction (sometimes referred to as area
of collection) can be estimated by using the following equation. All
units are in meters. Note that if the structure has a small length or
small width as compared to the height, such as a communications
tower or pole, then the equation is dominated by the height.
AreaC = L W = 4.4 H (L + W) + (2.2 H)
2
Average Number of Strikes per Year to a Tower: The average
number of strikes per year for an arbitrary tower of height H, length L
and width W, can be estimated by multiplying the Area of Attraction,
Area C, by the Ground Flash Density, D Ground Flash. Since the Area of
Attraction, is expressed in square meters and the Ground Flash Density
is expressed in square kilometers, a factor of 10-6 must be included.
S Area
c
x DGround Flash x H
2
x 10
-6
Strikes per Year, 50 foot tower: As an example, a 50-foot tower
in the Chicago area will average 0.040 strikes per year (or this can
be interpreted as 1 strike every 24.6 years). The calculations were
based on a 50-foot (15.24 meters) height, 3.5-meter width, 3.5-
meter length, latitude of 42 degrees, and an isokeraunic level of
41 thunderstorm days per year.
Strikes per Year, 100 foot tower: As an example, a 100-foot
tower in the Chicago area will average 0.153 strikes per year (or
this can be interpreted as 1 strike every 6.5 years). The calcula-
tions were based on a 100-foot (30.48 meters) height, 3.5-meter
width, 3.5-meter length, latitude of 42 degrees, and an isokeraunic
level of 41 thunderstorm days per year.
Strikes per Year, 200 foot tower: As an example, a 200-foot
tower in the Chicago area will average 0.591 strikes per year (or
this can be interpreted as 1 strike every 1.7 years). The calcula-
tions were based on a 200-foot (60.96 meters) height, 3.5-meter
width, 3.5-meter length, latitude of 42 degrees, and an isokeraunic
level of 41 thunderstorm days per year.
It is important to remember that these are statistical calculations based
on many years of observation. When lightning strikes within even a
few kilometers of the tower, damaging transients can be coupled and
carried on any transmission lines, data lines, and power lines in the
vicinity and cause damaging effects within the area of the tower.
References
1 IEC 1312-1, Protection Against Lightning Electromagnetic Impulse
2 IEEE C62.41-1991, IEEE Recommended Practice on Surge Voltages in Low-Voltage ac Power Circuits
3 MIL-STD-188-124A, Military Standard for Grounding, Bonding and Shielding
4 MIL-HDBK-419A, Military Handbook for the Theory of Grounding, Bonding and Shielding of
Communications Electronics. Volume 1 (Basic Theory), Volume 2 (Applications)
5 MIL-STD-1757A, Lightning Qualification Test Techniques for Aerospace Vehicles and Hardware
6 National Electric Code 1993, Article 280
7 IEC 1024-1, Protection of Structures Against Lightning.
8 BS 6651, 1992 Code of Practice for Protection of Structures Against Lightning
9 Aleksa, J. and Stockman, C., A Flash of Beauty or a Force for Destruction?, South African
Wireless Communications, Aug 1997
10 Fisher, F.A. and Plumer, J.A., Lightning Protection of Aircraft, Lightning Technologies, 1990
Lightning StrikesStatistics and Definitions
Statistics on the probability of a lightning strike to towers of various heights in various locations on Earth
Isokeraunic Flash Ground Strikes per Year:
Location Level Latitude Density Flash Density 50-foot tower 100-foot tower 200-foot tower
Chicago, IL 41 42 33.60 9.95 0.041 0.153 0.591
Arlington, TX 48 33 46.10 9.85 0.040 0.151 0.585
Atlanta, GA 50 34 50.00 11.30 0.046 0.173 0.671
Tampa, FL 100 28 200.00 35.00 0.143 0.537 2.081
York, UK 9 53 1.62 0.67 0.003 0.010 0.039
Taiwan 20 23 8.00 1.27 0.005 0.019 0.075
Hong Kong 30 23 18.00 2.85 0.012 0.043 0.170
Singapore 140 2 392.00 39.30 0.160 0.604 2.340
Rio de Janeiro 60 23 72.00 11.40 0.046 0.175 0.679
Appendix 5
Additional Documents
Andrew Accessory Products Information
Cable Hoisting and Attachment Bulletin Number
Support/Hoisting Grips for HELIAX
Cables 237409
Click-On Hangers 237397
Standard Hanger Kits 37378
Type 31766A Hanger Kits 17783
Hanger Kits 37321
Hoisting Grip and Cable Support Hangers SP30-45
Compact Angle Adapters 10140
Angle Adaptors (types 31768A, 243684, 243684-M) 237363
Hanger Spacing Guidelines TP-101619.1-EN
SnapStak Adapter for 3/8" Control Cable TP-100940-EN
Cable Tie 40417 TP-101085-EN
Hoisting Grip for 1/4" Data Cables 7540680
SnapStak Installation 237637

Tools
HELIAX
Connector Tool Kit 237274

Wrench Kits 10234
Securing Coaxial Cable in a Monopole 10236
Andrew Installation Tools PA-100414.2-EN
Weatherproong
3M Cold Shrink Weatherproofing Kits 237272
3M Cold Shrink Weatherproofing Kits 237426
Application Details for 3M Cold Shrink Kits SP50030
Connector/Splice Weatherproofing Kit 237133
WeatherShield Enclosures PA-100428.4-EN
WeatherShield Installation, Main Feeder Antenna 750141
WeatherShield Installation, Antenna 237914
Technical Specifications for WeatherShield TP-100257.2-EN

Cable Entry
Cabinet Feed-Thru Plates for 1/2" through 1-5/8" 237362
Types 204673 and 48940 Wall/Roof Feed Thru Plates 237060
Single Entrance Wall/Roof Feed-Thru Kits 37007
ArrestorPort II Entry/Ground System 237516

Universal Grounding Bar 237440
Universal Ground Bar Assembly 237513
SureGround Installation 237549
Standard Grounding Kits 237549
Connector Grounding Kit 237701
Compact SureGround Kit PA-101089-EN
Compact SureGround Testing Performance SP50365-A
Compact SureGround Installation Instruction 7513851
The table below lists Andrew publications for the products mentioned in this guide.
They are available at www.andrew.com.
Appendix 6
Hanger Spacing Guidelines
Standard HangerMaximum Hanger Spacing
Cable Size Cable Type Hanger Part Number Recommended Maximum Hanger Spacing, feet (meters)
Wind Speed 85 mph (137 km/h) 100 mph (160 km/h)
Radial Ice No Ice 1/2" (13 mm) 1" (25 mm) No Ice 1/2" (13 mm) 1" (25 mm)
1/2" LDF4-50A 43211A 5 (1.5) 4 (1.2) 3 (0.9) 5 (1.5) 4 (1.2) 3 (0.9)
1/2" LDF4-75A 43211A 5 (1.5) 4 (1.2) 3 (0.9) 5 (1.5) 4 (1.2) 3 (0.9)
1/2" HL4RP-50 43211A 5 (1.5) 4 (1.2) 3 (0.9) 5 (1.5) 4 (1.2) 3 (0.9)
1/2" HJ4-50 43211A 5 (1.5) 4 (1.2) 3 (0.9) 5 (1.5) 4 (1.2) 3 (0.9)
1/2" HLT4-50 43211A 5 (1.5) 4 (1.2) 3 (0.9) 5 (1.5) 3 (0.9) 2 (0.6)
1/2" HT4-50 43211A 5 (1.5) 4 (1.2) 3 (0.9) 5 (1.5) 4 (1.2) 3 (0.9)
1/2" HST4-50 43211A 5 (1.5) 3 (0.9) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
1/2" HS4RP-50 43211A 5 (1.5) 3 (0.9) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
1/2" FSJ4-50B 43211A 5 (1.5) 3 (0.9) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
1/2" FSJ4-75A 43211A 5 (1.5) 3 (0.9) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
5/8" LDF4.5-50 42396A-9 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2)
5/8" HJ4.5-50 42396A-9 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2)
7/8" AVA5-50 42396A-5 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2)
7/8" LDF5-50A 42396A-5 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2)
7/8" AL5-50 42396A-5 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2)
7/8" HJ5-50 42396A-5 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2)
7/8" HJ5-75 42396A-5 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2)
7/8" HT5-50 42396A-5 5 (1.5) 5 (1.5) 4 (1.2) 5 (1.5) 5 (1.5) 4 (1.2)
1-1/4" LDF6-50 42396A-1 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9)
1-5/8" AVA7-50 42396A-2 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9)
1-5/8" LDF7-50A 42396A-2 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9)
1-5/8" AL7-50 42396A-2 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9)
1-5/8" HJ7-50A 42396A-2 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9)
Definitions and Assumptions 1. Per EIA-222 Standard: Coefficient of drag for coaxial cable is 1.2 (cylindrical members). Ice forms completely around member (360 degrees).
Combined wind and ice loading is reduced by 25% to reflect lower probability of wind and ice occurring simultaneously. 2. Wind speeds are maximum, which includes gust factors
and exposure factors. Note: Standard tower configuration spacing is 3 to 4 ft.
HELIAX
Coaxial Cable
Recommended maximum hanger spacings are tabulated below for
various wind speed and ice conditions. The recommendations are based
on guidelines stated in EIA Standard RS-222 and new wind tunnel and
vibration tests. They supersede those in previous Andrew catalogs.
Please refer to Andrew publication number TP-101619-EN available at
www.andrew.com for the most current recommendations.
These spacing recommendations assume that all hangers are properly
installed and tightened.
Installations in Typical Climates
Use the 125 mph (200 km/h), 1/2 in ice conditions, highlighted in red.
Severe or Mild Climates
Use the wind speed and ice conditions that most closely approximate the
expected worst case conditions for the local climate.
Appendix 6
Standard HangerMaximum Hanger Spacing
Cable Size Cable Part Number Hanger Part Number Recommended Maximum Hanger Spacing, feet (meters)
2-1/4" LDF12-50A 42395A-4 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9)
2-1/4" HJ12-50 42396A-4 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9)
3" HJ8-50B 31766A-11 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5)
4" HJ11-50B 31766A-10 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5)
5" HJ9HP-50 33598-5 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5)
5" HJ9-50 33598-5 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5)
Radial Ice
1/2" LDF4-50A 43211A 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" LDF4-75A 43211A 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" HL4RP-50 43211A 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" HJ4-50 43211A 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" HLT4-50 43211A 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" HT4-50 43211A 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" HST4-50 43211A 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" HS4RP-50 43211A 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" FSJ4-50B 43211A 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" FSJ4-75A 43211A 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
5/8" LDF4.5-50 42396A-9 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 3 (0.9)
5/8" HJ4.5-50 42396A-9 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 3 (0.9)
7/8" AVA5-50 42396A-5 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
7/8" LDF5-50A 42396A-5 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
7/8" AL5-50 42396A-5 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
7/8" HJ5-50 42396A-5 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
7/8" HJ5-75 42396A-5 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
7/8" HT5-50 42396A-5 5 (1.5) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
1-1/4" LDF6-50 42396A-1 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9)
1-5/8" AVA7-50 42396A-2 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
1-5/8" LDF7-50A 42396A-2 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
1-5/8" AL7-50 42396A-2 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
1-5/8" HJ7-50A 42396A-2 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
2-1/4" LDF12-50 42395A-4 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9)
2-1/4" HJ12-50 42396A-4 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9)
3" HJ8-50B 31766A-11 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5)
4" HJ11-50B 31766A-10 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5)
5" HJ9HP-50 33598-5 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5)
5" HJ9-50 33598-5 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5)
No Ice 1/2" (13 mm) 1" (25 mm) No Ice 1/2" (13 mm) 1" (25 mm)
Note: Standard tower configuration spacing is 3 to 4 ft.
Appendix 6
Snap-In HangerRecommended Maximum Hanger Spacing
1/2" LDF4-50A SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
1/2" LDF4-75A SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
1/2" HL4RP-50 SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
1/2" HJ4-50 SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
1/2" HLT4-50 SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
1/2" HT4-50 SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
1/2" HST4-50 SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
1/2" HS4RP-50 SSH-12 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
1/2" FSJ4-50B SSH-12 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 2 (0.6)
1/2" FSJ4-75A SSH-12 4 (1.2) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 2 (0.6)
5/8" LDF4.5-50 206706A-6 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
5/8" HJ4.5-50 206706A-6 4 (1.2) 4 (1.2) 3 (0.9) 4 (1.2) 3 (0.9) 2 (0.6)
7/8" AVA5-50 SSH-78 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
7/8" LDF5-50A SSH-78 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
7/8" AL5-50 SSH-78 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
7/8" HJ5-50 SSH-78 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
7/8" HJ5-75 SSH-78 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
7/8" HT5-50 SSH-78 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
1-1/4" LDF6-50 SSH-114 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
1-5/8" AVA7-50 SSH-158 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
1-5/8" LDF7-50A SSH-158 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
1-5/8" AL7-50 SSH-158 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
1-5/8" HJ7-50A SSH-158 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6)
2-1/4" LDF12-50 206706A-6 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6)
2-1/4" HJ12-50 206706A-6 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6)
Appendix 6
Snap-In HangerRecommended Maximum Hanger Spacing
Radial Ice
1/2" LDF4-50A SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" LDF4-75A SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" HL4RP-50 SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" HJ4-50 SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" HLT4-50 SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" HT4-50 SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" HST4-50 SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" HS4RP-50 SSH-12 3 (0.9) 3 (0.9) 2 (0.6) 3 (0.9) 2 (0.6) 1 (0.3)
1/2" FSJ4-50B SSH-12 3 (0.9) 2 (0.6) 1 (0.3) 2 (0.6) 2 (0.6) 1 (0.3)
1/2" FSJ4-75A SSH-12 3 (0.9) 2 (0.6) 1 (0.3) 2 (0.6) 2 (0.6) 1 (0.3)
5/8" LDF4.5-50 206706A-6 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 1 (0.3)
5/8" HJ4.5-50 206706A-6 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6) 1 (0.3)
7/8" AVA5-50 SSH-78 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3)
7/8" LDF5-50A SSH-78 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3)
7/8" AL5-50 SSH-78 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3)
7/8" HJ5-50 SSH-78 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3)
7/8" HJ5-75 SSH-78 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3)
7/8" HT5-50 SSH-78 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3)
1-1/4" LDF6-50 SSH-114 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3)
1-5/8" AVA7-50 SSH-158 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3)
1-5/8" LDF7-50A SSH-158 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3)
1-5/8" AL7-50 SSH-158 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3)
1-5/8" HJ7-50A SSH-158 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3)
2-1/4" LDF12-50 206706A-6 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 1 (0.3) 1 (0.3)
2-1/4" HJ12-50 206706A-6 2 (0.6) 2 (0.6) 1 (0.3) 2 (0.6) 1 (0.3) 1 (0.3)
Appendix 6
Click-On HangerRecommended Maximum Hanger Spacing
Radial Ice
1/2" LDF4-50A L4CLICK, 1 Stack 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9)
Note: These same hanger spacing recommendations apply for the other following 1/2 in cable types: LDF4-75A, HL4RP-50, HLT4-50, HS4RP-50, HST4-50, HT4-50, HJ4-50
5/8" LDF4.5-50A L45CLICK, 1 Stack 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9)
Note: These same hanger spacing recommendations apply for the other following 5/8 in cable types: HJ4.5-50
Note: These same hanger spacing recommendations apply for the other following 7/8 in cable types: AVA5-50, VXL5-50, AL5-50, HJ5-50, HJ5-75, HT5-5
1-1/4" LDF6-50 L6CLICK, 1 Stack 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9)
1-1/4" LDF6-50 L6CLICK, 2 Stack 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9)
1-1/4" LDF6-50 L6CLICK, 3 Stack 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9)
1-5/8" LDF7-50A L7CLICK, 1 Stack 4 (1.2) 4 (1.2) 4 (1.2) 3 (0.9) 3 (0.9) 3 (0.9)
Note: These same hanger spacing recommendations apply for the other following 1 5/8 in cable types: HJ7-50A, AVA7-50, AL7-50
* These hanger spacings have been specified based on using the Click-On Hangers with Andrew specified hardware kits.
(Note: Standard tower configuration spacing is 3 to 4 ft)
and exposure factors.
Appendix 6
Click-On HangerRecommended Maximum Hanger Spacing
Radial Ice
1/2" LDF4-50A L4CLICK, 3 Stack 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6
Note: These hanger spacing recommendations are also applicable for these 1/2 in cable types: LDF4-75A, HL4RP-50, HLT4-50, HS4RP-50, HST4-50, HT4-50, HJ4-50
Note: These hanger spacing recommendations are also applicable for this 5/8 in cable type: HJ4.5-50
Note: These hanger spacing recommendations are also applicable for these 7/8 in cable types: AVA5-50, VXL5-50, AL5-50, HJ5-50, HJ5-75, HT5-5
1-1/4" LDF6-50 L6CLICK, 1 Stack 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6)
1-1/4" LDF6-50 L6CLICK, 2 Stack 3 (0.9) 3 (0.9) 3 (0.9) 2 (0.6) 2 (0.6) 2 (0.6)
1-1/4"
1-5/8" LDF750A L7CLICK, 3 Stack 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6)
LDF6-50 L6CLICK, 3 Stack 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6) 2 (0.6)
Note: These hanger spacing recommendations are also applicable for these 1 5/8 in cable types: HJ7-50A, AVA7-50, AL7-50
(Note: Standard tower configuration spacing is 3 to 4 ft)
Mini Click-On HangerRecommended Maximum Hanger Spacing
Cable Size Cable Part Number Hanger Part Number
Wind Speed 125 mph (200 km/h)
Radial Ice
6 mm8mm CNT-240, CNT-300, FSJ1 series 68MCLICK, 1 Stack 1.5 (0.61) 1.5 (0.61) 1.5 (0.61)
6 mm8mm CNT-240, CNT-300, FSJ1 series 68MCLICK, 2 Stack 1.5 (0.61) 1.5 (0.61) 1.5 (0.61)
6 mm8mm
9 mm12 mm CNT-400, LDF1, FSJ2, LDF2, EFX2 series 912MCLICK, 1 Stack 3.0 (0.90) 3.0 (0.90) 3.0 (0.90)
9 mm12 mm CNT-400, LDF1, FSJ2, LDF2, EFX2 series 912MCLICK, 2 Stack 3.0 (0.90) 3.0 (0.90) 3.0 (0.90)
9 mm12 mm
13 mm16 mm CNT-500, CNT-600, FSJ and LDF4 series 1316MCLICK, 1 Stack 3.0 (0.90) 3.0 (0.90) 3.0 (0.90)
CNT-400, LDF1, FSJ2, LDF2, EFX2 series 912MCLICK, 3 Stack 2.0 (0.60) 2.0 (0.60) 2.0 (0.60)
CNT-240, CNT-300, FSJ1 series 68MCLICK, 3 Stack 1.5 (0.61) 1.5 (0.61) 1.5 (0.61)
No Ice 1/2" (13 mm) 1" (25 mm)
Appendix 6
Standard Hanger for HELIAX
Elliptical WaveguideRecommended Maximum Hanger Spacing

Waveguide Type Hanger Part Number Recommended Maximum Hanger Spacing, feet (meters)
EW17 31766A-9 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80)
EW20 31766A-10 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80)
EW28 31766A-11 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 6.0 (1.80) 5.5 (1.68)
EW37 42396A-4 6.0 (1.80) 6.0 (1.80) 5.5 (1.68) 5.5 (1.68) 5.5 (1.68) 5.0 (1.50)
EW43 42396A-16 6.0 (1.80) 6.0 (1.80) 5.5 (1.68) 5.0 (1.50) 5.0 (1.50) 4.5 (1.37)
EW52 42396A-8 5.5 (1.68) 5.0 (1.50) 4.5 (1.37) 4.5 (1.37) 4.5 (1.37) 4.0 (1.20)
EW63 42396A-7 5.0 (1.50) 4.5 (1.37) 4.0 (1.20) 4.0 (1.20) 4.0 (1.20) 3.5 (1.07)
EW64 42396A-1 5.0 (1.50) 6.0 (1.80) 4.0 (1.20) 4.5 (1.37) 4.0 (1.20) 3.5 (1.07)
EW77 42396A-11 5.0 (1.50) 6.0 (1.80) 4.0 (1.20) 4.5 (1.37) 4.0 (1.20) 3.5 (1.07)
EW85 42396A-5 5.5 (1.68) 6.0 (1.80) 4.0 (1.20) 4.5 (1.37) 4.0 (1.20) 3.5 (1.07)
EW90 42396A-5 5.5 (1.68) 4.5 (1.37) 4.0 (1.20) 4.5 (1.37) 4.0 (1.20) 3.0 (0.90)
EW127A 42396A-9 5.5 (1.68) 4.5 (1.37) 3.5 (1.07) 4.5 (1.37) 4.0 (1.20) 3.0 (0.90)
EW132 42396A-9 5.5 (1.68) 4.5 (1.37) 3.5 (1.07) 5.0 (1.20) 4.0 (1.20) 3.0 (0.90)
EW180 43211A 6.0 (1.80) 4.5 (1.37) 3.5 (1.07) 5.0 (1.20) 4.0 (1.20) 3.0 (0.90)
EW220 43211A 6.0 (1.80) 4.5 (1.37) 3.5 (1.07) 5.0 (1.20) 4.0 (1.20) 3.0 (0.90)
EW240 43211A 6.0 (1.80) 4.5 (1.37) 3.5 (1.07) 5.0 (1.20) 4.0 (1.20) 3.0 (0.90)
EW380 43211A 6.0 (1.80) 4.5 (1.37) 3.5 (1.07) 5.0 (1.20) 4.0 (1.20) 3.0 (0.90)
Note: Standard tower configuration spacing is 3 to 4 ft.
HELIAX
Elliptical Waveguide
Recommended maximum hanger spacings are tabulated below for
various wind speed and ice conditions. The recommendations are based
on guidelines stated in EIA Standard RS-222 and new wind tunnel and
vibration tests. They supersede those in previous Andrew catalogs.

Installations in Typical Climates
Use the 125 mph (200 km/h), 1/2 in ice conditions, highlighted in red.
Severe or Mild Climates
Use the wind speed and ice conditions that most closely approximate the
expected worst case conditions for the local climate.
Appendix 6
Standard Hanger for HELIAX
Elliptical WaveguideRecommended Maximum Hanger Spacing

Waveguide Type Hanger Part Number Recommended Maximum Hanger Spacing, feet (meters)
Radial Ice
EW17 31766A-9 6.0 (1.80) 6.0 (1.80) 5.5 (1.68) 5.0 (1.50) 5.0 (1.50) 4.5 (1.37)
EW20 31766A-10 5.5 (1.68) 5.5 (1.68) 5.0 (1.50) 4.5 (1.37) 4.5 (1.37) 4.0 (1.20)
EW28 31766A-11 5.0 (1.50) 5.0 (1.50) 4.5 (1.37) 4.0 (1.20) 4.0 (1.20) 3.5 (1.07)
EW37 42396A-4 4.5 (1.37) 4.5 (1.37) 4.0 (1.20) 3.5 (1.07) 3.5 (1.07) 3.0 (.090)
EW43 42396A-16 4.0 (1.20) 4.0 (1.20) 3.5 (1.07) 3.5 (1.07) 3.5 (1.07) 3.0 (.090)
EW52 42396A-8 3.5 (1.07) 3.5 (1.07) 3.0 (.090) 3.0 (.090) 3.0 (.090) 2.5 (0.76)
EW63 42396A-7 3.5 (1.07) 3.0 (.090) 2.5 (0.76) 2.5 (0.76) 2.5 (0.76) 2.0 (0.60)
EW64 42396A-1 3.5 (1.07) 3.0 (.090) 2.5 (0.76) 3.0 (.090) 2.5 (0.76) 2.0 (0.60)
EW77 42396A-11 3.5 (1.07) 3.0 (.090) 2.5 (0.76) 3.0 (.090) 2.5 (0.76) 2.0 (0.60)
EW85 42396A-5 3.5 (1.07) 3.0 (.090) 2.5 (0.76) 3.0 (.090) 2.5 (0.76) 2.0 (0.60)
EW90 42396A-5 3.5 (1.07) 3.0 (.090) 2.5 (0.76) 3.0 (.090) 2.5 (0.76) 2.0 (0.60)
EW127A 42396A-9 3.5 (1.07) 3.0 (.090) 2.5 (0.76) 3.0 (.090) 2.5 (0.76) 2.0 (0.60)
EW132 42396A-9 4.0 (1.20) 3.0 (.090) 2.5 (0.76) 3.0 (.090) 2.5 (0.76) 2.0 (0.60)
EW180 43211A 4.0 (1.20) 3.0 (.090) 2.5 (0.76) 3.5 (1.07) 2.5 (0.76) 2.0 (0.60)
EW220 43211A 4.0 (1.20) 3.0 (.090) 2.5 (0.76) 3.5 (1.07) 2.5 (0.76) 2.0 (0.60)
EW240 43211A 4.0 (1.20) 3.0 (.090) 2.5 (0.76) 3.5 (1.07) 2.5 (0.76) 2.0 (0.60)
* These hanger spacing recommendations have been specified using the click-on hangers with Andrew specified hardware kits.
I
N
D
E
X
114468. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
114469. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
12395-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1316MCLICK . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
19256B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
204673-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204673-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204673-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204673-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204673-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204673-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204673-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204673-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204673-2A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204673-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204673-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204673-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204673-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-17 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-19 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204679A-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
204989 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
204989-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
204989-28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
204989-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
206706A-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
206706A-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
207270. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
207270. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
209874. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
209874. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
220497. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
220498. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
221213. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
221213. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
221213-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
223158-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
223158-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
223158-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
223700-724 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
224352. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
224354. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
224355. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
224356. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
224360. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
224361. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
224361. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
224361. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
224362. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
224362. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
224362. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
224363. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
224368. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
224373. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
224380. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
224395. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
241088. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
241088-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
241088-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
241088-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
241088-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
241088-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
241088-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
241088-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
241088-60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
241088-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
241088-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
241088-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
241088-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
241475-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
241545. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
241953. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
243095-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
243095-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
243095-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
243095-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
243095-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
243095-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
243095-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
243095-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
243095-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
243095-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
243095-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
243095-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
24312A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
243684. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
243684. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
243684-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
243684-MH . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
243950. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
243951. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
244350. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
244373. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
244374. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
244374. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
244374. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
244375. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
244375. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
244376. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
244377. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
244377. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
244378. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
244378. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
244379. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
244379. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
244394. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
244459-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
244459-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
244459-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
244494. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
244494. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
244495. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
244847. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
245154. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
245154. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
245171. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
245172. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
245173. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
245174. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
245175. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
245314-127A . . . . . . . . . . . . . . . . . . . . . . . . . . 23
245314-132 . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
245314-180 . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
245314-220 . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
245314-240 . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
245314-37 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
245314-43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
245314-52 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
245314-63 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
245314-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
245314-77 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
245314-85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
245314-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
245516. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
245529-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
247696. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
247696. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
247696. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
247698. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
247698. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
247763. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
247763-I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
252026-10KT . . . . . . . . . . . . . . . . . . . . . . . . . . 13
252027-10KT . . . . . . . . . . . . . . . . . . . . . . . . . . 13
252028-10KT . . . . . . . . . . . . . . . . . . . . . . . . . . 13
252029-10KT . . . . . . . . . . . . . . . . . . . . . . . . . . 13
26985A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
29958. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
29961. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
30848-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
30848-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
30848-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
30848-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
30848-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
31031-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
31535. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
31670-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
31670-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
31670-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
31670-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
31670-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
31670-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
31766A-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
31766A-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
31766A-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
31766A-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
31766A-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
31768A-M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
31769-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
31769-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
31771. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
31771-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
31771-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Index
31771-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
31771-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
34759. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
35849A-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
35849A-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
35849A-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3CCGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
40417. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
42334. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
42396A-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42396A-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
42615-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
43094. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
43211A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
43211A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
43211A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
43211A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
43211A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
48939A-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
48939A-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
48939A-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
48939A-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
48939A-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
48939A-17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
48939A-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
48939A-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
48939A-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
48939A-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
48939A-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
48939A-7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
48939A-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
48939A-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
68MCLICK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
912MCLICK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9905-41 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
9905-71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
A5MCPT-78 . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
A5MCPT-BK5 . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ABT-DFDM-ADBH . . . . . . . . . . . . . . . . . . . . . . . 38
ABT-DFDM-DB . . . . . . . . . . . . . . . . . . . . . . . . . . 38
ABT-DMDF-ADBH . . . . . . . . . . . . . . . . . . . . . . . 38
ABT-DMDF-DB . . . . . . . . . . . . . . . . . . . . . . . . . . 38
ABT-NFNM-DB . . . . . . . . . . . . . . . . . . . . . . . . . . 38
ABT-NMNF-DB . . . . . . . . . . . . . . . . . . . . . . . . . . 38
ADCB-DFDM-DB . . . . . . . . . . . . . . . . . . . . . . . . 38
APB-BNFNF-2400 . . . . . . . . . . . . . . . . . . . . . . . 37
APC-BDFDM-450 . . . . . . . . . . . . . . . . . . . . . . . 37
APC-BDFDM-700 . . . . . . . . . . . . . . . . . . . . . . . 37
APC-BDFDM-DB . . . . . . . . . . . . . . . . . . . . . . . . 37
APG-BDFDF-090 . . . . . . . . . . . . . . . . . . . . . . . . 37
APG-BDFDF-350 . . . . . . . . . . . . . . . . . . . . . . . . 37
APG-BDFDM-090 . . . . . . . . . . . . . . . . . . . . . . . 37
APG-BDFDM-350 . . . . . . . . . . . . . . . . . . . . . . . 37
APG-BNFNF-090 . . . . . . . . . . . . . . . . . . . . . . . . 37
APG-BNFNF-350 . . . . . . . . . . . . . . . . . . . . . . . . 37
APG-BNFNM-090 . . . . . . . . . . . . . . . . . . . . . . . 37
APG-BNFNM-350 . . . . . . . . . . . . . . . . . . . . . . . 37
APORT-13-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
APTA5DC-BDF-DB . . . . . . . . . . . . . . . . . . . . . . . 38
APTA7DC-BDF-DB . . . . . . . . . . . . . . . . . . . . . . . 38
APT-BDFDF-DB . . . . . . . . . . . . . . . . . . . . . . . . . 37
APT-BDFDM-DB . . . . . . . . . . . . . . . . . . . . . . . . . 37
APT-BNFNF-DB . . . . . . . . . . . . . . . . . . . . . . . . . 37
APT-BNFNM-DB . . . . . . . . . . . . . . . . . . . . . . . . . 37
APTDC-BDFDF-DB . . . . . . . . . . . . . . . . . . . . . . . 37
APTDC-BDFDM-DB . . . . . . . . . . . . . . . . . . . . . . 37
APTDC-BNFNM-DB . . . . . . . . . . . . . . . . . . . . . . 37
APT-DFDF-DB . . . . . . . . . . . . . . . . . . . . . . . . . . 37
APT-DFDM-DB . . . . . . . . . . . . . . . . . . . . . . . . . . 37
APT-NFNF-DB . . . . . . . . . . . . . . . . . . . . . . . . . . 37
APT-NFNM-DB . . . . . . . . . . . . . . . . . . . . . . . . . . 37
ARA-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
AWE-11412 . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
AWE-15812 . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
AWE-7812 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
AWE-A12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
C2SGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
C2SGRIP-2IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CAP-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
CGT114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
CGT12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
CGT158 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
CGT214 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
CGT58 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
CGT78 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
CM-TB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CM-TBR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CM-TG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CM-TR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CM-TW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CM-TY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CPT-158U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-158U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-158U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CPT-78U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-78U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-78U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
CPT-BK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-BK5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-BK6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-BK7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-BKS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-BKS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-BKS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-BKS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-BKS1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-E2L2DIN. . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-E2L2DIN. . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-E2L2DIN. . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-E2L2N . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-E2L2N . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-E2L2N . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-F4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-F4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-F4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
CPT-L1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-L1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-L45RC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-L45RC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-L4ARC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-L4ARC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPT-L4ARC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
CPTL6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPTL6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPTL6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CPTV2-114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPTV2-114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CPTV2-158 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPTV2-158 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CPTV2-BK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPTV2-BK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CPTV2-BK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CS-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CSGL4-06B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL4-06S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL4-10B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL4-10S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL4-15B4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL4-15S4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL5-06B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL5-06S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL5-10B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL5-10S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL5-15B4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL5-15S4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL6-06B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL6-06S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL6-10B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL6-10S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL6-15B4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL6-15S4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL7-06B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL7-06S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL7-10B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL7-10S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL7-15B4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
CSGL7-15S4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
DF-CAPKIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
E2SGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
E2SGRIP-2IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
EP-CAP5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
EWSH-127A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
EWSH-132 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
EWSH-180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
EWSH-220 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
EWSH-240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
EWSH-52 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
EWSH-63 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
EWSH-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
EWSH-77 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
EWSH-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
F1SGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
F1SGRIP-1IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Index
F2SGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
F2SGRIP-2IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
F4SGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
F4SGRIP-4IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
GASTUBE-090 . . . . . . . . . . . . . . . . . . . . . . . . . . 38
GBKIT-0414 . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
GK-SUNV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
GKT-114A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-114A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-114A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
GKT-158A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-158A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-158A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
GKT-78A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-78A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-78A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
GKT-BK512 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-BK512 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-BK512 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
GKT-BK512 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
GKT-BK67 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-BK67 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-BK67 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
GKT-BK67 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
GKT-BKF4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-F4A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-F4A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-L4A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-L4A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
GKT-L4A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
L12SGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L12SGRIP-12IK . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L12SGRIP-12IK . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L1SGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L1SGRIP-1IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L2SGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L2SGRIP-2IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L45CLAMP-( ) . . . . . . . . . . . . . . . . . . . . . . . . . . 14
L45CLICK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
L45SGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L45SGRIP-45IK . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L45SGRIP-45IK . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L4CLAMP-( ) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
L4CLICK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
L4SCLICK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
L4SGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L4SGRIP-4IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L4SGRIP-4IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L5CLAMP-( ) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
L5CLICKB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
L5SCLICKB . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
L5SGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L5SGRIP-5IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L5SGRIP-5IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L6CLAMP-( ) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
L6CLICK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
L6SCLICK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
L6SGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L6SGRIP-6IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L6SGRIP-6IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L7CLAMP-( ) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
L7CLICK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
L7SCLICK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
L7SGRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L7SGRIP-7IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
L7SGRIP-7IK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
MCPT-1412. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
MCPT-1412. . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
MCPT-1412. . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
MCPT-3812. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
MCPT-3812. . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
MCPT-78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
MCPT-78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
MCPT-BK4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
MCPT-BK5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
MCPT-L4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
MCPT-L4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
MCPT-V2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
MF39901-10. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
MT-F1598 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MT-F1599 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MT-F1600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PLUG-114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PLUG-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PLUG-158 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PLUG-78 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
R8CLAMP-( ) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
RM-USBG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SA-38 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SCE-114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
SCE-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
SCE-158 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
SCE-214 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
SCE-58 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
SCE-78 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
SG-IT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SGL12-06B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL12-10B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL12-15B4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL4-06B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL4-06S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL4-10B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL4-15B4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL45-06B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL45-10B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL45-15B4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL5-06B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL5-06B2-T . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL5-06S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL5-10B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL5-15B4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL5-15B4-T . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL6-06B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL6-06S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL6-10B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL6-15B4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL7-06B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL7-06B2-T . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL7-06S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL7-10B2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL7-15B4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SGL7-15B4-T . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SHT-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
SSH-114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SSH-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SSH-158 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SSH-78 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SSHA-38 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SSHAK-3812 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SS-TB2550 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SS-TB6080 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
STS3-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
STS3-23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
STS3-34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
STS3-45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
TB-COMP-KIT . . . . . . . . . . . . . . . . . . . . . . . . . . 27
UA-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
UAAI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
UG12158-15B4 . . . . . . . . . . . . . . . . . . . . . . . . . 33
UGBA-34 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
UGBA-36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
UGBA-DIN-34 . . . . . . . . . . . . . . . . . . . . . . . . . . 36
UGBA-DIN-36 . . . . . . . . . . . . . . . . . . . . . . . . . . 36
UGBKIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
UGBKIT-0210 . . . . . . . . . . . . . . . . . . . . . . . . . . 34
UGBKIT-0210-T . . . . . . . . . . . . . . . . . . . . . . . . . 34
UGBKIT-0212 . . . . . . . . . . . . . . . . . . . . . . . . . . 34
UGBKIT-0212-T . . . . . . . . . . . . . . . . . . . . . . . . . 34
UGBKIT-0214 . . . . . . . . . . . . . . . . . . . . . . . . . . 34
UGBKIT-0214-T . . . . . . . . . . . . . . . . . . . . . . . . . 34
UGBKIT-0412 . . . . . . . . . . . . . . . . . . . . . . . . . . 35
UGBKIT-0412-T . . . . . . . . . . . . . . . . . . . . . . . . . 35
UGBKIT-0414-T . . . . . . . . . . . . . . . . . . . . . . . . . 35
UGBKIT-0420 . . . . . . . . . . . . . . . . . . . . . . . . . . 36
UGBKIT-0420-T . . . . . . . . . . . . . . . . . . . . . . . . . 36
UGBKIT-0424 . . . . . . . . . . . . . . . . . . . . . . . . . . 36
UGBKIT-0424-T . . . . . . . . . . . . . . . . . . . . . . . . . 36
UGBKIT-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
UGBKIT-2T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
UGBKIT-T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
WGB4-127 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB4-132 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB4-180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB4-220 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB4-240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB4-37 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB4-43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB4-52 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB4-63 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB4-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB4-77 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB4-85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB4-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB5-122 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB5-132 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB5-180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB5-220 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB5-240 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB5-37 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB5-43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB5-52 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB5-63 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB5-64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB5-77 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB5-85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WGB5-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Index
Andrew Corporation
3 Westbrook Corporate Center
Suite 900
Westchester, IL 60154
Customer Support Center
From North America
Telephone: 1-800-255-1479
Fax: 1-800-349-5444
International
Telephone: +1-708-873-2307
Fax: +1-708-349-5444
Internet: www.andrew.com
All designs, specications, and availabilities of products and services presented
in this catalog are subject to change without notice.
Bulletin CA-101772-EN (06/07) Printed in the USA
2007 Andrew Corporation, Westchester, IL 60154 USA
One Company. A World of Solutions.

Accessories Andrew PDF

Uploaded by

Copyright:

Available Formats

Accessories Andrew PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Accessories Andrew PDF

Uploaded by

Copyright:

Available Formats

Accessories FOR HELIAX

Metal Framing. The 3/4 in hole accepts common snap-in

coaxial cable, stackable

coaxial cable. These compact angle adapters

Anchor rail adapter

3/8" (M10) drilled

Fits most cable sizes

3/8" (M10) drilled

Fits round, at angle,

surge protectors, and transmission line grounding into an

2 Cable Preparation Tools

Plus Automated Cable Preparation Tool

Cable Preparation Tool

Size/Type 600 mm 1 meter 1.5 meters

T-series surge arrestors give engineers more flex-

Lightning Surge Arrestors

integrated, T-series lightning surge arrestor is a one-

connector. It uniquely combines the reli-

T-series surge arrestors from Andrew Corporation

surge arrestors are designed with high pressure

V rms per carrier (volts)

number of carriers (N)

gas tube surge arrestors allow field

dc passing surge arrestors (US patent

dc passing wideband surge arrestors are the same

Connector Tool Kit 237274

Elliptical WaveguideRecommended Maximum Hanger Spacing

Elliptical WaveguideRecommended Maximum Hanger Spacing

You might also like