PH 318- Introduction to superconductors

1
SUPERCONDUCTIVITY
property of complete disappearance of electrical
resistance in solids when they are cooled below a
characteristic temperature. This temperature is called
transition temperature or critical temperature.
Superconductive state of mercury (T
C
=4.15 K) was
discovered by the Dutch physicist Heike Kamerlingh
Onnes in 1911, several years after the discovery of
liquid helium.
PH 318- Introduction to superconductors
2
Classical elemental superconductors
Element Transition temperature, K
Zinc 0.88
Aluminum 1.20
Indium 3.41
Tin 3.72
Mercury 4.15
Lead 7.19
Until 1983 record T
c
=23.3 K was that of Nb
3
Ge alloy.
PH 318- Introduction to superconductors
3
Progress in T
c
of superconductor materials with time
High temperature superconductors discovered in
1986: T
c
=80-93 K, parent structure YBa
2
Cu
3
O
7
.
At present the record transition temperature (TBCCO)
is now at T
C
= 134 K.
PH 318- Introduction to superconductors
4
Effect of trapped magnetic flux
Consider a ring made out of superconductive
material.
Perform the following thought experiment:
1. At T>T
c
the material is normal state. When the
external magnetic field is turned on, it penetrates
through the ring.
2. Reduce the temperature so that T<T
c
.
3. Remove the external magnetic field.
PH 318- Introduction to superconductors
5
4. You discover that the magnetic field that was
penetrating through the opening of the ring magnetic
field remains there. The magnetic flux remains
trapped in the ring opening.
This effect can be explained in terms of Faradays law
of induction
r r
E d l
d
dt
. =
z

PH 318- Introduction to superconductors
6
r r
E d l
d
dt
. =
z

where E is the electric filed along the closed loop,
is the magnetic flux through the opening of the ring.
Before the external magnetic field was turned off
there was a magnetic flux =B.(area) through the
ring.
Below T
c
the resistivity of superconductor becomes
equal to zero and therefore at T<T
c
the electric field
inside the superconductor must be and is zero as
well. In view of this
r r
E d l . =
z
0
and therefore,
the right side of Faradays equation
d
dt

= 0
which means that
= = B area const
b g
The magnetic flux through the ring must remain
constant. For this reason the magnetic flux remains
trapped in the opening of the ring after the external
magnetic field has been turned off.
PH 318- Introduction to superconductors
7
There is no magic involved. The trapped magnetic
field passing through the ring is due to the current
induced in the ring when the external magnetic field
was turned off.
The induced current is called the persistent current.
The current persists, it does not decay because the
resistance of the ring is zero. Actually no decrease of
current was observed over the period of three years!
Theoretically, the relaxation time of current carriers in
the superconductor is greater than the age of
universe.
PH 318- Introduction to superconductors
8
Meissner effect
expulsion of magnetic field from the interior of the
superconductor
Thought experiment
Consider a sphere made out of superconductive
material. At T>T
c
the material is in normal state.
When external magnetic field is turned on, the
external magnetic field penetrates through the
material.
On the basis of Faradays law,
r r
E d l
d
dt
. =
z

one would expect that at T<T
c
the magnetic field
would remain trapped in the material after the
external field has been turned off.
PH 318- Introduction to superconductors
9
The trapping of magnetic field does not happen (the
absence of magnetic field inside the superconductor
is the Meissner effect).
This is what happens:
The magnetic field is expelled from the interior of the
superconductor, inside the superconductor B=0.
Superconductor expels magnetic field from the
interior by setting up electric current at the surface.
The surface current creates magnetic field that
exactly cancels the external magnetic field!
This electric current at the surface of the
superconductor appears at T<T
c
in order that B=0
inside the superconductor.
PH 318- Introduction to superconductors
10
Penetration of magnetic field below the surface of
superconductors
The surface current is distributed in the surface layer,
the layer carrying the electric current has a finite
thickness, and because of this, the external magnetic
field partially penetrates into the interior of the
superconductor,
B x B
x
external
( ) exp =
F
H
G
I
K
J

= penetration distance at temperature T;

0
= penetration distance at temperature T=0.

F
H
G
I
K
J
0
4
1
T
T
C

0
= 30 - 130 nm, depending on the superconductor
material
PH 318- Introduction to superconductors
12
The magnetic properties of superconductors
In addition to the loss of resistance, superconductors
prevent external magnetic field from penetrating the
interior of the superconductor. This expulsion of
external magnetic fields takes place for magnetic
fields that are less than the critical field. Magnetic
field greater than B
C
destroys the superconductive
state.
PH 318- Introduction to superconductors
13
Critical magnetic field
The critical magnetic field depends upon the
temperature,
B T B
T
T
C C
C
( ) =
F
H
G
I
K
J
F
H
G
I
K
J 0
2
1
B
C0
= critical magnetic field at T=0.
PH 318- Introduction to superconductors
14
Relationship between resistivity (a), magnetic field
inside the superconductive material (b) and
magnetization of superconductor as a function of
external magnetic field
PH 318- Introduction to superconductors
15
Critical current
Superconductive state is destroyed by magnetic field.
Consider a straight wire. Since electric current in the
wire creates magnetic field
B
I
r
=

0
2
The wire can carry maximum superconductive
current, I
c
, corresponding to the critical magnetic field
B
c
at the surface of the wire, r=R,
I
RB
C
C
=
2
0

0
= 4 10
-7
Tm/A is the magnetic permeability of free
space.
PH 318- Introduction to superconductors
16
Type I and Type II Superconductors
exhibit different magnetic response to external
magnetic field.
In Type I superconductor the magnetic field is
completely expelled from the interior for B<B
C
.
PH 318- Introduction to superconductors
17
Type II superconductors have two values of critical
magnetic field, for B<B
C1
the magnetic field is
completely expelled (Type-I behavior), whereas for
B
C1
<B<B
C2
the magnetic field partially penetrates
through the material.
PH 318- Introduction to superconductors
18
The bulk of superconductor material breaks down
into two regions: superconductive from which the
external field is completely expelled, and normal
through which the external field penetrates.
The normal regions are distributed as filaments filled
with the external magnetic field. The flux of magnetic
field through the filaments is quantized. Electric
current is induced at the interface between the
normal and the superconductive regions, the
surface of filaments is wrapped in current which
cancels the magnetic field in the superconductive
regions.
The electric current is carried by the superconductive
regions of Type-II material.
PH 318- Introduction to superconductors
19
Superconductive magnets
The main advantage of the superconductive magnet,
in contrast to the electromagnet, is that it does not
need to use (dissipate) energy to maintain the
magnetic field.
However,
I
RB
C
C
=
2
0

In order to achieve high critical currents in

0
15
2
2 07 10 = =

h
e
x weber .
(Wb=Tesla.m
2
)
In general, the magnetic flux is
= n
0
where n is an integer.
PH 318- Introduction to superconductors
20
Mechanism of superconductivity
Isotope effect, T
c
depends on the mass of atoms
T
mass of atoms constituting the crystal lattice
c

1
Interaction between electrons and lattice atoms is
critical for the existence of superconductive state.
Good conductors (weak scattering from the lattice)
are poor superconductors (low T
C
).
Electrons on their flight through the lattice cause
lattice deformation (electrons attract the positively
charged lattice atoms and slightly displace them)
which results in a trail of positively charged region.
This positively charged region of lattice atoms attracts
another electron and provides for electron-electron
coupling.
PH 318- Introduction to superconductors
21
Electron pairs, and not single electrons, are charge
carriers in superconductors
The electron-electron coupling is weak and can be
destroyed by thermal motion of the lattice. For this
reason superconductivity exists only at low
temperatures.
The electron-electron coupling results in electron
pairing - formation of Cooper pairs. The Cooper pairs
do not have spin 1/2 and therefore do not follow
Paulis principle (1 electron per state). Large number
of Cooper pairs can populate one collective state.
This state is stable and requires some additional
energy input (thermal energy) to be destroyed. The
binding energy of Cooper pairs in the collective state
is several meV.
PH 318- Introduction to superconductors
22
Formation of Cooper pairs is a spontaneous process
resulting in lower energy state of electrons in the
superconductor. In superconductors, the filled state
are occupied by Coopers pairs, and the empty band,
above E
g
, is occupied by broken Cooper pairs.
The band gap E
g
is a measure of binding energy of
Cooper pairs, the greater binding energy, the greater
T
c
.
E k T
g B c
= 3 53 . .
E
g
confirmed from absorption spectra. For hc/>E
g
electromagnetic radiation absorbed.
PH 318- Introduction to superconductors
23
No scattering, no resistance
The formation of collective state of Cooper pairs take
place at T<T
C
. In the collective bound state the
Cooper pairs do not scatter from the lattice and the
conductivity of superconductor is infinitely large.
Scattering of electrons from the lattice atoms require
a change of state of electron.
In the superconductive state the current carrying
species is the electron pair. For the Cooper pair to
scatter it would have to change its state (like an
electron in normal metal). However, the Cooper pair
is coupled to a large number of other Cooper pairs
and so the whole collective of Cooper pairs would
have to be involved in scattering at once. This does
not happen, and therefore there is no scattering of
Cooper pairs and therefore the conductivity is infinite.
PH 318- Introduction to superconductors
24
Current-voltage characteristics of metal-insulator-
superconductor junction
PH 318- Introduction to superconductors
25
Josephson effect
Consider two superconductors separated by a thin
insulating layer, few nm thick.
Brian Josephson noted (1962) that
1. Electron pairs in the two superconductors can form
a single collective state and the electron pairs can
tunnel through the insulating layer.
DC Josepson effect = electron tunneling curent
across the junction in the absence of applied voltage.
PH 318- Introduction to superconductors
26
2. If a DC voltage bias is applied across the junction,
there is an AC current through the junction that
oscillates with frequency
f
e
h
V =
2
The existence of ac current through the biased
junction = AC Josephson effect.
The AC Josephson effect provides a method for the
most accurate measurement of the electric potential
difference because f can be determined accurately by
frequency counters.
The value of 2e/h=483.6 MHz/V.
PH 318- Introduction to superconductors
27
SQUID
=Superconductive QUantum Interference Device
consist of two Josephson junctions forming a ring.
SQUIDs are used to measure extremely weak
magnetic fields (for example, magnetic fields created
by currents in the brain in response to various stimuli
or thinking).