Helicoptero Huey II
Helicoptero Huey II
b e l l h e l i c o p t e r. c o m
Q3 2008
Huey II
The Legend
Lives On
Bell Helicopter made its mark with the Huey, and the old
workhorse has found a second life in its reincarnation as the Huey II.
Its taking a UH-1H and remanufacturing it into a UH-1H II,
what we refer to as a Huey II, said Kyle Shiminski, Huey II program
director. It takes an old Huey, which there are many out there
in the field and increases its performance while upgrading
the aircraft with commercial rotors. Were basically putting a
commercial 212 rotor system on the Huey.
Its hardly a new program - Bell has delivered more than 200 kits
in the last decade or so. More than 150 Huey IIs have flown more
than 195,000 hours around the world.
The helicopter has started receiving more attention lately as an
option for foreign and domestic customers. The Huey II is a certified
public use aircraft rather than a commercial helicopter, which
means it cant be used to haul passengers for hire. However, it
finds plenty of use in other ways, including law enforcement, drug
interdiction, foreign military and emergency services.
The opportunities right now are pretty strong, Shiminski said.
Its one of the few products we have right now that we can
deliver within 12 months. The production and delivery of a Huey II
takes nine to 12 months.
Customers have various options for upgrading, but Bell typically
handles the operation. The conversion kit involves more than 9,000
parts, including a more efficient 212 main rotor system; a new antitorque system tractor tail rotor; 212 drivetrain; a new, baggageless
tailboom; more engine power; a higher rated transmission; and a
Kaflex drive shaft.
The process starts with a UH-1H usually the customers aircraft,
but Bell can supply one if necessary.
McTurbine takes the Honeywell engine and upgrades it to what
is essentially an AH-1S Cobra engine that provides 28 percent more
takeoff power for nearly identical fuel consumption.
U.S. Helicopter performs the integration at its Ozark, Ala.,
facility. The floor and wiring is removed and the frame torn down to
its bare bones. In addition to repairing any damage, the program
upgrades the airframe to handle the increased capacity.
Theres a good-sized bump in performance with the upgrade,
including hover capability, a top speed of 130 knots, max gross
weight of 11,200 pounds externally and increased payload.
A Huey II also represents a significant maintenance cost savings
thanks to a significant increase in time between overhaul (TBO) for
major components. Some double, such as the engine, which goes
from 2,400 hours to 5,000 hours before an overhaul. Some increases
24
ATTENTION:
FIRST RESPONDERS
The Bell Helicopter Training Academy
(BTA) has developed a 1st Responder
Helicopter Safety training program that is
targeted for the first responder community
involved in helicopter operations. This
ground safety helicopter course is DVD/CDbased. The cost for the DVD/CD set is $50.00.
For more information regarding this
program, please contact: Joe Schmaltz,
jeschmaltz@bellhelicopter.textron.com
817.280.8433.
Bell employees at the Grand Opening of the new Canadian Supply Center.
450.437.2862 or 800.363.8023
450.433.0272
pselight@bellhelicopter.textron.com
Model 407
Phone:
FAX:
E-Mail:
Phone:
FAX:
E-Mail:
450.971.6407 or 800.243.6407
450.433.0272
pselight@bellhelicopter.textron.com
450.437.6201 or 800.363.8028
450.433.0272
psemedium@bellhelicopter.textron.com
450.437.2077 or 800.463.3036
450.433.0272
pseinter@bellhelicopter.textron.com
5
Ultrasonic Inspection
TRANSMITTER/RECEIVER
TRANSDUCER
0.160
INCH
Tap Test
When damage is detected visually on a
composite panel the coin tap method
may be used to determine the extent
of the damage area. This method
is also used to inspect honeycomb
structures for serviceability. This method
of inspection is carried out by tapping
on structure and listening for a change
in pitch from a sharp solid sound, which
would indicate a good bond. A dull
thud of a sound would indicate bond
separation. Changes in the thickness of
the structure, reinforcements, inserts, or
previous repairs will give false readings.
The majority of the time when there is
visual damage to a composite part
there will be some delamination.
Delay/Line
Part Surface
Interface Response
Back Surface
Response From
Composite
Laminate
0 1 2 3 4 5 6 7 8 9 10
0.160
INCH
CRT DISPLAY
TRANSMITTER/RECEIVER
TRANSDUCER
0.060
INCH
0.160
INCH
100
90
80
70
60
50
40
30
20
10
0
Response From
0.060 Depth
0 1 2 3 4 5 6 7 8 9 10
0.060
INCH
CRT DISPLAY
Delamination
At 0.060 Inch
B. Composite Laminate/Delamination
at 0.060 inch
TRANSMITTER/RECEIVER
TRANSDUCER
0.160
INCH
Multi-Level Delamination
At 0.020, 0.040, And 0.060 Inch
100
90
80
70
60
50
40
30
20
10
0
Response From
0.020 Inch
Depth
Response From
0.040 Inch
Depth
Response From
0.080 Inch
Depth
0 1 2 3 4 5 6 7 8 9 10
CRT DISPLAY
Inspection Techniques
Pulse-Echo Ultrasonics
TRANSMITTER/RECEIVER
TRANSDUCER
0.060
INCH
0.160
INCH
Delamination
at 0.060 inch
100
90
80
70
60
50
40
30
20
10
0
Response From
0.060 Inch
Depth
0 1 2 3 4 5 6 7 8 9 10
Delaminations masked
by delamination at 0.060 inch
100
90
80
70
60
50
40
30
Patch
Adhesive 20
10
Laminate 0
TRANSMITTER/RECEIVER
TRANSDUCER
Patch/
Patch Adhesive
Surface Response
Response
Laminate
Black
Surface
Response
0 1 2 3 4 5 6 7 8 9 10
CRT DISPLAY
100
90
80
70
60
50
40
30
Patch
Adhesive 20
10
Laminate 0
TRANSMITTER/RECEIVER
TRANSDUCER
100
90
80
70
60
50
40
30
20
10
0
Patch/
Patch
Adhesive
Surface Response
Response
Absence Of
Laminate
Back
Surface
Response
0 1 2 3 4 5 6 7 8 9 10
CRT DISPLAY
RECEIVER
TRANSDUCER
Part Surface
Response
Opposite
Side Surface
Response
Through-Transmission
Ultrasonics
This method uses two transducers, one
to transmit sound and one to receive.
Sound energy is sent from one side of
a part through the part to the second
transducer on the opposite side. A
defect found in the part will reduce
the intensity of the sound energy. The
reduction of the sound level intensity is
used to detect the presence of defects.
Through-transmission ultrasonics is
usually more sensitive for flaw detection
in bonded assemblies. But it cannot
determine defect depth or type. This
method requires access to both sides
of the part and alignment of the two
transducers during inspection to ensure
the receiving transducer picks up the
sound energy sent by the transmitting
transducer. Test results are displayed
using a scan presentation.
0 1 2 3 4 5 6 7 8 9 10
CRT DISPLAY
Skin to Core Unbond
TRANSMITTER/RECEIVER
TRANSDUCER
Skin To Core
Bond Adhesive
100
90
80
70
60
50
40
30
20
10
0
Composite
Skin Back
Sirface
Response
Adhesive/
Air Interface
Response
0 1 2 3 4 5 6 7 8 9 10
Adhesive/Air
Interface
CRT DISPLAY
Search Unit
Alignment
Fixture Used
To Maintain
Transducer
Alignment
100
90
80
70
60
50
40
30
20
10
0
Absence Of
Opposite
Side Surface
Response
0 1 2 3 4 5 6 7 8 9 10
CRT DISPLAY
CTR RESPONSE FOR BOTH SKINTO CORE
DISBOND AND SKIN DELAMINATION
Through-Transmission Ultrasonics is Unable
To Determine Depth of Defect or DefecT TYPE
B. Transducer Alignment
100
90
80
70
60
50
40
30
20
10
0
0 1 2 3 4 5 6 7 8 9 10
Skin To Core
Disbond
CRT DISPLAY
SkyBOOKS is the
Bell-Textron enterprise
that specializes in flight
operations automation,
maintenance management
compliance, and
aircraft value protection.
SkyBOOKS will ensure
your crew and aircraft
remain mission ready and
compliant at all times.
SkyBOOKS is an internet served
product supported by product
analysts, a quality department and an
aviation management development
team, located in Jacksonville,
Florida. The analysts create a
master template for each individual
aircraft directly from maintenance
manuals or AAIP, FAA Airworthiness
Directives, manufacturers SB/ASB or
communiqus, and Instruction for
Continued Airworthiness (ICAS) from
field modifications or STC installations.
Whenever a revision occurs or a new
directive is released, the SkyBOOKS
team updates the aircraft master
immediately notifying the operator of
the implication of the notice.
SkyBOOKS recognizes that not all
aircraft operators require the same
level of monitoring capability and
therefore offer a variety of different
product and service levels:
SkyBOOKS Full Service Flight
Operations, Maintenance Tracking,
Document Vault, and Analyst
Support.
SkyBOOKS Lite Maintenance
Tracking, Document Vault, and
Analyst Support.
Document Vault Document
archiving and Analyst Support.
The SkyBOOKS program is
comprised of a series of color-coded
dashboards that logically and clearly
display all detailed aircraft technical
data, fleet overviews, and flight and
pilot currency tracking information.
This data is displayed to assist our
users with crew and maintenance
analysis, management planning, and
scheduling. All SkyBOOKS account
data is restricted via password
protected internet access. Access to
particular information is further easily
limited by the assignment of specific
SkyBOOKS user roles.
SkyBOOKS has been designed
to interface seamlessly with CTAFOS, thereby enabling users of both
8
Lt. Robert Morgan of the
Jacksonville, Florida Sheriffs Office
selected SkyBOOKS to support his
operations fleet of 3 Bell Jet rangers
and a fixed wing aircraft. His primary
concern was maintaining mission
compliance for both flight crews and
aircraft during a period of increasing
budget cuts. Lt. Morgan found that the
Sheriffs Office could outsource many
of its air fleets quality administrative
functions to SkyBOOKS more efficiently
and at a lower cost basis than
maintaining a dedicated internal staff
member.
RVR Air Charter President, Ron
Whitehead said, we need a single
compliance and maintenance tracking
program that can address the entire
fleet of aircraft we operate and that will
provide us fleet visibility to maintenance
compliance on a large fleet of very
complex aircraft. The FAA has a keen
interest in ensuring we are using a single
intuitive system supporting our entire
fleet. SkyBOOKS dashboard reporting
will make that task easier.
Scott Runyan, President of
Helicopter Express, believes that
SkyBOOKS will provide visibility to our
widely geographically dispersed fleet
and provide us real time condition
insight, allowing us better planning and
management of our fleet. SkyBOOKS
will help mitigate risk for remotely
operated aircraft, and the warranty
tracking capability will allow cost
recovery that previously did not exist.
SkyBOOKS customers indicate that
they find the system to be very intuitive
and the analyst support personal,
accommodating, and very responsive.
For example, customers can simply
send a copy of the Return to Service
documents via fax or email to their
aircraft analyst, who will immediately
update the system maintenance event
schedule and load all supporting
documents into the on-line vault.
Trained users may perform most of the
updates to their account personally,
relying on their SkyBOOKS analyst to
provide quality control and confirm
the accuracy and actions initiated by
system updates.
Beginning this fall, new Bell
helicopters will be delivered with all
historic information, modification center
Visit www.skybooks.com or contact
sales@skybooks.com for an introductory
overview of the SkyBOOKS technology,
or, if you prefer, call SkyBOOKS at
(866) 929-8700 or your Bell Ship Sales
representative to arrange an individual
demonstration today.
LOCATION
October 16-17
CITY/STATE
Energy Conservation:
Human Factors
Maintenance Error
Management
By Danny Saucier, Customer Support Area Manager
Upcoming Tradeshows
Bell Helicopter will be participating in the following
tradeshows. Please plan to come by and see us.
AUSA
NBAA
AMTC
RotorBreeze
Subscriptions
If you have had a change
of address or wish to have your
name added or deleted from the
RotorBreeze distribution list, please
notify the editor, Leslie Ferry, at:
Bell Helicopter
Customer Support
& Services
ATTN: LESLIE FERRY
P.O. Box 482
Fort Worth, TX 76101
FAX: (817) 278-0053
or email:
laferry@bellhelicopter.textron.com
Est. 1951
PRIORITY MAIL
U.S. POSTAGE
PAID
FT WORTH, TX
PERMIT NO. 1859