GATE 2015 CH Syllabus

37
Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid

wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery,
treatment and disposal).
Noise Pollution: Impacts of noise, permissible limits of noise pollution, measurement of
noise and control of noise pollution.
Transportation Engineering
Highway Planning: Geometric design of highways, testing and specifications of paving
materials, design of flexible and rigid pavements.
Traffic Engineering: Traffic characteristics, theory of traffic flow, intersection design,
traffic signs and signal design, highway capacity.
Surveying
Importance of surveying, principles and classifications, mapping concepts, coordinate
system, map projections, measurements of distance and directions, leveling, theodolite
traversing, plane table surveying, errors and adjustments, curves.
5.5.7 Chemical Engineering (CH)
Engineering Mathematics
Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and eigenvectors.
Calculus: Functions of single variable, Limit, continuity and differentiability, Mean value
theorems, Evaluation of definite and improper integrals, Partial derivatives, Total
derivative, Maxima and minima, Gradient, Divergence and Curl, Vector identities,
Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Greens
theorems.
Differential equations: First order equations (linear and nonlinear), Higher order linear
differential equations with constant coefficients, Cauchys and Eulers equations, Initial and
boundary value problems, Laplace transforms, Solutions of one dimensional heat and wave
equations and Laplace equation.
Complex variables: Analytic functions, Cauchys integral theorem, Taylor and Laurent
series, Residue theorem.
Probability and Statistics: Definitions of probability and sampling theorems, Conditional
probability, Mean, median, mode and standard deviation, Random variables,
Poisson,Normal and Binomial distributions.
Numerical Methods: Numerical solutions of linear and non-linear algebraic equations
Integration by trapezoidal and Simpsons rule, single and multi-step methods for
differential equations.
Chemical Engineering
Process Calculations and Thermodynamics: Laws of conservation of mass and energy;
use of tie components; recycle, bypass and purge calculations; degree of freedom analysis.
38
First and Second laws of thermodynamics. First law application to close and open
systems.Second law and Entropy. Thermodynamic properties of pure substances: equation
of state and departure function, properties of mixtures: partial molar properties, fugacity,
excess properties and activity coefficients; phase equilibria: predicting VLE of systems;
chemical reaction equilibrium.
Fluid Mechanics and Mechanical Operations: Fluid statics, Newtonian and non-
Newtonian fluids, Bernoulli equation, Macroscopic friction factors, energy balance,
dimensional analysis, shell balances, flow through pipeline systems, flow meters, pumps
and compressors, packed and fluidized beds, elementary boundary layer theory, size
reduction and size separation; free and hindered settling; centrifuge and cyclones;
thickening and classification, filtration, mixing and agitation; conveying of solids.
Heat Transfer: Conduction, convection and radiation, heat transfer coefficients, steady and
unsteady heat conduction, boiling, condensation and evaporation; types of heat exchangers
and evaporators and their design.
Mass Transfer: Ficks laws, molecular diffusion in fluids, mass transfer coefficients, film,
penetration and surface renewal theories; momentum, heat and mass transfer analogies;
stage-wise and continuous contacting and stage efficiencies; HTU & NTU concepts design
and operation of equipment for distillation, absorption, leaching, liquid-liquid extraction,
drying, humidification, dehumidification and adsorption.
Chemical Reaction Engineering: Theories of reaction rates; kinetics of homogeneous
reactions, interpretation of kinetic data, single and multiple reactions in ideal reactors, non-
ideal reactors; residence time distribution, single parameter model; non-isothermal
reactors; kinetics of heterogeneous catalytic reactions; diffusion effects in catalysis.
Instrumentation and Process Control: Measurement of process variables; sensors,
transducers and their dynamics, transfer functions and dynamic responses of simple
systems, process reaction curve, controller modes (P, PI, and PID); control valves; analysis
of closed loop systems including stability, frequency response and controller tuning,
cascade, feed forward control.
Plant Design and Economics: Process design and sizing of chemical engineering
equipment such as compressors, heat exchangers, multistage contactors; principles of
process economics and cost estimation including total annualized cost, cost indexes, rate of
return, payback period, discounted cash flow, optimization in design.
Chemical Technology: Inorganic chemical industries; sulfuric acid, NaOH, fertilizers
(Ammonia, Urea, SSP and TSP); natural products industries (Pulp and Paper, Sugar, Oil, and
Fats); petroleum refining and petrochemicals; polymerization industries; polyethylene,
polypropylene, PVC and polyester synthetic fibers.
5.5.8 Computer Science and Information Technology (CS)
Engineering Mathematics
Mathematical Logic: Propositional Logic; First Order Logic.
Probability: Conditional Probability; Mean, Median, Mode and Standard Deviation; Random
Variables; Distributions; uniform, normal, exponential, Poisson, Binomial.

GATE 2015 CH Syllabus

Uploaded by

Copyright:

Available Formats

GATE 2015 CH Syllabus

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GATE 2015 CH Syllabus

Uploaded by

Copyright:

Available Formats

37

Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid

You might also like