Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 70 views

    8.5.1 - Lab Cisco

    Uploaded by

    jurley187
    This document contains configuration files for three routers - R1, R2, and R3. R1 is configured with two FastEthernet interfaces connecting to subnets 192.168.10.0 and 192.168.11.0. It has a Serial interface connecting to R2 over Frame Relay. R2 has a FastEthernet interface to subnet 192.168.20.0 and connects to R1 and R3 over Serial interfaces using Frame Relay. R3 connects to R2 over Serial and has two VLAN subinterfaces for subnets 192.168.11.0 and 192.168.30.0. RIP routing is configured between the routers with authentication. Access control lists are configured for routing, NAT,

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd

    8.5.1 - Lab Cisco

    Uploaded by

    jurley187
    70 views5 pages
    This document contains configuration files for three routers - R1, R2, and R3. R1 is configured with two FastEthernet interfaces connecting to subnets 192.168.10.0 and 192.168.11.0. It has a Serial interface connecting to R2 over Frame Relay. R2 has a FastEthernet interface to subnet 192.168.20.0 and connects to R1 and R3 over Serial interfaces using Frame Relay. R3 connects to R2 over Serial and has two VLAN subinterfaces for subnets 192.168.11.0 and 192.168.30.0. RIP routing is configured between the routers with authentication. Access control lists are configured for routing, NAT,

    Original Description:

    Atividade 8.5.1: Identificação e solução de problemas de rede da empresa 1

    Original Title

    8.5.1 - lab cisco

    Copyright

    © © All Rights Reserved

    Available Formats

    TXT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains configuration files for three routers - R1, R2, and R3. R1 is configured with two FastEthernet interfaces connecting to subnets 192.168.10.0 and 192.168.11.0. It has a Serial interface connecting to R2 over Frame Relay. R2 has a FastEthernet interface to subnet 192.168.20.0 and connects to R1 and R3 over Serial interfaces using Frame Relay. R3 connects to R2 over Serial and has two VLAN subinterfaces for subnets 192.168.11.0 and 192.168.30.0. RIP routing is configured between the routers with authentication. Access control lists are configured for routing, NAT,

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    70 views5 pages

    8.5.1 - Lab Cisco

    Uploaded by

    jurley187
    This document contains configuration files for three routers - R1, R2, and R3. R1 is configured with two FastEthernet interfaces connecting to subnets 192.168.10.0 and 192.168.11.0. It has a Serial interface connecting to R2 over Frame Relay. R2 has a FastEthernet interface to subnet 192.168.20.0 and connects to R1 and R3 over Serial interfaces using Frame Relay. R3 connects to R2 over Serial and has two VLAN subinterfaces for subnets 192.168.11.0 and 192.168.30.0. RIP routing is configured between the routers with authentication. Access control lists are configured for routing, NAT,

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    of 5

    R1

    hostname R1
    !boot-start-markerboot-end-marker
    !security passwords min-length 6enable secret 5 ciscoccna
    !ip cef
    !ip dhcp pool Access1
    network 192.168.10.0 255.255.255.0
    default-router 192.168.10.1
    !
    no ip domain lookup
    frame-relay switching
    !key chain RIP_KEY
    key 1key-string cisco
    username R3 password 0 ciscoccna
    username ccna password 0 ciscoccna
    !
    interface FastEthernet0/0
    ip address 192.168.10.1 255.255.255.0
    ip rip authentication mode md5
    ip rip authentication key-chain RIP_KEY
    duplex auto
    speed auto
    !
    interface FastEthernet0/1
    ip address 192.168.11.1 255.255.255.0
    ip rip authentication mode md5
    ip rip authentication key-chain RIP_KEY
    duplex auto
    speed auto
    !interface Serial0/0/0
    ip address 10.1.1.1 255.255.255.252
    ip rip authentication mode md5
    ip rip authentication key-chain RIP_KEY
    encapsulation frame-relay
    no keepalive
    clockrate 128000
    frame-relay map ip 10.1.1.1 201
    frame-relay map ip 10.1.1.2 201 broadcast
    no frame-relay inverse-arp
    frame-relay intf-type dce
    !
    interface serial0/0/1
    ip address 10.3.3.1 255.255.255.252
    ip rip authentication mode md5
    ip rip authentication key-chain RIP_KEY
    encapsulationp ppp
    ppp authentication chap!
    !
    router rip
    version 2
    passive-interface default
    no passive-interface FastEthernet0/0
    no passive-interface FastEthernet0/1
    no passive-interface Serial0/0/0
    no passive-interface Serial0/0/1
    network 10.0.0.0

    network 192.168.10.0
    network 192.168.11.0
    no auto-summary
    !
    ip classless
    !
    ip http server
    !
    ip access-list standard Anti-spoofing
    permit 192.168.10.0 0.0.0.255
    deny any
    ip access-list standard VTY
    permit 10.0.0.0 0.255.255.255
    permit 192.168.10.0 0.0.0.255
    permit 192.168.11.0 0.0.0.255
    permit 192.168.20.0 0.0.0.255
    permit 192.168.30.0 0.0.0.255
    !
    line con 0
    exec-timeout 5 0
    logging synchronous
    line aux 0line vty 0 4access-class VTY inlogin local!end
    ________________________________________________________________________________
    _________
    hostname R2
    !
    security passwords min-length 6
    enable secret ciscoccna
    !aaa new-model
    !aaa authentication login local_auth local
    aaa session-id common
    !ip cef
    !no ip domain lookup
    !!key chain RIP_KEY
    key 1
    key-string cisco
    username ccna password 0 ciscoccna
    !interface Loopback0
    ip address 209.165.200.245 255.255.255.224
    !

    interface FastEthernet0/1
    ip address 192.168.20.1 255.255.255.0
    ip access-group TFTP out
    ip access-group Anti-spoofing in
    ip nat outside
    duplex auto
    speed auto
    !
    interface FastEthernet0/0
    no ip address
    shut down
    duplex auto
    speed auto
    !
    interface Serial0/0/0
    ip address 10.1.1.2 255.255.255.252

    ip nat inside
    encapsulation frame-relay
    no keepalive
    frame-relay map ip 10.1.1.1 201 broadcast
    frame-relay map ip 10.1.1.2 201
    no frame-relay inverse-arp
    !
    interface Serial0/0/1
    ip address 10.2.2.1 255.255.255.252
    ip access-group R3-telnet in
    ip nat inside
    ip rip authentication mode md5
    ip rip authentication key-chain RIP_KEY
    clockrate 128000
    !
    !
    router rip
    version 2
    passive-interface default
    no passive-interface FastEthernet0/1
    no passive-interface Serial0/0/0
    no passive-interface Serial0/0/1
    network 10.0.0.0
    network 192.168.20.0
    default-information originate
    no auto-summary
    !
    ip classless
    ip route 0.0.0.0 0.0.0.0 209.165.200.226
    !
    no ip http server
    ip nat inside source list NAT interface FastEthernet0/0 overload
    !
    ip access-list standard Anti-spoofing
    permit 192.168.20.0 0.0.0.255
    deny any
    ip access-list standard NAT
    permit 10.0.0.0 0.255.255.255
    permit 192.168.0.0 0.0.255.255
    !
    ip access-list extended R3-telnet
    deny tcp host 10.2.2.2 host 10.2.2.1 eq telnet
    deny tcp host 10.3.3.2 host 10.2.2.1 eq telnet
    deny tcp host 192.168.11.3 host 10.2.2.1 eq telnet
    deny tcp host 192.168.30.1 host 10.2.2.1 eq telnet
    permit ip any any
    !
    ip access-list standard TFTP
    permit 192.168.20.0 0.0.0.255
    !
    control-plane
    !
    line con 0
    exec-timeout 5 0
    logging synchronous
    line aux 0
    exec-timeout 15 0
    logging synchronous

    login authentication local_auth


    transport output telnet
    line vty 0 4exec-timeout 15 0
    logging synchronous
    login authentication local_auth
    transport input telnet
    !
    end
    __________________________________________________________________________
    hostname R3
    !
    security passwords min-length 6
    enable secret ciscoccna
    !
    no aaa new-model
    !
    ip cef!no ip domain lookup
    !!
    key chain RIP_KEY
    key 1key-string cisco
    username R1 password 0 ciscoccna
    username ccna password 0 ciscoccna
    !
    interface FastEthernet0/1
    no ip address
    duplex auto
    speed auto
    !
    interface FastEthernet0/1.11
    encapsulation dot1Q 11
    ip address 192.168.11.3 255.255.255.0
    ip rip authentication mode md5
    ip rip authentication key-chain RIP_KEY
    no snmp trap link-status
    !
    interface FastEthernet0/1.30
    encapsulation dot1Q 30
    ip address 192.168.30.1 255.255.255.0
    ip rip authentication mode md5
    ip rip authentication key-chain RIP_KEY
    ip access-group Anti-spoofing in
    no snmp trap link-status
    !
    !interface Serial0/0/0
    ip address 10.3.3.2 255.255.255.252
    ip rip authentication mode md5
    ip rip authentication key-chain RIP_KEY
    encapsulation ppp
    clockrate 125000
    ppp authentication chap
    !
    interface Serial0/0/1
    ip address 10.2.2.2 255.255.255.252
    ip rip authentication mode md5
    ip rip authentication key-chain RIP_KEY
    !
    router rip
    version 2

    passive-interface default
    no passive-interface FastEthernet0/1.11
    no passive-interface FastEthernet0/1.30
    no passive-interface Serial0/0/0
    no passive-interface Serial0/0/1
    network 10.0.0.0
    network 192.168.11.0
    network 192.168.30.0
    no auto-summary
    !
    ip classless
    !
    ip http server
    !
    ip access-list standard Anti-spoofing
    permit 192.168.30.0 0.0.0.255
    deny any
    ip access-list standard VTY
    permit 10.0.0.0 0.255.255.255
    permit 192.168.10.0 0.0.0.255
    permit 192.168.11.0 0.0.0.255
    permit 192.168.20.0 0.0.0.255
    permit 192.168.30.0 0.0.0.255
    !
    control-plane
    !
    line con 0exec-timeout 5 0
    logging synchronous
    line aux 0exec-timeout 15 0
    logging synchronousline vty 0 4
    access-class VTY inexec-timeout 15 0
    logging synchronous
    login local
    !end

    You might also like