GPS102B User Manual
GPS102B User Manual
GPS102B User Manual
MANUAL TK-102B
Preface
Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly.
1
Make sure to read this manual carefully before using this product. Please note that specification and
information are subject to changes without prior notice in this manual. Any change will be integrated in the
latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
Content
1. Summary.............................................................................................................................................................3
2 Applications..........................................................................................................................................................3
3 Hardware Description..........................................................................................................................................3
3.1 Front face ..........................................................................................................................................................3
3.2 Rear face
..3
1. Summary
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and
monitor any remote targets by SMS or internet.
2 Applications
Vehicle rental / Fleet management etc
Powerful magnet+water proof, adsorbing in the hidden place of car.
Protect child / the old / the disabled / pet etc
Provide peace-of-mind for businessmen
Manage personnel
Track criminals secretly
3 Hardware Description
ON /OFF Button
Microphone
3.5 Interior
4 Specs.
Content
Dim.
Weight
Network
Band
GPS chip
GPS sensitivity
GPS accuracy
Time To First Fix
Specs.
64mm x 46mm x 17mm(1.8*2.5*0.65)
50g
GSM/GPRS
850/900/1800/1900Mhz
SIRF3 chip
-159dBm
5m
Cold status 45s
Warm status 35s
Hot status 1s
Car charger
1224V input
5V output
Wall charger
110220V input
5V output
Chargeable changeable 3.7V 800mAh Li-ion battery
80hours
-40C to +85C
-20C to +55C
5%--95% non-condensing
Battery
Standby
Storage Temp.
Operation Temp.
Humidity
5 Usage
5.1 SIM card installation
Make sure that there is no call transfer and call display is on, and PIN code off. The SMS
message must in Text format, cant be identified for PDU format.
Steps:
1 Open the rear cover, and pick out the battery.
4
3 Put the SIM card into the holder, and turn the foil right and fasten it in place.
5.3 Startup
Put the SIM card and battery in place.
Turn on the unit outdoors by pressing the on/off button until the indicator is on.
For first use, please initialize the unit and restore it to default setting. (Please refer to 5.4 for
instruction.)
In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the
GPS signals. The indicator will keep flashing every 4 seconds when the unit has received
the signals, otherwise it will keep on.
When this unit receives GPS signals normally, you can use it and do all the following
settings.
5.4 Initialization
Send begin+password in SMS to the unit, it will reply begin ok and initialize all the
settings. (Default password: 123456)
For example, send SMS begin123456 to the tracker via a cell phone, If succeeded,
begin OK is returned by the device in SMS. If there is something wrong then SMS begin
fail is received, check out the format of commands sent and password as well.
Attention, begin+123456,the symbol+ in the following, please don't add + in
SMS, only begin123456 in SMS. This description is only for quick understand.
same argument, space not the word space, it means press the spacebar button.
5.6 Authorization
There are only 5 numbers able to be authorized.
5.6.1 Call the tracker for 10 times, it will make the cell phone number as the authorized number
automatically.
5.6.2 Send SMS admin+password+space+cell phone number to set up a authorized number.
The other authorized numbers should be set by the first authorized number. If the number is
successfully authorized, the unit will reply admin ok! in SMS.
5.6.3 Send SMS noadmin+password+space+authorized number to delete the authorized
number.
5.6.4 For roaming purpose, you have to add your country code ahead of the cell phone number,
for example, please send admin123456 008613322221111 to tracker to set 13322221111 as an
authorized number.
info; If there is already an authorized number, then it will not respond when an unauthorized
number calls it up.
5.7.2 When an authorized number dials up the unit, it will hang up and report a real-time Geo-
info as below:
*Tracking location, the SMS information about the lat./long. Received is the place received the GPS
signal when the GPS signal is weak. Please check the time received the SMS if there are some errors
of the location.
monitor mode.
7
5.11.3. Send SMS tracker+password to the unit, it will reply tracker ok! and restore to track
mode.
5.12 Storage
5.12.1 Auto Storage When the tracker devices lost GSM signals or fall offline from GPRS,
tracker will store the tracking position and alerts automatically in the flash upon the pre-set
condition, when GSM signals get back, all the event alerts will be auto-sent to the authorized
numbers or monitoring platform (server), but the stored tracking data should be loaded to the
monitoring platform via SMS command.
5.12.2 Storage upon times: Send SMS: save030s005n+password to the tracker unit, it will
reply save ok, and will store the lat, long locations every 30 seconds for 5 times. (S: second,
m: minute; h: hour).
5.12.3 Multi-Storage Send sms:save030s***n+ password to tracker device, it will reply
save ok.
5.12.4: Storage Clearance: send SMS: clear+ password to tracker device, it will reply clear
ok.
5.12.5Storage Volume: The Max Storage of the memory can store 16,000 tracking locations,
and can be copy to computers directly through the USB cable.
5.14 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the
message to the authorized numbers when it breaches the district.
5.14.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send
SMS stockade+password+space+latitude,longitude; latitude,longitude to unit to set the
restricted district. In case of breach, it will send SMS stockade!+geo-info to the authorized
numbers.
Remark: The first latitude&longitude is coordinate of the top left corner of the Geo-fence, while
the second latitude&longitude is the coordinate of the bottom right corner. It will alarm one
time in each setting.
5.14.2 Cancel: Send SMS nostockade+password to deactivate this function.
This function will be out of effect after the unit moves outside the district.
5.24 User manual of web based and PC installation monitor software includes
in the CD in the package box. [Software Platform User Manual]
10
6 .Cautions
Please comply with the instructions to extend the unit life:
1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.
2. Dont use & store the unit in dusty places.
3. Dont put the unit in overheated or overcooled places.
4. Handle carefully. Dont vibrate or shake it violently.
5. Clear the unit with a piece of dry cloth. Dont clean in chemicals, detergent.
6. Dont paint the unit, this may cause some foreign materials left in between the parts.
7. Dont disassemble or refit the unit.
8. Please use the battery and charger provided by manufacturer. Using other batteries and chargers will cause unwanted
situation.
Solution
Startup Fail
Hangup Fail
No GSM Signals
Please make sure SIM Card is GSM Net and installed correctly;
also call display should be on; but no call transfer and PIN code off.
11