Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
106 views

Convert Bitmap

This document provides instructions for creating a bitmap image to display on a graphics LCD, including converting an image file to hexadecimal format and properly formatting the data for inclusion in a program. The key steps are: 1) Create the image in a paint program at the exact pixel size of the LCD. 2) Convert the image file to uncompressed TIFF format. 3) Use a binary to hexadecimal conversion program to change the file to hex. 4) Format the hexadecimal data in the source code file with bytes spaced and grouped properly to display on the LCD.

Uploaded by

OrbitrosOrbtial
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
106 views

Convert Bitmap

This document provides instructions for creating a bitmap image to display on a graphics LCD, including converting an image file to hexadecimal format and properly formatting the data for inclusion in a program. The key steps are: 1) Create the image in a paint program at the exact pixel size of the LCD. 2) Convert the image file to uncompressed TIFF format. 3) Use a binary to hexadecimal conversion program to change the file to hex. 4) Format the hexadecimal data in the source code file with bytes spaced and grouped properly to display on the LCD.

Uploaded by

OrbitrosOrbtial
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Application Note

Crystal Clear and Visibly Superior LCD Modules

A Simple Way to Create Bitmap Images


for Graphics LCD's
Introduction:
It is often necessary to create a bitmap image to be displayed on a graphics LCD. This may be a
background image over which text is displayed or other changeable information. It may be a likeness of
a front panel with switches or a map with touch areas. Images such as these are best generated in a
"paint" program, but moving the image from the paint program to a source code document can be
problematic. This application note describes a relatively simple way of producing such an image and
making it ready for inclusion in a program.
The example here prepares and formats the image for inclusion in an assembly code document but can
easily be adapted for inclusion in a "C" program. The image is formatted in a way that is compatible
with most LCD controllers such as the Toshiba T6963C or the Epson/S-MOS SED1330/1335. Some
low-end LCD controllers such as the Epson/S-MOS SED1520 or the Hitachi HD61202 use a paging
scheme to map data to the display and do not lend themselves to this method or to the display of full
screen bitmap images in general.
Creating the Image:
There are a number of paint programs available on the market and a simple one is usually bundled with
the operating system of most computers. Start by setting up a canvas that is the exact size, in pixels, of
your LCD. Set the color pallet for 2 color or black and white. You can now generate your image.
When the image is complete, save it in uncompressed TIFF (.tif) format. After the following conversion
the image will be correct for a negative mode display. A white pixel will be a logical 1 and a black pixel
will be a logical 0 in the image file. A logical 1 will turn "on" a pixel on the LCD display. If the display is a
positive mode type the image will look like a photographic negative. For this type of display it will be
necessary to "flip" the image in the paint program before saving it. Most paint programs have a
command to do this. It is called "flip" or "convert to negative" or something similar.
Converting the Image from Binary to Hexadecimal:
It is possible to include the straight binary code in a program but it would take up an inordinate amount
of space. It is more conventional to represent binary data in hexadecimal form. To convert the TIFF file,
which is in binary format, to hexadecimal format we can use a simple freeware program called
bin2hex.exe. This program is available for downloading from the Hantronix Web site at
"www.hantronix.com".
To do the conversion you must change the ".tif" extension to ".bin". Then run the program from DOS or
a DOS window with the command line: <bin2hex filename.bin filename.hex>. The conversion program
will create a new file with the extension ".hex".

Page 1

Application Note
Crystal Clear and Visibly Superior LCD Modules

Formatting the Image Data:


The image file is now a text file which can be opened with any word processor. The data will be 2 digit
ASCII coded hex bytes with a space between each byte and 16 bytes per line.
a3 ef 01 00 04 96 9a 8c cc bd ff ff 50 67 15 16
Delete the first 25 bytes of the file. This is the TIFF header and will not be used. Use the REPLACE
command in your word processor to reformat the data to fit your assembler or compiler. An example of
the line above reformatted for an assembler is shown below.
db
db

0a3h,0efh,001h,000h,004h,096h,09ah,08ch
0cch,0bdh,0ffh,0ffh,050h,067h,015h,016h

The image data can now be placed into your source file.
The data is formatted as shown below. This example applies to a 128x128 LCD display.

2ND BYTE

1ST BYTE
D0 D1 D2 D3 D4 D5 D6 D7 D0 D1

129TH BYTE

As a "reality check" the first byte of data in the above example would be displayed as shown below on a
positive mode display.

1ST BYTE
D0 D1 D2 D3 D4 D5 D6 D7

= 0a3h

Page 2

You might also like