Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 136 views

    Mill Specification

    Uploaded by

    Anonymous SkU7Py
    This document provides specifications for cold-rolled and hot-rolled steel plates, including classifications, standards, structural quality grades, yield points and tensile strengths, coating weights, and thickness tolerances. It lists various steel plate types classified by standards organizations and their minimum properties. Tolerances for plate thickness are provided according to plate thickness and width.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Mill Specification

    Uploaded by

    Anonymous SkU7Py
    136 views3 pages
    This document provides specifications for cold-rolled and hot-rolled steel plates, including classifications, standards, structural quality grades, yield points and tensile strengths, coating weights, and thickness tolerances. It lists various steel plate types classified by standards organizations and their minimum properties. Tolerances for plate thickness are provided according to plate thickness and width.

    Original Description:

    Specification for G.I

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for cold-rolled and hot-rolled steel plates, including classifications, standards, structural quality grades, yield points and tensile strengths, coating weights, and thickness tolerances. It lists various steel plate types classified by standards organizations and their minimum properties. Tolerances for plate thickness are provided according to plate thickness and width.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    136 views3 pages

    Mill Specification

    Uploaded by

    Anonymous SkU7Py
    This document provides specifications for cold-rolled and hot-rolled steel plates, including classifications, standards, structural quality grades, yield points and tensile strengths, coating weights, and thickness tolerances. It lists various steel plate types classified by standards organizations and their minimum properties. Tolerances for plate thickness are provided according to plate thickness and width.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Specifications

    - Using Cold-Rolled Steel Plate


    Standards
    Classification
    General Use
    Lock Forming
    Drawing
    Deep Drawing
    Non-aging (stabilized) deep drawing
    Non-aging extra deep drawing

    Structural Quality1)

    High Strength Steel

    POSCO KS D 3506 JIS G3302


    CGCC
    CGCF
    CGCD
    CGCP
    CGCN
    CGCE
    CGL 35
    CGC 41
    CGC 45
    CGC 50
    CGC 58
    CGCHS 35
    CGCHS 40
    CGCHS 45
    CGCHS 50
    CGCHS 60

    SGCC
    SGCD 1
    SGCD 2
    SGCD 3
    SGCD 3N
    SGC 35
    SGC 41
    SGC 45
    SGC 50
    SGC 58

    SGCC
    SGCD 1
    SGCD 2
    SGCD 3
    SGCD 3N
    SGC 340
    SGC 400
    SGC 440
    SGC 490
    SGC 570

    ASTM
    89
    95
    A 526
    A 653-CQ
    A 527
    A 653-LFQ
    A 528
    A 653-DQ
    A 642
    A 653-DQSK
    A446 Gr A2) A 653-SQ230
    A446 Gr B A 653-SQ255
    A446 Gr C A 653-SQ275
    A446 Gr D A 653-SQ340
    A446 Gr F
    A446 Gr E A 653-SQ550

    EN 10142
    DX51D
    DX52D
    DX53D
    DX54D
    S220 GD
    S250 GD
    S280 GD
    S320 GD
    S350 GD
    S550 GD

    -1) Size for EN Structural Quality is EN10147


    -2) The tensile strength of A446 Grade A is 310MPa (N/mm2)

    -Using Hot-Rolled Steel Plate


    Standards
    Classification
    Drawing
    General Use
    Lock Forming

    POSCO KS D 3506 JIS G3302

    ASTM

    CGHD
    CGHC
    SGHC
    SGHC
    CGH 35 SGH 340 SGH 340

    89
    A526-H
    A527-H
    -

    CGH 41 SGH 400 SGH 400

    Structural Quality CGH 45 SGH 440 SGH 440 A446-DH


    CGH 50 SGH 490 SGH 490 A446-FH
    CGH 55 SGH 540 SGH 540 A446-EMH
    CGH 58
    -Size for EN Structural Quality is EN10147

    95
    A653-CQ
    A653-LFQ
    A653HSQ275
    A653HSQ341
    A653HSQ343
    -

    EN 10142
    EN-DX51DH
    EN-S250GDH
    EN-S280GDH
    EN-S320GDH
    EN-S350GDH
    -

    Yield Point, Tensile Strength, Elongation


    - Using Cold-Rolled Steel Plate
    Yield Point
    Classification
    (min.
    N/mm2)
    SGCC
    SGCD1
    SGCD2
    SGCD3
    SGC340
    SGC400
    SGC440
    SGC490
    SGC570

    245
    295
    335
    365
    560

    Tensile
    Strength
    (min.
    N/mm2)
    270
    270
    270
    340
    400
    440
    490
    570

    0.25 and
    over, under
    0.40

    0.40 and
    over, under
    0.60

    20
    18
    18
    16
    -

    34
    36
    38
    20
    18
    18
    16
    -

    Elongation (min. %)
    Thickness (mm)
    0.60 and
    1.00 and
    over, under over, under
    1.00
    1.60
    36
    38
    40
    20
    18
    18
    16
    -

    Test Piece
    1.60 and
    over, under 2.50 and over
    2.50

    27
    39
    41
    20
    18
    18
    16
    -

    38
    40
    42
    20
    18
    18
    16
    -

    20
    18
    18
    16
    -

    No. 5
    Rolling
    Direction

    -1.When the anti-aging characteristics are featured in the SGCD3 sheets and coils, the anti-aging
    characteristics are guaranteed for six (6) months after shipment from the manufacturer
    -2.In principle, tensile strength tests are not performed on plates with thickness under 0.25mm

    - Using Hot-Rolled Steel Plate


    Classification

    Yield Point (min. N/mm2)

    Tensile Strength (min. N/mm2)

    Elongation (min. %)

    SGHC

    205

    270

    SGH340

    245

    340

    20

    SGH400

    295

    400

    18

    SGH440

    335

    440

    18

    SGH490

    365

    490

    16

    SGH540

    400

    540

    Test Piece

    No. 5 Rolling
    Direction

    Coating Weight
    - Minimum Coating Weight (both-sided coating)
    Coat Weight Type
    60
    80
    100
    120
    180
    200
    220
    250
    275
    350
    450
    600

    Average value of Double- Average value of Doublesided, Triple Spots


    sided, Single Spot
    Method
    Method
    60
    51
    80
    68
    100
    85
    120
    102
    180
    153
    200
    170
    220
    187
    250
    213
    275
    234
    350
    298
    450
    383
    600
    510

    ASTM
    KS D 3506

    JIS G 3302

    POSCO

    (Z06), F06
    Z08, F08
    Z10, F10
    Z12, F12
    Z18, (F18)
    Z20
    Z22
    Z25
    Z27
    Z35
    Z45
    Z60

    (Z06), F06
    Z08, F08
    Z10, F10
    Z12, F12
    Z18, (F18)
    Z20
    Z22
    Z25
    Z27
    Z35
    Z45
    Z60

    K060, S060
    K080, S080
    K100, S100
    K120, S120
    K180
    K200
    K220
    K250
    K270
    K350
    K450
    K600

    -For non-alloy products, Z is added in front for KS and JIS and K for POSCO products. For alloy products, F is
    added in front for KS and JIS and S for POSCO products
    -Coat weight types Z35, Z45, Z60, F10, F12 and F18 are not applied to screw type 1,2 and 3
    -For both-sides, triple spots coating weight, the average value of the measurement of 3 test pieces is applied
    -For one-side, single spot coating weight, the minimum value of the measurement of 3 test pieces is applied
    -Separate consultation is available for the maximum coating weight on both sides

    Thickness Tolerances
    - Using Cold-Rolled Steel Plate
    (Unit : mm)

    Thickness
    Under 0.25
    0.25 and over, under 0.40
    0.40 and over, under 0.60
    0.60 and over, under 0.80
    0.80 and over, under 1.00
    1.00 and over, under 1.25
    1.25 and over, under 1.60
    1.60 and over, under 2.00
    2.00 and over, under 2.50
    2.50 and over, under 3.15
    3.15 and over

    630 or under

    630 and over,


    under 1,000

    0.04
    0.05
    0.06
    0.07
    0.07
    0.08
    0.09
    0.11
    0.13
    0.15
    0.17

    0.04
    0.05
    0.06
    0.07
    0.07
    0.08
    0.10
    0.12
    0.14
    0.16
    0.20

    Width
    1,000 and over, 1,250 and over,
    1,600 and over
    under 1,250
    under 1,600
    0.04
    0.05
    0.06
    0.07
    0.08
    0.09
    0.11
    0.13
    0.15
    0.17
    0.20

    0.06
    0.07
    0.07
    0.09
    0.10
    0.12
    0.14
    0.16
    0.18
    0.21

    0.08
    0.08
    0.10
    0.12
    0.14
    0.16
    0.18
    0.21
    -

    - Using Hot-Rolled Steel Plate


    (Unit : mm)

    Thickness
    1.60 and over, under 2.00
    2.00 and over, under 2.50
    2.50 and over, under 3.15
    3.15 and over, under 4.00
    4.00 and over, under 5.00
    5.00 and over, under 6.00
    6.00 and over

    Under 1,200
    0.17
    0.18
    0.20
    0.22
    0.25
    0.27
    0.30

    * Applied to under 2,000mm width

    Width
    1,200 and over, 1,500 and over,
    under 1,500
    under 1,800
    0.18
    0.19
    0.20
    0.22
    0.22
    0.25
    0.24
    0.27
    0.27
    0.27
    0.31
    -

    1,800 and over,


    2,300 or under
    0.22*
    0.26*
    0.27*
    0.28*
    -

    You might also like