40 T Crawler PDF
40 T Crawler PDF
40 T Crawler PDF
GTC-400EX
FEATURES
No other crane combines so many
valuable features:
Pick-and-carry the full crane load chart through 360.
Lift and walk...even with tracks retracted.
Climb steeper grades, thanks to minimized counterweight and low
center of gravity.
Pull through deep mud without bogging down.
Telescope or lift the boom with a full load on the hook.
Save time and money on the job due to low clearance height, retract
on-the-fly tracks and telescopic boom.
Independent hydrostatic track drives allow pivot turns
and counter rotation.
Hydraulic tool circuit option powers wide choice of Mantis-approved
tools.
New luxury cab with state-of-the-art operator aids.
Saves time and money on deployment and shipping with less haul
vehicles, less time wasted on boom erection and fewer personnel on
the erection crew.
Spacious cab, adjustable seat, and conveniently located controls are common in all
Tadano Mantis Cranes.
GTC-400EX
ON THE JOB
The Tadano Mantis GTC-400EX combines rugged dependability with increased
capacity and reach. Based upon performance-proven components and
fabrications, the GTC-400EX is assured of the same bullet-proof reputation of
its peers. Rated at 40t lifting capacity at 3m radius, the Tadano Mantis GTC400EX is the envy of its imitators.
Like all Mantis cranes, the GTC-400EX is purpose-designed from the groundup, not an assortment of pieces borrowed from other products.
For its size and power, the GTC-400EX has an extraordinarily low center of
gravity with a minimum overhead clearance height of just 3.05m. And
like all Tadano Mantis cranes, the GTC-400EX doesnt depend upon massive
counterweighting for its strength for big counterweights are a liability when
climbing grades!
The GTC-400EX can walk with full boom and jib deployed, delivering an
impressive 48.5m maximum tip height. Such is the stability of the GTC-400EX
that it can operate with the fully telescoped main boom laid out completely
horizontal!
The ability to telescope the boom under full load simplifies the handling and
placement of heavy concrete poles.
Low ground pressure, fast travel speed, easy boom deployment, and an auger onboard make
the crane an ideal machine for use in many applications. Above Picture shows installation of
optional complete auger kit.
GTC-400EX
DIMENSIONS
Principal Dimensions
Overall Width
Area
Ground
Pressure
Working
Weight
Length
(Counterweight Removed)
13,02 m
2,46 m
2,46 m
Track Length
5,79 m
Boom Length to
CL Rotation
9,40 m
Tailswing
3,91 m
Overall Length
13,29 m
2,54 m
Track Height
1 067 mm
Ground Clearance
330 mm
1219 mm
3,05 m
Track Width
900 mm
Retracted
Extended
610 mm
3.35 m
5.22 m
6.04 m
0.68 kg/cm
40,800 kg
760 mm
3.51 m
5.39 m
7.55 m
0.51 kg/cm
41,700 kg
Overall Width
(Tracks Retracted)
3,66 m
900 mm
3.66 m
5.59 m
9.06 m
0.47 kg/cm
42,590 kg
5,59 m
* Crane equipped with: 32m boom, extension, jib 40t hook block, 11t headache ball
Specifications
GTC-400EX
CRANE SPECIFICATION
Boom
SUPERSTRUCTURE
Frame
Operators Cab
Fully-enclosed, air conditioned all-steel modular cab with lockable swinging door,
acoustical lining, anti-slip floor and tinted safety glass.
Sliding windows located in the cab door and cab boom side.
Vent window in the rear of the cab.
Grab bars and steps are located for easy access to the cab.
Rear view cameras are appropriately located as are three remote control work lights.
2-speed windshield wiper, top glass wiper
Defroster, heater, circulating fan
Six-way adjustable fabric seat with headrest, seat belt
Dome light
Dry-chemical fire extinguisher.
Dash instrumentation: tachometer, voltmeter, oil pressure gauge, temperature gauge,
hour meter and fuel gauge. Indicators are provided for crane level, load moment, drum
rotation, air filter restriction, hydraulic oil temperature and filter restriction, engine oil
pressure and temperature.
Seat and armrest termination switches immediately disable all hydraulic functions as
the operator rises from the seat or lifts the left hand armrest.
Two-way hydraulic armrest mounted joysticks control swing, auxiliary winch, main
winch and boom hoist. Four two-way hydraulic foot pedals control the travel, boom
extend, and swing service brake functions.
Adjustable hand and foot throttles
Counterweight
The 6804 kg single piece counterweight can be removed and installed via a pendant
attached to the boom.
Swing
Gear motor driving a planetary gear reducer with a shaft mounted pinion,
external gear shear ball slew bearing bolted to the superstructure and the carbody
allows the superstructure to rotates 360
Free Swing system
Swing Speed: Up to 3 rpm
Swing Parking brake: Spring applied failsafe brake with hydraulic release that is
controlled from the operators cab
Swing Service Brake: Hydraulically applied controlled throught foot actuated pedal
House lock system:
2-position manually pinned
Lubrication system: Cab mounted grease applicator
Fuel System
Capicity:
303 liter
Filtration: Inline fuel/water separator and engine mounted fuel filter.
Hydraulic System
Hydraulic Pumps: Two high pressure, variable axial piston pumps with load
sense and torque limiting control for crane functions.
Directional Valves: Multiple pressure and flow compensated valves with
integrated relief valves controlled by hydraulic pilot signals.
Pump output: 605 liter/min @ 2100 RPM engine speed. 330 bar
maximum pressure
Reservior: 1,136 liter capacity, spin-on filler/breather, sight gauge,
cleanout, and sump drain.
Filtration: 5 micron, full flow tank mounted return filters with electrical
clogging indicator; 5 micron pilot oil in-line pressure filter
with electrical clogging indicator.
Diagnostic Ports:
Provided for system, load sense, and pilot pressure.
Specifications
GTC-400EX
UNDERCARRIAGE
OPTIONAL EQUIPMENT
Carbody
Boom Extension: Lattice type, swingaway, stores along boom base section
and can be used with or without optional jib, One of two
parts of line may be reeved,
Length:
9,10m
Head: Two, 483 mm diameter cast nylon sheaves on heavy-duty
roller bearings
Maximum Lifting Height: 41,2m
The steel box type carbody is fabricated with square axles to accept the crawler side
frames. The top surface is precision machined to receive the swing bearing.
Side Frames
Two welded steel side frames are paired with a track group. The side frames extend
and retract hydraulically and are controlled from the cab.
Track Rollers: Two top and thirteen bottom sealed rollers on each track
frame
Idler:
Oil filled, self lubricating with spring type tensioner
Track Shoes:
900mm 3-bar semi grouser (standard)
760mm 3-bar semi grouser (optional)
610mm 3-bar semi grouser (optional)
760mm flat shoe (optional)
Travel
Each side frame contains a pilot controlled, two-speed track drive with hydraulic axial
piston motor and parking brake. Travel system provides skid steering and counter
rotation.
Low travel speed:
1,5 km/h
High travel speed :
2,5 km/h
Gradeability (unladen): 68%
Boom Jib: Lattice type, swingaway, stores along boom extension and
can only be used with extension deployed,
Length:
6,10m
Offset Angles:
15 & 30
Maximum Lifting Height: 47,0m
Auger Ready Package:
Includes hoses, fasteners and stowage bracket assembly mounted to
the base section of the boom with a flow capability of 130 liter/min
Complete Auger Package:
Adds a two speed auger motor/gear box and one 1,52 m kelly bar to
the Auger Ready Package.
Tool Circuit: Provides 23 liter/min and 45 liter/min at 176 bar through a 15,24 m
twin hose reel with quick disconnect fittings to operate open center
tools.
Free Fall Hoists:
All winches are available in controlled free fall configurations.
Crane Access Walkway:
Cab walkway and folding walkways along each side of the
superstructure.
1
Load moment indicating and anti-two block systems are operator aids and must never be used in lieu of job site lift planning calculations by the operator which must
take into account ground conditions, weather and all other environmental factors prevailing at the time of the lift. Prices and specifications are subject to change at any
time without prior notice and are for factory installation at time of original manufacture. F.O.B Plant; Richlands, VA 24641. Illustrations and photographs may show
optional equipment. Supercedes all previous issues. Please see www.mantiscranes.com for most current information.
GTC-400EX
Specifications
MAIN WINCH
Planetary geared two-speed winch includes a bent axis, variable displacement hydraulic motor and a multi-disc internal brake.
Wire Rope: 183 m 16 mm 6 x 37 EIPS, IWRC, RRL. Line pulls are not based on wire rope strength. Drum rotation indicator is standard.
Rope
Layer
Pitch Diameter
Layer
Total
77,8 kN
54,6 m/min
288,9 mm
23,2 m
23,2 m
69,8 kN
58,8 m/min
316,3 mm
25,3 m
48,5 m
63,6 kN
61,6 m/min
343,6 mm
27,7 m
76,3 m
58,3 kN
64,0 m/min
370,9 mm
29,9 m
106,1 m
53,8 kN
68,6 m/min
398,3 mm
32,0 m
138,1 m
AUXILIARY WINCH
Planetary geared single-speed winch includes a bent axis, variable displacement hydraulic motor and a multi-disc internal brake.
Wire Rope: 107 m 16 mm 6 x 37 EIPS, IWRC, RRL. Line pulls are not based on wire rope strength. Drum rotation indicator is standard.
Rope
Layer
Pitch Diameter
Layer
Total
53,4 kN
55,5 m/min
263,5 mm
19,8 m
19,8 m
47,6 kN
60,4 m/min
290,9 mm
20,1 m
38,4 m
43,6 kN
63,4 m/min
318,2 mm
22,6 m
60,7 m
40,0 kN
66,1 m/min
345,5 mm
24,7 m
85,6 m
36,9 kN
71,0 m/min
372,9 mm
27,1 m
112,8 m
ENGINE
Cummins QSB6.7 (U.S. EPA Tier 3, CARB Tier 3, Euromot Stage IIIA)
Noise Emissions: Top 96.3 dBa (excludes noise from intake, exhaust, cooling system and driven components)
Bore 107 mm
Stroke 124 mm
Machine Weights
STANDARD CRANE WITH 4 SECTION 32 m BOOM, 1 PIECE COUNTERWEIGHT & 900 mm TRACK SHOES
40,780 kg
23,280 kg
Counterweight
6,800 kg
10,700 kg
95 kg
183 kg
544 kg
311 kg
OPTIONAL EQUIPMENT
9.1 m Lattice Extension
771 kg
318 kg
200 kg
690 kg
54 kg
64 kg
GTC-400EX
LOAD CHARTS
1.5 m
1.5 m
1.5 m
10
caution
these chart values are only a guide and must not be used to operate the crane. use only the in cab load charts and operators manual furnished with the crane.
GTC-400EX
LOAD CHARTS
lifting capacities
LOADS IN METRIC TON
10,4-32m
1.4 km/h
L
RADIUS (m)
10,4-32m
10,4
12,8
15,2
17,5
3,0
40,8
36,3
31,8
27,6
3,5
39,2
35,6
29,7
25,6
4,0
35,3
33,0
27,8
23,8
16,1-28m
21,2
24,8
28,4
32,0
RADIUS (m)
3,0
5,2t
3,5
21,3
4,0
4,5
30,6
29,5 >32m
26,1
22,1
20,5
17,5
4,5
5,0
27,2
26,6
24,3
20,8
19,3
16,9
5,0
6,0
21,0
20,8
20,5
18,3
16,8
14,7
13,4
12,4
6,0
7,0
17,3
17,2
17,0
16,0
15,0
13,0
12,2
11,2
7,0
8,0
14,2
14,0
13,8
13,6
13,1
11,6
10,9
9,9
8,0
9,0
11,7
11,5
11,3
11,0
11,0
10,5
9,8
8,8
9,0
9,5
9,3
8,9
9,2
9,2
8,8
7,9
10,0
6,2
5,9
6,6
6,9
7,0
6,5
12,0
10,0
12,0
19,5-32m
14,0
4,3
4,9
5,2
5,4
5,4
14,0
16,0
3,4
3,9
4,1
4,4
4,5
16,0
3,0
3,2
3,4
3,5
18,0
20,0
2,5
2,7
2,8
20,0
22,0
2,0
2,1
2,2
22,0
24,0
1,6
1,7
24,0
26,0
1,0
1,2
26,0
28,0
0,8
28,0
30,0
0,6
30,0
18,0
NOTE: Capacities appearing above the bold line are based on structural strength; tipping should not be relied upon as a capacity
limitation. Capacities appearing below the bold line are based on stability and do not exceed 75% of tipping.
caution
these chart values are only a guide and must not be used to operate the crane. use only the in cab load charts and operators manual furnished with the crane.
11
GTC-400EX
LOAD CHARTS
lifting capacities
LOADS IN METRIC TON
6,8t
10,4-32m
1.4 km/h
L
6,8t
1.4 km/h
L
RADIUS (m)
16,1-28m
10,4-32m
10,4
12,8
15,2
17,5
3,0
40,8
36,3
31,8
27,6
3,5
35,6
33,6
29,7
25,6
4,0
30,0
29,2
26,6
23,7
>32m
16,1-28m
21,2
5,2t
24,8
28,4
32,0
RADIUS (m)
3,0
5,2t
3,5
21,3
4,0
4,5
24,5
24,119,5-32m
>32m
23,2
22,0
20,5
17,5
4,5
5,0
20,9
20,5
19,8
18,8
18,0
16,2
5,0
6,0
14,4
13,6
12,9
11,9
12,2
12,4
13,4
12,4
6,0
7,0
11,0
10,5
10,1
9,6
10,0
10,3
11,1
10,8
7,0
8,0
8,5
8,3
8,1
8,0
8,3
8,6
8,8
9,0
8,0
9,0
6,7
6,6
6,6
6,5
6,8
7,1
7,3
7,5
9,0
5,6
5,4
5,3
5,5
5,7
5,9
6,2
10,0
36,0
3,4
3,6
3,9
4,2
4,5
12,0
10,0
12,0
19,5-32m
14,0
2,4
2,7
2,9
3,1
3,2
14,0
16,0
1,8
1,8
2,0
2,1
2,2
16,0
1,0
1,1
1,3
1,4
18,0
20,0
NR
NR
NR
20,0
22,0
NR
NR
NR
22,0
24,0
NR
NR
24,0
26,0
NR
NR
26,0
28,0
NR
28,0
30,0
NR
30,0
18,0
NOTE: Capacities appearing above the bold line are based on structural strength; tipping should not be relied upon as a capacity
limitation. Capacities appearing below the bold line are based on stability and do not exceed 75% of tipping.
12
caution
these chart values are only a guide and must not be used to operate the crane. use only the in cab load charts and operators manual furnished with the crane.
GTC-400EX
LOAD CHARTS
lifting capacities
LOADS IN METRIC TON
6,8t
10,4-32m
1.4 km/h
L
10,4-32m
1.4 km/h
L
RADIUS (m)
10,4-32m
16,1-28m
10,4
12,8
15,2
17,5
3,0
34,0
36,2
31,8
27,6
3,5
27,1
28,2
26,8
25,6
4,0
22,8
23,1
22,7
22,3
>32m
16,1-28m
21,2
5,2t
24,8
28,4
32,0
RADIUS (m)
3,0
5,2t
3,5
20,5
4,0
4,5
19,9
19,5-32m
19,8
>32m
19,2
18,5
18,6
18,5
4,5
5,0
17,6
17,3
16,7
16,0
16,4
17,0
5,0
6,0
13,1
12,6
12,0
11,6
12,1
12,7
12,7
13,2
6,0
7,0
10,2
9,9
9,6
9,4
9,7
10,1
10,6
11,0
7,0
8,0
7,9
7,8
7,7
7,6
7,8
8,0
8,3
8,7
8,0
9,0
6,2
6,1
6,1
6,0
6,1
6,3
6,5
6,7
9,0
4,9
4,8
4,7
5,0
5,3
5,5
5,8
10,0
3,0
2,9
3,3
3,6
4,0
4,4
12,0
10,0
12,0
19,5-32m
14,0
2,2
2,5
2,7
3,0
3,3
14,0
16,0
1,6
1,8
2,0
2,2
2,3
16,0
1,1
1,3
1,4
1,6
18,0
20,0
0,8
0,9
1,0
20,0
22,0
0,5
0,5
0,7
22,0
18,0
NOTE: Capacities appearing above the bold line are based on structural strength; tipping should not be relied upon as a capacity
limitation. Capacities appearing below the bold line are based on stability and do not exceed 75% of tipping.
caution
these chart values are only a guide and must not be used to operate the crane. use only the in cab load charts and operators manual furnished with the crane.
13
GTC-400EX
LOAD CHARTS
lifting capacities
6,8t
1.4 km/h
10,4-32m
10,4-32m
10,4-32m
1.4 km/h
L 10,4-32m
6,8t
1.4 km/h
L
10,4-32m
10,4-32m
10,4-32m
16,1-28m
6,8t
6,8t
1.4 km/h
10,4-32m
10,4-32m9,1m EXTENSION
16,1-28m>32m
19,5-32m
>32m
16,1-28m
Boom
Angle
5,2t
16,1-28m
1.4 km/h
L
5,2t
6,1m JIB
6,8t
10,4-32m
Boom
Angle
16,1-28m
RADIUS10,4-32m
(m)
10,4 12,8
3,0
3,5
5,2t
17,5
21,2
24,8
28,4
32,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
4,5
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
6,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
7,0
>32m
16,1-28m
3,0
5,2t
3,5
>32m
19,5-32m
15
30
78
>32m
8,2
6,4
3,0
1,8
1,0
78
75
6,2
5,6
2,9
1,8
1,0
75
72
19,5-32m
5,2
4,5
2,5
1,6
0,9
72
5,0
4,6
4,1
2,3
1,5
0,9
70
6,0
68
4,0
3,6
2,1
1,4
0,8
68
65
3,6
3,4
1,9
1,3
0,8
65
7,0
62
3,3
2,7
1,8
1,2
0,8
62
8,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
8,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
9,0
5,0
5,0
5,0
5,0
5,0
5,0
5,0
10,0
5,0
5,0
5,0
5,0
5,0
5,0
12,0
70
19,5-32m
4,0
4,5
19,5-32m
>32m
5,0
5,0
5,0
19,5-32m
5,0
4,0
60
3,0
2,0
1,6
1,1
0,8
60
9,0
58
2,8
1,8
1,5
0,9
0,6
58
10,0
55
2,6
1,4
1,2
0,6
0,5
55
52
2,4
1,1
0,9
0,3
0,2
52
50
2,3
0,9
0,7
0,1
0,1
50
14,0
4,3
4,8
4,9
4,9
5,0
14,0
48
2,2
0,7
48
16,0
3,4
3,9
4,1
4,4
4,5
16,0
45
2,1
0,5
45
3,0
493 kg
180 kg
160 kg
910 kg
340 kg
1590 kg
90 kg
105 kg
255 kg
545 kg
12,0
3,2
3,4
3,5
18,0
20,0
18,0
2,3
2,5
2,6
20,0
22,0
2,0
2,1
2,2
22,0
24,0
1,6
1,7
24,0
26,0
1,0
1,2
26,0
28,0
0,8
28,0
30,0
0,6
30,0
NOTE: Capacities appearing above the bold line are based on structural strength; tipping
should not be relied upon as a capacity limitation. Capacities appearing below the bold line
are based on stability and do not exceed 75% of tipping.
14
RADIUS
(m)
caution
these chart values are only a guide and must not be used to operate the crane. use only the in cab load charts and operators manual furnished with the crane.
GTC-400EX
LOAD CHARTS
GTC-400EX
WIRE ROPE LINE PULL CAPACITIES
PARTS
OF LINE
MAIN
WINCH
(kN)
52
52
262
105
105
314
157
N/A
367
210
N/A
419
PLEASE READ, UNDERSTAND, AND FOLLOW THE MANUALS FURNISHED WITH THE CRANE (OPERATORS AND SAFETY)
AS WELL AS THE CAPACITY LIMITATIONS AND GENERAL CONDITIONS LISTED BELOW PRIOR TO OPERATION OF THE CRANE.
FAILURE TO DO SO MAY RESULT IN AN ACCIDENT.
7. D eductions from rated capacities must be made for the weight of the hook block,
headache ball, slings, spreader bar, and any other suspended equipment. See Lifting Capacity Deduction Chart for load handling devices supplied by Tadano Mantis
Corporation
8. A properly calibrated and maintained Load Moment Indicator (LMI) system will
indicate boom mounted and other suspended equipment.
9. When making lifts where capacities may be within a zone limited by structural
strength, the operator shall determine that the weight of the load is known within
plus or minus (+/-) ten percent (10%) before making lift.
10. It is permissible to attempt to telescope boom with a load within the limits of
rated capacities. However, boom telescope system hydraulic pressure, and/or
boom lubrication may affect operation.
11. S ide pull on boom is extremely dangerous and must be avoided.
12. DO NOT exceed manufacturers maximum specified reeving.
13. DO
NOT lift load or extend boom without proper configuration of crane per load
chart selected.
14. DO NOT attempt to lift any load when wind speed exceeds 32,2 km/h.
6,8
10,4-32m
Load moment indicating and anti-two block systems are operator aids and must never be used in lieu of job site lift planning calculations by the operator which
must take into account ground conditions, weather and all other environmental factors prevailing at the time of the lift.
Prices and specifications are subject to change at any time without prior notice and are for factory installation at the time of original manufacture. F.O.B Plant;
10,4-32m 10,4-32m
Richlands, VA 24641. Illustrations and photographs may show optional equipment. Supercedes all previous issues.
Please see www.mantiscranes.com for most current information.
0,4-32m
6,8t
10,4-32m
Slewing System
0,4-32m
6,1-28m
>32m
9,5-32m
10,4-32m
6,8t
1.4 km/h
Maximum Out
of Level Limit
16,1-28m
16,1-28m
10,4-32m
1.4 km/h
Tracks
L Fully
Extended
10,4-32m
6,8t
10,4-32m
Tracks Fully
Retracted
5,2t 16,1-28m
>32m
5,2t
>32m
19,5-32m
19,5-32m
10,4-32m
1.4 km/h
L
L
10,4-32m
10,4-32m
5,2t
16,1-28m
16,1-28m
>32m
6,8t
caution
1.4 km/h
L
Main Boom
6,8t
6,8t
10,4-32m
1.4
km/h 16,1-28m
>32m
>32m
CounterwEIght
5,2t
5,2t
5,2t
5,2
19,5-32m
these chart values are only a guide and must not be used to operate the crane. use only the in cab load charts and operators manual furnished with the crane.
>32m
19,5-32m
15
1705 Columbia Avenue Franklin, TN 37064 USA Toll-Free: 1-800-272-3325 Fax: 615-790-6803 mantiscranes.com
GTC-300EX
GTC-400EX
GTC-700EX
GTC-1000EX
411-03/11