Metal Framing and Finishing Catalog

Document1 3/23/04 5:18 PM Page 1
$12.95
■ Interior Framing
■ Exterior Framing
■ Floor Framing
■ Truss Framing
■ Fire-Rated Assemblies
■ Metal Beads & Trims
■ Vinyl Beads & Trims
■ Paper-Faced Beads & Trims
■ Veneer, Stucco & Plaster

Beads & Trims
■ Metal Lath
The place to stop…before the building starts!

Dietrich04_IFC-001-NEW 3/23/04 4:57 PM Page 2
INTRODUCTION
Dietrich Metal Framing, headquartered in Pittsburgh, PA, is the
largest producer of metal framing and finishing products in the
world. As the industry leader, Dietrich offers the best of prod-
ucts, brands, systems, services and companies to provide the
construction industry with comprehensive, innovative, low-
cost, single-source procurement, supply and building solutions.
Dietrich believes leadership is about action — not simply posi-
tion. That’s why we continually strive to expand our existing
markets, develop framing technologies, create value-added sys-
tems and introduce countless new products to meet the ever-
changing demands of the building and construction industry.
The Value You Receive

We provide our customers with a wide range
of benefits such as supplier consolidation,
product rationalization and integrated supply
programs. Here’s what you can expect:
■ Industry’s Broadest Product Line
■ Consolidated Procurement
■ Improved Inventory Turns
The Products We Make ■ Reliable & Consistent Service
■ Superior Quality
Dietrich Metal Framing is your total source for light-gauge framing and finishing products,
systems, services and solutions. Dietrich is your one-stop source for the industry’s widest ■ Local Manufacturing with Global
selection of wall, floor and truss framing, metal, vinyl, veneer and stucco finishing beads Distribution
and trims, and a full array of plaster and lath products. We deliver the highest-quality fram- ■ Innovative Products, Systems
ing and finishing products anywhere in the world. Dietrich delivers everything you need to & Services
keep costs down and productivity up. ■ The Most-Specified Light-Gauge
Manufacturer
■ Axial & Curtain-Wall Framing
■ Best of Brands, Systems & Services
■ Interior, Nonstructural Framing
■ Shaftwall & Area Separation Wall ■ Exceptional Customer Care
■ Fire-Rated Assemblies ■ Expert Sales & Field Service
Representatives
■ Floor & Roof Truss Systems
■ Professional Technical & Design
■ Deflection Systems
Assistance
■ Metal, Vinyl, Paper-Faced & Veneer Beads and Trims
■ Expert Product Training
■ Control & Expansion Joints
■ Metal Lath & Barrier Mesh
■ Stucco & Plaster Beads and Trims
■ Prefabricated & Turnkey Building Solutions
■ Clips, Connectors & Fasteners
dietrich metalframing •com
Dietrich04_IFC-001-NEW 3/22/04 8:57 AM Page 1
What’s Inside
Section Page(s)
Overview . . . . . . . . . . . . . . . . . . . . 1–20
Interior Framing . . . . . . . . . . . . . 21–54
Exterior Framing. . . . . . . . . . . . . 55–94
We Go the Extra Mile

We work hard to make it easy for you to do business. From our state-of-the-art manufacturing Floor Framing . . . . . . . . . . . . . . 95–114
to sophisticated quality control processes, to faxed order confirmations, we do more so you don’t
have to.
Truss Framing. . . . . . . . . . . . . 115–120

The Projects We Supply
COMMERCIAL
■ High-Rise Fire-Rated Assemblies . . . . . . 121–128
■ Mid-Rise
■ Low-Rise
■ Retail Metal Beads & Trims . . . . . . . 129–152
■ Office Buildings
■ Hotels/Motels
Vinyl Beads & Trims . . . . . . . . 153–166

INSTITUTIONAL
■ Universities
■ Schools
Paper-Faced Beads & Trims. . 167–180
■ Medical Centers
■ Religious
■ Hospitals
Veneer, Stucco & Plaster
Beads & Trims. . . . . . . . . . . 181–204
RESIDENTIAL
■ Single Family
■ Multi-Family Metal Lath. . . . . . . . . . . . . . . . 205–216
■ Assisted Living
■ Military Housing
■ Manufactured & Modular Housing Index . . . . . . . . . . . . . . . . . . . . 217–221
■ Apartments & Condominiums Material Certification . . . . . . . 222–223
LEED™ Certification. . . . . . . . . . . . . 224
Your Best Value™ Cover photo courtesy of GQ Contracting

Build better, faster and more profitably with these
high-performance products, systems and services.
Look for the BEST VALUE™ icons located throughout
this catalog.
1
Dietrich04_002-003-NEW 3/22/04 8:45 AM Page 2
the PEOPLE
we SERVE
Whether you’re an architect, engineer, contractor, builder,
supplier or a do-it-yourselfer, Dietrich is the one-stop source
for framing and finishing solutions. From design to installation
assistance, we provide the products, pricing, innovation,
technical support and superior service to make each and every
project a total success.
Renton
Stockton
Denver
Colton Phoenix
Fast, Flexible and Responsive Service Goodyear
Dietrich Customer Care Representatives are readily available to respond to your urgent
product needs. Call, fax or e-mail your needs, questions or problems and we will deliver.
Count on Dietrich to stock the products you need at competitive prices. We strive to fill
stock orders within 24–48 hours.
Need custom packaging, small skid quantities, special skid markings or cut-to-length
product? We custom make, pack, label and ship to your exact specifications. Price is
important — service even more. Our services include:
■ Full or LTL Deliveries

■ Route Truck Delivery Service Kapolei, HI
■ One-Stop Shopping
■ Cut-to-Length
■ Specialized Packaging and Loading
■ Skid Labeling
■ Floor Breakdowns
■ Custom Part Fabrication
2
Manufacturing and
Sales Locations
Arizona Phoenix ............... 602-447-0204
Goodyear............. 623-932-1407
California Colton ................ 909-824-9717
Stockton.............. 209-547-9066
Colorado Denver ................ 303-289-4092
Florida Miami.................. 305-652-5423
Wildwood ............ 352-748-7200
Georgia McDonough........ 678-304-5500
Hawaii Kapolei ................ 808-682-5747
Illinois Joliet ................... 815-207-0110
Indiana Hammond ........... 219-931-3741
Your Local Supplier Kansas Lenexa ................ 913-599-2026

Maryland Baltimore............. 410-477-8700
With 38 manufacturing and service locations strategically positioned throughout the United Massachusetts Lunenburg........... 978-342-9742
States, we’re your local company ready to deliver what you need, when you need it. Many
New Jersey Boonton............... 973-335-3240
customers require technical engineering support, breadth of products and procurement
sourcing programs unavailable from smaller regional or local competitors. Ohio Warren ................ 330-372-4014
South Carolina Rock Hill.............. 803-324-4144
Texas Baytown .............. 281-383-1617
Hutchins.............. 972-225-1100
Washington Renton ................ 425-251-1497
International Miami.................. 305-652-5423
Hammond
World Headquarters
Warren 500 Grant Street, Suite 2226
Pittsburgh, PA 15219
Lunenburg
412-281-2805 phone
412-281-2965 fax
Boonton
Other Dietrich Divisions

Joliet
Aegis Metal Framing ...................... 866-902-3447
Clinch-On Products, Inc...................352-799-1798
Baltimore
Lenexa Vinyl Corp. ...................................... 800-648-4695
Dietrich Building Systems.............. 216-472-1511
Dietrich Cimple Steel Solutions...... 512-249-6681
Dietrich Design Group North .......... 800-873-2443
Rock Hill
or ............................... 219-853-9474
Hutchins
McDonough Dietrich Design Group South......... 800-969-4110
or .............................. 678-304-5525
Baytown Dietrich Residential Steel Systems... 614-840-4529
Wildwood
Miami
Dietrich Metal Framing, a Worthington Industries Company, is the leading manufacturer of light-gauge framing and finishing products, systems and services for commercial
and residential construction. Dietrich offers the largest selection of light-gauge framing and finishing products including drywall and structural framing, floor joists, roof
trusses, metal lath, fire-rated assemblies, numerous deflection systems and an extensive line of metal, vinyl, veneer, paper-faced, plaster
and stucco beads and trims.
Dietrich Metal Framing companies and divisions include Dietrich Design Group, Aegis Metal Framing, Clinch-On Products, Inc., Vinyl
Corp., Dietrich Building Systems, and Dietrich Residential Steel Systems. Together, we provide superior, cost-effective, single-source
building and framing solutions.
Dietrich Metal Framing and Dietrich are trade names, trademarks and service marks of Dietrich Industries, Inc., which is headquartered
in Pittsburgh, PA. Dietrich and its divisions operate 38 manufacturing and service locations throughout North America.
3
how to USE
this MANUAL
This catalog is designed to help you select the right products or Yield Strength, Fy/(PSI or KSI)
systems for your construction applications. It is the most com- Yield strength is the property by which the
prehensive manual in the industry. This catalog is divided into strength of steel is typically defined. Dietrich
products are manufactured with steel having a
ten major sections that are color coded for easy reference. A com- yield point of 33 KSI for all gauges. 50 KSI is
available in 16, 14 and 12 gauge and must be
prehensive index is also located at the back of the catalog for specified when ordering. KSI is short for kips per
your convenience. square inch. One kip is equal to 1,000 pounds.
Each product page includes an extensive product overview, ben- Protective Coating
efits, features and product and application renderings. Reference Non-structural products have a protective cor-
rosion resistant galvanized coating conforming
charts contain size availability and packaging information. to ASTM Specification A 1003 – G-40 mini-
Each chart also includes metric sizing for your convenience. mum coating weight or have a protective coat-
ing with an equivalent corrosion resistance. This
Structural properties and load tables are not included in this coating weight is in accordance with the indus-
try standard requirements of ASTM C 645.
catalog, but are available in the Dietrich Metal Framing™
Structural products have a protective corro-
Technical Design Guide. The design guide includes physical and sion resistant galvanized coating conforming to
structural properties, axial-load, allowable height and joist span ASTM Specification A 1003 – G-60 minimum
coating weight or have a protective coating
tables. The Technical Design Guide is available on our website at with an equivalent corrosion resistance. This
coating weight is in accordance with the indus-
www.dietrichmetalframing.com. The publication is also avail- try standard requirements of ASTM C 955.
able from your Dietrich sales representative or by contacting A G-90 coating weight is available on a special
your nearest sales office. order basis and must be specified at the time of
ordering. A G-90 coating is not considered an
industry standard and may result in additional
Product Codes/Designators cost and extended delivery times.
Each Dietrich product or system component is identified by a 3-or 4-digit alphanumeric
code for ease of ordering. Corresponding SSMA member designator, where applicable, is
Product Labeling
also provided for easy reference. Skids are clearly identified with master skid
labels that display product, gauge, size, length,
The Steel Stud Manufacturers Association (SSMA) has established industry standard
piece count, yield strength and any special skid
nomenclature for steel framing members and components. The SSMA reference is identi-
markings specified at the time of order.
fied by an easy-to-understand alphanumeric code. The alpha designation is S, T, U, or F,
Individual ink jet labeling (including company
where S = stud or joist, T = track, U = cold rolled channel, and F = furring channel.
name, product, size, length, gauge, coating and
Product identification is simplified with the SSMA standard member yield strength) or embossing is also provided on
designation. While the letters define the section type, the many of our structural framing members. UPC
numbers identify web depth, flange width and minimum bar coding is also available for certain products.
steel thickness as shown in the following example.
WARNING: Handling of this product
Dietrich products meet or exceed all SSMA requirements. without the proper use of hand and eye
Web Care should be taken, however, when substituting mate- protection may result in injury.
rials in place of Dietrich Metal Framing. There is a mis-
conception within the construction industry regarding the
substitution of one manufacturer’s products or materials Steel Thickness (Gauge)
Flange for those of another manufacturer. The assumption is that The steel thickness of a product or component
all studs of a given size and steel thickness are inter- is referenced in terms of gauge or mils. The
400 S137-33 changeable. It may be possible that the substitution can
Web Size: 400 = 4" thickness or gauge is a key contributor to the
Member Type: S = Stud or Joist
safely be made, but the decision should not be made until strength of the product.
Flange Width: 137 = 1-3/8" (1.37") the structural properties of the products or materials
Min. Steel Thickness in mils: 33 = .0329" involved are compared by a qualified engineer.
4
Comprehensive
Index
A comprehensive index can be found at the
back of the catalog for a quick reference guide
to our complete product and system offering,
so you can easily locate the specific Dietrich
product or system that meets your needs. This
Steel Thickness with Color Code index includes common names, synonyms and
Thickness ASTM even industry slang to help you quickly find
Design Thickness Minimum Thickness Color exactly what you’re seeking.
Gauge Mils
Inches (mm) Inches (mm) Code*
25 18 0.0188 0.48 0.0179 0.45 None
22 27 0.0283 0.72 0.0269 0.68 Black
20 DW 30 0.0312 0.79 0.0296 0.75 Pink Patents
20 STR 33 0.0346 0.88 0.0329 0.84 White
18 43 0.0451 1.14 0.0428 1.09 Yellow U.S. Patent Nos. 5,784,850; 6,021,618; 6,694,695;
5,689,922; 6,301,854; 6,691,478;
16 54 0.0566 1.44 0.0538 1.37 Green
6,418,694; 6,430,890, and 6,708,460
14 68 0.0713 1.81 0.0677 1.72 Orange are owned by Dietrich Industries, Inc.
12 97 0.1017 2.58 0.0966 2.45 Red U.S. Patent No. 6,688,069 is owned by Unimast
*Color coded product may or may not be available. Varies by market. Incorporated
U.S. Patent No. 5,127,760 is owned by Brady
Construction Innovations, Inc.
Note: All products comply with ASTM standards and Federal specifications as shown in Certification of U.S. Patent Nos. 5,613,335 and 5,836,122 are owned by
Materials in the back of this catalog. Minimum thickness is 95% of the design thickness per AISI code. Corus CIC Inc.
U.S. Patent No. 5,836,133 is owned by B&D Industries,
The trend today is to refer to steel thickness in terms of “mil” rather than “gauge”. This catalog Inc.
includes both for ease of use. One mil is equivalent to 1/1000, (.001) of an inch. The mil thickness
measures the uncoated base metal material. A 20-gauge stud measuring the minimum uncoated base
Trademarks
metal at 0.030 inches is “30 mils thick”. Dietrich Metal Framing and Dietrich are trade names, trade-
marks and service marks of Dietrich Industries, Inc.
for Dietrich structural framing can be found in
Standards & Specifications the Dietrich Technical Design Guide available
TRADEREADY®, SPAZZER®, FAST CLIP™, EASYCLIP™, FAST TOP™,
FAST STRUT™, UNI-CLIP™, RC DELUXE™, DOUBLETRACK™,
THE BUCKET THAT MAY SAVE YOUR BUTT!™, ONE CALL CAN DO
All members comply with ASTM standards and from your nearest Dietrich sales office. It can IT ALLSM, THE PLACE TO STOP BEFORE THE BUILDING STARTSSM,
Federal specifications as shown in the Certification of also be found on our web site at www.dietrich- SPAZZER and Design™, BEST VALUE and Design™, YOUR BEST
Material at the back of this catalog.All structural prop- metalframing.com. VALUE™, DIETRICH CLIP EXPRESSSM, DIETRICH CLIP EXPRESS
and DesignSM, BAR GUARD™, B-SERIES™, BP-SERIES™,
erties are developed in accordance with the American C-SERIES™, CA-SERIES™, CS-SERIES™, CHN-SERIES™,
Product, application renderings and photographs
Iron and Steel Institute’s “Specification for the Design DT-SERIES™, DTN-SERIES™, E-SERIES™, FC-SERIES™,
are provided as a tool to show the general intent M400-SERIES™, OT-SERIES™, QC-SERIES™, RC-SERIES™,
of Cold-Formed Steel Structural Members.”
of the framing or finishing application only. These S-SERIES™, TD-SERIES™, TR-SERIES™, TS-SERIES™, U-SERIES™,
renderings or photographs may or may not be X-SERIES™, ZF-SERIES™, EVERYTHING YOU NEED, WHEN YOU
Metric Specifications applicable to a specific project. They do not
NEED IT, HOW YOU NEED IT AND WHERE...YOU NEED ITSM,
DOUBLE X™, CENTIPEDE™, E-DIETRICHSM, CORNERITE™,
At your request, Dietrich Metal Framing will provide replace or supercede the architect or engineer of QUICKCLIP™, CORNER MASTER™, CWI™, CWN™, CSJ™, CSW™,
record, ASTM guidelines, national or local build- CSE™, CSS™, “J” ROUND™, JUNIOR™, 103 DELUXE®
“soft” metric conversions on its products and sys- and QUICKSILVER™ are owned by Dietrich Industries, Inc.
tems to help specifiers match metric design sizes. In ing codes or approved industry standards.
UNIMAST®, RIPBEAD™ and MINI-BEAD™ are trademarks of
addition, some products are available with hard met- Dietrich Metal Framing reserves the right to
Unimast Incorporated.
ric dimensions from selected manufacturing facilities. change or modify the information contained in ULTRA-SPAN® is a registered trademark of Aegis Metal
Framing LLC
this catalog without prior notice or obligation.
General Notes The information in this catalog supercedes all
DANBACK™ is a trademark of Daniel W. Tollenaar
GOLDLINE® is a registered trademark of Corus CIC Inc.
The data contained in this brochure is intended previously published data. Products and systems GRABBER® and GRABBER SUPERDRIVE® are registered trade-
to be used as a general guideline only and does may be improved and/or changed after this cat- marks of John Wagner Associates, Inc.
not replace the judgments and designs of a alog is printed. METALEX® is a registered trademark of Metalex Corporation
qualified architect and/or engineer. This catalog KEENE BUILDING PRODUCTS™ is a trademark of Metalex
All products described here may not be available Corporation
does not provide load data necessary for build- in all geographic markets. Consult your local LOX DRIVE® is a registered trademark of JJCT Enterprises, Inc.
ing design. Load capacities, limiting heights, sales office for information. SIMPSON™ and SIMPSON STRONG-TIE™ are trademarks of
physical and structural properties and span data Simpson Strong-Tie Company, Inc.
SLP-TRK® is a registered trademark of Sliptrack Systems, Inc.
Warranty UL™ and UL and Design® are trademarks of Underwriter's
Laboratories, Inc.
Dietrich Metal Framing warrants that all products are free from defect at time of shipment, and are TAPCON® is a registered trademark of Illinois Tool Works, Inc.
manufactured in accordance with company and/or industry standards as applicable. © 2004 Dietrich Metal Framing. All rights reserved.
Printed in U.S.A.
NOTICE: We shall not be liable for incidental and consequential damages, directly or indirectly sus-
tained, nor for any loss caused by application of these goods not in accordance with current print-
ed instructions or for other than the intended use. Our liability is expressly limited to replacement
of defective goods. Any claim shall be deemed waived unless made in writing to us within thirty
(30) days from date it was or reasonably should have been discovered.
5
the “DIETRICH”
difference
More products…more brands…and more value with fast,
accurate and reliable service. It’s what you expect from a
leader—it’s what you get from Dietrich.
Supplier Consolidation
Streamline the procurement process, reduce
administrative and supply costs and improve
operating efficiency.
Breadth of Products
The industry’s largest product offering of framing
and finishing products, systems and services.
Service
Fast, reliable and consistent service where
and when you want it.
Quality
“Zero” defects is our goal. You get the same
high-quality, consistent, precision-formed
products each and every time.
On-Time Delivery
We deliver it when you want it.
Brand Recognition
The most specified, requested and used
brands in the industry.
EVERYTHING you need, when you need it,

6
You Get…
What You Pay for
You can always find someone with a cheaper
price. But no one will offer a lower overall cost
and better value. We go far beyond supplying
products. No matter where you are in the sup-
ply chain, Dietrich will streamline the design,
procurement and building process while
improving reliability, quality, productivity and
your bottom line.
National Distribution
38 manufacturing and service locations with facilities in most major metropolitan cities servicing all 50 states. Dietrich is the acknowledged leader when
it comes to supporting the supply requirements of large national and multi-national customers.
Technical Support
The finest technical assistance in the world. We respond to over 30,000 calls per year.
Order Accuracy
We do everything we can to make sure each and every order is right the first time. We send immediate faxed order confirmations so you can also
double-check the order.
High Fill Rates

Our sophisticated manufacturing and loading processes ensure the highest fill rates.
New Product Development

We continually develop and introduce countless new products, systems and services to meet the expanding needs of the construction industry.
Training
Our field representatives are recognized as experts in the industry. They provide comprehensive product, installation and sales training.
Market Expansion
We commit substantial resources to grow the light-gauge market and create more opportunities for our customers in the supply chain.
how you need it and where…

YOU NEED IT.
SM
7
the BENEFITS
of STEEL
Superior and
Uniform Quality
■ Steel is roll formed into precise, uniform shapes with exacting
tolerances for consistent material quality. There is no need for
sorting (culling) or special handling to inspect for crown.
■ Steel studs are straight. They don’t warp, twist, bow, split or have knots, which means
straight walls, square corners and doors and windows that open and close properly.
BUILD with S
■ Steel is dimensionally stable and won’t shrink like wood, eliminating nail popping, What about Rust?
wall cracking or floor squeaking. ■ Steel framing members in wall cavities,
■ Steel does not rot, promote mold or mildew and is impermeable to termites, vermin attic spaces or crawl spaces that are not
and insects. exposed to water will last over 300
years, per a study conducted in England.
■ Forensic studies recently conducted on
Oahu residences built over 40 years ago
showed steel wall studs with no visible
signs of corrosion.
■ Zinc coating protects steel by providing
a physical barrier as well as cathodic
protection to the underlying steel. When
the base is exposed, such as at a cut
or scratch, the steel is cathodically
protected by the sacrificial corrosion of
the zinc coating adjacent to the steel.
High Strength/Light Weight/Versatile

■ Steel has one of the highest strength-to-weight ratios of any building material.
■ Because of its strength, steel can mean fewer framing members with wider
on-center spacing, reducing material and labor costs.
■ Steel framing can weigh substantially less when compared to traditional building
materials like masonry and concrete systems.
■ Light-gauge framing can reach spans far greater than traditional or engineered
lumber, providing larger open spaces, taller walls and flexible floor plans.
■ Steel framing lightens structures, reducing foundation requirements and often
reducing or eliminating piling.
■ Stick for stick, steel can weigh up to 50% less compared to lumber.
■ Steel can adapt to almost any application and works well independently
or in combination with other structural systems.

8
What about Cost?
■ More economical
than traditional
masonry, concrete
and other
construction
methods.
■ Significantly less
costly than wood 2x4s
for nonload-bearing wall framing.
■ Reduces or eliminates callback costs for
nail pops, floor squeaks and wall cracks
due to shrinkage. The NAHB estimates
the average callback costs the builder
over $350.00 per call.
h STEEL today... ■ Lower costs for construction and

homeowner’s insurance.
Fire Resistance Termites Mold

■ Steel framing is non-combustible and A few things you should know. ■ Steel does not promote the growth
will not add fuel to a fire. It improves of mold and reduces the threat
fire safety in compliance with local ■ Over $1 billion is spent each year for of staggering litigation.
codes and regulations. prevention, control and repair.
■ Mold requires an organic nutrient
■ Steel framing offers code approved ■ Steel framing provides a termite-proof source and moisture to grow and
increases in allowable floor area and/or solution for the structural integrity of flourish. Steel is inorganic and does not
allowable building heights compared your project. contain moisture like wood. Kiln dried
to conventional wood framing. ■ The most ferocious termite is the lumber still has between 11–14%
■ One-third of all fires start in the Formosan Subterranean “Super residual water content.
wall cavity. Termite.” ■ California has already passed mold-
■ Actual case studies show steel houses ■ An average colony consists of about related laws, and nine other states have
perform very well in house fires, with 3 million termites, but can be as large legislation pending.
little or no damage to the framing as 10 million. A single colony normally
structure. survives about 35 years.
■ A well-fed Formosan queen can live
for 25 years and lay 1,000 eggs a day.
9
the BENEFITS
of STEEL
...for benefits t
What about Lightning?
■ Steel buildings are lightning resistant because steel framing provides
multiple conductive paths directly to the ground.
■ The steel frame reduces the likelihood of explosions, secondary fires
or personal injury.
■ Steel skyscrapers have provided occupants with safe offices and
residences for years.
Earthquakes or Hurricanes?
■ Steel framing can be engineered to meet the highest seismic and wind loads
prescribed by building codes.
■ Steel has the highest strength-to-weight ratio of any framing material; a lighter
structure with stronger connections results in lower damage from seismic force.
■ Steel’s strength and resiliency help it to survive earthquakes.
■ Smaller probability of damage in high winds; stronger connections
(screwed vs. nailed) can withstand greater winds.
■ For generations we have relied on the strength and durability of steel in our
commercial buildings, hospitals and schools.

10
Easy to Use
■ Interior nonload-bearing studs are cut

easily with metal snips (aviator snips). They
do not require the use of a circular saw.
■ Simply twist metal studs into place and
screw attach. Make a mistake and simply
reverse the screw gun.
■ Up to 50% lighter than wood.
■ Pre-punched holes eliminate drilling for
electrical and plumbing lines.
■ Special order cut-to-length material
eliminates field cutting and waste.
s that will LAST A LIFETIME.
Environmental Live and North America’s Most

Benefits Breathe Easier Recycled Material
■ Steel offers builders an environmentally ■ The Healthy House Institute ■ Steel is 100% recyclable and
friendly alternative to wood. recommends steel framing for good considered a green building material.
■ There is little waste when using steel indoor air quality. ■ Steel framing materials contain
framing materials. ■ Chemically sensitive homeowners on average 67% recycled steel.
■ Builders can reduce their disposal costs and those susceptible to asthma are ■ Steel can be a significant contributor
and divert material from local landfills exposed to fewer toxins in a steel- to the LEED certification process.
(2% – steel vs. 20% – lumber). framed home.
■ It takes 25 old growth trees to build a
■ Building an average wood-frame home ■ The American Lung Association 2,500 square foot home, compared with
generates approximately 50 cubic feet encourages the use of steel framing 7 recycled automobiles for the same
of landfill waste, while a comparable with its Health House program. steel-framed home.
steel home generates about 1.5 cubic ■ Steel resists mold spores that can lead ■ 60 million tons of steel scrap are
feet of waste. to chronic illness. recycled each year: more than paper,
■ No pesticides or toxins are required aluminum, glass and plastic combined.
to protect the framing from termites
or vermin.
■ No off gassing from resins, adhesives
or chemicals normally used for wood
construction.
■ Better insulation values with EPS foam
reduces outside noise pollution.
11
the BEST
of BRANDS
Quality is simply not compromised. That’s why Dietrich only pro-
vides the best brands and the highest-quality products available.
We offer more than 3,000 high-quality framing and finishing
products available to meet your every need.
the BEST of
the BRANDS you KNOW!

the BRANDS you TRUST!
the BRANDS the PROS DEMAND!
12
The Best of
Companies
Combining the best of companies to offer a
complete array of products, systems and services,
this unique synergy of companies can provide
total and comprehensive support for every
phase of the construction process including
design, supply, fabrication and installation.
Discover how each of these Dietrich companies
can lower your cost and improve your productivity.
Dietrich Metal Framing related companies and
divisions include Aegis Metal Framing, Vinyl
Corp., Dietrich Building Systems, Dietrich Design
Group and Dietrich Residential Steel Systems.
COMPANIES
Together, they provide the expertise, systems and
f
techniques for superior, cost-effective, single-
source, fast track framing, finishing and building
solutions.
Aegis Metal Framing, through a nationwide Dietrich Residential Steel Systems (DRSS) Dietrich Design Group (DDG) is the largest light-
fabrication network, provides computer- provides conversion, training assistance and gauge framing engineering company in the coun-
designed, factory-built, light-gauge metal framing solutions to major production home try. DDG is licensed in all 50 states and can sup-
truss, wall and floor panels for commercial builders utilizing the latest products, tools, sys- ply technical assistance, design assistance and
structures. . . . . . . . . . . . . . . . 314-851-2200 tems and techniques for economical, long-term shop drawings for projects built anywhere in the
wood framing alternatives. . . . . . 614-840-4529 world. . . . . . . . . . . . . . . . . . . . . . 800-873-2443
Dietrich Metal Framing and Dietrich are trade

names, trademarks and service marks of Dietrich
Industries, Inc.
Dietrich Building Systems (DBS), utilizing the Vinyl Corp., another best-in-class company
Design-Build model, focuses on converting com- offering one of the industry’s largest vinyl finish-
mercial structures designed from wood or other ing product selections for drywall, stucco, EIFS,
traditional building products to cost-advanta- DEFS and ceiling applications. . . 800-648-4695
geous, total load-bearing, light-gauge framing
systems. . . . . . . . . . . . . . . . . . . 216-472-1511
13
the BEST
of SERVICES
the BEST of
SM
Dietrich Clip Express
If we get it today, you get it tomorrow. Dietrich Clip ExpressSM service offers various ship-
ping options from standard ground to overnight express for the widest selection of deflec-
tion, bridging, rigid, general purpose and specialty clips and fasteners. We understand that
in today’s fast track construction environment, keeping a project on schedule is critical.
Count on us to get it where, when and how you want it.
On-Time Delivery
On time, when you want it, where you want it. Dietrich’s primarily dedicated fleet
of contract carriers set the standard for on-time delivery performance.
Technical Support
DDG, our independent professional services company, provides the finest technical
support services available for light-gauge framing. Licensed in all 50 states, DDG pro-
vides a wide array of services including certified shop drawings, free preliminary
designs and a technical support hotline for immediate assistance.
Customer Care
Our people work harder so you don’t have to. You will find the most knowledgeable,
responsive “can do” attitudes in the industry. At Dietrich Metal Framing, customer service
is simply not a department…it’s a contagious attitude.
Field Support
Well-trained, knowledgeable and
experienced field personnel are
experts in the industry. They provide
product support, in-depth training,
new product demonstrations and
installation assistance.
Need It Fast?
Available for Look for the Dietrich Clip ExpressSM icon
Overnight throughout this catalog. These prod-
Delivery! ucts are readily available for same-day
shipment.
BUCKET that may save your BUTT!

SM
the
14
The Best of
Systems
It’s not simply about supplying high-quality
products. It’s about value-added systems and
assemblies that reduce building cost and
improve building quality. Building with Dietrich
high-performance systems means…superior
quality, faster installation, system flexibility
and increased productivity.
f SYSTEMS
TradeReady® Area Separation Wall CT Cavity Shaft Wall

Floor System A two-hour fire-rated system provides protec-
tion between adjacent living units in apartment
Nonload-bearing fire-rated wall assemblies
that provide critical, life safety, fire-resistant
A lightweight, cost-effective alternative to open buildings, condominiums, townhouses and protection for elevator shafts, stairwells, vertical
web truss, bar joist, engineered lumber, cast- multi-family construction. chases and mechanical enclosures.
in-place or hollow-core floor assemblies.
Ultra-Span* SLP-TRK**
The safest, most cost-effective, noncom- Sliptrack systems provide over 100 UL*** rated
bustible, fully engineered, prefabricated deflection and fire-rated assemblies for head-
UL*** classified light-gauge roof truss system. of-wall framing.
*Ultra-Span is a registered trademark of Aegis Metal Framing LLC.

**SLP-TRK is a registered trademark of Sliptrack Systems, Inc.
***UL™ and UL Classified are trademarks of Underwriter’s Laboratories, Inc.
15
one CALL
ALL
SM
can do it
Shipping
Need it fast — we ship 95% of in-stock orders
within 48 hours.
Ordering
Phone, fax, e-mail or EDI — you decide.
Service
Far more than order takers, Dietrich Customer
Care Representatives are experts in the industry.
Let us put our knowledge to work for you.
E-Business
We make it easy for you to do business. Fast,
flexible options to make you more efficient,
reduce procurement and administrative costs
and improve productivity.
Support ■ EDI — Electronic Data Interchange
■ Flexible invoicing by mail, fax, e-mail
Have questions? We have the answers. Call, fax or EDI
or e-mail us and we will answer your questions
■ Easy payment options by check, wire
promptly. transfer or credit card
Dietrich is committed to ongoing development
of technologies and e-business solutions to
lower procurement costs.
Products
Over 3,000 different products/product combina-
tions. The largest selection of products in the
industry. One call that truly does it all.
Custom
When “off-the-shelf” just won’t do, call Dietrich.
We can custom fabricate and provide made-to-
order products to meet your needs.

16
Customer
Care
It’s all about taking care of you. We get it. We
understand that you are the lifeblood of our
business. Our world revolves around you.
That’s why we do everything in our power
to make sure you experience world-class
customer care each and every time.
CUSTOMER care
Convenient Ordering
With just one call, you can reach the expert sales and support team for prices, availability,
ordering, technical support or additional information on our over 3,000 products.
At Dietrich, our Customer Care Representatives are ready to help you with all your needs. Our
skilled, knowledgeable staff utilizes a sophisticated order entry system to ensure customer orders
and inquiries are handled quickly and accurately.
We Get It Right the First Time

The order you placed on Monday with another company arrives on Thursday and you find out it’s
wrong. What a mess. Now you have to deal with that very upset contractor waiting for the materi-
al, not to mention all the paperwork, phone calls and hassles that go along with a wrong order.
Maybe next time you’ll turn to Dietrich. We get it right the first time.
Starting with the order process, our Customer Care Representatives double and triple check each
and every order. Next, we send you a faxed confirmation to verify the correct size, gauge, length,
piece count and price.
Using state-of-the-art manufacturing technologies and automated production control, your order is
manufactured to exact specifications. Every step of the way numerous quality control checks are
made to ensure the highest product quality and integrity. When your order is completed and ready
for transit, each unit is automatically reconciled against the pick list using detailed bar code
tracking. The truck cannot be released until the order completely reconciles. It’s no wonder Dietrich
has one of the best fill-rates in the business.
“Can Do” Attitude

If there is a way, we go the extra mile to find it and do it. We know the success of your
business depends on our ability to get it when you want it, how you want it and where you want it.
No one works harder to exceed your expectations.
Your Business Is Built on Service

That’s why our Customer Care Representatives are dedicated to immediate and quick response.
If we can’t answer your inquiry immediately, we will within 60 minutes. It’s our commitment to you.
17
AEC support
and SERVICES
Dietrich offers unparalleled support, training, education and
project assistance to design, engineering and building profes-
sionals. We have the products, systems, services and compa-
nies that can help you drive cost out of the building process.
Architects and Specifiers

■ CEU On-Site and On-Line Learning
■ Technical Assistance
■ LEED* Accredited Professionals
■ On-Line Specifications, Certifications and Code-Body Approval Reports
■ Integrated Light-Gauge Framing Systems
■ National and Worldwide Availability
■ Design/Build Support and Assistance
■ Extensive Light-Gauge CAD Library
■ Prefabricated and Turnkey Light-Gauge Building Systems
Engineering and Design Professionals

■ Broadest Product Selection for Cost-Effective Design and Building
■ Boxed-Lunch Learning Sessions
■ Certified/Sealed Shop Drawings
in All 50 States
EMS
■ Extensive Light-Gauge
LTY
SYST ABLE
PART
ITION
S
CAD Library IA UNT
PEC • D EMO N
■ Design Build Assistance ON S NST

TION OFIN
G
RUC FIREPRO EMS • IN
L CO PRAYED H SYST
SUL
ATIO
HOPS
WAL IS
DRY RING • S ION FIN
T
ASTE INSULA TERIALS
D PL
■ Advanced Light-Gauge Framing ATHIN
S • L ONTROL
•
R
G AN EXTERIO LATED M
RE
A
ING
Technologies UST
ICAL CEIL OUND C
S
ACO
Contractors , 200
4
ary 5
and Builders Febru
Re: A
d e s erved
testim
onial
p
Grou
■ On-Site Product Demonstrations esign all
tr ich D Street with
D ie
Field es n say
1414 g C S ervic , we ca the cold- t
■ Certified/Sealed Shop Drawings in chnic
a l
r histo
r y
ce in e tha
Build 320 of Te ut ou ng presen to believ
in All 50 States 1 na 46 nager ugho o e
Suite ond, India r ne r, Ma a n d thro attain a str d continu Group.
m e year … st a n sign
Ham l C. K fifth
s to
ing u in the pa trich De status
■ Technical Support ichae enty- in aid ntity e
Mr M our tw nt partner e have s ulders of
aid Die tial e
tt e ntion: is is e W to essen word is th ns
A . Th sil ve. sho item e by casio
■ On-Line Submittal Builder years as been a h we ser ely on the odity , where th se few oc
Mike
, many ph hic ar comm up o
Dear ip spans sign Grou market w , rests squ a n other ering gro an d for th we
n s h e e o jus t ine n… reby
■ Products and Services that Reduce Costs elatio ich D r of th tiny to being d eng perso s w he
Our r that Dietr ing secto Inc.’s des g from committe h a REAL k passe egative
d o r r a m h m in d it ee n
and Improve Productivity can
ed m
etal f
ed D
ietric ra an
etal f edicated e speaks S occurs.
w at a w
are th NEVER h
ad a
form stiny, inde tes m d t, on AY it is r
eleva ducated, an no w-up ALW ally; . We have
our d
e
n G roup e ll - e n th o m a ti c
* LEED is a registered service mark of the Green esig taffed, w More ofte man foll e dra ur sta
ff
ich D s . u rt quit ers of yo
Dietr h its well- sionalism cessary, h uppo b
Building Council. g
throu e of profe ssage is n
s e c hn ical s us mem
te r io
m e up’s to va
epito a voice m n Gro nications DDG.
e Desig u
wher trich ral comm tion with
18 ely o
n D ie
d sev
e
assoc
ia
We r ot effecte hout our
n g
have nce throu
ie
exper
Technical Assistance
and Support
Dietrich Design Group (DDG) is the largest
light-gauge framing engineering company in
the country. DDG is licensed in all 50 states
and can supply technical assistance, design
assistance and shop drawings for projects
built anywhere in the world.
TECHNICAL assistance
& SUPPORT
Specialized Services for
Specialized Needs
FREE Preliminary Design Certified Shop

Dietrich Design Group provides unparalleled customer support through our free preliminary design
service. Customers can e-mail or fax building cross-sections, or can express mail full-size project
Drawings
plans and specifications. This valuable design service provides the critical information that can help Through our in-house engineering staff,
customers during the bidding process. Dietrich Design Group provides certified shop
drawings and calculations. This service pro-
vides our customers with the most detailed,
FREE Technical Support Hotline easy-to-use drawings and the most cost-
effective framing solutions in the industry.
We respond to more than 30,000 calls each year through our Technical Support Hotline. This unique From multi-story load-bearing structures to
and value-added service provides immediate response to engineers, architects, contractors and curtain-wall construction, no matter how big
builders ranging from general questions to detailed specification interpretations. or small the job, DDG is there to help. Our lead-
times and fees are among the best available.
The “Dietrich”
Advantage
Dietrich Metal Framing is the industry leader in
steel-framing products for the residential and
commercial markets. Dietrich Design Group
For fast, prompt supports these products through engineering
assistance call, fax or and technical expertise and superior customer
mail your questions service. Together, customers have a one-stop
or design needs to resource for completing projects on time and
the appropriate within budget — all backed by safe, reliable
DDG location. and trusted products and technical expertise.
Dietrich Design Group (North) ■ Dietrich Design Group (South) ■

1414 Field Street, Building C, Suite 1 330 Greenwood Place
Hammond, IN 46320 McDonough, GA 30253
800-873-2443 or 219-853-9474 phone 800-969-4110 or 678-304-5525 phone
219-932-4141 fax 678-304-5556 fax
19
Dietrich04_020 3/23/04 7:20 AM Page 20
INTERNATIONAL
Dietrich Metal Framing specializes in providing products and
services on a global basis. Our highly talented and well-
trained multilingual staff makes doing business a simple and
easy process. We can arrange and coordinate the entire
process through one of our many established distributors
around the world.
From the start, you will know you have chosen the right company. Our international group
located in Miami, Florida will help you every step of the way. They will begin by making
sure we are providing the exact product specifications to meet your needs. They will
provide product specifications in both metric and standard measurements. Our
specialists will analyze “best cost” methods based on numerous port
possibilities due to our extensive plant locations. We can and will assist
with arranging a freight-forwarder and also provide either flat-rack or
closed-container loading at our facilities. By offering our customers
these loading options, we can substantially reduce extra loading
costs and eliminate damage due to excessive handling.
In addition to supplying world-class products, we provide

the world-class engineering and technical assistance to
support light-gauge steel framing. Dietrich Design
Group provides the architect, contractor or developer
with preliminary member sizing, technical
recommendation, or certified shop drawings.
Our years of expertise afford us with the

knowledge and know-how to provide you with
the most economical solution and source to
meet your needs. Our extensive international
resume is a proud testament to the many
construction projects we have supplied
throughout the world. If you’re looking for an
international supply partner, look no further.
Look to Dietrich Metal Framing.

20
DMF_Cat04_Sec01_intro 3/23/04 6:49 AM Page 21
Interior (Drywall) Interior (Drywall) Deflection Interior (Drywall) Framing

Nonload-Bearing, Track Systems Products for Ceiling
Nonstructural Framing SLP-TRK® Slotted Track (BDTK)32 Applications
Drywall Nonload-Bearing Studs Long Leg (Deflection) Track Furring Channel (FC-Series™)
(ST-Series™)......................................24 (TR-Series™) with 9200 Spazzer® U-Channel (CHN-Series™) Hanger
Drywall Knockouts/Drywall Bar (SPZD) ......................................33 Wire/Tie Wire and Furring
Knockout Spacing..........................25 Long Leg (Deflection) Track Channel Clips (MFCC)..........40-41
Drywall (Nonload-Bearing) Track (TR-Series™) with U-Channel Interior (Drywall) Framing
(TR-Series™) ..............................26-28 (CHN), EasyClip™ Clip Angles Products for Various Drywall
Limiting Heights ............................30 (U-Series™) and Screws ..............34 Framing Assemblies
Drywall (Nonload-Bearing) Double Track™ (Overtrack) System Corner Angle (CA-Series™)
Hemmed Track (HTN) ................31 (OT-Series™/TR-Series™) ............35 Hemmed Corner Angle (HCN)
Interior (Drywall) Framing and 120˚/135˚ (CAEW) ............42
Products for Furring Channel (FC-Series™)
Bridging/Bracing for Walls and Ceilings ..................43
Spazzer® 9200 Bridging and Tie Wire/Hanger Wire
Spacing Bar (SPZD)......................36 (HW-Series/TW ..............................44
U-Channel (CHN-Series) Furring Channel Clips (MFCC) 44
and EasyClip™ Clip Angles Adjustable Wall Furring Bracket
(U-Series™) ......................................37 (FCWB)..............................................45
Block (TR/ST) and Strap Resilient Channels (RC-Series™)
(BP-Series™) ....................................38 for Walls and Ceilings ..........46-47
Z-Furring (ZF-Series™) ..................48
Backing Plate (BP)........................49
Danback™ Wood Backing Plate 50
Katz Blocking (KA) ........................51
Grommets (GROM) ....................52
Custom Press Brake Shapes and
Miscellaneous Angles (VD) ......53
21
Dietrich04_Sec01_022&023 3/23/04 6:51 AM Page 22
Interior (Drywall)
INTERIOR Nonload-Bearing Framing
FRAMING Dietrich Metal Framing’s nonload-bearing, non-
structural or interior framing metal studs and
OVERVIEW tracks are C-shaped channels, roll-formed from
Interior Framing Overview
corrosion resistant, galvanized steel. These chan-

Dietrich Metal Framing™ interior nels are assembled to provide efficient, low cost
framing products are used in a vari- framing for partition walls, ceilings and column
ety of interior, nonload-bearing con- fireproofing. Gypsum wallboard, veneer plaster
struction applications. The most or traditional lath and plaster is applied to the
common uses of nonload-bearing metal framing to complete the wall assembly. These assemblies are nonload-bearing,
or nonstructural metal framing are nonstructural wall systems that support gypsum panel construction. They are not
partition walls, ceilings and column designed to carry an axial load. Most nonload-bearing, nonstructural walls are con-
fireproofing in low-rise, mid-rise, structed using 25 gauge (18 mils) or 20 gauge (30 mils) stud and track. In addition,
high-rise, educational, institutional 22 gauge (27 mils) while less common, is also available.
and multi-use commercial struc-
tures. Nonload-bearing framing is Dietrich™ Metal Studs are available in 1-5/8" 2-1/2", 3-1/2", 3-5/8", 4", 5-1/2" and 6"
also used in residential applications widths or web depth. All interior studs have flanges or faces that are knurled for
including partition framing and quick screw attachment of drywall or plaster facing materials. Knurling grabs the
basement finishing. Metal framing is screw point to prevent riding (walking) or paper tears. Studs may be spaced at 12",
required in most commercial struc- 16" or 24" on-center based on wall height. Wall height, stud spacing, framing condi-
tures because it is noncombustible tion, deflection limitations and lateral load are all factors that must be considered in
and does not add fuel to the fire. determining the correct size and gauge of the applicable product.
Interior framing components are
Dietrich™ Metal Track (or runner) is available in corresponding sizes and is offered in
manufactured from corrosion resist-
a variety of leg heights including 1", 1-1/4", 2" and 3" legs. The 1-1/4" leg track is the
ant galvanized steel that offers sig-
industry standard. Additionally, 25 gauge drywall track is available with a hemmed or
nificant protection from the ele-
safety edge in certain regions. This product (referred to as hemmed track) has a 180˚
ments. In addition these framing
bend rolled into the exposed edge of the leg to create a smooth, burr-free edge for
members are precision manufac-
safer handling. Track is used to align and secure studs to floors and ceilings, and is
tured to exacting tolerances that
also used in conjunction with studs for constructing openings, headers and sills.
provide the framework for superior
Metal studs are twisted into top and bottom track and typically screw attached using
construction.
7/16" pan head framing screws.
Dietrich Metal Framing offers an
Like most products, drywall studs and track can be purchased in stock lengths, or
extensive selection of interior fram-
custom ordered to match specific job requirements. This flexibility allows the end
ing products including studs and
user to more efficiently control labor costs at the jobsite.
tracks, furring and resilient chan-
nels, deflection products, corner
angles and backing plates.
22 request a quote online @ dietrich metalframing •com The place to stop…before the building starts! SM
Overview
Interior Interior
(Drywall) (Drywall)
Deflection Framing
Track Systems Products for
bridging/
Interior Framing Overview

Deflection products and
systems are used in wall bracing
assemblies that are sub-
jected to deflection Bridging and bracing of
including seismic dis- interior nonload-bear-
turbances, foundation settling, and normal head-of-wall ing framing can be achieved through various methods.
compression. Deflection products allow for vertical move-
ment while maintaining wall integrity and fire protection. Three of the more common methods are:
■ 9200 Spazzer® Bar
A variety of deflection products can be used including:
■ U-Channel and EasyClip™ U-Series™
■ SLP-TRK* Slotted Track. Support Clips
■ Long Leg Deflection Track with Spazzer® ■ Block and Strap
bridging bar.
The purpose of bridging is to provide resistance to lateral
■ Long Leg Track with U-Channel and
EasyClip™ U-Series™ Clips. and torsional movement of the stud assembly. Bridging is
normally required when:
■ Double Track (Overtrack) System.
■ Wall sheathing does not extend to the
■ Fast Top™ Clip with Long Leg Deflection Track. underside of the ceiling deck.
A special benefit of the SLP-TRK® slotted track is that it ■ Walls are only sheathed on one side.
attaches directly to the under side of roof decks or floor/ceil-
■ It is necessary to maintain the integrity of the
ing assemblies, eliminating the need for special cutting or framework during construction.
ship laps. Firestop caulking or spray applied fireproofing is
required to achieve fire-rated performance. The SLP-TRK®‚ ■ To brace studs when using Long Leg
Deflection Track.
system has been approved for use by ICBO, the City of Los
Angeles, the Office of State Wide Health Planning and ■ When required by certain fire-rated assemblies.
Development (OSHPD) for California, and New York City.
*SLP-TRK is a registered trademark of Sliptrack Systems, Inc.
Interior
(Drywall)
Framing
Products
for various
Drywall
Framing
Assemblies
Dietrich Metal Framing offers an extensive array of drywall
framing products used in various framing conditions and
assemblies. Some of the more common applications include
wall furring, ceiling and soffit construction, sound control
and a host of other supporting partition wall products.
All of these components are manufactured to the highest
quality standards. They complement the core stud and track
product lines providing the most effective means to a fin-
ished assembly.
For more information or to contact a sales representative, see page 3. 23
Dietrich04_024&025 3/22/04 2:38 PM Page 24
Low-cost, noncombustible framing for partition

walls, ceilings and column fireproofing.
■ Roll-formed from corrosion-resistant
galvanized steel that conforms
Drywall Nonload-Bearing Studs (ST-Series™)
to ASTM C-645.
■ Prepunched knockouts for easy installation
of electrical, plumbing and bridging.
Drywall Stud
■ Knurled flanges are provided to facilitate
easier screw penetration.
Drywall or (Interior) studs are used custom lengths. Metal studs are twisted into top and bottom
in nonload-, nonstructural-bearing track and either friction fit, crimped or screw attached at 12",
wall systems that support gypsum 16" or 24" on center spacing.
panel construction. Drywall metal In contrast to wood studs, metal studs will not warp, twist
studs are available in 25, 22 and 20 or bow, resulting in straighter walls free from cracks and
gauge. Wall height, stud spacing, nail pops. Metal studs are impervious to insects, mold
deflection limitations and lateral load are all criteria used to and rot. They are noncombustible and will not add fuel
determine the proper gauge. Studs are available in stock and to a fire.
Drywall (Nonstructural) Studs (ST-Series™)
DMF Thickness Size Weight/ft. Packaging
SSMA
Product Design Thickness Pcs./ Pcs./
Reference Gauge Mils Inches (mm) lbs. (kg)
Code Inches (mm) Bundle Skid
162S125-18 1-5/8 41.3 0.263 0.119 480
250S125-18 2-1/2 63.5 0.317 0.143 480
350S125-18 3-1/2 88.9 0.378 0.171 360
STN 362S125-18 25 18 0.0188 0.48 3-5/8 92.1 0.386 0.175 10 360
400S125-18 4 101.6 0.409 0.185 360
550S125-18 5-1/2 139.7 0.575 0.260 180
600S125-18 6 152.4 0.688 0.311 180
162S125-27 1-5/8 41.3 0.391 0.177 480
250S125-27 2-1/2 63.5 0.473 0.214 240
350S125-27 3-1/2 88.9 0.565 0.256 360
STH 362S125-27 22 27 0.0283 0.72 3-5/8 92.1 0.577 0.261 10 360
400S125-27 4 101.6 0.612 0.277 360
550S125-27 5-1/2 139.7 0.750 0.339 180
600S125-27 6 152.4 0.797 0.361 180
162S125-30 1-5/8 41.3 0.430 0.195 480
250S125-30 2-1/2 63.5 0.519 0.235 240
350S125-30 3-1/2 88.9 0.621 0.281 360
STE* 362S125-30 20 DW 30 0.0312 0.79 3-5/8 92.1 0.633 0.286 10 360
400S125-30 4 101.6 0.672 0.304 360
550S125-30 5-1/2 139.7 0.825 0.373 180
600S125-30 6 152.4 0.876 0.396 180
162S125-33 1-5/8 41.3 0.476 0.215 480
250S125-33 2-1/2 63.5 0.575 0.260 240
350S125-33 3-1/2 88.9 0.688 0.311 360
STX 362S125-33 20 STR 33 0.0346 0.88 3-5/8 92.1 0.703 0.318 10 360
400S125-33 4 101.6 0.745 0.337 360
550S125-33 5-1/2 139.7 0.915 0.414 180
600S125-33 6 152.4 0.972 0.440 180
Packaging may vary by region.
Theoretical weights per foot are calculated using minimum delivered thickness.
Orders must be placed in 10-piece increments (full bundles).
*STE will be supplied for all 20-gauge orders unless STX is specifically requested.
Dietrich04_024&025 3/22/04 2:40 PM Page 25
Interior (Drywall) Nonload-Bearing, Nonstructural Framing
Conveniently placed holes

for easy installation of wiring, Varies
plumbing and bridging. Varies
Drywall Knockouts/Drywall Knockout Spacing

■ Prepunched at regular
intervals.
■ Designed to accept the
installation of standard
grommets.
■ Custom hole placement
available on request. 2'
Dietrich™ studs for interior
nonload-bearing, nonstructural 4'
framing are prepunched with
knockouts at regular intervals.
These punch-outs are
specifically designed to allow for
the rapid installation of pipes, 1-1/2" wide
electrical conduit, wiring and knockout in 3-1/2" 3/4" wide
bridging. Knockout size and and wider studs knockout
placement will vary based on in 1-5/8" and
stud size and regional preferences. 2-1/2" studs
2'
Caution: Care must be taken during installation to ensure consistent
alignment of knockouts. Conduit, grommets, hangers or insulators
must be used to keep mechanical piping and electrical wires from
direct contact with the steel.
4'
2'
2'
1'
West Coast East and Central

Punch Pattern Punch Pattern
For more information or to contact a sales representative, see page 3.

25
Dietrich04_026-029 3/22/04 2:42 PM Page 26
Economical top and bottom plate

or runner used to secure drywall
studs to the floor and ceilings.
Drywall (Nonload-Bearing) Track (TR-Series™)
■ Available in multiple leg heights.

■ Standard 10’ lengths. Custom lengths
available.
■ Legs are slightly “toed in” to provide a Drywall Track
friction grip on the studs during
installation.
Dietrich™ track or runner is manufactured from corrosion-resistant, galvanized steel for corresponding
stud sizes and gauges. The inside width of the track or web is equivalent to the outside width of the
studs. Varying leg heights are available for deflection conditions or to accommodate uneven or
inconsistent floor or ceiling conditions.
Drywall (Nonstructural) Track (TR-Series™) 1" Leg

SSMA
Product Design Thickness
Reference Gauge Mils Inches (mm) lbs. (kg) Pcs./Skid
Code Inches (mm)
162T100-18 1-5/8 41.3 0.224 0.101 350
250T100-18 2-1/2 63.5 0.278 0.126 350
350T100-18 3-1/2 88.9 0.339 0.153 350
TRNA 362T100-18 25 18 0.0188 0.48 3-5/8 92.1 0.347 0.157 350
400T100-18 4 101.6 0.370 0.167 350
550T100-18 5-1/2 139.7 0.463 0.210 120
600T100-18 6 152.4 0.493 0.223 120
162T100-27 1-5/8 41.3 0.336 0.152 350
250T100-27 2-1/2 63.5 0.417 0.189 350
350T100-27 3-1/2 88.9 0.509 0.230 350
TRHA 362T100-27 22 27 0.0283 0.72 3-5/8 92.1 0.521 0.236 350
400T100-27 4 101.6 0.556 0.252 350
550T100-27 5-1/2 139.7 0.695 0.314 120
600T100-27 6 152.4 0.741 0.335 120
162T100-30 1-5/8 41.3 0.369 0.167 350
250T100-30 2-1/2 63.5 0.458 0.207 350
350T100-30 3-1/2 88.9 0.560 0.253 350
TREA* 362T100-30 20 DW 30 0.0312 0.79 3-5/8 92.1 0.573 0.259 350
400T100-30 4 101.6 0.611 0.276 350
550T100-30 5-1/2 139.7 0.764 0.346 120
600T100-30 6 152.4 0.815 0.369 120
162T100-33 1-5/8 41.3 0.410 0.186 350
250T100-33 2-1/2 63.5 0.509 0.230 350
350T100-33 3-1/2 88.9 0.623 0.282 350
TRXA 362T100-33 20 STR 33 0.0346 0.88 3-5/8 92.1 0.637 0.288 350
400T100-33 4 101.6 0.679 0.307 350
550T100-33 5-1/2 139.7 0.849 0.384 120
600T100-33 6 152.4 0.906 0.410 120
All track must be ordered in 10-piece increments (full bundles).
1" leg track available in limited geographical areas.
*TRE will be supplied for all 20-gauge orders unless TRX is specifically requested.
Dietrich04_026-029 3/22/04 2:45 PM Page 27

Drywall (Nonstructural) Track (TR-Series™) 1-1/4" Leg
SSMA
Code Inches (mm)
162T125-18 1-5/8 41.3 0.255 0.115 480
250T125-18 2-1/2 63.5 0.308 0.139 480
350T125-18 3-1/2 88.9 0.370 0.167 360
TRNB 362T125-18 25 18 0.0188 0.48 3-5/8 92.1 0.378 0.171 360
400T125-18 4 101.6 0.401 0.181 360
550T125-18 5-1/2 139.7 0.493 0.223 120
600T125-18 6 152.4 0.524 0.237 120
162T125-27 1-5/8 41.3 0.382 0.173 480
250T125-27 2-1/2 63.5 0.463 0.210 480
350T125-27 3-1/2 88.9 0.556 0.252 360
TRHB 362T125-27 22 27 0.0283 0.72 3-5/8 92.1 0.567 0.257 360
400T125-27 4 101.6 0.602 0.272 360
550T125-27 5-1/2 139.7 0.741 0.335 120
600T125-27 6 152.4 0.787 0.356 120
162T125-30 1-5/8 41.3 0.420 0.190 480
250T125-30 2-1/2 63.5 0.509 0.230 480
350T125-30 3-1/2 88.9 0.611 0.276 360
TREB* 362T125-30 20 DW 30 0.0312 0.79 3-5/8 92.1 0.624 0.282 360
400T125-30 4 101.6 0.662 0.300 360
550T125-30 5-1/2 139.7 0.815 0.369 120
600T125-30 6 152.4 0.866 0.392 120
162T125-33 1-5/8 41.3 0.467 0.211 480
250T125-33 2-1/2 63.5 0.566 0.256 480
350T125-33 3-1/2 88.9 0.679 0.307 360
TRXB 362T125-33 20 STR 33 0.0346 0.88 3-5/8 92.1 0.694 0.314 360
400T125-33 4 101.6 0.736 0.333 360
550T125-33 5-1/2 139.7 0.906 0.410 120
600T125-33 6 152.4 0.963 0.436 120

27
Dietrich04_026-029 3/22/04 2:46 PM Page 28

SSMA
Code Inches (mm)
250T200-18 2-1/2 63.5 0.401 0.181 120
350T200-18 3-1/2 88.9 0.463 0.210 100
362T200-18 3-5/8 92.1 0.470 0.213 100

TRND 25 18 0.0188 0.48
400T200-18 4 101.6 0.493 0.223 100
550T200-18 5-1/2 139.7 0.586 0.265 72
600T200-18 6 152.4 0.617 0.279 72
250T200-27 2-1/2 63.5 0.602 0.272 120
350T200-27 3-1/2 88.9 0.695 0.314 100
362T200-27 3-5/8 92.1 0.706 0.319 100
TRHD 22 27 0.0283 0.72
400T200-27 4 101.6 0.741 0.335 100
550T200-27 5-1/2 139.7 0.880 0.398 72
600T200-27 6 152.4 0.926 0.419 72
250T200-30 2-1/2 63.5 0.662 0.300 120
350T200-30 3-1/2 88.9 0.764 0.346 100
362T200-30 3-5/8 92.1 0.777 0.352 100
TRED* 20 DW 30 0.0312 0.79
400T200-30 4 101.6 0.815 0.369 100
550T200-30 5-1/2 139.7 0.968 0.438 72
600T200-30 6 152.4 1.019 0.461 72
250T200-33 2-1/2 63.5 0.736 0.333 120
350T200-33 3-1/2 88.9 0.849 0.384 100
362T200-33 3-5/8 92.1 0.863 0.390 100
TRXD 20 STR 33 0.0346 0.88
400T200-33 4 101.6 0.906 0.410 100
550T200-33 5-1/2 139.7 1.076 0.487 72
600T200-33 6 152.4 1.133 0.513 72

250T300-18 2-1/2 63.5 0.524 0.238 120
350T300-18 3-1/2 88.9 0.586 0.266 100
362T300-18 3-5/8 92.1 0.594 0.269 100
TRNF 25 18 0.0188 0.48
400T300-18 4 101.6 0.617 0.280 100
550T300-18 5-1/2 139.7 0.709 0.322 72
600T300-18 6 152.4 0.740 0.336 72
250T300-27 2-1/2 63.5 0.602 0.273 120
350T300-27 3-1/2 88.9 0.695 0.315 100
362T300-27 3-5/8 92.1 0.706 0.320 100
TRHF 22 27 0.0283 0.72
400T300-27 4 101.6 0.741 0.336 100
550T300-27 5-1/2 139.7 0.880 0.399 72
600T300-27 6 152.4 0.926 0.420 72
250T300-30 2-1/2 63.5 0.866 0.393 120
350T300-30 3-1/2 88.9 0.968 0.439 100
362T300-30 3-5/8 92.1 0.981 0.445 100
TREF* 20 DW 30 0.0312 0.79
400T300-30 4 101.6 1.019 0.462 100
550T300-30 5-1/2 139.7 1.172 0.532 72
600T300-30 6 152.4 1.223 0.555 72
250T300-33 2-1/2 63.5 0.963 0.437 120
350T300-33 3-1/2 88.9 1.076 0.488 100
362T300-33 3-5/8 92.1 1.090 0.494 100
TRXF 20 STR 33 0.0346 0.88
400T300-33 4 101.6 1.133 0.514 100
550T300-33 5-1/2 139.7 1.303 0.591 72
600T300-33 6 152.4 1.359 0.616 72
Dietrich04_026-029 3/22/04 2:48 PM Page 29
What makes Dietrich such a

good manufacturer is not
simply products or prices, but
how they go to market, what
they stand for. As a distributor,
we not only strive for success,
but doing it the right way. There
are no shortcuts, and values
such as honesty, integrity, and
trust cannot be substituted.
This is what Dietrich stands for,
and why we value our
association.
— Bob Ruff
Tamarack Materials/GMS
Bloomington, MN
Dietrich is clearly one of the

most innovative companies
in the construction industry.
Their marketing and sales
departments are second
to none. These attributes
combined with excellent
quality and service make
Dietrich the go-to supplier
for metal framing products.
— Dan Graves
Rew Materials
Columbus, OH
Dietrich has always been in

the forefront of our industry
in both customer service
and technical support.
— Tony Lee
Westside Building Materials
Anaheim, CA

29
Dietrich04_030&031 3/22/04 2:50 PM Page 30
Interior, Nonstructural, Composite Limiting Heights

Interior nonload-bearing partitions are not designed to carry axial loads. Limiting heights are based on stress or deflection limits for
given lateral loads. Height limitations depend on the gauge of the steel used, dimensions of the stud, stud spacing and the allowable
deflection limit. The composite limiting heights include the contribution of the gypsum wallboard sheathing on both sides of the wall.
MEMBER LATERAL LOAD
Limiting Heights
Design Thickness 5 psf 7.5 psf 10 psf

Spacing
Depth Designation Gauge Mils Deflection Limit Deflection Limit Deflection Limit
Inches (mm)
Inches L/120 L/240 L/360 L/120 L/240 L/360 L/120 L/240 L/360
12 11' 2" 8' 10" 6' 7" 9' 9'' 6' 7" 5' 9" 8' 10'' 6' 0" 5' 3"
STN 25 18 0.0188 0.48 16 10' 7" 8' 4" 6' 0" 8' 10'' f 6' 0" 5' 3" 8' 4'' 5' 5" 4' 9"
24 9' 9" f 7' 11" 5' 3" 8' 0'' f 5' 3" 4' 7" 5' 4" 4' 9" 4' 2"
12 12' 5" 9' 11" 8' 0" 10' 10" 8' 0" 7' 0" 9' 11" 7' 3" 6' 4"
1-5/8" STE* 20 DW 30 0.0312 0.79 16 11' 6" 9' 2" 7' 3" 10' 1" 7' 3" 6' 4" 9' 2" 6' 7" 5' 9"
24 10' 5" 8' 3" 6' 4" 9' 2" 6' 4" 5' 7" 8' 3" 5' 9" 5' 0"
12 13' 0" 10' 4" 9' 0'' 11' 4'' 9' 0'' 7' 3" 10' 4'' 7' 6" 6' 7"
STX 20 STR 33 0.0346 0.88 16 12' 1" 9' 8" 8' 5'' 10' 7'' 8' 5'' 6' 7" 9' 8'' 6' 10" 6' 0"
24 11' 0" 8' 9" 7' 8'' 9' 7'' 7' 8'' 5' 9" 8' 9'' 6' 0" 5' 3"
12 15' 1" 11' 11" 10' 5'' 12' 4'' f 10' 5'' 9' 1'' 10' 9'' f 9' 6'' 7' 3"
STN 25 18 0.0188 0.48 16 13' 3" f 11' 3" 9' 10'' 10' 10'' f 9' 10'' 8' 7'' 9' 5'' f 8' 11'' 6' 7"
24 11' 10" f 10' 7" 9' 3'' 9' 8'' f 9' 3'' 8' 1'' 8' 5'' f 8' 5'' 5' 9"
12 16' 8'' 13' 2'' 11' 6'' 14' 7'' 11' 6'' 10' 0'' 13' 2'' 10' 5'' 9' 1''
2-1/2" STE* 20 DW 30 0.0312 0.79 16 15' 4'' 12' 1'' 10' 6'' 13' 4'' 10' 6'' 9' 2'' 12' 1'' 9' 6'' 8' 4''
24 13' 9'' 10' 9'' 9' 4'' 11' 11'' 9' 4'' 8' 1'' 10' 9'' 8' 6'' 7' 4''
12 17' 9" 13' 11" 12' 1'' 15' 6'' 12' 1'' 10' 6'' 13' 11'' 10' 11'' 9' 5''
STX 20 STR 33 0.0346 0.88 16 16' 5" 12' 10" 11' 2'' 14' 4'' 11' 2'' 9' 8'' 12' 10'' 10' 0'' 8' 8''
24 14' 10" 11' 7" 10' 0'' 13' 0'' 10' 0'' 8' 7'' 11' 7'' 8' 11'' 7' 8''
12 17' 8" f 15' 4" 13' 3'' 14' 3'' f 13' 3'' 11' 7'' 12' 5'' f 12' 0'' 10' 5''
STN 25 18 0.0188 0.48 16 15' 4" f 14' 4" 12' 4'' 12' 5'' f 12' 5'' 10' 10'' 10' 9'' f 10' 9'' f 9' 9''
24 13' 9" f 13' 5" 11' 7'' 11' 0'' f 11' 0'' f 10' 1'' 9' 5'' f 9' 5'' f 9' 1''
12 21' 8'' 17' 1'' 14' 10'' 18' 11'' 14' 10'' 12' 10'' 17' 1'' 13' 5'' 11' 8''
3-5/8" STE* 20 DW 30 0.0312 0.79 16 19' 11'' 15' 8'' 13' 7'' 17' 5'' 13' 7'' 11' 9'' 15' 8'' 12' 3'' 10' 7''
24 17' 9'' 14' 0'' 12' 0'' 15' 6'' 12' 0'' 10' 5'' 14' 0'' 10' 10'' 9' 4''
12 22' 6" 17'10" 15' 6'' 19' 8'' 15' 6'' 13' 7'' 17' 10'' 14' 1'' 12' 4''
STX 20 STR 33 0.0346 0.88 16 20' 8" 16' 5" 14' 3'' 18' 1'' 14' 3'' 12' 6'' 16' 5'' 12' 11'' 11' 4''
24 18' 6" 14' 9" 12' 9'' 16' 2'' 12' 9'' 11' 2'' 14' 9'' 11' 7'' 10' 1''
12 19' 6" f 16' 5'' 14' 4'' 15' 9'' f 14' 4'' 12' 6'' 13' 8'' f 13' 0'' 11' 4''
STN 25 18 0.0188 0.48 16 17' 2" f 15' 4'' 13' 4'' 13' 10'' f 13' 4'' 11' 8'' 11' 11'' f 11' 11'' f 10' 6''
24 15' 1" f 14' 2'' 12' 4'' 12' 1'' f 12' 1'' f 10' 9'' 10' 5'' f 10' 5'' f 9' 9''
12 24' 0'' 19' 0'' 16' 6'' 20' 11'' 16' 6'' 14' 4'' 19' 0'' 14' 11'' 12' 11''
4" STE* 20 DW 30 0.0312 0.79 16 22' 0'' 17' 6'' 15' 2'' 19' 3'' 15' 2'' 13' 1'' 17' 6'' 13' 8'' 11' 10''
24 19' 8'' 15' 7'' 13' 5'' 17' 1'' f 13' 5'' 11' 7'' 14' 9'' f 12' 1'' 10' 5''
12 25' 1" 19' 11'' 17' 4'' 21' 11'' 17' 4'' 15' 0'' 19' 11'' 15' 8'' 13' 7''
STX 20 STR 33 0.0346 0.88 16 23' 1" 18' 4'' 15' 11'' 20' 2'' 15' 11'' 13' 9'' 18' 4'' 14' 5'' 12' 6''
24 20' 9" 16' 5'' 14' 3'' 18' 1'' 14' 3'' 12' 4'' 16' 5'' 12' 10'' 11' 2''
12 22' 10" 22' 1'' 19' 4'' 18' 7'' f 18' 7'' f 16' 9'' 16' 2'' f 16' 2'' f 15' 0''
STN 25 18 0.0188 0.48 16 19' 9" f 19' 9'' f 17' 11'' 16' 2'' f 16' 2'' f 15' 7'' 14' 0'' f 14' 0'' f 13' 10''
24 16' 9" f 16' 9'' f 16' 9'' f 13' 5'' f 13' 5'' f 13' 5'' f 11' 5'' f 11' 5'' f 11' 5'' f
12 32' 1'' 25' 6'' 22' 3'' 28' 0'' 22' 3'' 19' 5'' 24' 7'' f 20' 3'' 17' 6''
6" STE* 20 DW 30 0.0312 0.79 16 29' 2'' 23' 2'' 20' 3'' 24' 9'' f 20' 3'' 17' 8'' 21' 5'' f 18' 4'' 15' 10''
24 25' 1'' f 20' 3'' 17' 8'' 20' 6'' f 17' 8'' 15' 5'' 17' 9'' f 16' 0'' 13' 8''
12 33' 9" 26' 9'' 23' 5'' 29' 6'' 23' 5'' 20' 6'' 26' 9'' 21' 3'' 18' 7''
STX 20 STR 33 0.0346 0.88 16 30' 10" 24' 6'' 21' 4'' 27' 0'' 21' 4'' 18' 9'' 24' 6'' 19' 5'' 17' 0''
24 27' 2" 21' 7'' 18' 10'' 23' 10'' 18' 10'' 16' 7'' 19' 1'' s 17' 2'' 15' 0''
f: Flexural stress controls allowable wall height.

s: Shear/web crippling controls allowable wall height.
*STE will be supplied for all 20-gauge orders unless STX is specifically requested.
Dietrich04_030&031 3/22/04 2:52 PM Page 31
Hemmed or safety edges

provide protection during
handling and installation.
Drywall (Nonload-Bearing) Hemmed Track (HTN)

■ Increased jobsite safety.
■ Standard 10’ length. Custom lengths available.
■ Available in 25 gauge with 1-1/4” legs.
Dietrich™ hemmed track or runner is manufactured from

corrosion-resistant galvanized steel. The hemmed edge has
a 180˚ bend rolled into the exposed edge of the leg to
create a smooth burr-free edge for safer handling. This
product is only available in 25 gauge with 1-1/4" legs.
Hemmed Track
Drywall (Nonstructural) Hemmed Track (HTN)

Gauge Mils Inches (mm) lbs. (kg) Pcs./Skid
Code Inches (mm)
1-5/8 41.3 0.263 0.119 480
2-1/2 63.5 0.317 0.143 480
3-5/8 92.1 0.386 0.175 360
HTN 25 18 0.0188 0.48
4 101.6 0.409 0.185 360
5-1/2 139.7 0.575 0.260 120
6 152.4 0.688 0.311 120
*All track must be ordered in 10-piece increments (full bundles).
*This product is not available in all geographic areas.

31
Dietrich04_032&033 3/22/04 2:54 PM Page 32
Most cost-effective, positively attached

fire-rated deflection system.
■ Positive attachment that allows up to 1”
of vertical movement.
SLP-TRK® Slotted Track (BDTK)
■ Meets BOCA, SBCCI, ASTM, UL2079, IBC

and UBC building codes and standards.
SLP-TRK®
■ UL** Approved 1- and 2-hour systems.
■ Single track assembly.
It’s a real challenge meeting head-of-wall codes for fire stop and Meeting Code Requirements
life safety while maintaining the ability to absorb vertical SLP-TRK® slotted track has achieved the following building
movement in low-, mid- and high-rise buildings. SLP-TRK* slotted code approvals:
track is the solution.
• ICBO-ER 5344 • LA City RR25344
SLP-TRK® slotted track provides a positive attachment for wall
• UL Classified R19236 • OSHPD R#0371
strength and allows for vertical movement. Movement caused by
normal head-of-wall and floor extension or compression is • UL Certified for • NY City MEA 285-01-M
absorbed by SLP-TRK® slotted track to prevent damage to the Canada XHL17
wall assembly. SLP-TRK® slotted track meets requirements
SLP-TRK® slotted track integrates smoothly with a variety of wall of all standard building codes:
installation systems and is extremely user-friendly, as well as • IBC • SBCCI
economical. The simple design and easy installation reduces the
• BOCA • UBC
cost of materials and labor.
SLP-TRK® slotted track systems comply with the toughest code • In addition, SLP-TRK® slotted track
requirements in the country, if not the world. It’s been tested complies with the requirements of
with a variety of leading fire-stop products and has outperformed ASTM and UL2079.
the requirements of stringent fire and hose stream testing ASTM U.S. Patent No. 5,127,760
E-119, ASTM E-814. SLP-TRK also has met and exceeded the latest
seismic cycling standards found in UL2079 and ASTM 1966.

DMF Thickness Size*** Weight/ft. Packaging
Gauge Mils Inches (mm) lbs. (kg)
2-1/2 63.5 0.484 0.219 112
3-5/8 92.1 0.556 0.252 100
BDTK 25 18 0.0188 0.48 4 101.6 0.580 0.262 90
6 152.4 0.708 0.320 60
8 203.2 0.836 0.378 50
2-1/2 63.5 0.882 0.399 112
3-5/8 92.1 1.015 0.459 100
BDTK 20 33 0.0346 0.88 4 101.6 1.059 0.479 90
6 152.4 1.294 0.586 60
8 203.2 1.529 0.692 50
2-1/2 63.5 1.150 0.520 112
3-5/8 92.1 1.323 0.599 100
BDTK 18 43 0.0451 1.14 4 101.6 1.380 0.624 N/A 90
6 152.4 1.687 0.763 60
8 203.2 1.993 0.902 50
2-1/2 63.5 1.443 0.653 112
3-5/8 92.1 1.660 0.751 100
BDTK 16 54 0.0566 1.44 4 101.6 1.732 0.784 90
6 152.4 2.117 0.958 60
8 203.2 2.502 1.132 50
2-1/2 63.5 1.818 0.823 112
3-5/8 92.1 2.091 0.946 100
BDTK 14 68 0.0713 1.81 4 102.6 2.182 0.987 90
6 152.4 2.667 1.207 60
8 203.2 3.152 1.426 50
*SLP-TRK is a registered trademark of SlipTrack Systems, Inc.

**UL and UL Classified are trademarks of Underwriters Laboratories, Inc.
***Custom sizes available upon request.
Dietrich04_032&033 3/22/04 2:56 PM Page 33
Interior (Drywall) Deflection Track Systems
Rapidly installed prenotched, prespaced

interior deflection system that saves time
and eliminates materials.
Long Leg (Deflection) Track (TR-Series™) with Spazzer® 9200 Bar (SPZD)
■ Eliminates high material cost of custom-made head tracks.
■ Requires only a single generic Deep Leg track to provide deflection.
■ Facilitates sprayable Intumescent/Elastomeric firestops.
■ Eliminates stud spacing layout at deck.
■ Improves drywall hanging since bow is removed from tall studs.
■ Automatically positions and rigidly holds studs on 16”
or 24” centers without fasteners in the head track.
Dietrich™ TradeReady® Spazzer® 9200 is a prenotched, 20-gauge, galvanized Spazzer® 9200
steel spacer bar engineered to handle deflection at the head track of Deep Leg
interior nonstructural stud walls. The prenotched slots and gripping power Track
of the 50-inch bar holds studs into a rigid, accurately laid out gridwork that
has excellent resistance to stud rotation and displacement.
The Spazzer® 9200 spacer bar saves time and materials by eliminating the
cost of custom head tracks and the time required to fasten and remove
screws or layout stud spacing at the deck. Hanging drywall is also faster
and easier because the Spazzer® 9200 spacer bar eliminates the bow that
often occurs in tall interior studs.
U.S. Patent Nos. 5,784,850 and 6,021,618
Long Leg (Deflection) Track (TR-Series™)

DMF Thickness Size* Weight/ft. Packaging
SSMA
TRND 362T200-18 3-5/8 92.1 0.470 0.213 NA 100
25 18 0.0188 0.48
2" Leg 600T200-18 6 152.4 0.617 0.279 NA 72
TRED 362T200-30 3-5/8 92.1 0.777 0.352 NA 100
20 30 0.0312 0.79
2" Leg 600T200-30 6 152.4 1.019 0.461 NA 72
TRNF 362T300-18 3-5/8 92.1 0.594 0.269 NA 100
25 18 0.0188 0.48
3" Leg 600T300-18 6 152.4 0.740 0.335 NA 72
TREF 362T300-30 3-5/8 92.1 0.981 0.444 NA 100
20 30 0.0312 0.79
3" Leg 600T300-30 6 152.4 1.223 0.553 NA 72
*Custom sizes available on request.
Spazzer® 9200 (SPZD)

SSMA
7/8 x 7/8 22.2 x 22.2
SPZD NA 20 33 0.0346 0.88 0.24 0.11 NA 1350
x 50 x 1270

33
Dietrich04_034&035 3/22/04 2:58 PM Page 34
Traditional, single-track deflection system.

Long Leg (Deflection) Track (TR-Series™) with U-Channel (CHN-Series™), EasyClip™ Clip Angles (U-Series™) and Screws
Deep Leg Track

■ Nonproprietary system.
■ Traditional framing components.
■ Requires U-Channel
and EasyClip™ U-Series™ Support Clips.
This traditional assembly

allows for the deflection of
floor beams or floor decks
above interior partitions.
The single, deep leg track U-Channel
assembly requires 1-1/2"
cold-rolled channel (CHN2)
and 1-1/2" x 1-1/2" 16-gauge
(EasyClip™ U-Series™) clip
angles, installed continuously
throughout the upper most
punchouts (must be a
maximum of 12" from the top track) to align the studs vertically
within the plane of the wall. Deflection track details must be
designed for the specific conditions of a building to accommodate
the required deflection and end reactions of the studs.
EasyClip™ U-Series™ Clip

SSMA
TRND 362T200-18 3-5/8 92.1 0.470 0.213 NA 100
25 18 0.0188 0.48
2" Leg 600T200-18 6 152.4 0.617 0.279 NA 72
TRED 362T200-30 3-5/8 92.1 0.777 0.352 NA 100
20 30 0.0312 0.79
2" Leg 600T200-30 6 152.4 1.019 0.461 NA 72
TRNF 362T300-18 3-5/8 92.1 0.594 0.269 NA 100
25 18 0.0188 0.48
3" Leg 600T300-18 6 152.4 0.740 0.335 NA 72
TREF 362T300-30 3-5/8 92.1 0.981 0.444 NA 100
20 30 0.0312 0.79
3" Leg 600T300-30 6 152.4 1.223 0.553 NA 72
U-Channel (CHN-Series™)
SSMA
CHN1 075U50-54 16 54 0.0566 1.44 3/4 19.1 0.25 0.11 10 360
CHN2 150U50-54 16 54 0.0566 1.44 1-1/2 38.1 0.42 0.19 10 330
*Available in 10', 16' and 20' lengths.
EasyClip™ U-Series™ Clip Angles

SSMA
Product Design Thickness Pcs./
Code Inches (mm) Bucket
U543 NA 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 3-3/8 38.1 x 38.1 x 85.7 0.16 0.07 400
U545 NA 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 5-3/4 38.1 x 38.1 x 146 0.28 0.13 200
U547 NA 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 7-3/4 38.1 x 38.1 x 197 0.37 0.17 100
Dietrich04_034&035 3/22/04 3:00 PM Page 35
Interior (Drywall) Deflection Track Systems
Traditional, double track

or track-over-track system. Overtrack
■ Eliminates bridging at the top row of knockouts.
DoubleTrack™ (Overtrack) System (OT-Series™/TR-Series™)

■ Requires custom top track/longer lead times.
Dietrich™ DoubleTrack™ system is a two-piece top track

assembly that allows for the deflection of floor beam or
floor decks along interior partitions. A custom-made deep
leg outer track is installed to the underside of the floor Deep Leg Track
deck. A wall assembly is constructed on the floor then slid
into place. The wall assembly is designed to allow a “gap”
at the top for deflection. The track-over-track assembly,
although still used, is becoming less and less common.
The development of innovative deflection systems like
the SLP-TRK* System (page 32) has significantly improved
and streamlined the assembly process.
DoubleTrack™ (Overtrack) System (OT-Series™/TR-Series™)

DMF Thickness Size Weight/ft.
SSMA
Code Inches (mm)
OTEC 375T150-30 3-3/4 95.3 0.758 0.343
20 30 0.0312 0.79
1-1/2" Leg 612T150-30 6-1/8 155.6 1.027 0.465
OTED 375T200-30 3-3/4 95.3 0.871 0.394
20 30 0.0312 0.79
2" Leg 612T200-30 6-1/8 155.6 1.140 0.516
OTEF 375T300-30 3-3/4 95.3 1.098 0.497
20 30 0.0312 0.79
3" Leg 612T300-30 6-1/8 155.6 1.367 0.619
Custom sizes available on request.

SSMA
TRND 362T200-18 3-5/8 92.1 0.470 0.213 NA 100
25 18 0.0188 0.48
2" Leg 600T200-18 6 152.4 0.617 0.279 NA 72
TRED 362T200-30 3-5/8 92.1 0.777 0.352 NA 100
20 30 0.0312 0.79
2" Leg 600T200-30 6 152.4 1.019 0.461 NA 72
TRNF 362T300-18 3-5/8 92.1 0.594 0.269 NA 100
25 18 0.0188 0.48
3" Leg 600T300-18 6 152.4 0.740 0.335 NA 72
TREF 362T300-30 3-5/8 92.1 0.981 0.444 NA 100
20 30 0.0312 0.79
3" Leg 600T300-30 6 152.4 1.223 0.553 NA 72

35
Dietrich04_036&037 3/22/04 3:02 PM Page 36
Save up to 40% in combined

labor and materials costs!
Spazzer® 9200 Bridging and Spacing Bar (SPZD)
■ Improves drywall installation speed.

■ Automatically positions and rigidly holds studs
on 16” or 24” centers without fasteners.
■ Eliminates clip angles and the labor required
to install them.
The TradeReady® Spazzer® 9200 bar is a prenotched, 20-gauge,

galvanized steel spacer and bridging bar. The Spazzer 9200 bar Spazzer® 9200
facilitates rapid erection of studs into a rigid, accurately laid out
gridwork that has excellent resistance to stud rotation and
displacement. Hanging drywall is also faster and easier because
the Spazzer® 9200 bar
eliminates the bow
that often occurs in tall
interior studs.
TradeReady® Spazzer®
9200 bar is a 20-gauge
bar that is 50" long and
prenotched to hold
studs rigidly on 16" or
24" centers. The slots
have been pre-
engineered to hold
studs in place by
utilizing “shear”
to bridge studs into
a rigid gridwork.
U.S. Patent Nos. 5,784,850 and 6,021,618
Available for
Overnight
Delivery!
Spazzer® 9200 Bridging and Spacing Bar (SPZD)

7/8 x 7/8 22.2 x 22.2
SPZD 20 33 0.0346 0.88 0.24 0.11 NA 1350
x 50 x 1270
Dietrich04_036&037 3/22/04 3:04 PM Page 37
Interior (Drywall) Framing Products for Bridging/Bracing
Traditional bridging system that

provides rigidity and lateral support
to the constructed framework.
U-Channel (CHN-Series™) and EasyClip™ U-Series™ Clip Angles

U-Channel
■ Prevents twisting and lateral movement.
■ Traditional system.
■ EasyClip™ U-Series™ clips are prepunched for faster EasyClip™ U-Series™ Clip
installation.
Dietrich™ U-Channel is available in 16-gauge corrosion-
resistant galvanized steel. The product is available in four
widths of 3/4", 1-1/2" and 2". For bridging, 1-1/2" and 3/4"
are utilized with the 1-1/2" channel as the predominant size
used in bridging
applications. Standard
lengths are 10', 16' and
20'. Custom lengths are
available on request.
To brace steel studs
laterally, the channel is
inserted through the
punched knockouts of
the framing members at
specified vertical
spacing. An EasyClip™
U-Series™ clip is then
screw attached to both
the U-Channel and the
framing member. The U-
Channel must be
secured with clips to
provide resistance and
proper bracing.
SSMA
CHN1 075U50-54 16 54 0.0566 1.44 3/4 19.1 0.25 0.11 10 360
CHN2 150U50-54 16 54 0.0566 1.44 1-1/2 38.1 0.42 0.19 10 330

U543 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 3-3/8 38.1 x 38.1 x 85.7 0.16 0.07 400
U545 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 5-3/4 38.1 x 38.1 x 146 0.28 0.13 200
U547 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 7-3/4 38.1 x 38.1 x 197 0.37 0.17 100

Dietrich04_038&039 3/22/04 3:07 PM Page 38
Full-depth bracing that restricts

rotation and movement. Flat Strap
■ Used as bridging when framing members

Block (TR/ST) and Strap (BP-Series™)
are unpunched.
■ Eliminates the need for clips.
■ Provides alternative bridging when knockouts
do not align.
Blocking is field cut from the same size excess track. Solid
blocking is made by cutting the flanges of the material and
bending the web to form a 4" overlap on the wall member.
Drywall Stud
Solid blocking is installed in the first and last two bays of
each wall section, with one additional block every 8' of wall.
Continuous strapping, 2" x 20 gauge or heavier as specified,
is then installed on both stud faces, or one face if the
opposite side is fully sheathed.
Block (TR/ST)
Blocking is typically field cut from the same or heavier excess track stock and secured between wall studs. Stud stock is also an option. Studs are
attached using EasyClip™ U- or S-Series™ clip angles. Blocking should be installed in the first two bays, the last two bays and every 8 feet.
Strapping (BP-Series™)
DMF Thickness Size Length Weight/ft. Packaging
Gauge Mils Inches (mm) ft. (m) lbs. (kg)
Code Inches (mm) Skid
2 50.8 10 3.05 0.129 0.058 200
3 76.2 10 3.05 0.194 0.088 200
4 101.6 10 3.05 0.258 0.117 200
BPN 25 18 0.0188 0.48 6 152.4 10 3.05 0.387 0.175 200
8 203.2 10 3.05 0.516 0.234 200
10 254.0 10 3.05 0.645 0.292 200
12 304.8 10 3.05 0.774 0.350 200
2 50.8 10 3.05 0.214 0.097 200
3 76.2 10 3.05 0.321 0.145 200
4 101.6 10 3.05 0.428 0.194 200
BPE 20 30 0.0312 0.79 6 152.4 10 3.05 0.642 0.291 200
8 203.2 10 3.05 0.857 0.388 200
10 254.0 10 3.05 1.071 0.485 200
12 304.8 10 3.05 1.285 0.581 200
Dietrich04_038&039 3/22/04 3:10 PM Page 39
Interior (Drywall) Framing Products for Bridging/Bracing
Photo courtesy of GQ Contracting Private residence of Marc LaCerte, M&R Drywall
I estimate the Spazzer® Bridging and The Spazzer® bar has contributed
Spacing Bar saves me $1.00 a stud due to significantly to reducing our labor costs
increased production efficiencies. and improving our productivity.
— Jim Tribbie — Jeff Pelletier
South Texas Drywall Pelletier & Sons, Inc.
Columbus, OH Fitchburg, MA
Dietrich’s Clip ExpressSM service is awesome! The industry’s widest

selection of deflection, bridging, rigid, general purpose, and
specialty clips at econmical prices when and where we need them.
— Gary Hensyle
Allied Construction
Des Moines, Iowa

39
Dietrich04_040&041 3/22/04 3:13 PM Page 40
Rigid structural support

for gypsum wallboard, veneer
plaster or drop ceiling
assemblies.
Furring Channel (FC-Series™) U-Channel (CHN-Series™) Hanger Wire/Tie Wire and Furring Channel Clips (MFCC)
■ Commonly used non-combustible ceiling assembly.

■ Rigid framework for high-quality finish.
■ Furring clips easily snap into place for fast assembly. Furring Channel
In a ceiling assembly 1-1/2" or larger, U-Channel is

suspended from the overhead structure using hanger wire.
Drywall furring channel is commonly clipped or wire-tied
perpendicular to the underside of the U-Channel at
appropriate intervals for screw-attaching drywall. U-Channel
Assemblies are installed per the project specification
or ASTM C754 requirements.
Furring channel can
also be attached
directly to the
underside of bar joists.
The furring is installed
perpendicular to the
joists and wire-tied at
appropriate intervals.
Wire ties are required
for fire-rated and
multilayer assemblies.
Furring Channel (FC-Series™)

SSMA
FCN 087F125-18 25 18 0.0188 0.48 0.237 0.107 10 560
FCE 087F125-30 20 30 0.0312 0.79 0.388 0.176 NA 420
7/8 22.2
FCM 087F125-43 18 43 0.0451 1.15 0.555 0.251 NA 250
FCM 087F125-54 16 54 0.0566 1.44 0.670 0.303 NA 250
FCND 150F125-18 25 18 0.0188 0.48 0.312 0.141 NA 500
FCED 150F125-30 20 30 0.0312 0.79 0.512 0.232 NA 500
1-1/2 38.1
FCMD 150F125-43 18 43 0.0451 1.15 0.733 0.332 NA 250
FCMD 150F125-54 16 54 0.0566 1.44 0.920 0.416 NA 250
SSMA
CHN1 075U50-54 16 54 0.0566 1.44 3/4 19.1 0.285 0.129 10 360
CHN2 150U50-54 16 54 0.0566 1.44 1-1/2 38.1 0.424 0.192 10 330
Dietrich04_040&041 3/22/04 3:17 PM Page 41
Interior (Drywall) Framing Products for Ceiling Applications
Furring Channel (FC-Series™) U-Channel (CHN-Series™) Hanger Wire/Tie Wire and Furring Channel Clips (MFCC)
Available for
Overnight
Delivery!
Hanger Wire (HWB8, HWB9, HW12)
DMF Length Weight/Bundle Packaging
Product Gauge Bundles/
ft. (m) lbs. (kg)
Code Skid
HWB8 8 12 3.66 50 22.62 20 Hanger Wire
HWB9 9 12 3.66 50 22.62 20
HW12 12 12 3.66 50 22.62 20
Tie Wire (TW18)

DMF Length Weight/Box
Product Gauge Inches (mm) lbs. (kg)
Code
24 610 25 11.31
Tie Wire
TW18 18 28 711 25 11.31
48 1219 50 22.62
Furring Channel Clips (MFCC)

DMF Weight/Box
Furring
Pcs./ Channel
Product Box lbs. (kg) Clip
Code
MFCC 500 20 9.05

41
Dietrich04_042&043 3/22/04 3:20 PM Page 42
Utility angles used to connect, reinforce

or secure metal stud framing in various
drywall applications.
Corner Angle (CA-Series™) Hemmed Corner Angle (HCN) and 120˚/135˚ (CAEW)
■ Available in numerous sizes and gauges. Corner Angle

■ Knurled legs and hemmed edges available.
■ Custom sizes, bends and lengths available.
Corner angle is a multipurpose 90˚ or 120˚/135˚

galvanized angle used in dozens of framing applications.
Splayed
Some of the most common applications include lapped Corner Angle
framing conditions, soffit framing, floor and ceiling runner,
chase wall construction and laminated gypsum drywall
partitions.
Corner Angle (CA-Series™), Hemmed Corner Angle (HCN) and 120˚/135˚ (CAEW)
Product Gauge Mils Design Thickness Pcs./
Inches (mm) ft. (m) lbs. (kg)
5/8 x 2 15.9 x 50.8 0.150 0.068 500
7/8 x 1-3/8 22.2 x 34.9 0.160 0.072 500
CAN 90˚ 25 18 0.0188 0.48 1-1/2 x 1-1/2 38.1 x 38.1 10 3.05 0.170 0.077 500
2x2 50.8 x 50.8 0.290 0.131 500
3x3 76.2 x 76.2 0.430 0.195 500
1-1/2 x 1-1/2 38.1 x 38.1 0.170 0.077 500
CANW 135˚ 25 18 0.0188 0.48 10 3.05
2x2 50.8 x 50.8 0.250 0.113 500
HCN (Hemmed) 90˚ 25 18 0.0188 0.48 2x2 50.8 x 50.8 10 3.05 0.270 0.122 500
5/8" x 2 15.9 x 50.8 0.300 0.136 500
7/8 x 1-3/8 22.2 x 34.9 0.260 0.118 500
CAE 90˚ 20 30 0.0312 0.79 1-1/2 x 1-1/2 38.1 x 38.1 10 3.05 0.330 0.149 500
2x2 50.8 x 50.8 0.450 0.204 500
3x3 76.2 x 76.2 0.680 0.308 500
1-1/2 x 1-1/2 38.1 x 38.1 0.370 0.167 500
CAEW 135˚ 20 30 0.0312 0.79 10 3.05
2x2 50.8 x 50.8 0.500 0.226 500
*Knurled and hemmed edge corner angle is available in limited geographical areas.
Dietrich04_042&043 3/22/04 3:22 PM Page 43
Interior (Drywall) Framing Products for Various Drywall Framing Assemblies
Economical hat-shaped framing 7/8 Furring
component used to “furr” out Channel
ceilings and masonry walls.
Furring Channel (FC-Series™) for Walls and Ceilings

■ Provides noncombustible furring for interior
and exterior walls.
■ Wide knurled face prevents screw “ride” and
facilitates easy installation.
■ Use to level uneven surfaces.
■ Available in 7/8” and 1-1/2” depths and
25, 20, 18 and 16 gauge.
1-1/2 Furring
■ Standard lengths are 10’ and 12’. Channel
Other lengths available.
Dietrich™ furring channel is a hat-shaped corrosion-resistant framing

component used to furr out masonry walls and ceiling assemblies. In
concrete wall applications, furring channel is installed vertically to the
wall surface using concrete nails or power-driven fasteners. Gypsum
panels are then screw-attached to the furring channels. In ceiling
applications, furring channels can be attached directly to the
underside of the building structure using tie wire, screws or power-
driven fasteners. Furring
channel is also used in
conjunction with U-Channel,
hanger wire and furring
channel clips to form
a rigid suspended ceiling
framework. Gypsum panels,
veneers or metal lath for
plaster finishes are attached
to the furring. Heavier-gauge
furring enables greater spans
and loading capacity. 18-
or 16-gauge furring is
commonly used for purlins
in exterior applications.
Furring Channel (FC-Series™), Walls and Ceilings

SSMA
FCN 087F125-18 25 18 0.0188 0.48 0.237 0.107 10 560
FCE 087F125-30 20 30 0.0312 0.79 0.388 0.176 10 420
7/8 22.2
FCM 087F125-43 18 43 0.0451 1.15 0.555 0.251 NA 250
FCM 087F125-54 16 54 0.0566 1.44 0.670 0.303 NA 250
FCND 150F125-18 25 18 0.0188 0.48 0.312 0.141 NA 500
FCED 150F125-30 20 30 0.0312 0.79 0.512 0.232 NA 500
1-1/2 38.1
FCMD 150F125-43 18 43 0.0451 1.15 0.733 0.332 NA 250
FCMD 150F125-54 16 54 0.0566 1.44 0.920 0.416 NA 250

43
Dietrich04_044&045 3/22/04 3:25 PM Page 44
Supporting and connecting wire used to support U-Channel

and furring channel gridwork for drywall, plaster and
veneer ceilings. Tie Wire
Tie Wire/Hanger Wire (HW Series/TW) & Furring Channel Clips (MFCC)
■ Tie wire is available in 18 gauge

and in lengths of 24”, 28” and 48”.
■ Hanger wire is available in 8, 9
and 12 gauge and lengths of 12’
■ Wire products conform to ASTM
C1063 and A641.
Dietrich™ hanger wire is available in 8-, 9- and 12-

gauge galvanized wire. The wire is suspended from the Hanger Wire
underside of the floor structure to provide a rigid
structural support for drop, gypsum wallboard or Tie Wire (TW18)
plaster suspended ceilings. DMF Length Weight/Box (Hank)
Product Gauge
Dietrich tie wire is 18-gauge galvanized soft annealed
™ Inches (mm) lbs. (kg)
Code
wire used in drywall and plaster construction. It’s used 24 610 25 11.31
to tie furring channels to U-Channels and is also used TW18 18 28 711 25 11.31
to tie metal lath to channels in plaster construction. 48 1219 50 22.62

Product Gauge Bundles/
ft. (m) lbs. (kg)
Code Skid
HWB8 8 12 3.66 50 22.62 20
HWB9 9 12 3.66 50 22.62 20
HW12 12 12 3.66 50 22.62 20
Quickly facilitates the attachment of metal furring

channel to 1-1/2" U-Channel in ceiling assemblies.
■ Securely fastens furring channel to U-Channel.
■ Corrosion-resistant galvanized wire. Available for
■ 500 pieces per box. Overnight
Dietrich™ metal furring channel clips are made of
Delivery!
galvanized wire and used to attach Dietrich™ metal
furring channels to 1-1/2" U-Channels in ceiling
gridwork. Clips must be installed on alternating sides of
the 1-1/2" channels. Use tie wire when clips cannot be
alternated.
Clips should only be used when single-layer gypsum or
single-layer veneer plaster base is used.
Furring Channel Clips (MFCC)

DMF Weight/box
Pcs./
Product box lbs. (kg)
Code
MFCC 500 20 9.05
Dietrich04_044&045 3/22/04 3:27 PM Page 45
Used to create a level,

plumb furring surface
on masonry walls.
Adjustable Wall Furring Bracket (FCWB)

■ Allows for 2” of adjustable furring variation
■ Easily corrects major variations in wall plane.
■ Eliminates the need for time consuming and
painstaking shimming
■ Pre-punched and corrugated for easy
attachment.
Dietrich™ adjustable wall furring bracket is used to provide

a uniform furring depth on masonry walls when you have
variation in the block. Manufactured from 20-gauge
corrugated galvanized steel, this product is designed to be
manipulated in the field to create the desired furring
depth. Used in combination with 3/4" or 1-1/2" cold-rolled
channel and tie wire, it provides the framework to affix
either metal furring channel or steel studs 24" O.C. in
braced furring systems.
Adjustable Wall Furring Brackets (FCWB)

Thickness Width Length Max Furr Out Weight/Carton
Product Pcs./
Code Gauge Mils Inches (mm) Inches (mm) Inches (mm) Inches (mm) lbs (kg) Carton
FCWB 20 30 0.0312 0.7925 1.0 25.4 3.0 76.2 2.0 50.8 29.0 13.1 500

45
Dietrich04_046&047 3/22/04 4:13 PM Page 46
One of the most efficient low-cost

methods of reducing sound
transmission in wood or
steel-framed partition
Resilient Channels (RC-Series™) for Walls and Ceilings
or ceiling assemblies.
■ Lab-Certified STC-rated up to 54.
RCUR
■ Single and double leg channels.
■ Knurled face to prevent screw ride.
■ RC Deluxe™ (RCSD) has extra-wide screw
surface for easy attachment.
■ Available in 12’ lengths.
Dietrich™ resilient channel is one of the most efficient
low-cost methods developed to reduce transmission of
airborne sound through partition and ceiling assemblies.
The resilient channel dampens sound waves effectively,
dissipating the energy and reducing sound transmission by
suspending gypsum wallboard 1/2" from the stud or joist.
Sound absorption can be maximized by utilizing sound
attenuation blankets within the wall or floor cavity.
RC Deluxe™
Resilient channel is manufactured from 25- and 20-gauge
corrosion-resistant galvanized steel and is available with
single or double legs. The single leg resilient channel is
available in regular (RCUR) and deluxe (RCSD/RCSE) sizes.
Dietrich™ high-performance single leg resilient channel
(RCUR) has a 1-1/4" screw flange. The RCUR is commonly
used in wall applications. Dietrich™ RC Deluxe™ resilient
channel (RCSD/RCSE) is the preferred resilient channel in
many applications because of its extra-wide 1-1/2" screw
flange. The extra-wide flange provides added rigidity and a
wider surface for faster and easier installation of sheathing
materials.
Dietrich™ double leg resilient channel (RCDN/RCDE) has
two legs for rapid installation. Double leg resilient
installation is typically used for ceiling applications with
multiple layers of gypsum board. Double leg resilient is Double Leg Resilient
easier to install, but offers a lower STC rating.
Resilient Channel (RC-Series™), Walls and Ceilings

RCUR 25 18 0.0188 0.48 1-1/4 31.8 12 3.66 0.160 0.072 20 1000
RCSD 25 18 0.0188 0.48 1-1/2 38.1 12 3.66 0.220 0.100 20 1000
RCSE 20 30 0.0312 0.79 1-1/2 38.1 12 3.66 0.310 0.140 20 1000
RCDN 25 18 0.0188 0.48 1-1/4 31.8 12 3.66 0.210 0.095 20 1000
RCDE 20 30 0.0312 0.79 1-1/4 31.8 12 3.66 0.400 0.181 20 1000
Dietrich04_046&047 3/22/04 4:16 PM Page 47
Resilient Channels (RC-Series™) for Walls and Ceilings

47
Dietrich04_048&049 3/22/04 3:32 PM Page 48
Easily accommodates rigid insulation

and provides for the attachment of
gypsum wallboard, veneer or plaster
to the interior of masonry walls.
Z-Furring (ZF-Series™)
■ 1-1/4” wide flange for easy screw attachment.

■ ”Toed in” leg to grip rigid insulation positively.
■ Available in 1”, 1-1/2”, 2”, 2-1/2” depths Z-Furring
and 10' standard length.
■ Custom sizes and
lengths available.
Dietrich™ Z-furring is used to furr out interior

masonry or poured concrete wall substrates and to
support rigid polystyrene, mineral, or fiberglass batt
insulation while providing a uniform plane for
gypsum panel attachment. Z-furring should be
installed vertically with the 3/4" flange against the
substrate. The type of fastener and spacing will vary
based on application. Gypsum wallboard may be
installed parallel or perpendicular to the Z-furring.
Metal lath should be installed perpendicular to the
Z-furring.
Z-Furring (ZF-Series™)
ZFN1 18 0.0188 0.48 1" 25.4 0.200 0.090 NA 500
ZFN2 18 0.0188 0.48 1-1/2" 38.1 0.240 0.109 NA 500
25
ZFN3 18 0.0188 0.48 2" 50.8 0.270 0.122 NA 500
(2.59,
ZFN4 18 0.0188 0.48 2-1/2" 63.5 8' 6", 0.300 0.136 NA 500
3.05,
ZFE1 30 0.0312 0.79 1" 25.4 10', 12' 0.310 0.140 NA 500
3.66)
ZFE2 30 0.0312 0.79 1-1/2" 38.1 0.360 0.163 NA 500
20
ZFE3 30 0.0312 0.79 2" 50.8 0.420 0.190 NA 500
ZFE4 30 0.0312 0.79 2-1/2" 63.5 0.480 0.217 NA 500
*Heavier gauges available on request
Dietrich04_048&049 3/22/04 3:34 PM Page 49
Added support where

shelves, cabinets, fixtures
or handrails are installed.
Backing Plate (BP)

■ Use as backer plates for attachment
of fixtures to metal stud walls.
Backing Plate
■ Available in 2”, 3”, 4”, 6”, 8”, 10” and 12”
widths and 25- and 20-gauge.
■ Standard length is 10’. Other lengths
and coil stock are available.
Dietrich™ backing plate is a

general multipurpose flat stock
that is used for backer plate to
support shelves, cabinets,
fixtures or handrails when
applied to metal framing.
Backing plate should not be
used as tension strapping or
cross bracing. Diagonal Tension
Strapping (DTN) should be used
in those applications.
Backing Plate (BP)

2 50.8 10 3.05 0.129 0.058 200
3 76.2 10 3.05 0.194 0.088 200
4 101.6 10 3.05 0.258 0.117 200
BPN 25 18 0.0188 0.48 6 152.4 10 3.05 0.387 0.175 200
8 203.2 10 3.05 0.516 0.234 200
10 254.0 10 3.05 0.645 0.292 200
12 304.8 10 3.05 0.774 0.350 200
2 50.8 10 3.05 0.214 0.097 200
3 76.2 10 3.05 0.321 0.145 200
4 101.6 10 3.05 0.428 0.194 200
BPE 20 30 0.0312 0.79 6 152.4 10 3.05 0.642 0.291 200
8 203.2 10 3.05 0.857 0.388 200
10 254.0 10 3.05 1.071 0.485 200
12 304.8 10 3.05 1.285 0.581 200

49
Dietrich04_050&051 3/22/04 3:36 PM Page 50
Heavy-duty flexible wood backing plate

provides superior screw pull-out strength.
Danback™ Wood Backing Plate
■ Used as backing plate for

the attachment of fixtures
in conjunction with
metal stud walls.
■ Available in 48”
sections, for either
16” or 24” O.C.
framing
■ Available with both
fire-rated and non-
fire-rated wood
blocking.
■ Meets all
specifications for
commercial and
residential
applications.
■ Reduces installation
time up to 80%.
Backing steel studs has always been a difficult, costly and The Danback™ wood backing plate provides extra screw pull-
time-consuming job. Danback** wood backing plate, a new out strength for heavy- duty backing applications to support
backing system for steel studs, has made the job easy and shelves, cabinets, fixtures or handrails for hospitals, clinics,
affordable. nursing homes, assisted living centers, institutional and
residential construction.
With the Danback™ wood backing plate, versatility doesn’t
mean you have to sacrifice strength! Meeting all light-gauge Patents Pending
framing specifications for both commercial and residential
applications, the patented hinge design actually flexes
around the stud and snaps in place for a perfect fit — every
time.
Danback™ Wood Backing Plate

DMF Width Length Weight/Pc Packaging
Product Inches (mm) Inches (mm) lbs (kg) Pcs/Skid
Code*∆
D16U 5-1/8 130 48 1219 5.00 2.26 250
D16F 5-1/8 130 48 1219 5.13 2.32 250
D24U 5-1/8 130 48 1219 5.00 2.26 250
D24F 5-1/8 130 48 1219 5.13 2.32 250
* U = untreated plywood. F = fire treated plywood.

**Danback is a trademark of Daniel W. Tollenaar.
∆ D16 = 16" O.C. spacing. D24 = 24" O.C. spacing.
Dietrich04_050&051 3/22/04 3:38 PM Page 51
Quick, efficient method to ladder frame

between parallel joists or trusses.
■ Precut for 16” and 24” O.C. spacing.
Katz Blocking (KA)

■ Coped and pre-punched flanges for easy installation.
■ Eliminates wood blocking and labor-intensive
notching of metal framing.
Katz
Dietrich™ Katz blocking is specifically

manufactured to ladder frame
between parallel framing members
and provide for the attachment of the
top of interior or nonstructural walls
when trusses or floor joists run
parallel to the walls. Katz blocks are
secured to the floor joists or roof
trusses with screws or nails.
Katz Blocking (KA)

DMF Size Length Weight/Piece
Product Inches (mm) Inches (mm) lbs. (kg)
Code
16 406 0.68 0.31
KA 3-5/8 92.1
24 610 1.16 0.52

Dietrich04_052-54 3/22/04 3:41 PM Page 52
Protects and isolates electrical wiring

and plumbing from contacting metal.
■ Snaps quickly into stud knockout. 2 Piece
Grommets (GROM)
Grommet
■ Prevents/eliminates pipe rattle.
■ Standard grommets fit all size studs
except 1-5/8” and 2-1/2”.
■ Use the Centipede™ grommet for 1-5/8”
and 2-1/2” wall framing.
■ Grommets are packaged 25 pieces per bag Centipede™
or in boxes of 500.
Grommets snap easily into stud knockouts and are used

to protect electrical wiring and plumbing lines from
contacting metal. Grommets are commonly used in
residential construction when metal conduit is not Available for
required by building code. Grommets are available in two Overnight
sizes. The Centipede™ grommet is used with 1-5/8" and
2-1/2" wall studs; the “standard” is used with all other sizes. Delivery!
For 1-5/8" and 2-1/2" studs For 3-1/2" and wider
Grommets (GROM)
DMF Size Pcs./ Pcs./
Product Inches Description
(mm) Bag Box
Code
3/4 19.1 3/4" for 1-5/8" and 2-1/2" studs 25 500
GROM
1-1/2 38.1 1-1/2" for 3-5/8" and wider studs 25 500
Dietrich04_052-54 3/22/04 3:43 PM Page 53
Custom fabricated bends, angles,

sizes, shapes and parts.
■ Deep legs, wide angles, odd shapes.
Custom Press Brake Shapes and Miscellaneous Angles (VD)

■ Available in 25 and 20 gauge.
■ Corrosion-resistant galvanized coating.
■ Manufactured specifically to your
drawings/specifications.
Dietrich Metal Framing provides extensive custom

press brake shapes for a full array of construction
applications. These custom products are
manufactured using precision brake-
forming equipment. A diverse
selection of specialized
sizes and shapes are
available. Simply
submit your
dimensioned
drawings to one of
our customer care
representatives.

53
Dietrich04_052-54 3/22/04 3:45 PM Page 54
The TradeReady® Header

positively impacted our
bottom line over
$5,600.00 on this project.
— JD File
Les File Drywall
Albuquerque, NM
I estimate that the time

required for framing
around doors and
windows has been
reduced by 1/3 or
more…these new headers
are one of the most
significant advancements
made in the framing
industry.
— Dean Theodorou
Taas Construction Corporation
Fort Lee, NJ
As architects, we specify
Sliptrack® systems
because it takes the
guesswork out of
designing for complicated
head-of-wall compliance
issues. Sliptrack® systems
provides fire-rated design
solutions in a variety of
conditions. And it’s
compliant with the latest
codes, with the ICBO and
UL paperwork to back
them up.
Photo courtesy of GQ Contracting
54 dietrich metalframing •com The place to stop…before the building starts!

Exterior Light-Gauge Steel Bar Guard Retaining Clip (SPBG) .... Slide Clip (SD2S)..............................75
Framing Systems for Curtain- ........................................................64-65 Slide Clip (SD) ..................................76
Wall/Axial-Load Bearing Long Leg Deflection Track QuickClip™ (QC-Series™) ..................77
C Studs (C Series™)....................58-59 (TS Series™) System with U-Channel Exterior Light-Gauge
Knockouts/Knockout Pattern ......60 (CHN), Clip Angles (U-Series™), Connections/Accessories
Track (TS Series™)..............................61 and Screws ..................................64-65 for Rigid Connections
Exterior Light-Gauge Double Track (Overtrack) Systems Uni-Clip™ (UCEC) ..............................78
Deflection Systems (OT-Series™)..................................66-67
EasyClip™ E-Series™
SLP-TRK® Slotted Track System Exterior Light-Gauge Support Clips ....................................79
(BDTK) ..........................................62-63 Load-Bearing Wall Headers
EasyClip™ S-Series™
Long Leg (Deflection) Track L-Header..............................................68 Support Clips ....................................80
(TS Series™) System with Spazzer® TradeReady® (TDHA/TDHB) Load- EasyClip™ U-Series™
Bridging Bar (SPZS) and Spazzer® Bearing Header ................................69 Support Clips ....................................81
C-Stud Headers (Available in EasyClip™ B-Series™
component pieces only)..........70-71 Support Clips ....................................82
Back-to-Back (C-Studs)
EasyClip™ X-Series™
(TS-Track) (S-Series Clips) ........70
Support Clips ....................................83
Boxed Header (C Studs)
EasyClip™ A-Series™
End Clips ............................................84
Capped Header (C-Studs)
Simpson™ Holdowns (HD Series)......85
Simpson™ Tension Ties (HT14) ..........85
Exterior Light-Gauge
Connections/Accessories Exterior Light-Gauge Framing
for Deflection/Slip Connections Accessories for Bridging and
Bracing
Fast Clip™ (FCSC) ..............................72
Spazzer® 5400 (SPZS) and
Fast Strut™ (FS12/FS15) ..................73 Spazzer® Bar Guard (SPBG)..........86
Fast Top® Clip (FTC3/FTC5) ..........74 U-Channel (CHN)
and EasyClip™ Clip Angles
(U-Series™) ..........................................87
U-Channel (CHN) and
Welding................................................88
Block (TSB) and Strap
(DT Series™) ........................................89
Diagonal Tension Strapping/
Shear Wall Bracing (DT)/
Gusset Plates (GP)
for Shear Wall Bracing..............90-91
Exterior Light-Gauge Framing
Accessories for Various Framing
Applications
Corner Angle (CAM)........................92
Heavy-Duty Furring Channel
(FCM) ..................................................93
Custom Shapes, and Miscellaneous
Angles (VS) ........................................94
55
Axial Load-Bearing and

EXTERIOR Curtain-Wall Framing
FRAMING Exterior light-gauge steel framing is used in a
variety of applications including axial load-bear-
OVERVIEW ing and curtain-wall construction.
Exterior Framing Overview
Exterior-light gauge framing is used in Axial load-bearing members are used in wall
a variety of construction applications and roof truss framing. They are designed to
including axial load-bearing walls, carry both lateral and axial loads. Axial framing
floors, roofs and curtain wall assem- members provide primary structural support
blies in low-rise, mid-rise, high-rise, and have been used as the primary framing system up to nine stories.
educational, institutional, multi-family
Curtain-wall framing members are used in exterior walls to provide an envelope or
and multi-use commercial and resi-
outside skin on the building. Light-gauge steel framing members provide exterior
dential structures. Light-gauge framing
envelope (curtain-wall) framing for a variety of construction and finishing systems. They
products can be assembled to provide
are ideal back-up support assemblies for brick-veneer, stucco and E.I.F.S. systems.
versatile, cost-effective, lightweight and
Dietrich™ curtain-wall framing members are utilized for in-fill, bypass (balloon) and span-
noncombustible assemblies used as pri-
drel framing applications. Dietrich’s wide variety of products allow engineers to select an
mary or secondary framing systems.
economical system to meet any design criteria, including high wind and seismic loads.
When used as the primary frame, steel
framing assemblies have been used up
to nine stories. When used as a second- Exterior Light-Gauge Steel
ary frame with heavy structural steel or Deflection Systems
concrete structures, light-gauge fram-
ing provides low-cost, efficient framing Deflection products and systems are used in both inte-
that can accommodate almost any fac- rior and exterior wall assemblies in areas that are sub-
ing material. Light-gauge steel framing jected to movement, including seismic disturbances.
is commonly stick framed; however, it is Deflection products allow for vertical movement, and
highly suited for prefabricated panel depending on the head-of-wall detail, can also provide
construction that provides additional for concomitant fire protection.
economy in today’s highly competitive A variety of deflection products can be used including:
construction industry.
Light-gauge steel framing is a superior ■ SLP-TRK* Slotted Track
building material. Its high strength-to- ■ Long-Leg Deflection Track with 5400 Spazzer® Bridging Bar
weight ratio maximizes building design ■ Long-Leg Track with U-Channel and EasyClip™ U-Series™ Clips
flexibility and provides rigid structural
■ Double-Track (Overtrack) System
integrity. Light-gauge steel framing is
easily insulated for high-energy conser-
vation and provides noncombustible Exterior Light-Gauge Load-Bearing Wall Headers
support for fire-rated construction. Load-bearing headers are structural components or assemblies that carry and redistribute
Dietrich Metal Framing offers the most
™ loads over door, window or other wall, floor or roof openings. Headers can be field assem-
comprehensive and widest selection of bled using conventional C-Stud and track members, or specialty headers like the L-Header
framing products, systems and services and TradeReady® Header can be custom-ordered to fit your specific framing conditions.
available in the industry. This wide The most common header configurations are:
selection of products, gauges, yield
strengths, sizes and flange widths ■ L-Header
enables the designer to obtain optimal ■ TradeReady® Load-Bearing Header
performance at economical costs. ■ Back to Back (I-Header)
■ Boxed Header
Consideration should be given to specialty headers as they substantially reduce labor
and materials. These products tend to be lighter in weight and most are easily insulat-
*SLP-TRK is a registered trademark ed after installation, unlike conventional C-Stud box headers that must be insulated
of Sliptrack Systems, Inc. during fabrication.
Overview
Exterior Exterior
Light-Gauge Light-Gauge
Connections/ Framing
Accessories for Accessories
Deflection/Slip for Bridging
Exterior Framing Overview

Connections and Bracing
Deflection or slip con- Bridging and bracing of
nections are designed to structural walls is required
permit movement of to provide resistance to
curtain-wall framing that results from thermal expansion and stud rotation and minor axis bending under wind and axial loads.
contraction, building movement or other forces. Dietrich Bridging and bracing of structural framing can be achieved
Metal Framing offers a variety of specialized clips to meet just through various methods.
about every deflection condition. This wide selection of clips
gives the designer the ability to attain optimal performance Some of the most common methods are:
at the most economical costs. ■ TradeReady® Spazzer® 5400 Bridging Bar
Dietrich Metal Framing provides one of the widest selections ■ U-Channel Attached with EasyClip™
of deflection and slip connections available. This exterior U-Series™ Clips
line provides a wide array of options to meet just about ■ U-Channel Welded to Framing Members
every deflection condition. Choose from the high-perform-
ance Fast Clip™ for typical deflection conditions, or choose a ■ Block and Strap
Fast Strut™ for standoff conditions. Dietrich Metal Framing provides a wide selection of bridging
and bracing products to meet just about every condition or
Many of the deflection clips feature Fast Clip™ technology.
preferred installation method. The Spazzer® 5400 bridging bar
These clips are embossed with fastening patterns to ensure
represents the latest in bridging technology. The Spazzer®
accurate placement of fasteners. Proprietary screws are also
bridging bar is manufactured with proprietary pre-punched
provided with each clip to ensure friction-free sliding.
slots that reduce installation costs and provides excellent tor-
If you are uncertain and would like assistance in selecting sional and lateral stud restraint.
the right clip for your deflection condition, contact our
technical service group at 800-873-2443. Exterior
Light-Gauge
Exterior
Framing
Light-Gauge
Accessories for
Connections/
Miscellaneous
Accessories
Framing
for Rigid
Applications
Connections
Dietrich Metal Framing
Rigid connection clips
offers a variety of heavy-gauge framing components for vari-
and supports are used
ous load-bearing or structural framing conditions. These
in a variety of ways to
products include heavy-duty corner angles, furring channels
secure light-gauge framing members to each other or to the
and a wide assortment of custom- fabricated shapes and
building structure. Some of the more common rigid con-
components.
nections include joist connections, curtain-wall connections,
opening connections, beam/wall connections, bridging con- Utilizing state-of-the art manufacturing equipment, Dietrich
nections and header connections. can fabricate a large array of shapes, clips, bends, angles,
Dietrich Metal Framing provides one of the widest selections long-leg tracks and miscellaneous closures.
of rigid connection clips available. This extensive line pro-
vides a wide array of options to meet most rigid connection
applications. Choose from our wide variety of support and
attachment clips, specialty hold downs and tension ties.
Most of these support and specialty clips are prepunched for
fast and accurate fastener placement.
Dietrich04_058&059 3/22/04 11:24 AM Page 58
Light-gauge C-shaped framing members for

axial load-bearing walls, curtain-walls,
tall interior partitions, floor joists
and roof truss assemblies.
C-Studs (C-Series™)
■ Size (Web): 2-1/2”, 3-1/2”, 3-5/8”, 4”, 5-1/2”, 6”,

8”, 10”, 12”, 14”.
■ Flange Sizes: 1-1/4”, 1-3/8”, 1-5/8”, 2”, 2-1/2”, 3”.
■ Gauges: 20 (33 mils), 18 (43 mils),
16 (54 mils), 14 (68 mils) and 12 (97 mils).
C-Stud
■ 33 and 50 KSI yield strengths. 33 KSI is
standard. 50 KSI must be specified at
time of order.
■ G-60 Galvanized coating or equivalent.
■ Custom sizes, lengths and coatings available.
Dietrich™ C Studs are light- Dietrich™ CSJ™ studs/joist have a 1-5/8" flange and a 1/2"
weight, cold-formed galvanized return and are considered the industry standard. CSJ
steel members used in axial load- members are the most widely used and specified framing
bearing walls, curtain-walls, floor members. They provide the vertical strength necessary
joists and roof truss framing. for demanding load-bearing structural applications
C-Studs are available in a wide and sufficient strength for many joist applications.
array of sizes, flanges, gauges and Dietrich™ CSW™ wide studs/joist have a 2" wide flange
yield strengths to obtain optimal and a 5/8" return that provides a larger bearing surface for
performance at minimal costs. attaching sub-flooring or sheathing materials. This framing
One of the key differences member is also used in axial load-bearing wall assemblies.
between the various Dietrich™ CSE™ extra-wide studs/joist have a 2-1/2" wide
C-Stud/ Joist framing members flange and a 5/8" return and are used in floor joist
is the flange and return assemblies and heavy loading conditions.
dimensions. The flange is
typically the bearing surface for Dietrich™ CSS™ super-wide studs/joist have a 3" flange
cladding materials and a key and a 1" return and are used in very heavy loading and
contributor to the load-bearing long spanning conditions.
capacity of the member. Flange sizes include
1-1/4", 1-3/8", 1-5/8", 2", 2-1/2" and 3".
Dietrich™ CWI™ light-duty curtain-wall
studs have a 1-1/4" flange and 1/4" return
and are used to support the exterior skin
in ultra-light applications. CWI studs are
available only in the Pacific Northwest.
Dietrich™ CWN™ curtain-wall studs have a
1-3/8" flange and 1/2" return and are used
to support the exterior skin or cladding
material (metal, stone, tile, glass, etc.)
and the wind loads to which they are
subjected.
Dietrich04_058&059 3/22/04 11:26 AM Page 59
Exterior Light-Gauge Steel Framing Systems for Curtain-Wall/Axial Load-Bearing
NOTE: This catalog does not provide load data (load capacities, limiting heights,
physical and structural properties and span data) necessary for building design. Consult
the Dietrich™ Technical Design Guide. Additional assistance is available at
www.dietrichmetalframing.com or by calling Dietrich Design Group at 1-800-873-2443.
C-Studs (C-Series™)
C-Studs
DMF Thickness Depth Flange Return
SSMA
Product Reference Gauge (mils) Inches (mm) Inches (mm) Inches (mm)
Code*
250S125-x 2-1/2 63.5 1-1/4 31.8 1/4 6.4
362S125-x 3-5/8 92.1 1-1/4 31.8 1/4 6.4
CWI (3) 20 (33), 18 (43), 16 (54), 14 (68)
600S125-x 6 152.4 1-1/4 31.8 1/4 6.4
800S125-x 8 203.2 1-1/4 31.8 1/4 6.4
250S137-x 2-1/2 63.5 1-3/8 34.9 3/8 9.5
362S137-x 3-5/8 92.1 1-3/8 34.9 3/8 9.5
CWN (3) 400S137-x 20 (33), 18 (43), 16 (54), 14 (68) 4 101.6 1-3/8 34.9 3/8 9.5
600S137-x 6 152.4 1-3/8 34.9 3/8 9.5
800S137-x 8 203.2 1-3/8 34.9 3/8 9.5
250S162-x 2-1/2 63.5 1-5/8 41.3 1/2 12.7
350S162-x 3-1/2 88.9 1-5/8 41.3 1/2 12.7
362S162-x 3-5/8 92.1 1-5/8 41.3 1/2 12.7
400S162-x 4 101.6 1-5/8 41.3 1/2 12.7
550S162-x 5-1/2 149.7 1-5/8 41.3 1/2 12.7
CSJ (3, 5) 20 (33), 18 (43), 16 (54), 14(68), 12 (97)
600S162-x 6 152.4 1-5/8 41.3 1/2 12.7
800S162-x 8 203.2 1-5/8 41.3 1/2 12.7
1000S162-x 10 254.0 1-5/8 41.3 1/2 12.7
1200S162-x 12 304.8 1-5/8 41.3 1/2 12.7
1400S162-x 14 355.6 1-5/8 41.3 1/2 12.7
362S200-x 3-5/8 92.1 2 50.8 5/8 15.9
400S200-x 4 101.6 2 50.8 5/8 15.9
600S200-x 6 152.4 2 50.8 5/8 15.9
CSW (3, 5) 800S200-x 20 (33), 18 (43), 16 (54), 14(68), 12 (97) 8 203.2 2 50.8 5/8 15.9
1000S200-x 10 254.0 2 50.8 5/8 15.9
1200S200-x 12 304.8 2 50.8 5/8 15.9
1400S200-x 14 355.6 2 50.8 5/8 15.9
362S250-x 3-5/8 92.1 2-1/2 63.5 5/8 15.9
400S250-x 4 101.6 2-1/2 63.5 5/8 15.9
600S250-x 6 152.4 2-1/2 63.5 5/8 15.9
CSE (3, 5) 800S250-x 20 (33), 18 (43), 16 (54), 14(68), 12 (97) 8 203.2 2-1/2 63.5 5/8 15.9
1000S250-x 10 254.0 2-1/2 63.5 5/8 15.9
1200S250-x 12 304.8 2-1/2 63.5 5/8 15.9
1400S250-x 14 355.6 2-1/2 63.5 5/8 15.9
600S300-x 6 152.4 3 76.2 1 25.4
800S300-x 8 203.2 3 76.2 1 25.4
CSS (3, 5) 1000S300-x 18 (43), 16 (54), 14(68), 12 (97) 10 254.0 3 76.2 1 25.4
1200S300-x 12 304.8 3 76.2 1 25.4
1400S300-x 14 355.6 3 76.2 1 25.4
*3 or 5 indicates ksi. 33 ksi is standard. 50 ksi must be specified at time of order.
*CWI (3) available in limited geographical areas
X= mil thickness identifier

59
Dietrich04_060&061 3/22/04 11:30 AM Page 60
Conveniently placed holes

for easy installation of wiring,
plumbing and bridging. Varies
Knockouts/Knockout Pattern
■ Pre-punched at regular intervals. Varies

■ Easily accommodates Spazzer® or U-Channel bridging.
■ Custom hole placement available on request.
Dietrich™ light-gauge C-studs for axial

load-bearing and curtain-wall framing are 2'
prepunched with knockouts at regular
intervals. These punchouts are specifically
designed to allow for rapid installation of
pipes, electrical conduit and wall bridging.
2'
Standard knockout sizing is 1-1/2" x 4"
in members 3-1/2" and wider. Members
smaller than 3-1/2" are unpunched unless
otherwise specified at time of order. If
specified, members will be punched with 2'
a 3/4" x 4" knockout.
Knockouts are punched 12" from the lead
2-1/2" wide 3-1/2" and
edge with additional knockouts every 24" studs wider
O.C. (on the West
Coast the first 2'
knockout is punched
24" from the lead
edge). Caution must
be exercised when 2'
installing studs so
knockouts align for
bridging. Based on
stud length, the
distance the knockout 2'
falls from the tail end
of the stud may not be
the same from the lead
end. To align punch- 2'
outs, make sure to use
the same end in the
same direction
consistently.
2'
1'
West Coast East and

Punch Pattern Central
Punch
Patttern
Dietrich04_060&061 3/22/04 11:33 AM Page 61
Exterior Light-Gauge Steel Framing Systems for Curtain-Wall/Axial-Load Bearing
U-shaped channel runners used

as the top and bottom tracks to secure
wall studs or end support closures
for floor joist framing.
Track (TS-Series™)
■ Sizes (Web): 2-1/2”, 3-1/2”, 3-5/8” 4”, 5-1/2”,
6”, 8”, 10”, 12”, 14”.
■ Leg heights: 1”, 1-1/4”, 1-1/2”, 2” and 3” legs. Track
■ Gauges: 20 (33 mils), 18 (43 mils),
16 (54 mils), 14 (68 mils) and 12 (97 mils).
■ 33 KSI yield strength. 50 KSI available
on request.
■ G-60 Galvanized coating or equivalent.
■ Standard 10’ lengths.
■ Custom sizes, lengths and coatings available.
Dietrich™ structural track is a Track

U-shaped framing component DMF SSMA Thickness Leg Height
used as top and bottom runners Product Reference Gauge (mils) Inches (mm)
Code
to secure wall studs. Dietrich™
20 (33), 18 (43), 16 (54),
structural track is produced to TSA x-T100-y 1 25.4
14 (68), 12 (97)
ASTM C955 standards. Structural
20 (33), 18 (43), 16 (54),
track is also used as end support TSB x-T125-y 1-1/4 31.8
14 (68), 12 (97)
closures for joists at exterior or
20 (33), 18 (43), 16 (54),
foundation walls, head and sill TSF x-T150-y 1-1/2 38.1
14 (68), 12 (97)
plates of wall openings and solid
20 (33), 18 (43), 16 (54),
blocking. Track is normally TSC x-T200-y 2 50.8
14 (68), 12 (97)
ordered in corresponding size
20 (33), 18 (43), 16 (54),
and gauge to the wall studs. TSE x-T300-y 3 76.2
14 (68), 12 (97)
Longer leg track is used for
20 (33), 18 (43), 16 (54),
deflection conditions or to OTSF z-T150-y 1-1/2 38.1
14 (68), 12 (97)
accommodate uneven or
20 (33), 18 (43), 16 (54),
inconsistent floor or ceiling OTSC z-T200-y 2 50.8
14 (68), 12 (97)
conditions. Slip track for track-
20 (33), 18 (43), 16 (54),
over-track assemblies is also OTSE z-T300-y 3 76.2
14 (68), 12 (97)
available.
x = Part depth. Tracks are available to match all stud and joist depths.
y = mil thickness of steel.
z = Part depth. Overtracks are available in all standard stud depths. The track width
is sized to fit over a standard TS series track.

Dietrich04_062&063 3/22/04 11:36 AM Page 62

■ Positive attachment that allows up to 1” of vertical movement.
SLP-TRK® Slotted Track System (BDTK)
■ UL*** approved 1- and 2-hour systems.

■ Meets IBC, BOCA, SBCCI, ASTM, UL2079,
■ Single track assembly.
SLP-TRK®
The SLP-TRK® slotted track has achieved the following

building code approvals:
ICBO – ER 5344
UL Classified R19236
UL Certified for Canada XHL17
LA City RR25344
OSHPD R#0371
NY City MEA 285-01-M
It’s a real challenge these days meeting head-of-wall codes
for fire stop and life safety issues while maintaining the SLP-TRK® slotted track is installed directly to the slab or
ability to absorb vertical movement in low-, mid- and high- corrugated metal roof deck using #10 sheet metal screws,
rise buildings. SLP-TRK* slotted track is the solution. Tapcon** concrete screws or power-driven fasteners.
Fasteners must be placed at 8" or 12" intervals depending
SLP-TRK® slotted track provides a positive attachment for on the flute intervals of the metal decking material. Studs
overall strength and allows for vertical movement caused must be cut 3/4" shorter than floor-to-ceiling height to
by normal head-of-wall and floor extension or allow for ceiling deflection. Studs are attached to the track
compression. SLP-TRK® slotted track smoothly integrates through the midpoint of flange slots using #8 self-tapping
with a variety of wall installation systems and is extremely wafer-head screws on each side of the stud.
user-friendly as well as economical. The simple design and
easy installation reduces the cost of materials and labor. U.S. Patent No. 5,127,760
And the installer can use the head-of-wall systems he
prefers to work with.
SLP-TRK® slotted track systems comply with the toughest
code requirements in the country, if not the world. It has
been tested with a variety of leading fire-stop products and
has outperformed the requirements of stringent fire and
hose stream testing of ASTM E-119 and ASTM E814. SLP-
TRK has also met and exceeded the latest seismic cycling
standards found in UL2079 and ASTM1966.
*SLP-TRK is a registered trademark of SlipTrack Systems, Inc.;

**Tapcon is a registered trademark of Illinois Tool Works Inc.;
***UL and UL Classified are trademarks of Underwriters Laboratories, Inc.
Dietrich04_062&063 3/22/04 11:38 AM Page 63
Exterior Light-Gauge Steel Deflection Systems
SLP-TRK® Slotted Track System (BDTK)

U.S. Patent No. 5,127,760
SLP-TRK** (BDTK)
2-1/2 63.5 0.484 0.219 112
3-5/8 92.1 0.556 0.252 100
BDTK 25 18 0.0188 0.48 4 101.6 0.580 0.262 90
6 152.4 0.708 0.320 60
8 203.2 0.836 0.378 50
2-1/2 63.5 0.882 0.399 112
3-5/8 92.1 1.015 0.459 100
BDTK 20 33 0.0346 0.88 4 101.6 1.059 0.479 90
6 152.4 1.294 0.586 60
8 203.2 1.529 0.692 50
2-1/2 63.5 1.150 0.520 112
3-5/8 92.1 1.323 0.599 100
BDTK 18 43 0.0451 1.14 4 101.6 1.380 0.624 N/A 90
6 152.4 1.687 0.763 60
8 203.2 1.993 0.902 50
2-1/2 63.5 1.443 0.653 112
3-5/8 92.1 1.660 0.751 100
BDTK 16 54 0.0566 1.44 4 101.6 1.732 0.784 90
6 152.4 2.117 0.958 60
8 203.2 2.502 1.132 50
2-1/2 63.5 1.818 0.823 112
3-5/8 92.1 2.091 0.946 100
BDTK 14 68 0.0713 1.81 4 101.6 2.182 0.987 90
6 152.4 2.667 1.207 60
8 203.2 3.152 1.426 50
*Custom sizes are available on request.
**SLP-TRK is a registered trademark of SlipTrack Systems, Inc.

63
Dietrich04_064&065 3/22/04 11:41 AM Page 64
TS-Series™ System with Spazzer® Bridging Bar (SPZS) and Spazzer® Bar Guard™ Retaining Clip (SPBG)
Enhance productivity and reduce materials with the Spazzer® 5400‚
prenotched, prespaced exterior deflection assembly.
■ Eliminates high material cost of custom-made head tracks.
Long Leg Deflection Track (TS-Series™)
■ Requires only a single generic Deep Leg track to provide deflection.

■ Facilitates sprayable Intumescent/Elastomeric firestops.
■ Automatically positions and holds studs rigidly on 12”, 16” or 24” spacing.
The TradeReady® Spazzer® Spazzer® 5400 bridging bar assembles

5400 prenotched, 16-gauge, steel studs into a rigid, accurate
galvanized steel spacer and gridwork that allows for deflection
bridging bar is engineered to and provides excellent resistance Spazzer®
facilitate the rapid erection of to stud rotation and displacement 5400
exterior deflection wall framing. without the use of mechanical
Before the Spazzer® 5400 attachments and welding
Bridging Bar, deflection at the equipment. The Spazzer® Spazzer®
head track was addressed with Bar Guard™ retaining clip, or screws Bar Guard™
a variety of systems including must be installed in curtain-wall
double track, proprietary and axial load-bearing wall
tracks, deep leg track with cold rolled channel, clip angles or applications to prevent the
welds, solid blocks and metal strap across the face of the studs Spazzer® 5400 bridging bar from
or by fastening the studs to the top track and removing the accidentally being disengaged.
screws prior to installing the wall sheathing. U.S. Patent No. 6, 708, 60 and
The prenotched slots and gripping power of the 50-inch other Patents Pending
TS-Series™ System with U-Channel (CHN), EasyClip™ (U-Series™) Clip Angles and Screws
Traditional, single-track
deflection assembly for
curtain-wall framing.
Screw
■ Nonproprietary system.
■ Traditional framing components.
Deep Leg
■ Requires U-Channel and clip angles.
Track
EasyClip™ U-Series™
U-Channel Clip Angle
This traditional assembly accommodates the deflection of floor beams or floor decks
at the head of wall. The single-deep leg track assembly requires 1-1/2" cold-rolled
channel (CHN) and 1-1/2" x 1-1/2" 16-gauge (EasyClip™ U-Series™) clip angles installed
continuously throughout the uppermost punch-outs to align the studs vertically
within the plane of the wall. Deflection track details must be designed for the specific
conditions of a building to accommodate the required deflection and end reactions of
the studs. Deflection tracks cannot be used in axial load-bearing stud conditions or
above continuous window spandrels.
Dietrich04_064&065 3/22/04 11:44 AM Page 65
Long Leg (Deflection) Track (TS Series™)

SSMA
362T200-33 3-5/8 92.1 0.863 0.391 NA 220
TSC 20 33 0.0346 0.88
600T200-33 6 152.4 1.132 0.513 NA 120
Long Leg (Deflection) Track (TS Series™)

362T200-43 3-5/8 92.1 1.122 0.509 NA 220
TSC 18 43 0.0451 1.15
600T200-43 6 152.4 1.473 0.668 NA 120
362T200-54 3-5/8 92.1 1.410 0.640 NA 220
TSC 16 54 0.0566 1.44
600T200-54 6 152.4 1.851 0.840 NA 120
362T200-68 3-5/8 92.1 1.774 0.805 NA 220
TSC 14 68 0.0713 1.81
600T200-68 6 152.4 2.328 1.056 NA 120
362T200-97 3-5/8 92.1 2.528 1.147 NA 220
TSC 12 97 0.1017 2.58
600T200-97 6 152.4 3.318 1.505 NA 120
362T300-33 3-5/8 92.1 1.090 0.494 NA 154
TSE 20 33 0.0346 0.88
600T300-33 6 152.4 1.359 0.616 NA 84
362T300-43 3-5/8 92.1 1.417 0.643 NA 154
TSE 18 43 0.0451 1.15
600T300-43 6 152.4 1.767 0.801 NA 84
362T300-54 3-5/8 92.1 1.781 0.808 NA 154
TSE 16 54 0.0566 1.44
600T300-54 6 152.4 2.221 1.007 NA 84
362T300-68 3-5/8 92.1 2.240 1.016 NA 154
TSE 14 68 0.0713 1.81
600T300-68 6 152.4 2.794 1.267 NA 84
362T300-97 3-5/8 92.1 3.193 1.448 NA 154
TSE 12 97 0.1017 2.58
600T300-97 6 152.4 3.984 1.807 NA 84
Spazzer® 5400 Bar (SPZS) U.S. Patent No. 6, 708, 460 and other Patents Pending
SSMA
1-1/4 x 31.8 x 31.8
SPZS NA 16 54 0.0566 1.44 2.06 0.93 NA 680
1-1/4 x 50 x 1270
Spazzer® Bar Guard™ Retaining Clip (SPBG)

DMF Size Weight/Piece Packaging
SSMA
Product Pcs./
Reference Inches (mm) lbs. (kg)
Code Box
SPBG NA 3-1/4" x 1-5/8" 82.5 x 41.3 0.05 0.02 100
U-Channel (CHN)
SSMA
CHN2 150U50-54 16 54 0.0566 1.44 1-1/2 38.1 0.290 0.131 10 330

SSMA
U543 NA 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 3-3/8 38.1 x 38.1 x 85.7 0.16 0.07 400
U545 NA 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 5-3/4 38.1 x 38.1 x 146 0.28 0.13 200
U547 NA 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 7-3/4 38.1 x 38.1 x 197 0.37 0.17 100

65
Dietrich04_066&067 3/22/04 11:49 AM Page 66
Traditional, Double Track or

track-over-track curtain-wall
deflection system.
Double Track (Overtrack) Systems (OT-Series™)
Overtrack
■ Eliminates bridging.
■ Requires custom top track/longer lead times.
A Double Track system is a two-piece assembly that

accommodates deflection of exterior curtain walls. A
custom-made deep leg outer track is installed to the Deep Leg Track
underside of the floor deck. A wall assembly is constructed
on the floor and slid into place. The wall assembly is built
to allow a “gap” at the top for deflection.
The track-over-track assembly, although still used, is
becoming less and less common. The development of
innovative deflection systems like the SLP-TRK* System
(page 62) has significantly improved and streamlined
the assembly process. Double track deflection assemblies
cannot be used in axial load-bearing stud conditions or
above continuous window spandrels.
Dietrich04_066&067 3/22/04 11:51 AM Page 67
Double Track (Overtrack) System (OT-Series™/TR-Series™)

SSMA
375T200-33 3-3/4 95.3 0.871 0.395 NA 220
OTSC 20 33 0.0346 0.88
612T200-33 6-1/8 155.6 1.140 0.517 NA 120
Double Track (Overtrack) Systems (OT-Series™)

375T200-43 3-3/4 95.3 1.131 0.513 NA 220
OTSC 18 43 0.0451 1.15
612T200-43 6-1/8 155.6 1.481 0.672 NA 120
387T200-54 3-7/8 98.4 1.441 0.654 NA 220
OTSC 16 54 0.0566 1.44
625T200-54 6-1/4 158.8 1.881 0.853 NA 120
387T200-68 3-7/8 98.4 1.808 0.820 NA 220
OTSC 14 68 0.0713 1.81
625T200-68 6-1/4 158.8 2.361 1.071 NA 120
387T200-97 3-7/8 98.4 2.570 1.166 NA 220
OTSC 12 97 0.1017 2.58
625T200-97 6-1/4 158.8 3.360 1.524 NA 120
375T300-33 3-3/4 95.3 1.098 0.498 NA 154
OTSE 20 33 0.0346 0.88
612T300-33 6-1/8 155.6 1.367 0.620 NA 84
375T300-43 3-3/4 95.3 1.425 0.646 NA 154
OTSE 18 43 0.0451 1.15
612T300-43 6-1/8 155.6 1.775 0.805 NA 84
387T300-54 3-7/8 98.4 1.811 0.821 NA 154
OTSE 16 54 0.0566 1.44
625T300-54 6-1/4 158.8 2.251 1.021 NA 84
387T300-68 3-7/8 98.4 2.272 1.031 NA 154
OTSE 14 68 0.0713 1.81
625T300-68 6-1/4 158.8 2.826 1.282 NA 84
387T300-97 3-7/8 98.4 3.232 1.466 NA 154
OTSE 12 97 0.1017 2.58
625T300-97 6-1/4 158.8 4.022 1.824 NA 84
C=2" Legs
E=3" Legs

SSMA
362T200-33 3-5/8 92.1 0.863 0.391 NA 220
TSC 20 33 0.0346 0.88
600T200-33 6 152.4 1.132 0.513 NA 120
362T200-43 3-5/8 92.1 1.122 0.509 NA 220
TSC 18 43 0.0451 1.15
600T200-43 6 152.4 1.473 0.668 NA 120
362T200-54 3-5/8 92.1 1.410 0.640 NA 220
TSC 16 54 0.0566 1.44
600T200-54 6 152.4 1.851 0.840 NA 120
362T200-68 3-5/8 92.1 1.774 0.805 NA 220
TSC 14 68 0.0713 1.81
600T200-68 6 152.4 2.328 1.056 NA 120
362T200-97 3-5/8 92.1 2.528 1.147 NA 220
TSC 12 97 0.1017 2.58
600T200-97 6 152.4 3.318 1.505 NA 120
362T300-33 3-5/8 92.1 1.090 0.494 NA 154
TSE 20 33 0.0346 0.88
600T300-33 6 152.4 1.359 0.616 NA 84
362T300-43 3-5/8 92.1 1.417 0.643 NA 154
TSE 18 43 0.0451 1.15
600T300-43 6 152.4 1.767 0.801 NA 84
362T300-54 3-5/8 92.1 1.781 0.808 NA 154
TSE 16 54 0.0566 1.44
600T300-54 6 152.4 2.221 1.007 NA 84
362T300-68 3-5/8 92.1 2.240 1.016 NA 154
TSE 14 68 0.0713 1.81
600T300-68 6 152.4 2.794 1.267 NA 84
362T300-97 3-5/8 92.1 3.193 1.448 NA 154
TSE 12 97 0.1017 2.58
600T300-97 6 152.4 3.984 1.807 NA 84
C=2" Legs
E=3" Legs

67
Dietrich04_068&069 3/22/04 12:04 PM Page 68
Preformed L-header that

slides into place quickly.
■ Substantial labor savings.
L-Header
■ Lightweight and easy to handle.

■ Available in stock and custom lengths.
Dietrich™ L-Headers are prefabricated light-gauge 90˚ L-sections

that are used in load-bearing wall framing. L-headers slide easily
into place and eliminate the labor-intensive process of built-up
field-assembled headers. L-headers may not work in all loading
situations. Proper loading comparisons should be examined, L-Header
especially when considering up-lift loads. L-headers may be
installed as single, one header one side, or double, two headers,
one on both sides.
L-Header
DMF Leg Length Thickness Weight/ft.
Inches (mm) Gauge Mils lbs. (kg)
Code Inches (mm)
1-1/2 x 6 38.1 x 152 18 43 0.0451 1.15 1.161 0.525
1-1/2 x 6 38.1 x 152 16 54 0.0566 1.44 1.457 0.659
1-1/2 x 6 38.1 x 152 14 68 0.0713 1.81 1.835 0.830
1-1/2 x 8 38.1 x 203 18 43 0.0451 1.15 1.470 0.665
LHDR 1-1/2 x 8 38.1 x 203 16 54 0.0566 1.44 1.845 0.835
1-1/2 x 8 38.1 x 203 14 68 0.0713 1.81 2.325 1.052
1-1/2 x 10 38.1 x 254 18 43 0.0451 1.15 1.780 0.805
1-1/2 x 10 38.1 x 254 16 54 0.0566 1.44 2.234 1.011
1-1/2 x 10 38.1 x 254 14 68 0.0713 1.81 2.814 1.273
68 request a quote online @ dietrich metalframing •com The place to stop…before the building starts!
Dietrich04_068&069 3/22/04 12:08 PM Page 69
Exterior Light-Gauge Load-Bearing Wall Headers
Preformed U-shaped header

that slides easily over wall
assembly and provides
maximum carrying capacity.
TradeReady® (TDHA/TDHB) Load-Bearing Header

■ Huge labor savings.
■ Easy and fast installation.
■ Pre-engineered for most door or window openings.
■ Easily insulates after installation.
The TradeReady® load-bearing one-piece header drastically reduces
labor costs when compared to standard box beam headers TradeReady® Header
constructed with C-shaped members. TradeReady® headers are pre-
engineered to fit standard door and window openings. Just slip the
TradeReady® header over the top track, screw to the jamb studs and
your header is complete. These headers have great load-distribution
qualities and enable access for insulation after the framing is
completed.
U.S. Patent No. 5,689,922 and other foreign patents.
TradeReady® Header
DMF Wall Leg Thickness Weight/ft.
Product Stud Size Length Design Thickness
Gauge Mils lbs. (kg)
Code Inches (mm) Inches (mm) Inches (mm)
3-5/8 92.1 8 203 4.802 2.173
TDHA 14 68 0.0713 1.811
6 152.4 8 203 5.383 2.436
3-5/8 92.1 12 305 6.760 3.059
TDHB 14 68 0.0713 1.811
6 152.4 12 305 7.341 3.322
Standard lengths are 82" and 108".
For more information or to contact a sales representative, see page 3

69
Dietrich04_070&071 3/22/04 12:12 PM Page 70
Traditional, field-fabricated,
built-up back-to-back
C-Stud Header used to
distribute loads above door
Back-to-Back (C-Studs) (TS-Track) (S-Series™ Clips)
and window openings.

■ Assembled using traditional C-Stud and track
members
I-Header
■ I-Shape permits easy installation of web stiffeners
when required.
■ Can be insulated after installation.
Back-to-back or
I-beam headers,
consist of two “C”
sections with the webs
screwed back to back.
The header takes the
shape of an I. Headers
are attached to the
jamb stud with
EasyClip™ S-Series
support clips. Jack
studs are usually used
to provide additional
support. Many
contractors prefer this
method of building headers because they can be insulated
after assembly. This type of header is sold as components
and must be field fabricated. When C-studs are used in
header applications, they should be ordered as unpunched.
Dietrich04_070&071 3/22/04 12:16 PM Page 71
Exterior Light-Gauge Load-Bearing Wall Headers
Traditional field-fabricated
built-up box beam header
used to distribute loads
above door and window
Boxed Header (C-Studs) (TS-Track) (S-Series™ Clips)

openings.
■ Field assembled using traditional C-Stud Boxed Header
and track members.
■ Labor intensive assembly.
■ Must be insulated prior to installation
■ Provides surface for sheathing attachment.
Box beam headers are field or shop assembled by
positioning two C-stud sections with the open side of the
webs or “C”s facing each other. The “C”s are capped with a
top and bottom track and positioned over
the door or window opening. In most
cases, the connection at the jamb
is made by nesting the boxed
header into a track. Usually
jack studs are used
to add additional
header support. Box
beam headers must
be insulated at time
of fabrication. This
type of header is sold as
components and must
be field fabricated.
When C-studs are used
in header applications,
they should be ordered
as unpunched.

Dietrich04_072&073 3/22/04 12:22 PM Page 72
Provides the fastest and

easiest attachment for
curtain-wall framing.
Fast Clip™ (FCSC)
■ Vertical movement up to 3”
(1-1/2” up and down).
■ Rapid, one-piece installation.
■ Proprietary screws provide frictionless
slip connection.
■ Stiffened corners result in superior
design values. Fast Clip™
■ Embossed fastening patterns
to ensure accurate
placement of fasteners.
■ 14-gauge, G-90,
50 KSI steel.
Dietrich™ Fast Clip™ deflection

clips are used to attach exterior
curtain-wall studs to the building
structure and provide for vertical
building movement independent
of the cold-formed steel framing. Proprietary
Screw
A Dietrich™ Fast Clip™ deflection
clip installs quickly with welds,
screws or powder-actuated
fasteners and provides adjustable
standoff to ensure a plumb wall
plane. Proprietary screws are
provided with each clip to ensure
friction-free sliding. Each clip is
also embossed with fastening
patterns to ensure accurate
Available for
Overnight
Delivery!
Fast Clip™ Deflection Clips

DMF Thickness Size Weight/Piece Packaging*
Code Inches (mm) Box
1-1/2 x 3-1/2 38.1 x 88.9
FCSC 14 68 0.0713 1.81 0.550 0.249 25
x 4-1/2 x 114.5
*Includes 55 proprietary shoulder screws per box.
Dietrich04_072&073 3/22/04 12:28 PM Page 73
Exterior Light-Gauge Connections/Accessories for Deflection/Slip Connections
Superior curtain-wall
fastener that allows up to
a 7-1/2" standoff.
Fast Strut™ (FS12/FS15)

■ Use for all wide standoff conditions.
Fast Strut™ 12
■ Fast, one-piece universal installation.
■ Proprietary screws provide frictionless
slip connections.
■ Vertical movement up to 2-1/2”
(1-1/4” up and down).
■ Embossed fastening pattern to ensure
accurate placement of fasteners.
■ 14-gauge, G-90, 50 KSI steel. Fast Strut™ 15
The Dietrich™ Fast Strut™ curtain-wall connector employs similar Fast Clip™
technology for curtain-wall stud attachment and is commonly used when wide
stand-off conditions exist. Fast Strut™ products are available in standard lengths
of 12-1/4" and 15-1/4" and custom lengths of up to 24" long to allow framing
attachment well beyond the perimeter of the structural steel. Struts are attached
to the underside of structural members with screws, welds, or powder-actuated
fasteners. Studs are plumbed and secured with propriety screws for friction-free
deflection. Each clip is also embossed with fastening patterns to ensure accurate
Patent pending.
Proprietary
Screw
Available for
Overnight
Delivery!
Fast Strut™ 12 and 15 Curtain-Wall Connector

FS12 14 68 0.0713 1.81 4 x 2 x 12-1/4 101 x 50.8 x 311 1.560 0.706 10
FS15 14 68 0.0713 1.81 4 x 2 x 15-1/4 101 x 50.8 x 387 1.970 0.891 10
Includes 55 proprietary shoulder screws per box.
Custom lengths are available up to 24".

73
Dietrich04_074&075 3/22/04 12:35 PM Page 74
Head-of-wall, exterior curtain-wall

deflection clips for vertical building
movement.
Fast Top® Clip (FTC3/FTC5)
■ An excellent alternative to deflection track, slip-track

and track-over-track.
■ Fast Clip™ slip technology.
■ Available in 3” and 5” widths.
■ Attaches within the wall cavity.
■ Proprietary screws provide frictionless slip connections.
■ Embossed fastening patterns to ensure accurate
■ 14-gauge, G-90, 50 KSI steel.
The Dietrich Fast Top™ clip is used in head-of-wall deflection
conditions for in-fill curtain wall assemblies to provide for vertical wall
movement. These clips are used in place of or in combination with
deflection track and track-over-track assemblies. They also make a
positive attachment and do not require bridging or bracing for the
deflection system. The Fast Top™ deflection clip attaches to the
underside of structural members, concrete decks or floor assemblies.
Studs must be cut less than full height to enable vertical movement up
to 2-1/2" (1-1/4" up and down). Fast Top™ deflection clips quickly
install with welds, screws or powder actuated fasteners. Proprietary
screws ensure frictionless deflection. These clips are also embossed
with fastening patterns to ensure accurate placement of fasteners.
Patent Pending.
Available for
Overnight
Delivery!
Fast Top™ Clip (FTC3 and FTC5)
FTC3 14 68 0.0713 1.81 4 x 1-1/2 x 3-1/4 101 x 38.1 x 82.6 0.410 0.186 25
FTC5 14 68 0.0713 1.81 4 x 1-1/2 x 4-3/4 101 x 38.1 x 120 0.610 0.277 30
*Includes 110 proprietary shoulder screws per box.
74 dietrich metalframing •com The place to stop…before the building starts! SM

Dietrich04_074&075 3/22/04 12:40 PM Page 75
Self-gripping, slotted
deflection slide clip
for curtain-wall framing.
Slide Clip (SD2S)

■ Self-gripping slot holds stud for easy installation.
■ First generation low-cost deflection clip.
■ Requires additional framing components
for horizontal adjustment. Slide Clip SD2S
Dietrich™ SD2S slide clips are used

to attach exterior curtain-wall studs
to the building structure and
provide for vertical building
movement independent of the cold-
formed steel framing. SD2S slide
clips are used in by-pass situations
and are normally welded or
otherwise fastened to the vertical leg
of a structural angle at the floor or
roof edge. Normally a stand-off
exists between the structural angle
and the inside flange of the curtain-
wall stud. This will require the
installation of an extra stud piece
to bridge the stand-off. In order to
avoid the extra installation costs, the
Dietrich™ Fast Clip™ products are
recommended in place of the SD2S.
Available for
Overnight
Delivery!
Slide Clip (SD2S)

DMF Thickness Size Weight/Piece Packaging
SD2S 14 68 0.0713 1.81 2-1/4 x 3-1/2 57.1 x 88.9 0.400 0.181 48

75
Dietrich04_076&077 3/22/04 12:44 PM Page 76
Edge-of-slab deflection clip for

curtain wall framing.
■ First-generation low-cost deflection clip.
Slide Clip (SD)
■ Offset for easier welding.

■ Requires additional framing components
for horizontal adjustment.
■ 12- or 14-gauge, G-90, 50 KSI steel.
Slide Clip SD
Available for
Overnight
Delivery!
Dietrich™ slide clips are used to attach exterior

curtain-wall studs to the building structure and
provide for vertical building movement
independent of the cold-formed steel framing.
Slide clips are used in by-pass situations and are
normally welded or otherwise fastened to the
vertical leg of a structural angle at the floor or roof
edge. Normally a stand-off exists between the
structural angle and the inside flange of the
curtain-wall stud. This will require the installation
of an extra stud piece to bridge the stand-off. In
order to avoid the extra installation costs, Dietrich™
Fast Clip™ products are recommended in place of
the SD.
Slide Clip (SD)

SD 14 68 0.0713 1.81 2 3/8 x 5 60.3 x 127 0.600 0.271 50
SD 12 97 0.1017 2.58 2 3/8 x 5 60.3 x 127 0.840 0.380 50

Dietrich04_076&077 3/22/04 12:48 PM Page 77
Vertical Slide Clip that provides

up to 3" of horizontal standoff.
■ Quick installation—twist and fasten.
QuickClip™ (QC-Series™)
■ Horizontal stand-off up to 3”.
■ One-piece for right- or left-handed attachment.
■ Accommodates 1-5/8” and 2” flanges.
■ Standard 10-gauge, G-60, 50 KSI steel. QuickClip™
U.S. Patent No. 5, 836, 133 of B&D Industries
Available for
Overnight
Delivery!
Dietrich™ QuickClip™ vertical slide clips are used to

attach exterior curtain-wall studs to the building
structure and provide for vertical building movement
independent of the cold-formed steel framing. A
QuickClip™ slide clip provides variable standoff and
eliminates the need for shims or additional framing
components. The QuickClip™ slide clip simply twists
into place and fastens to the floor/ceiling beam. The
clips restrict lateral movement, but enable the curtain-
wall system to move vertically.
QuickClip™
DMF Thickness Stud Weight/Piece Packaging
Product Design Thickness Width Pcs./
Code Inches (mm) Inches Bucket
QC3 10 118 0.1242 3.15 3-5/8 0.940 0.426 50
QC4 10 118 0.1242 3.15 4 1.160 0.526 50
QC6 10 118 0.1242 3.15 6 1.460 0.662 50
QC8 10 118 0.1242 3.15 8 1.770 0.803 40

77
Dietrich04_078&079 3/22/04 12:52 PM Page 78
Universal framing clip used for

numerous rigid connections and Uni-Clip™
conditions, including two axis
loading, shear and tension.
Uni-Clip™ (UCEC)
■ Designed to transfer large horizontal and vertical loads.

■ Universal multiapplication connector.
■ Embossed fastening patterns to ensure accurate
Dietrich’s Uni-Clip™ framing clip is a

universal framing clip used to attach
and support numerous rigid framing
conditions. The Uni-Clip™ framing clip has
stiffened corners that provide superior
Available for
design values, and they are installed easily
with welds, screws or powder-actuated Overnight
fasteners. This clip is ideal for most rigid Delivery!
connections including shear, tension and
two-axis loading.
Patent Pending.
Uni-Clip™ (UCEC) Framing Clips

UCEC 14 68 0.0713 1.81 3-1/2 x 1-1/2 x 4-1/2 88.9 x 38.1 x 114 0.440 0.199 25
Dietrich04_078&079 3/22/04 12:55 PM Page 79
Exterior Light-Gauge Connections/Accessories for Rigid Connections
Long leg to accommodate greater

standoff for rigid connections
■ 4” leg accommodates large stand-off.
EasyClip™ E-Series™ Support Clips

■ Lengths available in 3”, 5”, 7”, 9” and 11”.
■ Available in 16, 14 and 12 gauge.
■ Prepunched for faster and accurate fastener attachment.
■ G-90, 50 KSI steel.
Dietrich™ EasyClip™ E-Series™ support clips are used for rigid

stand-off connections. The 4" wide leg provides extra length to
achieve stand-off connections up to 3". The EasyClip™ E-Series™ Available for
EasyClip™ E-Series™
clips are commonly used in bypass wall conditions, solid Overnight Support Clip
blocking attachments in joist framing and to secure rafter
framing to the primary structure. These clips are prepunched
Delivery!
for faster and more accurate fastener placement.

E543 16 54 0.0566 1.44 4 x 1-1/2 x 3 101 x 38.1 x 76.2 0.270 0.122 100
E545 16 54 0.0566 1.44 4 x 1-1/2 x 5 101 x 38.1 x 127 0.440 0.200 100
E547 16 54 0.0566 1.44 4 x 1-1/2 x 7 101 x 38.1 x 178 0.620 0.281 100
E549 16 54 0.0566 1.44 4 x 1-1/2 x 9 101 x 38.1 x 229 0.800 0.363 50
E541 16 54 0.0566 1.44 4 x 1-1/2 x 11 101 x 38.1 x 279 0.970 0.440 50
E683 14 68 0.0713 1.81 4 x 1-1/2 x 3 101 x 38.1 x 76.2 0.330 0.150 100
E685 14 68 0.0713 1.81 4 x 1-1/2 x 5 101 x 38.1 x 127 0.550 0.249 100
E687 14 68 0.0713 1.81 4 x 1-1/2 x 7 101 x 38.1 x 178 0.770 0.349 80
E689 14 68 0.0713 1.81 4 x 1-1/2 x 9 101 x 38.1 x 229 0.990 0.449 50
E681 14 68 0.0713 1.81 4 x 1-1/2 x 11 101 x 38.1 x 279 1.220 0.553 50
E973 12 97 0.1017 2.58 4 x 1-1/2 x 3 101 x 38.1 x 76.2 0.470 0.213 50
E975 12 97 0.1017 2.58 4 x 1-1/2 x 5 101 x 38.1 x 127 0.780 0.354 50
E977 12 97 0.1017 2.58 4 x 1-1/2 x 7 101 x 38.1 x 178 1.090 0.494 50
E979 12 97 0.1017 2.58 4 x 1-1/2 x 9 101 x 38.1 x 229 1.410 0.640 50
E971 12 97 0.1017 2.58 4 x 1-1/2 x 11 101 x 38.1 x 279 1.720 0.780 40

79
Dietrich04_080&081 3/22/04 12:59 PM Page 80
Used in any rigid connection application

not requiring a long leg.
■ 1-1/2” x 1-1/2” legs.
EasyClip™ S-Series™ Support Clips
■ Lengths available in 3”, 5”, 7”, 9” and 11”.

■ Prepunched for faster and more accurate fastener placement.
■ G-90, 50 KSI steel. EasyClip™ S-Series™ Support Clip
Dietrich™ EasyClip™ S-Series™

support clips are used for
rigid connections in window
and door framing. These clips
are also used in joist, bypass
or other miscellaneous
connections to secure one
framing member to another
or to secure framing members
to the structural frame.
EasyClip™ S-Series™ clips are
prepunched for faster and
more accurate fastener
placement.
Available for
Overnight
Delivery!

S543 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 3 38.1 x 38.1 x 76.2 0.140 0.064 400
S545 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 5 38.1 x 38.1 x 127 0.240 0.109 200
S547 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 7 38.1 x 38.1 x 178 0.340 0.154 100
S549 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 9 38.1 x 38.1 x 229 0.430 0.195 100
S541 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 11 38.1 x 38.1 x 279 0.530 0.240 100
S683 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 3 38.1 x 38.1 x 76.2 0.180 0.082 200
S685 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 5 38.1 x 38.1 x 127 0.300 0.136 200
S687 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 7 38.1 x 38.1 x 178 0.420 0.191 100
S689 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 9 38.1 x 38.1 x 229 0.540 0.245 100
S681 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 11 38.1 x 38.1 x 279 0.660 0.299 100
S973 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 3 38.1 x 38.1 x 76.2 0.260 0.118 200
S975 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 5 38.1 x 38.1 x 127 0.430 0.195 150
S977 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 7 38.1 x 38.1 x 178 0.600 0.272 100
S979 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 9 38.1 x 38.1 x 229 0.770 0.349 80
S971 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 11 38.1 x 38.1 x 279 0.940 0.426 70
Dietrich04_080&081 3/22/04 1:03 PM Page 81
Used to secure U-channel (cold rolled channel)

to framing member for lateral bridging.
■ 1-1/2” x 1-1/2” legs.
EasyClip™ U-Series™ Support Clips

■ Lengths available in 3-3/8”, 5-3/4”, 7-3/4” and 9-3/4”.
■ Prepunched for faster and more accurate fastener placement.
EasyClip™ U-Series™ Support Clip
Dietrich™ EasyClip™ U-Series™ support clips

are used to secure U-channel to wall studs
for lateral bridging. U-channel is passed
through the stud knockout and an EasyClip™
U-Series™ clip is screw attached or welded to
provide a rigid connection. EasyClip™
U-Series™ clips are prepunched for faster and
more accurate fastener placement.
Available for
Overnight
Delivery!
EasyClip™ U-Series™ Support Clips

U543 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 3-3/8 38.1 x 38.1 x 85.7 0.16 0.07 400
U545 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 5-3/4 38.1 x 38.1 x 146 0.28 0.13 200
U547 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 7-3/4 38.1 x 38.1 x 197 0.37 0.17 100
U549 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 9-3/4 38.1 x 38.1 x 248 0.47 0.21 100
U683 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 3-3/8 38.1 x 38.1 x 85.7 0.20 0.09 200
U685 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 5-3/4 38.1 x 38.1 x 146 0.35 0.16 170
U687 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 7-3/4 38.1 x 38.1 x 197 0.47 0.21 100
U689 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 9-3/4 38.1 x 38.1 x 248 0.59 0.27 100
U973 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 3-3/8 38.1 x 38.1 x 85.7 0.29 0.13 200
U975 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 5-3/4 38.1 x 38.1 x 146 0.49 0.22 130
U977 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 7-3/4 38.1 x 38.1 x 197 0.66 0.30 100
U979 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 9-3/4 38.1 x 38.1 x 248 0.83 0.38 80

81
Dietrich04_082&083 3/22/04 1:29 PM Page 82
Used to secure U-channel

in back-to-back framing
applications.
EasyClip™ B-Series™ Support Clips
■ 1-1/2” x 1-1/2” legs.

■ Available in 3”, 5-1/4”, 7-1/4” and
9-1/4” lengths.
■ Available in 16, 14 and 12 gauge. EasyClip™ B-Series™ Clip
■ Pre-punched for faster and more accurate

fastener placement.
Dietrich™ EasyClip™ B-Series™ support clips are used to

secure U-channel to wall studs in back to back applications.
The shorter leg of the B-Series™ clip enables the clip to be
installed inside the C-shape. The B-Series™ clip can also be
used on single studs where the clip is preferred to be
inside the C-shape. B-Series™ clips are prepunched for
faster and more accurate fastener placement.
Available for
Overnight
Delivery!
EasyClip™ B-Series™ Support Clips

B543 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 3 38.1 x 38.1 x 76.2 0.15 0.07 400
B545 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 5-1/4 38.1 x 38.1 x 133 0.25 0.12 200
B547 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 7-1/4 38.1 x 38.1 x 184 0.35 0.16 100
B549 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 9-1/4 38.1 x 38.1 x 235 0.45 0.20 100
B683 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 3 38.1 x 38.1 x 76.2 0.18 0.08 200
B685 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 5-1/4 38.1 x 38.1 x 133 0.32 0.15 170
B687 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 7-1/4 38.1 x 38.1 x 184 0.44 0.20 100
B689 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 9-1/4 38.1 x 38.1 x 235 0.57 0.26 100
B973 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 3 38.1 x 38.1 x 76.2 0.26 0.12 200
B975 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 5-1/4 38.1 x 38.1 x 133 0.46 0.21 130
B977 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 7-1/4 38.1 x 38.1 x 184 0.63 0.29 100
B979 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 9-1/4 38.1 x 38.1 x 235 0.81 0.37 80

Dietrich04_082&083 3/22/04 1:32 PM Page 83
Multipurpose support clip

used to secure one framing
member to another.
EasyClip™ X-Series™ Support Clips

■ 2” x 2” legs.
■ Available in 3-3/8”, 5-3/4”, 7-3/4” and 9-3/4” lengths.
■ Prepunched for faster and more accurate fastener EasyClip™ X-Series™ Support Clip
placement.
Dietrich™ EasyClip™ X-Series™ support clips are

used to secure one framing member to another
or to attach and reinforce headers and sills in
door and window openings. X-Series™ clips are
prepunched for faster and more accurate
fastener placement.
Available for
Overnight
Delivery!
EasyClip™ X-Series™ Support Clips
X543 16 54 0.0566 1.44 2 x 2 x 3-3/8 50.8 x 50.8 x 85.7 0.194 0.088 200
X545 16 54 0.0566 1.44 2 x 2 x 5-3/4 50.8 x 50.8 x 146.0 0.324 0.146 170
X547 16 54 0.0566 1.44 2 x 2 x 7-3/4 50.8 x 50.8 x 196.8 0.453 0.205 100
X549 16 54 0.0566 1.44 2 x 2 x 9-3/4 50.8 x 50.8 x 247.6 0.583 0.264 100
X683 14 68 0.0713 1.81 2 x 2 x 3-3/8 50.8 x 50.8 x 85.7 0.245 0.111 200
X685 14 68 0.0713 1.81 2 x 2 x 5-3/4 50.8 x 50.8 x 146.0 0.408 0.185 100
X687 14 68 0.0713 1.81 2 x 2 x 7-3/4 50.8 x 50.8 x 196.8 0.571 0.258 100
X689 14 68 0.0713 1.81 2 x 2 x 9-3/4 50.8 x 50.8 x 247.6 0.734 0.332 80
X973 12 97 0.1017 2.58 2 x 2 x 3-3/8 50.8 x 50.8 x 85.7 0.349 0.158 100
X975 12 97 0.1017 2.58 2 x 2 x 5-3/4 50.8 x 50.8 x 146.0 0.582 0.263 100
X977 12 97 0.1017 2.58 2 x 2 x 7-3/4 50.8 x 50.8 x 196.8 0.814 0.369 60
X979 12 97 0.1017 2.58 2 x 2 x 9-3/4 50.8 x 50.8 x 247.6 1.047 0.474 60

83
Dietrich04_084&085 3/22/04 1:35 PM Page 84
Used in knee wall connections

or to reinforce jamb stud
connections at the primary frame.
EasyClip™ A-Series™ End Clips
■ 3” x 3” legs.
■ A-Series clips are unpunched.
■ Lengths available: 3” and 6”.
■ G-90, 50 KSI steel. EasyClip™ A-Series™ End Clips
Available for
Overnight
Delivery!
Dietrich™ EasyClip™ A-Series™ end clips are most

commonly used to reinforce connections in knee
wall applications or to reinforce jamb stud
connections to the primary frame. These clips
are unpunched as the specific application will
determine the appropriate number and placement
of fasteners.
EasyClip™ A-Series™ End Clips

A543 16 54 0.0566 1.44 3" x 3" x 3" 76.2 x 76.2 x 76.2 0.290 0.131 50
A546 16 54 0.0566 1.44 3" x 3" x 6" 76.2 x 76.2 x 152 0.580 0.262 50
A683 14 68 0.0713 1.81 3" x 3" x 3" 76.2 x 76.2 x 76.2 0.360 0.163 50
A686 14 68 0.0713 1.81 3" x 3" x 6" 76.2 x 76.2 x 152 0.720 0.326 50
A973 12 97 0.1017 2.58 3" x 3" x 3" 76.2 x 76.2 x 76.2 0.510 0.231 50
A976 12 97 0.1017 2.58 3" x 3" x 6" 76.2 x 76.2 x 152 1.020 0.462 50
Dietrich04_084&085 3/22/04 1:39 PM Page 85
Used to secure and hold down shear

walls to the structure foundation.
■ Three sizes for optimal performance.
Simpson™ Holdowns (HD Series) & Simpson™ Tension Ties (HT14)

■ Two-piece welded construction.
■ ICBO ER #5275 recognized.
Simpson* Holdowns provide cost-

effective shear wall attachment with
allowable loading available
for 20- through 16-gauge studs.
Installation is made easy with
prepunched holes. Fill each hole
with a #10 screw
for maximum load capacity.
Available for
Overnight
Delivery!
Simpson™ Holdowns (HD Series)
DMF Thickness Size Weight/Piece
Product Design Thickness Packaging
Code Inches (mm)
HD8 10 118 0.1242 3.15 2-1/2 x 13-7/8 63.5 x 352 3.30 1.49 Package
HD10 10 118 0.1242 3.15 2-1/2 x 16-1/8 63.5 x 410 3.40 1.54 dependent on
HD15 7 170 0.1790 4.55 2-3/4 x 21-1/2 69.9 x 546 7.50 3.39 order quantity
Single-piece tension tie

for shear wall anchorage.
■ Single-piece construction.
■ Post pour installation.
■ ICBO ER #5275 recognized.
Simpson™ Tension Ties are
designed to provide an economical
option for light to medium uplift
requirements. Simply screw tension
ties, with #10 screws, to the studs Available for
through prepunched holes and
secure to the foundation with
Overnight
anchor bolts. Delivery!
Simpson™ Tension Ties (HT14)
HT14 11 114 0.120 3.048 2-1/2 x 15 63.5 x 381 2.150 0.975 10
*Simpson is a trademark of the Simpson Strong-Tie Company, Inc.
For more information or to contact a sales representative, see page 3

85
Dietrich04_086&087 3/22/04 1:43 PM Page 86
Bridging installation up to 30%

faster with up to 40% less labor.
■ Fast, easy and efficient installation.
Spazzer® 5400
■ Reduces labor up to 40%.
Spazzer® 5400 (SPZS) and Spazzer® Bar Guard™ (SPBG)
■ Eliminates clip angles, bridging clips and welding.

■ Prenotched at 12”, 16” and 24” intervals so no layout
is required.
Dietrich™ TradeReady® Spazzer® 5400 bridging bar is a prenotched,
16-gauge, galvanized steel spacer and bridging bar, engineered to
facilitate the rapid erection of exterior curtain-wall framing, load-bearing
Spazzer® Bar
walls and high interior partitions constructed of structural studs. Guard™
Until now, most bridging in steel studs was accomplished with cold rolled channel that
requires bridging clips or welding. The Spazzer® bridging bar is equipped with proprietary
prepunched slots that reduce installation costs and provide excellent torsional and lateral
stud restraint.
Nonload-Bearing Wall Load-Bearing Wall

Installation: The TradeReady® Installation: The TradeReady®
Spazzer® 5400 bar is passed through the Spazzer® 5400 bar is passed through
stud knockouts and rotated 90˚ to the stud knockouts and rotated 90˚
position, engaging each side of the to position, engaging each side of
knockout. For 20-gauge studs, the knockout. For load-bearing
the Spazzer® 5400 Bar studs, the Spazzer® 5400 Bar
Guard™ bar retainer clip or Guard™ bar retainer clip or
screws are required to keep the screws are required to keep the
bar in place. The TradeReady® bar in place. The TradeReady®
Spazzer® 5400 bar should be installed Spazzer® 5400 bar should be installed
at maximum 5' O.C. vertically, or per at a maximum 4' O.C. vertically or per
specification, and should not be used in studs specifications. The TradeReady® Spazzer® bar
over 6" wide. should not be used in studs over 6" wide.
U.S. Patent No. 6, 708, 460 and

other Patents Pending
Available for
Overnight
Delivery!
Spazzer® Bar Guard™ (SPBG)

DMF Size Weight/Pc. Packaging
Product Pcs./
Inches (mm) lbs, (kg)
Code Box
SPBG 3-1/4 x 1-5/8 82.6 x 41.3 0.05 0.02 100
Spazzer® 5400 (SPZS)

SPZS 16 54 0.0566 1.44 1-1/4 x 1-1/4 x 50 31.8 x 31.8 x 1270 2.060 0.934 NA 680
Dietrich04_086&087 3/22/04 1:46 PM Page 87
Exterior Light-Gauge Framing Accessories for Bridging and Bracing
Traditional cold-rolled bridging with clip angle

and screw attachment.
■ Traditional bracing to prevent stud rotation.
U-Channel (CHN) and EasyClip™ Clip Angles (U-Series™)

■ EasyClip™ U-Series™ clips are punched for easy attachment.
■ Labor-intensive assembly. U-Channel
Dietrich™ U-Channel, EasyClip™

U-Series™ clip angles and screws are
one of the most common bridging
methods used to provide resistance
to stud rotation and minor axis
bending under wind and axial loads.
1-1/2" U-Channel is passed through
the stud knockout and secured
EasyClip™ U-Series™
with EasyClip™ U-Series™ clip Support Clip
angles and screws. Lateral bracing
is typically installed at a maximum
of 48" O.C. Consult Dietrich’s
Technical Design Guide for proper
spacing when using the design tables.
Caution: EasyClip™ U-Series™ clip angles must be used
with screws to brace cold-formed framing properly.
U-Channel does not provide proper bracing if it is not
adequately attached to the framing member.
U-Channel (CHN Series™)

SSMA
CHN1 075U50-54 16 54 0.0566 1.44 3/4 19.1 0.250 0.113 10 360
CHN2 150U50-54 16 54 0.0566 1.44 1-1/2 38.1 0.420 0.190 10 330

U543 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 3-3/8 38.1 x 38.1 x 85.7 0.160 0.072 400
U545 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 5-3/4 38.1 x 38.1 x 146 0.280 0.127 200
U547 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 7-3/4 38.1 x 38.1 x 196 0.370 0.167 100
U549 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 9-3/4 38.1 x 38.1 x 248 0.470 0.213 100
*Also available in 14 and 12 gauge.

87
Dietrich04_088&089 3/22/04 1:50 PM Page 88
Traditional cold-rolled bridging with

weld attachment.
■ Traditional bracing to prevent stud rotation.
U-Channel (CHN) and Welding
■ Welds are required at all connection points.

■ Specialized equipment and personnel are required.
Dietrich™ U-Channel and welded

U-Channel
attachments provide horizontal
bridging to resist stud
rotation and minor axis
bending under wind
and axial loads. 1-1/2"
U-Channel is passed
through the stud
knockout and
welded at all
attachment points.
Lateral bridging is typically
installed at a maximum of 48" O.C.
spacing. Consult Dietrich’s Technical Caution: Extreme care should be taken in the quality of
Design Guide for proper bridging spacing when using the the weld. If the weld burns through or does not penetrate,
design tables. Welded U-Channel should not be used in the U-channel will not be effective.
studs wider than 6"
U-Channel (CHN Series™) and Welding

SSMA
CHN2 150U50-54 16 54 0.0566 1.44 1-1/2 38.1 0.420 0.190 10 330
Dietrich04_088&089 3/22/04 1:52 PM Page 89
Commonly used bracing for wall

studs deeper than 6".
■ Provides horizontal bracing for studs deeper than 6”.
Block (TSB) and Strap (DT Series™)

■ Blocking is field cut.
■ Used if knockouts do not align.
Properly spaced
horizontal steel bracing
provides resistance to
stud rotation and minor
axis buckling under wind DT Strapping
and axial loads. Block and
strapping is typically used
when wall studs exceed
6". U-Channel or the
Spazzer® bar does not
provide sufficient bracing
for members wider than
6". Both stud flanges must
be attached to top and bottom runner flanges to provide proper
end support. Floor and ceiling runners must also be anchored
securely to the structure. To utilize the stud’s load carrying
capacity fully, horizontal bracing must be installed at proper
intervals.
Lateral bracing consists of a field-cut stud or track for solid blocking
and steel strap bracing on both flanges of the studs. Solid blocking
is placed at each end of the wall, adjacent to wall openings and 8'
O.C. maximum. The blocking is attached to each adjacent stud via
EasyClip™ E- or S- Series™ clips, or when a track is used, the flanges
are cut, the web bent and a minimum 4" overlap is used to secure
the track block to the studs. Strap bracing, 2" wide and 20-gauge
(33 mil) minimum, is fastened to each solid block and stud flange.
Solid Blocking (CS/TS)

Blocking is typically field cut from the same or heavier excess track stock and secured between wall studs. Stud stock is also an option. Studs are attached using EasyClip™
S-Series™ Clip Angles. Blocking should be installed in the first and last two bays and every 8 feet in between.
Strapping (DT Series™)
DMF Thickness Size Available Packaging
Length
Product Design Thickness Min. Width Max. Width Pcs./
Gauge Mils
Code Inches (mm) Inches (mm) Inches (mm) ft. (m) Skid
20 33 0.0346 0.879 2 50.8 12 305 10 3.05 250
18 43 0.0451 1.146 2 50.8 12 305 10 3.05 250
DTN3 16 54 0.0566 1.438 2 50.8 12 305 10 3.05 250
14 68 0.0713 1.811 2 50.8 12 305 10 3.05 250
12 97 0.1017 2.583 2 50.8 12 305 10 3.05 250
16 54 0.0566 1.438 2 50.8 12 305 10 3.05 250
DTN5 14 68 0.0713 1.811 2 50.8 12 305 10 3.05 250
12 97 0.1017 2.583 2 50.8 12 305 10 3.05 250
DTN3 has a yield strength of 33,000 psi.

89
Dietrich04_090&091 3/22/04 1:57 PM Page 90
Light-gauge steel X-bracing for

load-bearing framing to resist racking
under wind and seismic loads.
Diagonal Tension Strapping/Shear Wall Bracing (DT)/Gusset Plates (GP) for Shear Wall Bracing
■ Strapping is available in flat lengths and coil form.

■ Available widths are 2”, 4”, 6”, 8”, 10” and 12”.
■ Gauges: 20 (33 mils), 18 (43 mils), 16 (54 mils), 14 (68 mils)
and 12 (97 mils).
■ Standard gusset plate sizes are 6”x6”, 6”x12” and 12”x12”. DT Strapping
Dietrich™ diagonal
tension strapping
and gusset plate
components are used
in combination to
provide shearwall
(racking restraint)
for light-gauge
load- bearing framing
under wind and
seismic loads. They Gusset Plates
are normally installed on
both sides of the wall directly over that embed plates be installed prior to pouring the concrete
framing members and are easily covered with foundation. A heavy steel assembly is then welded to the
facing materials. embed plate and to the compression studs.
Straps are positioned diagonally from the bottom track to Caution: Racking loads are first transferred to the roof or
the top track. In order to resist load in each direction, an floor decking and then to the shearwalls (X-bracing). The X-
X-configuration should be used. At a minimum, double studs bracing then relies on a proper foundation to resist uplift and
are positioned at ends of the X-brace to serve as compression shear forces. In order for the system to function properly, the
studs. Straps are either attached directly to the compression load path from the roof or floor deck to the shearwalls to the
studs or are attached via gusset plates. Compression studs foundation must be complete. This normally requires
must be anchored to the foundation, normally with Simpson* additional bracing, blocking, track and rim splices, drag struts,
uplift anchors. For multi-story construction, the uplift loads are uplift anchors and heavy-duty foundations.
extremely high. It is not uncommon to require 20,000 to
40,000 pounds of uplift force at these connections. Since
Simpson™ anchors are not designed to resist
this magnitude of force, it is
recommended
*Simpson is a trademark of Simpson Strong-Tie Company, Inc.
Dietrich04_090&091 3/22/04 2:02 PM Page 91
Diagonal Tension Strapping/Shear Wall Bracing (DT)/Gusset Plates (GP) for Shear Wall Bracing
Diagonal Tension Strapping/Shear Wall Bracing (DT)
DMF Thickness Size Available Packaging
Gauge Mils
Code Inches (mm) Inches (mm) Inches (mm) Skid
20 33 0.0346 0.879 2 50.8 12.0 305 1 coil
18 43 0.0451 1.146 2 50.8 12.0 305 1 coil
DTNC* 16 54 0.0566 1.438 2 50.8 12.0 305 1 coil
14 68 0.0713 1.811 2 50.8 12.0 305 1 coil
12 97 0.1017 2.583 2 50.8 12.0 305 1 coil
*20- and 18-gauge are 33,000 psi yield strength. 16-, 14- and 12-gauge are 50,000 psi yield strength.
Gusset Plates (GP) for Shear Wall Bracing

DMF Thickness Plate Size Weight/ft. Packaging
6 x 6 152 x 152 0.580 0.262 25
16 54 0.0566 1.440 6 x 12 152 x 305 1.170 0.529 25
12 x 12 305 x 305 2.330 1.054 25
GP
6 x 6 152 x 152 1.050 0.475 25
12 97 0.1017 2.580 6 x 12 152 x 305 2.090 0.946 25
12 x 12 305 x 305 4.190 1.896 25

91
Dietrich04_092&093 3/22/04 2:05 PM Page 92
Heavy-gauge utility or corner angle.

■ Standard leg sizes are 2”x2”, and 3”x3”.
■ Wider and uneven leg sizes available.
Corner Angle (CAM)
■ Available in 18, 16, 14 and 12 gauge.

■ Standard 10’ lengths. Other lengths available on request.
Dietrich™ heavy-gauge corner angle is commonly used for a

variety of applications including: a concrete pour stop, a
connection strut or angle, roof ridge angles and corner
reinforcement.
Corner Angle
Corner Angle (CAM)

CAE 20 33 0.0346 0.879 2 x 2 50.8 x 50.8 10 3.05 0.470 0.213 500
18 43 0.0451 1.146 2 x 2 50.8 x 50.8 10 3.05 0.620 0.281 250
16 54 0.0566 1.438 2 x 2 50.8 x 50.8 10 3.05 0.770 0.348 250
CAM
14 68 0.0713 1.811 2 x 2 50.8 x 50.8 10 3.05 0.980 0.443 250
12 97 0.1017 2.583 2 x 2 50.8 x 50.8 10 3.05 1.400 0.633 250
CAE 20 33 0.0346 0.879 3 x 3 76.2 x 76.2 10 3.05 0.680 0.308 500
18 43 0.0451 1.146 3 x 3 76.2 x 76.2 10 3.05 1.020 0.462 250
16 54 0.0566 1.438 3 x 3 76.2 x 76.2 10 3.05 1.290 0.584 250
CAM
14 68 0.0713 1.811 3 x 3 76.2 x 76.2 10 3.05 1.530 0.692 250
12 97 0.1017 2.583 3 x 3 76.2 x 76.2 10 3.05 2.140 0.968 250
*Other sizes available on request.
Dietrich04_092&093 3/22/04 2:09 PM Page 93
Exterior Light-Gauge Framing Accessories for Various Framing Applications
Heavy-duty furring provides greater resistance

to deflection and bending. Greater spans and
heavier loads are achieved as a result.
Heavy-Duty Furring Channel (FCM)

■ Standard sizes are 7/8” and 1-1/2” deep. Heavy-Duty
■ Available in 16 and 18 gauge. Furring
Channel
Dietrich™ heavy-duty
furring channel is a high-
performance hat-shaped
framing component used
in ceiling, exterior wall and roof
applications. In ceiling applications, heavy-duty furring
is tie-wired or mechanically fastened to bar joists, other roof or floor framing.
Gypsum wallboard is secured to the furring. In roof applications, heavy-gauge
furring is used as purlins to provide connection points for roof sheathing.
Heavy-Duty Furring Channel (FCM)

SSMA
FCM 087F125-43 18 43 0.0451 1.15 0.555 0.251 250
7/8 22.2
FCM 087F125-54 16 54 0.0566 1.44 0.670 0.303 250
FCMD 150F125-43 18 43 0.0451 1.15 0.733 0.332 250
1-1/2 38.1
FCMD 150F125-54 16 54 0.0566 1.44 0.920 0.416 250

93
Dietrich04_094 3/22/04 2:14 PM Page 94
Custom fabricated shapes, clips, bends,

continuous angles, long leg tracks
and miscellaneous closures.
Custom Shapes and Miscellaneous Angles (VS)
■ Precision fabrication meeting

exacting specifications.
■ Wide array of custom options.
■ Fully dimensioned part
drawings must be provided.
Dietrich custom fabricates just about any shape, bend,

angle or specialty framing component to your exact
specification. Custom parts include corner
angles, roof ridge angles, clip angles, long
and uneven leg tracks, eave
closures, support clips and
furring channels. To ensure
proper fabrication, Dietrich
requires a detailed, fully
dimensioned part drawing at
time of order placement.
Floor Joist Systems/Components

Light-Gauge C-Joist Framing
(CS/TS Series™) ..............................98-99
TradeReady® Steel Joists
(TDJ and TDW Series™) ..........100-101
TradeReady® Rim ................................102
TradeReady® Structural
Blocking (TDSB) ..................................103
Floor Joist Framing Accessories
Block (TS/CS), Strap (DTN)
and EasyClip™
(E- and S- Series™) ....................104-105
Web Stiffeners (WS),
Web Stiffeners (WS2P) ....................106
Simpson™ Tension
Bracing (TB27) ....................................107
TradeReady® Structural
Blocking (TDSB) ..................................107
Floor Joist Hangers
and Connectors
Simpson™ (SJCT) 8-14 Hanger ......108
Simpson™ Bridle Hanger
(SLBV/SMB)(JH2) ..............................109
Simpson™ Ledger Connector
System (ICFL) ......................................110
Simpson™ Skewable Angle
Hangers (SLS5/SLS7) ......................111
Lateral Tie Plate (LPT4) ....................112
Foundation Clips (FDCL)..................113
95
Floor Joist Systems/

FLOOR Components
FRAMING Floor joist components are available in a variety
of web sizes, flanges, gauges and yield strengths.
OVERVIEW This wide selection of webs, flanges, gauges and
Floor Framing Overview
yield strengths (KSIs) enable the designer to

Light-gauge C-studs/joists are com- obtain optimal performance at economical
monly used in floor framing assem- prices.
blies. C-Joists are a cost-effective alter-
native to open web trusses, bar joists, Dietrich’s conventional C-Joist system is made
engineered lumber, and cast-in-place up of joists, track, clips, web stiffeners, solid
or hollow-core floor assemblies. Light blocking and strapping to complete an entire
steel framing (C-Joists) are ideal for assembly.
low- and mid-rise commercial appli-
The revolutionary TradeReady® Floor System is
cations such as hotels, motels, apart-
comprised of the TradeReady® Joist with large
ment complexes, condominiums,
extruded holes, TradeReady® Rim Joist with pre-
multi-family, and assisted living. Steel
punched layout tabs and embedded stiffening
joists are also being used more exten-
ribs, and pre-cut structural blocking. The system
sively in residential structures.
is complemented with EasyClip™ S- and E-series™
Steel’s high strength-to-weight ratio clips and web stiffeners when necessary.
provides strong loading capacity and
maximum spanning capability. Joists
are commonly spaced at 12", 16",
19.2" or 24" intervals and are used in
conjunction with all traditional
flooring materials such as plywood,
OSB, concrete filled steel deck, or one Floor Joist Framing Accessories
of the many varieties of fiber rein-
Dietrich Metal Framing offers a wide selection of floor framing accessories to ensure
forced cement board.
maximum floor performance. Choose from our wide assortment of web stiffeners,
Dietrich offers a variety of floor fram- blocking, bracing and strapping.
ing systems including conventional
C-Joist and the TradeReady® Steel Floor Joist Hangers and Connectors
Joist System. The TradeReady® Steel
Joist System features large extruded Dietrich’s wide assortment of hangers and connectors gives you the flexibility to
openings in the joist to accommodate choose from a variety of products that provide connection solutions to complex
electrical, mechanical, plumbing framing details. Choose from our universal joist, bridle, skewable and ICF hangers.
and technology lines. The system also
includes a tabbed rim track to
strengthen the joist against web crip-
pling loads, and to provide greater
versatility and strength for ledger
applications. This system, in con-
junction with other floor sheathing
products, provides one of the most
cost-effective systems for non-com-
bustible low and mid-rise structures.
Overview
The Dietrich
TradeReady®
Floor System
Floor Framing Overview

Use instead of
wood joists.
■ Long-term price stability.
■ Steel is recycled — saves
trees.
■ Eliminates floor squeak
complaints.
Prespaced joist tabs.

■ No layout required.
■ Eliminates joist hangers.
Greater spanning
capabilities.
■ Design flexibility.
■ Wider o.c. spacing
requires fewer joists.
■ Wide flange for plywood
attachement.
■ Structural blocking
prevents racking.
Prepunched openings.
■ No drilling or cutting
joist webs.
■ Increases ceiling height.
■ Eliminates soffit framing.
U.S. Patent Nos. 6,301,854; 6,418,694; 6,691,478 and other U.S. and foreign patents pending.

97
Dietrich04_098&099 3/22/04 3:25 AM Page 98
Conventional C-Joist components

provide a lightweight, low-cost,
rigid floor assembly.
Light-Gauge C-Joist Framing (CS/TS Series™)
■ Precut to exacting sizes and readily available.

■ Joist sizes include 8”, 10”, 12” and 14”.
■ Available in 18, 16, 14 and 12 gauge.
■ Flange widths include 1-5/8”, 2”, 2-1/2” and 3”. C-Joist
Dietrich™ C-Joist components provide an economical, lightweight alternative to open web trusses, bar
joists, engineered lumber, cast-in-place or hollow core floor assemblies. Depending on loads and spans,
C-Joists are typically spaced at 12", 16", 19.2" or 24" on-center spacing. Structural track (TSB), usually
in the same gauge as the joist, is used as rim or band enclosures. Joist to girder attachments are
normally supported with joist hangers, EasyClip™ E-Series™ or S-Series™ support clips. Web stiffeners
may be required at supports and other point loads. Solid blocking and strap bridging is required to
properly brace the floor assembly.
Consult Dietrich’s Technical Design Guide for physical and structural properties, span charts and
load tables.

SSMA
Product Gauge
Reference Inches (mm) Inches (mm) Inches (mm)
Code* (mils)
800S162-x 18 (43) 8 203 1-5/8 41.3 1/2 12.7
1000S162-x 16 (54) 10 254 1-5/8 41.3 1/2 12.7
CSJ (3, 5)
1200S162-x 14 (68) 12 305 1-5/8 41.3 1/2 12.7
1400S162-x 12 (97) 14 356 1-5/8 41.3 1/2 12.7
800S200-x 18 (43) 8 203 2 50.8 5/8 15.9
1000S200-x 16 (54) 10 254 2 50.8 5/8 15.9
CSW (3, 5)
1200S200-x 14 (68) 12 305 2 50.8 5/8 15.9
1400S200-x 12 (97) 14 356 2 50.8 5/8 15.9
800S250-x 18 (43) 8 203 2-1/2 63.5 5/8 15.9
1000S250-x 16 (54) 10 254 2-1/2 63.5 5/8 15.9
CSE (3, 5)
1200S250-x 14 (68) 12 305 2-1/2 63.5 5/8 15.9
1400S250-x 12 (97) 14 356 2-1/2 63.5 5/8 15.9
800S300-x 18 (43) 8 203 3 76.2 1 25.4
1000S300-x 16 (54) 10 254 3 76.2 1 25.4
CSS (3, 5)
1200S300-x 14 (68) 12 305 3 76.2 1 25.4
1400S300-x 12 (97) 14 356 3 76.2 1 25.4
*3 or 5 indicates ksi. 33 ksi is standard. 50 ksi must be specified at time of order.
x= SSMA reference of mils at the end of the character string.
Dietrich04_098&099 3/22/04 3:26 AM Page 99

Structural Track (Rim)
Rim Track (TS Series™)

DMF Thickness Depth Flange
SSMA
Product Gauge
Reference Inches (mm) Inches (mm)
Code* (mils)
800T125-x 18 (43) 8 203 1-1/4 31.8
1000T125-x 16 (54) 10 254 1-1/4 31.8
TSB
1200T125-x 14 (68) 12 305 1-1/4 31.8
1400T125-x 12 (97) 14 356 1-1/4 31.8
*TSB is standard as 33,000 psi yield strength.
*The depth of TSB is measured to the inside of the flanges.
x= SSMA reference of mils at the end of the character string.

99
Dietrich04_100&101 3/22/04 3:28 AM Page 100
Next-generation, high-performance TradeReady®

Steel Joists are the premier floor joist system
for both commercial and residential framing.
TradeReady® Steel Joists (TDJ and TDW Series™)
■ Clear spans up to 33’.

■ Large extruded openings to accommodate electrical, TradeReady® Joists
HVAC, plumbing and technology lines.
■ Hole sizes range from 4-1/4” oval to 10” round based
on member depth.
■ Superior strength permits wider O.C. spacing.
■ Precut to your exact specifications—no waste.
■ Available in 7-1/4”, 8”, 9-1/4”, 10”, 11-1/4”, 12”
and 14” deep members.
■ Flange sizes include 1-3/4” and 2”.
■ Eliminates soffit framing.
■ UL** Classified assembly L564.
Dietrich™ TradeReady® steel joists are one of the primary
components that make up the TradeReady® floor system. These
joists feature large extruded holes that accommodate HVAC,
mechanical, plumbing and sprinkler runs. The joist also features
a series of smaller holes for electrical and technology lines.
Dietrich™ TradeReady® steel joists are precision manufactured
from corrosion-resistant galvanized steel. Steel joists offer
consistent quality, predictable performance and high strength
to weight ratio, and they are dimensionally stable. They won’t
expand, contract or shrink; they won’t warp, crack or twist.
Steel joists integrate easily with other building materials such
as structural steel, concrete, ICF and wood construction.
Joists can be ordered in standard lengths or to your exact
specifications to minimize waste. Consult the Dietrich™ Technical
Design Guide or the TradeReady® Steel Joist Design Guide for
physical and structural properties, span charts and loading data.
TradeReady® Steel Joist (TD Series™)
Product Gauge Inches (mm) Inches (mm) Inches (mm)
Code* (mils)
18(43) 7-1/4 184 1 3/4 44.5 5/8 15.9
16(54) 8 203 1 3/4 44.5 5/8 15.9
TDJ (3,5)
14(68) 9-1/4 235 1 3/4 44.5 5/8 15.9
12(97) 11-1/4 286 1 3/4 44.5 5/8 15.9
18(43)
10 254 2 50.8 5/8 15.9
16(54)
TDW (3,5) 12 305 2 50.8 5/8 15.9
14(68)
14 356 2 50.8 5/8 15.9
12(97)
*3 or 5 indicates ksi.
18-gauge is standard as 33 ksi yield strength.
16,14 and 12 gauge are standard as 50 ksi yield strength.
**UL and UL Classified are trademarks of Underwriter’s Laboratories, Inc.
Dietrich04_100&101 3/22/04 3:29 AM Page 101
TradeReady® Steel Joists (TDJ and TDW Series™)

TradeReady® Joist (TD Series™)
Hole Hole Web
Hole
Size Size Width
Shape
Inches (mm) Inches (mm)
7-1/4" (184) TDJ
4-1/4" x 7" (108 x 178)
8" (203) TDJ
9-1/4" (235) TDJ
6-1/4" x 9" (159 x 229)
10" (254) TDW
11-1/4" (286) TDJ
8" Diam. (203)
12" (305) TDW
10" Diam. (254) 14" (356) TDW

101
Dietrich04_102&103 3/22/04 3:31 AM Page 102
Next-generation TradeReady® Rim has preformed tabs at

standard spacings for rapid and easy
installation of TradeReady® Steel Joists.
TradeReady® Rim
■ Rims have preformed tabs at 12”, 16”, 19.2” or 24” intervals

that eliminate layout.
■ Preformed tabs are prepunched for easy, fast and accurate
fastener attachment.
■ Eliminates or drastically reduces support clips, joist hangers and web stiffeners.
■ Standard 16‘ lengths.
TradeReady® Rim
■ Sizes include 7-1/4”, 8”, 9-1/4”, 10”, 11-1/4”, 12” and 14”.
Dietrich™ TradeReady® rim is another major component of the TradeReady® steel floor
system. The rim is an integral part of the system and drastically reduces framing time and
effort. Rims have preformed attachment tabs at 12", 16", 19.2" or 24" O.C. spacing to
eliminate layout time. The tabs are also prepunched to ensure fast, accurate and proper
fastener placement. Embossed stiffening ribs on each side of the preformed tabs provide additional
reinforcement, resulting in a significant reduction of web stiffeners (squash blocks) and support clips in a majority
of applications. Once rims are installed, simply tilt up the floor joist, abut to the tab and screw attach.
U.S. Patent Nos. 6,301,854; 6,691,478; 6,418,694 and other patents pending.
TradeReady® Rim (TD Series™)
DMF Thickness Depth Flange Length Tab Spacing
Product Gauge Top Bottom
Inches (mm) Inches (mm)
Code (Mils) Inches (mm) Inches (mm)
7-1/4 184 1-1/4 31.8 2-1/2 63.5 12 305
8 203 1-1/4 31.8 2-1/2 63.5 12 305
18(43)
9-1/4 235 1-1/4 31.8 2-1/2 63.5 12 305
16(54)
TD12 10 254 1-1/4 31.8 2-1/2 63.5 12 305
14(68)
11-1/4 286 1-1/4 31.8 2-1/2 63.5 12 305
12(97)
12 305 1-1/4 31.8 2-1/2 63.5 12 305
14 356 1-1/4 31.8 2-1/2 63.5 12 305
7-1/4 184 1-1/4 31.8 2-1/2 63.5 16 406
8 203 1-1/4 31.8 2-1/2 63.5 16 406
18(43)
9-1/4 235 1-1/4 31.8 2-1/2 63.5 16 406
16(54)
TD16 10 254 1-1/4 31.8 2-1/2 63.5 16 406
14(68)
11-1/4 286 1-1/4 31.8 2-1/2 63.5 16 406
12(97)
12 305 1-1/4 31.8 2-1/2 63.5 16 406
14 356 1-1/4 31.8 2-1/2 63.5 16 406
7-1/4 184 1-1/4 31.8 2-1/2 63.5 19.2 488
8 203 1-1/4 31.8 2-1/2 63.5 19.2 488
18(43)
9-1/4 235 1-1/4 31.8 2-1/2 63.5 19.2 488
16(54)
TD19 10 254 1-1/4 31.8 2-1/2 63.5 19.2 488
14(68)
11-1/4 286 1-1/4 31.8 2-1/2 63.5 19.2 488
12(97)
12 305 1-1/4 31.8 2-1/2 63.5 19.2 488
14 356 1-1/4 31.8 2-1/2 63.5 19.2 488
7-1/4 184 1-1/4 31.8 2-1/2 63.5 24 610
8 203 1-1/4 31.8 2-1/2 63.5 24 610
18(43)
9-1/4 235 1-1/4 31.8 2-1/2 63.5 24 610
16(54)
TD24 10 254 1-1/4 31.8 2-1/2 63.5 24 610
14(68)
11-1/4 286 1-1/4 31.8 2-1/2 63.5 24 610
12(97)
12 305 1-1/4 31.8 2-1/2 63.5 24 610
14 356 1-1/4 31.8 2-1/2 63.5 24 610
TradeReady® Rim is only available in 16' stock lengths.
Dietrich04_102&103 3/22/04 3:32 AM Page 103
Precut structural blocking that installs easily

to the underside of the joists to prevent
joist rotation.
TradeReady® Structural Blocking (TDSB)

■ Precut to fit 12”, 16”, 19.2” or 24” spacing.
■ Prepunched holes for quick attachment.
■ Available in 18 gauge only.
Structural
Blocking
Dietrich™ TradeReady®‚ structural blocking is the third

component of the TradeReady® steel floor system. Structural
blocking is precut to fit securely between the underside of
the floor joists to prevent joist rotation. Structural blocking
is an economical alternative to cross bracing, X-bracing or
strapping. A continuous row of blocking should be installed
every 8' O.C. maximum and staggered for easy attachment.
Caution: In order to prevent joist rolling, the TDSB
blocking must be tied into the structure or otherwise braced
against lateral movement.
Note: TDSB blocking is not required if sheathing is applied
to the joists top and bottom.
TradeReady® Structural Blocking (TDSB)

DMF Thickness Depth Effective Length
Product Gauge (Mils) Inches (mm) Inches (mm)
Code
TDSB 18(43) 2-1/2 63.5 12 305
TDSB 18(43) 2-1/2 63.5 16 406
TDSB 18(43) 2-1/2 63.5 19.2 488
TDSB 18(43) 2-1/2 63.5 24 610

103
Dietrich04_104&105 3/22/04 3:34 AM Page 104
Block and strap bridging is used to prevent

joist rotation and lateral movement.
■ Install immediately after joists are erected
Block (TS/CS), Strap (DTN) and EasyClip™ (E- and S-Series™)
and before construction loads are applied.

■ Solid blocking is field cut from track or joist sections.
■ EasyClip™ E-Series™ Clips are used to attach blocks
to open side of C-joist.
■ EasyClip™ S-Series™ Clips are used to attach blocking Coil Strapping
to solid side of C-joist.
Dietrich™ block and
strap bridging is
installed to prevent
joist rotation and
lateral movement.
Solid blocking, a
field-cut track or
joist section, is
welded or screw-
attached between
the first and last
two outer joist bays
EasyClip™ EasyClip™ and at a maximum
S-Series ™
E-Series™
of 8' O.C. along
the strap, over all interior supports and adjacent to floor
openings. Two-inch wide corrosion resistant strapping
is also screw-attached or welded to the bottom of every
joist flange. Lateral support on the top flanges is usually
provided by sub floor or deck material.
Spacing of bridging must be calculated based on the
required strength. In general, bridging is installed at a
maximum of 8' O.C. spacing perpendicular to the joists.
For example, an 18' joist span would require two bridging
runs at 6' O.C. spacing.
Where the sub-floor or decking does not provide lateral support,
strap must also be installed on the top flange of the joist.
Diagonal Tension Strapping (DTN Series™/Strap)

DMF Thickness Size Length Packaging
Product Design Thickness Min. Width Max. Width
Gauge Mils ft. (m) Pcs./Skid
Code Inches (mm) Inches (mm) Inches (mm)
20 33 0.0346 0.879 2 50.8 12.0 304.8 10 3.05 250
18 43 0.0451 1.146 2 50.8 12.0 304.8 10 3.05 250
DTN3 16 54 0.0566 1.438 2 50.8 12.0 304.8 10 3.05 250
14 68 0.0713 1.811 2 50.8 12.0 304.8 10 3.05 250
12 97 0.1017 2.583 2 50.8 12.0 304.8 10 3.05 250
16 54 0.0566 1.438 2 50.8 12.0 304.8 10 3.05 250
DTN5 14 68 0.0713 1.811 2 50.8 12.0 304.8 10 3.05 250
12 97 0.1017 2.583 2 50.8 12.0 304.8 10 3.05 250
Dietrich04_104&105 3/22/04 3:35 AM Page 105

E543 16 54 0.0566 1.44 4 x 1-1/2 x 3 102 x 38.1 x 76.2 0.270 0.12 100
E545 16 54 0.0566 1.44 4 x 1-1/2 x 5 102 x 38.1 x 127 0.440 0.20 100
Block (TS/CS), Strap (DTN) and EasyClip™ (E- and S-Series™)

E547 16 54 0.0566 1.44 4 x 1-1/2 x 7 102 x 38.1 x 178 0.620 0.28 100
E549 16 54 0.0566 1.44 4 x 1-1/2 x 9 102 x 38.1 x 229 0.800 0.36 50
E541 16 54 0.0566 1.44 4 x 1-1/2 x 11 102 x 38.1 x 279 0.970 0.44 50
E683 14 68 0.0713 1.81 4 x 1-1/2 x 3 102 x 38.1 x 76.2 0.330 0.15 100
E685 14 68 0.0713 1.81 4 x 1-1/2 x 5 102 x 38.1 x 127 0.550 0.25 100
E687 14 68 0.0713 1.81 4 x 1-1/2 x 7 102 x 38.1 x 178 0.770 0.35 80
E689 14 68 0.0713 1.81 4 x 1-1/2 x 9 102 x 38.1 x 229 0.990 0.45 50
E681 14 68 0.0713 1.81 4 x 1-1/2 x 11 102 x 38.1 x 279 1.220 0.55 50
E973 12 97 0.1017 2.58 4 x 1-1/2 x 3 102 x 38.1 x 76.2 0.470 0.21 50
E975 12 97 0.1017 2.58 4 x 1-1/2 x 5 102 x 38.1 x 127 0.780 0.35 50
E977 12 97 0.1017 2.58 4 x 1-1/2 x 7 102 x 38.1 x 178 1.090 0.49 50
E979 12 97 0.1017 2.58 4 x 1-1/2 x 9 102 x 38.1 x 229 1.410 0.64 50
E971 12 97 0.1017 2.58 4 x 1-1/2 x 11 102 x 38.1 x 279 1.720 0.78 40

S543 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 3 38.1 x 38.1 x 76.2 0.140 0.064 400
S545 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 5 38.1 x 38.1 x 127 0.240 0.109 200
S547 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 7 38.1 x 38.1 x 178 0.340 0.154 100
S549 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 9 38.1 x 38.1 x 229 0.430 0.195 100
S541 16 54 0.0566 1.44 1-1/2 x 1-1/2 x 11 38.1 x 38.1 x 279 0.530 0.240 100
S683 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 3 38.1 x 38.1 x 76.2 0.180 0.082 200
S685 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 5 38.1 x 38.1 x 127 0.300 0.136 200
S687 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 7 38.1 x 38.1 x 178 0.420 0.191 100
S689 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 9 38.1 x 38.1 x 229 0.540 0.245 100
S681 14 68 0.0713 1.81 1-1/2 x 1-1/2 x 11 38.1 x 38.1 x 279 0.660 0.299 100
S973 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 3 38.1 x 38.1 x 76.2 0.260 0.118 200
S975 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 5 38.1 x 38.1 x 127 0.430 0.195 150
S977 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 7 38.1 x 38.1 x 178 0.600 0.272 100
S979 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 9 38.1 x 38.1 x 229 0.770 0.349 80
S971 12 97 0.1017 2.58 1-1/2 x 1-1/2 x 11 38.1 x 38.1 x 279 0.940 0.426 70
Diagonal Tension Strapping (DTN Series™/Coil)

DMF Thickness Size Packaging
Gauge Mils
Code Inches (mm) Inches (mm) Inches (mm) Skid
20 33 0.0346 0.879 2 50.8 12.0 304.8 1 coil
18 43 0.0451 1.146 2 50.8 12.0 304.8 1 coil
DTNC 16 54 0.0566 1.438 2 50.8 12.0 304.8 1 coil
14 68 0.0713 1.811 2 50.8 12.0 304.8 1 coil
12 97 0.1017 2.583 2 50.8 12.0 304.8 1 coil
20 and 18 gauge are 33,000 psi yield strength.
16, 14 and 12 gauge are 50,000 psi yield strength.

105
Dietrich04_106&107 3/22/04 3:37 AM Page 106
Provides excellent reinforcement at critical

load points to prevent web crippling.
■ One- or two-piece assemblies.
Web Stiffeners (WS) Web Stiffeners (WS2P)
■ Prevents web crippling.

■ Significantly enhances joist carrying capacity.
Dietrich™ one-
and two-piece
web stiffeners
are used to
provide
reinforcement
WS
of joist webs
to prevent
crippling. Web
reinforcement is
often required
by design to
enhance the WS2P Available for
load capacity Overnight
of joists. Delivery!
The two-piece
web stiffener
enables easier
installation when
positioned
between joist
flanges. The
parts are simply
rotated into
place, as
opposed to sliding them in from the end of the joist. A
single screw is used to attached the stiffener pieces to the
joist web. One half of the two-piece stiffener can be used
for lighter loads. When installing between the joist flanges,
the one-piece web stiffeners must be installed by sliding it
in from the end of the joist. As a result, the one-piece is
better suited for installation on the backside of the joist in
lieu of installation between the joist flanges. Web stiffeners
must be ordered to fit specific joist web dimensions.
Web Stiffeners (WS and WS2P)

DMF Thickness Size Length
Gauge Mils Inches (mm) Inches (mm)
Code Inches (mm)
WS 14 68 0.0713 1.81 4 102 5-3/4 to 11-3/4 146 to 299
WS2P 14 68 0.0713 1.81 4 102 5-3/4 to 11-3/4 146 to 299
*WS2P is a two-piece web stiffener system.
Dietrich04_106&107 3/22/04 3:38 AM Page 107
Used in lieu of block and strap to prevent flange

rotation and support flanges in compression.
■ Eliminates multiple components.
Simpson™ Tension Bracing (TB27) & TradeReady® Structural Blocking (TDSB)

■ Fits 1-5/8–3” flanges.
■ Available for 12”, 16”, 19.2” or 24” O.C. spacing.
Tension Bracing
Available for
Overnight
Delivery!
Simpson* tension bridging is used to prevent joist compression,

flange lateral movement, and rotation. These tension ties are
used as an alternative to traditional block and strapping. Tension
ties are traditionally used with wood framing, but can also be
used with conventional C-joists.
Spacing of tension bridging must be calculated based on needed
strength. In general, bridging is installed at 8' o.c. maximum.
* Simpson is a trademark of Simpson Strong-Tie Company, Inc.
Precut structural blocking provides a quick and

efficient method to prevent joist rotation.
■ Economical alternative to strapping, x-bracing or tension bridging.
■ Precut to fit 12”, 16”, 19.2” or 24” spacing.
■ Prepunched holes for quick attachment.
■ Available in 18 gauge.
Structural
Dietrich™ TradeReady® structural blocking is precut to fit securely between the Blocking
underside of floor joists to prevent joist rotation. The structural blocking is an
economical alternative to cross bracing, x-bracing or strapping. A continuous row of blocking
should be installed every 8' O.C. maximum and staggered for easy attachment.
Caution, in order to prevent joist rolling, the TDSB blocking must be tied into the structure
or otherwise braced against lateral movement.
TradeReady® Structural Blocking

DMF Thickness Depth Effective Length
Product Gauge (mils) Inches (mm) Inches (mm)
Code
TDSB 18 (43) 2 1/2 63.5 12 305
TDSB 18 (43) 2 1/2 63.5 16 406
TDSB 18 (43) 2 1/2 63.5 19.2 488
TDSB 18 (43) 2 1/2 63.5 24 610

107
Dietrich04_108&109 3/22/04 3:41 AM Page 108
This premier joist hanger

features “one size fits all”
flexibility and accommodates
8"–14" deep floor joists.
Simpson™ (SJCT) 8–14 Hanger
■ One size fits all. Eliminates numerous SKUs.

■ Field skewable up to 45˚.
■ Joists can be attached from either side or doubled up.
SJCT
The Simpson* (S/ JCT) joist hanger provides maximum

installation flexibility. This universal hanger can be used for
8"–14" deep wood or steel framing members. The hanger
is easily field skewable and can accommodate up to 45˚
attachments. Floor joists can be attached from either side
or easily doubled up.
Each hanger is prepunched with various shaped holes for
fast, easy and accurate fastener placement. Round holes
are used for minimum loads, and both round and triangle
holes are used for maximum loads.
The SJCT joist hanger is typically used to hang joists from
wood, glue-lams, light-gauge steel or structural steel I-beams.
Available for
Overnight
Delivery!
Simpson™ (SJCT 8-14) Hanger

DMF Thickness Weight/Piece Packaging
Simpson
Reference Gauge Mils lbs. (kg) Pcs./Box
Code Inches (mm)
SJCT S/JCT8-14 14 68 0.0713 1.81 0.600 0.271 50
Dietrich04_108&109 3/22/04 3:42 AM Page 109
Floor Joist Hangers and Connectors
Traditional hanger used to attach floor

joists to structural steel beams.
■ Use with 2” flange (CSW) floor joists.
Simpson™ Bridle Hanger (SLBV/SMB)(JH2)

■ Single-and double-wide hangers.
■ Stock sizes for 8”, 10”, 12” and 14”
deep joists.
■ Other widths and depths available.
Simpson* bridle hangers are commonly used to attach Available for

light-gauge C-joists to structural steel beams. Bridle Overnight
hangers are easily attached with welds. Delivery!
Bridle Hanger
Photo illustrates SJCT Hanger. Bridle Hanger is an acceptable alternative.

Bridle Hanger
DMF Thickness Depth Width Weight/piece Packaging
Gauge Mils Inches (mm) Inches (mm) lbs. (kg)
Code Inches (mm) box
8 203 2 50.8 1.00 0.45 25
SLBV 14 68 0.0713 1.81 10 254 2 50.8 1.25 0.57 25
12 305 2 50.8 1.50 0.68 25
14 356 2 50.8 2.00 0.90 25
8 203 2 50.8 2.00 0.90 25
SMB 12 97 0.1017 2.58 10 254 2 50.8 2.25 1.02 25
12 305 2 50.8 2.50 1.13 25
14 356 2 50.8 4.00 1.81 25
Double-wide hangers available on request.
∆ Other style hangers including JH2 are available.

109
Dietrich04_110&111 3/22/04 3:44 AM Page 110
This specialty hanger provides

a quick, easy and versatile method
for attaching steel rim joists
to insulated concrete forms.
Simpson™ Ledger Connector System (ICFL)
■ Cost-effective connector used in ICF construction.

■ Anchors securely within the concrete.
The Simpson* ledger connector

system is engineered to solve the
challenges of mounting steel or
wood ledgers to insulated concrete Ledger Connector
form (ICF) walls. Simpson’s Ledger
Connector System is easy, quick
and versatile to use. The
perforations in the embedded leg
of the ICFL permit the concrete to
flow around it, anchoring the ICFL
securely within the concrete. The
exposed flange provides a
structural surface for mounting
either a wood or steel ledger.
Available for
Overnight
Delivery!
Simpson™ Ledger Connector System (ICFL)

DMF Thickness Weight/Piece Packaging
Code Inches (mm) box
ICFL 14 68 0.0713 1.81 1.81 0.82 40
Dietrich04_110&111 3/22/04 3:46 AM Page 111
Skewable utility angle used for rigid and

off-angle attachments of joists to joists
or other structural steel members.
Simpson™ Skewable Angle Hangers (SLS5/SLS7)

■ Adjustable from 0 to 135°.
■ Bend one time only.
■ Available in 18 gauge. SLS7
■ ICBO ER 5275 Recognized.

Simpson* SLS5/SLS7 skewable utility angles
are used to make rigid attachments of joist-
to-joist or joist-to-other-miscellaneous
framing. This clip is ideal for making off-angle
attachments. It is easily field bent from 0˚ to
Available for
135˚.
Overnight CAUTION: This clip can only be bent one SLS5
Delivery! time.
Simpson™ Skewable Angle Hangers (SLS5/SLS7)

SLS5 18 43 0.0451 1.15 4-7/8 124 0.300 0.136 100
SLS7 18 43 0.0451 1.15 6-3/8 162 0.400 0.181 100

111
Dietrich04_112&113 3/22/04 3:48 AM Page 112
The LTP4 Lateral Tie Plate transfers

shear forces from the joists rim or
blocking to the sill plate.
Lateral Tie Plate (LTP4)
■ Prepunched holes for connection accuracy.

■ ICBO ER 5670 Recognized.
The Simpson* LTP4 Lateral Tie
Plate transfers shear forces from
the joist rim or blocking to the sill
plate. Nail holes are spaced to
prevent wood splitting for single
and double top plate applications. Lateral Tie Plate
May be installed over plywood
sheathing.
Available for
Overnight
Delivery!
Lateral Tie Plate (LTP4)

DMF Thickness Height Width Weight/Piece Packaging
Gauge Mils Inches (mm) Width (mm) lbs. (kg)
LTP4 20 33 0.0346 0.88 3 76.2 4-1/4 108 0.110 0.050 200
Dietrich04_112&113 3/22/04 3:50 AM Page 113
Used to secure TradeReady® Rim Joist,

structural track, end caps or parallel
joists to the building foundation.
Foundation Clips (FDCL)

■ Prepunched for easy and accurate fastener placement.
■ Elongated slot provides for adjustable attachment
to the foundation anchor bolts.
Dietrich™ Foundation clips are used

to provide a strong, rigid attachment
of TradeReady® rim joist or
conventional structural track to the Foundation Clip
building foundation. Foundation
clips are secured to the foundation
using the elongated slots, and
anchor bolts. The prepunched leg is
screw attached to the face or web of
the joist. Clip spacing is based on Available for
loading requirements. Overnight
Delivery!
Foundation Clips (FDCL)

DMF Thickness Width Height Length Weight/Piece Packaging
Gauge Mils Inches (mm) Inches (mm) Inches (mm) lbs. (kg)
FDCL 16 54 0.0566 1.44 5 127 5-1/2 140 5 127 0.900 0.407 80

113
Dietrich04_114 3/22/04 3:53 AM Page 114
There is no
substitute for 103
Deluxe® corner
bead, it’s all my
applicators will
use.
— Phil Geltzer
Atlantic Coast
Drywall
Little Silver, NJ
Private residence of Marc LaCerte, M&R Drywall
Our crews love the TradeReady® Floor

System because it’s so fast to install.
Faster installation means more profit to
our bottom line.
— Michael Eilers
E&K
Denver, CO
Major project managers select the best

products to satisfy current code
requirements, while ensuring a cost-
effective installation. Sliptrack® slotted
deflection track is the product of choice
at the top of walls.
Private residence of Marc LaCerte, M&R Drywall
Light-Gauge Metal Trusses

Prefabricated/Factory-Assembled
Metal Trusses ..............................118-119
C-Truss ....................................................120
Simpson™ Seismic and Hurricane
Ties (SH-Series) ..................................120
115
Advantages
TRUSS Light-gauge steel trusses offer many advantages
FRAMING over traditional roof framing components. Because
of steel’s incredible strength, light-gauge trusses
OVERVIEW can be designed for clear spans over 100'. They can
Truss Framing Overview
eliminate intermediate bearing walls and create

Light-gauge steel trusses are an eco- large open spaces. Steel trusses not only span far-
nomical, lightweight rigid roof fram- ther, they permit wider on-center spacing that
ing system used in educational, results in additional labor and material savings.
assisted living, hotels/motels, military,
One of steel’s greatest benefits is noncombustibil-
industrial and countless other com-
ity. Steel will not burn, and does not add fuel to a burning fire. Steel trusses are fully non-
mercial and institutional structures
combustible and meet even the most stringent fire codes. In many cases they reduce
when a “residential look and feel” is
insurance premiums and possibly eliminate expensive sprinkler systems.
desired. Steel trusses are also used in
residential roof and floor assemblies. In general, steel provides straighter, tighter and truer framing, resulting in better, long
They provide fully noncombustible term performance. Steel isn’t susceptible to rot, insects or mold. It doesn’t warp, twist,
assemblies that meet required fire bow, shrink or swell like its wood counterpart. Ceilings remain flat, even and virtually
codes. They are the ideal, cost-effec- free from unsightly cracks and “nail pops.”
tive alternative to structural steel,
bar joist and fire-retardant wood Light-gauge trusses can be field assembled using conventional C-studs, or they can be
trusses. Steel trusses are compatible prefabricated in controlled factory environments and delivered directly to your jobsite.
with almost every construction type, Prefabricated trusses offer many advantages over field assembled trusses including
method or system including light- shorter construction cycles, higher quality and consistency.
gauge steel, structural steel, CMU,
concrete and wood framing. Metal Truss Fabrication Options
Light-gauge steel trusses have the Dietrich Metal Framing provides a number of light-
design flexibility to accommodate gauge metal truss options to meet your specific
almost any roof line including com- requirements, including prefabricated or field-
plex roof geometries. Some of the assembled C-stud trusses.
more common truss styles include
Aegis Metal Framing, our joint venture company
fink, fan, pratt, king, flat, gable, hip,
with Mitek, provides pre-engineered, prefabricat-
mansard, mono, cantilever, over-
ed and UL* rated trusses that are delivered to your
hang and scissor trusses. Light-gauge
site ready for installation. The Aegis** national
components can also be assembled to
fabrication network uses state-of-the-art Aegis™
provide open web floor trusses.
software to accurately bid and fabricate a complete truss system. Aegis™ fabricators also
provide sealed truss design drawings. Depending on the job requirements, your Aegis™
*UL is a trademark of Underwriters
fabricator can also provide certified permanent bracing and connection design. Many
Laboratories, Inc. Aegis™ fabricators can also provide truss installation.
**Aegis is a trademark and tradename
of Aegis Metal Framing, LLC. C-stud field-cut and field-assembled trusses provide another option for light-gauge
trusses. C-stud assemblies require independent design drawings by engineering compa-
nies like Dietrich Design Group. Dietrich Design Group can also provide fabrication
drawings for an additional fee.
Overview
Light-Gauge Metal Truss Types

Pitched or common truss is characterized by its triangular shape
and is most often used in roof construction.
Truss Framing Overview

Flat or parallel chord truss is most often used in floor or flat roof construction.
Top Chord-Bearing Bottom Chord-Bearing

Floor Truss With Chase Floor Or Roof Truss
(can design with a chase as well)
Other Types Of Trusses Include:
Scissors
Polynesian Celestory
Vaulted Parallel Chord

Gambrel Cantilevered Mansard
w/Parapets
Vault
Hip
Room-In-Attic
Flat Vault
Dual Pitch
Bowstring
Studio Vault
Mono
Tray Or Coffer Double Cantilever

Half
Scissors
Half Hip
Barrel Vault Tri-Bearing

Sloping
Flat
Multi Piece Double Inverted

117
Dietrich04_118&119 3/22/04 3:55 AM Page 118
AEGIS* prefabricated trusses are

pre-engineered, UL™ classified,
factory-assembled framing
systems shipped to the jobsite.
Prefabricated/Factory-Assembled Metal Trusses
■ AEGIS™ fabricators do all the work from

estimating, designing, assembly and delivery.
■ Pre-engineered and prefabricated by truss
professionals.
■ Greatly reduces construction time.
■ UL** classified assemblies.
■ Nationwide fabrication network.
■ Limitless designs
and possibilities.
The remarkable Ultra-Span*** light-gauge Computer designed for precision and factory built for quality
steel truss system from AEGIS offers the and consistency, prefabricated Ultra-Span® trusses are the
safest, most cost-effective way to put ideal, cost-effective alternative to structural steel, bar joist, fire-
completely non-combustible sloped roofs treated wood and site-assembled cold-formed metal framing.
on commercial structures. Our nationwide
network of fabricators can provide a fully AEGIS Metal Framing, LLC, is a joint venture between the
engineered, pre-fabricated, UL™ classified*, light-gauge world’s largest producer of metal framing products and
system for almost any roof you can imagine. accessories (Dietrich) and the world’s leading provider of
products, software and engineering services for the pre-
When specifying and purchasing light-gauge steel trusses fabricated building components industry (Mitek). The AEGIS
for your next commercial/institutional project, be sure to mission is to dramatically increase the use of computer
insist on the most comprehensive system available today. designed, factory-built light-gauge metal roof, floor and wall
The Ultra-Span® System from AEGIS Metal Framing offers framing systems in commercial, institutional and residential
building designers and contractors real peace of mind that construction.
comes from knowing all the key elements of a properly
functioning structural system are designed and provided for. Contact your local AEGIS™ fabricator or AEGIS Metal
Framing for more information on the comprehensive
When you select an authorized Ultra-Span® fabricator to Ultra-Span® system!
design and manufacture your prefabricated truss system,
you are selecting an experienced truss specialist. Utilizing
the state-of-the-art AEGIS™ suite of software, an Ultra-Span®
fabricator can efficiently and accurately bid a complete
truss system that can include all the following items:
• All the trusses, including girders, valleys and
specials.
• Truss-to-truss and truss-to-bearing connections.
• Special connections.
• Truss bracing and installation bracing products.
• Permanent bracing.
• Hip, ridge and valley plates.
*Aegis is a trademark and trade name of Aegis Metal Framing, LLC

**UL™ and UL Classified are trademarks of Underwriters Laboratories, Inc.
***Ultra-Span is a registered trademark of Aegis Metal Framing, LLC
Dietrich04_118&119 3/22/04 3:56 AM Page 119
Light-Gauge Metal Trusses
USJ
Prefabricated/Factory-Assembled Metal Trusses

USC
USW

119
Dietrich04_120 3/22/04 3:58 AM Page 120
C-Stud components are field cut

and assembled to provide
noncombustible roof
assemblies.
C-Truss & Simpson™ Seismic and Hurricane Ties (SH-Series)
■ Standard framing components.

■ Noncombustible assembly. C-Stud Truss
■ Lightweight and easy to handle.
■ Clear spans up to 100’.
■ Limitless designs and possibilities.
C-Stud/field-assembled metal trusses

are lightweight, economical roof
framing systems used in educational,
assisted living, hotels/motels, military,
industrial and countless other
commercial and institutional Gusset Plates
structures when a “residential look
and feel” is desired. Steel trusses are Typically, field-assembled C-stud roof assemblies are
also used in residential roof and floor designed by Dietrich Design Group or another qualified
assemblies. They are the ideal, cost- light-gauge design company. Trusses are fabricated
effective alternative to structural steel, onsite using conventional C-studs. C-studs are used for
bar joist and fire-retardant wood both top and bottom cords as well as web members.
trusses. Steel trusses are compatible Members are secured back to back using screws or
with almost every construction type, welds. When C-studs are used in truss applications, they
method or system including light- should be ordered as unpunched. Care must be taken to
gauge steel, structural steel, CMU, insure proper bracing and connections.
concrete and wood framing.
Used to attach and tie

trusses and rafters
to the building structure. SH2 SH3
■ Prepunched for fast and accurate fastener placement.

■ Ties are shipped in equal quantities
of separate rights and lefts.
■ Simpson* recognized quality.
Simpson™ Seismic and Hurricane Ties are designed to
provide wind and seismic ties for trusses and rafters. These
versatile products can also be used for general tie-down
purposes, strong back attachments and as all-purpose ties
where one member crosses another.
*Simpson is a trademark of Simpson Strong - Tie Company, Inc.
Shaftwall/Stairwell
Shaftwall/Stairwell 2-Hour
Fire-Rated Assemblies
CT Stud (CT) ........................................124
Shaftwall/Stairwell 2 Hour
Fire-Rated Assemblies
J-Runner (TT) ......................................125
Area-Separation Wall
H-Stud Area-Separation Wall
System H-Runner/
C-Runner (HR) ....................................126
H-Stud Area-Separation Wall
System H Stud (HS) ..........................127
Aluminum Breakaway Clips (AB)..127
Head of Wall
SLP-TRK® Slotted Track (BDTK)......128
Photo courtesy of BPB America
121
Cavity Shaftwall
FIRE-RATED Cavity shaftwall systems are nonload-bearing fire
ASSEMBLIES rated wall assemblies that provide critical, life
safety, fire-resistant protection for elevator
OVERVIEW shafts, stairwells, vertical chases and mechanical
Fire-Rated Assemblies Overview
enclosures. Shaftwalls in elevators and stairwells

Fire-rated assemblies provide critical, are one of the most important wall assemblies in
life safety fire-resistant protection in a a building. They provide the only means of
variety of wall assemblies in many dif- human egress from the building in an emer-
ferent building types. These assemblies gency. Vertical chases and mechanical enclosures
can be constructed from a myriad of dif- Photo courtesy of BPB AMERICA keep vital communication, power, water, fresh air
ferent building materials. Some of the and exhaust systems intact when a fire occurs.
most common include masonry and a
combination of steel and gypsum. Cavity shaftwalls are constructed utilizing one of
two methods: masonry/CMU or light-gauge steel
Steel and gypsum assemblies have and gypsum. Gypsum drywall shaft construction
become the preferred and most widely has become the preferred and most widely used
used fire-rated assemblies. They are shaftwall assembly. These shafts are lightweight,
lightweight, low-cost, high-performance install faster, and provide lower in-place costs.
systems that significantly reduce overall They also significantly reduce structural framing
building weight and construction time. and foundation costs. Masonry shafts in high-rise
Two of the most common fire-rated buildings historically weigh between 20 and 45
assemblies are Area Separation Walls
lbs. per square foot compared to gypsum assem-
and Cavity Shaftwalls.
blies that weigh between 10 and 13 lbs. per
Area Separation Walls are typically used square foot.
to provide two-hour fire-rated protec-
tion between adjacent living units in In addition to substantial weight reduction, gypsum shaft assemblies can be installed
apartment buildings, condominiums, from the exterior of the shaft at each floor, eliminating the need for scaffolding. Shaft
townhouses and multifamily construc- installation is easy, quick and clean. Light-gauge steel and gypsum assemblies provide
tion. Cavity Shaftwalls are commonly fast, lightweight, low-cost and high-performance assemblies.
used to provide fire-resistant protection
for elevator shafts, stairwells, vertical
chases and mechanical enclosures in
most multi-story structures. Cavity
shaftwall systems are widely used in low-
rise, mid-rise and high-rise buildings.
Photo courtesy of National Gypsum
Dietrich Metal Framing provides fully
tested and approved assemblies for both
area separation wall and cavity shaft-
wall construction. What makes the
Dietrich™ system unique is that it has
been tested with almost every gypsum
board and shaft liner manufacturer in
the country. Unlike competing systems,
the Dietrich™ CT Cavity Shaftwall and
H-Stud Systems provide maximum flexi-
bility to choose from a variety of board
manufacturers. Other systems are only
tested with one company.
This unprecedented flexibility means
quick availability of product at econom-
ical costs. It provides you with a choice
and piece of mind knowing you’re using
a tested and approved assembly.
Overview
Area SLP-TRK* Slotted Track

Separation It’s a real challenge these days meeting head-of-wall codes
Wall for fire stop and life safety while maintaining the ability to
absorb vertical movement in high-rise buildings. SLP-TRK®
Area Separation Walls slotted track is the solution. SLP-TRK® slotted track provides
Fire-Rated Assemblies Overview

are nonload-bearing 2- a positive attachment for wall strength and allows for verti-
hour rated vertical wall cal movement.
assemblies that provide
fire-resistant protection SLP-TRK® Systems comply with the toughest fire code
between adjacent living requirements in the country, if not the world. It has been
units in apartment tested with a variety of leading fire-stop products, and has
buildings, condominiums and townhouses. Area Separation outperformed the requirements of stringent fire and hose
Walls are also referred to as party walls, firewalls, multi-fam- stream testing ASTM E-119, ASTM E-814. SLP-TRK® slotted
ily walls and H-Stud assemblies. track also has met and exceeded the latest seismic cycling
standards found in UL2079 and ASTM 1966. SLP-TRK® cur-
Area Separation Walls are assembled between two independ- rently has over 100 UL™ listings.
ent walls to form a commonly shared party wall that extends
from the foundation through the roofline. The walls are
assembled with two 1" thick gypsum panel liners vertically
installed between 2" H-studs spaced 24" O.C. C-runners or
H-tracks are installed at the top and bottom of the walls and
back-to-back between vertically stacked panels. Overall “Dietrich’s shaftwall system
stacked area separation wall assembly cannot exceed 50'.
gives me the flexibility
Aluminum Breakaway Clips are used to secure the area sep-
aration wall in place to both sides of the floor, roof and truss to choose from a variety
line. The clips on the fire side are intended to melt under
the intense heat during a fire, thus enabling a fire-damaged of gypsum companies,
structure to collapse while keeping the fire wall barrier in
place to protect the adjacent unit. This is commonly which means more profit
referred to as a “controlled collapse.”
to my bottom line.”
Area separation wall assemblies are a great alternative to
masonry construction. The H-stud system is at least 50% — Brad Bryant, Baker Drywall
lighter than masonry walls, installs faster, is STC sound rated Dallas, TX
and increases valuable floor space compared to 8" – 12"
wide masonry walls.
* SLP-TRK® is a registered trademark of Sliptrack Systems, Inc.

123
Dietrich04_124&125 3/22/04 4:01 AM Page 124
CT Cavity Shaftwall Studs are used to provide

high-performance fire-rated elevator,
stairwell, chase and mechanical shafts.
Shaftwall/Stairwell 2-Hour Fire-Rated Assemblies CT Stud (CT)
■ Fire-rated assemblies.
■ Available in 2-1/2”, 4” and 6” wide and in 25 and 20 gauge.
■ Slotted webs to reduce thermal and noise transmission.
■ Engineered to maintain shaftwall integrity.
CT Stud
■ Prepunched for horizontal service lines.
■ Fully tested with most major gypsum manufacturers.
■ NER 506 approved.
Dietrich™ CT Cavity Shaftwall Studs are rigid high-

performance members engineered to maintain shaftwall
integrity. CT studs are available in 2-1/2", 4" and 6" wide
members. CT studs are punched with 1" circular knockouts
at 12" O.C. for easy installation of conduit or other
mechanical service lines.
A unique feature of the CT stud is the slotting in the
web of the stud. Independent laboratory tests have
demonstrated that these slots improved resistance
to thermal and noise transmissions effectively.
CT studs are designed for use with 1" thick Gypsum Liner
Panels. CT studs are friction-fitted between top and bottom
J tracks. Gypsum liner panels are inserted into the stud
flanges. The flanges provide an airtight friction fit along
the length of the panel that eliminates rattling. Studs are
automatically spaced 24" O.C. maximum once 1" shaft liner
panels are friction-fit into place. The system is finished with
one or two layer(s) of gypsum board to complete and
achieve the designated fire rating.
Dietrich™ CT Cavity Shaftwall System is approved with the
following manufacturers:
United States Gypsum; James Hardie; BPB America;
National Gypsum; American; Eagle; Georgia-Pacific;
Standard; Lafarge Gypsum; Temple; PABCO
CT Studs
Product Design Thickness Width Pcs./ Pcs./
Code Inches (mm) Inches (mm) Bundle Skid
CTN2 2-1/2 63.5 0.590 0.267 210
CTN4 25 23 0.023 0.58 4 102 0.720 0.326 160
CTN6 6 152 0.890 0.403 Not 84
CTE2 2-1/2 63.5 0.860 0.389 Bundled 210
CTE4 20 40 0.040 1.02 4 102 1.040 0.471 160
CTE6 6 152 1.280 0.579 84
Dietrich04_124&125 3/22/04 4:02 AM Page 125
Shaftwall/Stairwell
Universal tabbed track secures

CT studs and gypsum shaftliner panels
in shaftwall assemblies.
Shaftwall/Stairwell 2-Hour Fire-Rated Assemblies J-Runner (TT)

■ Punched tabs to secure panels in vertical
and closure details.
■ Available in 2-1/2”, 4”, and 6” widths
and in 25 and 20 gauge. J-Tabbed Track
■ Designed for multiple uses.

■ Standard 10’ length. Custom lengths available.
■ Fully tested and approved/NER 506.
Dietrich™ J-tabbed track is used at the floor and ceiling in

shaftwall assemblies. CT studs and gypsum shaftliner panels
are friction fit between the top and bottom J-runner.
J-Runners have unequal legs. The longer leg (available in
2-1/4" and 3") is installed with the longer leg against the
shaft. The leg provides a backstop for easy installation of the
shaftliner. Three-inch leg track is typically used as jamb struts
around closure details, including duct and door openings,
abutments and intersections.
Dietrich™ J-tabbed track is punched with fold-up tabs every
12". The tabs are easily folded upward to secure gypsum
panel liners in closure details. These tabs reduce framing
components compared to other competing assemblies and
permit faster and more-efficient installation.
Tabbed Track/J-Runner (TT)

Product Design Thickness Width Pcs./ Pcs./
Code Inches (mm) Inches (mm) Bundle Skid
2-1/4" 0.480 0.217 180
2-1/2"
3" 0.550 0.249 180
2-1/4" 0.610 0.276 144
TTN (2,3)* 25 23 0.023 0.58 4"
3" 0.680 0.308 144
2-1/4" 0.780 0.353 108
6"
3" 0.850 0.385 Not 108
2-1/4" 0.690 0.312 Bundled 180
2-1/2"
3" 0.880 0.398 180
2-1/4" 0.860 0.389 144
TTE (2,3)* 20 40 0.040 1.02 4"
3" 1.080 0.489 144
2-1/4" 1.130 0.511 108
6"
3" 1.360 0.615 108
*2 designates 2-1/4" leg.
*3 designates 3" leg.

125
Dietrich04_126&127 3/22/04 4:03 AM Page 126
C-Runner or H-Track is used at the top

and bottom of vertical panels to secure
shaftliner panels and H-Studs in
area-separation wall assemblies.
H-Stud Area-Separation Wall System H-Runner/C-Runner (HR)
■ 2-hour fire-rated assembly.

■ 2” wide and 25 gauge.
■ Tested and approved with most major gypsum
and shaftliner manufacturers.
■ Standard 10’ stock length.
■ BOCA approved—Evaluation Report 92-19. H-Track
Dietrich™ C-runner or H-track is used to secure H-stud and

gypsum shaftliner panels in area-separation wall assemblies.
C-runner is attached to the foundation with power-driven
fasteners. C-runner is also used as top track to cap the
H-stud and gypsum shaftliner panels. A second track is then
screwed back to back, to the lower runner, to hold the next
level of the area-separation wall assembly. Area-Separation
Wall assemblies are limited to 50' in height (maximum).
Although this was a tragic event, it clearly proves the effectiveness

of the area separation wall system. The system performed as
designed by maintaining the integrity of the fire wall protecting
the lives and property of the adjacent units.
Photo courtesy of National Gypsum
C-Runner
Product Design Thickness Width Length Pcs./ Pcs./
Code Inches (mm) Inches (mm) ft. (m) Bundle Skid
HRN1 8 2.4 0.270 0.122 560
25 18 0.0188 0.48 2-1/8 54.0 NA
(C-Runner) 10 3.0 0.270 0.122 560
Dietrich04_126&127 3/22/04 4:05 AM Page 127
Area-Separation Wall
H-Studs are a key framing

component and add structural
integrity to area-separation
wall assemblies.
H-Stud Area-Separation Wall System H-Stud (HS) & Aluminum Breakaway Clips (AB)
■ 2-hour fire-rated
assembly. H-Stud
■ 2” wide and
25 gauge. Dietrich H-Studs are 2" wide vertical
members used to secure two 1" thick
■ Tested and
approved with pieces of gypsum shaftliner in area
most major gypsum separation wall assemblies. H-studs are
and shaftliner inserted into C-runners and slid over
manufacturers. gypsum panel liner edges. The process is
■ Stock lengths are repeated until the desired wall length is
8’, 10’ and 12’. achieved. Once the wall is plumbed it is
secured at the floor, roof and truss line with
■ BOCA approved. aluminum breakaway clips. Wall assemblies
Evaluation Report
92-19. may be built to heights of 10' between
floors and stacked to a total maximum
height of 50'.
H-Stud
Product Design Thickness Width Length Pcs./ Pcs./
Code Inches (mm) Inches (mm) ft. (m) Bundle Skid
8 2.44 0.44 0.20 300
HSN
25 18 0.0188 0.48 2-1/16 52.4 10 3.05 0.44 0.20 NA 300
(H-Stud)
12 3.66 0.44 0.20 300
Clips melt away under intense heat,

allowing a fire-damaged structure to
collapse while keeping the firewall barrier
in place to protect the adjacent units.
■ Tested and approved with most major gypsum and shaftliner manufacturers.
■ BOCA approved. Evaluation Report 92-19.
■ Clips measure 2” x 2” x 2-1/2”.
Dietrich™ aluminum breakaway clips are used as part of the Should a fire break out in one unit, the Aluminum Breakaway
H-Stud area-separation wall assembly and are designed to Clips on the fire-ridden side of the area separation wall will
melt and break away when exposed to fire. The clips are melt, allowing the wall structure for that side to collapse.
used to hold the area-separation wall assembly in place at the The breakaway clips on the non-fire side will remain intact
floor roof and truss line between adjacent units. and hold the area-separation wall in place as a barrier to
contain the fire to the unit of origin.
Aluminum Breakaway Clips
DMF Size Weight/Box Packaging
Product Inches (mm) lbs. (kg) Pcs./Box
Code
AB 2" x 2" x 2-1/2" 50.8 x 50.8 x 63.5 0.05 0.02 500

127
Dietrich04_128 3/22/04 4:06 AM Page 128

■ Positive attachment that allows up to 1” of vertical movement.
■ Meets BOCA, SBCCI, ASTM, UL2079, IBC

■ UL™** approved 1- and 2-hour systems.
■ Single-track assembly.
It’s a real challenge these SLP-TRK*
days meeting head-of-wall U.S. Patent No. 5,127,760
codes for fire stop and life
safety while maintaining
the ability to absorb SLP-TRK® Systems — Fire-Rated Assemblies
vertical movement in System 1-6 Warnok Hersey/ITS ICBO ESER-5344
low-, mid-, and high-rise System 1 – W.R. Grace System 3 – Isolatek System 5 – Isolatek
WHI-495-PSV-1201 WHI-495-PSV-1333 WHI-495-PSV-1333
buildings. SLP-TRK® slotted System 2 – W.R. Grace System 4 – Isolatek System 6 – W.R. Grace
track is the solution. WHI-495-PSV-1333 WHI-495-PSV-1334 WHI-495-PSV-1338
SLP-TRK® slotted track provides a positive attachment for System 7 System 9 System 12 System 15
STI 3M Rectorseal Tremco
wall strength and allows for vertical movement. Movement UL-HW-D-0003 UL-HW-D-0020 UL-HW-D-0032 UL-HW-D-0016
caused by normal head-of-wall and floor extension or UL-HW-D-0034 UL-HW-D-0021 UL-HW-D-0033 UL-HW-D-0091
UL-HW-D-0043 UL-HW-D-0029 UL-HW-D-0058 UL-HW-D-0255
compression is absorbed by SLP-TRK® slotted track to UL-HW-D-0044 UL-HW-D-0031 UL-HW-D-0059 UL-HW-D-0256
prevent damage to the wall assembly. UL-HW-D-0054 UL-HW-D-0101 UL-HW-D-0104 UL-HW-D-0291
UL-HW-D-0079 UL-HW-D-0111 UL-HW-D-0105 System 16
SLP-TRK® slotted track smoothly integrates with a variety of UL-HW-D-0088 UL-HW-D-0134 UL-HW-D-0127 JohnWagner
UL-HW-D-0099 UL-HW-D-0170 UL-HW-D-0128 Assoc.
wall-installation systems and is extremely user-friendly as UL-HW-D-0102 UL-HW-D-0173 UL-HW-D-0129 UL-HW-D-0353
well as economical. The simple design and easy installation UL-HW-D-0136 UL-HW-D-0205 UL-HW-D-0130 UL-HW-D-0356
reduces the cost of materials and labor. UL-HW-D-0137 UL-HW-D-0265 UL-HW-D-0179 UL-HW-D-0357
UL-HW-D-0152 System 10 UL-HW-D-0180 UL-HW-D-0358
SLP-TRK® systems comply with the toughest code UL-HW-D-0153 HILTI UL-HW-D-0221 UL-HW-D-0368
requirements in the country, if not the world. They have UL-HW-D-0210 UL-HW-D-0045 UL-HW-D-0297 System 17
been tested with a variety of leading fire-stop products, UL-HW-D-0241 UL-HW-D-0046 UL-HW-D-0298 A/D Fire
UL-HW-D-0242 UL-HW-D-0049 System 13 Protection
and have outperformed the requirements of stringent fire UL-HW-D-0243 UL-HW-D-0076 GRACE- Systems
and hose stream tests ASTM E-119, ASTM E-814. SLP-TRK UL-HW-D-0260 UL-HW-D-0077 Flamesafe UL-HW-D-0247
also has met and exceeded the latest seismic cycling UL-HW-D-0365 UL-HW-D-0083 UL-HW-D-0108 UL-HW-D-0314
standards found in UL2079 and ASTM 1966. UL-HW-D-0371 UL-HW-D-0084 UL-HW-D-0124 UL-HW-D-0315
System 8 UL-HW-D-0085 UL-HW-D-0144 UL-HW-D-0316
Meeting Code Requirements PFPP UL-HW-D-0087 UL-HW-D-0146 UL-HW-D-0317
SLP-TRK® slotted track has achieved the following building UL-HW-D-0025 UL-HW-D-0106 UL-HW-D-0148 System 18
code approvals: UL-HW-D-0036 UL-HW-D-0154 UL-HW-D-0165 OSI Sealants Inc.
ICBO-ER 5344 UL-HW-D-0063 UL-HW-D-0190 UL-HW-D-0217 UL-HW-D-0341
UL-HW-D-0071 UL-HW-D-0218 UL-HW-D-0219 System 19
UL Classified R19236 UL-HW-D-0072 UL-HW-D-0259 UL-HW-D-0257 USG
UL Certified for Canada XHL17 UL-HW-D-0073 UL-HW-D-0313 UL-HW-D-0299 UL-HW-D-0160
UL-HW-D-0162 UL-HW-D-0321 System 14
LA City RR25344 UL-HW-D-0185 UL-HW-D-0322 EGS Nelson
OSHPD R#0371 UL-HW-D-0191 UL-HW-D-0324 UL-HW-D-0223
UL-HW-D-0271 System 11 UL-HW-D-0224
NY City MEA 285-01-M UL-HW-D-0272 Johns-Manville UL-HW-D-0227
UL-HW-D-0263 UL-HW-D-0047 UL-HW-D-0228
SLP-TRK® slotted track meets requirements of all standard UL-HW-D-0278 UL-HW-D-0048 UL-HW-D-0238
building codes: UL-HW-D-0067 UL-HW-D-0239
UL-HW-D-0068 UL-HW-D-0283
IBC; BOCA; SBCCI; UBC UL-HW-D-0069 UL-HW-D-0288
In addition, SLP-TRK complies with the requirements UL-HW-D-0186 UL-HW-D-0305
of ASTM and UL2079. UL-HW-D-0193 UL-HW-D-0309
* SLP-TRK is a registered trademark of Sliptrack Systems, Inc. UL-HW-D-0275 = Shaftwall
** UL and UL Classified are trademarks of Underwriters Laboratories, Inc. UL-HW-D-0277 System
Metal Corner Beads

103 Deluxe® Corner Bead (CBU) 132
Quicksilver™ Corner Bead (CBS)....133
120/135˚ Corner Bead (CB12) ....133
Bullnose 90˚ (CBB)............................134
Bullnose Splayed 135˚ (CBBW)....135
Bullnose Kerfed Bead (CBBK) ......136
“J” Round™ Bullnose (JRND) ..........137
Bullnose Corner and Transition
Caps
2-Way Metal Corner Cap 90˚
(MBC2) ..................................................138
3-Way Metal Corner Cap 90˚
(MBC3) ..................................................138
Bullnose to 90˚ Transition Cap
(M859) ..................................................139
Clinch-On Products, Inc.
Corner Beads
Corner Bead/Electro (CBCO) ........140
Corner Bead/Hot-Dipped (CBCS) 141
Corner Bead/Smooth (CBCP) ......142
Splayed Corner Bead Hot-Dipped
(CBCW) ..................................................143
Hot-Dipped Bullnose (CBBC) ........144
Painted 3/4" Bullnose Splayed Bead
(CBPS) ....................................................145
Hot-Dipped 3/4" Bullnose Splayed
(CBSB) ....................................................146
Painted 3/4" Bullnose (CBPB) ......147
Metal Trims and Finishing
Products
Metal J-Trim (M400 Series™) ..........148
Metal U-Trim/Spackle J (M20A)....149
Metal L-Trim (M20B) ........................150
093 Zinc Control Joint (ZNCJ) ......151
Mini-Bead™ 800 (MB80/ZB80) and
Mini-Bead™ 900 (MB90/ZB90) ....152
129
METAL
BEADS & TRIM
OVERVIEW
Metal Beads & Trims Overview
Metal drywall beads and trims are

traditional reinforcement and finish-
ing products used in gypsum wall-
board construction. Metal beads and
trims provide crisp, clean and straight
protection for drywall corners. The Avantages
most common metal trim is drywall
corner bead. Corner bead is applied Durable—Metal beads and trims provide strong, rigid, dent- and impact-resistant
to 90˚ exposed outside gypsum cor- corner and edge reinforcement.
ners to provide a strong, durable,
Straight—Precision manufactured to exacting specifications to ensure straight,
straight, crisp finished corner.
sharp and crisp edges and corners.
Metal beads and trims are available in
Corrosion Resistant—Electrogalvanized and hot-dipped coatings provide
a wide selection of products and sizes
superior corrosion protection.
to finish almost any drywall finish
condition. Metal beads and trims are Economical—Cost-effective method to protect and finish drywall and
nailed, screwed, stapled or clinched in veneer corners.
place and finished with joint com-
pound. They are low cost, easily
applied and provide high-quality, long
lasting professional finishes.
Overview
Styles & Types

103 Deluxe ® and Metal Trims provide
Quicksilver™ Corner maximum protection and
Beads are galvanized neat finished edges to
steel angles that ensure gypsum panels around
Metal Beads & Trims Overview

straight, protective, clean- window and door open-
finished drywall corners. ings. They also provide a
The 103 Deluxe® brand is clean trim line at inter-
recognized as the pre- sections or where gyp-
mier drywall corner bead sum panels abut dissimi-
finishing trim product. lar surfaces such as
These beads may be columns and window
nailed, stapled or mullions.
clinched into place and are completely concealed with joint
compound. Metal Trim 200-A is a U-shaped trim for use where the gyp-
sum panel edge will be exposed. Installation of the 200
120/135˚ Corner Bead, also referred to as Splayed or Off- series trim is completed with joint compound for a smooth
Angle Bead, provides a clean, crisp finished look at off-angle ready-to-paint surface.
wall intersections.
Metal Trim 200-B is an L-shaped trim and is especially use-
Bullnose Corner Bead is used to create a smooth, round- ful where gypsum panels butt against another surface plane.
ed look to standard drywall corners. Bullnose adds contem- Installation of the 200 series trim is completed with joint
porary styling and a sense of openness to any room. compound for a smooth, ready-to-paint surface.
Corner and Transition Caps provide quick and efficient Metal J-Trim 400 Series is J-shaped, reveal-type galvanized
solutions to finishing bullnose intersections or installation of steel trim used for door or window openings. No finishing
baseboard or crown moldings. This eliminates mitering, with joint compound is required.
gaps and caulking.
Mini-Bead™ 800 is a dual-purpose mesh corner bead suit-
Clinch-On Products, Inc. – The name is synonymous able for one-coat veneer plaster or standard drywall systems.
with premium, high-quality finishing beads and trims. These It’s a galvanized steel outside corner reinforcement with 11⁄4"
products are recognized as premier metal corner reinforce- wide fine mesh expanded flange tapered along outer edges
ments. Beads and trim manufactured by Clinch-On for improved finishing.
Products, Inc. of Dover, Deleware are available in the
Midwest, South, Southeast, Northeast and Colorado under
the Clinch-On® trademark.

Dietrich04_132&133 3/22/04 4:08 AM Page 132
103 Deluxe® corner bead provides

durable, straight and crisp, clean
90˚ outside finished drywall corners.
103 Deluxe® Corner Bead (CBU)
■ Electrogalvanized coating.
■ Superior compound adhesion. 103 Deluxe®
■ Strong metal reinforcement for drywall corners.
■ Galvanized for corrosion protection.
■ Exposed nose of the bead resists impact and
forms a screed for finishing.
Clinch-On
Products Inc.’s
Cornerbead Tool
Faster...Tighter...
More Exact!
Available by the
piece or pallet.
Dietrich™ 103 Deluxe® corner bead is used

to provide a high-quality finish and solid
protection at drywall corners. This traditional
drywall finishing product is nailed, stapled,
screwed or clinched into place. Flanges are
deeply knurled and perforated for excellent
joint compound adhesion.
103 Deluxe® corner bead (CBU) is
considered the premier drywall finishing
corner bead product. This product
combines a unique manufacturing process,
with specially enhanced electrogalvanized
steel to provide consistent, high-quality
finishing each and every time.
Corner Bead (CBU)

DMF Size Weight/Carton Packaging
Product Width Length Pcs./ Cartons/
lbs. (kg)
Code Inches (mm) ft. (m) Box Skid
6–9 2.06 55.7 25.3 75 48
6–10 2.08 56.4 25.6 75 48
CBU 7–0 2.13 55.4 25.1 72 48
103 Deluxe® 1-1/4 x 1-1/4 31.8 x 31.8 8–0 2.44 55.4 25.1 63 48
(Dull Finish) 9–0 2.74 55.4 25.1 56 48
10–0 3.05 55.0 24.9 50 48
12–0 3.66 55.4 25.1 42 48
Dietrich04_132&133 3/22/04 4:10 AM Page 133
Metal Corner Beads
Quicksilver™ metal corner bead is used to achieve durable,

straight, and crisp, clean 90˚ outside finished drywall corners.
■ Hot-dipped galvanized coating. Quicksilver™
■ Superior corrosion protection.
Quicksilver™ Corner Bead (CBS) & 120/135˚ Corner Bead (CB12)

■ Strong metal reinforcement for drywall
corners.
■ Exposed nose of the bead resists impact and
forms a screed for finishing.
Dietrich™ Quicksilver™ corner bead (CBS) is a hot-
dipped, highly durable galvanized bead that offers
Clinch-On superior corrosion protection. This bead is ideal for
Products Inc.’s humid, moisture-prone conditions and high-traffic areas subject to more than normal abuse.
Cornerbead Tool
Faster...Tighter... Recognized as a superior corrosion-resistant drywall finishing corner bead, Quicksilver™
More Exact! corner bead provides a high-quality finish and solid protection at drywall corners. This
Available by the traditional drywall finishing product is nailed, stapled, screwed or clinched into place.
piece or pallet.
Flanges are deeply knurled and perforated for excellent joint compound adhesion.
Corner Bead (CBS)
lbs. (kg)
6–9 2.06 55.7 25.3 75 48
6–10 2.08 56.4 25.6 75 48
CBS 7–0 2.13 55.4 25.1 72 48
Quicksliver™ 1-1/4 x 1-1/4 31.8 x 31.8 8–0 2.44 55.4 25.1 63 48
(Shiny Finish) 9–0 2.74 55.4 25.1 56 48
10–0 3.05 55.0 24.9 50 48
12–0 3.66 55.4 25.1 42 48
Superior finish and reinforcement for off-angle drywall corners.

■ Electrogalvanized for superior compound adhesion.
■ Easy to attach and finish.
Dietrich’s 120/135˚ corner bead, also referred to as splay or

off-angle bead, provides a clean, crisp finished look at off- Splayed
Corner Bead
angle intersections. This traditional drywall finishing bead is
nailed, stapled or screwed into place and finished with joint compound to provide a
high-quality professional finish. Flanges are knurled and perforated to enhance compound
adhesion and the exposed nose forms a screed for finishing.
Splayed Corner Bead (CB12)

lbs. (kg)
CB12 8–0 2.44 55.4 25.1 63 48
120/135º 1-1/4 x 1-1/4 31.8 x 31.8
(Dull Finish) 10–0 3.05 55.0 24.9 50 48

133
Dietrich04_134&135 3/22/04 4:12 AM Page 134
Creates elegant, rounded outside

drywall corners.
■ Electrogalvanized finish for superior compound adhesion.
Bullnose 90˚ (CBB)
■ Galvanized for corrosion protection and durability.

■ Rugged steel construction.
Bullnose
Gypsum board panels must be cut back 3/4" to

accommodate the bullnose radius and ensure a flush fit.
Dietrich™ bullnose corner bead is used to create a smooth, rounded look to

standard drywall corners. Bullnose adds contemporary styling and a sense of
openness to any room. Bullnose bead is nailed, screwed or stapled in place
and finished with joint compound.
Bullnose is available with a galvanized finish meeting ASTM A653 standard or
with a prime painted surface for shadow-free finishing.
Dietrich™ bullnose to 90˚ transition caps are available to provide a smooth
transition to baseboard or corner molding. They install quickly and easily and
can be used with metal, vinyl or paper-faced bullnose corner bead.
Bullnose Corner Bead (CBB)

Product Radius Length Pcs./ Cartons/
lbs. (kg)
7–0 2.13 36.4 16.5 40 32
8–0 2.44 41.6 18.9 40 32
8–0 2.44 41.6 18.9 40 32
CBB
3/4 19 8–6 2.59 44.2 20.0 40 32
(Bullnose 90º)
9–0 2.74 46.8 21.2 40 32
10–0 3.05 48.0 21.8 40 32
10–6 3.20 55.5 25.2 40 32
Packaging may vary be region.
Dietrich04_134&135 3/22/04 4:13 AM Page 135
Metal Corner Beads
Splayed or offset bullnose provides

rounded 135˚ outside corners for a
contemporary, “modern” look.
Bullnose Splayed 135˚ (CBBW)

■ Galvanized coating for corrosion protection and durability.
■ Knurled flanges and hole pattern allow
for superior compound adhesion. Splayed
Bullnose

Dietrich™ splayed or off-angle bullnose is used to create a smooth rounded

look to 135 degree corners. Bullnose adds contemporary styling and a sense
of openness to any room. Bullnose bead is nailed, screwed or stapled in place
and finished with joint compound.
Splayed Bullnose is available with a galvanized finish conforming to ASTM
A653 or prime painted surface for shadow-free finishing.
Bullnose Splayed 135˚ Corner Bead (CBBW)

lbs. (kg)
8–0 2.44 41.6 18.9 40 32
8–6 2.59 44.2 20.0 40 32
CBBW
3/4 19 9–0 2.74 46.8 21.2 40 32
(Bullnose 135º)
10–0 3.05 48.0 21.8 40 32
10–6 3.20 55.5 25.2 40 32
Packaging may vary be region.

135
Dietrich04_136&137 3/22/04 4:15 AM Page 136
Creates a rounded, paintable finish

around door jambs and window trims.
■ Durable steel construction.
Bullnose Kerfed Bead (CBBK)
■ Galvanized coating for corrosion protection.

■ Cost-effective alternative to expensive wood trims.
Kerfed Bullnose
Dietrich™ kerfed bullnose has a distinctive shortened back flange

allowing for insertion into grooved door jambs and window trims.
This feature provides for efficient, clean installation, as well as the
smooth round appearance associated with bullnose trims. It is
roll-formed from galvanized steel conforming to ASTM A653
for protection from corrosion and added durability.
Kerfed Corner Bead (CBBK)

lbs. (kg)
7–0 2.13 49.0 22.2 58 40
8–0 2.44 48.0 21.7 50 40
3/4 19
9–0 2.74 49.0 22.2 45 40
CBBK 10–0 3.05 48.0 21.7 40 40
(Bullnose Kerf) 7–0 2.13 24.0 10.9 29 40
8–0 2.44 24.0 10.9 25 40
1-1/2 38
9–0 2.74 25.0 11.3 23 40
10–0 3.05 24.0 10.9 20 40
Dietrich04_136&137 3/22/04 4:16 AM Page 137
Metal Corner Beads
Used to create a rounded or bullnose edge

at drywall terminations at doors and windows.
■ Strong metal reinforcement at doors and windows.
“J” Round Bullnose (JRND)

■ Requires less finishing compound.
■ Easy to install.
Dietrich™ “J” Round corner bead provides a rounded or bullnose edge at drywall
terminations at doors and windows. “J” Round corner bead is available in 1/2" and
5/8" sizes and in either a galvanized or prime painted surface for shadow-free
finishing. Coating finish must be specified at time of order.
“J” Round
“J” Round Bullnose Corner Bead (JRND)

lbs. (kg)
JRND 8–0 2.44 16.00 7.24 25 40
(Bullnose 3/4 19
“J” Round) 10–0 3.05 16.00 7.24 20 40

137
Dietrich04_138&139 3/22/04 4:18 AM Page 138
Easily joins bullnose corner bead

at two-way intersections.
■ Time-saver by avoiding costly mitering of corners.
2-Way Metal Corner Cap 90˚ (MBC2) & 3-Way Metal Corner Cap 90˚ (MBC3)
■ Corrosion-resistant and durable.
Dietrich Metal Framing™ 2-way

metal corner caps are 2-Way Metal Corner Cap
designed to finish 3/4"
bullnose at 90˚ inside corner
intersections. Examples of
application include windows,
closets, doorways, skylights,
etc. This product is easy to
install and provides a cost-
effective alternative to time-
Available for
consuming mitering of
corners. Overnight
Delivery!
2-Way Metal Corner Cap 90˚ (MBC2)
Product Radius Style lbs. (kg) Pcs./Box Boxes/Skid
Code Inches (mm)
MBC2 3/4 19 2-way metal corner cap 1.00 0.45 50 25
Cost-effective termination
of three-way bullnose intersection.
■ Eliminates need for special corner bead applications.
■ Provides superior corner finish with little effort.
■ Wide flanges aid bullnose corner alignment.
Dietrich Metal Framing™ 3-way

metal corner caps are quick and
efficient solutions to finishing 3/4" 3-Way Metal Corner Cap
bullnose systems at three
intersecting 90˚ corners. Stamped
from corrosive-resistant steel, this
sturdy cap solves many potential Available for
finishing problems associated with Overnight
soffit terminations, bank rail
partitions and fireplaces. Delivery!
3-Way Metal Corner Cap 90˚ (MBC3)
Code Inches (mm)
MBC3 3/4 19 3-Way Metal Corner Cap 1.00 0.45 50 25
Dietrich04_138&139 3/22/04 4:20 AM Page 139
Bullnose Corner and Transition Caps
Provides a transition for bullnose

corners to baseboard or crown molding.
■ Prevents gaps between bullnose corner bead and baseboard or
crown molding.
Bullnose to 90˚ Transition Cap (M859)

■ Eliminates need for time-consuming caulking and filling.
■ Used with baseboard or crown molding up to 4-1/2” in width.
■ Can be used with metal or vinyl bullnose corner beads.
Dietrich™ bullnose corners to 90˚ transition caps simplify installation of baseboard or

crown molding corners into 3/4" bullnose systems. Quick and easy to install, this
product eliminates corner gaps and the need for time-consuming caulking and filling.
Can be used with metal or vinyl 3/4" bullnose corner bead for transition on baseboard
or crown molding up to 4-1/2" in width.
Bullnose to 90˚ Transition Cap
Available for
Overnight
Delivery!
Step 1 Step 2
Step 3 Step 4

Code Inches (mm)
M859 3/4 19 Bullnose to 90˚ Transition 2.00 0.90 50 25

139
Dietrich04_140&141 3/22/04 4:22 AM Page 140
Premier drywall finishing bead.

■ Clinch-On Products, Inc. manufactures premium,
high-quality finishing beads and trims.
■ Sturdy metal reinforcement for 90˚ drywall corners.
Clinch-On Products, Inc. Corner Bead/Electro (CBCO)
■ Electrogalvanized coating offers effective compound adhesion.

■ Nailed or clinched to framing and drywall.

Electrogalvanized
Corner Bead
Clinch-On
Products Inc.’s
Cornerbead Tool
Faster...Tighter...
More Exact!
Available by the
piece or pallet.
Electrogalvanized corner bead manufactured by Clinch-On

Products, Inc. is recognized as the premier product for
providing sturdy metal reinforcement on 90˚ drywall
corners. Knurled and perforated flanges, along with the
electrogalvanized coating, offer superior compound
adhesion for smooth, straight finishes. Corner bead
attachments are accomplished by nailing, stapling, screwing
or clinching through the flanges.

Product Width Length lbs. (kg) Pcs./Carton Carton/Skid
Code Inches (mm) ft. (m)
6–0 1.83 40.5 18.4 75 48
6–9 2.06 45.6 20.7 75 48
6–10 2.08 46.1 20.9 75 48
CBCO
7–0 2.13 46.4 21.0 72 48
Electro 1-1/4 x 1-1/4 31.8 x 31.8
8–0 2.44 45.4 20.6 63 48
(Dull Gray)
9–0 2.74 47.0 21.3 56 48
10–0 3.05 45.0 20.4 50 48
12–0 3.66 54.0 24.5 50 48
Not available in all geographical areas.
Dietrich04_140&141 3/22/04 4:24 AM Page 141
Corner Beads Manufactured by Clinch-On Products, Inc.
Hot-dipped steel reinforcement for long-lasting,

corrosion-resistant drywall corner protection.
Clinch-On Products, Inc. Corner Bead/Hot-Dipped (CBCS)

■ Sturdy metal reinforcement for 90˚ drywall corners.
■ Hot-dipped galvanized for corrosion protection.
■ Knurled and perforated flanges ease compound keying
and nail attachment.
Hot-Dipped Corner Bead
Clinch-On
Products Inc.’s
Cornerbead Tool
Faster...Tighter...
More Exact!
Available by the
piece or pallet.
Hot-dipped corner bead manufactured by Clinch-On Products,

Inc. offers the identical roll-formed precision as its
electrogalvanized counterpart. Hot-dipped galvanized metal
corner bead provides enhanced corrosion protection and sturdy
reinforcement at exposed 90˚ corners. Flanges are knurled and
perforated to ease joint compound adhesion and nail
attachment. Hot-dipped galvanized metal meets ASTM A653.
Clinch-On Products, Inc. Corner Bead/Hot-Dipped (CBCS)

6–9 2.06 45.6 20.7 75 48
7–0 2.13 46.4 21.0 75 48
CBCS
8–0 2.44 45.4 20.6 63 48
Hot-Dipped 1-1/4 x 1-1/4 31.8 x 31.8
9–0 2.74 47.0 21.3 56 48
(Shiny)
10–0 3.05 45.0 20.4 50 48
12–0 3.66 54.0 24.5 50 48

141
Dietrich04_142&143 3/22/04 4:26 AM Page 142
Compound-reducing steel reinforcement

for lasting drywall corner protection.
■ Nonknurled, uses less joint compound.
Clinch-On Products, Inc. Corner Bead/Smooth (CBCP)
■ Electrogalvanized coating offers effective compound adhesion.

■ Nailed or clinched to framing and drywall.
Clinch-On
Products, Inc.
Electrogalvanized
Corner Bead
Smooth bead manufactured by Clinch-On Products, Inc. is a

nonknurled electrogalvanized corner bead designed to use less joint
compound. Roll-formed under the same quality standards as all of
their products, this corner bead provides lasting corner protection to
exposed drywall edges and smooth, straight corners. Nailing
perforations and electrogalvanized coating offer effective joint
compound adhesion. This product is commonly used in selected
southeastern areas.
Clinch-On
Products Inc.’s
Cornerbead Tool
Faster...Tighter...
More Exact!
Available by the
piece or pallet.
Clinch-On Products, Inc. Smooth (No Knurling) Corner Bead/Electro (CBCP)

6–9 2.06 45.6 20.7 75 48
7–0 2.13 46.4 21.0 75 48
CBCP 8–0 2.44 45.4 20.6 63 48
1-1/4 x 1-1/4 31.8 x 31.8
Smooth 9–0 2.74 47.0 21.3 56 48
10–0 3.05 45.0 20.4 50 48
12–0 3.66 54.0 24.5 50 48
Dietrich04_142&143 3/22/04 4:27 AM Page 143
Provides strong durable protection for off-angled

or splayed corners from 120˚–135˚.
Clinch-On Products, Inc. Splayed Corner Bead Hot-Dipped (CBCW)

■ Sturdy metal reinforcement for off-angled drywall corners.
■ Hot-dipped galvanized for corrosion protection. Clinch-On
Products, Inc.
■ Knurled and perforated flanges ease Splayed Corner Bead
keying of compound.
Clinch-On Products, Inc. splayed corner bead is a roll-

formed metal angle used to establish smooth, straight
corners at bay windows, stairwell ceilings and similar
conditions where drywall intersects at angles of 120˚ or
more. Knurled and perforated flanges provide strong
adhesion of compound and the exposed nose forms a
screed for finishing. Hot-dipped galvanized meets ASTM
A653. This product is also available with an electrogalvanized
coating (CBSE) in certain regions.
Clinch-On Products, Inc. Splayed Corner Bead/Hot-Dipped (CBCW)

CBCW 8–0 2.44 45.4 20.6 40 48
120/135˚ 1-1/4 x 1-1/4 31.8 x 31.8 9–0 2.74 47.0 21.3 40 48
(splayed) 10–0 3.05 45.0 20.4 40 48

143
Dietrich04_144&145 3/22/04 4:29 AM Page 144
Creates elegant rounded outside drywall corners.

■ Sturdy metal reinforcement for smooth, rounded drywall corners.
Clinch-On Products, Inc. Hot-Dipped Bullnose (CBBC)
■ Hot-dipped galvanized coating resists corrosion.

■ Generous 3/4” flange enables nail, screw
or adhesive application.
Clinch-On
Products, Inc.
Hot-Dipped
Bullnose
Hot-dipped bullnose corner bead manufactured by Clinch-On Products, Inc.

is used to create a smooth, rounded look to standard drywall corners.
Bullnose adds contemporary styling and a sense of openness to any room.
The hot-dipped finish provides superior corrosion resistance.
Gypsum board panels must be cut back 3/4" to accommodate the bullnose
radius and ensure a flush fit. Bullnose bead is nailed, screwed or stapled in
place and finished with joint compound.
Bullnose to 90˚ Transition Caps are available to provide a smooth transition
to baseboard or crown molding. They install quickly and easily and can be
used with metal, vinyl or paper-faced bullnose corner bead.
Clinch-On Products, Inc. Bullnose Corner Bead/Hot-Dipped (CBBC)

Product Radius Length lbs. (kg) Pcs./Carton Carton/Skid
6–0 1.83 26.4 12.0 40 32
6–9 2.06 29.7 13.5 40 32
6–10 2.08 30.1 13.7 40 32
CBBC
7–0 2.13 30.8 14.0 40 32
Hot-Dipped 3/4 19
8–0 2.44 35.2 16.0 40 32
(shiny)
9–0 2.74 39.6 18.0 40 32
10–0 3.05 44.0 20.0 40 32
12–0 3.66 52.8 23.9 40 32
Dietrich04_144&145 3/22/04 4:30 AM Page 145
Corner Beads Manufactured By Clinch-On Products, Inc.
Strong steel reinforcement for lasting

corner protection.
Clinch-On Products, Inc. Painted 3/4" Bullnose Splayed Bead (CBPS)

■ Prime painted surface provides shadow-free finish.
■ Underlying galvanized coating resists corrosion.
■ Excellent compound adhesion.
Painted Splayed Bullnose
Gypsum board panels must be cut back 3/4" to accommodate

Painted 3/4" splayed bullnose manufactured by Clinch-On the bullnose radius and ensure a flush fit.
Products, Inc. is used to create a smooth, rounded look to
120–135˚ corners. The prime painted surface provides a ready-
to-paint shadow-free finish.
Bullnose bead is nailed, screwed or stapled in place and
finished with joint compound.
Clinch-On Products, Inc. Painted Splayed Bullnose Corner Bead (CBPS)

6–9 2.06 29.7 13.5 40 32
7–0 2.13 30.8 14.0 40 32
CBPS 8–0 2.44 35.2 16.0 40 32
3/4 19
(painted) 9–0 2.74 39.6 18.0 40 32
10–0 3.05 44.0 20.0 40 32
12–0 3.66 52.8 23.9 40 32

145
Dietrich04_146&147 3/22/04 4:32 AM Page 146
Strong steel reinforcement for lasting corner protection

■ Sturdy, rounded wall transition at open angled corners.
Clinch-On Products, Inc. Hot-Dipped 3/4" Bullnose Splayed (CBSB)
■ Hot-dipped galvanized coating resists corrosion.

■ Generous 3/4” flange allows for nail,
screw or adhesive attachment.
Clinch-On
Products, Inc.
Hot-Dipped
Splayed
Bullnose
Hot-dipped 3/4" bullnose splayed manufactured by Clinch-On

Products, Inc. is a sturdy metal component used to create a
smooth, round transition at exposed open angled Gypsum board panels must be cut back 3/4" to
intersections exceeding 120˚. A generous 3/4" flange accommodate the bullnose radius and ensure a flush fit.
allows for nail, screw or adhesive attachments. Knurled and
perforated flanges provide effective joint compound
adhesion. The hot-dipped coating provides added
corrosion resistance and is commonly used in humid
regions. Splayed bullnose is also available with
electrogalvanized coating (CBBW ).
Clinch-On Products, Inc. Hot-Dipped Bullnose Splayed Corner Bead (CBSB)

6–9 2.06 29.7 13.5 40 32
7–0 2.13 30.8 14.0 40 32
CBSB
8–0 2.44 35.2 16.0 40 32
Hot-Dipped 3/4 19
9–0 2.74 39.6 18.0 40 32
(Shiny)
10–0 3.05 44.0 20.0 40 32
12–0 3.66 52.8 23.9 40 32
Dietrich04_146&147 3/22/04 4:33 AM Page 147
Creates elegant, rounded, shadow-free

outside drywall corners.
Clinch-On Products, Inc. Painted 3/4" Bullnose (CBPB)

■ Prime painted surface provides a shadow-free finish.
■ Underlying galvanized coating resists corrosion.
■ Excellent compound adhesion.
Clinch-On
Products, Inc.
Painted Bullnose

Painted 3/4" bullnose corner bead manufactured by Clinch-On Bullnose to 90˚ Transition Caps are available to provide a
Products, Inc. is used to create a smooth, rounded look to smooth transition to baseboard or crown molding. They
standard drywall corners. Bullnose adds contemporary styling install quickly and easily and can be used with metal, vinyl or
and a sense of openness to any room. The prime painted paper-faced bullnose corner bead.
surface provides a ready-to-paint shadow-free finish. Bullnose
bead is nailed, screwed or stapled in place and finished with
joint compound.
Clinch-On Products, Inc. Bullnose Corner Bead/Painted (CBPB)

6–9 2.06 29.7 13.5 40 32
7–0 2.13 30.8 14.0 40 32
CBPB 8–0 2.44 35.2 16.0 40 32
3/4 19
(painted) 9–0 2.74 39.6 18.0 40 32
10–0 3.05 44.0 20.0 40 32
12–0 3.66 52.8 23.9 40 32

147
Dietrich04_148&149 3/22/04 4:34 AM Page 148
Used as a finished edge for wallboard at door

and window openings or when gypsum
panels meet dissimilar surfaces.
Metal J-Trim (M400 Series™)
■ Requires no joint compound.

■ Hemmed edges for quick installation.
Dietrich™ metal J-trims are strong, reveal-type galvanized

steel casings that provide maximum protection and neat
finished edges to drywall terminations around door and
window openings. Metal J-trims also deliver a clean trim
line at intersections or where gypsum panels abut
dissimilar surfaces such as columns and window mullions. J-Trim
Hemmed-edges allow for quick installation and do not
require joint compound for finishing.
Metal J-Trim (M400 Series™)

lbs. (kg)
Code Inches (mm) ft. (m) Carton Skid
8–0 2.44 36.0 16.3 50 50
M400 3/8 9.5
10–0 3.05 45.0 20.4 50 50
8–0 2.44 36.0 16.3 50 50
M401 1/2 12.7
10–0 3.05 45.0 20.4 50 50
8–0 2.44 36.0 16.3 50 50
M402 5/8 15.9
10–0 3.05 45.0 20.4 50 50
Dietrich04_148&149 3/22/04 4:35 AM Page 149
Metal Trims and Finishing Products
Used in conjunction with joint compound when a clean,

finished edge is required at door and window
openings or when dissimilar materials meet.
Metal U-Trim/Spackle J (M20A)

■ Knurled, perforated flange enhances
compound adhesion.
U-Trim/Spackle J
Dietrich™ U-trim, or spackle J is used to provide maximum

protection and clean finished edges on gypsum panels around
door and window openings and when wallboard abuts
dissimilar surfaces, such as suspended ceilings, beams, plaster,
masonry and concrete. U-trim is easily installed by sliding trim
over the edge of the board and nailing or screwing through the
knurled (long) flange. Installation is completed with application
of joint compound for a smooth ready-to-paint surface.
Metal U-Trim/Spackle J (M20A)

lbs. (kg)
8–0 2.44 36.0 16.3 50 50
1/2 12.7
10–0 3.05 45.0 20.4 50 50
M20A
8–0 2.44 36.0 16.3 50 50
5/8 15.9
10–0 3.05 45.0 20.4 50 50

149
Dietrich04_150&151 3/22/04 4:37 AM Page 150
Provides a clean finished edge for wallboard and can be

installed after gypsum panel installation.
■ Hemmed front flange for rigidity.
Metal L-Trim (M20B)
■ Knurled, perforated flange enhances joint compound adhesion.

■ Easy to attach and finish.
L-Trim
Dietrich™ metal L-trim is used to provide a clean finished

edge at door and window openings or when wallboard
abuts dissimilar surfaces such as suspended ceilings,
beams, plaster, masonry and concrete. L-Trim is installed
after the gypsum panels are already in place, unlike
spackle J, which must be installed during gypsum panel
installation. L-trim is easily attached with screws or nails
after the panels are in place. Installation is completed with
joint compound for a smooth ready-to-paint surface.
Metal L-Trim (M20B)

lbs. (kg)
8–0 2.44 28.0 12.7 50 50
1/2 12.7
10–0 3.05 35.0 15.9 50 50
M20B
8–0 2.44 28.0 12.7 50 50
5/8 15.9
10–0 3.05 35.0 15.9 50 50
Dietrich04_150&151 3/22/04 4:39 AM Page 151
Metal Trims and Finishing Products
Relieves stresses of expansion

and contraction across large ceiling
and wall areas.
093 Zinc Control Joint (ZNCJ)

■ Relieves stresses of expansion and contraction.
■ Superior corrosion resistance.
■ Easy to apply and finish.
■ Use with drywall or veneer plaster.
093 Zinc Control Joint
Dietrich™ 093 Zinc control joint is applied between abutting

gypsum panels, and is used to relieve stresses of expansion
and contraction of drywall and veneer plaster systems in
large ceiling and wall expanses over 30' in length. 093 Zinc
Control Joint is typically installed from door header to
ceiling, from floor to ceiling in long partition runs, and from
wall to wall in large ceiling areas. Zinc control joints are
manufactured from high-quality pure zinc and can be used
for interior or exterior applications. The 1/4" by 7/16"
opening is protected by plastic tape, which is removed after
joint compound or plaster has been applied and the finish is
completed.
Note: Where fire and sound control are prime
considerations, an approved seal must be installed
behind the control joint.

Product Grounds Length Pcs./ Cartons/
lbs. (kg)
ZNCJ 3/32 2.4 10–0 3.05 22.5 10.2 25 64

151
Dietrich04_152 3/22/04 4:41 AM Page 152
High-quality veneer finishing corner bead

provides superior keying for joint
compound for one-coat plaster Mini-Bead™
veneer systems.
Mini-Bead™ 800 (MB80/ZB80) and Mini-Bead™ 900 (MB90/ZB90)
■ Mini-mesh flanges for plaster keying.

■ Galvanized or zinc for corrosion protection.
■ Universally accepted as Kal-Korner alternative.
■ Eliminates shadowing and edge cracking.
Kal-Korner Bead* is no
longer available from
Dietrich Metal Framing.
Dietrich™ Mini-Bead™ is a
recognized alternative.
Dietrich™ Mini-Bead™ 800 and 900 corner bead are galvanized

steel reinforcements for interior, outside corner, veneer or thin
wall plaster applications. 1-1/4" wide fine mesh expanded flanges
are tapered along the outer edges to enhance veneer plaster
concealment. Mini-Bead™ 800 corner bead has 1/16" grounds for
one-coat veneer plaster and 90 keys per linear foot for excellent
bonding and strong corners. Mini-Bead™ 900 corner bead has
3/32" grounds for two-coat veneer plaster systems. Zinc Mini-
Bead™ 900 should be used in exterior finish systems. Flange
attachments can be accomplished by either nailing or stapling.
Note: Zinc Mini-Bead™ corner bead should be used in
exterior finish systems.
Mini-Bead™ 800 (MB80/ZB80) and 900 (MB90/ZB90)
Product Ground Width Length lbs. (kg) Pcs./Carton Cartons/Skid
Code Inches (mm) Inches (mm) ft. (m)
8–0 2.44 33.6 15.2
MB80 1/16 1.6 1-1/4 x 1-1/4 31.8 x 31.8 60 25
10–0 3.05 42.0 19.0
8–0 2.44 33.6 15.2
MB90 3/32 2.4 1-1/4 x 1-1/4 31.8 x 31.8 60 25
10–0 3.05 42.0 19.0
ZB80** 1/16 1.6 1-1/4 x 1-1/4 31.8 x 31.8 10–0 3.05 36.0 16.3
60 25
ZB90** 3/32 2.4 1-1/4 x 1-1/4 31.8 x 31.8 10–0 3.05 36.0 16.3
*Kal-Korner Bead is a registered trademark of National Gypsum Company.

**Zinc.
Vinyl Corner Beads

Vinyl Corner Bead (VLCB)................156
Vinyl #1 Corner with 2-1/2" Legs
(VC1A) ....................................................156
Vinyl Splayed Corner Bead 120/135˚
(VLSB) ....................................................157
Vinyl Archway Corner Bead (VLAB)157
Vinyl Bullnose (VBCB) ......................158
Vinyl Bullnose Splayed (VBSB)......158
Vinyl Bullnose Kerfed (VBKB) ........159
Vinyl Bullnose Archway (VBAB) ....159
Bullnose Corner and Transition
Caps
2-Way Inside 3/4" Bullnose Corner
Cap 90˚ (M285) ................................160
3-Way 3/4" Bullnose Corner Cap 90˚
(M385) ..................................................160
3-Way Overlap 3/4" Bullnose Corner
Cap 90˚ (M384) ................................161
3-Way Overlap 1-1/2 Bullnose Corner
Cap 90˚ (M387)..................................161
3-Way Off-Angle Overlap 3/4" (M134)
162
1-1/2" (M187) Bullnose Corner Caps
162
163
Vinyl Trims and Finishing
Products
Vinyl J-Bead (VLJB) ............................164
Vinyl Mudable J-Bead (VLMJ) ........164
Vinyl L-Stop Bead (VLLS) ................165
Vinyl Rip Bead™ (VLZL)......................165
Vinyl Partition End Cap 1/2" (PC50)
or 5/8 " (PC58)..................................166
Vinyl 093 Drywall Control Joint (VCJT)
166
153
VINYL BEADS
& TRIMS
OVERVIEW
Vinyl Beads & Trims Overview
Vinyl beads and trims are designed

to provide superior, long-lasting inte-
rior finishes for drywall and veneer
plaster. These beads and trims are
used to provide durable, corrosion-
and impact-resistant edges, corners, Advantages
arches, curvatures and numerous
Durability—Vinyl accessories are impervious to corrosion when coated with veneer
other finishing applications. Vinyl
plaster, wet joint compounds or when placed in contact with steel or aluminum frames.
beads and trims continue to grow in
Vinyl accessories do not contain plasticizers that could migrate to the surface.
popularity because they give archi-
tects, interior designers and contrac- Impact Resistance—Due to superior impact resistance, rigid vinyl accessories are
tors much more flexibility to create resistant to dents and kinks of corners and edges, during and after construction.
dramatic, sweeping arches, curva-
tures and distinctive architectural Corrosion Resistance—Vinyl accessories are impervious to rust, corrosion, galvanic
details. corrosion, electrolysis, and are not affected by fast-setting joint compounds or topping
compounds.
Solid Color—Standard color is white for a shadow-free finish.
Paint Adhesion Properties—Excellent, no priming is required.
Ignition Resistance—Rigid vinyl is self-extinguishing, and will not continue to sup-
port combustion once flame source is removed; therefore, it will not cause a fire to
re-start or spread. It offers better resistance to burning than many other common
building materials.
Expansion and Contraction—Vinyl accessories are manufactured with perforations
in the flanges to enable finishing compounds or veneer plaster to flow through and
bond to wallboard. Perforated flanges remain embedded in matrix to reinforce the
edges and corners. These factors, along with the fastening of accessories to the sub-
strate prior to coating, make the accessories part of the building unit and therefore will
move with it as the temperature changes, consequently the coefficient of expansion of
rigid vinyl has little or no bearing on the installation.
Overview
Styles & Types

Vinyl Corner Bead is a 3/4" Vinyl Bullnose Kerfed Corner Bead is the same as
rigid, easy-to-apply cor- regular 3/4" radius bead, except it is kerfed so that the leg
ner reinforcement that fits the channel of door and window jambs for smooth,
may be nail or staple rounded encasement.
Vinyl Beads & Trims Overview

applied. Flanges are
1-1/4" wide and are per- Vinyl J-Trim provides a finished edge at gypsum board
forated to aid joint com- stops around door and window openings and at ceiling
pound bond. Rigid vinyl intersections. Requires no joint compound. Rigid vinyl is not
resists dents, thermal a thermal transmitter and helps stop condensation where
transmission and will board terminates at exterior metal surfaces, such as window
not corrode. frames and mullions. It’s rustproof and dent resistant.
Vinyl Splayed Bullnose Corner Bead fits off-angle cor- Rip Bead™ vinyl beads
ners that typically are 120˚–135˚. produce an exceptional
finish at the intersection
1-1/4" Archway Corner Bead has the same properties as of gypsum board and
regular 1-1/4" vinyl corner bead, plus it’s manufactured with ceiling grid. Once joint
notched tabs on one flange to permit flexible forming of compound is applied,
archway edges. Available in 8' and 10' lengths. the tear-away strip is
removed, producing a
All Dietrich vinyl products readily accept finish treatments crisp, clean edge.
such as paint and spray or roll-on textures.
Vinyl L-Stop Bead is a
90˚ Bullnose Corner Bead comes in a choice of 3/4" or convenient finished ter-
more dramatic 1-1/2" radius to make rounded, more con- mination for gypsum panel surfaces. Bead may be nail or sta-
temporary corners. Fits 90˚ corners. ple attached to the stud through the bead flange. The flange
Vinyl 90˚ Bullnose Archway Corner Bead provides a is 1-1/4" wide and is perforated to aid joint compound bond.
bullnose treatment around arched openings. Tabs enable Rigid vinyl is rust proof and dent resistant. Surface is treated
bead to be arched to a 10" inside radius or 18" outside with an alkyd texture to help joint compound and paint
radius. adhere.
OVER 850+ Vinyl Products

The products in this section are limited to common drywall and veneer plaster finishing accessories.
An extensive array of vinyl products is available through our vinyl specialty company, Vinyl Corp.
Vinyl Corp. is one of the largest full-line vinyl bead and trim manufacturers in the U.S. Product cat-
egories include vinyl beads, trims and control joints for Stucco/Plaster, Drywall, Exterior Insulation
Finish Systems (EIFS), and Direct-applied Exterior Finish Systems (DEFS).
Vinyl Corp. is committed to meeting the most complex challenges in the wall and ceiling industry
through innovative product design, exacting manufacturing tolerances and the most complete
selection of accessories in the industry. Contact one of Vinyl Corp.’s customer care representa-
tives at 800-648-4695.

155
Dietrich04_156-157 3/22/04 4:43 AM Page 156
Rust-proof, impact-resistant vinyl corner reinforcement.

■ Rust proof and dent resistant.
■ Multiple perforations enhance joint compound bond.
Vinyl Corner Bead (VLCB) & Vinyl #1 Corner with 2-1/2" Legs (VC1A)
■ Maintains shape with no sharp edges or burrs when field cut.

■ Easily cut with snips, utility knives or scissors.
Dietrich™ vinyl
corner bead
is a rigid, easy-to-
Vinyl Corner Bead
apply 90˚ corner
reinforcement
that can be nailed
or stapled into bonding. The pronounced nose provides a ground and
place. Multiple screed to help the finisher achieve precise finishing depth.
perforations Rigid vinyl is dent resistant, rust proof and maintains shape
along the 1-1/4" with no sharp edges or burrs when field cut. All Dietrich™
flanges enhance vinyl products readily accept finish treatments such as paint
joint compound and spray or roll-on textures.
Vinyl Corner Bead (VLCB)

lbs. (kg)
8 2.44 24.0 10.9 50 35
VLCB 1-1/4 x 1-1/4 31.8 x 31.8
10 3.05 30.0 13.6 50 35
Great for high-traffic and high-abuse corners.

■ Quick and easy to install.
■ Sturdy reinforcement for exterior stucco corners.
Dietrich™ Vinyl #1 2-1/2" Leg Vinyl

Corner provides Corner Bead
straight, true,
rust-proof
layers of 5/8" gypsum. The pronounced nose of this bead
reinforcement for
serves as a screed to aid the applicator in achieving the desired
90˚ corners in
finish depth. Stiffener ribs and nail perforations contribute to
high-traffic and
quick and easy installation that is straight and level.
high-abuse areas
where extra corner
protection is
desired. Ideal for
finishing double
Vinyl #1 Corner with 2-1/2" Legs (VC1A)

lbs. (kg)
8 2.44 40.0 18.1 50 25
VC1A 2-1/2 x 2-1/2 63.5 x 63.5
10 3.05 50.0 22.7 50 25
Dietrich04_156-157 3/22/04 4:44 AM Page 157
Vinyl Corner Beads
Versatile, rigid corner reinforcement

for off-angled wallboard intersections.
Vinyl Splayed Corner Bead 120/135˚ (VLSB) & Vinyl Archway Corner Bead (VLAB)
■ Multiple perforations enhance joint compound bond. Splayed Corner
■ Flexibility allows flush fit on unusual outside corner angles. Bead
Dietrich™ 120/135˚ corner or splayed bead is used to finish off angle interior corners
from 120–135˚. Designed to provide straight, rust-proof, dent-resistant corners, the
flexibility of vinyl splay bead allows a flush fit on many unusual outside wallboard
intersections. Multiple perforations along the 1-1/4" flanges enhance joint compound
bonding. Easy to apply, this vinyl trim can be nailed, stapled or attached with a high-
tack spray adhesive. Vinyl beads are easily cut with snips, utility knife or scissors
without distorting the profile.
Vinyl Splayed Corner Bead 120/135˚ (VLSB)

lbs. (kg)
8 2.44 24.0 10.9 50 35
VLSB 1-1/4 x 1-1/4 31.8 x 31.8
10 3.05 30.0 13.6 50 35
Used to finish arches, curvatures and most radius conditions.

■ Ideal for archways, curves and radius windows.
■ Maximum flexibility.
■ Notched flange adapts to virtually any radius condition.
Archway Corner Bead
Dietrich™ vinyl archway
corner bead form fits
almost any arch, curve
or radius to provide and notches enhance compound and veneer plaster bonding.
rigid corner and edge In addition to nail or staple fastening, an adhesive should be
protection. The notched used to secure arch tabs to gypsum board.
single flange adapts to
virtually any radius
condition. Multiple
perforations along flanges
Vinyl Archway Corner Bead (VLAB)
lbs. (kg)
8 2.44 20.0 9.1 50 35
VLAB 1-1/4 x 1-1/4 31.8 x 31.8
10 3.05 25.0 11.3 50 35

157
Dietrich04_158-159 3/22/04 4:46 AM Page 158
Used to create elegant, contemporary,

rounded 90˚ drywall corners.
Vinyl Bullnose (VBCB) & Vinyl Bullnose Splayed (VBSB)

■ Especially useful in children’s play areas. Bullnose Corner Bead
Dietrich™ vinyl bullnose corner bead is

used to create a smooth, rounded look to
standard drywall corners. Vinyl bullnose
adds contemporary styling and a sense of
openness to any room. Available in choice
of 3/4" or more dramatic 1-1/2" radius.
Easily installed with nails, screws or staples,
this sturdy vinyl product is rust-proof and
dent-resistant.
Gypsum panels must be cut back 3/4"
to accommodate bullnose radius and
ensure a flush fit on the flanges.
90˚ Vinyl Bullnose (VBCB)
lbs. (kg)
8 2.44 25.20 11.43 35 35
VBCB 3/4 19
10 3.05 31.50 14.29 35 35
90º
8 2.44 31.20 14.15 30 35
Bullnose 1-1/2 38
10 3.05 39.00 17.69 30 35
Creates contemporary splayed or off-angle rounded corners.

■ Flexibility allows snug fit on unusual outside corner angles.
Dietrich™ vinyl bullnose
splayed corner bead is
used to finish off-angle Splayed
Bullnose
interior corners from
120–135˚ when a
rounded “bullnose”
look is desired. This durable trim product is dent-resistant, rust-proof and
Bullnose bead provides easily finished. Multiple elongated perforations along both
an architecturally flanges enhance joint compound bond. Available in 3/4"
attractive, contemporary and open feel to any room. and 1-1/2" radius.
Vinyl Bullnose Splayed (VBSB)
lbs. (kg)
8 2.44 19.60 8.89 35 35
3/4 19
10 3.05 24.50 11.11 35 35
VBSB
8 2.44 24.00 10.89 30 35
1-1/2 38
10 3.05 30.00 13.61 30 35
Dietrich04_158-159 3/22/04 4:48 AM Page 159
Vinyl Corner Beads
Creates a rounded or bullnose paintable finish

around door and window trims.
Vinyl Bullnose Kerfed (VBKB) & Vinyl Bullnose Archway (VBAB)

■ Cost-effective alternative
to expensive wood trims.
Dietrich™ vinyl
bullnose kerfed Bullnose Kerfed
corner bead has a
distinctive shortened
back flange, allowing
for insertion into grooved door jambs and window trims. trims. Rigid vinyl is dent resistant, rust proof and maintains
This feature provides for efficient, clean installation as well as shape with no sharp edges or burrs when field cut. A cost-
the smooth, rounded appearance associated with bullnose effective alternative to expensive wood trims.
Vinyl Bullnose Kerfed Bead (VBKB)

lbs. (kg)
8 2.44 11.2 5.1 50 35
3/4 19
10 3.05 14.0 6.4 50 35
VBKB
8 2.44 12.0 5.4 50 35
1-1/2 38
10 3.05 15.0 6.8 50 35
For finishing arches, curvatures and most radius

with a rounded bullnose look.
■ Ideal for archways,
curves and dramatic
architectural detailing. Bullnose
■ Rust proof and Archway
dent resistant.
■ Multiple perforations Dietrich™ vinyl bullnose archway corner bead is used to
enhance joint provide a rounded, contemporary look to archways, curves
compound bond. or just about any radius. Notched flanges enable this bead
■ Maximum flexibility. to be arched to an inside or outside radius.
■ Notched flange adapts Each tab on the archway bead should be secured with
to virtually any radius adhesive or staples before application of joint compound.
condition. Multiple perforations along the flanges enhance joint
compound bond. Available in 3/4" and 1-1/2" radius.
Vinyl Bullnose Archway (VBAB)
lbs. (kg)
8 2.44 14.0 6.4 35 35
3/4 19
10 3.05 17.5 7.9 35 35
VBAB
8 2.44 16.8 7.6 30 35
1-1/2 38
10 3.05 21.0 9.5 30 35

159
Dietrich04_160-161 3/22/04 4:50 AM Page 160
For a professional finish where

two bullnose corners meet at 90.̊
■ Eliminates costly mitering of corners.
2-Way Inside 3/4" Bullnose Corner Cap 90˚ (M285) & 3-Way 3/4" Bullnose Corner Cap 90˚ (M385)
Dietrich™ vinyl 2-Way 3/4" corner

caps provide the ideal component
to transition bullnose corner beads
to a crisp finish where inside 2-Way Inside 3/4" Bullnose Corner Cap 90˚
corners intersect at 90˚. Examples
of applications include windows,
closets, doorways, skylights, etc.
Easy to install, this component Available for
provides a cost-effective alternative to Overnight
time-consuming mitering of corners. Delivery!
2-Way Inside 3/4" Bullnose Corner Cap 90˚ (M285)
Product Style
Radius (mm) lbs. (kg) Pcs./Box Boxes/Skid
Code
M285 3/4 19.1 Plastic 2-Way Corner Cap 2.0 0.90 50 25
For a professional finish where three

3/4" bullnose corners meet at 90˚.
■ No need for special corner bead applications.
■ Huge labor saver.
■ Favorite of metal bullnose corner bead users.
Dietrich™ 3-Way 3/4" bullnose 90˚ corner

caps provide the ideal solution to finish
corners quickly and efficiently at three-way
90˚ 3/4" bullnose intersections. This Corner 3-Way 3/4" Bullnose Corner Cap 90˚
Cap features extended tabs for easier
alignment and a professional finish, and it
works well with both metal and vinyl
bullnose corner beads. Available for
M385 Bullnose Corner Cap eliminates the Overnight
need for special corner bead applications Delivery!
and time-consuming mitering.
3-Way 3/4" Bullnose Corner Cap 90˚ (M385)

Product Style
Code
M385 3/4 19.1 Plastic 3-Way Corner Cap 2.0 0.90 50 25
Dietrich04_160-161 3/22/04 4:52 AM Page 161
Use to finish three-way bullnose 90˚ intersections.

Added tabs for enhanced corner alignment.
■ Substantially reduces labor.
3-Way Overlap 3/4" Bullnose Corner Cap 90˚ (M384) & 3-Way Overlap 1-1/2 Bullnose Corner Cap 90˚ (M387)
■ Works with metal and vinyl bullnose corner beads.
Dietrich™ 3-Way 3/4" overlap corner

caps provide the ideal solution to
finish corners quickly and efficiently
at three-way 90˚ bullnose
intersections. Easy to install, this
rust-proof and dent-resistant vinyl
cap solves many potential finishing 3-Way Overlap 3/4" Bullnose
problems. Corner Cap 90˚
3-Way Overlap 3/4" Bullnose Corner Cap 90˚ (M384)

Product Style
Code
M384 3/4 19.1 Plastic 3-Way Overlap Corner Cap 2.0 0.90 50 25
For a professional finish where three

1-1/2" bullnose corners meet at 90˚. Available for
Overnight
■ Creates a soft, rounded appearance. Delivery!
■ Easy to install. 3-Way 1-1/2"
■ Huge labor savings. Bullnose Corner
Cap 90º
Dietrich™ 3-Way 1-1/2" 90˚ bullnose corner
cap provides the ideal solution to finish
corners quickly and efficiently at three-way
90˚ 1-1/2" bullnose intersections. It’s
especially designed to deliver an ultra-soft
corner appearance associated with 1-1/2" bullnose
corner bead. Eliminates the need for special corner bead applications and time-
consuming mitering. Easy to install, extended tabs and flanges ensure proper corner
alignment and professional finish.
3-Way 1-1/2" Bullnose Corner Cap 90º (M387)
Product Style
Code
M387 1-1/2 38.1 Plastic 3-Way Corner Cap 1-1/2" 0.04 0.02 50 25

161
Dietrich04_162-163 3/22/04 4:55 AM Page 162
Provides a professional finish at 135˚ off-angle,

three-way 3/4" bullnose intersections.
3-Way Off-Angle Overlap 3/4" (M134) & 1-1/2" (M187) Bullnose Corner Caps
Dietrich™ 3-Way 135˚ off-angle

overlap 3/4" bullnose corner caps 3-Way
Off-Angle
provide the ideal solution to join
Overlap 3/4"
and finish corners at three-way off- Bullnose
angle 135˚ bullnose intersections. Corner Cap
The bullnose cap eliminates time-
consuming mitering and creates
a professional transition.
Available for
Overnight
Delivery!
3-Way Off-Angle Overlap 3/4" Bullnose Corner Cap (M134)
Product Style
Code
M134 3/4 19 3-Way Off-Angle Corner Cap 3/4" 2.0 0.9 50 25
Provides a professional finish at three-way off-angle

1-1/2" bullnose intersections.
■ Substantially reduces labor.
Dietrich™ 3-Way off-angle 1-1/2"

bullnose corner caps provide the ideal
solution to finish corners quickly and
efficiently at three-way off-angle
1-1/2" bullnose intersections. These 3-Way Off-Angle 1-1/2"
caps eliminate time-consuming Bullnose Corner Cap
mitering and create a professional
transition. Easy to install, extended tabs
and flanges ensure proper corner
alignment. Available for
Overnight
Delivery!
3-Way Off-Angle 1-1/2" Bullnose Corner Cap (M187)
Product Style
Code
M187 1-1/2 38 3-Way Off-Angle Corner Cap 1-1/2" 2.0 0.9 50 25
Dietrich04_162-163 3/22/04 4:57 AM Page 163
Used to transition rounded bullnose

corners to 90˚ for easy baseboard
and crown molding installation.

■ Prevents gaps between bullnose corner bead
and baseboard or crown molding.
■ Eliminates need for time-consuming caulking and filling.
■ Used with baseboard or crown molding up to 4-1/2" in width.
■ For use with metal, vinyl or paper-faced corner beads.
Dietrich™ Bullnose to 90˚

transition caps simplify installation
of baseboard or crown molding
corners into 3/4" bullnose systems.
Quick and easy to install, this
product eliminates corner gaps and
the need for time-consuming
caulking and filling. Can be used
with metal, vinyl or paper-faced
3/4" bullnose corner bead for Bullnose to 90˚ Transition Cap
transition onto baseboard or crown
molding up to 4-1/2" in width.
Available for
Overnight
Delivery!
Step 1 Step 2 Step 3

Product Style
Code
Bullnose To 90˚
M859 3/4 19 2.0 0.9 50 25
Transition Cap 3/4"

163
Dietrich04_164-165 3/22/04 4:59 AM Page 164
Creates a finished edge at gypsum stops

around door and window openings
and ceiling intersections.
Vinyl J-Bead (VLJB) & Vinyl Mudable J-Bead (VLMJ)
■ Moisture and
dent resistant.
■ Produces
finished J-Bead
edges
at panel
terminations.
Dietrich™ vinyl J-bead provides a finished edge at gypsum
■ Requires board stops around door and window openings and at ceiling
no joint intersections. Requires no joint compound. Rigid vinyl is not
compound.
a thermal transmitter and helps stop condensation where
■ Nail or gypsum board terminates at exterior metal surfaces, such as
slip on. window frames and mullions. Rust proof and dent resistant.
Vinyl J-Bead (VLJB)
Product Width Length Pcs./ Boxes/
lbs. (kg)
8 2.44 20.0 9.0 50 35
1/2 12.7
10 3.05 25.0 11.3 50 35
VLJB
8 2.44 20.0 9.0 50 35
5/8 15.9
10 3.05 25.0 11.3 50 35
Mudable edge trim used to finish drywall edges

when dissimilar materials and door and
window encasements meet gypsum.
■ Moisture and dent resistant.
■ Raised shoulder and perforations enhance compound adhesion.
Mudable J-Bead
■ Produces finished edges at panel terminations.
Mudable J-bead is used to cover and protect exposed ends of gypsum panels that abut to
other substrates such as masonry, glass and metal frames. Raised shoulder and extensive
perforations along flange ensure excellent finishing compound adhesion and flush finish.
Moisture- and thermal-resistant properties of rigid vinyl trims make for ideal use around
bathtubs, showers, windows and skylights. Rust proof and dent resistant. Easy to cut and
install. Available in 1/2" and 5/8" depths.
Vinyl Mudable J-Bead (VLMJ)

lbs. (kg)
8 2.44 16.0 7.2 50 25
1/2 12.7
10 3.05 20.0 9.0 50 25
VLMJ
8 2.44 16.0 7.2 50 25
5/8 15.9
10 3.05 20.0 9.0 50 25
Dietrich04_164-165 3/22/04 5:00 AM Page 165
Vinyl Trims and Finishing Products
Provides clean, sharp edge at wallboard terminations.

■ Raised shoulder and perforations enhance compound adhesion.
Vinyl L-Stop Bead (VLLS) & Vinyl Rip Bead™ (VLZL)

■ Produces finished edge at panel terminations.
Dietrich™ L-Stop bead
creates a clean detail
at gypsum panel
terminations into doors, L-Stop Bead
windows and ceilings.
Easy attachment is
attained with nails, screws enhance strong compound adhesion and provide for a flush
or staples to studs finish. Rigid vinyl is rust proof, dent resistant and easy to field
through bead flange. cut without distorting profile or leaving sharp edges and burrs.
Multiple perforations along 1-1/4" flange and raised shoulder Available in 1/2" and 5/8" depths; 8' and 10' lengths.
Vinyl L-Stop Bead (VLLS)

lbs. (kg)
8 2.44 16.0 7.2 50 25
1/2 12.7
10 3.05 20.0 9.0 50 25
VLLS
8 2.44 16.0 7.2 50 25
5/8 15.9
10 3.05 20.0 9.0 50 25
Creates a clean line at intersection

of gypsum board and ceiling grid.
■ Eliminates clean up
and masking tape. Dietrich™ Vinyl Rip Bead™
■ Rust proof and Rip Bead™ Vinyl L-trim
dent resistant. produces an exceptional
■ Multiple perforations finish at intersection of gypsum panels to ceiling grid, window
enhance joint returns and dissimilar wall types. A tear-away strip on the Rip Bead™
compound Vinyl L-trim provides a protective edge and a guide for the drywall
adhesion. finishing knives. Once joint compound is applied, finished and
■ Produces clean, painted, the tear-away strip is removed to form a crisp, clean edge.
finished edges at Multiple perforations along the nailing flange enhance strong
panel terminations. compound adhesion. Available in 1/2" and 5/8" depths; 8' and 10'
lengths.
Vinyl Rip Bead™ Ceiling L-Trim (VLZL)
lbs. (kg)
8 2.44 16.0 7.2 50 35
1/2 12.7
10 3.05 20.0 9.0 50 35
VLZL
8 2.44 16.0 7.2 50 35
5/8 15.9
10 3.05 20.0 9.0 50 35

165
Dietrich04_166 3/22/04 5:03 AM Page 166
Quickly finishes doorways, knee walls and wall ends.

■ One-piece installed cost savings. Partition End Cap
Vinyl Partition End Cap 1/2" (PC50) or 5/8" (PC58) & Vinyl 093 Drywall Control Joint (VCJT)
■ Simplifies product selection.

■ Easily forms arches or curves.
■ Available for 1/2“ and 5/8“ gypsum wallboard.
Dietrich™ vinyl vinyl partition
partition end caps are
end caps designed with a
quickly finish special factory punched “T”
doorways, knee slotted flange. The “T” slots can be
walls and wall cut easily to form arches or curves.
ends by This product provides time (cost) savings through single-piece
capping the installation versus installing two corner beads.
ends of a wall You also use less compound than two corner bead
and providing applications. Multiple perforations enhance strength of joint
a finish face. compound adhesion. Easy to cut, rust proof and dent resistant.
Vinyl Partition End Cap for 1/2" Board (PC50) or 5/8" Board (PC58)
lbs. (kg)
PC50 2-1/2 63.5 8 2.44 12.5 5.7 12 25
(1/2") 3-5/8 92.1 10 3.05 15.6 7.1 12 25
PC58 2-1/2 63.5 8 2.44 12.5 5.7 10 25
(5/8") 3-5/8 92.1 10 3.05 15.6 7.1 10 25
Used to relieve expansion and contraction stresses.

■ Use with drywall or veneer plaster.
■ Moisture resistant and rust proof.
■ Maintains profile after cutting.
■ Perforations enhance compound adhesion.
093 Vinyl
Ceiling Application Control
Joint
Dietrich™ 093 vinyl control joint is applied between abutting gypsum
panels and is used to relieve stresses of expansion and contraction
of drywall in large ceiling and wall expanses over 30'. Control joints
are installed from door header to ceiling, from floor to ceiling in
long partition runs and from wall to wall in large ceiling areas.
Plastic tape protects 1/4" opening x 7/16" deep reveal and is removed
after compound is applied and finished. Where sound transmission is a
consideration, an approved seal must be provided behind control joint.
Use metal control joints wherever fire ratings are a concern. Wall Application
093 Vinyl Drywall Control Joint (VCJT)

lbs. (kg)
VCJT 3/32 2.4 10 3.05 42.0 19.0 60 25
Drywall Beads and Trims

(Paper-Faced)
Paper-Faced Metal Outside Corner,
Tape-On Bead (G1WO, G1UO, G1XW,
G1XU, G1SU) ......................................170
Paper-Faced Metal Offset Outside
Corner, Tape-On Bead (G100)......171
Paper-Faced Inside Corner Tape-On
Bead (G2I) ............................................172
Paper-Faced Off-Angle Inside Corner
Tape-On Bead (G20I) ......................173
Paper-Faced Bullnose Corner
Beads
Paper-Faced 3/4" Bullnose Outside
Corner, Tape-on Bead (G1BO)......174
Paper-Faced 3/4" Bullnose Off-Angle
Outside Corner, Tape-On Bead
(GOBO) ..................................................175
Paper-Faced 3/4" Bullnose Outside
Corner, Nail-On Bead (G1BN) ......176
Paper-Faced 3/4" Bullnose Offset
Outside Corner, Nail-On Bead
(GOOB) ..................................................177
Paper-Faced Trims and Finishing
Products
Paper-Faced Inner Cove, Tape-On Trim
(G2B1)....................................................178
Paper-Faced Metal L, Tape-On Trim
(G4L) ......................................................179
Paper-Faced Metal Reveal, Tape-On
Trim (GGR) ............................................180
167
PAPER-FACED
BEADS & TRIMS
OVERVIEW
Paper-Faced Beads & Trims Overview
Paper-faced metal beads and trims

combine galvanized metal corner
and edge protection with high-grade
paper tape to provide cost-effective,
problem-free, compound-embedded
drywall finishing. Paper-faced beads Advantages
virtually eliminate any potential for
Goldline* paper-faced products are recognized as the premier paper-faced finishing
corner and edge cracking by moving
products. Here are a few of the reasons many finishers simply demand Goldline®:
or floating with the gypsum inde-
pendent of framing movement or set- ■ Virtually impervious to scuffing and “fluffing-up.”
tling. The result is a precise, high- ■ Will not be damaged by sanding.
quality, straight and smooth finish,
free from unsightly cracks, chips and ■ Does not require nose coating.
nail pops. ■ Uniformly durable throughout the paper’s thickness.
Tape-on paper-faced beads and ■ Enhanced compound bonding during application.
trims are not fastened directly to the
■ Enhanced paintability.
framing like conventional nail-on
bead. Joint compound is applied to ■ Fewer call backs for repairs.
the underside of the paper flanges, ■ The smoothest finish available.
aligned and pressed into place. Joint
compound seeps through perforated ■ The most dimensionally stable paper in the industry.
holes in the paper to provide superi-
*Goldline® is a registered trademark of Corus CIC, Inc.
or adhesion and bonding to the gyp-
sum paper.
Nail-on paper-faced beads and trims
are also available. Nail-on trims are
used when nailing or mechanical
fastening is desired or required, but
paper facing is preferred for appli-
cation at joint treatment.
Overview
Goldline* paper-faced
metal products are avail- Laramie Drywall has builders
able in a wide variety of
profiles. The 90˚ outside that demand paper-faced
corners have a number
of different metal and
corner bead. Dietrich’s Goldline®
Paper-Faced Beads & Trims Overview

paper widths that reflect
the demand of a specific
bead is our product of choice.
market or application. Goldline® doesn't ball, nap or
Wide flanged beads are
used when finishers fuzz when sanded. Goldline®
want a product that will
cover an imperfect drywall corner (drywall stops short of cor- means a better job for the
ner, crooked house wall, etc.). Splayed angle outside corners
are available to accommodate 120˚/135˚ corners. owner and less call backs for
Inside metal corners are
available for both 90˚
us. The bottom line is a win–win
and 120˚/135˚. The for everyone.
same profile angles for
both outside and inside — Wil Laramie
corners are available in Laramie Drywall Company
3/4" radius bullnose as
St. Charles, MO
well. L-trims are also
available in a wide range
of sizes. These products
are used to trim wall-
board where it abuts
with other building components such as suspended ceilings,
beams, concrete or untrimmed door and window jambs.
*Goldline® is a registered trademark of Corus CIC, Inc.

169
Dietrich04_170&171 3/22/04 5:05 AM Page 170
Superior 90˚ outside corner drywall finishing tape-on bead

eliminates unsightly corner cracks, chips and nail pops.
■ Virtually eliminates costly callbacks.
Paper-Faced Metal Outside Corner, Tape-On Bead (G1WO, G1UO, G1XW, G1XU, G1SU)
■ Substantially reduces joint compound consumption and eliminates one finish coat.
■ Does not require mechanical fastening (no nails, staples, screws or crimps).
■ Impervious to “scuffing” and “fluffing-up.”
■ Will not be damaged by sanding.
■ Superior adhesion, bonding and paintability.
■ Does not require nose coating.
Extra Wide Leg
Standard Leg
Goldline* paper-faced tape-on beads combine galvanized metal corner and edge protection
with high-grade paper tape to provide cost-effective, problem-free outside drywall corner
finishing. Paper-faced beads are available in a number of different widths to suit most
wallboard applications. Wider flange beads are used to cover imperfect corners, while
shorter flanges are used to achieve maximum efficiency.
Paper-faced beads virtually eliminate corner cracks, edge chips and nail pops. These beads
are applied using joint compound that embeds the paper bead to the wallboard paper. No
mechanical fasteners like nails, screws, staples or crimps are used. Although paper-faced beads
do cost more compared to traditional metal and vinyl, they provide reduced labor and materials
by reducing the amount of joint compound needed and also eliminate one pass of finishing.
Paper-Faced Metal U.S. Patent Nos. 5,613,335

and 5,836,122
Outside Corner,
Tape-On Bead
DMF Dimensions (Inches) Weight/Carton Packaging
USG
Product Style
Reference A B C D lbs. (kg) Pcs/Box Boxes/Skid
Code
G1WO B1W Standard Leg 1/2 3/4 7/8 7/8 40.0 18.1 50 40
G1UO B1EL Equal Leg 3/4 3/4 3/4 3/4 46.0 20.8 50 40
G1XW B1XW Extra Wide 7/8 5/8 5/8 3/4 46.0 20.8 50 40
G1XU B1XW EL Extra Wide Equal 7/8 7/8 5/8 5/8 53.0 24.0 50 40
G1SU B1 Super Wide Super Wide Equal 1-1/8 1-1/8 5/8 5/8 66.0 29.9 50 40
All carton weights are calculated based on 10' lengths.
Standard lengths are 8', 9' and 10'. Other lengths available.
*Goldline is a registered trademark of Corus CIC Inc.
Dietrich Metal Framing does not manufacture, license or sell products sold under the USG/Beadex product codes
and that such codes are listed for cross reference/comparison purposes only.
Dietrich04_170&171 3/22/04 5:06 AM Page 171
Drywall Beads and Trims (Paper-Faced)
High-performance off-angle tape-on bead is

ideal for finishing 120˚/135˚ offset corners.
Paper-Faced Metal Offset Outside Corner, Tape-On Bead (G100)

■ Substantially reduces joint compound consumption
and eliminates one finish coat.
■ Does not require mechanical fastening
(no nails, staples, screws or crimps).
■ Does not require nose coating. Splayed Bead
Goldline* off-angle tape-on bead, also known as splayed or

120/135˚ corner bead, is used to provide a strong, smooth
finish for outside off-angle drywall intersections. Paper-faced
tape-on off-angle bead is applied in the same manner as 90˚
paper bead. Joint compound is used to embed the paper-
faced bead to the wallboard paper. The result is a clean,
crisp, durable off- angle corner that will not crack or chip.
U.S. Patent Nos. 5,613,335 and 5,836,122
Paper-Faced Metal
Off-Angle Outside Corner,
Tape-On Bead (G100)
USG
Product Style
Reference A B C D lbs. (kg) Pcs./Box Boxes/Skid
Code
G100 B1 OS Off-Angle 1/2 3/4 5/8 5/8 40.0 18.1 50 40

171
Dietrich04_172&173 3/22/04 5:08 AM Page 172
Provides incredibly straight and smooth inside

90˚ corners for drywall finishing.
Paper-Faced Inside Corner Tape-On Bead (G2I)

(no nails, staples, screws or crimps). Inside Corner

Goldline* tape-on inside 90˚ paper-faced corner bead

provides very straight and precise inside corners. The rigid
steel-reinforced inside corners provide a durable guide to
achieve exceptionally straight and sharp inside corners.
Paper-faced inside corners are embedded in joint
compound and pressed firmly into place. Excess
compound is removed with a drywall knife.
U.S. Patent Nos. 5,613,335 and 5,836,122
Paper-Faced
Inside Corner
Tape-On Bead (G2I)
USG
Product Style
Code
G2I B2 Standard Angle 3/8 3/8 5/8 5/8 26.0 11.8 50 40
Dietrich04_172&173 3/22/04 5:09 AM Page 173
Drywall Beads and Trims (Paper-Faced)
Used to create a sharp, crisp line for finishing

inside off-angle or inverted splayed corners.
Paper-Faced Off-Angle Inside Corner Tape-On Bead (G20I)

(no nails, staples, screws or crimps).
Inside Splayed
■ Does not require nose coating. Corner
Goldline* off-angle tape-on 120/135˚ inside or reverse

splayed bead is used to achieve a crisp, clean, straight-
finished inside off-angle drywall finish. This bead can be used
for inside corner angles between 120˚ and 135˚. As with all
tape-on beads, off-angle bead is applied using joint
compound. No mechanical fasteners are required.
U.S. Patent Nos. 5,613,335 and 5,836,122
Paper-Faced Metal
Off-Angle Inside Corner
Tape-On Bead (G20I)
USG
Product Style
Code
G20I B2 OS Off-Angle 5/8 5/8 5/8 5/8 45.0 20.4 50 40

173
Dietrich04_174-175 3/22/04 5:10 AM Page 174
Creates elegant, rounded outside drywall corners adding

contemporary styling and a sense of openness to any room.
Paper-Faced 3/4" Bullnose Outside Corner, Tape-On Bead (G1BO)
■ Impervious to “scuffing” and “fluffing-up.” Tape-on Bullnose

(No nails, staples, screws or crimps).
Gypsum board
panels must be
cut back 3/4" to
accommodate
the bullnose
radius and
ensure a flush fit.
Goldline* 3/4" tape-on bullnose corner bead is used to

create a smooth, rounded look to standard drywall corners.
Paper-faced bullnose bead adds contemporary styling and
a sense of openness to any room. Tape-on bullnose is
applied in the same manner as all other tape-on beads.
Joint compound is used to embed the paper-faced bead
to the wallboard paper. The result is a beautiful, rounded
corner that will not crack or chip.
U.S. Patent Nos. 5,613,335 and 5,836,122
Paper-Faced 3/4 Bullnose

Outside Corner,
Tape-On Bead (G1BO)
USG
Product Style
Reference A B C lbs. (kg) Pcs./Box Boxes/Skid
Code
G1BO SLOC Standard 7/8 3/4 7/8 53.0 24.0 50 40
Standard lengths are 8', 10'. Other lengths available.
Dietrich04_174-175 3/22/04 5:12 AM Page 175
Paper-Faced Bullnose Corner Beads
Offset bullnose provides rounded 120˚–135˚ outside

drywall corners for a contemporary “modern“ look.
Paper-Faced 3/4" Bullnose Off-Angle Outside Corner, Tape-On Bead (GOBO)

■ Superior adhesion, bonding and paintability. Splayed Bullnose
Goldline* off-angle bullnose tape-on bead, also known as Gypsum board panels must be cut back 3/4" to
splayed bullnose or 120/135˚ bullnose corner bead is used accommodate the bullnose radius and ensure a flush fit.
to provide a rounded, bullnose finish for off-angle drywall
intersections. Paper-faced tape-on off-angle bullnose bead
is applied in the same manner as 90˚ paper bead. Joint
compound is used to embed the paper- faced bead to the
wallboard paper. The result is a clean, crisp, rounded
off-angle corner that will not crack or chip.
U.S. Patent Nos. 5,613,335 and 5,836,122
Paper-Faced 3/4 Bullnose Off-Angle

Outside Corner, Tape-On Bead (GOBO)
USG
Product Style
Code
G0BO SLOC OS Off-Angle 1 3/4 1 53.0 24.0 50 40

175
Dietrich04_176-177 3/22/04 5:13 AM Page 176
Provides the same elegant and contemporary rounded

drywall corners as tape-on and is used when nailing or
mechanical fastening is desired.
Paper-Faced 3/4" Bullnose Outside Corner, Nail-On Bead (G1BN)

■ Substantially reduces joint compound
consumption and eliminates one finish coat.
Nail-On Bullnose

Goldline* 3/4" nail-on bullnose corner bead is used to Nail-on bead is applied in the same manner as traditional
create a smooth, rounded look to standard drywall corners. metal and vinyl beads. Nails or mechanical fasteners are
Nail-on bullnose adds contemporary styling and a sense of used to secure the bead to the wallboard. Wide flange
openness to any room. nail-on-bullnose is also available.
U.S. Patent Nos. 5,613,335 and 5,836,122

Outside Corner,
Nail-On Bead (G1BN)
USG
Product Style
Code
G1BN SLOC N Standard 5/8 3/4 5/8 72.0 32.6 50 40
Dietrich04_176-177 3/22/04 5:15 AM Page 177
Paper-Faced Bullnose Corner Beads
Nail-on offset bullnose is used to provide

rounded 120˚–135˚ outside drywall corners
when nailing or mechanical fastening
is desired or required.
Paper-Faced 3/4" Bullnose Offset Outside Corner, Nail-On Bead (GOOB)

■ Impervious to "scuffing" and "fluffing-up".
Nail-On Splayed

Goldline* off-angle nail-on bullnose bead, also known as

splayed bullnose or 120˚–135˚ bullnose corner bead, is used
to provide a rounded bullnose finish for outside off-angle
drywall intersections.
Off-angle nail-on bead is applied in the same manner as
traditional or vinyl off-angle bullnose. Nails or mechanical
fasteners are used to secure the bead to the wallboard.
U.S. Patent Nos. 5,613,335 and 5,836,122

Offset Outside Corner,
Nail-On Bead (GOOB)
USG
Product Style
Code
G00B SLOC NOS Off-Angle 5/8 3/4 5/8 68.0 30.8 50 40

177
Dietrich04_178-179 3/22/04 5:16 AM Page 178
Creates subtle, smooth, rounded inside

or inner cove corners.
Paper-Faced Inner Cove, Tape-On Trim (G2BI)
■ Impervious to “scuffing“ and “fluffing-up.“

■ Does not require mechanical fastening Inner Cove Tape-On
Goldline* tape-on inner cove 90˚ paper-faced bead

provides subtle, rounded inside or inner corners. Inner
cove tape on beads are embedded in joint compound and
pressed firmly into place. Excess compound is removed
with a drywall knife or wiped clean with a rag.
U.S. Patent Nos. 5,613,335 and 5,836,122
Paper-Faced Inner Cove,

Tape-On Trim (G2BI)
USG
Product Style
Code
G2BI SLIC Standard 5/8 3/4 5/8 53.0 24.0 50 40
Dietrich04_178-179 3/22/04 5:17 AM Page 179
Paper-Faced Trims and Finishing Products
Protects and finishes wallboard edge

when gypsum panels abut
dissimilar surfaces.
Paper-Faced Metal L, Tape-On Trim (G4L)

■ Substantially reduces joint compound consumption and
eliminates one finish coat.
■ Does not require mechanical fastening (No nails, staples,
screws or crimps).
L-Trim
Goldline* L-Trims are used to finish the ends of wallboard

where it abuts dissimilar surfaces such as suspended ceilings,
beams, plaster, masonry or untrimmed door and window
jambs. Tape-on L-Trims are applied in the same manner as all
other tape-on beads. Joint compound is used to embed the
paper-faced bead to the wallboard paper. Excess compound
can be removed with a drywall knife or clean rag.
U.S. Patent Nos. 5,613,335 and 5,836,122
Paper-Faced Metal L,
Tape-On Trim (G4L)
USG
Product Style
Code
B4 3/8 7/16 1-11/16 1-1/4 40.0 18.1 50 40
G4L B4 1/2 9/16 15/16 1-1/4 42.0 19.0 50 40
B4 5/8 11/16 1-1/16 1 44.0 19.9 50 40

179
Dietrich04_180 3/22/04 5:19 AM Page 180
Used to create gentle insets or step-ins for

aesthetically pleasing architectural detailing.
■ Also known as “race track” bead.
Paper-Faced Metal Reveal, Tape-On Trim (GGR)

■ Substantially reduces joint compound
consumption and eliminates one finish coat.
Paper-Faced Reveal
Goldline* reveal trims are used to finish wallboard

terminations when the board abuts other building
materials such as suspended ceilings, beams, plaster,
masonry and untrimmed door and window jambs to create
a clean step inset or reveal. Reveals help create subtle,
aesthetic architectural detailing around light fixtures,
ceilings, walls and soffits.
Paper-faced tape-on reveals are installed using joint
compound to embed the reveal and secure it to the
wallboard. No mechanical fasteners are required.
U.S. Patent Nos. 5,613,335 and 5,836,122
Paper Faced Metal Reveal,

Tape-On Trim (GGR)
USG
Product Style
Code
B4 NB Reveal (1/2") 1/2 x 1/2 1/2 1/2 1-3/16 7/8 40.0 18.1 50 40
GGR
B4 NB Reveal (5/8") 5/8 x 5/8 5/8 5/8 15/16 7/8 40.0 18.1 50 40
Veneer Beads and Trims

Mini-Bead™ 800/900
Galvanized (MB80/MB90)
Zinc (ZB80/ZB90)..............................184
093 Zinc Control Joint (ZNCJ) ......185
#701A Metal J-Trim with 3/32
Grounds (M71A/Z71A) and with
1/16 Grounds (M81A/Z81A) ........186
#701B Metal L-Trim with 3/32
Grounds (M71B/Z71B) and with
1/16 Grounds (M81B/Z81B) ........187
Stucco and Plaster Casing Beads
1A Expanded Flange Corner Bead—
Galvanized (CBXA), Zinc (CBZA) ..188
Double-X™ Corner Bead—
Galvanized (CBXX) ............................189
Strip Lath (LAST) ................................190
Cornerite™ (XRIT) ................................191
#66 Expanded Flange Casing Bead—
Galvanized (XXCB), Zinc (XXZB) ..192
#66 Expanded Flange
Casing Bead with Weep Holes—
Galvanized (XXCW), Zinc (XXZW) ..193
#66 N Short Flange Casing Bead—
Galvanized (SFCB), Zinc (SFZB)....194
#66 N Short Flange Casing Bead
with Weep Holes—
Galvanized (SFWB) ............................195
Stucco and Plaster Control Joints
Corner Master™ #30 (CR30) ..........196
Zinc Control Joints
38 (ZCJ3), 50 (ZCJ5),
75 (ZCJ7), 100 (ZCJ1) ....................197
Double-V Expansion Control Joint—
Galvanized (VVCJ), Zinc (VVZJ) ....198
Double-J Expansion Control Joint—
Galvanized (XJ15), Zinc (ZJ15) ....199
Shallow-V E.I.F.S.
Expansion Joint (KESV) ....................200
Deep-V E.I.F.S.
Expansion Joint (KEDV)....................200
Expansion Joint #40—Galvanized
(EJ40), Zinc (EZ40) ..........................201
Stucco, Screeds and Exterior
Finishing Products
F.H.A.7. Foundation Screed
(FHA7) ....................................................202
7/8" Sill Screed (SI36) ....................202
1-3/8" J-Weep
with 2" Nailing Flange (JCLB),
with Weep Holes (JWLB) ................203
J-Weep High-Back
Plaster Stop (JWP)..............................204
181
Advantages
VENEER, Strength—Veneer and plaster are used to cre-
STUCCO & ate strong, durable finishes resistant to scuffs,
gouges, dents and abrasions.
PLASTER Superior Finish—Expanded mesh and rigid
Veneer, Stucco & Plaster Beads & Trims Overview
BEADS & TRIMS pronounced edges provide excellent keying

and exacting grounds for superior bonding and
OVERVIEW finishing to minimize cracks and shadowing.
Corrosion Resistant—Galvanized or Zinc for
Veneer Plaster continues to grow in maximum corrosion protection. Zinc products
popularity as a wall finishing system. should be used in exterior applications.
The speed of application for one-coat
systems makes it competitive with
drywall, and the added smoothness As the largest specialty wallboard, metal, and
of two-coat veneer provides a look of
luxury and adds ease to decorating. ceilings distributor in the United States, servicing
In either case, the toughness of
veneer plaster makes walls more
the needs of commercial contractors from coast to
durable and resistant to scuffs, coast, L&W Supply looks to Dietrich Metal Framing
gouges and impact damage.
as a key vendor to supply a broad metal framing
Having the right metal trims, control
joints and corner reinforcements is and accessory product offering, satisfying our cus-
an integral part of the wall system’s
appearance and long-term perform-
tomers’ job requirements in a timely manner. And,
ance. That’s why Dietrich Metal they have been doing that for over 20 years.
Framing takes such care in the man-
ufacturing of these components. Our — Michael C. Lorimer
history in the manufacturing of President, Chief Operating Officer
metal lath and accessories for con- L&W Supply Corporation
ventional plaster gives us unique
knowledge of this growing trade and
the product quality that is required
to do the job right.
Overview
Styles & Types Dietrich™ #66 Short

Flange Casing Beads
Veneer Corner Beads are used as a universal
are designed to protect plaster stop at door and
interior corners and window openings, wall
to establish suitable terminations and inter-
Veneer, Stucco & Plaster Brads & Trims Overview

grounds for veneer sections.
finishes.
Control & Expansion
Veneer Trims 701A Joints are used in large
and 801A are J-shaped uninterrupted plastered
trims that come in differ- areas to relieve stress
ent depths and grounds to accommodate veneer finishes. and minimize cracking.
Sized to fit 1/2" and 5/8" gypsum plaster base, 701A grounds
are 3/32" for two-coat veneer and 801A grounds are 1/16" for Fo u n d a t i o n We e p
one-coat veneer plaster. Also available in zinc for cement Screeds protect the
board applications. stop edges of stucco at
the sill plate line. Holes
Veneer Trims 701B and 801B are L-shaped trims designed in the flange allow some
for use at the junction of veneer gypsum board base with weeping, but the angular
rough concrete or masonry ceilings. They are sized to fit 1/2" surface of the bead is
and 5/8" gypsum board plaster base. 701B grounds are 3/32" designed to facilitate the
for two-coat veneer, and 801B grounds are 1/16" for one-coat egress of moisture
veneer plaster. Use zinc finish for exterior applications. behind the cementitious
membrane.
Expanded Corner Beads are designed to protect outside
corners and to establish suitable grounds for plaster and stuc- 1-3/8" J-Weep is primarily used as a starter track at the bot-
co finishes. tom of the wall for 3/8" one-coat stucco over 1" foam.
Cornerite should be used on interior corner angles where Mini-Bead™ 900 Zinc is a zinc bead used for external corner
the lath has been spliced or where additional reinforcement is reinforcements. It has 1-1/4" wide fine-mesh expanded flanges
desired. It should be wire tied to the lath using 18-gauge wire. tapered along outer edges for improved concealment and eas-
ier finishing with EIFS basecoats and finishes.
Strip Lath is a flat expanded metal strip used as plaster rein-
forcement over joints of non-metallic lathing bases and where NOTE: Dietrich Metal Framing recommends the use of zinc
dissimilar bases join. It’s commonly attached diagonally at the or vinyl for all exterior applications.
corners of doors, windows or areas prone to cracks.
CAUTION: Joints and corners are a potential point of water
Expanded Flange Casing Beads are used to ensure the intrusion. Dietrich strongly recommends building paper be
proper stucco thickness. They are recommended for use with placed behind all joints and corners. Also, a bead of high-
metal lath and masonry units. quality caulking should be applied under the joints prior to
the attachment of the materials.

183
Dietrich04_184&185 3/22/04 2:10 AM Page 184
Corner reinforcement for one- and two-coat

veneer “thin wall” plaster systems.
■ Mini-mesh flanges for plaster keying and eliminates shadowing.
Mini-Bead™ 800/900 Galvanized (MB80/MB90) Zinc (ZB80/ZB90)
■ Galvanized or zinc for corrosion protection.

■ Excellent alternative to Kal-Korner.
Dietrich™ Mini-Bead™ 800/900 are fine-mesh corner beads
Mini-Bead™
used to provide corner reinforcement for one- and two-
coat veneer plaster systems. 1-1/4" wide fine-mesh flanges
are tapered along the outer edges to enhance veneer
plaster concealment. MB80 has 1/16" grounds for one-coat
veneer plaster and 90 keys per linear foot for excellent
bonding and strong, secure corners. MB90 has 3/32"
grounds associated with two-coat veneer plaster systems.
Zinc Mini-Bead™ (ZB90) corner beads should be used in
exterior finish systems. Flange attachments can be
accomplished by nailing, stapling or clinching.
Kal-Korner* is no longer
available from Dietrich
Metal Framing. Mini-
Bead is a recognized
alternative.
Mini-Bead™ 800/900 Galvanized (MB80/MB90) Zinc (ZB80/ZB90)

Product Grounds Width Length Pcs./ Carton/
lbs. (kg)
MB80 1/16" 1-1/4 31.8 8 2.44 33.6 15.2 60 25
MB90 3/32" 1-1/4 31.8 10 3.05 42.0 19.0 60 25
ZB80** 1/16" 1-1/4 31.8 10 3.05 29.9 13.5 60 25
ZB90** 3/32" 1-1/4 31.8 10 3.05 37.3 16.9 60 25
* Kal-Korner is a registered trademark of National Gypsum Company.

** Zinc
Dietrich04_184&185 3/22/04 2:12 AM Page 185
Relieves stresses of expansion and contraction across

large ceiling and wall areas.

■ Superior corrosion resistance.
■ Use with drywall veneer plaster.
Dietrich™
Zinc Control Joint
093 Drywall
Control Joint
is applied
between
abutting
gypsum panels
and used to
relieve stresses
of expansion
and
contraction of drywall and veneer plaster systems in wall
expanses over 30 feet and ceiling areas exceeding 2,500
square feet. It’s installed from door header to ceiling, from
floor to ceiling in long partition runs, and from wall to wall
in large ceiling areas or in areas where framing or furring
change direction. Plastic tape protects 1/4" opening, 7/16"
depth, and is removed after compound or plaster is applied
and finish is completed.
Zinc Control Joints are manufactured from high-quality pure
zinc and can be used for interior or exterior applications.
NOTE: Where fire and sound control are prime
considerations, a seal must be attached behind
the control joint.
093 Drywall Control Joint (ZNCJ)

Product Grounds Length Pcs./ Carton/
lbs. (kg)
ZNCJ 3/32 2.4 10 3.05 22.5 10.2 25 64

185
Dietrich04_186&187 3/22/04 2:14 AM Page 186
Provides clean, neat edge protection at gypsum panel

terminations for one- and two-coat veneer plaster finishes.
■ Mini-mesh flanges for plaster keying.
#701A Metal J-Trim with 3/32 Grounds (M71A/Z71A) and with 1/16 Grounds (M81A/Z81A)
■ Eliminates shadowing.
■ Galvanized coated or zinc
for corrosion protection.
Dietrich™ veneer
trims M71A and M81A
are J-shaped trims
formed from
galvanized steel to fit J-Trim
standard 1/2" and
5/8" gypsum panel
depths with grounds
to accommodate
veneer finishes.
These trims provide
clean, neat edge
protection for one- or
two-coat veneer
plaster finishes at gypsum panel terminations to wall
openings and wall or ceiling intersections. M71A provides
3/32" grounds for two-coat veneers and M81A has 1/16"
grounds for one-coat veneer plaster.
Dietrich™ Z71A and Z81A veneer trims are the zinc
equivalents of M71A and M81A with the added benefit of
providing ultimate corrosion protection for cement board
and exterior applications. These trims provide clean, neat
edge protection at wall or ceiling intersections, or wall
terminations for one- and two-coat veneer plaster systems.
#701A Metal J with 3/32 Grounds (M71A, Z71A), with 1/16 Grounds (M81A, Z81A) Galvanized and Zinc
lbs. (kg)
8 2.44 32.0 14.5 50 40
1/2 12.7
10 3.05 32.0 14.5 50 40
M71A 3/32"
8 2.44 32.0 14.5 50 40
5/8 15.9
10 3.05 32.0 14.5 50 40
8 2.44 36.0 16.3 50 40
1/2 12.7
10 3.05 36.0 16.3 50 40
M81A 1/16"
8 2.44 36.0 16.3 50 40
5/8 15.9
10 3.05 36.0 16.3 50 40
1/2 12.7 10 3.05 28.4 12.9 50 40
Z71A* 3/32"
5/8 15.9 10 3.05 28.4 12.9 50 40
1/2 12.7 10 3.05 32.0 14.5 50 40
Z81A* 1/16"
5/8 15.9 10 3.05 32.0 14.5 50 40
*Zinc.
Dietrich04_186&187 3/22/04 2:15 AM Page 187
Applied after panel installation to finish veneer plaster

edges at wall terminations.
■ Mini-mesh flanges for keying.
#701B Metal L-Trim with 3/32 Grounds (M71B/Z71B) and with 1/16 Grounds (M81B/Z81B)
■ Eliminates shadowing.
■ Galvanized coated or zinc for corrosion protection.
Dietrich™ veneer
trims M71B
L-Trim
and M81B are
L-shaped trims
designed for use
at junctions of
veneer gypsum
base with rough
concrete or
masonry ceilings.
Sized to fit 1/2"
and 5/8" gypsum
plaster base,
M71B provides
3/32" grounds for
two-coat veneer,
and M81B has
1/16" grounds for one-coat veneer plaster. Available in
standard length of 8' and 10'.
Dietrich™ Z71B and Z81B veneer trims are the zinc
equivalents of M71B and M81B with the added benefit
of providing ultimate corrosion protection for exterior
applications. Available in standard length of 10'.
#701B Metal L with 3/32 Grounds (M71B, Z71B), with 1/16 Grounds (M81B, Z81B) Galvanized and Zinc
lbs. (kg)
8 2.44 32.0 14.5 50 60
1/2 12.7
10 3.05 32.0 14.5 50 60
M71B 3/32"
8 2.44 32.0 14.5 50 60
5/8 15.9
10 3.05 32.0 14.5 50 60
8 2.44 36.0 16.3 50 60
1/2 12.7
10 3.05 36.0 16.3 50 60
M81B 1/16"
8 2.44 36.0 16.3 50 60
5/8 15.9
10 3.05 36.0 16.3 50 60
1/2 12.7 10 3.05 28.4 12.9 50 60
Z71B* 3/32"
5/8 15.9 10 3.05 28.4 12.9 50 60
1/2 12.7 10 3.05 32.0 14.5 50 60
Z81B* 1/16"
5/8 15.9 10 3.05 32.0 14.5 50 60
*Zinc.

187
Dietrich04_188&189 3/22/04 2:17 AM Page 188
Strong, expanded flange mesh corner

reinforcement for conventional plaster
and fireproofing applications.
1A Expanded Flange Corner Bead—Galvanized (CBXA), Zinc (CBZA)
■ Solid bead nose enhances rigidity and straight corners.

■ Preferred for irregular corners.
Expanded Flange
Corner Bead
Dietrich™ 1A expanded corner bead is used to provide

strong corner reinforcement for conventional plaster
applications. A solid metal nose provides a straight, rigid
ground for screeding and the 2-7/8" or 3" flanges can be
flexed easily over irregular, uneven surfaces. Plaster keys
near the solid nose provide increased reinforcement where
needed and ensures straight corners. Available in 8' and 10'
lengths in galvanized, and 10' lengths in zinc. Zinc is
recommended for interior high-moisture exposure areas
and exterior plaster applications.
1A Expanded Flange Corner Bead—Galvanized (CBXA), Zinc (CBZA)

Product Width Length Pcs./ Carton/
lbs. (kg)
8 2.44 51.2 23.2 40 48
2-7/8 73.0
10 3.05 48.0 21.7 30 45
CBXA
8 2.44 51.2 23.2 40 48
3 76.2
10 3.05 48.0 21.7 30 45
2-7/8 73.0 10 3.05 42.7 19.3 30 48
CBZA*
3 76.2 10 3.05 42.7 19.3 30 48
*Zinc.
Dietrich04_188&189 3/22/04 2:19 AM Page 189
Wider flanges and perforated stiffening

ribs provide superior corner reinforcement
for plaster applications.
Double-X™ Corner Bead—Galvanized (CBXX)

■ Stiffening ribs along expanded flanges for additional rigidity.
■ Effective corner alignment.
Double-X™
Corner Bead
Dietrich™ Double-X™ or 2A corner bead provides additional

rigidity for reinforcing plaster corners. Easily adjusts to set
plaster depth on columns and is ideal for finishing corners of
structural tile with rough masonry. Combination of expanded
flanges and pronounced bead nose ensures effective corner
alignment and efficient plaster keying from edge to nose.
Manufactured with full 3-1/4" flanges and perforated
stiffening ribs.
Double-X™ Corner Bead—Galvanized (CBXX)

lbs. (kg)
CBXX 3-1/4 82.6 10 3.05 76.0 34.4 30 25

189
Dietrich04_190&191 3/22/04 2:21 AM Page 190
Expanded metal strip for general plaster reinforcement.

■ Finished edges for safe handling.
Strip Lath (LAST)
Strip Lath
Dietrich™ strip lath is a flat expanded metal strip used as

plaster reinforcement over joints of non-metallic lathing
bases and where dissimilar bases join. It’s commonly
attached diagonally at the corners of doors, windows or
areas prone to cracks. May also be used to span pipe chases
or reinforce other stress points within the lath system.
Available in 4" and 6" widths and 8' lengths.
Strip Lath (LAST)

lbs. (kg)
LAST 4 102 8 2.44 60.0 27.1 75 18
LAST 6 152 8 2.44 78.0 35.3 75 18
Dietrich04_190&191 3/22/04 2:22 AM Page 191
Expanded metal lath angle

for inside or inner plaster corners
and used to reduce corner cracks.
Cornerite™ (XRIT)
Cornerite™
Dietrich™ Cornerite™ reinforcing angle is used to reinforce

all inside or inner plaster corners to reduce corner cracking.
Cornerite™ reinforcing angle is formed from finished edge
strip lath and bent lengthwise to a 100° angle ensuring a
snug fit into 90° corners. It’s commonly used when walls
meet walls or ceilings, over inner angles of masonry
construction and in the floating angle method of applying
gypsum lath to wood framing in order to reduce plaster
cracking.
Dietrich Cornerite™ reinforcing angle should be tied to the
base lath using 18-gauge tie wire. Cornerite should not be
attached directly to support framing, but allowed to float
in the corner. Available in 2" x 2" in 4' and 8' lengths,
and 3" x 3" in 8' length only.
Cornerite™ Reinforcing Angle (XRIT)

lbs. (kg)
2x2 50.8 x 50.8 4 1.22 30 13.6 125 20
XRIT 2x2 50.8 x 50.8 8 2.44 60 27.2 75 18
3x3 76.2 x 76.2 8 2.44 78 35.4 75 18

191
Dietrich04_192&193 3/22/04 2:24 AM Page 192
Universal plaster stop used at door and window

openings, wall terminations and intersections.
■ Used with stucco applications starting at 3/8” thick.
#66 Expanded Flange Casing Bead—Galvanized (XXCB), Zinc (XXZB)
■ Available in galvanized and zinc for corrosion

resistance.
■ Eliminates the need for expensive wood trims.
Dietrich™ #66
expanded
flange casing
beads are used
as a plaster
stop, an #66 Expanded
exposed trim Flange Casing Bead
around wall
openings and
at junctions or
intersections
of plaster and
other wall or
ceiling
finishes. Extra-
long expanded flange for tie on applications. Short 90˚
return flange at plaster surface ensures a neat finish.
Commonly applied under metal lath. Also used with
gypsum lath, plaster board, plaster bases or masonry
construction. X66 casing bead protects edges from damage,
and covers shrinkage cracks that occur at stucco
termination within the lip of the bead.
#66 Expanded Flange Casing Bead—Galvanized (XXCB), Zinc (XXZB)

Product Length Pcs./ Cartons/
Grounds Weep Hole lbs. (kg)
Code ft. (m) Box Skid
3/8" 10 3.05 None 39.0 17.6 30 40
1/2" 10 3.05 None 42.0 19.0 30 40
5/8" 10 3.05 None 42.0 19.0 30 40
XXCB 3/4" 10 3.05 None 45.0 20.4 30 40
7/8" 10 3.05 None 48.0 21.7 30 40
1" 10 3.05 None 51.0 23.1 30 40
1-1/4" 10 3.05 None 54.0 24.4 30 40
3/8" 10 3.05 None 34.7 15.7 30 40
1/2" 10 3.05 None 37.3 16.9 30 40
5/8" 10 3.05 None 37.3 16.9 30 40
XXZB* 3/4" 10 3.05 None 40.0 18.1 30 40
7/8" 10 3.05 None 42.7 19.3 30 40
1" 10 3.05 None 45.3 20.5 30 40
1-1/4" 10 3.05 None 48.0 21.7 30 40
*Zinc.
Dietrich04_192&193 3/22/04 2:26 AM Page 193
Casing or plaster stop with weep holes to allow water

drainage in selected one-coat plaster systems.
■ Available in galvanized and zinc.
#66 Expanded Flange Casing Bead with Weep Holes—Galvanized (XXCW), Zinc (XXZW)
■ Resists corrosion.
Designed for
use with select,
tested and
approved one- #66 Casing Bead
with Weep Holes
coat plaster
systems, this
version of the
#66 Expanded
Flange Casing
Bead includes
weep holes
for moisture
dissipation.
Expanded
flange is 3-1/8"
wide to aid plaster keying. NOTE: It is important to
remember that casing beads with weep holes punched in
the ground flange are for tested and approved one-coat
systems. No other applications are implied or suggested.
Available in galvanized steel or zinc. Zinc is recommended for
exterior applications.
#66 Expanded Flange Casing Bead with Weep Hole—Galvanized (XXCW), Zinc (XXZW)
Code ft. (m) Box Skid
3/8" 10 3.05 Yes 27.0 12.2 30 40
1/2" 10 3.05 Yes 30.0 13.6 30 40
5/8" 10 3.05 Yes 30.0 13.6 30 40
XXCW 3/4" 10 3.05 Yes 33.0 14.9 30 40
7/8" 10 3.05 Yes 33.0 14.9 30 40
1" 10 3.05 Yes 36.0 16.3 30 40
1-1/4" 10 3.05 Yes 39.0 17.6 30 40
3/8" 10 3.05 Yes 24.0 10.9 30 40
1/2" 10 3.05 Yes 26.7 12.1 30 40
5/8" 10 3.05 Yes 26.7 12.1 30 40
XXZW* 3/4" 10 3.05 Yes 29.3 13.3 30 40
7/8" 10 3.05 Yes 29.3 13.3 30 40
1" 10 3.05 Yes 32.0 14.5 30 40
1-1/4" 10 3.05 Yes 34.7 15.7 30 40
*Zinc.

193
Dietrich04_194&195 3/22/04 2:27 AM Page 194
All-purpose solid flange casing plaster stop.

■ Available in galvanized and zinc for corrosion resistance.
■ Eliminates the need for expensive wood trims.
#66 N Short Flange Casing Bead—Galvanized (SFCB), Zinc (SFZB)
#66 N Short Flange Casing Bead
Dietrich™ #66 N short flange casing beads are used as

plaster stops, as exposed trim around wall openings and
junctions, or at intersections of plaster and other wall or
ceiling finishes. These casing beads are recommended for
gypsum plaster bases. Perforated 1-1/4" nailing flange aids
attachment and plaster keying. Short flange 7/8" beads are
recommended when flange is applied under gypsum lath
plaster base, and short flange 1/2" beads when flange is
applied over gypsum lath plaster base. Zinc is
recommended for exterior applications.
#66 N Short Flange Casing Bead—Galvanized (SFCB), Zinc (SFZB)

Code ft. (m) Carton Skid
3/8" 10 3.05 No 33.0 14.9 30 30
1/2" 10 3.05 No 39.0 17.6 30 30
5/8" 10 3.05 No 39.0 17.6 30 30
SFCB 3/4" 10 3.05 No 42.0 19.0 30 30
7/8" 10 3.05 No 45.0 20.4 30 30
1" 10 3.05 No 48.0 21.7 30 30
1-1/4" 10 3.05 No 54.0 24.4 30 30
3/8" 10 3.05 No 29.3 13.3 30 30
1/2" 10 3.05 No 34.7 15.7 30 30
SFZB*
3/4" 10 3.05 No 37.3 16.9 30 30
7/8" 10 3.05 No 40.0 18.1 30 30
*Zinc.
Dietrich04_194&195 3/22/04 2:29 AM Page 195
Used with selected one-coat plaster systems.

Weep holes for water drainage.
■ Available in galvanized and zinc for corrosion resistance.
#66 N Short Flange Casing Bead with Weep Holes—Galvanized (SFWB)

#66 N Casing Bead

with Weep Holes
This Dietrich™ #66 N short flange casing bead has the same
uses as the #66 expanded flange casing beads associated
with select one-coat systems but it has weep holes. The weep
holes are added for moisture dissipation. Perforated 1-1/4"
nailing flange aids attachment and plaster keying. NOTE: It is
important to remember that casing beads with weep
holes punched in the ground flange are for tested and
approved one-coat systems. No other applications
are implied or suggested.
#66 N Short Flange Casing Bead with Weep Holes—Galvanized (SFWB)

Code ft. (m) Carton Skid
3/8" 10 3.05 Yes 33.0 14.9 30 30
1/2" 10 3.05 Yes 39.0 17.6 30 30
5/8" 10 3.05 Yes 39.0 17.6 30 30
SFWB* 3/4" 10 3.05 Yes 42.0 19.0 30 30
7/8" 10 3.05 Yes 45.0 20.4 30 30
1" 10 3.05 Yes 48.0 21.7 30 30
1-1/4" 10 3.05 Yes 54.0 24.4 30 30
* Available in Zinc as a custom order.

195
Dietrich04_196&197 3/22/04 2:31 AM Page 196
Proven expansion/contraction control

for inside plaster corners.
■ Provides reliable stress relief at inside corners.
Corner Master™ #30 (CR30)
■ Offers exacting grounds.

■ Available in galvanized.
Corner Master™
Dietrich™ Corner Master™ #30 expansion/contraction

control joint is designed to provide stress relief at plaster
wall inside corner intersections. The double-V expansion
joint absorbs movement due to expansion and contraction
of plaster walls and controls cracking. Corner Master™ #30
joint has expanded flanges preformed at 90˚ for a flush fit
at inside corners. This expansion/control joint is offered in
ground heights of 1/2", 3/4" and 7/8", which aids plaster
keying and results in a clean, straight finish. Manufactured
from galvanized steel for corrosion protection.
Corner Master™ #30 (CR30)

lbs. (kg)
1/2 12.7 10 3.05 42.5 19.2 24 30
CR30 3/4 19.1 10 3.05 57.5 26.0 24 30
7/8 22.2 10 3.05 65.0 29.4 24 30
Dietrich04_196&197 3/22/04 2:33 AM Page 197
Effectively accommodates movement at code

prescribed limits, reduces labor time and
provides a neat, finished appearance.
Zinc Control Joints 38 (ZCJ3), 50 (ZCJ5), 75 (ZCJ7), 100 (ZCJ1)

■ Maximum corrosion protection.
■ Provides effective plaster bond.
Zinc Control Joint
Zinc Control Joints 38, 50, 75 and 100 are roll-formed

from zinc to resist corrosion in both interior and exterior
applications with gypsum or Portland cement plaster. An
open slot, 1/4" wide and 1/2" deep, is protected with plastic
tape that is removed after plaster and finish is completed.
Perforated short flanges aid keying and wire attachment
to metal lath or stapling to gypsum lath. Effective plaster
bonding is accomplished with the key-lock grounds. Ground
heights come in 3/8" (38), 1/2" (50), 3/4" (75) and 1" (100).
NOTE: Should not be used with magnesium oxy-chloride
cement stuccos or stuccos containing calcium chloride
additives. Construction paper or felt strips should be used
as flashing behind all expansion joints.
Zinc Control Joints 38(ZCJ3), 50 (ZCJ5), 75 (ZCJ7), 100 (ZCJ1)

lbs. (kg)
ZCJ3 3/8 9.5 10 3.05 50.0 22.6 24 30
ZCJ5 1/2 12.7 10 3.05 50.0 22.6 24 30
ZCJ7 3/4 19.1 10 3.05 50.0 22.6 24 30
ZCJ1 1 25.4 10 3.05 53.0 24.0 24 30

197
Dietrich04_198&199 3/22/04 2:35 AM Page 198
Controls and reduces cracks that result

from expansion and contraction
in stucco applications.
Double-V Expansion Control Joint—Galvanized (VVCJ), Zinc (VVZJ)

■ Controls and minimizes cracking.
■ Complies to ASTM C-1063.
Double-V
Control Joint
Double-V Expansion Control Joints relieve the stresses of basic expansion and
contraction associated with inherent shrinkage during stucco curing and general
thermal changes. Expanded flanges allow for proper keying and easy installation.
Corrosion protection maintained and ensured with galvanized steel and roll-
formed zinc. Zinc is recommended for exterior applications. Ground heights
include 3/8" for thin coat plaster and 1/2", 3/4" and 7/8" for conventional plaster.
Double-V Expansion Control Joint—Galvanized (VVCJ), Zinc (VVZJ)

lbs. (kg)
3/8 9.5 10 3.05 48 21.7 24 36
1/2 12.7 10 3.05 67.0 30.3 24 36
VVCJ
3/4 19.1 10 3.05 74.0 33.5 24 30
7/8 22.2 10 3.05 67.0 30.3 24 30
1/2 12.7 10 3.05 59.6 27.0 24 36
VVZJ* 3/4 19.1 10 3.05 65.8 29.8 24 30
7/8 22.2 10 3.05 59.6 27.0 24 30
*Zinc.
Dietrich04_198&199 3/22/04 2:36 AM Page 199
Rolled outer edges provide

strong bond to stucco to prevent
separation cracks.
Double-J Expansion Control Joint—Galvanized (XJ15), Zinc (ZJ15)

■ Exceptional expansion and contraction control.
■ Reduces stucco separation at joint edges.
Double-J
Control Joint
A general-purpose control joint offering exceptional expansion control for plastered

walls and ceilings, the Double-J Expansion Joint has a 5/16" reveal and rolled outer
edges that allow effective plaster bonding. This helps prevent visible separation
cracks. To ensure the desired finish, plaster must be embedded under rolled edges
and across the 1-1/4" expanded flanges. Plastic tape keeps the reveal clean and is
removed easily after finish application. Ground heights are 1/2", 3/4" and 7/8".
Available in galvanized steel or zinc.
Double-J Expansion Control Joint—Galvanized (XJ15), Zinc (ZJ15)

lbs. (kg)
1/2 12.7 10 3.05 38.4 17.4 24 40
XJ15 3/4 19.1 10 3.05 43.0 19.5 24 40
7/8 22.2 10 3.05 45.6 20.6 24 40
1/2 12.7 10 3.05 34.1 15.4 24 40
ZJ15* 3/4 19.1 10 3.05 38.2 17.3 24 40
7/8 22.2 10 3.05 40.5 18.3 24 40
*Zinc.

199
Dietrich04_200&201 3/22/04 2:38 AM Page 200
Surface-mounted E.I.F.S. control joint used to minimize

movement and reduce cracking.
Shallow V
Shallow-V E.I.F.S. Expansion Joint (KESV) & Deep-V E.I.F.S. Expansion Joint (KEDV)
■ Available with 1/4“ ground.

■ Expanded flanges for superior keying.
Shallow-V E.I.F.S.
Expansion Joints
provide a strong reveal
joint for thin-coat
plaster systems. Expanded flanges, narrow reveal and short grounds
combine to provide superior keying, a crisp clean finish and easy
installation. Galvanized steel and zinc provide corrosion resistance and are
not affected by UV rays, temperature inversions or petroleum derivatives
common with exterior finishing materials. Shallow-V is an aesthetic
companion to Deep-V where wall movement is minimal.
Shallow-V—E.I.F.S. Expansion Joint (KESV)

lbs. (kg)
KESV 1/4 6.4 10 3.05 53 23.9 24 42
Used when dissimilar surfaces meet

and when sheathing or lath do not join.
■ Available with 1/4“ and 3/8“ grounds.
■ Expanded flanges for superior keying. Deep-V
Deep-V E.I.F.S.
Expansion Joints
provide the same
features as their Shallow-V companions with the added benefit of a 3/4"
extension to the reveal depth. This addition enables stress relief in areas
where extreme wall expansion and contraction will occur and when the
sheathing and lath must be broken behind the joint area. A factory-applied
tape keeps seams unclogged and is easily removed for a clean finish after the
surface is completed. It’s commonly used in soffit areas.
Deep-V is superior to plastic or caulk joints because it will not fail due to
freeze/thaw changes or exposure to UV rays.
Deep-V E.I.F.S. Expansion Joint (KEDV)

lbs. (kg)
1/4 6 10 3.05 26 11.9 24 42
KEDV
3/8 10 10 3.05 48 21.7 24 42
Dietrich04_200&201 3/22/04 2:40 AM Page 201
Two-piece slip joint that accommodates

movement in two directions.
■ Allows for wall movement in multiple directions.
Expansion Joint #40—Galvanized (EJ40), Zinc (EZ40)

■ Adjusts from 1/4” to 5/8”.
Expansion Joint #40
■ Available with numerous modifications.
Caution: Additional weather shields should be installed behind the joint

to enhance the weather resistance of this system.
Dietrich™ expansion joint #40 is a two-piece, slip joint that #40 Expansion Joints should be used where excessive
finishes butt ends of adjacent panels in wide or tall walls horizontal and vertical movement may occur. They give
and ceilings to allow for multi-directional movement. Panels better results than J-Trim when used as a feature strip or as
are attached to parallel studs through the expansion joint a wall-to-ceiling joint. Atrium walls, wide wall areas and
flanges, enabling the finished surface to expand or contract structural column-through ceiling areas are some of
naturally without cracking. These are ideal for joining their special applications. These offer broad functional
dissimilar wall types such as wood framing to CMU and and aesthetic opportunities. Adjustable expansion opening
at construction joints. or reveal is 1/4" to 5/8". Ground heights are 1/2", 3/4" and 7/8".
Expansion Joint #40—Galvanized (EJ40), Zinc (EZ40)

lbs. (kg)
1/2 12.7 10 3.05 41 18.3 15 42
EJ40 3/4 19.1 10 3.05 44 19.7 15 42
7/8 22.2 10 3.05 45 20.4 15 42
1/2 12.7 10 3.05 50 22.4 15 42
EZ40* 3/4 19.1 10 3.05 53 23.8 15 42
7/8 22.2 10 3.05 56 25.1 15 42
*Zinc.

201
Dietrich04_202&203 3/22/04 2:43 AM Page 202
Provides a screed and stucco stop

at the sill plate line.
■ Provides straight-edge stops for applied plaster stucco and E.I.F.S.
F.H.A.7. Foundation Screed (FHA7) & 7/8" Sill Screed (SI36)
■ Offers exacting grounds and protective weeps.

■ Meets F.H.A. requirements.
■ Conforms to A.S.T.M. C1063. Foundation Weep Screed
Dietrich™ F.H.A.7. foundation weep screed protects the stop edges of stucco and exterior
insulated finish system materials at the sill plate. It’s commonly referred to as F.H.A. Screed
because it meets all pertinent F.H.A. requirements as part of a drainage system for exterior
stucco applications. The 3-1/2" nailing flange serves as a straight-edge stop at the sill plate line
and flashing when water-resistant paper or paper-backed lath is installed over the flange.
The bottom of the vertical nailing flange must terminate at or below the bottom of the sill
plate or the bottom of the shear panel. This will ensure a tight connection between the
bottom flange of the weep screed and the foundation. Bonding holes are punched in the 7/8"
or 1-3/8" V-grounds to enable keying. The weeping occurs along the surface of the angular
bead. Also available without bonding holes and in 28 gauge (FHAE) for non-code work.
The Uniform Building Code (UBC)* requires that all foundation screeds have a 3-1/2"
nailing flange, weep holes and a minimum thickness of 26-gauge steel.
F.H.A.7 Foundation Weep Screed (FHA7)

Product Grounds Depth Length Pcs./ Pcs./
lbs. (kg)
Code Inches (mm) Inches (mm) ft. (m) Carton Skid
7/8 22.2 3-1/2 88.9 10 3.05 16.8 7.6 10 500
FHA7
1-3/8 34.9 3-1/2 88.9 10 3.05 19.5 8.8 10 500
Similar to the FHA7, but provides trowel access underneath

to clean excess material and trim vapor barrier.
■ Provides straight-edge stops for
applied plaster stucco and EIFS.
■ Offers exacting grounds.
■ Impact and splash protection
at bottom edge.
The SI36 is a similar profile to the FHA7 Sill Screed
Foundation Screed except the bottom flange has
been cut back to allow trowel access for cleaning excess material and trimming of the
vapor barrier. The SI36 meets all other applicable codes with respect to 3-1/2" nailing
flange, 26-gauge galvanized steel and 7/8" ground.
7/8" Sill Screed (SI36)

lbs. (kg)
SI36 7/8 22.2 5-1/2 139.7 10 3.05 3.3 1.5 10 500
*The Uniform Building Code is published by the International Conference of Building Officials.
Dietrich04_202&203 3/22/04 2:45 AM Page 203
Stucco, Screeds and Exterior Finishing Products
Used as a plaster or casing stop bead

with stucco and EIFS Systems.
■ Provides straight-edge stops for applied plaster stucco and EIFS.
1-3/8" J-Weep with 2" Nailing Flange (JCLB), with Weep Holes (JWLB)
■ Used in conjunction with polystyrene or foam insulation board.
J Weep
Dietrich™ 1-3/8" J-weep low-back is commonly used as a stop around door and window openings or in areas where stucco or EIFS
terminations abut dissimilar wall types. Dietrich™ 1-3/8" J-weep low-back is nail, screw or staple-attached to the frame or sheathing,
then foam insulation, cement board or metal lath can be installed over it. In any case, the protruding ridge of the metal must extend
beyond the plane of overlaid materials to serve as a ground for the stucco or EIFS application. Installed in conjunction with 1" rigid
insulation associated with one-coat plaster stucco systems, the 1-3/8" ground provides proper depth for plaster keying. Galvanized
for corrosion protection, it also is available with weep holes ( JWLB).
1-3/8" J-Weep with a 2" nailing flange should not be used as a foundation weep screed for three-coat stucco applications.
This casing or plaster stop bead should only be used on approved one-coat systems.
The Uniform Building Code (UBC)* requires that all weep screeds have a 3-1/2" nailing flange, weep holes and a minimum
thickness of 26-gauge steel. This product does not conform to code-required work if used as a foundation weep.
1-3/8" J-Weep with 2" Nailing Flange (JCLB), with Weep Holes (JWLB)
DMF Size Weight/Ft. Packaging
lbs. (kg)
JCLB 1-3/8 34.9 2 50.8 10 3.05 0.220 0.100 NA 500
JWLB** 1-3/8 34.9 2 50.8 10 3.05 0.220 0.100 NA 500
**The JWLB product has weep holes.

203
Dietrich04_204 3/22/04 2:47 AM Page 204
3 1/2" High-Back J-Weep

used as sill weep screed
or at door and window
opening
J-Weep High-Back Plaster Stop (JWP)
■ Provides straight-edge stops for applied

plaster stucco and EIFS.
J Weep High-Back
Dietrich™ J-weep high-back plaster stop is a J-shaped square-

nosed trim manufactured from 26-gauge galvanized steel
with 7/8" or 1-3/8" grounds and 3-1/2" nailing flange.
Punched weep holes allow for use as a sill weep screed or
screed and trim around wall openings. Squared bends
accommodate 1" rigid insulation and 3/8" one-coat stucco
applications.
Dietrich™ J-weep high-back ( JWP) meets the Uniform
Building Code (UBC)* requirements that all foundation
weep screeds have a 3-1/2" minimum nailing flange, weep
holes and a minimum thickness of 26-gauge steel.
J-Weep High-Back Plaster Stop (JWP)

lbs. (kg)
7/8 22.2 3-1/2 88.9 10 3.05 26.0 11.8 10 500
JWP
1-3/8 34.9 3-1/2 88.9 10 3.05 29.0 13.2 10 500
Metal Lath
Galvanized Junior™ Mesh
(LAM) (P)* (O)* (S)* ......................208
Self-Furring Dimpled
(LAD) (P)* (O)* (S)*........................209
Self-Furring V-Groove Mesh Lath
(LAV) (P*), (O*), (S*) ......................210
4-Mesh 1/8" Z-Riblath
(LAZ), (P)* ............................................211
3/8" High Rib Lath
(LAR) (K)* ............................................212
Strip Lath (LAST) ................................213
Cornerite™ (XRIT) ................................214
Hanger Wire
(HWB8, HWB9, HW12)....................215
Tie Wire (TW18)..................................215
Barrier Mesh BM50, BM75,
BM10, BM15 ........................................216
205
Advantages
METAL Strength—Metal lath embedded with the plaster provides superior strength and
LATH reinforcement.
OVERVIEW Flexibility—Readily shaped to ornamental contours to a degree not possible with

other plaster bases.
Metal Lath Overview
Metal lath and plaster systems have Fire Resistance—When used with gypsum plaster, metal lath provides excellent fire-
been used for many years in both resistant construction: up to two hours for partitions and four hours for ceilings and
residential and commercial appli- column fireproofing.
cations. Plaster finishes provide a
smooth, high-quality wall surface, Security—Metal lath and plaster surfaces are extremely difficult to penetrate. They
resistant to high impact and abra- provide excellent protection against break-through.
sion. Metal lath is used as a substrate
to create a strong mechanical bond Weight per Square Yard
with plaster and stucco, and is used Metal lath is commonly referred to in weight per
on interior and exterior walls, ceil- square yard. Each nominally sized 27" x 96" sheet
ings, soffits, fascia and ceramic tile equates to 2 square yards or 18 square feet per
underlayment. sheet. Lath is available in three different weights:
1.75 lbs./sq. yd.—commonly used as an underlay-
ment in interior ceramic tile applications and also
with selected proprietary one-coat stucco systems.
2.5 lbs./sq. yd.—commonly used as a substrate
for ornamental and contour gypsum plaster or
portland cement stucco.
3.4 lbs./sq. yd.—commonly used for two- and
three-coat exterior stucco applications.
NOTE: Not all weights are recommended for all
applications. Contact your Dietrich Customer
Care Representative for assistance.
Styles
Metal lath is available in a variety of different
styles for various applications. Dietrich uses a
lettering system incorporated into the product
code to indicate available styles.
M—Flat Diamond Mesh
D—Dimpled Self Furring
V—V-Groove Self Furring
Z—1/8" Ribs for Rigidity
R—3/8" High Rib for Maximum Rigidity
Overview
Paper-Backed 4-Mesh Z-Riblath is used wherever sound, flat surfaces are

required. Nail, staple or screw-attach lath to framing with
Offset Options ribs perpendicular to wall studs. Z-Riblath is tied to sus-
Metal lath is available pended ceilings but can be nailed, stapled or screwed to the
backed with asphalt sat- ceiling joists for direct applications. Flat rib lath should
urated paper for appli- never be used over solid surfaces.
Metal Lath Overview

cations requiring a 3/8" Riblath is the most rigid of all and provides the added
moisture barrier. Paper support required when framing is more than 16" O.C. but
conforms to Federal less than or equal to 24" O.C. In wall and ceiling applications,
Specification UU-B- it must be attached in the same manner as 4-Mesh Riblath.
790a, type 1, grade D, Due to 3/8" rib, minimum ground thickness must be 1".
style 2. Dietrich uses a lettering system incorporated into
the product code to indicate available offsets. Barrier Mesh is a tough, rigid heavy-gauge expanded mesh
used behind common wall substrates to protect against break-
P—Paper is offset by 1" on one side ins and break-outs. This high-strength security mesh is tough to
and one end.*
smash or cut and safeguards walls and ceilings in homes, apart-
ments, offices, stores, storage areas and correctional facilities.
O—Paper is offset by 2" on one side Installation

and one end.
Lath should be applied with the long
dimension across supports and with end
S—Paper is offset by 1" on one end. joints staggered between courses. The
Sides are not offset.* ends of the mesh lath should be lapped 1",
and the sides should be lapped at least
1/2". Check lap minimums required by
K—Specially applied Kraft paper for local code. Nail, screw or staple-attach
use with machine-applied stucco
to minimize plaster waste.
mesh lath on walls, so that the lower sheets
overlap the upper sheets. Lath also may be
*Available for non-code work. The Uniform Building Code
(UBC) requires a 2" paper lap per ASTM C 1063-99. wire tied to the furring channel for ceiling applications. If an
end lap should occur between supports, the two sheets
Types should be laced or tied using 18-gauge tie wire. Secure lath to
Junior Diamond Mesh Lath is used as a substrate for gyp- all supports at intervals not exceeding 6". Mesh lath should be
sum plaster or for Portland cement plaster stucco on either formed into corners and carried out onto an abutting surface.
interior or exterior wall, ceiling, soffit and fascia surfaces, and Where this is not possible, Cornerite, an internal plaster angle
can be used under ceramic tile in wall ceiling and floor applica- reinforcement should be used.
tions. It’s useful in all general-purpose applications, and is the
best lath available for ornamental work and contoured surfaces. Paper-Back Installation
Junior Diamond Mesh Lath—Asphalt Paper Backed is Installation of paper-backed lath is best accomplished when
used in applications where a moisture barrier is required. metal-to-metal and paper-to-paper contact is maintained.
Care should be taken to make sure paper overlaps paper and Dietrich Metal Framing uses asphalt-saturated paper meet-
metal overlaps metal in a shingle-like manner during appli- ing Federal Spec. UU-B-790a as backing on metal lath prod-
cation. Dietrich’s paper backing extends beyond the mesh ucts. This paper provides a water- resistant barrier that is a
to accommodate shingling application. For external applica- vapor-permeable backing consistent with grade D, style 2
tion, 3.4 lb./sq. yd. lath is recommended. paper (other grades and styles are available upon request).
Minimum lap requirement for Jr. Diamond Mesh, Self-
Self-Furring Junior Diamond Mesh Lath is attached to Furring and 1/8" Flat Rib Laths is 1/2" at the sides and 1" on
substrate through the dimple that furs the lath surface away the ends which can be easily attained with either “P” (paper
from a solid substrate. This lath is especially useful as a stuc- offset 1" on one side and one end) or “S” (paper flush on
co base or for column fireproofing or replastering over old sides and offset 1" on ends) applications. ASTM C-1063,
surfaces. Self-furred lath is required over all solid surfaces. requires a 2" minimum paper lap on all sides. Dietrich’s
Self-Furring Junior Diamond Mesh Lath-Asphalt paper offset option “O” conforms to
Paper Backed is used where a moisture barrier is required. this specification. Make sure to con-
It’s attached in the same manner, but care should be taken sult your local building code to
to make sure paper overlaps paper during application. ensure proper compliance.

207
Dietrich04_208&209 3/22/04 2:49 AM Page 208
General-purpose lath
provides an exceptionally
strong substrate for
gypsum plaster and
Galvanized Junior™ Mesh (LAM) (P)* (O)* (S)*
Portland cement
plaster stucco.
■ Excellent for ornamental and contour
plastering.
■ Small mesh openings conserve plaster
and reduce droppings.
■ Minimizes stress cracks by maintaining
consistent plaster depths. Junior™ Mesh
■ Available in 1.75, 2.5 and 3.4 pounds per
square yard.
bonding. Diamond mesh lath is easily cut and can be

formed to accommodate curved surfaces including
ornamental, contour plastering. All sheets are flat 27" x 96"
(nominal) rectangles with squared ends and smooth edges
that allow for efficient installation and consistent lapping.
*Asphalt paper-backed lath is available in a variety of offsets
for various applications requiring a moisture barrier. Paper
conforms to Federal Specification UU-B-790A; type 1, grade
D, style 2 and type 1, grade B, style 1a.
Paper-Backed Offset Options
P — Paper is offset by 1" on one side and one end.* +
O — Paper is offset by 2" on one side and one end.*
S — Paper is offset by 1" on one end. Sides are not offset.* +
Dietrich™ Junior™ diamond mesh lath is used as a substrate
for gypsum plaster or for Portland cement plaster stucco on +Available for non-code work. The Uniform Building Code
either interior or exterior walls, ceilings, soffit and fascia (UBC) requires a 2" paper lap per ASTM C 1063-99.
surfaces, and can be used under ceramic tile in wall, ceiling
Limitations: Metal lath products should not be used
and floor applications. It’s useful in all general-purpose
with magnesium oxychloride cement stuccos or stuccos
applications and is the best lath available for ornamental
containing calcium chloride additives. In ceiling
work and contoured surfaces.
assemblies, certain precautions concerning
Galvanized steel sheets are slit and expanded to form small construction, insulation and ventilation are necessary
diamond mesh openings (over 11,000 per square yard). for good performance.
This large number of openings provides superior stucco
Galvanized Junior™ Mesh (LAM), (P), (O), (S)

DMF Weight Size Packaging
Product Width Length Pcs./ Bundles/ Yds2/ M2/
lbs./yard2
kg/yard 2
Code Inches (mm) Inches (mm) Bundle Skid Skid Skid

1.75 0.79 27 686 96 2438 10 50 1000 836
LAM
2.5 1.13 27 686 96 2438 10 50 1000 836
(P, O, S)
3.4 1.54 27 686 96 2438 10 50 1000 836
Dietrich04_208&209 3/22/04 2:51 AM Page 209
Metal Lath
Dimpled raised lath substrate for superior mechanical

bond over solid surfaces.
■ Dimples ensure thorough plaster penetration
Self-Furring Dimpled (LAD) (P)* (O)* (S)*

and strong mechanical bond.
■ Easily shaped for curved or contoured surfaces.
■ Maintains consistent plaster depths.
Self-Furring Dimpled
shingle-like manner during application.

P — Paper is offset by 1" on one side and one end.* +
O — Paper is offset by 2" on one side and one end.*
S — Paper is offset by 1" on one end. Sides are not offset.* +
+Available for non-code work. The Uniform Building Code
Dietrich™ self-furring dimpled lath is manufactured with (UBC) requires a 2" paper lap per ASTM C 1063-99.
approximately 1/4" dimples that raises diamond mesh away
from solid surfaces to enable thorough plaster or stucco
penetration into and behind the lath for superior mechanical
bonding. The approximately 1/4" dimples are spaced every
1-1/2" O.C. over the entire 27" x 96" rectangular sheet. This
pattern, with approximately 11,000 keys per square yard,
serves to hold lath approximately 1/4" away from the surface,
enabling the plaster to penetrate fully and bond over solid
surfaces like concrete, cement board, column fireproofing,
masonry and replastering over old surfaces. To maintain the
designed furring characteristics, fasteners must be applied
within the dimple cavity.
*Dimpled Lath is also available with an asphalt paper-backing
for applications that require a moisture barrier. The glue-
attached asphalt-saturated building paper also ensures a
consistent plaster or stucco depth as the paper prevents
excessive plaster waste and stucco thickness variation. Care
should be taken to make sure paper overlaps paper in a
Self-Furring Dimpled (LAD), (P), (O), (S)

Product Width Length Pcs./ Bundles/ Yds2/ M2/
lbs./yard2
kg/yard 2

1.75 0.79 27 686 96 2438 10 25 500 418
LAD
2.5 1.13 27 686 96 2438 10 25 500 418
(P, O, S)
3.4 1.54 27 686 96 2438 10 25 500 418

209
Dietrich04_210&211 3/22/04 2:54 AM Page 210
V-Groove raises lath substrate

for strong mechanical bond
over solid surfaces.
Self-Furring V-Groove Mesh Lath (LAV) (P*), (O*), (S*)
■ V-Grooves provide space for full plaster key

into mesh.
■ Maintains consistent plaster depths.
■ Eliminates need for added furring strips.
■ Available in 2.5 and 3.4 lbs. per square yard.
Self-Furring, V-Groove
Dietrich™ self-furring v-groove mesh lath is manufactured

with five approximately 1/4" deep "V" ribs along the length
of the sheet. These Vs raise the diamond mesh from solid
surfaces to allow thorough plaster or stucco penetration
into and behind the lath for superior mechanical bonding.
V-Groove is used over solid surfaces like concrete, cement
board, column fireproofing, masonry, sheathing and
replastering over old surfaces. To maintain the designed
V-groove furring characteristics, fasteners must be applied
within the V-cavity.
*V-Groove is also available
with asphalt paper-backed for
applications that require a
moisture barrier. The glue-
attached asphalt-saturated paper
also ensures a consistent plaster
or stucco depth as the paper
prevents excessive plaster waste.
Care should be taken to make
sure paper overlaps paper in a
shingle-like manner during
application.
P — Paper is offset by 1" on
one side and one end.* +
O — Paper is offset by 2" on
one side and one end.*
S — Paper is offset by 1" on one
end. Sides are not offset.* +
+Available for non-code work. The Uniform Building Code
(UBC) requires a 2" paper lap per ASTM C 1063-99.
Self-Furring V-Groove Mesh Lath (LAV), (P), (O), (S)
Product Width Length Pcs./ Bundles/ Yards2/ M2/
lbs./yard2
kg/yard 2

1.75 0.79 27 686 96 2438 10 25 500 418
LAV
2.5 1.13 27 686 96 2438 10 25 500 418
(P, O, S)
3.4 1.54 27 686 96 2438 10 25 500 418
Dietrich04_210&211 3/22/04 2:56 AM Page 211
Metal Lath
1/8" ribs provide additional

rigidity for wider on-center
spacing.
4-Mesh 1/8" Z-Riblath (LAZ), (P)*

■ Enables double-up plastering to shorten
application time.
■ Smaller mesh openings aid keying and reduce
plaster usage.
■ 1/8“ ribs add rigidity. 4-Mesh
■ Available in 2.75 and 3.4 lbs. per square yard.

■ Not suitable for contour plastering or use over
solid surfaces requiring 1/4” furring.
is applied. The additional rigidity of the lath can be used

with wall framing members up to 24" O.C.
Attachment to the framing can be made by nailing, screwing
or stapling lath to framing with ribs across studs. Lath must
be wire-tied to framing or channel for ceiling applications.
Sheets are 27" by 96" and reversible for faster and easier
installation. Flat rib can be nailed to joists for direct
application to framing; however, wire tying is recommended
for all suspended ceiling applications over channel.
*4-Mesh 1/8" Z-Riblath is also available
with asphalt paper-backed for
applications that require a moisture
barrier. The glue-attached asphalt
paper also ensures a consistent plaster
Dietrich™ 4-mesh z-riblath is a galvanized flat rib-type lath with or stucco depth and prevents excessive
18 1/8" high ribs designed to provide additional rigidity for plaster waste. Care should be taken to
wider spacing (16" O.C. and 19.2" O.C.) on flat plaster ceiling make sure paper overlaps paper in a
applications and open frame studding without sheathing. shingle-like manner during application.
Smaller mesh openings and rigidity of ribs aid in keying and
enables double-up plastering, saving plastering time. Paper-Backed Offset Options
Double-up plastering is the process of applying the brown P — Paper is offset by 1" on one side
coat before the scratch coat has fully hardened. Care must and one end.* +
be taken to ensure that the scratch coat is properly set.
+Available for non-code work. The
Dietrich™ 4-mesh z-riblath is also used as a ceramic tile Uniform Building Code (UBC) requires
backer over wood or steel stud framing when no sheathing a 2" paper lap per ASTM C 1063-99.
4-Mesh 1/8" Z-Riblath (LAZ), (P)

lbs./yard 2
kg/yard 2

2.75 1.24 27 686 96 2438 10 50 1000 836
LAZ (P)
3.4 1.54 27 686 96 2438 10 50 1000 836

211
Dietrich04_212&213 3/22/04 2:57 AM Page 212
Designed to provide
exceptional rigidity
in ceiling and soffit
applications.
3/8" High Rib Lath (LAR) (K)*
■ Herringbone mesh pattern allows

for excellent keying.
■ Commonly used for plaster ceilings
under steel joists, concrete floors
and over soffits.
■ Easily lapped at outer edges 3/8" Rib Lath
reducing plaster cracks.
■ Available in 3.4 lbs. per square
yard only.
■ Not suitable for contour plastering.
Dietrich™ 3/8" high rib lath is the most rigid of all laths and by wire tying lath back to back with ribs running
provides the added support required when framing is more perpendicular to each other. Plaster can then be applied
than 16" O.C. but does not exceed 24" O.C. It is commonly to form a wall 2" thick.
used for soffits and ceilings under steel or wood joist
construction and metal-reinforced concrete floors. *3/8" High Rib Lath is also available with a kraft paper
backing between the ribs to prevent excessive plaster
Dietrich™ 3/8" high rib lath has a herringbone mesh waste.
pattern with 3/8" V-shaped ribs running the length of the
sheet at 4-1/2" intervals and inverted 3/16" intermediate Paper-Backed Offset Options
ribs. The rib is placed against the framing member and K — Specially applied kraft paper used when machine-
does not require a minimum 1" three-coat system. Because applied stucco is used to minimize plaster waste.*
of the Dietrich™ 3/8" riblath’s extraordinary strength, this
lath can be used for studless nonload-bearing partitions
3/8" High Rib Lath (LAR) (K)

lbs./yard2
kg/yard 2

LAR 3.4 1.54 27 686 96 2438 10 50 1000 836
Dietrich04_212&213 3/22/04 2:59 AM Page 213
Metal Lath
Expanded metal strip

for general plaster
reinforcement.
Strip Lath (LAST)

Strip Lath
Dietrich™ strip lath is a flat expanded metal strip used as plaster

reinforcement over joints of non-metallic lathing bases and where
dissimilar bases join. It’s commonly attached diagonally at the corners of
doors, windows or areas prone to cracks. It may also be used to span pipe
chases or reinforce other stress points such as the corners of openings in
the stucco membrane within the lath system. Available in 4" and 6" widths
and 8' lengths.
Strip Lath (LAST)

Product Width Length Pcs./ Pcs./
lbs. (kg)
Code Inches (mm) ft. (m) Bundle Skid
4 102 8 2.44 24.5 11.1 75 1350
LAST
6 152 8 2.44 35.8 16.2 75 1350

213
Dietrich04_214&215 3/22/04 3:01 AM Page 214
Expanded metal lath angle for inside or inner plaster

corners used to reduce corner cracks.
Cornerite™ (XRIT)

Cornerite™
Dietrich™ Cornerite™ metal lath angle is used to reinforce

all inside or inner plaster corners to reduce corner
cracking. Cornerite™ metal lath angle is formed from
finished edge strip lath and bent lengthwise to a 100° angle
to ensure a snug fit into 90° corners. It's commonly used
when walls meet walls or ceilings, over inner angles of
masonry construction and in the floating-angle method of
applying gypsum lath to wood framing in order to reduce
plaster cracking.
Dietrich™ Cornerite™ metal lath angle should be tied to the
base lath using 18-gauge tie wire. Cornerite™ metal lath
angle should not be attached directly to support framing
but allowed to float in the corner. Available in 2" x 2" in 4 '
and 8' lengths, and 3" x 3" in 8' lengths only.
Cornerite™ (XRIT)
Product Width Length Pcs./ Pcs./
lbs. (kg)
Code Inches (mm) ft. (m) Bundle Skid
2x2 50.8 x 50.8 4 1.22 30 13.6 125 1350
XRIT 2x2 50.8 x 50.8 8 2.44 60 27.2 75 1350
3x3 50.8 x 50.8 8 2.44 78 35.4 75 1350
Dietrich04_214&215 3/22/04 3:03 AM Page 215
Metal Lath
Suspends and connects U-channel

and furring channel gridwork for
drywall, plaster and veneer ceilings.
Hanger Wire (HWB8, HWB9, HW12) & Tie Wire (TW18)

Hanger Wire
■ Tie wire is available in 18 gauge and in lengths of 24”, 28” and 48”.
■ Hanger wire is available in 8, 9 and 12 gauge and lengths of 12’.
■ Wire products conform to ASTM C1063 and A641.
■ Available by the hank (bundle).
Tie Wire

Dietrich hanger wire is available in 8, 9 and 12 gauge and is
™
galvanized for corrosion resistance. Hanger wire is Product Gauge Bundles/
ft. (m) lbs. (kg)
suspended from the underside of the floor structure to Code Skid
provide a structural support for drop, gypsum wallboard or HWB8 8 12 3.66 50 22.62 20
plaster suspended ceilings. HWB9 9 12 3.66 50 22.62 20
HW12 12 12 3.66 50 22.62 20
Dietrich™ tie wire is 18-gauge galvanized soft annealed wire
used in drywall and plaster construction to tie furring Tie Wire (TW18)
channels to main runner U-channels. It’s also used to tie DMF Length Weight/Box
Product Gauge
metal lath to channels in plaster construction, attach Inches (mm) lbs. (kg)
Code
expansion/control joints to lath and tie the lath overlap
24 610 25 11.31
between rows of fasteners.
TW18 18 28 711 25 11.31
48 1219 50 22.62

215
Dietrich04_216 3/22/04 3:04 AM Page 216
High-strength security backing

for walls and ceilings in all
types of construction.
Barrier Mesh BM50, BM75, BM10, BM15
■ Protects against break-ins and break-outs.

■ Ideal for use in lieu of reinforced concrete or
concrete block.
■ High-strength and fire-resistant.
■ Made from carbon steel.
Barrier Mesh is a tough, rigid heavy-gauge security mesh used Flat

behind common-wall substrates to protect against break-ins and
break-outs. Sheets are 48" x 96" expanded steel used to provide
continuous reinforcement where security is the objective. This
high-strength security mesh is tough to smash or cut and
safeguards walls and ceilings in homes, apartments, offices,
stores, vaults, storage areas and correctional facilities.
In addition to providing a high-strength and fire-resistant plaster
finish, Barrier Mesh also offers a cost-effective and time-saving
alternative to reinforced concrete or concrete block. Available
opening widths include: 1/2" (BM50), 3/4" (BM75), 1" (BM10)
and 1-1/2" (BM15). Available gauges include: 18 gauge (BM50);
16 gauge (BM50), (BM10), (BM15); 13 gauge (BM50), (BM75),
(BM15) and 10 gauge (BM75), (BM15). Product can be produced
to Military Spec. MIL-M-17194 Type II, Class 1; ASTM 1267.
Special order gauge and length combinations can be provided
upon request. Inquire with your Dietrich Metal Framing
Customer Care Representative.
BM50 BM15
Barrier Mesh (BM50), (BM75), (BM10), (BM15)

DMF Thickness Size Weight/100 ft.2
SWD LWD C-C of Bond Percent of Overall
Product Gauge Inches (mm) lbs. (kg) Width Length (SWD x LWD) Open Area Thickness
Code
18 1/2 12.7 66 29.9 96" 48" .500" x 1.20" 60 .039"
BM50 16 1/2 12.7 82 37.2 96" 48" .500" x 1.20" 63 .050"
13 1/2 12.7 140 63.5 96" 48" .500" x 1.20" 52 .070"
13 3/4 19.1 75 34.0 96" 48" .923" x 2.00" 74 .070"
BM75
10 3/4 19.1 171 77.6 96" 48" .923" x 2.00" 63 .120"
BM10 16 1 25.4 41 18.6 96" 48" 1.090" x 2.00" 78 .050"
16 1-1/2 38.1 38 17.2 96" 48" 1.33" x 3.00" 83 .048"
BM15 13 1-1/2 38.1 57 25.9 96" 48" 1.33" x 3.00" 80 .070"
10 1-1/2 38.1 114 51.7 96" 48" 1.33" x 3.00" 75 .110"
*Available in standard or flat.
Dietrich04_Index new 3/23/04 4:26 PM Page 217
Index
#30 Corner Master™ ....................................................196 Block & Strap ................................................................38

#40 Expansion Joint ....................................................201 BOCA ........................................................................126
#66 Expanded Flange Casing Bead ....................192–193 Boxed Headers ............................................................71
#66 N Short Flange Casing Bead ......................194–195 Breakaway Clips ........................................................127
#7 Foundation Weep Screed ......................................202 Break Press..............................................................53, 94
#701A Metal J with 3/32 Grounds ..............................186 Bridging Bar ..................................................................36
#701B Metal L with 3/32 Grounds ..............................187 Bridging/Bracing-Drywall..........................................36-38
#801A Metal J with 1/16 Grounds ..............................186 Bridging/Bracing-Structural......................................86-91
#801B Metal L with 1/16 Grounds ..............................187 Bridle Hanger ..............................................................109
093 Control Joint ........................................................151 Bullnose Cornerbead
1/8 Flat Rib Lath ........................................................211 Bullnose “J” Round — Metal ..............................137
103 Deluxe® ....................................................................12 Bullnose 135 Degree — Metal ............................135
103 Deluxe® Corner Bead ............................................132 Bullnose 90 Degree — Metal ..............................134
135 Corner Angle ..........................................................42 Bullnose Corner Bead — Metal ..........................134
1-3/8 J-Weep ..............................................................203 Bullnose Corner Bead — Paper-Faced ..............174
1-A Expanded Flange Corner Bead ............................188 Bullnose Corner Bead — Vinyl ....................158–159
2-Piece Expansion Joint #40 ......................................201 Bullnose Half Round — Metal ............................137
2-Way Corner Cap — 3/4 Bullnose ............................160 Bullnose Kerf Bead — Metal ..............................136
2-Way Corner Cap — Metal ......................................138 Bullnose Splay — Metal ......................................135
3-Way Corner Cap — 3/4 Bullnose ............................160 Bullnose Corner & Transition Caps
3-Way Corner Cap — Metal ........................................138 2-Way Metal Corner Cap ....................................138
3-Way Off-Angle Overlap Corner Cap — 3-Way Metal Corner Cap ....................................138
1-1/2 Bullnose ....................................................162 2-Way 90˚ Inside Corner Cap
3-Way Off-Angle Overlap Corner Cap — (3/4 Bullnose) ................................................160
3/4 Bullnose ........................................................162 3-Way 90˚ Overlap Corner Cap
3-Way Overlap Corner Cap — 1-1/2 Bullnose ..........161 (3/4 Bullnose) ................................................160
3-Way Overlap Corner Cap — 3/4 Bullnose ..............161 3-Way 90˚ Corner Cap (3/4 Bullnose) ..................161
3/8 High Rib Lath ........................................................212 3-Way 90˚ Overlap Corner Cap
4-Mesh 1/8 Z-Riblath ..................................................211 (1-1/2 Bullnose) ............................................161
5-1/2 Sill Screed ........................................................202 3-Way Off-Angle Overlap Corner Cap
5400 Spazzer™ ..............................................................12 (3/4 Bullnose) ................................................162
5400 Spazzer® Bar ........................................................86 3-Way Off-Angle Overlap Corner Cap
800 Mini-Bead™ ..........................................................152 (1-1/2 Bullnose) ............................................162
9200 Spazzer™ ..............................................................12 Transition Cap (Bullnose to 90˚) ..........................139
9200 Spazzer® Bar ........................................................36
■■■■■ C ■■■■■
■■■■■ A ■■■■■ C-Joist ................................................................98–101
A-Series™ Support Clip ..................................................84 C-Runner — Area Separation System ........................126
Adjustable Expansion Joint #40 ................................201 C-Stud Headers ......................................................70–71
Adjustable Wall-Furring Bracket ....................................45 C-Studs ..................................................................58–60
AEC Support ..................................................................18 C-Stud Trusses ..........................................................120
Aegis Metal Framing ......................................................13 CAD Details ..........................................Inside Back Cover
Aegis™ Trusses ....................................................118–119 Capped Headers ..........................................................71
Aluminum Burn Clips ..................................................127 Casing Bead ........................................................192–195
ArchWay Corner Bead ................................................157 Cavity Shaft Wall ..................................................124–125
Area-Separation Walls..........................................126–127 Ceilings — Furring & CRC Application ........................41
Asphalt-Backed Metal Lath ................................206–212 Centipede™ ....................................................................52
ASTM ..............................................................4, 222–223 Certification Letter................................................222–223
Clinch On Products, Inc ................................................12
■■■■■ ■■■■■ Clinch-On Products, Inc.’s Corner Beads
B Corner Bead/Electro ............................................140
B-Series Support Clip ..................................................82
™
Corner Bead/Hot-Dipped Galvanized ..................141
Back-to-Back Headers ................................................70 Corner Bead/Smooth ..........................................142
Backing Plate ................................................................49 Corner Splay — Hot-Dipped ..............................143
Bar Guard ......................................................................86 Corner Splay — Electro ......................................143
Barrier Mesh ..............................................................216 Electro Bullnose ..................................................144
Benefits ....................................................................8–11 Hot-Dipped Bullnose ..........................................144
Black Iron ................................................................37, 87 Electro Bullnose Splay ........................................146

217
Hot Dipped 3/4 Bullnose Splay ..........................146 Drywall Hemmed Track ................................................31
Painted 3/4 Bullnose ..........................................147 Drywall Knockouts ........................................................25
Painted 3/4 Bullnose Splay ................................145 Drywall Studs ..........................................................21, 24
Clinch Tool ..................................................................132 Drywall Track ..........................................................26-28
Index
Clip Angles ..............................................................80–84 Dull Corner Bead ........................................................132

Clip ExpressSM ..........................................................12, 18 DWC ..............................................................................43
Coatings ..........................................................................4
Cold-Rolled Channel ..............................................37, 87 ■■■■■ E ■■■■■
Composite Limiting Heights ..........................................30
Control Joints ..............................................151, 197–201 E-Business ....................................................................16
Corner Angle ..........................................................42, 92 E-Stud ..........................................................................125
Corner Beads EasyClip™ Support Clips ..........................................79–84
Corner Bead Electro ....................................132, 140 E-Series™ Support Clip ..........................................79, 104
Corner Beads — Metal ................132–137, 140–147 E.I.F.S. ........................................................................155
Corner Beads — Paper-Faced ....................170–178 End Clips (A-Series™) ....................................................84
Corner Beads — Vinyl ................................156–159 Environmental Benefits ..................................................11
Cornerbead Tool ..........................................................132 Expansion Joint #40 ..................................................201
Corner Master™ #30 ....................................................196 Exterior Light-Gauge Load-Bearing Headers ..........68–71
Cornerite™ ..................................................................191 Exterior Finish Systems Accessories
Cost ................................................................................9 Mini-Bead™ 800 & Mini-Bead™ 900 Zinc ..............184
CRC ........................................................................37, 87 Mini-Bead™ 701-A Zinc ........................................186
CSE™ ..................................................................58-59, 98 Mini-Bead™ 701-B Zinc ........................................187
CSJ™ ..................................................................58-59, 98 Zinc Control Joint 38, 50, 75 & 100 ....................197
CSS™ ..................................................................58-59, 98 Double-V Expansion Control Joint Zinc ..............198
CSW™ ................................................................58-59, 98 Double-J Expansion Joint Zinc ..........................199
C-Stud Trusses ..........................................................120 Expansion Joint #40 Zinc ....................................201
CT Studs ....................................................................124 1-A Expanded Flange Corner Bead Zinc ............188
Curtain-Wall Studs ..................................................58–59 Exterior Framing ......................................................58-94
Custom Brakes, Shapes & Miscellaneous Angles ..53, 94
Customer Care ..............................................................17 ■■■■■ F ■■■■■
Customer Service ..........................................................17
CWI™ ......................................................................58-59 F.H.A.7 Foundation Screed ........................................202
CWN™ ....................................................................58-59 Fast Clip™ ......................................................................72
Fast Strut™ ..............................................................12, 73
Fast Top™ Clip ........................................................12, 74
■■■■■ D ■■■■■ Fire-Rated Assemblies ........................................121–128
Danback ................................................................12, 50
™
Fire Resistance ................................................................9
DDG ........................................................................13, 23 Fire Wall ..............................................................124–127
Deep-V E.I.F.S. Expansion Joint ................................200 Flat Rib Lath ................................................................211
Deflection Connectors/Accessories ........................72–77 Flat Strap........................................................................49
Deflection Track Systems — Drywall ......................32–35 Floor Joist Framing Components ........................98–113
Deflection Track Systems — Structural ..................62–67 Floor Joist Hangers & Connectors ......................108–113
D.E.F.S. ......................................................................155 Foundation Clips ........................................................113
Deluxe Cornerbead ......................................................132 Foundation Screeds ............................................202–204
Diagonal Tension Strap ................................................89 Furring Channel — Heavy-Duty ....................................93
Diamond Mesh Lath ....................................................208 Furring Channel ............................................................43
Dietrich Building Systems..............................................13 Furring Channel Clips ..................................................44
Dietrich Clip ExpressSM ............................................12, 14
Dietrich Design Group....................................................13 ■■■■■ G ■■■■■
Dietrich Residential Steel Systems ................................13
Dimpled Self-Furring Lath ..........................................209 Gauges ............................................................................5
Double-J Expansion Joint — Galvanized ..................199 Galvanized Junior Mesh ............................................208
Double-Leg Resilient Channel ......................................46 General Notes ..................................................................5
Double Track™ — Drywall ..............................................35 Goldline® ........................................................................12
Double Track™ — Structural ..........................................66 Grabber® ........................................................................12
Double-V Expansion Control Joint ..............................198 Green Building ............................................................224
Double-X™ Corner Bead ..............................................189 Grommets/Insulators ....................................................52
Drywall Beads & Trims ........................................132–185 Grooved Self-Furring Mesh Lath ................................210
Drywall Furring Channel ................................................43 Gussett Plates ..............................................................91
Index
■■■■■ H ■■■■■ Lateral Tie Plate ..........................................................112

Ledger Connector System ..........................................110
Hanger Wire ..................................................................44 LEED® Credits ..............................................................224
Hat Channel ..................................................................43 Light-Gauge Structural Framing Systems ..............58–61
Head of Wall..........................................32-35, 62-67, 128 Light-Gauge Structural Track ........................................61
Heavy-Duty Furring Channel..........................................93 Lightning ........................................................................10
Headers ..................................................................68-71 Limiting Heights ............................................................30
Hemmed Corner Angle ................................................42 Limiting Heights — Drywall............................................30
Hemmed Track ..............................................................31 Locations ........................................................................3
High Hat Channel ..........................................................43 Long-Leg Track — Drywall ..........................................28
Horizontal Bracing ..................................................49, 50 Long-Leg Track — Structural ......................................61
Hot-Dipped Galvanized Corner Bead ................133, 141 Lox Drive® ......................................................................12
H-Stud ......................................................................127
H-Track ......................................................................126
■■■■■ M ■■■■■
Hurricane Ties ..............................................................120
Material Certification ............................................222-223
■■■■■ ■■■■■ Mesh Lath ....................................................................208
I Metal Angle Runner ................................................42, 92
I-Headers ......................................................................70 Metal Beads & Trims
ICBO ....................................................inside back cover 103 Deluxe® Corner Bead ....................................132
ICC ......................................................inside back cover Quicksilver™ Corner Bead ....................................133
ICF Hanger ..................................................................110 Clinch-On Products, Inc. Corner Beads ......140–147
Installation Assistance ..........................inside back cover 120/135˚ Corner Bead ........................................133
Interior Deflection Systems ......................................32-35 Bullnose “J” Round ............................................137
Interior Framing ........................................................21-53 90˚ Bullnose Corner Bead ..................................134
Interior Framing-Ceilings ..........................................40-41 135˚ Bullnose Corner Bead ................................135
International ..................................................................20 Bullnose Kerfed Corner Bead ..............................136
#200A U-Trim ......................................................149
■■■■■ J ■■■■■ #200B L-Trim ......................................................150
#400, #401 & #402 J-Trim ..................................148
“J” Round ..................................................................137 3/4 Bullnose 2-Way Corner Cap ........................138
J-Trim — Metal ..........................................................150 3/4 Bullnose 3-Way Corner Cap ........................138
J-Bead — Vinyl ..........................................................164 Metal Trims & Finishing Products
J-Weep Plaster Stop ..................................................204 Metal J-Trim ........................................................148
J-Metal ........................................................................148 Metal U-Trim/Spackle-J ......................................149
J-Runner ....................................................................125 Metal L-Trim ........................................................150
J-Track ........................................................................125 093 Drywall Control Joint ....................................151
Jamb Strut ..................................................................125 Mini-Bead™ 800 & 900 ........................................152
Joists, Steel............................................................98–103 Metal Corner Beads ............................................132, 133
Joist Hangers ......................................................108–110 Metal Lath ..........................................................205–212
Junior Diamond Mesh....................................................12 Metal Trims ..........................................................148-152
Junior™ Mesh................................................................208 Metal Trusses ......................................................116–120
Metric ..............................................................................5
■■■■■ K ■■■■■ Mini-Bead™ ..................................................................152
K-Bead ......................................................................152 Mold ..............................................................................9
Kal Corner Bead® ........................................................152 MSDS Sheets ......................................Inside Back Cover
Katz Blocking ................................................................51 Mudable J-Bead — Vinyl ............................................164
Keene™ ........................................................................12
Kerfed Bullnose ..................................................136, 159 ■■■■■ N ■■■■■
Knockouts ..............................................................25, 60 Nonload Bearing ............................................................21
Knockouts Drywall ........................................................25 Nonload-Bearing Walls ............................................24–30
KSI ..................................................................................4 Nonstructural Framing ..................................................21
Nonstructural Studs ................................................24-30
■■■■■ L ■■■■■
L-Headers ....................................................................68 ■■■■■ O ■■■■■
L-Trim — Metal ..........................................................150 One-Coat Veneer Beads & Trims ........................184–187
L Stop Bead — Vinyl ..................................................165 Overlap Details — Paper-Backed Lath ......207, 210, 211
L-Angle ....................................................................42, 92 Over Track................................................................35, 66

219
■■■■■ P ■■■■■ ■■■■■ S ■■■■■

Painted Bullnose Corner Beads ................................147 S-Series™ Support Clip ..........................................80, 104
Paper-Faced Beads & Trims Screeds
Index
Paper-Faced 3/4 Bullnose Off-Angle Sill Screed ............................................................202

Outside Corner — Nail-On ..........................177 SI36 5-1/2" Sill Screed ........................................202
Paper-Faced 3/4 Bullnose Off-Angle 1-3/8" J-Metal Trim ..............................................203
Outside Corner — Tape-On ........................175 J-Weep High-Back Plaster Stop ........................204
Paper-Faced 3/4 Bullnose Outside Corner — FHA #7 Foundation Screed ................................202
Nail-On ..........................................................176 Econo Screed ......................................................202
Paper-Faced 3/4 Bullnose Outside Corner — Screw Bar ....................................................................43
Tape-On ........................................................174 Security Lath ..............................................................216
Paper-Faced 3/4 Bullnose Wide Flange Seismic Ties ................................................................120
Self-Furring Dimpled Lath ..........................................209
Outside Corner — Nail-On ................................
Self-Furring V-Groove Mesh Lath ..............................210
Paper-Faced Drywall Corner Beads ............170–171
Shaftwall/Stairwell Framing ........................................124
Paper-Faced Inner Cove Trim — Tape-On ..........178
Shallow-V E.I.F.S. Expansion Joint ............................200
Paper-Faced Metal Inside Corner — Tape-On ....172
Shear Wall Strapping ....................................................89
Paper-Faced Metal L-Trim — Tape-On ..............179
Shiny 90 ......................................................................133
Paper-Faced Metal Off-Angle Inside Corner ......173 Shiny Corner Bead ......................................................133
Paper-Faced Metal Off-Angle Outside Corner — Shop Drawings ..............................................................19
Tape-On ........................................................171 Short-Flange Casing Bead ..................................194, 195
Paper-Faced Metal Outside Corner — Tape-On ..170 Sill Screeds ........................................................202–204
Paper-Faced Metal Reveal Trim — Tape-On ........180 Simpson™ Hangers ..............................................108–111
Paper-Backed Metal Lath ....................................206–212 Simpson™ Holdowns ....................................................85
Partition End Cap — Vinyl ..........................................166 Simpson™ Lateral Tie Plate ..........................................112
Party Wall ............................................................126–127 Simpson™ Seismic Ties................................................120
Physical Properties ................................inside back cover Simpson Strong-Tie™ ....................................................12
Plant Locations ................................................................3 Simpson™ Tension Ties ..............................................107
Plaster Beads & Trims ........................................188–201 Single-Leg Resilient Channel ........................................46
Plaster Casing Beads ..........................................192–195 Skewable Angle Hangers ............................................111
Plaster Control Joints ..........................................196–201 Slide Clips ..............................................................75–76
Plaster Corner Beads ..................................188–189, 196 Slip Connectors/Accessories ..................................72–77
Prefabricated Metal Trusses ................................118–119 Slip Track — Drywall ....................................................32
Press Brake Shapes ......................................................53 Slip Track — Structural ............................................62–63
Product Specification ..........................................222-223 SLP-TRK® ................................................................12, 32
Product Submittal ................................inside back cover Slotted Slip Track — Drywall ........................................32
Slotted Slip Track — Structural ..............................62–63
■■■■■ Q ■■■■■ Slotted Track ..................................................................32
Sound Channel (RC Series) ..........................................46
QuickClip ....................................................................77
™
Sound Rated Assemblies ..............................................46
Quicksilver® ..................................................................12 Spackle J-Metal ..........................................................149
Quicksilver™ Corner Bead ..........................................133 Span Tables ..........................................inside back cover
Spazzer™ 5400 ..............................................................12
■■■■■ R ■■■■■ Spazzer™ 9200 ..............................................................12
Spazzer® Bar Guard™ ....................................................86
Race Track Bead..........................................................180 Spazzer® Bridging Bars............................................36, 86
RC-1 & RC-2 ..................................................................46 Specifications ..................................................................5
RC Deluxe™ ..............................................................12, 46 Splayed Bullnose Corner Bead — Vinyl ....................158
Recycled Content ........................................................11 Splayed Corner Angle ..................................................42
Resilient Channel ..........................................................46 Splayed Corner Bead — Metal....................................135
Rigid Connectors/Accessories ................................79–84 Splayed Corner Bead — Vinyl ....................................157
Rim Joist ....................................................................102 Squash Blocks ............................................................106
Rip Bead™ ....................................................................12 SSMA ..............................................................................4
Rip L-Bead ..................................................................165 Standards ........................................................................5
Roof Trusses ........................................................115-120 STC Rating ....................................................................46
Runner Track ..........................................................26–28 Steel Thickness................................................................5
Strip Lath ............................................................190, 213
Stucco Products ................................................188–204
Index
Structural Blocking ....................................................103 Galvanized ....................................................188

Structural Studs ......................................................58-59 Mini-Bead™ 800 and Mini-Bead 900 ....................184
Studs, Steel ............................................................24, 58 Veneer Trims 701A J Trim ....................................186
Submittals ..........................................Inside Back Cover Veneer Trims 701B and 801B L Trim ....................187
SuperDrive™ ....................................................................12 Control Joint #093 ..............................................151
Support Clips (A-Series™) ............................................84 Double-X Corner Bead — Galvanized (CBXX) ....189
Support Clips (B-Series™) ............................................82 Vinyl Corner Beads & Trims
Support Clips (E-Series™) ......................................79, 104 Vinyl Corner Bead ................................................156
Support Clips (S-Series™) ....................................80, 104 Vinyl #1 with 2-1/2" Legs ....................................156
Support Clips (U-Series™) ............................................81 Vinyl Splayed Corner Bead (120/135˚) ................157
Support Clips (X-Series™) ..............................................83 Vinyl Archway Corner Bead ................................157
Vinyl Bullnose ......................................................158
■■■■■ T ■■■■■ Vinyl Bullnose Splayed ........................................158
Vinyl Bullnose Arch Bead ....................................159
Tabbed Track ..............................................................125 Vinyl Bullnose Kerf ................................................159
Technical Services ........................................................19 Vinyl J-Bead ........................................................164
Tension Bracing ..........................................................107 Vinyl Mudable J-Bead ........................................164
Termites ..........................................................................9 Vinyl L-Stop ........................................................165
Thickness ........................................................................5 Vinyl Rip Bead ....................................................165
Tie Wire ........................................................................44 Vinyl Partition Cap ..............................................166
Top & Bottom Plate — Drywall ..............................26–28 Vinyl 093 Control Joint ........................................166
Top & Bottom Plate — Structural ................................55 Vinyl Corp.......................................................................17
Track, Drywall ..........................................................26-28
Track, Structural ............................................................61
■■■■■ W ■■■■■
TradeReady® ..................................................................12
TradeReady® Floor System ..................................100-103 Warranty ..........................................................................5
TradeReady® Header......................................................69
TradeReady® Spazzer® 5400 Bar ..................................86 Web Site ................................................inside back cover
TradeReady® Spazzer® 9200 Bar ..................................36 Web Stiffeners ............................................................106
Transition Caps ....................................................138-139
Trim Products ■■■■■X ■■■■■
Clinch-On Products, Inc. ..............................140–147 X-Bracing ......................................................................90
Metal ............................................................132–152 X-Series™ Support Clip ..................................................83
Paper-Faced ................................................167–180
Veneer ..........................................................184–187 ■■■■■ Y ■■■■■
Vinyl ..............................................................156–166
Truss Framing ......................................................115-120 Yield Strength ........................................................4, 223
Truss Types ..................................................................117
■■■■■Z ■■■■■
■■■■■ ■■■■■ Z-Bar ........................................................................48
U Z-Furring Channel ........................................................48
U-Series Support Clip ..................................................81
™
Z-Riblath ......................................................................211
U-Trim — Metal (M20A) ..............................................149 Zinc Control Joint 100, 38, 50 & 75 ............................197
U-Channel ..............................................................37, 87 Zinc Control Joints ......................................................151
UL™ Listed ..............................................32, 62, 100, 118 Zinc Mini-Bead™ ..........................................................184
Ultra-Span® ....................................................................12
Uni-Clip™ ................................................................12, 78
Utility Angle ............................................................42, 92
■■■■■ V ■■■■■
V-Goove Lath ..............................................................210
Veneer Beads & Trims ........................................184–187
Veneer Casing Beads ..........................................186–187
Veneer Control Joints ..................................................185
Veneer Corner Beads ..................................................152
Vinyl #1 Corner Bead ..................................................156
Vinyl Corp.......................................................................13
Veneer Plaster: Trims & Accessories
1A Expanded-Flange Corner Bead —

221
Dietrich04_222-223 3/23/04 4:34 PM Page 222
MATERIAL
CERTIFICATION
Dietrich Metal Framing certifies that Dietrich™ building ASTM Specification
products meet or exceed the applicable standards listed below. Descriptions
A591
Design Specification (AISI) Standard Specification for Steel Sheet,
“Specifications for the Design of Cold-Formed Steel Structural Members” Electrolytic Zinc-Coated, for Light Coating
Weight [Mass] Applications
Product Specification (ASTM) A653

Standard Specification for Steel Sheet, Zinc-
Drywall (nonstructural) Framing and Accessories ......................................................C645
Coated (Galvanized) or Zinc-Iron Alloy Coated
Structural Framing and Accessories............................................................................C955 (Galvannealed) by Hot-Dip Process
Plastering Steel Products ............................................................................................C847 A1003

Veneer and Plaster Accessories ......................................................................C841/C1063 Standard Specification for Steel Sheet,
Carbon, Metallic- and Nonmetallic-Coated
Beads and Trims – Metal – Paper – Vinyl..................................................................C1047 for Cold Formed Framing Members
B69
Material Specification (ASTM) Standard Specification for Rolled Zinc
Drywall (nonstructural) Framing – No accessories........................................A1003 (NS33) C645
Structural Framing and Accessories ........................A1003(ST33L, ST33H, ST50L, ST50H) Standard Specification for Nonstructural Steel
Framing Members
Plastering Steel Products ............................................................................................A653
C841
Veneer and Plaster Accessories ..........................................................................A653/B69
Standard Specification for Installation of
Beads and Trims – Metal – Paper – Vinyl ..........................................................A653/A591 Interior Lathing and Furring
C847
Coating Specification (ASTM) Standard Specification for Metal Lath
Drywall (nonstructural) Framing and Accessories ..........................................C645(G40EQ)
C955
Structural Framing and Accessories ..............................................................C955 (G60EQ) Standard Specification for Load-Bearing
(Transverse and Axial) Steel Studs, Runners
Plastering Steel Products ............................................................................................A653 (Tracks), and Bracing or Bridging for Screw
Veneer and Plaster Accessories ................................................................................C1063 Application of Gypsum Panel Products and
Metal Plaster Bases.
Beads and Trims – Metal – Paper – Vinyl..................................................................C1047
C1047
Additional Information Standard Specifications for Accessories for
Gypsum Wallboard and Gypsum Veneer Base
MSDS, limiting heights, code-body reports and individual product specification sheets are
C1063
available at www.dietrichmetalframing.com
Standard Specifications for Installation of
Lathing and Furring to Receive Interior and
Exterior Portland Cement-Based Plaster.

222
Dietrich04_222-223 3/23/04 4:34 PM Page 223
Plant Locations
World Headquarters
500 Grant Street, Suite 2226
Coating Specifications Explained 412-281-2805 phone

412-281-2965 fax
Product Line Coating Description
Drywall Products G40 Minimum Nonstructural products have a coating conforming

(Nonstructural) or equivalent to ASTM Specification A 1003-G40 minimum weight Arizona Phoenix ............... 602-447-0204
or have a protective coating with the industry standard Goodyear............. 623-932-1407
requirements of ASTM C 645
Structural G60 Minimum Structural products have a protective coating Stockton.............. 209-547-9066
or Equivalent conforming to ASTM Specification A 1003 – G60 Colorado Denver ................ 303-289-4092
minimum coating weight or have a protective
Florida Miami.................. 305-652-5423
coating with an equivalent corrosion resistance. This
coating weight is in accordance with the industry Wildwood ............ 352-748-7200
standard requirements of ASTM C955. Georgia McDonough........ 678-304-5500
Hawaii Kapolei ................ 808-682-5747
Special Orders G90 Protective A G90 coating weight is available on a special order
Illinois Joliet ................... 815-207-0110
Coatings basis and must be specified at the time of ordering.
A G90 coating is not considered an industry standard and Indiana Hammond ........... 219-931-3741
may result in additional cost and extended delivery times. Kansas Lenexa ................ 913-599-2026
Yield Strength, Fy/(PSI or KSI) Massachusetts Lunenburg........... 978-342-9742

Yield strength is the property by which the strength of steel is typically defined. Dietrich products are Ohio Warren ................ 330-372-4014
manufactured with steel having a yield point of 33 KSI for all gauges. 50 KSI is available in 16, 14 and South Carolina Rock Hill.............. 803-324-4144
12 gauge and must be specified when ordering. KSI is short for kips per square inch. One kip is equal
Texas Baytown .............. 281-383-1617
to 1,000 pounds.
Hutchins.............. 972-225-1100
Steel Thickness with Color Code International Miami.................. 305-652-5423
Thickness ASTM
Gauge Mils Design Thickness
Inches (mm)
Minimum Thickness
Inches (mm)
Color
Code*
Technical Services
25 18 0.0188 0.48 0.0179 0.45 None Dietrich Design Group North .......... 800-873-2443
22 27 0.0283 0.72 0.0269 0.68 Black
20 DW 30 0.0312 0.79 0.0296 0.75 Pink or ............................... 219-853-9474
20 STR 33 0.0346 0.88 0.0329 0.84 White Dietrich Design Group South......... 800-969-4110
18 43 0.0451 1.14 0.0428 1.09 Yellow
16 54 0.0566 1.44 0.0538 1.37 Green or .............................. 678-304-5525
14 68 0.0713 1.81 0.0677 1.72 Orange
12 97 0.1017 2.58 0.0966 2.45 Red
*Color coded product may or may not be available. Varies by market.
Minimum thickness is 95% of the design thickness per AISI code
Recycled Content
Light gauge steel framing is recognized as a recycled content product with the LEED Green Building
Rating System**. Dietrich Metal Framing™ products contain a high content of recycled steel.
** LEED and LEED Green Building Rating System are service marks of the U.S. Green Building Council.
223
Dietrich04_224 3/23/04 4:18 PM Page 224
LEED CERTIFICATION*
Earn LEED™ Certification 2.1

with Dietrich Metal Framing
LEED™ stands for Leadership in Energy &
Environmental Design. LEED Green Building
Rating System™, as promulgated by the U.S.
Green Building Council, is to improve envi-
ronmental and economic performance of
commercial buildings using established or advanced industry
principles, practices, materials and standards.
Dietrich recognizes the importance and growing agenda of Materials
LEED. We are members of the U.S. Green Building Council and and Resources
have LEED™ Accredited Professionals on staff. Material Credit #4.1 – Recycled Content (5%)
Dietrich products contain a high content of

Dietrich Metal Framing can contribute significantly towards recycled steel.
achieving LEED™ credits in several areas. Please contact your Material Credit #4.2 – Recycled Content (10%)
Dietrich representative for assistance with your next project. Dietrich products contain a high content of
recycled steel.
Material Credit #5.1 – Regional Materials

(500 mile radius)
Dietrich’s 38 sales and manufacturing

locations are located within 300 miles of
85% of the U.S. population.
Innovation
& Design Credits
ID Credits 1.1 to 1.4 – Innovation in Design
Due to the high-recycled content of

Dietrich’s products, we believe there is a
potential for innovation credits for
exceptional performance.
In addition, projects with complete

metal-framed structures could qualify for
innovative design credits.
ID Credit 2.1 – LEED™ Accredited Professional

Dietrich is currently the only metal framing
manufacturer to have a LEED™ Accredited
Professional on staff.
* LEED and LEED Green Building Rating System are
service marks of the U.S. Green Building Council

224
Dietrich04_IBC 3/23/04 5:05 PM Page 1
dietrichmetalframing•com
The place to stop…before the building starts!
SM
www.dietrichmetalframing.com is one of the most advanced

resources for metal framing information in the industry. From
extensive product information to on-line catalogs, to video
installations, this site is your resource to building better, faster
and more profitably. Simply click on any one of our animated
value-added product assemblies for your own personal product
demonstration. You are one click away from adding more profit
to your bottom line.
This website is packed with everything from a basic introduction

to metal framing to elaborate design and productivity tools
including the member sizer program. The construction docu-
ments library features every-
thing from download-
able/customizable specifi-
cations, certifications,
MSDS, to ICBO, BOCA and
all major code approvals.
Looking for alternative
building details, you will
find one of the industry’s
most extensive light-gauge
CAD libraries. This library
is filled with framing alter- Need submittals?
natives that improve efficiency
Dietrich’s on-line submittal system is the easiest way to create
and drive profit to your bottom line.
job submittals. Point, click and print for fast, professional
project submittals.
We make it easy for you to do business!
request a quote online @ dietrich metalframing •com

Document1 3/23/04 5:28 PM Page 1
Plant Locations
World Headquarters
500 Grant Street, Suite 2226
412-281-2805 phone
412-281-2965 fax
Arizona Phoenix ............... 602-447-0204

Goodyear............. 623-932-1407
Stockton.............. 209-547-9066
Colorado Denver ................ 303-289-4092
Florida Miami.................. 305-652-5423
Wildwood ............ 352-748-7200
Georgia McDonough........ 678-304-5500
Hawaii Kapolei ................ 808-682-5747
Illinois Joliet ................... 815-207-0110
Indiana Hammond ........... 219-931-3741
Kansas Lenexa ................ 913-599-2026
Massachusetts Lunenburg........... 978-342-9742
Ohio Warren ................ 330-372-4014
South Carolina Rock Hill.............. 803-324-4144
Texas Baytown .............. 281-383-1617
Hutchins.............. 972-225-1100
International Miami.................. 305-652-5423
Other Dietrich Locations

and Divisions
Aegis Metal Framing ...................... 314-851-2200
Clinch-On Products, Inc...................352-799-1798
Vinyl Corp. ...................................... 800-648-4695
Dietrich Building Systems.............. 216-472-1511
Dietrich Cimple Steel Solutions...... 512-249-6681
Dietrich Design Group North .......... 800-873-2443
or ............................... 219-853-9474
Dietrich Design Group South......... 800-969-4110
or .............................. 678-304-5525
Dietrich Residential Steel Systems... 614-840-4529
About Worthington Industries

Worthington Industries is a leading diversified metal processing company with annual sales of approximately
$2 billion. The company is a premier value-added steel processor and a leader in manufactured metal products
such as automotive past model stampings, pressure cylinders, metal framing, metal ceiling grid systems and
laser welded blanks.
Headquartered in Columbus, Ohio, Worthington employs over 8,000 people and operates 63 facilities in 10 coun-
tries. Worthington has been ranked numerous times as “One of the Top 100 Companies to Work for in America.”
©Copyright 2004 by Dietrich Metal Framing. All rights reserved. DMF03/2004

Printed in USA

Metal Framing and Finishing Catalog

Uploaded by

Copyright:

Available Formats

Metal Framing and Finishing Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Metal Framing and Finishing Catalog

Uploaded by

Copyright:

Available Formats

What products does Dietrich Metal Framing produce?

What products does Dietrich Metal Framing produce?

What benefits can customers expect from Dietrich Metal Framing?

What benefits can customers expect from Dietrich Metal Framing?

Document1 3/23/04 5:18 PM Page 1

■ Metal Beads & Trims

■ Vinyl Beads & Trims

■ Paper-Faced Beads & Trims

■ Veneer, Stucco & Plaster

The place to stop…before the building starts!

The Value You Receive

Interior Framing . . . . . . . . . . . . . 21–54

Exterior Framing. . . . . . . . . . . . . 55–94

We Go the Extra Mile

Truss Framing. . . . . . . . . . . . . 115–120

Vinyl Beads & Trims . . . . . . . . 153–166

Your Best Value™ Cover photo courtesy of GQ Contracting

Fast, Flexible and Responsive Service Goodyear

■ Full or LTL Deliveries

Your Local Supplier Kansas Lenexa ................ 913-599-2026

Other Dietrich Divisions

Baytown Dietrich Residential Steel Systems... 614-840-4529

EVERYTHING you need, when you need it,

dietrich metalframing •com

High Fill Rates

New Product Development

how you need it and where…

High Strength/Light Weight/Versatile

dietrich metalframing •com

What about Cost?

h STEEL today... ■ Lower costs for construction and

Fire Resistance Termites Mold

dietrich metalframing •com

■ Interior nonload-bearing studs are cut

s that will LAST A LIFETIME.

Environmental Live and North America’s Most

the BRANDS you KNOW!

Dietrich Metal Framing and Dietrich are trade

BUCKET that may save your BUTT!

TradeReady® Area Separation Wall CT Cavity Shaft Wall

*Ultra-Span is a registered trademark of Aegis Metal Framing LLC.

dietrich metalframing •com

We Get It Right the First Time

“Can Do” Attitude

Your Business Is Built on Service

Architects and Specifiers

Engineering and Design Professionals

CAD Library IA UNT

■ Design Build Assistance ON S NST

FREE Preliminary Design Certified Shop

Dietrich Design Group (North) ■ Dietrich Design Group (South) ■

In addition to supplying world-class products, we provide

Our years of expertise afford us with the

dietrich metalframing •com

Interior (Drywall) Interior (Drywall) Deflection Interior (Drywall) Framing

corrosion resistant, galvanized steel. These chan-

Interior Framing Overview

Low-cost, noncombustible framing for partition

Interior (Drywall) Nonload-Bearing, Nonstructural Framing

Conveniently placed holes