Endplmc9 - End Plate Moment Connections

"ENDPLMC9" --- END PLATE MOMENT CONNECTIONS
Program Description:
"ENDPLMC9" is a spreadsheet program written in MS-Excel for the purpose of analysis and design of end plate
moment connections per the AISC 9th Edition (ASD) Manual. Specifically the program can analyze both single
4-tension bolt and 8-tension bolt configurations, as well as the conditions of having moment connections on
each side of the column attached to the column flanges.
This program is a workbook consisting of five (5) worksheets, described as follows:
Worksheet Name
Description
Doc
4-Tension Bolt MC
(2) 4-Tension Bolt MC's
8-Tension Bolt MC
(2) 8-Tension Bolt MC's
This documentation sheet

Single 4-tension bolt end plate moment connection
Double 4-tension bolt end plate moment connections
Single 8-tension bolt end plate moment connection
Double 8-tension bolt end plate moment connections
Program Assumptions and Limitations:

1. This program uses the database of member dimensions and section properties from the "AISC Shapes
Database", Version 3.0 (2001) as well as the AISC 9th Edition (ASD) Manual (1989).
2. This program is based on the non-seismic specific design procedures found in the following two references:
a. "Moment Connections - End Plate (Static Loading Only)" on pages 4-116 through 4-125
(Static Loading Only)" on pages 4-116 through 4-125, AISC 9th Edition (ASD) Manual (1989).
b. "Extended End-Plate Moment Connections" - AISC Steel Design Guide Series #4,
by Thomas M. Murray, PhD, P.E., First Edition (AISC 1990).
3. This program also refers to "Extended End-Plate Moment Connections" - AISC Steel Design Guide Series #4,
First Edition (1990), by Thomas M. Murray, PhD, P.E.
4. This program contains numerous comment boxes which contain a wide variety of information including
explanations of input or output items, equations used, data tables, etc. (Note: presence of a comment box
is denoted by a red triangle in the upper right-hand corner of a cell. Merely move the mouse pointer to the
desired cell to view the contents of that particular "comment box".)
"ENDPLMC9.xls" Program
Version 1.1
END PLATE MOMENT CONNECTION

Job Name:
Job Number:
Using Unstiffened End Plate Field Bolted to Column Flange

and 4-Tension Bolt Analysis Method Per AISC 9th Edition (ASD)
Subject:
Originator:
Checker:
Input Data:
Beam and Column Data:
Beam Size =
Column Size =
Beam Yield Stress, Fyb =
Column Yield Stress, Fyc =
Connection Loadings:
Beam End Moment, M =
Moment Includes Wind or Seismic?
Beam End Reaction (Shear), R =
Beam Axial Force, P =
Connection Data and Parameters:
End Plate Length, Lp =
End Plate Width, Bp =
End Plate Thickness, tp =
End Plate Yield Stress, Fyp =
ASTM Bolt Desig. (A325 or A490) =
Bolt Type (N, X, or SC) =
Bolt Hole Type (in End Plate) =
Diameter of Bolts, db =
Total Number of Bolts, Nb =
Tension Bolts Vertical Spacing, S =
Dist. to Outer Tension Bolts, D1 =
Bolt Gage in Column, g =
Edge Distance for End Plate, ED =
Col. Web Doubler Plate Thk., td =
Doubler Plate Yield Stress, Fyd =
Stiffener Plate Thickness, ts =
Stiffener Plate Yield Stress, Fys =
Full-Depth or Half-Depth Stiffeners?
###
###
###
###
###
###
W16x36
###
C.L. Column
W14x90
End Plate ("tp" x "Bp" x "Lp") ###
36
###
ksi
36
###
ksi
ED
###
Stiffener
D1
(both
###
S
sides)
120.00
###
ft-k
(Beam)
No
###
30.00
A325
kips
P
3"
M
0.00
A490
kips
(Min.)
N
R
X
21.750
SC
in.
S
D1
8.000
Standard
in.
Stiffener
ED
(both
0.7500
Oversized
in.
sides)
36
###
ksi
A325
"Nb" - "db" Bolts on "g" Gage ###
N
###
Standard
Nomenclature
###
0.875
###
in.
8
###
3.250
Member Properties:
###
in.
1.375
Beam:
###
in.
5.500
d = 15.900 in.
###
in.
1.500
tw = 0.295 in.
###
in.
0.375
bf
=
6.990
###
in.
in.
36
tf =
0.430 in.
###
ksi
0.5000
k = 0.8320 in.
###
in.
36
Column:
###
ksi
Full-Depth
d = 14.000 in.
###
tw = 0.440 in.
###
bf = 14.500 in.
###
tf =
0.710 in.
###
k = 1.3100 in.
Yes
k1 = 1.4375 in.
No
Full-Depth
Half-Depth
Rp =
Shear Stres
fv =
Fv =
Column Web
Column We
3 of 26
03/02/2015 16:50:17
Version 1.1
(continued)
4 of 26
03/02/2015 16:50:17
Version 1.1
tw(req'd) =
Results:
Column We
td(min) =
Bolt Design:
Horizontal Force at Beam Flange:
Ff = 93.08 kips
Web Double
Vd =
Lw =
fw =
=
Bolt Tension and Shear:
Ab = *db^2/4
(min) =
Ab = 0.6013 in.^2
(max) =
V = 15.00 kips
V = (R/Nb)*(4 bolts) (portion of end shear taken by 4 tension bolts)
fv =
6.24
fv = (V/(4 bolts))/Ab (shear stress on 4 tension bolts)
Web Double
ksi
ft = 38.70 ksi
ft = (Ff/(4 bolts))/Ab (4 tension bolts acting at one time)
h/twc =
Fv = 21.00 ksi
Fv = 21.0 from AISC Table J3.2 (for N bolts in shear)
h/twc(max) =
Vb = 12.60 kips/bolt
Vb = Fv*Ab
h/td =
Ft = 42.02 ksi
Ft = SQRT(44^2-4.39*fv^2) (for N, X bolts in tension)
h/td(max) =
B = 25.30 kips/bolt
B = Ft*Ab (for N, X bolts in tension)
Column Stiffe
T(cap) = 101.20 kips
T(cap) = B*(4 bolts) (for N, X bolts in tension)
T(cap) >= Ff,Fyc(use)
O.K. =
V(cap) = 74.44 kips
V(cap) = Vb*(Nb-4)+SQRT(((44*Ab*4)^2-Ff^2)/4.39) (for N, X bolts)
Local Web Y
V(cap) >= R, O.K.Pbf =
End Plate Design:
Pwy =
Top Flange to End Plate Welding:
Compressiv
Lw = 14.545 in.
Lw = 2*(bf+tf)-tw
Pbf =
fw = 6.399 kips/in.
fw = Ff/Lw
Pwb =
= 0.4310 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
Local Flange
(min) = 0.2500 in.
(min) = Min. fillet weld size from AISC Table J2.4, page 5-67
Pbf =
Pf =
End Plate Required Thickness:
bp =
Bp(max) = 7.990 in.
Bp(max) = bf+1"
Pec =
D = *16, rounded up to nearest 1/16"
D=
7
Ca =
Pf = 1.4450 in.
Pf = maximum of: D1 or S-(D1+tf)
Cb =
Pe = 0.917 in.
Pe = Pf-(db/4)-0.7071*D/16
Afc/Awc =
m =
Ca =
1.13
Ca = 1.13 for Fyb = 36 ksi, Ca = 1.11 for Fyb = 50 ksi
Cb = 0.935
Cb = SQRT(bf/Bp(max))
Me =
Af/Aw = 0.677
Af/Aw = (bf*tf)/((d-(2*tf))*tw)
tfc(req'd) =
m = 0.939
m = Ca*Cb*(Af/Aw)^(1/3)*(Pe/db)^(1/4)
Pfb =
Me = m*Ff*Pe/4
Me = 20.04 in.-kips
Stiff. Req'd?
tp(req'd) = 0.746 in.
tp(req'd) = SQRT((6*Me)/(Bp*(0.75*Fyp)))
tp >= tp(req'd), O.K.
Column Stiffe
Required Ar
Beam Web to End Plate Welding:
Ps =
fw = 3.186 kips/in.
fw = maximum of: (0.60*Fyb)*tw/2 or R/(2*(d/2-tf))
As(req'd) =
= 0.2146 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
Stiffener Wid
(min) = 0.2500 in.
(min) = Min. fillet weld size from AISC Table J2.4, page 5-67 bs(min) =
bs(use) =
Bolt Bearing on End Plate:
Stiffener Thi
Fu = 58.00 ksi
Fu = 58 for Fyp = 36, Fu = 65 for Fyp = 50
ts(min) =
Rpe = 65.25 kips
Rpe = 2*(0.5*Fu*(ED)*tp) (based on bolt edge distance)
Stiffener Len
Rps = 274.05 kips
Rps = 2*(1.2*Fu*tp*db*(Nb/2-1)) (based on bolt spacing)
Ls(min) =
Rp = 339.30 kips
Rp = Minimum of: Rpe+Rps or 1.2*Fu*tp*db*Nb
Ls(use) =
Rp >= R, O.K.
Provided Are
Shear Stress (out of plane) on End Plate:
As(prov) =
fv =
7.76
fv = Ff/(2*Bp*tp)
Check Stiffe
ksi
Fv = 14.40 ksi
Fv = 0.40*Fyc
Fv >= fv, O.K.
b/t =
Assume 1/2 of beam axial force is also taken at each flange
Ff = (M*12)/(d-tf)+P/2
(continued)
5 of 26
03/02/2015 16:50:17
Version 1.1
Stiffener We
Column Web Doubler Plate Requirement:
Column Web Panel Shear:
F = 95.33 kips
F = M*12/(0.95*d)
tw(req'd) = F/(0.4*Fyc*dc)
tw(req'd) = 0.473 in.
Ps =
Lw =
fw =
=
twc < tw(req'd)
(min) =
Web doubler plate is req'd.
Column Web Doubler Plate:

td(min) = 0.250 in.
Stiffener We
td(min) = (tw(req'd)-twc)*Fyc/Fyd but not < 1/4" min.
Ps =
td >= td(min), O.K. Lw =
Web Doubler Plate Welding:
fw =
Vd = F*td/(td+twc) (at each vertical edge)
=
Vd = 43.86 kips
(min) =
Lw = 15.90 in.
Lw = d (plate height = beam depth)
(max) =
fw =
2.76
fw = Vd/Lw
kips/in.
= 0.1858 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
W27x258
(min) = 0.1875 in.
W27x235
(max) = 0.3637 in.
(max) =
0.40*Fyd*td/((SQRT(2)/2)*0.30*70)
W27x217
Weld size <= weld max., O.K. W27x194
Web Doubler Plate Plug Welding Requirements:
W27x178
h/twc = 28.59
h/twc = (dc-2*tfc)/twc
W27x161
h/twc(max) = 63.33
h/twc(max) = 380/SQRT(Fyc)
h/twc <= h/twc(max), O.K.
W27x146
h/td = 33.55
h/td = (dc-2*tfc)/td
W27x129
h/td(max) = 63.33
h/td(max) = 380/SQRT(Fyd)
h/td <= h/td(max), O.K.
W27x114
Conclusion: Plug welds are not required
W27x102
Column Stiffener Requirements:
Local Web Yielding:
Pbf = 155.13 kips
Pwy = 168.93 kips
(Assume Fyc = 36 ksi, per AISC Design Guide Series #4)

Stiffeners not req'd. at both flanges if: Pbf <= Pwy
Pbf = (5/3)*Ff
Pwy = Fyc*twc*(tf+6*k+2*tp+2*(D/16))
Pbf <= Pwy, O.K.
Compressive Buckling of Web:

Pbf = 155.13 kips
Pwb = 184.14 kips
Stiffeners not required at compression flange if: Pbf <= Pwb

Pwb = 4100*twc^3*SQRT(Fyc)/(dc-2*k)
Pbf <= Pwb, O.K.
Local Flange Bending:

Pbf = 155.13
Pf = 1.4450
bp = 8.300
Pec = 1.094
Ca =
1.13
Cb =
1.00
Afc/Awc =
1.00
m = 1.195
Pfb = 57.63
kips
in.
in.
in.
kips
Stiffeners not required at tension flange if: Pbf <= Pfb

Pf = maximum of: D1 or S-(D1+tf)
bp = 2.5*(Pf+tf+Pf) (effective column flange length)
Pec = (g/2)-k1-(db/4)
Ca = 1.13 (for Fyc =36 ksi)
Cb = 1.0 (assumed)
Afc/Awc = 1.0 (assumed)
m = Ca*Cb*(Af/Aw)^(1/3)*(Pec/db)^(1/4)
Pfb = ((tfc^2*(0.75*Fyc)*bp)/6)/(m*Pec/4)
Pbf > Pfb, Fail
Conclusion: Stiffeners are required
W27x94
W27x84
W24x492
W24x450
W24x408
W24x370
W24x335
W24x306
W24x279
W24x250
W24x229
W24x207
W24x192
W24x176
W24x162
W24x146
W24x131
W24x117
W24x104
W24x103
W24x94
W24x84
W24x76
W24x68
W24x62
W24x55
W21x402
W21x364
W21x333
(continued)
6 of 26
03/02/2015 16:50:17
Version 1.1
W21x275
W21x248
W21x223
Ps = Pbf-(Minimum of Pwy,Pwb, or Pfb) (design force)
W21x201
Ast = Ps/Fys
W21x182
W21x166
Stiffener Width:
W21x147
bs(min) = 2.447 in.
bs(min) = Bp/3-twc/2
W21x132
bs(use) = 7.000 in.
bs(use) = bfc/2-twc/2 (rounded down to nearest whole inch)
W21x122
W21x111
Stiffener Thickness:
W21x101
ts(min) = 0.442 in.
ts(min) = larger of: tp/2 or bs(use)*SQRT(Fyc)/95
W21x93
ts >= ts(min), O.K. W21x83
Stiffener Length:
W21x73
Ls(min) =
6.29
Ls(min) = dc/2-tfc
W21x68
in.
Ls(use) = 12.58 in.
Ls(use) = dc-2*tfc
W21x62
W21x57
Provided Area of Pair of Stiffeners:
W21x55
As(prov) = 7.000 in.^2
As(prov) = 2*bs(use)*ts
As(prov) >= As(req'd), O.K.
W21x50
W21x48
Check Stiffener Slenderness:
W21x44
b/t = 14.00
b/t = bs(use)/ts
W18x311
b/t(max) = 15.83
b/t(max) = 95/SQRT(Fys)
b/t <= b/t(max), O.K. W18x283
W18x258
Stiffener Welding to Column Flange:
W18x234
Ps = 97.50 kips
W18x211
Lw = 44.50 in.
Lw = (bfc/2-(k1+0.25))*8
W18x192
fw =
1.31
fw = Ps/(1.67*Lw)
W18x175
kips/in.
= 0.0884 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
W18x158
(min) = 0.2500 in.
W18x143
W18x130
Stiffener Welding to Column Web:
W18x119
Ps = 97.50 kips
W18x106
Lw = 43.52 in.
Lw = (dc-2*(k+0.25))*4
W18x97
fw =
1.34
fw = Ps/(1.67*Lw)
W18x86
kips/in.
= 0.0903 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
W18x76
(min) = 0.1875 in.
W18x71
(max) = 0.2133 in.
(max) =
0.40*Fyc*twc/((SQRT(2)/2)*0.30*70*2)
W18x65
W18x55
Comments:
W18x50
W18x46
W18x40
W18x35
W16x100
W16x89
W16x77
W16x67
W16x57
W16x50
W16x45
W16x40
W16x36
Column Web Stiffener Design:

Required Area of Stiffener:
Ps = 97.50 kips
As(req'd) = 2.708 in.^2
7 of 26
03/02/2015 16:50:17
Version 1.1
END PLATE MOMENT CONNECTIONS

Job Name:
Job Number:
Using Unstiffened End Plates Field Bolted to Both Column Flanges

Subject:
Originator:
Checker:
Input Data:
Beams and Column Data:
Left Side Beam Size =
Right Side Beam Size =
Column Size =
Yield Stress of Beams, Fyb =
Yield Stress of Column, Fyc =
W18x40
W16x40
W14x90
36
36
Left Beam Lateral Moment, M1L =
Left Beam Gravity Moment, M1G =
Left Beam End Reaction, R1 =
Left Beam Axial Force, P1 =
Right Beam Lateral Moment, M2L =
Right Beam Gravity Moment, M2G =
Right Beam End Reaction, R2 =
Right Beam Axial Force, P2 =
120.00
0.00
30.00
0.00
120.00
0.00
30.00
0.00
ft-k

Left Side End Plate Length, Lp1 =
Left Side End Plate Width, Bp1 =
Left Side End Plate Thk., tp1 =
Right Side End Plate Length, Lp2 =
Right Side End Plate Width, Bp2 =
Right Side End Plate Thk., tp2 =
ASTM Bolt Desig. (A325 or A490) =
Diameter of Bolts, db1 =
Total Number of Bolts, Nb1 =
Tension Bolts Vertical Spacing, S1 =
Bolt Gage in Column, g1 =
Edge Distance for End Plate, ED1 =
23.750
8.000
0.7500
21.750
8.000
0.7500
36
A325
N
Standard
0.875
8
3.250
1.375
5.500
1.500
0.875
8
3.250
1.375
5.500
1.500
0.375
36
0.5000
36
in.
ksi
ksi
ft-k
kips
kips
ft-k
ft-k
kips
kips
in.
in.
in.
in.
in.
ksi
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
ksi
in.
ksi
###
###
###
###
###
###
###
"Nb1" - "db1" Bolts on "g1"
Gage
###
C.L. Column
###
End Plate
Stiffener
(both
"tp2"x"Bp2"x"Lp2" ###
sides)
###
ED1
ED2
###
D1
D2
S1
S2 ###
###
(Left Beam)
(Right Beam)
A325
A490
P1
P2
3"
M1
M2 N
(Min.)
X
R1
R2
SC
Standard
S1
S2
D1
D2
Oversized
ED1
ED2
###
###
End Plate
"tp1"x"Bp1"x"Lp1"
###
Stiffener
###
Gage
(both
###
sides)
Nomenclature
###
Member Properties:
###
Left Beam:
###
d = 17.900 in.
###
tw = 0.315 in.
###
bf =
6.020 in.
###
tf =
0.525 in.
###
k = 0.9270 in.
###
Right Beam:
###
d = 16.000 in.
###
tw = 0.305 in.
###
bf =
7.000 in.
###
(min) =
tf =
0.505 in.
k = 0.9070 in.
Bolt Bearing
Column:
Fu =
d = 14.000 in.
Rpe =
tw = 0.440 in.
Rps =
bf = 14.500 in.
Rp =
tf =
0.710 in.
Shear Stres
k = 1.3100 in.
fv =
k1 = 1.4375 in.
Fv =
Right Side Bo
8 of 26
03/02/2015 16:50:17
Version 1.1
(continued)
9 of 26
03/02/2015 16:50:17
Version 1.1
M2t =
Ff =
Results:
Bolt Tension
Ab =
V=
M1t = M1L+M1G
fv =
Ff = (M1t*12)/(d-tf)+P1/2
ft =
Fv =
Ab = *db1^2/4
Fv =
V = (R1/Nb1)*(4 bolts) (portion of end shear taken by 4 tension bolts)Vb =
Ft =
Ft =
B=
Vb = Fv*Ab
B=
T(cap) =
T(cap) =
T(cap) >= Ff, O.K.
V(cap) =
V(cap) = Vb*(Nb1-4)+SQRT(((44*Ab*4)^2-Ff^2)/4.39) (for N, X bolts)
V(cap) =
V(cap) >= R1, O.K.
Right Side En
Left Side End Plate Design:
Top Flange t
Lw =
Lw = 12.775 in.
Lw = 2*(bf+tf)-tw
fw =
=
fw = 6.488 kips/in.
fw = Ff/Lw
= 0.4369 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
(min) =
(min) = 0.2500 in.
End Plate R
Bp2(max) =
D=
Bp1(max) = 7.020 in.
Bp1(max) = bf+1"
Pf =
D=
7
Pe =
Pf = 1.3750 in.
Pf = maximum of: D1 or S1-(D1+tf)
Ca =
Pe = 0.847 in.
Pe = Pf-(db1/4)-0.7071*D/16
Cb =
Ca =
1.13
Af/Aw =
m =
Cb = 0.926
Cb = SQRT(bf/Bp1(max))
Af/Aw = 0.595
Me =
m = 0.873
m = Ca*Cb*(Af/Aw)^(1/3)*(Pe/db1)^(1/4)
tp2(req'd) =
Me = m*Ff*Pe/4
Me = 15.32 in.-kips
Beam Web
tp1(req'd) = 0.652 in.
tp1(req'd) = SQRT((6*Me)/(Bp1*(0.75*Fyp)))
tp1 >= tp1(req'd), O.K.
fw =
=
(min)
=
fw = 3.402 kips/in.
fw = maximum of: (0.60*Fyb)*tw/2 or R1/(2*(d/2-tf))
Bolt Bearing
= 0.2291 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
Fu =
(min) = 0.2500 in.
Rpe =
Rps =
Rp =
Fu = 58.00 ksi
Shear Stres
Rpe = 65.25 kips
Rpe = 2*(0.5*Fu*(ED1)*tp1) (based on bolt edge distance)
fv =
Rps = 274.05 kips
Rps = 2*(1.2*Fu*tp1*db1*(Nb1/2-1)) (based on bolt spacing)
Fv =
Rp = 339.30 kips
Rp = Minimum of: Rpe+Rps or 1.2*Fu*tp1*db1*Nb1
Column Web
Rp >= R1, O.K.
Column We
M1 =
fv =
6.91
fv = Ff/(2*Bp1*tp1)
M2 =
ksi
F =
Fv = 14.40 ksi
Fv = 0.40*Fyc
Fv >= fv, O.K.
Left Side Bolt Design:
M1t = 120.00 ft-k
Ff = 82.88 kips
Ab = 0.6013 in.^2
V = 15.00 kips
fv =
6.24
ksi
ft = 34.46 ksi
Fv = 21.00 ksi
Ft = 42.02 ksi
B = 25.30 kips/bolt
V(cap) = 81.81 kips
(continued)
10 of 26
03/02/2015 16:50:17
Version 1.1
Column We
Right Side Bolt Design:
M2t = 120.00 ft-k
Ff = 92.93 kips
Ab = 0.6013 in.^2
V = 15.00 kips
fv =
6.24
ksi
ft = 38.64 ksi
Fv = 21.00 ksi
Ft = 42.02 ksi
B = 25.30 kips/bolt
V(cap) = 74.57 kips
Right Side End Plate Design:
Lw = 14.705 in.
fw = 6.320 kips/in.
= 0.4256 in. (size)
(min) = 0.2500 in.
Bp2(max) = 8.000 in.
D=
7
Pf = 1.3750 in.
Pe = 0.847 in.
Ca =
1.13
Cb = 0.935
Af/Aw = 0.773
m = 0.962
Me = 18.93 in.-kips
tp2(req'd) = 0.725 in.
td(min) =
Web Double
M2t = M2L+M2G
Ff = (M2t*12)/(d-tf)+P2/2
Vd =
Lw =
fw =
Ab = *db2^2/4
=
V = (R2/Nb2)*(4 bolts) (portion of shear force taken by 4 tension (min)
bolts) =
(max) =
h/twc =
Vb = Fv*Ab
h/twc(max) =
h/td =
h/td(max) =
T(cap) >= Ff, O.K.
V(cap) = Vb*(Nb2-4)+SQRT(((44*Ab*4)^2-Ff^2)/4.39) (for N, X Fyc(use)
bolts) =
V(cap) >= R2, O.K.
Pbf1 =
Pwy =
Lw = 2*(bf+tf)-tw
fw = Ff/Lw
Pbf1 =
= fw/((SQRT(2)/2)*(0.30*70))
Pwb =
Pbf1 =
Pf =
Bp1(max) = bf+1"
bp =
Pec =
Ca =
Pe = Pf-(db1/4)-0.7071*D/16
Cb =
Afc/Awc =
m =
Cb = SQRT(bf/Bp1(max))
Me =
m = Ca*Cb*(Af/Aw)^(1/3)*(Pe/db1)^(1/4)
tfc(req'd) =
Me = m*Ff*Pe/4
Pfb =
tp1(req'd) = SQRT((6*Me)/(Bp1*(0.75*Fyp)))
tp2 >= tp2(req'd),
Stiff. Req'd?
O.K.
Web Double
Left Side Colu
Local Web Y
Compressiv
Local Flange
Right Side Co
fw = 3.294 kips/in.
= 0.2218 in. (size)
(min) = 0.2500 in.
Fyc(use) =
= fw/((SQRT(2)/2)*(0.30*70))
Local Web Y
Pbf2 =
Pwy =
Compressiv
Fu = 58.00 ksi
Rpe = 65.25 kips
Rps = 274.05 kips
Rp = 339.30 kips
Pbf2 =
Pwb =

Local Flange
Pbf2 =
Pf =
Rp >= R2, O.K.
bp =
Pec =
fv =
7.74
fv = Ff/(2*Bp2*tp2)
Ca =
ksi
Fv = 14.40 ksi
Fv = 0.40*Fyc
Fv >= fv, O.K.
Cb =
Afc/Awc =
m =
(continued)
11 of 26
03/02/2015 16:50:17
Version 1.1

M1 = 120.00 ft-k
M1 = M1L+M1G
M2 = 120.00 ft-k
M2 = M2L-M2G
F = 179.42 kips
F = (M1*12/(0.95*d))+(M2*12/(0.95*d))
tw(req'd) = 0.890 in.
tfc(req'd) =
Pfb =
Stiff. Req'd?
Column Stiffe
Required Ar
Ps1 =
twc < tw(req'd)
Ps2 =
Ps(max) =
As(req'd) =
td(min) = 0.450 in.
td < td(min), Fail
bs(min) =
Vd = 82.55 kips
bs(use) =
Lw = 16.00 in.
fw =
5.16
fw = Vd/Lw
tp(max) =
kips/in.
= 0.3475 in. (size*)
= fw/((SQRT(2)/2)*(0.30*70))
ts(min) =
(min) = 0.1875 in.
(max) = 0.3637 in.
(max) =
0.40*Fyd*td/((SQRT(2)/2)*0.30*70)
Ls(min) =
Weld size <= weld max., O.K.
Ls(use) =
h/twc = 28.59
As(prov) =
h/twc(max) = 63.33
h/td = 33.55
b/t =
h/td(max) = 63.33
h/td <= h/td(max), O.K. b/t(max) =
Stiffener Wid
Bp(max) =
Stiffener Thi
Stiffener Len
Provided Are
Check Stiffe
Stiffener We
Ps(max) =
Left Side Column Stiffener Requirements:
Lw =
Local Web Yielding:
Stiffeners not req'd. at both flanges if: Pbf1 <= Pwy
fw =
=
Pbf1 = 138.13 kips
Pbf1 = (5/3)*Ff
(min) =
Pwy = 170.44 kips
Pwy = Fyc*twc*(tf+6*k+2*tp+2*(D/16))
Pbf1 <= Pwy, O.K.
Pbf1 = 138.13 kips
Pwb = 184.14 kips
Pbf1 = 138.13
Pf = 1.3750
bp = 8.188
Pec = 1.094
Ca =
1.13
Cb =
1.00
Afc/Awc =
1.00
m = 1.195
Pfb = 56.85
kips
in.
in.
in.
kips
Stiffener We
Ps(max) =
Stiffeners not required at compression flange if: Pbf1 <= Pwb
Lw =
Pbf1 <= Pwb, O.K. fw =
=
(min) =
(max) =
Stiffeners not required at tension flange if: Pbf1 <= Pfb
W18x65
bp1 = 2.5*(Pf+tf+Pf) (effective column flange length)
W18x60
Pec = (g1/2)-k1-(db1/4)
W18x55
W18x50
Cb = 1.0 (assumed)
W18x46
W18x40
m = Ca*Cb*(Af/Aw)^(1/3)*(Pec/db1)^(1/4)
W18x35
Pfb = ((tfc^2*(0.75*Fyc)*bp1)/6)/(m*Pec/4)
Pbf1 > Pfb, Fail
W16x100
W16x89
W16x77
W16x67
W16x57
W16x50
W16x45
W16x40
(continued)
12 of 26
03/02/2015 16:50:17
Version 1.1
W16x31
Right Side Column Stiffener Requirements:

(Assume Fyc = 36 ksi, per AISC Design Guide Series #4)W16x26
Local Web Yielding:
W14x808
Pbf2 = 154.88 kips
Pbf2 = (5/3)*Ff
W14x730
Pwy = 170.12 kips
Pwy = Fyc*twc*(tf+6*k+2*tp2+2*(D/16))
Pbf2 <= Pwy, O.K. W14x665
Pbf2 = 154.88 kips
Pwb = 184.14 kips
Pbf2 = 154.88
Pf = 1.3750
bp = 8.138
Pec = 1.094
Ca =
1.13
Cb =
1.00
Afc/Awc =
1.00
m = 1.195
Pfb = 56.50
kips
in.
in.
in.
kips

Ps1 = 81.29 kips
Ps2 = 98.38 kips
Ps(max) = 98.38 kips
As(req'd) = 2.733 in.^2
Stiffener Width:
Bp(max) =
8.00
bs(min) = 2.447
bs(use) = 7.000
in.
in.
in.
tp(max) = 0.750
ts(min) = 0.442
in.
Stiffener Length:
Ls(min) =
6.29
Ls(use) = 12.58
in.
in.
in.

As(prov) = 7.000 in.^2
b/t = 14.00
b/t(max) = 15.83
W14x605
W14x550
W14x500
Pbf2 <= Pwb, O.K. W14x455
W14x426
W14x398
W14x370
W14x342
bp2 = 2.5*(Pf+tf+Pf) (effective column flange length)
W14x311
Pec = (g2/2)-k2-(db2/4)
W14x283
W14x257
Cb = 1.0 (assumed)
W14x233
W14x211
m = Ca*Cb*(Af/Aw)^(1/3)*(Pec/db2)^(1/4)
W14x193
Pbf2 > Pfb, Fail
W14x176
W14x159
W14x145
W14x132
W14x120
Ps1 = Pbf1-(Minimum of Pwy,Pwb, or Pfb)
W14x109
W14x99
Ps(max) = max. of: Ps1 or Ps2
W14x90
Ast = Ps(max)/Fys
W14x82
W14x74
W14x68
Bp(max) = max. of: Bp1 or Bp2
W14x61
bs(min) = Bp(max)/3-twc/2
W14x53
W14x48
W14x43
W14x38
tp(max) = max. of: tp1 or tp2
W14x34
ts(min) = larger of: tp(max)/2 or bs(use)*SQRT(Fyc)/95
W14x30
W14x22
Ls(min) = dc/2-tfc
W12x336
Ls(use) = dc-2*tfc
W12x305
W12x279
W12x252
W12x230
W12x210
W12x190
b/t = bs(use)/ts
W12x170
b/t <= b/t(max), O.K. W12x152
W12x136
W12x120
W12x106
W12x96
(continued)
13 of 26
03/02/2015 16:50:17
Version 1.1
Column Web Stiffener Design (continued):

Lw = 22.25 in.
fw =
2.65
kips/in.
= 0.1783 in. (size)
(min) = 0.2500 in.
Lw = 43.52 in.
fw =
1.35
kips/in.
= 0.091 in. (size)
(min) = 0.1875 in.
(max) = 0.2133 in.

Lw = (bfc/2-(k1+0.25))*4
fw = Ps(max)/(1.67*Lw)
= fw/((SQRT(2)/2)*(0.30*70))

Lw = (dc-2*(k+0.25))*4
= fw/((SQRT(2)/2)*(0.30*70))
(max) =
0.40*Fyc*twc/((SQRT(2)/2)*0.30*70*2)
Weld size <= weld max., O.K.
Comments:
14 of 26
W12x79
W12x72
W12x65
W12x58
W12x53
W12x50
W12x45
W12x40
W12x35
W12x30
W12x26
W12x22
W12x19
W12x16
W12x14
W10x112
W10x100
W10x88
W10x77
W10x68
W10x60
W10x54
W10x49
W10x45
W10x39
W10x33
W10x30
W10x26
W10x22
W10x19
W10x17
W10x15
W10x12
W8x67
W8x58
W8x48
W8x40
W8x35
W8x31
W8x28
W8x24
W8x21
W8x18
W8x15
W8x13
W8x10
W6x25
W6x20
W6x16
W6x15
W6x12
W6x9
W6x8.5
03/02/2015 16:50:17
Version 1.1
END PLATE MOMENT CONNECTION

Job Name:
Job Number:
Using Unstiffened End Plate Field Bolted to Column Flange

Subject:
Originator:
Checker:
Input Data:
Beam Size =
Column Size =
Beam Yield Stress, Fyb =
Column Yield Stress, Fyc =
Beam End Moment, M =
Moment Includes Wind or Seismic?
Beam End Reaction (Shear), R =
Beam Axial Force, P =
End Plate Length, Lp =
End Plate Width, Bp =
End Plate Thickness, tp =
ASTM Bolt Desig. (A325 only) =
Diameter of Bolts, db =
Total Number of Bolts, Nb =
Dist. to Nearest Tension Bolts, D1 =
Bolt Gage in Column, g =
Edge Distance for End Plate, ED =
Full-Depth or Half-Depth Stiffeners?
###
###
###
###
###
###
W24x94
###
C.L. Column
W14x109
End Plate ("tp" x "Bp" x "Lp") ###
36
###
ksi
36
###
ksi
ED
S2
###
Stiffener
D1
(both
###
S1
sides)
440.00
###
ft-k
S2
No
###
(Beam)
30.00
###
kips
P
3"
M
0.00
###
kips
(Min.)
A325
R
A490(not used)
S2
38.000
N
in.
S1
D1
10.000
X
in.
Stiffener
S2
(both
1.2500
SC
in.
sides)
ED
36
Standard
ksi
A325
Oversized
N
###
Standard
###
"Nb" - "db" Bolts on "g" Gage ###
1.125
in.
16
Nomenclature
###
4.125
###
in.
1.625
###
in.
3.375
Member Properties:
###
in.
5.500
Beam:
###
in.
1.750
d
=
24.300
###
in.
in.
0.625
tw = 0.515 in.
###
in.
36
bf =
9.070 in.
###
ksi
0.6250
tf =
0.875 in.
###
in.
36
k = 1.3800 in.
Yes
ksi
Full-Depth
Column:
No
d = 14.300 in.
Full-Depth
tw = 0.525 in.
Half-Depth
bf = 14.600 in.
Rpe =
tf =
0.860 in.
Rps =
k = 1.4600 in.
Rp =
k1 = 1.5000 in.
Shear Stres
fv =
Fv =
Column Web
Column We
F =
tw(req'd) =
15 of 26
03/02/2015 16:50:17
Version 1.1
(continued)
16 of 26
03/02/2015 16:50:17
Version 1.1
td(min) =
Results:
Web Double
Bolt Design:
Ff = 225.40 kips
Ab = 0.9940 in.^2
V = 15.00 kips
fv =
1.89
ksi
ft = 28.34 ksi
Fv = 21.00 ksi
Ft = 43.82 ksi
B = 43.60 kips/bolt
V(cap) = 294.93 kips
End Plate Design:
Lw = 19.375 in.
fw = 11.634 kips/in.
= 0.7834 in. (size)
(min) = 0.3125 in.
Bp(max) = 10.070 in.
Pf = 1.625 in.
Pb = 3.375 in.
T = 37.57
Ma = 61.05 in.-kips
tpa = 1.165 in.
CF = 1.071
tp(req'd) = 1.247 in.
fw = 5.562 kips/in.
= 0.3746 in. (size)
(min) = 0.3125 in.
Bearing on End Plate:
Fu = 58.00
Rpe = 126.88
Rps = 1370.25
Rp = 1497.13

Ff = (M*12)/(d-tf)+P/2
Vd =
Lw =
fw =
=
(min) =
(max) =
Ab = *db^2/4
V = (R/Nb)*(8 bolts) (portion of end shear taken by 8 tension bolts)h/twc =
h/twc(max) =
h/td =
h/td(max) =
Vb = Fv*Ab
Fyc(use) =
T(cap) >= Ff, O.K.Pbf =
V(cap) = Vb*(Nb-8)+SQRT(((44*Ab*8)^2-Ff^2)/4.39) (for N, X bolts)Pwy =
V(cap) >= R, O.K.
Pbf =
Pwb =
Lw = 2*(bf+tf)-tw
fw = Ff/Lw
Pbf =
= fw/((SQRT(2)/2)*(0.30*70))
Pf =
bp =
Pec =
Ca =
Bp(max) = bf+1"
Cb =
Afc/Awc =
m =
Pe = 3*db
T = Ff/(6 bolts) (assume only 6 of 8 bolts are fully effective)
Me =
Ma = 2*T*(Pf/2) = T*Pf
tfc(req'd) =
tpa = SQRT((6*Ma)/(Bp*(0.75*Fyp)))
Pfb =
CF = SQRT(SQRT(g^2+Pf^2)/5) (CF = Correction Factor)
Stiff. Req'd?
tp(req'd) = tpa*CF
tp >= tp(req'd), O.K.
fw = maximum of: (0.60*Fyb)*tw/2 or R/(2*(d/2-tf))

= fw/((SQRT(2)/2)*(0.30*70))
Web Double
Column Stiffe
Local Web Y
Compressiv
Local Flange
Column Stiffe
Required Ar
Ps =
As(req'd) =
Stiffener Wid
bs(min) =
bs(use) =
Stiffener Thi
ts(min) =
Rpe = 2*(0.5*Fu*(ED)*tp) (based on bolt edge distance)
Stiffener Len
kips
Rps = 2*(1.2*Fu*tp*db*(Nb/2-1)) (based on bolt spacing)
Ls(min) =
kips
Rp = Minimum of: Rpe+Rps or 1.2*Fu*tp*db*Nb
Ls(use) =
kips
Rp >= R, O.K.
Provided Are
As(prov) =
fv =
9.02
fv = Ff/(2*Bp*tp)
Check Stiffe
ksi
Fv = 14.40 ksi
Fv = 0.40*Fyc
Fv >= fv, O.K.
b/t =
b/t(max) =
Stiffener We
ksi
(continued)
17 of 26
03/02/2015 16:50:17
Version 1.1
Lw =
fw =
=
(min) =

F = 228.72 kips
F = M*12/(0.95*d)
tw(req'd) =
1.111
in.
twc < tw(req'd)

Stiffener We
Web doubler plate is req'd. Ps =
Lw =
td(min) = 0.586 in.
fw =
td >= td(min), O.K. =
(min) =
(max) =
Vd = 124.30 kips
Lw = 24.30 in.
W27x307
fw =
5.12
fw = Vd/Lw
W27x281
kips/in.
= 0.3445 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
W27x258
(min) = 0.2500 in.
W27x235
(max) = 0.6061 in.
(max) =
0.40*Fyc*twc/((SQRT(2)/2)*0.30*70)
W27x217
W27x178
h/twc = 23.96
W27x161
h/twc(max) = 63.33
W27x146
h/td = 20.13
W27x129
h/td(max) = 63.33
W27x114
W27x102
Column Stiffener Requirements:

Local Web Yielding:
Pbf = 375.67 kips
Pwy = 229.35 kips

Stiffeners not req'd. at both flanges if: Pbf <= Pwy
Pbf = (5/3)*Ff
Pwy = Fyc*twc*(tf+6*k+2*tp)
Pbf > Pwy, Fail

Pbf = 375.67 kips
Pwb = 312.80 kips
Stiffeners not required at compression flange if: Pbf <= Pwb

Pbf > Pwb, Fail

Pbf = 375.67
Pf = 1.6250
bp = 15.938
Pec = 0.969
Ca =
1.13
Cb =
1.00
Afc/Awc =
1.00
m = 1.089
Pfb = 201.20
kips
in.
in.
in.
kips
Stiffeners not required at tension flange if: Pbf <= Pfb

Pec = (g/2)-k1-(db/4)
Cb = 1.0 (assumed)
m = Ca*Cb*(Af/Aw)^(1/3)*(Pec/db)^(1/4)
Pfb = ((tfc^2*(0.75*Fyc)*bp)/6)/(m*Pec/4)
Pbf > Pfb, Fail
W27x94
W27x84
W24x492
W24x450
W24x408
W24x370
W24x335
W24x306
W24x279
W24x250
W24x229
W24x207
W24x192
W24x176
W24x162
W24x146
W24x131
W24x117
W24x104
W24x103
W24x94
W24x84
W24x76
W24x68
W24x62
W24x55
W21x402
W21x364
W21x333
(continued)
18 of 26
03/02/2015 16:50:17
Version 1.1
W21x275
W21x248
W21x223
W21x201
Ps = 174.46 kips
W21x182
As(req'd) = 4.846 in.^2
Ast = Ps/Fys
W21x166
W21x147
Stiffener Width:
W21x132
bs(min) = 3.071 in.
bs(min) = Bp/3-twc/2
W21x122
bs(use) = 7.000 in.
W21x111
W21x101
W21x93
ts(min) = 0.625 in.
ts(min) = larger of: tp/2 or bs(use)*SQRT(Fyc)/95
W21x83
Stiffener Length:
W21x68
Ls(min) =
6.29
Ls(min) = dc/2-tfc
W21x62
in.
Ls(use) = 12.58 in.
Ls(use) = dc-2*tfc
W21x57
W21x55
W21x50
As(prov) = 8.750 in.^2
W21x48
W21x44
W18x311
b/t =
11.20
b/t = bs(use)/ts
W18x283
b/t(max) = 15.83
b/t <= b/t(max), O.K. W18x258
W18x234
W18x211
Ps = 174.46 kips
W18x192
Lw = 44.40 in.
Lw = (bfc/2-(k1+0.25))*8
W18x175
fw =
2.35
fw = Ps/(1.67*Lw)
W18x158
kips/in.
= 0.158 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
W18x143
(min) = 0.3125 in.
W18x130
W18x119
W18x106
Ps = 174.46 kips
W18x97
Lw = 43.52 in.
Lw = (dc-2*(k+0.25))*4
W18x86
fw =
2.40
fw
=
Ps/(1.67*Lw)
W18x76
kips/in.
= 0.162 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
W18x71
(min) = 0.2500 in.
W18x65
(max) = 0.255 in.
(max) =
0.40*Fyc*twc/((SQRT(2)/2)*0.30*70*2)
W18x60
W18x50
Comments:
W18x46
W18x40
W18x35
W16x100
W16x89
W16x77
W16x67
W16x57
W16x50
W16x45
W16x40
W16x36
19 of 26
03/02/2015 16:50:17
Version 1.1
END PLATE MOMENT CONNECTIONS

Job Name:
Job Number:
Using Unstiffened End Plates Field Bolted to Both Column Flanges

Subject:
Originator:
Checker:
Input Data:
Left Side Beam Size =
Right Side Beam Size =
Column Size =
Yield Stress of Beams, Fyb =
Yield Stress of Column, Fyc =
Left Beam Lateral Moment, M1L =
Left Beam Gravity Moment, M1G =
Left Beam End Reaction, R1 =
Left Beam Axial Force, P1 =
Right Beam Lateral Moment, M2L =
Right Beam Gravity Moment, M2G =
Right Beam End Reaction, R2 =
Right Beam Axial Force, P2 =
Left Side End Plate Length, Lp1 =
Left Side End Plate Width, Bp1 =
Left Side End Plate Thk., tp1 =
Right Side End Plate Length, Lp2 =
Right Side End Plate Width, Bp2 =
Right Side End Plate Thk., tp2 =
ASTM Bolt Desig. (A325 only) =
W24x94
W21x101
W14x311
36
36
ksi
ksi
440.00
0.000
30.00
0.00
440.00
0.000
30.00
0.00
ft-k
38.000
10.000
1.2500
35.000
10.000
1.5000
36
A325
N
Standard
1.125
16
4.125
1.625
3.375
5.500
1.750
1.125
16
4.125
1.625
3.375
5.500
1.750
0.625
36
0.7500
36
in.
ft-k
kips
kips
ft-k
ft-k
kips
kips
in.
in.
in.
in.
in.
ksi
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
in.
ksi
in.
ksi
###
###
###
###
###
###
Gage
###
End Plate
C.L. Column
Stiffener
"tp2"x"Bp2"x"Lp2" ###
(both
sides)
###
###
ED1
ED2
S2
S4
###
D1
D2
S1
S3 ###
###
S2
S4
###
(Left Beam)
(Right Beam)
###
P1
P2
M1
3"
M2 ###
(Min.)
###
R1
R2
S2
S4
A325
A490(not
used)
S1
S3
D1
D2
N
S2
S4
X
ED1
ED2
SC
Standard
End Plate
"tp1"x"Bp1"x"Lp1"
Oversized
Gage
Stiffener
###
(both
sides)
Nomenclature
###
Member Properties:
###
Left Beam:
###
d = 24.300 in.
###
tw = 0.515 in.
###
bf =
9.070 in.
###
tf =
0.875 in.
###
k = 1.3800 in.
###
Right Beam:
###
d = 21.400 in.
###
=
tw = 0.500 in.
(min) =
bf = 12.300 in.
tf =
0.800 in.
Bolt Bearing
k = 1.3000 in.
Fu =
Column:
Rpe =
d = 17.100 in.
Rps =
tw = 1.410 in.
Rp =
bf = 16.200 in.
Shear Stres
tf =
2.260 in.
fv =
k = 2.8600 in.
Fv =
k1 = 1.9375 in.
Right Side Bo
Horizontal F
M2t =
20 of 26
03/02/2015 16:50:17
Version 1.1
(continued)
21 of 26
03/02/2015 16:50:17
Version 1.1
Bolt Tension
Results:
Ab =
V=
Left Side Bolt Design:
fv =
ft =
M1t = 440.00 ft-k
M1t = M1L+M1G
Fv =
Ff = 225.40 kips
Ff = (M1t*12)/(d-tf)+P1/2
Fv =
Vb =
Ft =
Ab = *db1^2/4
Ab = 0.9940 in.^2
Ft =
V = 15.00 kips
V = (R1/Nb1)*(8 bolts) (portion of end shear taken by 8 tension bolts) B =
fv =
1.89
B=
ksi
ft = 28.34 ksi
T(cap) =
Fv = 21.00 ksi
T(cap) =
Vb = Fv*Ab
V(cap) =
Ft = 43.82 ksi
V(cap) =
B = 43.60 kips/bolt
T(cap) >= Ff, O.K.
V(cap) = Vb*(Nb1-8)+SQRT(((44*Ab*8)^2-Ff^2)/4.39) (for N, X bolts)Lw =
V(cap) >= R1, O.K.fw =
=
Left Side End Plate Design:
(min)
=
Lw = 19.375 in.
Lw = 2*(bf+tf)-tw
fw = 11.634 kips/in.
fw = Ff/Lw
Bp2(max) =
= 0.7834 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
Pf =
(min) = 0.3125 in.
Pb =
T=
Ma =
Bp1(max) = 10.070 in.
Bp1(max) = bf+1"
tpa =
Pf = 1.625 in.
CF =
Pb = 3.375 in.
Pe = 3*db1
T = 37.57
Ma = 61.05 in.-kips
Ma = 2*T*(Pf/2) = T*Pf
fw =
=
tpa = 1.165 in.
tpa = SQRT((6*Ma)/(Bp1*(0.75*Fyp)))
(min) =
CF = 1.071
CF = SQRT(SQRT(g1^2+Pf^2)/5) (CF = Correction Factor)
tp1(req'd) = 1.247 in.
tp1(req'd) = tpa*CF
tp1 >= tp1(req'd), O.K.
Fu =
Rpe =
fw = 5.562 kips/in.
Rps =
= 0.3746 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
Rp =
(min) = 0.3125 in.
fv =
Fv =
Fu = 58.00 ksi
Rpe = 126.88 kips
Rps = 1370.25 kips
M1 =
Rp = 1497.13 kips
M2 =
F =
Rp >= R1, O.K.
tw(req'd) =
fv =
9.02
fv = Ff/(2*Bp1*tp1)
ksi
Fv = 14.40 ksi
Fv = 0.40*Fyc
Fv >= fv, O.K. td(min) =
Right Side En
Top Flange t
End Plate R
tp2(req'd) =
Beam Web
Bolt Bearing
Shear Stres
Column Web
Column We
Column We
Web Double
(continued)
22 of 26
03/02/2015 16:50:17
Version 1.1
Right Side Bolt Design:

M2t = 440.00 ft-k
Ff = 256.31 kips
Ab = 0.9940 in.^2
V = 15.00 kips
fv =
1.89
ksi
ft = 32.23 ksi
Fv = 21.00 ksi
Ft = 43.82 ksi
B = 43.60 kips/bolt
M2t = M2L+M2G
Ff = (M2t*12)/(d-tf)+P2/2
Lw =
fw =
=
(min) =
(max) =
Web Double
Ab = *db2^2/4
h/twc =
V = (R2/Nb2)*(8 bolts) (portion of shear force taken by 8 tension
h/twc(max)
bolts) =
h/td =
h/td(max) =
Left Side Colu
Vb = Fv*Ab
Fyc(use) =
Local Web Y
Pbf1 =
T(cap) >= Ff, O.K.
Pwy =
V(cap) = Vb*(Nb2-8)+SQRT(((44*Ab*8)^2-Ff^2)/4.39) (for N, X bolts)
Compressiv
V(cap) >= R2, O.K.
Pbf1 =
Right Side End Plate Design:
Pwb =
Local Flange
Lw = 25.700 in.
Lw = 2*(bf+tf)-tw
Pbf1 =
fw = 9.973 kips/in.
fw = Ff/Lw
Pf =
= 0.6716 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
bp =
(min) = 0.3125 in.
Pec =
Ca =
Cb =
Bp2(max) = 13.300 in.
Bp2(max) = bf+1"
Afc/Awc =
m =
Pf = 1.700 in.
Pb = 3.375 in.
Pe = 3*db2
Me =
T = 42.72
tfc(req'd) =
Ma = 72.62 in.-kips
Ma = 2*T*(Pf/2) = T*Pf
Pfb =
tpa = 1.270 in.
tpa = SQRT((6*Ma)/(Bp2*(0.75*Fyp)))
Stiff. Req'd?
CF = 1.073
CF = SQRT(SQRT(g2^2+Pf^2)/5) (CF = Correction Factor)
Right Side Co
tp2(req'd) = 1.363 in.
tp2(req'd) = tpa*CF
tp2 >= tp2(req'd),
Fyc(use)
O.K. =
Local Web Y
Pbf2 =
fw = 5.400 kips/in.
Pwy =
= 0.3637 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
Compressiv
(min) = 0.3125 in.
Pbf2 =
Pwb =
Local Flange
Fu = 58.00 ksi
Pbf2 =
Rpe = 152.25 kips
Pf =
Rps = 1644.30 kips
bp =
Rp = 1796.55 kips
Pec =
Rp >= R2, O.K.
Ca =
Cb =
fv =
8.54
fv = Ff/(2*Bp2*tp2)
Afc/Awc =
ksi
m =
Fv = 14.40 ksi
Fv = 0.40*Fyc
Fv >= fv, O.K.
Me =
tfc(req'd) =
Pfb =
Stiff. Req'd?
(continued)
23 of 26
03/02/2015 16:50:17
Version 1.1
Required Ar
Ps1 =
Ps2 =
M1 = 440.00 ft-k
M1 = M1L+M1G
Ps(max) =
M2 = 440.00 ft-k
M2 = M2L-M2G
As(req'd) =
F = 488.43 kips
F = (M1*12/(0.95*d))+(M2*12/(0.95*d))
Stiffener Wid
tw(req'd) = 1.984 in.
twc < tw(req'd)
Bp(max) =
Web doubler plate is req'd.
bs(min) =
bs(use) =
td(min) = 0.574 in.
Stiffener Thi
td >= td(min), O.K.
tp(max) =
ts(min) =
Vd = 150.01 kips
Stiffener Len
Lw = 21.40 in.
Ls(min) =
fw =
7.01
fw = Vd/Lw
Ls(use) =
kips/in.
= 0.4721 in. (size)
= fw/((SQRT(2)/2)*(0.30*70))
Provided Are
(min) = 0.3125 in.
(min) = Min. fillet weld size from AISC Table J2.4, page 5-67 As(prov) =
(max) = 0.6061 in.
(max) =
0.40*Fyd*td/((SQRT(2)/2)*0.30*70)
Check Stiffe
Weld size <= weld max., O.K. b/t =
b/t(max) =
h/twc =
8.92
Stiffener We
h/twc(max) = 63.33
h/twc <= h/twc(max), O.K.Ps(max) =
h/td = 20.13
Lw =
h/td(max) = 63.33
fw =
=
(min) =
Left Side Column Stiffener Requirements:
Stiffener We
Local Web Yielding:
Ps(max) =
Pbf1 = 375.67 kips
Pbf1 = (5/3)*Ff
Lw =
Pwy = 1042.36 kips
Pwy = Fyc*twc*(tf+6*k+2*tp1)
Pbf1 <= Pwy, O.K. fw =
=
(min) =
(max) =
Pbf1 = 375.67 kips
Pwb = 6059.69 kips
Pbf1 <= Pwb, O.K. W18x97
Pbf1 = 375.67
Pf = 1.6250
bp = 15.938
Pec = 0.531
Ca =
1.13
Cb =
1.00
Afc/Awc =
1.00
m = 0.937
Pfb = 2944.39
kips
in.
in.
in.
kips

Pec = (g1/2)-k1-(db1/4)
Cb = 1.0 (assumed)
m = Ca*Cb*(Af/Aw)^(1/3)*(Pec/db1)^(1/4)
Pbf1 <= Pfb, O.K.
Conclusion: Stiffeners are not required
W18x86
W18x76
W18x71
W18x65
W18x60
W18x55
W18x50
W18x46
W18x40
W18x35
W16x100
W16x89
W16x77
W16x67
W16x57
W16x50
W16x45
W16x40
(continued)
24 of 26
03/02/2015 16:50:17
Version 1.1
W16x31
Right Side Column Stiffener Requirements:

(Assume Fyc = 36 ksi, per AISC Design Guide Series #4)W16x26
Local Web Yielding:
W14x808
Pbf2 = 427.18 kips
Pbf2 = (5/3)*Ff
W14x730
Pwy = 1063.93 kips
Pwy = Fyc*twc*(tf+6*k+2*tp2)
Pbf2 <= Pwy, O.K. W14x665
Pbf2 = 427.18 kips
Pwb = 6059.69 kips
Pbf2 = 427.18
Pf = 1.7000
bp = 16.013
Pec = 0.531
Ca =
1.13
Cb =
1.00
Afc/Awc =
1.00
m = 0.937
Pfb = 2958.25
kips
in.
in.
in.
kips

Ps1 =
N.A.
kips
Ps2 =
N.A.
kips
Ps(max) =
N.A.
kips
As(req'd) =
N.A.
in.^2
Stiffener Width:
Bp(max) =
N.A.
bs(min) =
N.A.
bs(use) =
N.A.
in.
in.
tp(max) =
N.A.
ts(min) =
N.A.
in.
Stiffener Length:
Ls(min) =
N.A.
Ls(use) =
N.A.
in.
in.
in.

Pbf2 <= Pwb, O.K.

Pec = (g2/2)-k1-(db2/4)
Cb = 1.0 (assumed)
m = Ca*Cb*(Af/Aw)^(1/3)*(Pec/db2)^(1/4)
Pbf2 <= Pfb, O.K.
Conclusion: Stiffeners are not required

Ast = Ps(max)/Fys
Bp(max) = max. of: Bp1 or Bp2

bs(min) = Bp(max)/3-twc/2
tp(max) = max. of: tp1 or tp2

ts(min) = larger of: tp(max)/2 or bs(use)*SQRT(Fyc)/95
Ls(min) = dc/2-tfc
Ls(use) = dc-2*tfc

As(prov) =
N.A.
in.^2

b/t =
N.A.
b/t(max) =
N.A.
b/t = bs(use)/ts
W14x605
W14x550
W14x500
W14x455
W14x426
W14x398
W14x370
W14x342
W14x311
W14x283
W14x257
W14x233
W14x211
W14x193
W14x176
W14x159
W14x145
W14x132
W14x120
W14x109
W14x99
W14x90
W14x82
W14x74
W14x68
W14x61
W14x53
W14x48
W14x43
W14x38
W14x34
W14x30
W14x26
W14x22
W12x336
W12x305
W12x279
W12x252
W12x230
W12x210
W12x190
W12x170
W12x152
W12x136
W12x120
W12x106
W12x96
(continued)
25 of 26
03/02/2015 16:50:17
Version 1.1
Column Web Stiffener Design (continued):

Ps(max) =
N.A.
kips
Lw =
N.A.
Lw = (bfc/2-(k1+0.25))*4
in.
fw =
N.A.
kips/in.
=
= fw/((SQRT(2)/2)*(0.30*70))
N.A.
in. (size)
(min) =
N.A.
in.
Ps(max) =
N.A.
kips
Lw =
N.A.
in.
fw =
N.A.
kips/in.
=
N.A.
in. (size)
(min) =
N.A.
in.
(max) =
N.A.
in.

Lw = (dc-2*(k+0.25))*4
= fw/((SQRT(2)/2)*(0.30*70))
(max) =
0.40*Fys*ts/((SQRT(2)/2)*0.30*70*2)
Comments:
26 of 26
W12x79
W12x72
W12x65
W12x58
W12x53
W12x50
W12x45
W12x40
W12x35
W12x30
W12x26
W12x22
W12x19
W12x16
W12x14
W10x112
W10x100
W10x88
W10x77
W10x68
W10x60
W10x54
W10x49
W10x45
W10x39
W10x33
W10x30
W10x26
W10x22
W10x19
W10x17
W10x15
W10x12
W8x67
W8x58
W8x48
W8x40
W8x35
W8x31
W8x28
W8x24
W8x21
W8x18
W8x15
W8x13
W8x10
W6x25
W6x20
W6x16
W6x15
W6x12
W6x9
W6x8.5
03/02/2015 16:50:17

Endplmc9 - End Plate Moment Connections

Uploaded by

Copyright:

Available Formats

Endplmc9 - End Plate Moment Connections

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Endplmc9 - End Plate Moment Connections

Uploaded by

Copyright:

Available Formats

"ENDPLMC9" --- END PLATE MOMENT CONNECTIONS

This documentation sheet

Program Assumptions and Limitations:

END PLATE MOMENT CONNECTION

Using Unstiffened End Plate Field Bolted to Column Flange

Column Web Doubler Plate:

(Assume Fyc = 36 ksi, per AISC Design Guide Series #4)

Compressive Buckling of Web:

Stiffeners not required at compression flange if: Pbf <= Pwb

Local Flange Bending:

Stiffeners not required at tension flange if: Pbf <= Pfb

Column Web Stiffener Design:

END PLATE MOMENT CONNECTIONS

Using Unstiffened End Plates Field Bolted to Both Column Flanges

Connection Data and Parameters:

Left Side Colu

Fu = 58 for Fyp = 36, Fu = 65 for Fyp = 50

Column Web Doubler Plate Requirement:

Right Side Column Stiffener Requirements:

Column Web Stiffener Design:

Provided Area of Pair of Stiffeners:

Column Web Stiffener Design (continued):

Ps(max) = max. of: Ps1 or Ps2

Ps(max) = max. of: Ps1 or Ps2

END PLATE MOMENT CONNECTION

Using Unstiffened End Plate Field Bolted to Column Flange

Assume 1/2 of beam axial force is also taken at each flange

fw = maximum of: (0.60*Fyb)*tw/2 or R/(2*(d/2-tf))

Column Web Doubler Plate Requirement:

twc < tw(req'd)

Column Stiffener Requirements:

(Assume Fyc = 36 ksi, per AISC Design Guide Series #4)

Compressive Buckling of Web:

Stiffeners not required at compression flange if: Pbf <= Pwb

Local Flange Bending:

Stiffeners not required at tension flange if: Pbf <= Pfb

Column Web Stiffener Design:

END PLATE MOMENT CONNECTIONS

Using Unstiffened End Plates Field Bolted to Both Column Flanges

Right Side Bolt Design:

Stiffeners not required at tension flange if: Pbf1 <= Pfb

Right Side Column Stiffener Requirements:

Column Web Stiffener Design:

Stiffeners not required at compression flange if: Pbf2 <= Pwb

Stiffeners not required at tension flange if: Pbf2 <= Pfb

Ps1 = Pbf1-(Minimum of Pwy,Pwb, or Pfb)

Bp(max) = max. of: Bp1 or Bp2

tp(max) = max. of: tp1 or tp2

Provided Area of Pair of Stiffeners:

Check Stiffener Slenderness:

Column Web Stiffener Design (continued):

Ps(max) = max. of: Ps1 or Ps2

You might also like

fw = maximum of: (0.60Fyb)tw/2 or R/(2*(d/2-tf))