Your Quick Guide To Process Safety Management

YOUR QUICK
GUIDE TO
PROCESS SAFETY
MANAGEMENT
Introduction
Major incidents are a constant threat to plants and
teams involved in hazardous materials; whether
its for extracting hydrocarbons, processing ore
variations or managing pipelines.
Companies need to constantly strive for ever-lower
injury rates as an objective. By ensuring their
process safety strategies continuously evolve, that
objective becomes far more achievable.
However, at the same time, its also important
not to have process safety undermine sustainable
business performance. A truly effective strategy
will overcome this potential issue and improve
reliability, support productivity, and reduce
operational expenditure.
www.process-safety.com.au
PREVENTION THROUGH DESIGN (PTD)

PtD needs to take a higher priority in todays risk mitigation approaches.
When plant teams conduct any risk mitigation initiative, theres an inherent
need to ensure no other risk potential is introduced. There are three
challenges which have to be acknowledged:
Through the normal chronology of a design, the best opportunity for

decision making is when the least amount of data is available;
People dont want to risk untried solutions this is a psychological

barrier which can hamper project development;
And the situations related to using an EPCM contractor. From an

operators perspective, if they go with a unique solution, its a good
chance that competitive EPCM bidding will be reduced or excluded.
The early planning in concept development of a project is very financially

and production-driven. To maximise preventability in the conceptual stage,
safety has to be infused within a team that is working to commercial and
production objectives. If you can emphasise serious safety considerations
throughout the process design lifecycle, youll promote early process changes
which bring large safety benefits and quite often great commercial
advantages too.
It is during design
that you have the
maximum chance
to deal yourself the
strongest safety hand,
because it is the very
starting point of your
new plant, and once
completed, it is seldom
practicable to go back.
Tony Pooley
Associate Professor,
University of South Australia,
& Former NOPSEMA Advisor
KPIS AND STANDARDISED PROCESSES

At the outset of a major project, the aims of the EPCM contractor are not the
same as for the client. There is constant tension (albeit below the surface)
between two different objectives. The contractor usually wants to build a
facility that meets the client handover conditions at the minimum cost.
As a result, the operability and maintainability of that facility (after the
successful handover) is of fast-reducing interest to the contractor. All concern
evaporates long before the design life of the facility has been reached.
The client cannot complain about this. Theyd most likely have given
greater weighting to price than any other review criteria (once sound safety
management during the construction phase was reasonably assured).
Both client and contractors have to find a middle ground for genuine success
and KPIs need to reflect long term operability and maintainability. However,
don't wait for change. None of the individuals responsible will be in the same
role when the plant learns by experience that it can't cope with changes in
operating conditions (which always develop over time).
There should be a clear understanding of the critical controls for incidents
what the key equipment is, and the key control loops and alarm systems
which might be in place. Operators and supervisors need to know what
happens to for example pressure, temperature, flow, velocity and specific
gravity as gas goes across a control valve.
Its about looking

at the key metrics to
make sure were not
hurting people, plant
or environment.
Paul Cholakos
GM PNG Operations, Oil Search
LEARNING FROM INCIDENTS

Be it in the oil and gas industry, mining, petrochemical or chemical process
industries, major and minor incidents have occurred. These incidents often hold
insights which can guide the strategic direction for process safety management.
Production
plant
Plant design/
modification
Design/
safety tools
Incident
cases
Learning from incident

based experience
feedback cycle
Incident
databases
Dissemination
Data
mining
Knowledge
& Learning
generation
Focus should be placed on improving experience feedback systems and

fully utilising the existing incident knowledge base. Sharing the experience
and knowledge with the process community from design, technical and
operational areas will lead to a more holistic loss prevention effort.
The dissemination has to be proactive and continuous only then will it
overcome the corporate precedent which overshadows inherently safer
design (ISD). Uptake of ISD into the design process can be improved through
a practical approach and further quantification.
Reviewing past
incidents is one
thing; learning from
them and building
practical solutions is
where you can make
a real difference for
process safety.
Nigel Cann, Associate Principal

Risk & Security, Arup
RISK-BASED APPROACHES
The quantitative versus qualitative challenge in effective risk management
highlights a significant consideration for process safety.
Oil and gas companies have traditionally applied a quantified risk
assessment (QRA) through the development of fault and event trees.
However, a prominent limiting factor of this practice relates to data
collection and its usage.
If a consultant or operator uses the data which is collected from around
the world and averaged, theyll get a number representative of that global
average; but not representative of any one organisation or facility.
As a result, when you undertake a QRA, there is a chance that the site youre
dealing with might be much better or much worse than the worldwide
average. Some industries such as mining have used experience-based
quantification (EBQ), which is designed for hazardous facilities involving
substantial human interface and little or no statistics on failure rates.
The fault tree, because of its essential use as a mathematical model, can
usually only show the causes of an incident; whereas an EBQ model can
show both causes and their related controls by using a bowtie diagram. It is
not easy balancing the benefits of mathematical and statistical purity with
the benefits of plant-specific experience.
CONCLUSION
Safety has historically been treated as a separate focus from business
performance, but now there are more tools available than ever before to
change this.
Companies have an opportunity to weave together all the different technical
and cognitive elements to not only mitigate risk; but align PSM with business
objectives and make a real difference to the bottom line.
DOWNLOAD THE BR
OC
HURE
LEARN MORE! Join us at the conference:
Main Conference: 25 26 November 2014

Venue: Royal on the Park, Brisbane, QLD
Hear and learn more from 16 experts, including:

Process Safety in practice: There has been a major disaster in an under developed
company developing an action plan
Situation: A global company has sold a plant to a minor local player. There has been a
major disaster. This interactive session based on role play will explore the decisions
made in such a situation. It will shed critical insight on the factors that are taken into
consideration and other influencers.
Tony Pooley, Associate Professor, University of South Australia, former Advisor, NOPSEMA
Measuring and improving the business impact of process safety management
Exploring the business impact of process safety management
Ensuring that the PSM strategy is aligned with the business strategy
Embedding process safety across all plant processes
Measuring the ROI of process safety management in your plant
Paul Cholakos, General Manager, PNG Operations, Oil Search
Integrating process safety and maintenance
How is machine safety linked to process safety?
Evaluating maintenance systems and understanding the inherent risks
Maintenance controls and process safety
Nigel Cann, Associate Principal Risk & Security, Arup
For more information about the summit call us on 02 9229 1000

or email enquire@iqpc.com.au

Your Quick Guide To Process Safety Management

Uploaded by

Copyright:

Available Formats

Your Quick Guide To Process Safety Management

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Your Quick Guide To Process Safety Management

Uploaded by

Copyright:

Available Formats

YOUR QUICK

PREVENTION THROUGH DESIGN (PTD)

Through the normal chronology of a design, the best opportunity for

People dont want to risk untried solutions this is a psychological

And the situations related to using an EPCM contractor. From an

The early planning in concept development of a project is very financially

KPIS AND STANDARDISED PROCESSES

Its about looking

LEARNING FROM INCIDENTS

Learning from incident

Focus should be placed on improving experience feedback systems and

Nigel Cann, Associate Principal

LEARN MORE! Join us at the conference:

Main Conference: 25 26 November 2014

Hear and learn more from 16 experts, including:

For more information about the summit call us on 02 9229 1000

You might also like