Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 143 views

    Gas Detector Manual

    Uploaded by

    Lwin Phyo
    The RKI "S" series gas sensor/transmitters are explosion proof 4-20mA transmitters that detect common gas hazards. They are available to detect lower explosive limit, oxygen, hydrogen sulfide, carbon monoxide, carbon dioxide, and hydrocarbons between 0-2000 ppm. The transmitters have an explosion proof housing, long life sensors typically lasting 2+ years, and can be calibrated in the field using a voltmeter, screwdriver, and calibration gas. They operate from 24VDC and provide a 4-20mA output signal to connect to various controllers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Gas Detector Manual

    Uploaded by

    Lwin Phyo
    143 views2 pages
    The RKI "S" series gas sensor/transmitters are explosion proof 4-20mA transmitters that detect common gas hazards. They are available to detect lower explosive limit, oxygen, hydrogen sulfide, carbon monoxide, carbon dioxide, and hydrocarbons between 0-2000 ppm. The transmitters have an explosion proof housing, long life sensors typically lasting 2+ years, and can be calibrated in the field using a voltmeter, screwdriver, and calibration gas. They operate from 24VDC and provide a 4-20mA output signal to connect to various controllers.

    Original Description:

    Gas Detector Manual

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The RKI "S" series gas sensor/transmitters are explosion proof 4-20mA transmitters that detect common gas hazards. They are available to detect lower explosive limit, oxygen, hydrogen sulfide, carbon monoxide, carbon dioxide, and hydrocarbons between 0-2000 ppm. The transmitters have an explosion proof housing, long life sensors typically lasting 2+ years, and can be calibrated in the field using a voltmeter, screwdriver, and calibration gas. They operate from 24VDC and provide a 4-20mA output signal to connect to various controllers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    143 views2 pages

    Gas Detector Manual

    Uploaded by

    Lwin Phyo
    The RKI "S" series gas sensor/transmitters are explosion proof 4-20mA transmitters that detect common gas hazards. They are available to detect lower explosive limit, oxygen, hydrogen sulfide, carbon monoxide, carbon dioxide, and hydrocarbons between 0-2000 ppm. The transmitters have an explosion proof housing, long life sensors typically lasting 2+ years, and can be calibrated in the field using a voltmeter, screwdriver, and calibration gas. They operate from 24VDC and provide a 4-20mA output signal to connect to various controllers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    F015-0605

    EXPLOSION PROOF GAS SENSOR/TRANSMITTER


    S Series

    Gas Detection For Life

    Features

    Explosion proof housing


    Patented water repellent sensor coating
    Operates independent of a controller
    Available for LEL, H2S, CO, O2, and ppm HC
    IR sensors available for LEL & CO2
    Long life sensors (2 + years typical)
    Competitively priced
    Intrinsically safe, U.L. Classified CSA

    Applications

    Petrochemical Plants
    Refineries
    Gas Plants
    Offshore Drilling Platforms
    Water & wastewater treatment plants
    Pulp & paper mills
    Gas, telephone, & electric utilities
    Parking garages
    Manufacturing facilities
    Steel
    Automotive
    Chemical storage buildings

    The RKI S series gas sensor/transmitters are highly reliable and cost effective basic 4-20 mA transmitters for
    detection of common gas hazards. The S series transmitters are available for LEL, O2, H2S, CO, CO2 or for
    0 - 2,000 ppm Hydrocarbon detection (for various fuels or solvents). The electronics are encased inside a potted
    package to avoid damage from mechanical abuse or corrosion, and the amplifier is installed inside an explosionproof enclosure. All sensors are explosion-proof with flame arrestors and approved for use in hazardous atmospheres. There is also an optional version for oxygen for use in non-hazardous atmospheres.
    The only tools required to calibrate the S series are a voltmeter, screwdriver, and cal gas. The zero and calibration functions are performed by adjusting potentiometers on the amplifiers. The amplifier has test jacks for
    connecting to a voltmeter for calibration purposes, and the sensor response is viewed on the voltmeter as a
    100mV to 500mV signal. Field calibration can be performed easily and quickly by one person.
    The S series transmitters can be used either indoors or outdoors. The flame arrestors utilize a patented coating which make them water repellent, and splash guards are also available for use in very wet environments.
    The transmitter operates from 24 VDC (10.5VDC to 30 VDC), and provides a 4-20mA signal which can be connected to a wide variety of controllers.

    RKI Instruments, Inc. 33248 Central Ave. Union City, CA 94587 Phone (800) 754-5165 (510) 441-5656 Fax (510) 441-5650

    World Leader In Gas Detection & Sensor Technology


    www.rkiinstruments.com

    S Series
    Part #
    Measuring
    Range
    Max Current
    Draw

    O2

    H2S

    65-2400RK
    65-2400RK-05

    65-2513RK
    65-2516RK

    65-2422RK-05

    65-2432RK-05

    65-2391RK-03

    0-100% LEL

    0-25% Vol.

    0-100 ppm

    0-300 ppm

    0-5% Vol.

    200 mA (power
    wires) 25 mA
    (signal wires) 3
    or 4 wires

    CO

    CO2

    65-2390RK-CH4

    HC
    65-2390RK-HC

    0-100% LEL
    60 mA
    (power wires)
    25 mA (signal wires) 3 wires

    25 mA
    (2 wire system)

    Outputs
    Response
    Time

    Infrared
    CH4

    LEL

    HC
    65-2460RK
    65-2460RK-05
    0-2,000 ppm
    100 mA
    (power wires)
    25 mA (signal wires)
    3 wires

    4 - 20 mA signal
    30 seconds to
    90% of concentration

    20 seconds to
    90% of concentration

    45 seconds to
    90% of concentration

    30 seconds to 90% of concentration

    Operating Environment

    Location

    Temperature

    Indoor or
    outdoor.
    Explosion proof
    for Class I, Div.
    1, Groups B,
    C, and D.

    Indoor or outdoor. Explosion


    proof housing
    (65-2516RK)
    and intrinsically
    safe sensor
    (65-2513RK)

    -40 to 185 F

    Indoor or outdoor. Explosion proof for Class I, Div. 1,


    Groups B, C, and D.

    -4 to 113 F

    Humidity

    -4 to 122 F

    5 - 95% RH, non


    condensing

    0 - 99% RH, non condensing

    Housing

    30 to 120 F

    Aluminum explosion proof enclosure

    Sensors
    Catalytic
    Combustion

    Galvanic Cell

    1 to 2 years
    with normal
    intermmittent
    exposure to
    flammable gas

    2 years normal
    service

    2 years normal
    service when
    intermittently
    exposed to H2S

    2 to 3 years normal
    service

    Zero

    Sets transmitter output to 4


    mA with 0%
    LEL output
    from combustible sensor

    Sets transmitter
    output to 4 mA
    with an inert
    gas (zero) output from O2
    sensor

    Sets transmitter
    output to 4 mA
    with zero output
    from H2S sensor

    Sets transmitter
    output to 4 mA
    with zero output
    from CO sensor

    Sets transmitter output to 4


    mA with zero
    output from
    CO2 sensor

    Sets transmitter output to 4 mA


    with 0% LEL output from
    combustible sensor

    Sets transmitter output to


    4 mA with zero ppm
    output from sensor

    Span

    Sets transmitter output to 20


    mA with 100%
    LEL output
    from combustible sensor

    Sets transmitter
    output to 17.44
    mA with 20.9%
    Vol. O2 (fresh
    air) output from
    O2 sensor

    Sets transmitter
    output to 20 mA
    with 100 ppm
    output from H2S
    sensor

    Sets transmitter
    output to 20 mA
    with 300 ppm
    output from CO
    sensor

    Sets transmitter output to


    20 mA with
    5% volume
    output from
    CO2 sensor

    Sets transmitter output to 20 mA


    with 100% LEL output from
    combustible sensor

    Sets transmitter output to 20 mA with


    2,000 ppm Hexane
    (typical) output from
    sensor

    Type
    Life
    Expectancy

    Infrared

    Metal Oxide
    Semiconductor

    5 + years normal
    service

    5 to 10 years typical

    Electrochemical

    Controls

    Operating
    Voltage
    Approvals

    11 VDC to 30 VDC
    65-2400RK UL
    65-2400RK-05
    CSA

    65-2516RK
    CSA

    CSA

    Warranty

    CSA

    UL

    65-2460RK UL
    65-2460RK-05 CSA

    One year materials and workmanship

    Specifications subject to change without notice.

    Made in the USA

    Authorized Distributor:
    A9812

    ISO 9001:2000

    Toll Free: (800) 754-5165 Phone: (510) 441-5656


    Fax: (510) 441-5650 www.rkiinstruments.com

    You might also like