Applied Physics Letters - Guideline
Applied Physics Letters - Guideline
Applied Physics Letters - Guideline
Manuscript Length
Manuscripts should not exceed 3500 words (approximately four printed
journal pages). Abstract, title, author list, references and acknowledgments are all excluded
from the 3500-word limit. Figures, tables, and equations, however, are included and must be
accounted for by calculating a word count equivalent to the space they occupy. Circumvention of
the length limitation by dividing a long article into smaller parts is contrary to the purpose of this
journal.
Please use these guidelines for estimating length.
TeX users
Authors are advised to use the REVTeX 4.1 APL style file. If the double-column version of the
manuscript obtained using the reprint option fits on four pages, the length is acceptable.
Word users
Highlight the manuscript text, excluding abstract, author list, acknowledgements and references,
and note the word count at the bottom of the screen. Add to that the word-count-equivalents for
figures, tables and equations as follows:
Figures: An average single-column figure will displace 220 words. For a more
accurate estimation, use the following: {150/aspect ratio) + 20 words] for singlecolumn figures, and [(300/(0.5 x aspect ratio)) + 40 words] for double-column
figures. Aspect ratio = width/height.
Tables: 6.5 words per line, plus 13 words for single-column tables. 13 words
per line, plus 26 words for double-column tables.
Equations: 16 words per row for single-column equations. 32 words per row
for double-column equations.
If the total number of words (text + figures + tables + equations) is 3500 or less, the length is
acceptable.
Preparing graphics
Guidelines
If you embed figures in place in your article-text file, you will be asked
to upload individual figure files if your paper is accepted for publication.
Number figures in the order in which they appear in text.
Identify all figure parts with (a), (b), etc. Avoid any large size differences
of the lettering and labels used within one illustration.
Submit illustrations in the size and resolution you wish them to
appear in print.
o
For ADV, APM, BMF, JRSE, and SDY (online-only journals)
The maximum published width of figures is 5 3/8 inches (13.65 cm). The
maximum depth of figures should be 8 in. (21.1 cm). Legends or labels within
figures should be a minimum of 8-point type size (2.8 mm high; 1/8 in. high). A
minimum of 0.5 point width for lines.
o
For JMP and PHF (one-column journals)
The maximum published width of figures is 6.69 inches (17 cm).
o
For APL, APR, CHA, JAP, JCP, JPCRD, POP, and RSI
The maximum published width for a one-column figure is 3.37 inches (8.5 cm).
The maximum width for a two-column figure is 6.69 inches (17 cm). Each
illustration should be prepared for 100% reproduction in order to avoid problems
arising from large reductions in size.
Ensure that lettering and lines are dark enough and thick
enough to reproduce clearly, especially if reduction is necessary. Remember
that fine lines tend to disappear upon reduction.
Color online only (RGB) is a free service; Color in Print (CMYK) may
require fees (seeColor Printing Charges).
IMPORTANT: All fonts must be embedded in your figure files.
Use these file formats only: EPS (preferred format), PS, TIFF (.tif),
PDF, JPEG (.jpg). Application files (e.g., Corel Draw, Microsoft Word) are not
acceptable.
Scalable vector formats (i.e. EPS and PS) are greatly preferred. AIP
Publishing suggests the use of Adobe Illustrator (Paid, OS X, Windows)
or Inkscape (Freeware, OS X, Windows, Linux) for the creation of acceptable
illustrations and Adobe Photoshop (Paid, OS X, Windows) or GIMP (Freeware, OS X,
Windows, Linux) for the editing of acceptable photographs.
Submit a single file for each figure with figure parts; label each part (a), (b),
etc.
When submitting your manuscript, include all illustrations and line art for
your paper.
Set the correct orientation for each graphics file.
o
Set the graphic for:
o
o
o
Line art: 600 dpi resolution and black/white bitmap, not grayscale.
Halftones: 264 dpi resolution and grayscale, not black/white bitmap.
Combinations (line art + halftone): 600 dpi and grayscale, not
black/white bitmap.
Color: 300 dpi TIFF, PS, or EPS format. If selecting a file mode,
use CMYK (cyan, magenta, yellow, black) for color figures in print or RGB (red,
green, blue) for color figures online only.
PDF should be used as the source file for illustrations only when the preferred
formats (PS,EPS, or TIFF) cannot be generated
Within the PDF illustration, resolution of line art with no shading should be
1200 pixels per inch (PPI).
When creating a PDF through your applications print command, select High
Quality Print.
Color
Illustrations will appear in color in the online journal free of charge to authors.
To take advantage of this free service, you must:
supply color graphics files in the appropriate format (.eps, .ps, .tif, or
o
.pdf only),
o
process,
o
ensure that colors chosen will reproduce well when printed in black &
white, and