Asme 830 2-2005
Asme 830 2-2005
Asme 830 2-2005
-4 6 in. (8 mm)
Over 546 in. to 'h in. (13
mm)
Over 1 in. to in. (19
mm)
Up to
Maximum Allowable
Reduction From
Nominal Diameter
lMin. (0.4 mm)
in. (0.8 mm)
oM/
o
o
(OS)
manufacturer,
thecrane or
hoist
manufacturer,
or a qual
ified person.
2-2.4.3 Rope
Maintenance
(a)
Rope
sharp bends.
(e) Rope should be maintained in a well-lubricated
condition. Lubricant applied as part of a maintenance
program shall be compatible with the original
lubricant. Lubricant applied shall be of the type that
does not hinder visual inspection. Tu.ose sections of
rope that are located over sheaves or otherwise
hidden during inspection and maintenance prcedures
require special attention when the rope is being
lubricated. The object of rope lubrication is to reduce
intemal friction and to prevent corrosion.
21