Rheofinish 211 MSDS

Safety data sheet
Page: 1/8
BASF Safety data sheet
Date / Revised: 10.08.2011
Product: RHEOFINISH 211
Version: 1.0
(30366347/SDS_GEN_AU/EN)
Date of print 11.08.2011
1. Substance/preparation and company identification
RHEOFINISH 211
Use: Product for construction chemicals
Company:
BASF Australia Limited (ABN 62 008 437 867)
Level 12, 28 Freshwater Place Southbank
Victoria 3006, AUSTRALIA
Telephone: +61 3 8855-6600
Telefax number: +61 3 8855-6511
Emergency information:
BASF Emergency Advice Number: 1800 803 440 (24h) [within Australia]
BASF Emergency Advice Number: + 61 3 8855 6666 [outside Australia]
2. Hazard identification
No specific dangers known, if the regulations/notes for storage and handling are considered.
NON-HAZARDOUS SUBSTANCE, NON-DANGEROUS GOODS
3. Composition/information on ingredients
Chemical nature
Emulsion based on: vegetable oils, in water
Page: 2/8
Version: 1.0
4. First-Aid Measures
General advice:
First aid personnel should pay attention to their own safety. Remove contaminated clothing.
If inhaled:
If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medical
attention.
On skin contact:
After contact with skin, wash immediately with plenty of water and soap. If irritation develops, seek
medical attention.
On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye
specialist.
On ingestion:
Rinse mouth immediately and then drink plenty of water, seek medical attention. Do not induce
vomiting unless told to by a poison control center or doctor.
Note to physician:
Symptoms: No significant symptoms are expected due to the non-classification of the product.
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific
antidote.
5. Fire-Fighting Measures
Suitable extinguishing media:
foam, water spray, dry powder, carbon dioxide
Unsuitable extinguishing media for safety reasons:
water jet
Specific hazards:
carbon monoxide, carbon dioxide, harmful vapours, nitrogen oxides, fumes/smoke, carbon black
Special protective equipment:
Wear a self-contained breathing apparatus.
Further information:
The degree of risk is governed by the burning substance and the fire conditions. Contaminated
extinguishing water must be disposed of in accordance with official regulations.
6. Accidental Release Measures

Personal precautions:
Use personal protective clothing. Do not breathe vapour/aerosol/spray mists. Sources of ignition
should be kept well clear. Handle in accordance with good building materials hygiene and safety
practice.
Page: 3/8
Version: 1.0
Environmental precautions:
Contain contaminated water/firefighting water. Do not discharge into drains/surface
waters/groundwater.
Methods for cleaning up or taking up:
For small amounts: Pick up with inert absorbent material (e.g. sand, earth etc.). Dispose of
contaminated material as prescribed.
For large amounts: Pump off product.
7. Handling and Storage

Handling
Wear respiratory protection when spraying. Avoid inhalation of mists/vapours. Avoid skin contact.
Wear suitable protective clothing and eye/face protection. No special measures necessary provided
product is used correctly.
Protection against fire and explosion:
No special precautions necessary.
Storage
Suitable materials for containers: High density polyethylene (HDPE)
Further information on storage conditions: Keep only in the original container in a cool, dry,
well-ventilated place away from ignition sources, heat or flame. Store protected against freezing.
Protect from direct sunlight.
Protect from temperatures below: 0 C
The packed product must be protected from temperatures below the indicated one.
Protect from temperatures above: 30 C
8. Exposure controls and personal protection

Components with workplace control parameters
The substances without values are not listed in the occupational exposure regulations for the validity
area of this safety data sheet.
no exposure standard allocated
Personal protective equipment
Respiratory protection:
Wear respiratory protection if ventilation is inadequate. Combination filter for gases/vapours of
organic, inorganic, acid inorganic and alkaline compounds (e.g. EN 14387 Type ABEK).
Hand protection:
impermeable gloves
Synthetic rubber gloves
Page: 4/8
Version: 1.0
Manufacturer's directions for use should be observed because of great diversity of types.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection:
light protective clothing
General safety and hygiene measures:
In order to prevent contamination while handling, closed working clothes and working gloves should be
used. Handle in accordance with good building materials hygiene and safety practice. When using, do
not eat, drink or smoke. Hands and/or face should be washed before breaks and at the end of the shift.
At the end of the shift the skin should be cleaned and skin-care agents applied. Gloves must be
inspected regularly and prior to each use. Replace if necessary (e.g. pinhole leaks).
9. Physical and Chemical Properties

Form:
Colour:
Odour:
liquid
white
mild
pH value:
8.0 - 9.0
(20 C)
Melting point:
boiling temperature:
approx. -4 C
approx. 100 C
Flash point:
Flammability:
Density:
A flash point determination is

unnecessary due to the high water
content.
Not flammable
0.96 g/cm3
(20 C)
Miscibility with water:

(20 C)
miscible
Viscosity, dynamic:
Viscosity, kinematic:
approx. 10 mPa.s
(20 C)
> 7 mm2/s
(20 C)
Other Information:
If necessary, information on other physical and chemical parameters is indicated in this section.
10. Stability and Reactivity

Conditions to avoid:
See MSDS section 7 - Handling and storage.
Page: 5/8
Version: 1.0
Thermal decomposition:
No decomposition if stored and handled as

prescribed/indicated.
Substances to avoid:
strong acids, strong bases, strong oxidizing agents
Corrosion to metals:
No corrosive effect on metal.
Hazardous reactions:
The product is stable if stored and handled as prescribed/indicated.
No hazardous decomposition products if stored and handled as prescribed/indicated.
11. Toxicological Information

Acute toxicity
Assessment of acute toxicity:
Virtually nontoxic after a single ingestion. The product has not been tested. The statement has been
derived from products of a similar structure or composition.
Irritation
Assessment of irritating effects:
Not irritating to eyes and skin. No irritation is expected under intended use and appropriate handling.
Sensitization
Assessment of sensitization:
No sensitizing effect.
Repeated dose toxicity

Assessment of repeated dose toxicity:
No reliable data was available concerning repeated dose toxicity.
Genetic toxicity
Assessment of mutagenicity:
The chemical structure does not suggest a specific alert for such an effect. The product has not been
tested. The statement has been derived from the properties of the individual components.
Carcinogenicity
Assessment of carcinogenicity:
The chemical structure does not suggest a specific alert for such an effect.
Reproductive toxicity
Assessment of reproduction toxicity:
Page: 6/8
Version: 1.0
The chemical structure does not suggest such an effect. The product has not been tested. The
statement has been derived from the properties of the individual components.
Developmental toxicity
Assessment of teratogenicity:
The chemical structure does not suggest such an effect. The product has not been tested. The
statement has been derived from the properties of the individual components.
Other relevant toxicity information

Based on our experience and the information available, no adverse health effects are expected if
handled as recommended with suitable precautions for designated uses. The product has not been
tested. The statements on toxicology have been derived from products of a similar structure and
composition.
12. Ecological Information

Ecotoxicity
Assessment of aquatic toxicity:
At the present state of knowledge, no negative ecological effects are expected. There is a high
probability that the product is not acutely harmful to aquatic organisms. The product has not been
tested. The statement has been derived from products of a similar structure or composition.
Mobility
Assessment transport between environmental compartments:
No data available.
Persistence and degradability

Assessment biodegradation and elimination (H2O):
Inherently biodegradable. The insoluble fraction can be removed by mechanical means in suitable
waste water treatment plants.
Elimination information:
> 70 % (28 d) Readily biodegradable (according to OECD criteria).
Bioaccumulation potential
Assessment bioaccumulation potential:
No data available concerning bioaccumulation.
Additional information
Other ecotoxicological advice:
According to experience, the material has no harmful effect on the environment. Do not discharge
substance/product into sewer system.
Page: 7/8
Version: 1.0
13. Disposal Considerations

Observe national and local legal requirements.
Residues should be disposed of in the same manner as the substance/product.
Contaminated packaging:
Contaminated packaging should be emptied as far as possible; then it can be passed on for recycling
after being thoroughly cleaned.
14. Transport Information

Domestic transport:
Not classified as a dangerous good under transport regulations
Sea transport
IMDG
Air transport
IATA/ICAO
15. Regulatory Information

Poisons Schedule: Not scheduled
Regulations of the European union (Labelling)
EEC Directives:
The product does not require a hazard warning label in accordance with EC Directives.
Other regulations
If other regulatory information applies that is not already provided elsewhere in this safety data sheet,
then it is described in this subsection.
Registration status:
AICS, AU
released / listed
Page: 8/8
Version: 1.0
16. Other Information
In addition to the information given in the safety data sheet we refer to the product specific 'Technical
Information'.
Vertical lines in the left hand margin indicate an amendment from the previous version.
The data contained in this safety data sheet are based on our current knowledge and experience and
describe the product only with regard to safety requirements. The data do not describe the product's
properties (product specification). Neither should any agreed property nor the suitability of the product for
any specific purpose be deduced from the data contained in the safety data sheet. It is the responsibility of
the recipient of the product to ensure any proprietary rights and existing laws and legislation are observed.

Rheofinish 211 MSDS

Uploaded by

Copyright:

Available Formats

Rheofinish 211 MSDS

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Rheofinish 211 MSDS

Uploaded by

Copyright:

Available Formats

Safety data sheet

1. Substance/preparation and company identification

6. Accidental Release Measures

7. Handling and Storage

8. Exposure controls and personal protection

9. Physical and Chemical Properties

A flash point determination is

Miscibility with water:

10. Stability and Reactivity

No decomposition if stored and handled as

No corrosive effect on metal.

11. Toxicological Information

Repeated dose toxicity

Other relevant toxicity information

12. Ecological Information

Persistence and degradability

13. Disposal Considerations

14. Transport Information

15. Regulatory Information

16. Other Information

You might also like