r8150 User Manual
r8150 User Manual
r8150 User Manual
ROTARY SHAVER
FLEX AND PIVOT TECHNOLOGY
7
1
2
8
4
Model No. R8150
! Remington
.
www.remington-products.ru.
5
10
5
04.03.2009 22:29:12 Uhr
United Kingdom
ENGLISH
Thank you for choosing Remington. Our products are designed to meet the
highest standard of quality, functionality and design. We hope you enjoy using
your new Remington appliance. Please read the instructions for use carefully
and keep in a safe place for future reference.
CAUTION
Use this appliance only for its intended use as described in this manual. Do not use
attachments not recommended by Remington.
Do not use this product if it is not working correctly, if it has been dropped or damaged,
or dropped into water.
DESCRIPTION
1 Pivoting Head & cutter assembly
2 Head release button
3 Individual flexing heads
4 On/Off Push button
5 Power port
6 LCD Display
- Minutes remaining
- Recharge warning
7 Trimmer button
8 Head guard
9 Power plug
10 Cleaning brush
ENGLISH
Feature
Power System
R8150
Cord/
Cordless
90 minutes
Cordless Shave
Time
60 minutes
Quick Charge
Yes
Indicators
LCD
Voltage Type
Worldwide
Replacement
Part No.
637)
GETTING STARTED
For best shaving performance, it is recommended that you use your new shaver daily
for up to four weeks to allow time for your beard and skin to become accustomed to
the new shaving system.
CHARGING YOUR SHAVER
Always ensure that your hands, shaver and power cord are dry before charging your
shaver.
Ensure the shaver is switched off. Connect the shaver to the adapter (Fig. A), then to the
mains (Fig. B) and charge for at least 24 hours when using for the first time (Fig. C).
Place your shaver in the charging stand, connect the charging adaptor to the stand
and then to the mains.
Charge for at least 24 hours when using for the first time.
After the shaver batteries are fully charged, the LCD display will indicate
the shaver is fully charged.
Use product until the battery is low. This is indicated by the LCD display.
Fully recharge for 24 hours every 6 months to maintain battery condition.
When empty, the battery will be fully charged around 90 minutes
The shaver adapts automatically to a mains voltage between 100V and 240V.
CORDED USE
Connect the shaver to the adapter, then to the mains and recharge for 5 min. before using.
ENGLISH
CAUTION:
Extended mains only use will result in the reduction of the battery life.
HOW TO USE
SHAVING
Switch the shaver on (Fig. D).
Use the trimmer to remove long hair first (see below).
Hold the shaving head so all three heads touch your face simultaneously (Fig.E). The
independently floating heads will automatically adjust to the contours of your face.
Stretch the skin with your free hand so the hairs stand upright.
Only apply light pressure on the shaving head while shaving (pressing too hard can damage
the heads and make them vulnerable to breakage).
Use short, circular strokes.
TRIMMING
Push the trimmer button down (Fig. F). Place trimmer at desired trim line for a quick, easy,
professional trim. Hold the shaver as shown in the illustration (Fig. G). To retract and
switch off the trimmer, push the trimmer lock button in and downwards (Fig. H).
ENGLISH
CLEANING DAILY
Ensure the shaver is switched off and unplugged from the mains.
Open the shaver head by pressing the release button on the front of the shaver (Fig. I) and
flipping open the head away from the body of the shaver (Fig. J).
Rinse the shaver head with warm water (Fig. K).
Close head assembly (Fig. L).
CLEANING WEEKLY
Perform the daily cleaning steps first.
Open the shaver head by pressing the release button on the front of the shaver (Fig. I)
and flipping open the head away from the body of the shaver (Fig. J).
Release the inner cutter carrier by rotating the locking arms counter-clockwise (Fig. M)
Pull the inner cutter carrier away from the inner cutters (Fig. N).
Thoroughly brush hairs from the inner and outer cutters (Fig. P) and rinse out remaining debris .
Replace inner cutter (Fig.O).
Place the inner cutter carrier back onto the upper hairpocket and lock in place by rotating
the locking arms clockwise until the arms click into place (Fig. Q - R)
CAUTION:
Never submerge your shaver in water. The shaver can be rinsed with water. The water
temperature should not exceed 70 degrees. Attention. Unplug the shaver before cleaning with
water. Keep the adaptor and cable dry.
CLEANING TRIMMER
Lubricate the teeth of the trimmer every six months with one drop of sewing machine oil.
Always unplug from the mains when cleaning or when being used under running water.
Only use parts supplied or recommended by Remington.
Do not submerge.
Keep this product out of reach of children. The use of this appliance by persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge can
give cause to hazards. Persons responsible for their safety should give explicit instructions
or supervise the use of the appliance.
ENGLISH
TROUBLESHOOTING
If your shaver battery is completely empty or the shaver has not been used for an
extended period of time, the shaver may not start when operated using the cord. If this
occurs, charge the shaver for approximately 15 sec. before shaving.
Your shaver should be mainly used in cordless mode and only recharged when battery
charge is low. Extended mains only use or continuous connection to the mains will result in
the reduction of the battery life.
ENGLISH
BATTERY REMOVAL
DANGER:
Once the shaver has been dismantled for disposal, do not attempt to reassemble and/or use.
Unplug the shaver.
Remove the head from the shaver (Press release button and pull head straight away from
the shaver body)
Using a small screwdriver, pry front cover from the shaver.
Remove the 4 screws located on the front of shaver. (Fig. S )
Remove rear cover from inner housing to expose batteries (Fig. T )
Pry batteries free from circuit board and cut wires (Fig. U - V )
Dispose of batteries