Pricelist For ML-Class (W 164) : Version 1/10
Pricelist For ML-Class (W 164) : Version 1/10
Pricelist For ML-Class (W 164) : Version 1/10
ML-Class (W 164)
Version 1/10
All listed performance figures are approximate values. They depend on vehicle-specific details such as the vehicle type,
equipment, tare weight, rear-axle ratio, wheel-tyre combinations, transmission type and aerodynamic equipment of the
specific car. Figures about performance increases and/or performance kits are to be understood as average values.
Test-dependent divergences of +/- 5% are possible. Figures about the overall performance of changed factory engines
through performance increases and/or performance kits are based on the manufacturers data listed in the vehicle
registration document, which can vary by +/- 5%.
BRABUS does not warrant any further reduced performance of factory engines.
Prices effective from November 13th, Pricelist ML-Class 2009.
Information correct at print. Prices and specifications are subject to change without prior notice.
All prices are net and exclude taxes.
All deliveries and works are to be carried out according to our terms of delivery, payment and assembly.
Any errors or omissions during printing are not legally binding.
Reprint or copying, partly or in whole, only after agreement with editor.
Responsible for contents: BRABUS GmbH, Brabus-Allee, D-46240 Bottrop, Germany.
Page 3
Price net
Aerodynamics, design
All BRABUS aerodynamic components have been certified with
regard to vehicle handling and material safety. They are designed
in a way that all mounting points are invisible after installation.
BRABUS WIDESTAR
15,500.00
14,900.00
Installation
painting
990.00
1,990.00
980.00
90.00
120.00
1,790.00
Installation
painting
340.00
290.00
1,090.00
installation
painting
340.00
290.00
990.00
Installation
painting
190.00
290.00
890.00
190.00
290.00
164-234-01
164-234-02
164-234-00
164-234-80
164-234-90
Front bumper WIDESTAR with fog lamp and high beam kit
Rear bumper WIDESTAR and side skirts WIDESTAR with integrates illumination
Fender flares incl. door panels, extension BRABUS WIDESTAR ca. 40 mm
PUR-R-Rim
with daytime running lights chrome
for facelift vehicles from 09/2008
with daytime running lights dark
for facelift vehicles 09/2008
WITHOUT daytime running lights
for pre-facelift vehicles up to 09/2008
chrome
dark
Installation
painting
164-260-00
164-470-00
164-460-00
installation
painting
Page 4
490.00
installation
painting
110.00
290.00
490.00
110.00
290.00
640.00
Installation
painting
160.00
190.00
620.00
Montage
Lackierung
160.00
190.00
620,00
100,00
280,00
164-360-11
390.00
80.00
164-340-00
199.00
50.00
1,290.00
installation
painting
210.00
290.00
1,498.00
installation
painting
280.00
280.00
Rear spoiler
installation
painting
490.00
110.00
230.00
164-200-00
164-400-00
installation
painting
164-252-00
164-290-00
164-310-00
164-450-00
Page 5
Price net
Page 6
All BRABUS alloy wheels are suitable for use with original Mercedes tyre-pressure monitoring systems (RDK).
For cars with RDK-system (Code 475) please order part number RDK-S...MHz separately. The load and speed index
to be used for the tyres depends on the specific vehicle model. All BRABUS wheels have been tested by the German
TV regarding driving dynamics and material safety and are supplied with according TV certification.
The assembly costs for all wheels are 15.00 net
front+rear
612-002-35
front
612-002-30
rear
1,290.00
1,290.00
1,290.00
1,080.00
1,080.00
1,080.00
1,080.00
1,080.00
1,950.00
1,950.00
1,950.00
566.50
557.50
557.50
557.50
front
622-950-40-RDK
rear
622-950-48-RDK
front+rear
622-950-35-RDK
front
622-950-30-RDK
rear
442.50
442.50
479.50
495.50
495.50
495.50
front+rear
632-051-34-02
front
632-051-29-02
rear
658.50
533.00
533.00
533.00
Page 7
Price net
front + rear
A13-808-42-XL
front + rear
330.00
330.00
590.00
590.00
590.00
590.00
750.00
750.00
750.00
790.00
790.00
990.00
990.00
990.00
990.00
990.00
1,290.00
1,290.00
1,290.00
314.50
284.50
284.50
332.50
front
S12-808-42-XL
rear
S12-808-51-XL
front
S12-808-47-XL
rear
S12-859-54-XL
front
S12-859-44-XL
rear
S12-859-48-XL
front
S12-959-49-XL
rear
S12-959-49-XL
front+rear
S12-950-47-XL
front
S12-950-42-XL
rear
S12-950-47-XL
front+rear
S12-950-37-XL
front
S12-950-32-XL
rear
S12-051-50
front+rear
S12-051-34
front
S12-051-30
rear
284.50
284.50
332.50
332.50
370.00
370.00
370.00
389.50
389.50
442.50
442.50
479.50
495.50
495.50
495.50
658.50
533.00
533.00
533.00
Page 8
front+rear
S12-002-35-XL
front
S12-002-30-XL
rear
1,390.00
1,390.00
1,390.00
890.00
890.00
890.00
890.00
890.00
1,350.00
1,350.00
1,350.00
1,350.00
1,350.00
1,350.00
2,450.00
2,450.00
2,450.00
566.50
557.50
557.50
557.50
front
E10-950-40-XL
rear
E10-950-48-XL
front+rear
E10-950-35-XL
front
E10-950-30-XL
rear
E10-002-49-XL
front+rear
E10-002-45-XL
front
E10-002-45-XL
rear
E10-002-45-XL
front+rear
E10-002-35-XL
front
E10-002-30-XL
rear
442.50
442.50
479.50
495.50
495.50
495.50
402.50
402.50
454.50
566.50
557.50
557.50
557.50
front+rear
E30-103-34-XL
front
E30-103-30-XL
rear
710.50
710.50
710.50
Page 9
Price net
front
Q12-950-40-XL
rear
Q12-950-48-XL
front+rear
Q12-950-35-XL
front
Q12-950-30-XL
rear
Q12-002-45-XL
front+rear
Q12-002-35-XL
front
Q12-002-30-XL
rear
990.00
990.00
990.00
990.00
990.00
1,350.00
1,350.00
1,350.00
1,950.00
1,950.00
1,950.00
2,250.00
2,250.00
2,250.00
442.50
442.50
479.50
495.50
495.50
495.50
566.50
557.50
557.50
557.50
front+rear
F14-051-34
front
F14-051-30
rear
658.50
533.00
533.00
533.00
front+rear
G14-002-35
front
G14-002-30
rear
No modifications required
(ABE)
566.50
557.50
557.50
557.50
Page 10
Accessories
000-100-16
160.00
VG-01-AL
18.90
RS-...
60.00
105.00
10.00
105.00
10.00
105.00
10.00
105.00
10.00
105.00
10.00
105.00
10.00
RDK sensors
System Schrader Electronics (Code 475 and from MY-Code 800)
for vehicles from 09/2009
RDK-SCH1-433 MHz (worldwide)
RDK-Sensor System
for all BRABUS wheels except Monoblock VI 2-piece
(4 sensors neccessary per car)
installation
RDK-SCH2-433 MHz (Weltweit)
RDK-Sensor System for BRABUS Monoblock VI 2-piece
(4 sensors neccessary per car)
installation
installation
RDK-VDO1-315 MHz (USA/Canada and Far East)
RDK-Sensor System
for all BRABUS wheels except Monoblock VI 2-piece
(4 sensors neccessary per car)
installation
RDK-VDO2-433 MHz (worldwide except USA/Canada and Far East)
RDK-Sensor System for BRABUS Monoblock VI 2-piece
(4 sensors neccessary per car)
installation
RDK-VDO2-315 MHz (USA/Canada and Far East)
RDK-Sensor System for BRABUS Monoblock VI 2-piece
(4 sensors neccessary per car)
installation
Page 11
Price net
Custom suspensions
164-006-00
390.00
installation
490.00
1,490.00
installation
490.00
1,290.00
installation
160.00
170.00
4,900.00
installation
400.00
6,900.00
installation
590.00
17,900.00
590.00
164-016-00
164-106-00
for vehicles with air suspension (with AIRMATIC package code 489)
000-101-97
Brake systems
164-691-00
164-692-00
consisting of:
Version I, plus additionally 2 four-piston-aluminium-fixed
rear calipers, steelflex brake hoses, brake pads and installation hardware
(only in connection with BRABUS 20" and 22" wheels)
164-693-00
consisting of:
2 twelve-piston-aluminium-fixed front calipers,
2 vented and perforated front discs (380 x 36 mm),
2 six-piston-aluminium-fixed rear calipers,
2 vented and perforated rear discs (355 x 28 mm),
steelflex brake hoses, brake pads and installation hardware
(only in connection with BRABUS 20" and 22" wheels)
installation
* Important Note
This system is designed for the ultimate in high performance braking. The composition of the rotor/discs
and pads are designed to deliver high performance braking in all ranges, however it must be noted that as
a characteristic of these materials, some brake noise/squeal may result as well as a differing pedal/
braking feel at lower brake temperatures vs. higher brake temperatures.
Page 12
4,980.00
installation
164-697-00
incl.
7,900.00
installation
890.00
6,980.00
installation
290.00
8,920.00
520.00
1,690.00
installation
110.00
1,790.00
installation
110.00
2,980.00
110.00
17,900.00
installation
1,500.00
20,900.00
1,200.00
164-708-00
164-733-00
installation
164-736-00
164-738-00
installation
Increased-displacement engines
164-740-00
164-658-00
installation
Page 13
Price net
24,050.00
installation
1,200.00
29,050.00
installation
1,200.00
29,000.00
installation
1,200.00
164-762-00
69,800.00
NEW
164-662-00
164-662-00S
164-761-00
installation
000-620-00
incl.
790.00
890.00
25.00
1,690.00
installation
240.00
1,690.00
installation
240.00
1,690.00
installation
240.00
1,790.00
240.00
000-620-01
B-PFR6N-11
Sports exhaust
164-670-00
164-670-35
164-670-80
164-670-85
installation
Page 14
164-600-00
2,490.00
installation
315.00
3,890.00
installation
315.00
980.00
70.00
590.00
installation
70.00
BRABUS sports steering wheel 385 mm (not for cars with Code 809)
for vehicles up to 09/2008
890.00
70.00
164-600-01
Instruments
164-832-00
installation
on request
164-805-03
164-805-04
164-805-05
164-805-06
164-805-07
164-805-08
installation
BRABUS sports steering wheels
for vehicles from 09/2008
upon request
164-816-00
160.00
95.00
203-819-00
80.00
40.00
164-350-00
395.00
112.00
installation
164-850-00
164-850-01
164-850-02
164-850-03
164-850-04
Page 15
95.00
45.00
790.00
89.00
4,400.00
installation
X164-858-01
1.290,00
164-857-02
360.00
164-857-03
490.00
164-858-03
640.00
164-862-01
600.00
164-865-11
2,900.00
500.00
164-864-12
1,100.00
190.00
164-861-00
3,300.00
164-867-11
2,600.00
164-868-11
2,700.00
164-868-12
520.00
164-859-08
1,520.00
152,00
98.00
98.00
164-871-00
164-871-01
164-871-02
Page 16
type
size in
offset
front
rear
A13-808-57-XL
one-piece
8.0Jx18H2
57
A13-808-67-XL
AP-10-M14-15-50
A13-808-42-XL
one-piece
8.0Jx18H2
42
A13-808-67-XL
AP-25-M14-15-65
S12-808-51-XL
one-piece
8.0Jx18H2
51
S12-808-67-XL
AP-16-M14-15-56
S12-808-47-XL
one-piece
8.0Jx18H2
47
S12-808-67-XL
AP-20-M14-15-60
S12-808-42-XL
one-piece
8.0Jx18H2
42
S12-808-67-XL
AP-25-M14-15-65
S12-859-54-XL
one-piece
8.5Jx19H2
54
S12-859-64-XL
AP-10-M14-15-50
S12-859-48-XL
one-piece
8.5Jx19H2
48
S12-859-64-XL
AP-16-M14-15-56
S12-859-44-XL
one-piece
8.5Jx19H2
44
S12-859-64-XL
AP-20-M14-15-60
S12-959-49-XL
one-piece
9.5Jx19H2
49
S12-959-65-XL
AP-16-M14-15-56
622-950-48-RDK
VI
multi-piece
9.5Jx20H2
48
622-950-60-RDK
AP-12-M14-15-52
622-950-40-RDK
VI
multi-piece
9.5Jx20H2
40
622-950-60-RDK
AP-20-M14-15-60
622-950-35-RDK
VI
multi-piece
9.5Jx20H2
35
622-950-60-RDK
AP-25-M14-15-65
622-950-30-RDK
VI
multi-piece
9.5Jx20H2
30
622-950-60-RDK
ADS2-30 + SP-M14-15-41
S12-950-47-XL
one-piece
9.5Jx20H2
47
S12-950-67-XL
AP-20-M14-15-60
S12-950-42-XL
one-piece
9.5Jx20H2
42
S12-950-67-XL
AP-25-M14-15-65
S12-950-37-XL
one-piece
9.5Jx20H2
37
S12-950-67-XL
ADS2-30 + SP-M14-15-41
S12-950-32-XL
one-piece
9.5Jx20H2
32
S12-950-67-XL
ADS2-35 + SP-M14-15-41
E10-950-48-XL
one-piece
9.5Jx20H2
48
E10-950-60-XL
AP-12-M14-15-52
E10-950-40-XL
one-piece
9.5Jx20H2
40
E10-950-60-XL
AP-20-M14-15-60
E10-950-35-XL
one-piece
9.5Jx20H2
35
E10-950-60-XL
AP-25-M14-15-65
E10-950-30-XL
one-piece
9.5Jx20H2
30
E10-950-60-XL
ADS2-30 + SP-M14-15-41
Q12-950-48-XL
one-piece
9.5Jx20H2
48
Q12-950-60-XL
AP-12-M14-15-52
Q12-950-40-XL
one-piece
9.5Jx20H2
40
Q12-950-60-XL
AP-20-M14-15-60
Q12-950-35-XL
one-piece
9.5Jx20H2
35
Q12-950-60-XL
AP-25-M14-15-65
Q12-950-30-XL
one-piece
9.5Jx20H2
30
Q12-950-60-XL
ADS2-30 + SP-M14-15-41
632-051-49-02
VI
three-piece
10.5Jx21H2
49
632-051-59-02
AP-10-M14-15-50
632-051-34-02
VI
three-piece
10.5Jx21H2
34
632-051-59-02
AP-25-M14-15-65
632-051-29-02
VI
three-piece
10.5Jx21H2
29
632-051-59-02
AP-05-M14-15-45
S12-051-50
one-piece
10.5Jx21H2
50
S12-051-50
SP-M14-15-41
S12-051-34
one-piece
10.5Jx21H2
34
S12-051-50
AP-16-M14-15-56
S12-051-30
one-piece
10.5Jx21H2
30
S12-051-50
AP-20-M14-15-60
F14-051-50
one-piece
10.5Jx21H2
50
F14-051-50
SP-M14-15-41
F14-051-34
one-piece
10.5Jx21H2
34
F14-051-50
AP-16-M14-15-56
F14-051-30
one-piece
10.5Jx21H2
30
F14-051-50
AP-20-M14-15-60
part no.
18
19
X
X
20
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
21
X
X
X
X
X
X
Page 17
Price net
type
size in
offset
612-002-45
VI
one-piece
10Jx22H2
45
612-002-35
VI
one-piece
10Jx22H2
35
612-002-30
VI
one-piece
10Jx22H2
S12-002-49-XL
one-piece
S12-002-45-XL
one-piece
S12-002-35-XL
S12-002-30-XL
part no.
front
rear
612-002-65
AP-20-M14-15-60
612-002-65
ADS2-30 + SP-M14-15-41
30
612-002-65
ADS2-35 + SP-M14-15-41
10Jx22H2
49
S12-002-65-XL
AP-16-M14-15-56
10Jx22H2
45
S12-002-65-XL
AP-20-M14-15-60
one-piece
10Jx22H2
35
S12-002-65-XL
ADS2-30 + SP-M14-15-41
one-piece
10Jx22H2
30
S12-002-65-XL
ADS2-35 + SP-M14-15-41
E10-002-49-XL
one-piece
10Jx22H2
49
E10-002-65-XL
AP-16-M14-15-56
E10-002-45-XL
one-piece
10Jx22H2
45
E10-002-65-XL
AP-20-M14-15-60
E10-002-35-XL
one-piece
10Jx22H2
35
E10-002-65-XL
ADS2-30 + SP-M14-15-41
E10-002-30-XL
one-piece
10Jx22H2
30
E10-002-65-XL
ADS2-35 + SP-M14-15-41
Q12-002-45-XL
one-piece
10Jx22H2
45
E10-002-65-XL
AP-20-M14-15-60
Q12-002-35-XL
one-piece
10Jx22H2
35
E10-002-65-XL
ADS2-30 + SP-M14-15-41
Q12-002-30-XL
one-piece
10Jx22H2
30
E10-002-65-XL
ADS2-35 + SP-M14-15-41
G14-002-45
one-piece
10Jx22H2
45
E10-002-65-XL
AP-20-M14-15-60
G14-002-35
one-piece
10Jx22H2
35
E10-002-65-XL
ADS2-30 + SP-M14-15-41
G14-002-30
one-piece
10Jx22H2
30
E10-002-65-XL
ADS2-35 + SP-M14-15-41
E30-103-50-XL
three-piece
11Jx23H2
50
E30-103-50-XL
SP-M14-15-41
E30-103-34-XL
three-piece
11Jx23H2
34
E30-103-50-XL
AP-16-M14-15-56
E30-103-30-XL
three-piece
11Jx23H2
30
E30-103-50-XL
AP-20-M14-15-60
22
X
X
X
X
X
23
All wheels are suitable for use with Mercedes RDK systems (tyre-pressure monitoring systems).
X
X
B. Conclusion of contract
Our offers remain subject to being sold. Conclusions of contract and other agreements, in particular oral collateral agreements and
guarantees of employees or representatives, may be binding only with our written confirmation.
C. Prices
1. Our prices for deliveries are ex works, except as otherwise specified in our confirmation of order. Packing, freight, postage,
insurance and delivery fees shall be charged separately.
2. Prices for repairing, installation and other services are in principle chargeable with respect to the respective expense. However,
manhours are chargeable with respect to the respective catalogue for working value in the event our respective price catalogue
does not contain appropriate quotations. Respective decisive catalogue prices may be charged for employed parts.
3. Price quotations in brochures and catalogues are only binding, provided such brochures and catalogues are still valid in the event
of placing a purchase order and our confirmation of order does not state any deviations.
4. Our respective stipulated gross prices shall be applicable for consumers. Statutory sales tax for price quotations are not included
in business tradings with entrepreneurs or merchants. The statutory amount of such sales tax may be set out separately in the
respective invoice.
G. Warranties
1. The contractual partner is obliged to inspect delivered goods immediately upon receipt and to give written notice of a defect
immediately at the place of destination or, at the latest, within 8 business days upon receipt. Latent defects shall be noticed
immediately upon ascertainment. In the event the contractual partner fails to observe the time limit for notification of a defect,
every possible claim regarding defects not being noticed or being noticed out of time are excluded, if the contractual partner is a
merchant or a legal entity of public law.
2. In case of faulty deliveries or services, BRABUS shall have the opportunity to inspect at its option the noticed defects on the spot
or at its places of business. The inspection shall take place immediately, if the contractual partner explains his interest in
immediate settlement. Goods or services being found faulty shall not be modified without consent of BRABUS. Otherwise, the
contractual partner may lose his claims based on warranty. Divergent from the aforegoing provisions, remediation works of
deficiencies can be executed by another professional work shop at the expense of BRABUS, if the following conditions are fulfilled:
2.1 If the vehicle is out of service due to a defect and has been removed more than 50 km from the plant of BRABUS and BRABUS
has given consent prior to the placing of an order to the third work shop.
2.2 If an urgent case of necessity is given and BRABUS is not able to take remedial actions immediately. The obligation of the
contractual partner to inform BRABUS about the defect stating the address of the commissioned plant remains unaffected.
2.3 In the event defects have been remedied by another professional workshop, the commissioning order shall set forth that the
execution of the remediation works is considered as such of BRABUS. It is imperative to make an entry that the dismantled
parts shall be holding at BRABUS disposal during a reasonable time limit. BRABUS undertakes to reimburse the provable
arising costs of the contractual partner. However, the contractual partner is obliged to keep the costs of remediation works as
low as possible.
3. In case of provable material or implementation defects, BRABUS is entitled to remedy the defects free of charge or to replace free
of charge or to credit the invoice value against return of the defective goods or to grant the contractual partner reduction of the
purchase price by observing reasonably the contractual partners interest. Deviating imperative provisions of law for the benefit of
the consumers remain unaffected.
4. If BRABUS fails to fulfil one of its refined obligations to perform subsequently (replacement/delivery of a substitute or rectification
of defects) or does not meet such obligation according to contract or if the subsequent performance goes wrong, the contractual
partner is entitled to the right of reduction of the purchase price or the right of rescission of the contract within the scope of the
provisions of law. Deviating imperative provisions of law for the benefit of consumers remain unaffected.
5. In the event that defects occur on vehicles which are made available to us for the purpose of executing structural alteration and/or
actions for increasing efficiency and/or installation of special components like engines for increasing efficiency and/or special
running gear and/or of executing maintenance respectively repairing works, our warranty obligation is in principle limited to such
installed parts respectively rendered services. Divergent to the provisions as set forth above in figure 3, BRABUS is obliged to
remedy provable material or implementation defects. This obligation to remedy defects includes vehicle parts not being provided
by BRABUS, if such parts have been directly injured or damaged due to the respective material or implementation defect.
6. Other or further claims of the contractual partner, in particular claims for compensation of handling costs, costs relating to
installation and dismantling as well as damages not relating to the delivery object (consequential damages), are excluded,
provided that they are permitted by statute. Deviating imperative provisions of law for the benefit of consumers remain unaffected.
7. In case line sample has been sent in to the contractual partner, BRABUS is only liable for the circumstance that the delivery will be
executed in accordance with the inspected line sample in the light of any adjustments (stipulation of quality by line sample).
8. Warranty claims as settled in this section are pertaining exclusively to defects of deliveries and services of BRABUS, including any
defects on new vehicles with increasing efficiency, which have been existing on the date the risk in the goods passes to the
respective contractual partner, or defects resulting from material and/or implementation defects, which have been existing on the
date the risk in the goods passes to the contractual partner. The resulting warranty claims of the contractual partner are subject to
a limitation period of 12 months counting from the date of passing the risk in the goods. In case of second hand purchase objects,
any liability for defects as to quality are excluded, unless the existence of such defects has been concealed fraudulently. In case of
contracts with consumers, the limitation period for delivery of new cars and for execution of services runs to 24 months and
limitation period for delivery of used goods runs to 12 months counting from the date of passing the risk in the goods to the
contractual partner.
9. Any information relating to an increase in output and/or to Performance Kits are to be understood as average figures. Due to
testing, deviations of +/- 5 % may occur. Information relating to the overall output of factory motors which have been modified by
an increase in output and/or by Performance Kits are based on the information provided by the manufacturer in the official vehicle
registration which in return may deviate +/- 5 %. Brabus will not be responsible for an output of factory motors which is below the
aforementioned figures.
10.BRABUS-products are TV certified according to EU-regulations. BRABUS does not take responsibility for the performance of any
other national homologation regulations outside Germany.
K. Retention of title
1. BRABUS retains title to the delivered goods until fulfilment of all claims against the contractual partner of the current business
connection in full. The same shall apply, if the price for special deliveries designated by the contractual partner is paid. A
processing and manufacturing may be done by BRABUS. However, BRABUS is not committed to such works and its title may not
become extinct hereby. In the event the contractual partner consolidate the reserved goods with other goods, BRABUS shall obtain
joint ownership on the new object with regard to the invoice value of all consolidated goods. Insofar, the new object shall be
considered as a reserved goods in the sense of these conditions.
2. The contractual partner is entitled to sell the reserved goods in the proper course of business. Any other disposals are prohibited.
3. All claims arising out of the use of the reserved goods shall be resigned to BRABUS in advance. If the reserved goods are sold with
other objects not being owned by BRABUS or are used as material for the execution of contracts for work and services, the
assignment of the reserved goods only covers such portion of revenue, which is equivalent to the portion of the joint ownership of
BRABUS with regard to the reserved goods.
4. The contractual partner is only entitled to collect the resigned claims in the proper course of business.
5. Any intervention on the reserved goods or the resigned claims by any third person may be notified to BRABUS by the contractual
partner. The costs for such intervention shall be borne by the contractual partner.
6. The authorization of the contractual partner to dispose of the reserved goods and to collect the resigned claims lapses in the event
of non-observance of conditions of payment as well as in case of protests relating to bill and cheque. In such a case, BRABUS is
entitled to take possession of the reserved goods. The costs relating thereof shall be borne by the contractual partner. A rescission
of the contract is only given in the event of taking back the goods, if such a case is expressly declared by BRABUS. Upon request of
BRABUS, the contractual partner is, further, obliged to make available information and documents being needed by BRABUS to
assert the resigned claims.
7. In the event the value of securities of a debt being available to BRABUS exceed more than 10 % of its claims, BRABUS undertakes
to release at its option the exceeded securities upon request of the contractual partner.
L. Scrap parts
Parts being removed from vehicles (original or scrap parts) shall be taken over by the contractual partner within a time limit of 4 weeks.
After this period of time, BRABUS does not take responsibility for the storage. A replacement is excluded. This provision does not apply
for parts, which have been set off or passed into the ownership of BRABUS in other way.
N. Personal data
BRABUS is entitled to record and to process personal data of the contractual partner through
electronic data processing.
O. Ineffectiveness
The ineffectiveness of single conditions does not affect neither the validity of the contract nor the validity of the remaining conditions.
W 164-444-02_ml-klasse_11_2009_e_92976
Official technology-partners
Member of