Samsung SCD23-SEA PDF
Samsung SCD23-SEA PDF
5/12/03 9:46 AM
Page 101
ENGLISH
Auto Focus
BLC
FAD
REC
RCH
DEL
ETE
FW D
REV
Y
RDER
LENS 10XZOOM
EAS
SEA
S SHO
EAS
MS
UN
A
GC
MCO
AF
CCD
LCD
SA
US PATENT 4415844
ELECTRONICS
00616B SCD23/D24-SAFETY
5/12/03 9:49 AM
Page 100
ENGLISH
1. READ INSTRUCTIONS:
All the safety and operating instructions should be read
before the CAMCORDER is operated.
2. RETAIN INSTRUCTIONS:
The safety and operating instructions should be retained for
future reference.
3. HEED WARNINGS:
All warnings on the CAMCORDER and in the operatinginstructions
should be adhered to.
4. FOLLOW INSTRUCTIONS:
All operating and maintenance instructions should be followed.
5. CLEANING:
Unplug this CAMCORDER from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners.
Use a dry cloth used for dusting cabinets.
6. ATTACHMENTS:
Do not use attachments not recommended by the CAMCORDER
product manufacturer as they may be hazardous.
00616B SCD23/D24-SAFETY
5/12/03 9:49 AM
Page 101
ENGLISH
VENTILATION:
Slots and openings in the cabinet are provided for ventilation to
ensure reliable operation of the CAMCORDER and to protect it
from overheating. These openings must not be blocked or
covered. Never place your CAMCORDER on a bed, sofa, rug,
or other similar surface: on or near a radiator or heat register.
This CAMCORDER should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided
or the manufacturers instructions have been adhered to.
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
00616B SCD23/D24-SAFETY
5/12/03 9:49 AM
Page 102
ENGLISH
00616B SCD23/D24-SAFETY
5/12/03 9:49 AM
Page 103
ENGLISH
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 2
ENGLISH
Contents
Notes and Safety Instructions .............................................................................................................................. 6
Getting to Know Your Camcorder ...................................................................................................................... 11
Features ...................................................................................................................................................................................................................................
Accessories Supplied with camcorder ....................................................................................................................................................................................
Front & Left View .....................................................................................................................................................................................................................
Left side View ...........................................................................................................................................................................................................................
Right & Top View .....................................................................................................................................................................................................................
Rear & Bottom View ................................................................................................................................................................................................................
Remote control (SCD24 only) .................................................................................................................................................................................................
OSD (On Screen Display in CAMERA and PLAYER modes) ................................................................................................................................................
OSD (On Screen Display in M.REC and M.PLAY modes) .....................................................................................................................................................
Turning the OSD on/off (On Screen Display) ...................................................................................................................................................................
11
12
13
14
15
16
17
18
19
19
Preparation ......................................................................................................................................................... 20
How to use the Remote Control (SCD24 only) ....................................................................................................................................................................... 20
Battery Installation for the Remote Control ....................................................................................................................................................................... 20
Self Record using the Remote Control ............................................................................................................................................................................. 20
Lithium Battery Installation......................................................................................................................................................................................................... 21
Adjusting the Hand Strap ....................................................................................................................................................................................................... 22
Hand strap ......................................................................................................................................................................................................................... 22
Shoulder strap...................................................................................................................................................................................................................... 22
Connecting a Power Source ................................................................................................................................................................................................... 23
To use the AC Power adapter and DC Cable .................................................................................................................................................................. 23
To select the CAMCORDER mode ..................................................................................................................................................................................... 23
Using the Lithium Ion Battery Pack ......................................................................................................................................................................................... 24
Charging the Lithium Ion Battery Pack ............................................................................................................................................................................. 24
Table of continuous recording time based on model and
battery type ....................................................................................................................................................................................................................... 25
Battery level display ........................................................................................................................................................................................................... 26
Inserting and Ejecting a Cassette .......................................................................................................................................................................................... 27
28
29
30
30
30
31
32
32
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 3
ENGLISH
Contents
Playing back a tape you have recorded on the LCD .............................................................................................................................................. 33
Adjusting the LCD during PLAY ......................................................................................................................................................................... 34
Controlling Sound from the Speaker ...................................................................................................................................................................... 34
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 4
ENGLISH
Contents
PHOTO Image Recording ........................................................................................................................................................................................ 63
Searching for a PHOTO picture ......................................................................................................................................................................... 63
NITE PIX (0 lux recording) .........................................................................................................................................................................................64
POWER NITE PIX......................................................................................................................................................................................................65
Using the VIDEO LIGHT ............................................................................................................................................................................................66
Various Recording Techniques ................................................................................................................................................................................ 67
Playback ............................................................................................................................................................. 68
Tape Playback .......................................................................................................................................................................................................... 68
Playback on the LCD .......................................................................................................................................................................................... 68
Playback on a TV monitor .................................................................................................................................................................................. 68
Connecting to a TV which has Audio Video input jacks .................................................................................................................................... 68
Connecting to a TV which has no Audio and Video input jacks ........................................................................................................................ 69
Playback ............................................................................................................................................................................................................. 69
Various Functions while in PLAYER mode .............................................................................................................................................................. 70
Playback pause .................................................................................................................................................................................................. 70
Picture search (Forward/Reverse) ..................................................................................................................................................................... 70
Slow playback (Forward/Reverse)(SCD24 only) ............................................................................................................................................... 70
Frame advance (To play back frame by frame)(SCD24 only) ........................................................................................................................... 71
X2 Playback (Forward/Reverse )(SCD24 only) ................................................................................................................................................. 71
ZERO MEMORY(SCD24 only) ............................................................................................................................................................................... 72
PB DSE (Playback Digital Special Effects) ............................................................................................................................................................ 73
PB ZOOM ................................................................................................................................................................................................................ 74
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 5
ENGLISH
Contents
Image Format ..................................................................................................................................................................................................... 82
Selecting the CAMCORDER mode ......................................................................................................................................................................... 82
Selecting the image quality ...................................................................................................................................................................................... 83
Select the image quality .................................................................................................................................................................................... 83
Number of images on the Memory Stick ........................................................................................................................................................... 83
Recording Still images to a Memory Stick in M.REC Mode ................................................................................................................................... 84
Recording images to a Memory Stick .................................................................................................................................................................84
Recording an image from a cassette as a still image ...................................................................................................................................... 85
Viewing Still images ................................................................................................................................................................................................. 86
To view a Single image........................................................................................................................................................................................ 86
To view a slide show............................................................................................................................................................................................ 86
To view the Multi Screen ......................................................................................................................................................................................87
Copying still images from a cassette to Memory Stick ............................................................................................................................................ 88
Marking images for printing ...................................................................................................................................................................................... 89
Protection from accidental erasure ........................................................................................................................................................................... 90
Deleting Still images ................................................................................................................................................................................................. 91
Formatting the Memory Stick.................................................................................................................................................................................... 92
Attention ............................................................................................................................................................................................................... 92
MPEG REC ................................................................................................................................................................................................................93
MPEG PB ...................................................................................................................................................................................................................94
Maintenance ....................................................................................................................................................... 95
After finishing a recording ........................................................................................................................................................................................ 95
Cleaning and Maintaining the Camcorder ................................................................................................................................................................ 96
Cleaning the Video Heads ................................................................................................................................................................................. 96
Using Your Camcorder Abroad ................................................................................................................................................................................ 97
Power sources .................................................................................................................................................................................................... 97
Color system ....................................................................................................................................................................................................... 97
Troubleshooting................................................................................................................................................... 98
Troubleshooting ........................................................................................................................................................................................................ 98
Self Diagnosis Display ........................................................................................................................................................................................ 98
Moisture Condensation ....................................................................................................................................................................................... 98
Self Diagnosis Display in M.REC, M.PLAY mode ............................................................................................................................................. 99
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 6
ENGLISH
1
MULTI
2
PB
ZO
OM
DISPLAY
PB
ZO
OM
DISPLAY
T
IGH
V.L
T
IGH
V.L
DISPLAY
PB
ZO
OM
T
IGH
V.L
DISPLAY
T
IGH
V.L
PB
ZO
OM
DISPLAY
PB
ZO
OM
T
IGH
V.L
DISPLAY
T
IGH
V.L
3
PB
ZO
OM
PB
ZO
OM
T
IGH
V.L
DISPLAY
MULTI
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 7
ENGLISH
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 8
ENGLISH
DISPLAY
T
IGH
V.L
- Make sure that the battery pack is fully charged before starting to record.
- To preserve battery power, keep your camcorder turned off when you are not
operating it.
- If your camcorder is in CAMERA mode,
and it is left in STBY mode without being operated for more than 5 minutes
with a tape installed, it will automatically turn itself off to protect against
unnecessary battery discharge.
- Make sure that the battery pack is fitted firmly into place.
Dropping the battery pack may damage it.
- A brand new battery pack is not charged.
Before using the battery pack, you need to charge it completely.
- It is a good idea to use the viewfinder rather than the LCD when making long
recordings, because the LCD uses up more battery power.
PB
ZO
OM
* When the battery reaches the end of its life, please contact your local dealer.
The batteries have to be dealt with as chemical waste.
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 9
ENGLISH
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 10
ENGLISH
10
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 11
ENGLISH
11
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 12
ENGLISH
3. AC cord
(AD39-00076A)
2. AC Power Adapter
3. AC Cord
4. AUDIO/VIDEO cable
5. Instruction Book
4. AUDIO/VIDEO cable
(AD39-00001A)
5. Instruction Book
6. Lithium battery
(AD43-10130H)
7. Shoulder strap
(AD63-00202B)
8. USB cable
(AD39-00073A)
9. Software CD
DA
TIMTE/
E
SLO
W
ZER
ME
MO O
RY
A.D
UB
F.A
DV
STA
STORT/
P
SE
TIM LF
ER
PH
SE OTO
AR
CH
PH
OT
O
DIS
X2
PLA
11.Memory Stick
(SCD24 only)
12
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 13
ENGLISH
5. Viewfinder
1. Internal MIC
BL C
FA DE
RE C
SE AR
CH
OW
S SH
EA SY
FW D
RE V
RDER
UN
A
GC
MCO
2. Lens
6. EASY button
LENS 10XZOOM
MU LT
SA
3. Video Light
4. Remote sensor
8. IR(Infrared) Light
1. Internal MIC
2. Lens
5. Viewfinder
(see page 32)
3. Video Light
6. EASY button
(see page 57)
4. Remote sensor
13
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 14
ENGLISH
MULTI
MUL
TI
T
IGH
V.L
DISPLAY
PB
ZO
OM
2. PB zoom
3. Display
4. V. light
5. Mode switch
10. Speaker
9. MENU/VOL/MF dial
8. ENTER button
6. DV jack
1. Function buttons
PLAYER
-
14
CAMERA
EASY
M.PLAY
MULTI
: (REW)
REC SEARCH
REV
: (FF)
REC SEARCH +
FWD
: (PLAY/STILL)
FADE
SLIDE SHOW
: (STOP)
BLC
7. DC jack
2. PB zoom
3. Display
4. V. light
5. Mode switch (TAPE/MEMORY STICK)
6. DV jack
7. DC jack
8. ENTER button
9. MENU/VOL/MF dial
10. Speaker
11. MENU button
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 15
ENGLISH
1. Zoom lever
2. PHOTO button
9. USB jack
8. S-VIDEO jack
7. Audio/Video jack
6. External MIC in
5. Hook for handstrap
3. START/STOP button
4. Power switch
1. Zoom lever
7. Audio/Video jack
2. PHOTO button
(see page 63)
8. S-VIDEO jack
3. START/STOP button
4. Power switch (CAMERA or PLAYER)
9. USB jack
10. NITE PIX switch
11. Slow shutter
15
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 16
ENGLISH
ERA
AM
ER
OFF C
7. Tripod receptacle
2. Battery Release
PLAY
CHARGE
16
5. TAPE OPEN/EJECT
1. Charging indicator
5. TAPE OPEN/EJECT
2. Battery Release
7. Tripod receptacle
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 17
ENGLISH
1. PHOTO
2. START/STOP
3. SELF TIMER
4. ZERO MEMORY
5. PHOTO SEARCH
6. A.DUB
7.
(FF)
8.
(REW)
9.
(PLAY)
17. Zoom
16. X2
15. DATE/TIME
14.
(SLOW)
13. (STILL)
12. (STOP)
11. F. ADV
10. Direction
1. PHOTO
10. Direction (
2. START/STOP
3. SELF TIMER
(see page 20)
12.
(STOP)
13.
(STILL)
4. ZERO MEMORY
(see page 72)
14.
(SLOW)
5. PHOTO Search
15. DATE/TIME
7.
(FF)
17. Zoom
8.
(REW)
18. Display
9.
(PLAY)
17
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 18
ENGLISH
18
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
20
19
REC
M-0:00:00
EASY
MIRROR
5 5 min
BLC
TAPE !
1 6 bit
MF
SHUTTER
EXPOSURE
NITE PIX
18
17
16
28
15
14
13
12
1 0 : 0 0 AM
J A N. 1 0 , 2 0 0 3
32
11
10
ZOOM
9
8
EXPOSURE
SHUTTER
SOUND [ 2 ]
PB ZOOM
1.2x
MIRROR
20
19
M-0:00:00
5 5 min
1 6 bit
DV
1 0 : 0 0 AM
30
JAN.10,2003
ENTER :
VOL.
27
...C
[11]
24
11
28
26
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 19
ENGLISH
SF 2 2 / 2 4 0
320
B
I
12:00AM
JAN.10.2003
G
001
SLIDE
22/240
MEMORY STICK !
1 0 : 0 0 AM
100-0001
J A N. 1 0 , 2 0 0 3
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 20
UN
A
GC
MCO
RDER
LENS 10XZOOM
ENGLISH
MS
Preparation
SA
20
Self
Timer
PHOTO
SELF
TIMER
ZERO
MEMORY
PHOTO
SEARCH
A.DUB
F.ADV
DISPLAY
DATE/
TIME
SLOW
X2
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 21
ENGLISH
Preparation
Lithium Battery Installation
The lithium battery maintains the clock function and preset contents of the memory;
even if the battery pack or AC power adapter is removed.
The lithium battery for the camcorder lasts about 6 months under normal operation from the time of installation.
When the lithium battery becomes weak or dead, the date/time indicator flashes for about 5 seconds
when you set the power switch to CAMERA.
When this occurs, replace the lithium battery with CR2025 type.
Note
Warning: Keep the LITHIUM BATTERY out of the reach of the children.
Should any battery be swallowed, consult a doctor immediately.
21
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 22
ENGLISH
Preparation
Adjusting the Hand Strap
It is very important to ensure that the Hand strap has been correctly adjusted before you begin your recording.
The hand strap enables you to :
- Hold the camcorder in a stable, comfortable position.
- Press the Zoom and START/STOP button without having to change the position of your hand.
Hand strap
a. Pull open the Hand Strap cover and release the Hand Strap.
b. Adjust its length and stick it back onto
the Hand Strap cover.
c. Close the Hand Strap cover again.
Shoulder Strap
The Shoulder Strap enables you to carry your camcorder around
in complete safety.
1. Insert the end of strap into the Shoulder Strap hook on the camcorder.
Insert the other end of strap into
ring inside hand strap.
2. Thread each end into the buckle, adjust the length of
the strap and then pull it tight in the buckle.
22
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 23
ENGLISH
Preparation
Connecting a Power Source
There are two types of power source that can be connected to your camcorder.
- The AC Power Adapter and AC cord : used for indoor recording.
- The Battery Pack : used for outdoor recording.
To use the AC Power adapter and DC Cable
1. Connect the AC Power adapter to the AC cord.
MULTI
23
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 24
ENGLISH
Preparation
Using the Lithium Ion Battery Pack
MULTI
Charging rate
Less than 50%
50% ~ 75%
75% ~ 90%
90 ~ 100%
Error - Reset the battery pack and
the DC cable
Notes
24
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 25
ENGLISH
Preparation
Using the Lithium Ion Battery Pack
Table of continuous recording time based on model and battery type.
If you close the LCD screen, it switches off and the viewfinder switches on automatically.
The continuous recording times given in the table above are approximations.
Actual recording time depends on usage.
Time
Battery
Charging
time
VIEWFINDER ON
SB-L110
Approx.
2hr
Approx.
1hr 30min
Approx.
2hr
SB-L220
Approx.
3hr 30min
Approx.
3hr 10min
Approx.
4hr 10min
Notes
The battery pack should be recharged in an environment of between 32F (0C) and 104F (40C).
The battery pack should never be charged in a room temperature that is below 32F (0C).
The life and capacity of the battery pack will be reduced if it is used in temperatures below 32F (0C)
or left in temperatures above 104F (40C) for a long period, even when it is fully recharged.
Do not put the battery pack near any heat source (fire or flames, for example).
Do not disassemble, process, pressure, or heat the Battery Pack.
Do not allow the + and - terminals of the battery pack to be short-circuited.
It may cause leakage, heat generation, induce fire and overheating.
25
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 26
ENGLISH
Preparation
Battery level display
The battery level display indicates the amount of power remaining
in the battery pack.
a.
b.
c.
d.
e.
Fully charged
20~40% used
40~80% used
80~95% used
Completely used (flickers)
(The camcorder will turn off soon, change the battery as soon as possible)
a
b
c
d
e
Please refer to the table on page 25 for approximate continuous recording times.
The recording time is affected by environmental temperature and conditions.
The recording time becomes very short in a cold environment.
The continuous recording times in the operating instructions are measured using a fully charged battery pack
at 77F(25C).
As the environmental temperature and conditions may differ when you actually use the camcorder,
the remaining battery time may not be the same as the approximate continuous recording times
given in these instructions.
Tips for Battery Identification
A charge mark is provided on the battery pack to help you remember
whether it has been charged or not.
Two colors are provided (red and grey)-you may choose which one indicates
charged and which indicates discharged.
26
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 27
ENGLISH
Preparation
Inserting and Ejecting a Cassette
When inserting a tape or closing a cassette holder, do not apply excessive force.
This may cause a malfunction.
Do not use any tapes other than Mini DV cassettes.
1
2
DO NOT PUSH IN THE COMPARTMENT
3
DO NOT PUSH IN THE COMPARTMENT
push
Note
When you have recorded something that you wish to keep, you can protect it
so that it will not be accidentally erased.
a. Protecting a tape :
Push the safety tab on the cassette so that the hole is uncovered.
b. Removing the tape protection :
If you no longer wish to keep the recording on the cassette,
push the write-protect tab back so that it covers the hole.
How to keep a tape
a. Avoid places with magnets or magnetic interference.
b. Avoid humidity and dust prone places.
c. Keep the tape in an upright position and avoid storing it in direct sunlight.
d. Avoid dropping or knocking your tapes.
a. SAVE
b. REC
27
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 28
ENGLISH
Basic Recording
Making your First Recording
1. Connect a Power source to the camcorder. (see page 23)
(A battery pack or a AC power adapter)
Insert a cassette. (see page 27)
2. Remove the LENS CAP and hook it onto the hand strap.
3. Set the power switch to the CAMERA position.
Open the LCD monitor.
Set the mode switch to the TAPE position.
Make sure that STBY is displayed.
If the protection tab of the cassette is open, STOP and
PROTECTION! will be displayed.
Make sure the image you want to record appears in
the LCD monitor or viewfinder.
Make sure the battery level indicates that there is
enough remaining power for your expected recording time.
4. To start recording, press the START/STOP button.
REC is displayed in the LCD.
To stop recording, press the START/STOP button again.
STBY is displayed in the LCD.
28
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 29
ENGLISH
Basic Recording
When a cassette is loaded and the camcorder is left in the STBY mode for more than 5 minutes without being used,
it will switch off automatically.
To use it again, push the START/STOP button or set the Power switch to OFF and then back to CAMERA.
This Auto Power off feature is designed to save battery power.
29
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 30
ENGLISH
Basic Recording
Hints for Stable Image Recording
30
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 31
ENGLISH
Basic Recording
Adjusting the LCD
Your camcorder is equipped with a 2.5 inch color Liquid Crystal Display(LCD) screen, which enables you to view
what you are recording or playing back directly.
Depending on the conditions under which you are using the camcorder (indoors or outdoors for example),
you can adjust ;
BRIGHT SELECT
BRIGHT ADJUST
COLOR ADJUST
1. Set the POWER switch to CAMERA position.
In the PLAYER mode, you may only setup the LCD
while the tape is playing.
2. Open the LCD screen, and the LCD switches on.
3. Press the MENU button.
4. Turn the MENU DIAL so that VIEWER is highlighted and
then press the ENTER button.
CAM MODE
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
LCD ADJUST
DATE/TIME
TV DISPLAY
CAM MODE
VIEWER SET
7. Turn the MENU DIAL so that it highlights the menu item you want to
adjust (BRIGHT SELECT, BRIGHT ADJUST, COLOR ADJUST).
LCD ADJUST
BRIGHT SELECT . . . . NORMAL
BRIGHT ADJUST . . . . . .[ 1 8 ]
COLOR ADJUST . . . . . . [ 1 8 ]
31
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 32
ENGLISH
Basic Recording
8. Press the ENTER button again.
You may select NORMAL or SUPER in the BRIGHT SELECT feature and press the ENTER button
to save the setting.
Use the MENU DIAL to adjust the value of BRIGHT ADJUST and COLOR ADJUST.
You can set values for BRIGHT ADJUST between 00 ~ 35 and COLOR ADJUST between 00 ~ 35.
9. Press the MENU button to finish the setting.
32
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 33
ENGLISH
Basic Recording
Playing back a tape you have recorded on the LCD
You can monitor the playback picture on the LCD monitor.
Make sure that the battery pack is in place.
1. Hold down the power switch tab and turn it to the PLAYER position.
You can also view the picture on a TV screen, after connecting the camcorder to a TV or VCR. (see page 68)
Various functions are available in playback mode. (see page 70)
33
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 34
ENGLISH
Basic Recording
Adjusting the LCD during PLAY
You can adjust the LCD during playback.
The adjustment method is the same procedure as used in CAMERA mode. (see page 31)
When you use the LCD screen for playback, you can hear the recorded sound from
the built-in Speaker.
- Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.
- Take the following steps to lower the volume or mute the sound while playing a tape
on the camcorder.
3. When you hear sounds once the tape is in play, use the MENU DIAL to adjust the volume.
A volume level display will appear on the LCD.
Levels may be adjusted from anywhere between 00 to 19 and you will not hear
any sound when the volume is set on 00.
If you close the LCD while playing, you will not hear sound from the speaker.
VOL / MF
<3-2>
0:23:47
5 5 min
Notes
34
When the cable is connected to the A/V jack, you cannot hear sound from the camcorder
speaker and cannot adjust the volume.
You can hear sound from camcorder speaker by removing the connected cable
from the A/V jack
VOL.
[11]
1 0 : 0 0 AM
JAN.10,2003
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 35
ENGLISH
Advanced Recording
Use of various Functions
Setting menu items
Available mode
MENU
INITIAL
CAMERA
A/V
MEMORY
VIEWER
SUB MENU
CLOCK SET
WL. REMOTE
DEMO
PROGRAM AE
WHT. BALANCE
D. ZOOM
DIS
DSE SELECT
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
AUDIO SELECT
WIND CUT
PB DSE
M.PLAY SELECT
PHOTO QUALITY
MPEG4 SIZE
PRINT MARK
PROTECT
FILE NO
DELETE
FORMAT
LCD ADJUST
DATE/TIME
TV DISPLAY
CAMERA
PLAYER
Memory
REC .
Memory
PLAY
Set the camcorder to CAMERA or PLAYER mode and M.REC or M.PLAY mode
1. Press the MENU button.
The MENU OSD is displayed. The cursor ( HIGHLIGHT ) indicates the feature you are currently adjusting.
2. Use the MENU DIAL and press the ENTER button on the left side panel to select and activate the item.
3. You can exit the menu mode by pressing the MENU button.
35
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 36
ENGLISH
Advanced Recording
Operating
Mode
Requested
Mode
Digital functions
DIS
DIS
D.ZOOM
PHOTO
SLOW SHUTTER
D.ZOOM
PHOTO
(TAPE)
O
O
SLOW
SHUTTER
NITE PIX
Digital
special
effects
NITE PIX
36
When a menu item on the LCD is marked with an X , that item cannot be activated.
When you select an item that cannot be changed, an error message will be displayed.
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 37
ENGLISH
Advanced Recording
CLOCK SET
CLOCK setup works in CAMERA, PLAYER, M.REC and M.PLAY modes.
The DATE/TIME is automatically recorded onto a tape.
Before recording, please set the DATE/TIME.
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
CLOCK SET
WL. REMOTE
DEMO
3. Use the MENU DIAL to select CLOCK SET from the submenu.
4. Press the ENTER button to enter SETTING mode.
A blinking item indicates the item to be changed.
The year will blink first.
5. Using the MENU DIAL, change the year setting.
6. Press the ENTER button.
The month will blink.
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
DEMONSTRATION
SET TIME!
CAM MODE
INITIAL SET
CLOCK SET
1 0 : 0 0 AM
J A N. 1 0 , 2 0 0 3
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 38
ENGLISH
Advanced Recording
REMOCON (SCD24 only)
The REMOCON function works in CAMERA, PLAYER, M.REC, M.PLAY modes.
The REMOCON option allows you to enable or disable the remote control for use with the camcorder.
1. Press the MENU button.
The menu list will appear.
2. Turn the MENU DIAL to highlight INITIAL and
press the ENTER button.
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
CLOCK SET
WL. REMOTE
DEMO
38
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
DEMONSTRATION
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 39
ENGLISH
Advanced Recording
DEMONSTRATION
Demonstration automatically shows you the major functions that are included with
your camcorder so that you may use them more easily.
The DEMONSTRATION function may only be used in the CAMERA mode without
a tape inserted in the camcorder.
The demonstration operates repeatedly until the DEMONSTRATION mode switched OFF.
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
CLOCK SET
WL. REMOTE
DEMO
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
DEMONSTRATION
Notes
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 40
ENGLISH
Advanced Recording
PROGRAM AE
The PROGRAM AE function works in CAMERA only.
The PROGRAM AE mode allows you to adjust shutter speeds and apertures to suit different recording
conditions.
They give you creative control over the depth of field.
AUTO mode
)
- For recording people or objects moving quickly.
PORTRAIT mode (
)
- For focusing on the background of the subject, when the background is out of focus.
- The PORTRAIT mode is most effective when used outdoors.
- The shutter speed automatically varies from 1/60 to 1/1000 per second.
SPOTLIGHT mode (
)
- For recording correctly when there is only light on the subject and not the rest of the picture.
SAND/SNOW mode (
)
- For recording when people or objects are darker than the background because of reflected light
from sand or snow.
)
- For recording fast-moving subjects such as players in golf or tennis games.
40
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 41
ENGLISH
Advanced Recording
Setting the PROGRAM AE
1. Press the MENU button.
The menu list will appear.
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
PROGRAM AE
WHT. BALANCE
D.ZOOM
DIS
DSE SELECT
CAM MODE
CAMERA SET
PROGRAM AE
WHT. BALANCE
D.ZOOM
DIS
DSE SELECT
CAM MODE
CAMERA SET
PROGRAM AE
AUTO
SPORTS
PORTRAIT
SPOTLIGHT
SAND / SNOW
HIGH S. SPEED
Notes
41
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 42
ENGLISH
Advanced Recording
WHT. BALANCE (WHITE BALANCE)
The WHITE BALANCE function works in CAMERA or M.REC mode only.
The WHITE BALANCE is a recording function that preserves the unique color of the object in any recording
condition.
You may select the appropriate WHITE BALANCE mode to obtain good quality color of the image.
AUTO ( ) : This mode is generally used to control the WHITE BALANCE automatically.
HOLD ( ) :This fixes the current WHITE BALANCE value.
INDOOR ( ) : This controls the WHITE BALANCE according to the indoor ambience.
OUTDOOR ( ) : This controls the WHITE BALANCE according to the outdoor ambience.
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
PROGRAM AE
WHT. BALANCE
D.ZOOM
DIS
DSE SELECT
CAM MODE
CAMERA SET
PROGRAM AE
WHT. BALANCE
D.ZOOM
DIS
DSE SELECT
Notes
CAM MODE
42
While setting the NITE PIX to ON, the WHT.BALANCE function does not work.
The WHT.BALANCE function will not operate
in EASY mode.
Turn the digital zoom off (if necessary) to set a more accurate white balance.
If you have set the white balance and lighting conditions changes, reset the white balance.
During normal outdoor recording, setting to AUTO may provide better results.
CAMERA SET
WHT. BALANCE
AUTO
HOLD
INDOOR
OUTDOOR
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 43
ENGLISH
Advanced Recording
Zooming In and Out with DIGITAL ZOOM
Zoom works in CAMERA mode only.
Zooming In and Out
Zooming is a recording technique that lets you change the size of the subject in a scene.
For more professional looking recordings, do not use the zoom function too often.
You can zoom using variable zoom speeds.
Use these features for different shots. Please note that
over-use of the zoom feature can lead to unprofessional looking results and a reduction of battery usage time.
1. Move the zoom lever slightly for a gradual zoom,
move it further for a high-speed zoom.
Your zooming is monitored on the OSD.
1-1
1-2
2. T(Telephoto) side:
Subject appears closer.
TELE
Note
You can record a subject that is a minimum of 1 m (about 2.65 feet) away from the lens surface in the TELE position,
or about 10 mm (about 0.5 inch) away in the WIDE position.
43
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 44
ENGLISH
Advanced Recording
Digital Zoom
Zooming more than 10x is achieved digitally.
The picture quality may deteriorate depending on how much you zoom in on the subject.
We recommend that you use the DIS feature with DIGITAL ZOOM for picture stability. (see page 45)
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
PROGRAM AE
WHT. BALANCE
D.ZOOM
DIS
DSE SELECT
3. Turn the MENU DIAL to CAMERA and press the ENTER button.
4. Select D.ZOOM from the submenu.
CAM MODE
5. Press the ENTER button to setup the 100x, 200x, 400x, 800x digital zoom function or
to turn the feature OFF.
6. To exit, press the MENU button.
CAMERA SET
PROGRAM AE
WHT. BALANCE
D.ZOOM
DIS
DSE SELECT
CAM MODE
CAMERA SET
D . ZOOM
OFF
100x
200x
400x
800x
44
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 45
ENGLISH
Advanced Recording
DIS (Digital Image Stabilizer)
The DIS function works in CAMERA mode only.
DIS (Digital Image Stabilizer) is a function that compensates for any shaking or
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
PROGRAM AE
WHT. BALANCE
D.ZOOM
DIS
DSE SELECT
3. Turn the MENU DIAL highlight to CAMERA and press the ENTER button.
The sub menu list will appear.
4. Turn the MENU DIAL to activate the DIS function, press the ENTER button.
The DIS menu is changed to ON.
If you do not want to use the DIS function,
set the DIS menu to OFF.
5. To exit, press the MENU button.
CAM MODE
CAMERA SET
PROGRAM AE
WHT. BALANCE
D.ZOOM
DIS
DSE SELECT
Notes
It is recommended that you deactivate the shake compensation function when using a tripod.
If you use the DIS function, the picture quality may deteriorate
45
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 46
ENGLISH
Advanced Recording
DSE(Digital Special Effects) SELECT
The DSE function works in CAMERA mode only.
The digital effects enable you to give a creative look to your recording by adding various special effects.
Select the appropriate digital effect for the type of picture that you wish to record and the effect you
wish to create.
There are 9 DSE modes.
a. ART mode
This mode gives the images a coarse effect.
b. MOSAIC mode
This mode gives the images a mosaic effect.
c. SEPIA mode
This mode gives the images a reddish-brown pigment.
d. NEGA mode
This mode reverses the colors of the images, creating a negative image.
e. MIRROR mode
This mode cuts the picture in half,
using a mirror effect.
f. BLK & WHT mode
This mode changes the images to black and white.
g. EMBOSS mode
This mode creates a 3D effect (embossing).
h. CINEMA mode
This mode covers the upper/lower portions of the screen to give a cinematic effect.
i. MAKE - UP mode
This mode allows the images to be selected in red, green, blue or yellow colors.
46
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 47
ENGLISH
Advanced Recording
Selecting an effect
1. Set the camcorder to CAMERA mode.
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
PROGRAM AE
WHT. BALANCE
D.ZOOM
DIS
DSE SELECT
3. Turn the MENU DIAL to highlight CAMERA and press the ENTER button.
4. Select DSE SELECT from the submenu.
CAM MODE
CAMERA SET
PROGRAM AE
WHT. BALANCE
D.ZOOM
DIS
DSE SELECT
Notes
While setting the NITE PIX to ON, the DSE function does not work.
The DSE function will not operate in EASY mode.
OFF
ART
MOSAIC
SEPIA
NEGA
MIRROR
BLK&WHT
47
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 48
ENGLISH
Advanced Recording
REC MODE
The REC MODE function works in both CAMERA and
SP (standard play): This mode permits 60 minutes of recording time with a DVM60 tape.
LP (long play): This mode permits 90 minutes of recording time with a DVM60 tape.
48
We recommend that you use this camcorder to play back any tapes recorded on
this camcorder.
Playing back a tape recorded in other equipment may produce mosaic shaped
distortion.
When you record a tape in SP and LP modes, or LP mode only, the playback
picture may be distorted or the time code
may not be written properly between scenes.
Record using SP mode for best picture and sound quality.
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
REC MODE
PHOTO SEARCH
COPY
AUDIO MODE
12
AUDIO SELECT
WIND CUT
PB DSE
CAM MODE
A / V SET
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
AUDIO SELECT
WIND CUT
PB DSE
12
SOUND[1]
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 49
ENGLISH
Advanced Recording
AUDIO MODE
The AUDIO MODE function works in CAMERA mode.
This camcorder records sound in two ways. (12bit, 16bit)
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
3. Turn the MENU DIAL to highlight A/V and press the ENTER button.
4. Select the AUDIO MODE from the menu and press the ENTER button.
The AUDIO MODE toggles between 12bit-16bit with each push.
5. To exit, press the MENU button.
REC MODE
PHOTO SEARCH
COPY
AUDIO MODE
12
AUDIO SELECT
WIND CUT
PB DSE
CAM MODE
A / V SET
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
AUDIO SELECT
WIND CUT
PB DSE
12
SOUND[1]
49
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 50
ENGLISH
Advanced Recording
WIND CUT
The WIND CUT function works in CAMERA and PLAYER (SCD24 only) modes.
The WIND CUT function minimizes wind noise or other noise while recording.
- When the wind cut is on, some low sounds are eliminated along with the sound of the wind.
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
The menu list will appear.
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
3. Turn the MENU DIAL to highlight A/V and press the ENTER button.
REC MODE
PHOTO SEARCH
COPY
AUDIO MODE
12
AUDIO SELECT
WIND CUT
PB DSE
5. This feature toggles ON/OFF each time you press the ENTER button.
6. To exit, press the MENU button.
Notes
50
Make sure WIND CUT is set to off when you want the microphone to be as sensitive as possible.
Use the WIND CUT when recording in windy places such as the beach or near buildings.
A / V SET
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
AUDIO SELECT
WIND CUT
PB DSE
12
SOUND[1]
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 51
ENGLISH
Advanced Recording
DATE/TIME
The DATE/TIME function works in CAMERA, PLAYER, M.REC and M.PLAY modes.
The date and time are automatically recorded on a special data area of the tape.
1. Press the MENU button.
The menu list will appear.
2. Turn the MENU DIAL to highlight VIEWER and press the ENTER button.
3. Turn the MENU DIAL to highlight DATE/TIME.
4. Press the ENTER button to select the sub-menu.
5. Using the MENU DIAL, select the DATE/TIME mode.
You can choose to display - the OFF, DATE, TIME, DATE/TIME
- OFF only
- DATE only
- TIME only
- DATE & TIME
To return to the previous menu, highlight the DATE/TIME in the middle of the and
press the ENTER button.
6. To exit, press the MENU button.
Notes
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
VIEWER SET
DATE / TIME
DATE
TIME
DATE&TIME
51
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 52
ENGLISH
Advanced Recording
TV DISPLAY
The TV DISPLAY function works in CAMERA, PLAYER, M.REC and M.PLAY modes.
You can select the output path of the OSD (On Screen Display).
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
LCD ADJUST
DATE / TIME
TV DISPLAY
3. Turn the MENU DIAL to highlight VIEWER and press the ENTER button.
4. Select the TV DISPLAY mode in list,
press the ENTER button.
The DISPLAY mode switches between ON/OFF with each push.
5. To exit, press the MENU button.
52
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 53
ENGLISH
Advanced Recording
Using Quick Menu(Navigation Menu)
Quick menu is available only in CAMERA mode.
Quick menu is used to adjust camera functions by simply using the MENU DIAL.
This feature is useful for when you want to make simple adjustments without having to access the menus and submenus.
DATE/TIME
- Each time you select DATE/TIME and press the ENTER button, it will be displayed in the order of
DATE - TIME - DATE/TIME - OFF. (see page 51)
WL.REMOTE (
) (SCD24 only)
- Each time you select WL.REMOTE and press the ENTER button, the WL.REMOTE is switched to
either enabled (
) or disabled ( ) .
DIS (
)
- Each time you select DIS and press the ENTER button,
the DIS icon is displayed or set to OFF.
DSE (Digital Special Effect) (see page 46)
- Each time you select DSE and press the ENTER button,
the DSE preset values are applied or set to OFF.
DSE values will not switch between On and Off if they have not been preset in the menu.
PROGRAM AE (see page 40)
- Each time you select PROGRAM AE and press the ENTER button, you can choose between
the preset PROGRAM AE values and AUTO. You cant choose between Auto and the PROGRAM AE
values if the values have not been preset in the regular menu.
53
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 54
ENGLISH
Advanced Recording
WHT. BALANCE (see page 42)
- Each time you select WHT. BALANCE and press the ENTER button, you can choose between
preset WHT.BALANCE values and AUTO.
As in PROGRAM AE, you can't choose between Auto and WHT.BALANCE values it they have not been preset.
FOCUS (Manual Focus/Auto Focus) (see page 58)
- Each time you select FOCUS and press the ENTER button, the FOCUS is switched to either
Manual Focus (MF) or Auto Focus (
).
SHUTTER SPEED & EXPOSURE
- You can set values for SHUTTER SPEED and EXPOSURE by selecting (
For more information, see the next chapter.
DIS
STBY
DSE
MIRROR
0:00:00
PROGRAM AE
WHT. BALANCE
FOCUS
SHUTTTER
EXPOSURE
WL.REMOTE
(SCD24 only)
SHUTTER
EXPOSURE
1 0 : 0 0 AM
JAN.10,2003
54
DATE/TIME
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 55
ENGLISH
Advanced Recording
SHUTTER SPEED & EXPOSURE
You can set SHUTTER SPEED and EXPOSURE only in CAMERA mode.
SHUTTER SPEED and EXPOSURE values can only be set in the Quick Menu.
SHUTTER SPEED and EXPOSURE are automatically switched and/or deactivated.
Notes
If you want to use the selected shutter speed and exposure value, you should begin the recording with
the shutter speed and the exposure adjustment screens displayed on the LCD.
If you manually change the shutter speed and the exposure value when Auto-exposure option is selected,
manual changes are applied first.
55
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 56
ENGLISH
Advanced Recording
SLOW SHUTTER (Low Shutter Speed)
The SLOW SHUTTER function works in CAMERA mode only.
The shutter speed can be controlled, allowing you to record slow moving objects.
Notes
56
When using SLOW SHUTTER the image takes on a slow motion like effect.
The SLOW SHUTTER function will not operate with EASY.
00616B SCD23-SEA(28~57)
5/12/03 9:47 AM
Page 57
ENGLISH
Advanced Recording
EASY Mode (for Beginners)
The EASY mode allows a beginner to easily make good recordings.
RE
HO
SS
RDER
LENS 10XZOOM
2. By pressing the EASY button, all functions on the camera will be set to off and the recording
settings will be set to the following basic modes:
Battery level, recording mode, counter, DATE/TIME, and DIS (
) will be displayed.
The word EASY.Q will appear on the LCD at the same time.
However, the DATE/TIME will only be seen if it has been previously set. (see page 51)
FWD
REV
STBY
EASY
0:00:00
5 5 min
U
MS
NG
CA
MCO
EAS
SA
4. Pressing the EASY button again in the STBY mode and then turns the EASY mode off.
The EASY function will not turn off when you have recording.
The camera will return to the settings that were set prior to activating EASY mode.
1 0 : 0 0 AM
JAN.10,2003
Notes
In EASY mode, certain functions are not available, such as MENU, BLC, MF/AF.
- If you want to use these functions, you must first switch the EASY mode off.
The EASY mode settings are deleted when the battery pack is uninstalled from the camcorder
and therefore, they must be reset when a battery pack has been replaced.
57
00616B SCD23-SEA(59~103)
5/12/03 9:52 AM
Page 58
ENGLISH
Advanced Recording
MF/AF (Manual Focus/Auto Focus)
The MF/AF function works in CAMERA, M.REC mode only.
In most situations, it is better to use the automatic focus
Auto Focusing
If you are inexperienced in the use of camcorders, we recommend that you
58
VOL / MF
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 59
ENGLISH
Advanced Recording
BLC (Back Light Compensation)
BLC works in CAMERA/M.REC mode.
Back lighting exists when the subject is darker than the background:
* BLC off
* BLC on
Notes
59
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 60
ENGLISH
Advanced Recording
Fade In and Out
The FADE function works in CAMERA mode only.
You can give your recordings a professional look by using special effects such as fading in
FADE
3. When you wish to stop recording, hold down the FADE button.
The picture and sound gradually disappear (fade out).
4. When the picture has disappeared,
press the START/STOP button to stop recording.
a. FADE OUT
(Approx. 4 seconds)
FADE
a. FADE OUT
STBY
0:00:00
REC
0:00:15
REC
0:00:15
STBY
0:00:20
Gradual disappearance
b. FADE IN
(Approx. 4 seconds)
Gradual appearance
60
b. FADE IN
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 61
ENGLISH
Advanced Recording
Audio dubbing (SCD24 only)
Dubbing sound
1. Set the camcorder to PLAYER mode.
If you want to use an external microphone, connect the microphone
to the external MIC input jack on the camcorder.
2. Press the
(PLAY/STILL) button and
find the timeframe of the scene to be dubbed.
3. Press the
(PLAY/STILL) button to
pause the scene.
4. Press the A.DUB button on the
Remote Control.
A.DUB will be displayed on the LCD.
The camcorder is in a ready-to-dub
state for dubbing.
5. Press the
(PLAY/STILL) button to start dubbing.
Press the
(STOP) button to stop the dubbing.
61
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 62
ENGLISH
Advanced Recording
Dubbed audio Playback
1. Insert the dubbed tape and press MENU button.
PLAYER MODE
A / V SET
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
AUDIO SELECT
WIND CUT
PB DSE
4. Use the MENU DIAL to select AUDIO SELECT from the submenu.
PLAYER MODE
A / V SET
AUDIO SELECT
Note
When you playback added sound (SOUND2 or MIX mode), you may experience loss of sound quality.
62
SOUND [ 1 ]
SOUND [ 2 ]
MIX [ 1 + 2 ]
12
SOUND[1]
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 63
ENGLISH
Advanced Recording
PHOTO Image Recording
1. Press the PHOTO button and hold it.
The still picture appears on the LCD monitor.
If you do not wish to record, release the button.
2. Release the PHOTO button and press the PHOTO button again in 2 seconds.
The still picture is recorded for about 6~7 seconds.
3. After the PHOTO has been recorded, the camcorder returns to STBY mode.
1.
2.
3.
4.
5.
6.
INITIAL
CAMERA
A/V
MEMORY
VIEWER
REC MODE
PHOTO SEARCH
COPY
AUDIO MODE
12
AUDIO SELECT
WIND CUT
PB DSE
PLAYER MODE
A / V SET
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
AUDIO SELECT
WIND CUT
PB DSE
12
SOUND[1]
63
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 64
ENGLISH
Advanced Recording
NITE PIX (0 lux recording)
The NITE PIX function works in CAMERA/M.REC mode.
The NITE PIX function enables you to record a subject in darkness.
Notes
64
The maximum recording distance using the infrared light is about 3m (about 10 feet).
If you use the NITE PIX function in normal recording situations (ex. outdoors by day),
the recorded picture may be tinted green.
In the NITE PIX mode, certain functions are not available, such as White Balance, Program AE,
DSE, BLC.
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 65
ENGLISH
Advanced Recording
POWER NITE PIX
The POWER NITE PIX function works in CAMERA mode.
The POWER NITE PIX function can record a subject more brightly in darkness than the NITE PIX function.
A POWER NITE PIX is displayed for three seconds by LCD if you press a SLOW SHUTTER button in state that
Notes
The maximum recording distance using the infrared light is about 3 m (about 10 feet).
If you use the POWER NITE PIX function in normal recording situations (ex. outdoors by day),
the recorded picture may contain unnatural colors.
In the POWER NITE PIX mode, certain functions are not available, such as White Balance, Program AE, DSE, BLC.
When the subject is too bright, press the SLOW SHUTTER button (1/8 1/30) to obtain better quality recordings.
65
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 66
ENGLISH
Advanced Recording
Using the VIDEO LIGHT
VIDEO LIGHT works in CAMERA/M.REC mode only.
To brighten the scene when natural lighting is too dim.
VIDEO LIGHT works in SP mode only.
- If you turn on the LIGHT in LP mode, the LIGHT indicator and LP will be blinking on the LCD.
DANGER
PB
ZO
OM
DISPLAY
T
IGH
V.L
Notes
66
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 67
ENGLISH
Advanced Recording
Various Recording Techniques
In some situations different recording techniques may be required for more dramatic results.
Note
Please rotate the LCD screen carefully as excessive rotation may cause damage to the inside of the hinge
that connects the LCD screen to the Camcorder.
1. General recording.
2. Downward recording.
Making a recording with a top view of the LCD screen.
3. Upward recording.
Making a recording viewing the LCD screen from below.
4. Self recording.
Making a recording viewing the LCD screen from the front.
5. Recording with the Viewfinder.
In circumstances where it is difficult to use the LCD monitor,
the viewfinder can be used as a convenient alternative.
67
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 68
ENGLISH
Playback
Tape Playback
The playback function works in PLAYER mode only.
Playback on a TV monitor
To play back a tape, the television must have a compatible color system.
We recommend that you use the AC Power Adapter as the power source for the camcorder.
Audio input
(right)-Red
Camcorder
S-VIDEO input
BLC
S-VIDEO
FADE
H
REC
S SHOW
68
FWD
REV
RDER
MCO
A
GC
A/V
LENS 10XZOOM
MULTI
Notes
SEARC
EASY
UN
TV
Audio input
(left)-White
MS
Video inputYellow
SA
You may use the S-VIDEO cable to obtain better quality pictures if you have a S-VIDEO connector on your TV.
Even if you use a S-VIDEO cable, you need to connect an audio cable.
If you connect the cable to the A/V Jack, you will not hear sound from the camcorder speakers.
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 69
ENGLISH
Playback
Connecting to a TV which has no Audio and Video input jacks
You can connect your camcorder to a TV through a VCR.
VCR
VIDEO
AUDIO(L)
AUDIO(R)
S-VIDEO
S-VIDEO
BLC
FADE
REC
SEARCH
S SHOW
EASY
FWD
REV
ANTENNA
RDER
MCO
A
GC
UN
MS
A/V
LENS 10XZOOM
MULTI
TV
SA
CAMCORDER
Playback
You can play the recorded tape
in PLAYER mode.
1. Connect a power source and set the power switch to PLAYER mode.
2. Insert the tape you wish to play back.
3. Using the
(FF) and
(REW) buttons, find the first position
you wish to play back.
4. Press the
(PLAY/STILL) button.
The images you recorded will appear on the TV after a few seconds.
If a tape reaches its end while being played back, the tape will rewind
automatically.
Note
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 70
ENGLISH
Playback
Various Functions while in PLAYER mode
The PLAY/STILL, STOP, FF, REW buttons are located on the camcorder and the Remote Control.
The F.ADV(Frame advance), X2, SLOW buttons are located on the Remote Control only. (SCD24 only)
To prevent tape and head-drum wear, your camcorder will automatically stop if it is left in STILL or SLOW modes
TI
MUL
(PLAY/STILL) button.
MULTI
(FF) or
(REW) buttons once during Playback or Still mode.
To resume normal playback, press the
(PLAY/STILL) button.
Keep pressing
(FF) or (REW) buttons during Playback or Still mode.
To resume normal playback, release the button.
Slow playback (Forward/Reverse) (SCD24 only)
Forward Slow Playback
70
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 71
ENGLISH
Playback
Frame advance (To play back frame by frame) (SCD24 only)
Press the F.ADV button on the
Notes
Mosaic shaped distortion may appear on the screen while in some of the various playback modes.
- Mosaic shaped distortion or noise may be experienced when you play back tapes recorded in LP which
contain various playback functions.
Sound will only be heard during normal SP or LP playback.
71
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 72
ENGLISH
Playback
ZERO MEMORY (SCD24 only)
The MEMORY function works in both CAMERA and PLAYER modes.
You can mark a point on a tape that you want to return to following playback.
1. Press the ZERO MEMORY button on the remote control during playback or recording at the point you wish to return to.
The time code is changed to a tape counter that is set to zero memory with the M 0:00:00(Zero memory indicator)
If you want to cancel the zero memory function, press the ZERO MEMORY button again.
2. Finding the zero position.
When you have finished playback, fast forward or rewind the tape.
- The tape stops automatically when it reaches the zero position.
When you have finished recording, press the power switch on the PLAYER and press the
- The tape stops automatically when it reaches the zero position.
(REW) button.
3. The tape counter with the M (Zero memory indicator) disappears from the display and the tape counter is
changed to the time code.
Notes
72
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 73
ENGLISH
Playback
PB DSE (Playback Digital Special Effects)
The PB DSE function works in PLAYER mode.
The PB DSE function enables you to apply Digital Special Effect (DSE) to tape playback or still images.
1. Set the camcorder to the PLAYER mode and then Playback a tape.
2. Press the MENU button and turn the MENU DIAL to highlight A/V.
PLAYER MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
REC MODE
PHOTO SEARCH
COPY
AUDIO MODE
12
AUDIO SELECT
WIND CUT
PB DSE
4. Select PB DSE from the sub-menu and press the ENTER button.
PLAYER MODE
A / V SET
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
AUDIO SELECT
WIND CUT
PB DSE
12
SOUND[1]
8. To cancel the PB DSE function, set the PB DSE to off or press the STOP button.
Notes
You cannot apply the PB DSE function to the pictures which are being input from the external.
Once you modify an image using the PB DSE function, it cannot be imported to your PC from
the camcorders DV jack.
73
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 74
ENGLISH
Playback
PB ZOOM
The PB ZOOM function works in PLAYER mode.
The PB ZOOM function enables you to magnify playback or still image.
Notes
74
You cannot apply the PB ZOOM function to the pictures which are being input
from an external video source.
The PB ZOOM image cannot be imported to your PC from the camcorders DV jack.
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 75
ENGLISH
Connecting to a PC
If you want to transmit data to a PC, you must install a IEEE 1394 add-on card onto the PC. (not supplied)
The frame rate recorded for video capturing is dependent on the capacity of the PC.
Notes
When you transmit data from the camcorder to another DV device, some functions may not work.
If this occurs, please reconnect the DV cable or turn the power OFF and ON again.
When you transmit data from the camcorder to PC,
PC function button is not available in M.PLAY mode.
Do not use the PC CAMERA and IEEE1394 together at the same time. This will shut off IEEE1394.
75
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 76
ENGLISH
DISPLAY
T
IGH
V.L
PB
ZO
OM
(STOP) button.
Notes
76
When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
Operations are not guaranteed for all of the recommended computer environments mentioned above.
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 77
ENGLISH
USB interface
Transferring a Digital Image through a USB Connection
You can easily transfer a still image from a camera, tape to a PC without additional add-on cards via a USB connection.
You can transfer an image to a PC via a USB connection.
If you transfer data to a PC, you need to install the software (Driver, Editing software) supplied with the camcorder.
System Requirements
Notes
77
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 78
ENGLISH
USB interface
Installing DVC Media 5.0 Program
Do not connect the camcorder to PC before installing the program.
If another camera or scanner is connected, please disconnect it in advance.
This explanation is based on Windows 98SE OS.
78
Program installation
1. Insert the software CD into CD-ROM drive.
1.
- Installation selection screen appears in the monitor.
2. If the installation selection screen does not appear after inserting the CD
click Run on the Windows Start menu and execute SETUP.EXE file to begin installation.
- When CD-ROM drive is set to D:drive, type D:\setup.exe and press Enter.
3. Click one of the icons listed below to install the selected software. (The program
automatically check and install the driver which the PC is needed)
DVC Driver: USB removable Disk Driver (Windows 98SE only)
USB PC CAMERA Driver
Editing Software
Using the removable Disk function
You can easily transfer data from a memory stick to a PC without additional add-on cards via a USB connection.
1. Set the mode switch to memory, set the power switch to CAMERA or PLAYER.
2. Connect one end of the USB cable to the USB jack on the camcorder and the other end to the USB connector
on your computer.
Using the PC camera function
You can use this camcorder as a PC CAMERA.
When you connect to a Web site that can provide video chatting functions, you can use your camcorder
for such functions.
Using the camcorder with PC installed Net-meeting program, you can conduct video conference.
The screen size of PC CAMERA is 160 120 Pixel.
If PC is connected with the USB to the camcorder, the buttons which excepts the POWER SWITCH, MODE SWITCH,
ZOOM SWITCH, and NITE PIX SWITCH are not operated.
1. Set the mode switch to Tape, set the power switch to CAMERA.
2. Connect one end of the USB cable to the USB jack on the camcorder and the other end to the USB connector on your
computer.
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 79
ENGLISH
USB interface
Connecting to a PC
1. Connect a USB cable to the USB port on the PC.
2. Connect the other end of the USB cable into the proper terminal on the camcorder. (USB jack)
Disconnecting the USB cable
After completing the data transmission, you must disconnect the cable in the following way:
1. Select the removable disc icon and click the right mouse button to select [Eject].
2. Select [Confirm] and disconnect the USB cable when the Windows Splash screen appears.
Notes
If you disconnect the USB cable from the PC or the camcorder while transferring, the data transmission
will stop and the data may be damaged.
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with
other USB devices, the camcorder may not work properly.
- If this occurs, remove all USB devices from the PC and reconnect the camcorder.
USB Cable
79
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 80
ENGLISH
(SCD24 only)
The Memory Stick(SCD24 only) stores and manages still images recorded by the camera.
Single
Slide show
Multi display
Protecting images against accidental erasure
Deleting images recorded on a card
Print marking still images
Formatting a card (MEMORY STICK)
Terminal
Protection
tab
Notes
You can use most of the cameras functions when recording to the Memory Stick.
TM
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 81
ENGLISH
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 82
ENGLISH
DCIM
The moving images that you recorded are saved in MPEG4 file format on the card.
Each file has a file number and all files are assigned to a folder.
Image Format
Still image
100 SSDVC
DCAM 0001
DCAM 0002
..
..
101SSDVC
*MEM/P
000-0000
File number
Folder number
Moving Image
82
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 83
ENGLISH
M.REC MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
M.REC MODE
M.REC MODE
MEMORY SET
MEMORY SET
M.PLAY SELECT
PHOTO QUALITY
MPEG4 SIZE
PRINT MARK
PROTECT
FILE NO.
DELETE
FORMAT
M.PLAY SELECT
PHOTO QUALITY
MPEG4 SIZE
PRINT MARK
PROTECT
FILE NO.
DELETE
FORMAT
PHOTO
SF
320X240
000
PHOTO QUALITY
SUPER FINE
FINE
NORMAL
SF
F
N
SERIES
QUALITY
SUPER FINE
FINE
NORMAL
8MB
Approx.45
Approx.85
Approx.155
16MB
Approx.90
Approx.170
Approx.310
- The actual number that you can record varies depending on the image size.
83
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 84
ENGLISH
84
22/240
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 85
ENGLISH
85
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 86
ENGLISH
86
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 87
ENGLISH
100-0025
19
20
001
22
23
21
24
22/24
MULTI
Notes
87
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 88
ENGLISH
PLAYER MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
3. Turn the MENU DIAL to highlight A/V and press the ENTER button.
The submenu will appear.
4. Turn the MENU DIAL to highlight PHOTO COPY and press the ENTER button.
All still images that recorded on a cassette will be copied to a Memory Stick.
5. The camcorder automatically performs the photo search to find still images and copying starts.
6. Press (STOP) button to stop copying.
Copying stops when the cassette is finished or Memory Stick is full.
88
REC MODE
PHOTO SEARCH
COPY
AUDIO MODE
12
AUDIO SELECT
WIND CUT
PB DSE
PLAYER MODE
A / V SET
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE
AUDIO SELECT
WIND CUT
PB DSE
12
SOUND[1]
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 89
ENGLISH
THIS FILE : You can set a print mark on the photo image displayed on the LCD.
ALL FILES : To print 1 copy each of all of the stored images.
(FWD) and
(REV) buttons, search for the still image that you want to mark.
Notes
When you setup the PRINT MARK option to ALL FILES, 999 files from the current file are set to 1 or 0.
The ALL FILES option may require extended operation time depending on the number of stored images.
89
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 90
ENGLISH
If you execute FORMAT, all images including protected images will be erased.
(FWD) and
(REV) buttons, search for the still image that you want to protect.
(FWD) and
(REV) buttons, search for the still image that you wish to protect.
90
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 91
ENGLISH
(FWD) and
(REV) buttons, search for the still image that you want to delete.
Note
If you try to delete a protected image, PROTECT! appears on the screen.
91
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 92
ENGLISH
Attention
If you execute the MEMORY FORMAT function, all images will be erased completely and erased images
cannot be recovered.
1.
2.
3.
4.
5.
6.
7.
8.
9.
If you want to format the Memory Stick on your PC, use only the Memory Stick formatter supplied with the software CD.
92
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 93
ENGLISH
IGH
V.L
MPEG REC
Notes
DCIM
MISC
SSMOV
100SMDVC
93
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 94
ENGLISH
IGH
V.L
MPEG PB
The MPEG PB function works in PLAYER mode only.
The MPEG PB function allows you to watch the moving pictures (MPEG4) recorded.
During the MPEG4 playback, you can hear sound at the PC speaker only.
(You cannot hear it from the speaker onto a camcorder and TV.)
1.
2.
3.
4.
5.
6.
7.
8.
M.PLAY MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER
M.PLAY SELECT
PHOTO QUALITY
MPEG4 SIZE
PRINT MARK
PROTECT
FILE NO.
DELETE
FORMAT
M.PLAY MODE
MEMORY SET
Notes
94
M.PLAY SELECT
PHOTO QUALITY
MPEG4 SIZE
PRINT MARK
There could be any broken or mosaic pictures while playing the MPEG4 moving
PROTECT
FILE NO.
picture images, but it is not malfunction.
DELETE
FORMAT
Sharp G.726 Audio Codec is automatically installed through Internet when you play
the MPEG4 file.
If sharp G.726 Audio Codec is not properly installed on your PC, it could not play Audio in the MPEG4 file.
Moving image recorded on the Memory Stick may not play in other manufacturers camcorders.
The MPEG4 file recorded by another camcorder might not be allowed th play by this camcorder.
- You need Microsoft Windows Media Player Version 9 or higher version and Sharp G726 Audio Codec in order to
play MPEG4 file on the Memory Stick on your PC. (Microsoft Windows Media Player Version 9 (Eng) is included in
the CD that is supplied.)
- You can download the Microsoft Windows Media Player applied each languages on Microsoft Website,
http://www.microsoft.com/windows/windowsmedia/download/ default.asp.
MPEG4
SF
320X240
000
SERIES
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 95
ENGLISH
Maintenance
After finishing a recording
At the end of a recording you must remove the power source.
When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span
95
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 96
ENGLISH
Maintenance
Cleaning and Maintaining the Camcorder
Cleaning the Video Heads
To ensure normal recording and clear pictures, clean the video heads
when the playback pictures display square block-shaped noise or distortion, or a blue screen appears.
(PLAY/STILL) button.
(STOP) button after 10 seconds.
Notes
96
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 97
ENGLISH
Maintenance
Using Your Camcorder Abroad
Each country or region has its own electric and color systems.
Before using your camcorder abroad, check the following items.
Power sources
You can use your camcorder in any country or area with the supplied AC Power Adapter within 100V to 240V,
50/60 Hz.
Use a commercially available AC plug Adapter, if necessary, depending on the design of the local wall outlet.
Color system
PAL-compatible Countries/Regions
Australia, Austria, Belgium, Bulgaria, China, CIS, Czech Republic, Denmark, Egypt, Finland, France, Germany, Greece,
Great Britain, Holland, Hong Kong, Hungary, India, Iran, Iraq, Kuwait, Libya, Malaysia, Mauritius, Norway, Romania,
Saudi Arabia, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Syria, Thailand, Tunisia, etc.
NTSC-compatible Countries/Regions
Bahamas, Canada, Central America, Japan, Mexico, Philippines, Korea, Taiwan, United States of America, etc.
Note
You can make recordings with your camcorder and view pictures on the LCD from anywhere in the world.
97
97
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 98
ENGLISH
Troubleshooting
Troubleshooting
Before contacting a Samsung authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Self Diagnosis Display
Display Blinking
Informs that...
Action
slow
TAPE END!
slow
TAPE END!
no
TAPE!
slow
Insert a tape.
PROTECTION!
slow
....D
L
C
R
slow
slow
see below.
Moisture Condensation
If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder,
on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or
the unit may not operate correctly.
To prevent possible damage under these circumstances, the camcorder is fitted with a moisture sensor.
If there is moisture inside the camcorder,
(DEW) is displayed. If this happens, none of the functions
except cassette ejection will work.
Open the cassette compartment and remove the battery.
Leave the camcorder for at least two hours in a dry warm room.
98
98
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 99
ENGLISH
Troubleshooting
Self Diagnosis Display in M.REC/M.PLAY mode
Display
Blinking
Informs that...
99
Action
Insert a Memory Stick.
MEMORY FULL!
slow
NO STORED
PHOTO! or
NO STORED
MPEG4!
slow
WRITE
PROTECT!
slow
PROTECT!
slow
READ ERROR!
WRITE ERROR!
NOT
FORMATTED!
slow
NOW DELETE...
slow
NOW FORMAT...
NOW COPY...
99
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 100
ENGLISH
Troubleshooting
If these instructions do not solve your problem,
contact your nearest Samsung authorized service center.
Symptom
Explanation/Solution
You cannot switch the Check the battery pack or the AC Power Adapter.
camcorder on.
100
START/STOP button
does not operate
while recording.
Play, FF or REW
button does not work.
100
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 101
ENGLISH
Specifications
Model name: SCD23/D24
System
Video signal
Video recording system
Audio recording system
Usable cassette
Tape speed
Tape recording time
FF/REW time
Image device
Lens
Filter diameter
LCD monitor/Viewfinder
Size/dot number
LCD monitor Method
Viewfinder
Connectors
Video output
S-video output
Audio output
DV input/output
USB output
External mic
NTSC
2 rotary heads, Helical scanning system
Rotary heads, PCM system
Digital video tape (6.35mm width): Mini DV cassette
SP: approx. 18.81mm/s LP: approx. 12.56mm/s
SP: 60 minutes (when using DVM 60),
LP: 90 minutes (when using DVM 60)
Approx. 180 sec. (using DVM60 tape)
CCD (Charge Coupled Device)
F1.4 10x(Optical), 800x(Digital) Electronic zoom lens
37
2.5inchs (112,000)
TFT LCD
0.24" B/W LCD
1Vp-p (75 terminated)
Y: 1Vp-p, 75, C: 0. 286Vp-p, 75
-7.5dBs (600 terminated)
4pin special in/out connector
Mini-B type connector
3.5 stereo
General
Power source
Power source type
Power consumption
(Recording)
Operating temperature
Storage temperature
External dimension
Weight
Built-in MIC
Remote control
101
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 102
ENGLISH
INDEX
-A-
-M-
Accessories ............................................................................................... 12
Audio dubbing ........................................................................................... 61
AUDIO MODE ........................................................................................... 49
-B-
-CCassette ....................................................................................................
Cleaning ....................................................................................................
CLOCK SET .............................................................................................
Connecting ................................................................................................
27
96
37
69
-DDATE/TIME ............................................................................................... 51
DC Cable .................................................................................................. 23
Deleting ..................................................................................................... 91
DEMONSTRATION .................................................................................. 39
DIS ............................................................................................................ 45
DSE ........................................................................................................... 46
DV ..................................................................................................... 75, 76
-FFade ..........................................................................................................
Formatting .................................................................................................
Frame advance .........................................................................................
Functions buttons .....................................................................................
60
92
71
14
-H-
83
63
40
90
54
34
34
86
-UUSB ........................................................................................................... 77
-W-
-I-
IEEE1394 .................................................................................................. 75
-L-
-Z-
102
00616B SCD23-SEA(59~103)
5/12/03 9:53 AM
Page 103
ENGLISH
Warranty
SAMSUNG
LIMITED WARRANTY
SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship.
SEA further warrants that if product fails to operate properly within the specified warranty period and the failure is due
to improper workmanship or defective material, SEA will repair or replace the product at its option.
All warranty repairs must be performed by a SEA authorized service center. The name and address of the location
nearest you can be obtained by calling toll free: 1-800 SAMSUNG (1-800-726-7864).
Labor
90 days carry-in
Parts
1 year
On carry-in models, transportation to and from the service center is the customers responsibility.
The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase.
It must be presented to the authorized service center.
EXCLUSIONS (WHAT IS NOT COVERED)
This warranty does not cover damage due to accident, fire, flood and/or other acts of God; misuse, incorrect line
voltage, improper installation, improper or unauthorized repairs, commercial use, or damage that occurs in shipping.
Exterior and interior finish, lamps, and glass are not covered under this warranty.
Customer adjustments which are explained in the instruction manual are not covered under the terms of this warranty.
This warranty will automatically be voided for any unit found with a missing or altered serial number. This warranty is
valid only on products purchased in the United States and Puerto Rico.
Some States do not allow the exclusions or limitations of incidental or consequential damages, or allow limitations on
how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.
103
00616B SCD23-SEA(01~27)
5/12/03 9:46 AM
Page 100
ENGLISH
ELECTRONICS
SERVICE DIVISION
400 Valley Road, Suite 201, Mt. Arlington N.J. 07856
Tel: 1-800-SAMSUNG
(1-800-726-7864)
AD68-00616B