1409 HOBAS CC Pressure Pipe Systems Web

h
Technical Product Data

CC Pressure Pipe Systems
E Engineering GmbH
All rights reserved.
Publication: 09/2014
All rights reserved. No part of this document may be reproduced or utilized in any form or by any means without prior written permission.
All information in the document is correct at the time of going to press. All data, especially tecnical data, is subject to subsequent modifications.
The data given is not binding and must therefore be checked in each individual case and revised as appropriate.
HOBAS Pressure Pipe Systems

Widespread field of applications
Sewers, storage systems, hydropower lines, industrial applications and many more: HOBAS Pressure Pipe Systems made of
glass fiber reinforced plastic (GRP) are used all around the world in numerous different fields of application. The roots of this
composite material's technology can be found in the automotive, aerospace and shipbuilding industry. HOBAS has been
producing GRP pipes since the 1950s, the material has been further developed over the years and is today available for
complex challenges for instance in the following fields of application:
Potable water
Wastewater
Hydropower
Jacking
Air pipe systems

Industrial plants
Cooling water lines
Rehabilitation of pipe systems
etc.
Features and advantages:
Low weight and simple jointing technology increase installation rate

Homogenous wall structure thanks to patented centrifugal casting process
High abrasion resistance
Corrosion resistance
Little incrustations and sludge deposition
Very smooth inner surface (roughness 0.01 mm) and outer surface
Non-sensitive to frost and high temperatures
Very low expansion coefficient
High UV resistance
High load capacity
High chemical resistance
Long service life
Curved installation with fewer or no bends possible
Comprehensive range of available fittings including shafts and manholes (seamless)
Simple handling and shortening on site
Installation independent of weather conditions
Less water hammer
etc.
09/2014
Abbreviations:
Angle (bend, deflection)
Width
B1
de to product standard (EN 1796/EN 14364)
B2
de to GRP and casting standards
B3
de to GRP and PVC standards
B4
de to GRP and steel standards
CC
Centrifugal casting
de
Pipe external diameter
DEC
Coupling external diameter
DN
Nominal diameter
Pipe wall thickness
EPDM
Ethylene propylene diene monomer rubber
FWC
Filament wound GRP coupling with full width EPDM gasket
GRP
Glass fiber reinforced plastic
Length
LC
Coupling width
Mass
NBR
Nitrile butadiene rubber
PN
Nominal pressure
Radius
SN
Nominal stiffness
09/2014
PIPES
PIPE JOINTS
Pressure Pipes DN 150 - 1000 PN 6, 10
A21
A21
A21
A21
A22
Restrained Pressure Pipes DN 200 - 1200 PN 6, 10
A23
Jacking Pressure Pipes de 427 - 752 PN 6
A23
A23
A23
B21
Pressure Pipe Joints DN 150 - 1000 PN 6 - 32
B21
B22
Restrained Pressure Pipe Joints PN 6, 10
B23
Special Pressure Joints PN 6, 10, 16
Pressure Bends DN 150 - 1000 PN 6
C21
C21
C21
C22
T-Pieces DN 150/150 - 1200/650 PN 6, 10
C22
T-Pieces DN 1280/150 - 3600/650 PN 6, 10
C22
T-Pieces DN 700/700 - 3600/1600 PN 6, 10
C23
Reducers PN 6, 10
C24
Loose Flanges GRP / Steel PN 10
C25
Fixed Flanges GRP PN 10
C26
Blind Flanges GRP / Steel PN 10
D21
Utility Shafts
MANHOLES
C21
D22
Pressure Release Shafts
D23
Pump Shafts
ACCESSORIES
FITTINGS
A21
E21
Masonry Couplings DN 150 - 1000
E21
E22
Structural Adapters DN 150 - 1000
E22
F21
Material Specifications
This version replaces all previous versions.

For all current data and values please visit our website www.hobas.com.
09/2014
A21

PRESSURE PIPES
The standard pipe length is 6 m. Lengths of 1 / 2 / 3 m are available on request.
PN 6
SN 10000
SN 20000
SN 5000
SN 10000
SN 20000
DN
Diameter series
SN 5000
PN 10
[mm]
150
B2
168
200
B2
220
11
10
250
B2
272
14
17
11
13
15
10
300
B2 B4
324
20
10
25
13
17
10
22
12
350
B2
376
21
10
27
12
32
14
18
23
12
29
14
400
B3
401
23
10
29
12
35
15
20
10
26
12
32
15
400
B2
427
26
10
33
13
40
15
23
10
29
13
36
15
450
B2
478
30
11
38
13
46
16
25
10
33
13
41
16
500
B3
501
32
11
41
14
50
16
28
11
36
13
45
16
500
B2
530
38
12
46
14
55
17
31
11
40
14
50
17
550
550
40
12
49
15
60
18
35
12
43
15
54
18
600
B1
616
50
14
61
16
74
19
42
13
53
16
67
20
de
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
650
650
55
14
68
17
82
20
46
14
59
17
74
20
700
B1
718
66
15
81
18
101
23
56
15
71
18
91
23
750
752
72
16
89
19
110
24
61
15
77
19
99
24
800
B1
820
85
17
105
21
130
25
71
16
91
20
117
25
860
860
93
18
114
21
142
26
78
17
99
21
128
27
900
B1
924
106
19
134
23
163
28
89
18
116
23
147
28
960
960
114
19
144
24
175
29
95
19
125
24
158
29
1000
B1
1026
129
21
163
25
199
31
108
20
142
25
179
31
Wall thicknesses and masses are guidelines (plus tolerances).

The standard length is 6 m (+0/-60 mm). Shorter pipes are supplied depending on availability.
All figures quoted are values and may vary slightly from the finished product due to manufacturing tolerances. The information and recommendations reflect the state of knowledge at the time of
publication. They cannot therefore be construed as an express or implied warranty. The details must be checked and, if necessary, agreed in each individual case. HOBAS cannot accept any
liability. This also applies to errors, omissions and changes to technical data without notice.
09/2014
A21

PRESSURE PIPES
PN 6
SN 10000
SN 20000
SN 5000
SN 10000
SN 20000
Diameter series
SN 5000
PN 10
[mm]
1100
1099
151
23
187
27
228
33
124
21
162
27
205
33
1200
B1
1229
187
25
231
30
282
36
156
24
200
29
254
37
1280
1280
201
26
249
31
305
38
169
24
217
31
274
38
1348
1348
222
27
275
32
336
39
186
25
239
32
304
40
1400
B1
1434
249
28
309
34
379
41
209
27
269
34
342
42
1500
1499
271
29
336
35
413
43
221
28
286
35
365
43
1535
1535
286
30
355
36
436
44
234
28
304
36
389
45
1600
B1
1638
323
32
402
39
495
47
266
30
344
38
441
47
1720
1720
355
33
442
40
543
49
292
31
378
39
485
49
1800
B1
1842
404
35
504
43
621
52
333
33
430
42
554
53
1940
1937
445
37
555
45
685
55
367
35
474
44
611
55
2000
B1
2047
494
39
617
47
763
58
403
36
528
46
680
58
2160
2160
548
40
684
49
847
61
448
38
591
49
755
61
2200
B1
2250
592
42
740
51
917
63
484
40
640
51
819
63
2400
2400
673
45
841
55
1042
67
550
42
726
54
930
68
2400
B1
2453
702
46
877
56
1087
68
574
43
757
55
971
69
2555
2555
759
47
949
58
1178
71
621
45
819
57
1051
72
3000
3000
1034
55
1297
67
1611
83
3270
3270
1230
61
1495
76
1859
94
3600
3600
1495
65
1853
80
2309
98
DN
de
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
On request

09/2014
A21

PRESSURE PIPES
PN 16
PN 20
SN 20000
SN 10000
SN 20000
DN
Diameter series
SN 10000
[mm]
150
B2
168
200
B2
220
10
10
250
B2
272
11
15
10
11
14
10
300
B2 B4
324
16
10
21
12
15
10
20
12
350
B2
376
21
11
27
14
20
11
26
13
400
B3
401
25
12
31
14
23
12
30
14
400
B2
427
28
12
34
15
26
12
33
15
450
B2
478
31
13
39
15
29
12
38
15
500
B3
501
34
13
42
16
32
13
41
16
500
B2
530
37
14
47
17
35
13
47
17
550
550
40
14
51
17
38
14
51
18
600
B1
616
50
16
62
19
46
15
62
19
de
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
650
650
56
16
69
20
51
16
68
20
700
B1
718
65
17
85
22
61
17
81
21
750
752
71
18
93
23
66
18
90
23
800
B1
820
84
19
109
25
77
19
106
24
860
860
92
20
120
26
84
20
116
25
900
B1
924
108
22
137
27
96
21
132
27
960
960
116
23
147
28
103
21
142
28
1000
B1
1026
132
24
167
30
119
23
162
30

09/2014
A21

PRESSURE PIPES
PN 16
PN 20
DN
Diameter series
SN 10000
SN 20000
SN 10000
SN 20000
de
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
1100
1099
151
26
192
32
135
25
185
32
1200
B1
1229
186
29
237
35
166
27
230
35
1280
1280
202
30
256
37
179
28
248
36
1348
1348
222
31
283
38
227
32
275
38
1400
B1
1434
251
33
319
41
256
34
309
40
1500
1499
278
35
337
42
239
32
329
42
1535
1535
293
36
357
43
251
33
347
43
1600
B1
1638
332
38
404
45
283
35
393
45
1720
1720
1800
B1
1842
1940
1937
2000
B1
2047
2160
2160
2200
B1
2250
2400
2400
2400
B1
2453
2555
2555
3000
3000
3270
3270
3600
3600
On request

09/2014
A21

PRESSURE PIPES
PN 32
PN 25
SN 20000
SN 10000
SN 20000
DN
Diameter series
SN 10000
[mm]
150
B2
168
200
B2
220
250
B2
272
11
14
10
13
10
13
10
300
B2 B4
324
15
10
20
12
17
11
19
12
350
B2
376
20
11
26
13
23
12
24
13
400
B3
401
23
12
29
14
26
13
27
14
400
B2
427
26
12
33
15
28
13
30
14
450
B2
478
29
12
38
15
35
15
35
15
500
B3
501
32
13
41
16
37
15
38
15
500
B2
530
35
13
47
17
41
16
42
16
550
550
38
14
51
18
45
16
45
16
600
B1
616
46
15
61
19
54
18
55
18
650
650
51
16
68
20
60
18
60
19
700
B1
718
60
17
84
22
71
20
72
20
750
752
66
18
91
23
77
21
79
21
de
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
[kg/m]
[mm]
800
B1
820
77
19
104
24
93
23
94
23
860
860
84
19
113
25
101
24
103
24
900
B1
924
95
21
129
27
115
25
117
25
960
960
102
21
139
28
123
26
126
26
1000
B1
1026
118
23
157
29
139
27
142
28
> DN 1000 on request

09/2014
10
A22
Restrained Pressure Pipes DN 200 - 1200 PN 6, 10

PRESSURE PIPES
The pipes are supplied with either restrained FW pressure pipe joints, flange connections or restrained mechanical
couplings. The standard pipe length is 6 m. Lengths of 1 / 2 / 3 m are available on request.
PN 10
SN 10000
SN 10000
DN
Diameter series
PN 6
[mm]
200
B2
220
250
B2
272
13
11
300
B2 B4
324
18
10
15
10
de
[kg/m]
[mm]
[kg/m]
[mm]
350
B2
376
24
12
20
11
400
B2
427
30
13
25
12
450
B2
478
38
14
31
14
500
B2
530
46
15
38
15
550
550
50
16
41
15
600
B1
616
62
16
51
17
700
B1
718
83
20
75
19
800
B1
820
104
22
86
21
900
B1
924
134
24
111
24
1000
B1
1026
161
27
133
26
1100
1099
185
29
1200
B1
1229
229
32
Higher pressure classes and diameters on request.

09/2014
11
A23
Jacking Pressure Pipes with flush couplings, incl. allowable jacking forces. The standard pipe length is 6 m. Lengths of 1 / 2 /
3 m are available on request.
de
[mm]
427
478
530
550
616
650
718
SN
SN
SN
SN
SN
SN
SN
SN
SN
SN
32000
40000
50000
64000
80000
100000
128000
160000
200000
320000
SN
640000 1000000
e [mm]
43
m [kg/m]
112
F [kN]*
502
e [mm]
41
46
m [kg/m]
122
135
F [kN]*
506
664
e [mm]
44
51
m [kg/m]
145
166
F [kN]*
665
911
53
e [mm]
38
47
m [kg/m]
133
161
179
F [kN]*
522
860
1078
e [mm]
43
50
58
m [kg/m]
168
193
220
F [kN]*
756
1052
1381
e [mm]
38
44
54
62
m [kg/m]
159
182
219
248
F [kN]*
570
846
1292
1637
e [mm]
48
59
68
m [kg/m]
221
265
300
F [kN]*
752
SN
684
1205
1635
e [mm]
42
45
51
62
72
m [kg/m]
205
219
245
293
334
F [kN]*
912
1074
1392
1959
2459
Wall thicknesses and pipe masses are minimum values or guidelines (plus tolerances).
* The allowable jacking force (kN) corresponds to a safety factor of 3.5 times the ultimate force calculated. Project-related
static calculations can result in differing allowable jacking forces.
All values derive from calculations and may therefore slightly vary from the finished product due to manufacturing tolerances. The information and recommendations reflect the state of knowledge at
the time of publication and cannot be construed as an express or implied warranty. All information has to be checked and if necessary agreed upon in each individual case. HOBAS does not accept
any liability. This also applies to errors, omissions and changes to technical data without notice.
09/2014
12
A23
Jacking Pressure Pipes with flush couplings, incl. allowable jacking forces. The standard pipe length is 6 m. Lengths of 1 / 2
/ 3 m are available on request.
SN
SN
SN
SN
SN
SN
SN
SN
SN
SN
32000
40000
50000
64000
80000
100000
128000
160000
200000
320000
e [mm]
42
45
49
54
m [kg/m]
223
238
258
282
343
393
F [kN]*
972
1150
1384
1674
2408
3008
e [mm]
43
47
51
58
72
de
[mm]
820
860
924
960
1026
1099
1229
1280
SN
640000 1000000
67
m [kg/m]
240
261
281
317
386
F [kN]*
1464
1713
1959
2384
3210
50
54
62
77
e [mm]
m [kg/m]
297
320
363
442
F [kN]*
1230
1495
2017
2967
52
56
64
80
e [mm]
42
44
48
m [kg/m]
263
275
298
322
345
390
478
F [kN]*
1167
1308
1589
1866
2142
2684
3738
e [mm]
52
56
61
68
m [kg/m]
346
371
401
444
F [kN]*
1429
1725
2092
2600
e [mm]
64
73
m [kg/m]
452
510
F [kN]*
2234
2933
e [mm]
46
53
56
61
66
71
81
m [kg/m]
397
427
450
487
524
561
634
F [kN]*
2115
4086
4956
2479
2751
3200
3645
e [mm]
55
59
64
68
m [kg/m]
461
492
531
562
F [kN]*
2887
3263
3731
4101
SN
78
09/2014
13
A23
de
[mm]
1434
1499
1535
1638
1720
1842
1937
2047
SN
SN
SN
SN
SN
SN
SN
SN
SN
SN
32000
40000
50000
64000
80000
100000
128000
160000
200000
320000
61
65
71
76
e [mm]
m [kg/m]
572
607
660
703
F [kN]*
3785
4208
4837
5356
68
74
79
e [mm]
m [kg/m]
669
724
769
F [kN]*
3917
4575
5119
70
76
81
e [mm]
66
m [kg/m]
666
704
761
807
F [kN]*
4302
4755
5429
5987
70
75
81
e [mm]
60
65
m [kg/m]
648
699
750
800
860
F [kN]*
3506
4117
4723
5326
6043
e [mm]
59
64
68
73
78
m [kg/m]
672
726
769
822
875
F [kN]*
3683
4327
4840
5477
6110
e [mm]
63
68
73
78
83
m [kg/m]
768
826
883
940
997
F [kN]*
4374
5064
5751
6434
7113
e [mm]
62
67
72
77
m [kg/m]
800
861
921
982
F [kN]*
4446
5177
5903
6626
e [mm]
65
70
75
81
m [kg/m]
884
949
1013
1089
F [kN]*
5170
5942
6709
7625
SN
SN
640000 1000000
09/2014
14
A23
de
SN
SN
SN
SN
SN
SN
SN
SN
SN
SN
[mm]
32000
40000
50000
64000
80000
100000
128000
160000
200000
320000
69
74
79
m [kg/m]
991
1059
1127
F [kN]*
6094
6908
7717
e [mm]
71
76
82
m [kg/m]
1059
1130
1215
F [kN]*
6749
7597
8611
e [mm]
76
81
86
m [kg/m]
1212
1288
1363
F [kN]*
8058
8962
9863
e [mm]
80
84
88
m [kg/m]
1309
1371
1433
F [kN]*
9420
9790
10897
2160
2252
2400
2453
2555
3000
3270
3600
e [mm]
e [mm]
82
85
92
m [kg/m]
1391
1439
1551
F [kN]*
9785
10363
11707
e [mm]
94
100
108
m [kg/m]
1878
1992
2142
F [kN]*
14214
15574
17378
SN
SN
640000 1000000
On request
09/2014
15
B21
HOBAS Pipes are generally delivered with a pre-mounted coupling. The standard pressure pipe joint is a FW
Coupling (FWC) consisting of a GRP sleeve with a permanently fitted, full width EPDM gasket (NBR on request).
FW Couplings are available for all nominal pressure ratings.
DN
150
PN 6
PN 10
PN 16
PN 20
PN 25
PN 32
de
LC
DEC min
DEC min
DEC min
DEC min
DEC min
DEC min
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
168
173
186
188
186
186
186
190
200
220
173
239
241
239
239
241
243
250
272
173
291
292
291
292
294
297
300
324
173
343
344
343
346
349
353
396
402
407
350
376
173
394
398
401
400
401
230
416
419
421
423
425
430
400
427
230
444
445
449
451
455
460
496
501
504
508
514
523
526
531
537
450
478
230
495
500
501
230
517
518
500
530
230
547
548
554
557
562
569
550
550
230
567
569
575
578
583
590
600
616
230
634
637
643
648
652
660
650
650
230
666
670
677
682
687
694
700
718
230
736
741
748
753
759
768
750
752
230
770
775
782
788
795
803
845
853
859
865
876
894
899
907
918
800
820
230
841
860
860
230
880
885
900
924
230
944
950
960
966
974
985
960
960
230
980
987
996
1003
1011
1022
1000
1026
230
1047
1054
1064
1071
1080
1092
09/2014
16
B21

PIPE JOINTS
HOBAS Pipes are generally delivered with a pre-mounted coupling. The standard pressure pipe joint is a FW
Coupling (FWC) consisting of a GRP sleeve with a permanently fitted, full width EPDM gasket (NBR on request).
FW Couplings are available for all nominal pressure ratings.
PN 6
PN 10
PN 16
PN 20
de
LC
DEC min
DEC min
DEC min
DEC min
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
1100
1099
230
1120
1121
1139
1146
1200
1229
230
1252
1260
1273
1281
DN
1280
1280
230
1303
1313
1325
1334
1348
1348
230
1372
1382
1396
1405
1400
1434
230
1459
1469
1483
1493
1548
1558
1500
1499
310
1524
1533
1535
1535
310
1563
1572
1587
1597
1690
1702
1600
1638
310
1664
1675
1720
1720
310
1746
1756
1800
1842
310
1870
1881
1940
1937
310
1968
1980
2000
2047
310
2075
2089
2160
2160
310
2189
2202
2200
2250
310
2282
2296
2400
2400
310
2431
2446
2400
2453
310
2487
2502
2555
2555
310
2591
2606
3000
3000
350
3050
3270
3270
350
3321
3600
3600
350
3657
On request
09/2014
17
B22
Restrained Pressure Pipe Joints PN 6, 10

PIPE JOINTS
HOBAS Pipes are generally delivered with a pre-mounted coupling. The restrained pressure pipe joint is a FW Coupling
(FWC) consisting of a GRP sleeve with a permanently fitted, full width EPDM gasket (NBR on request) and locking key.
FW Couplings are available for all nominal pressure ratings (see A22).
PN 6
PN 10
DN
de
[mm]
LC
[mm]
DEC
[mm]
LC
[mm]
DEC
[mm]
200
220
297
272
297
278
250
272
305
324
305
334
300
324
315
378
315
386
350
376
327
438
331
446
400
427
345
493
345
501
450
478
357
552
357
560
500
530
367
604
367
614
550
550
375
628
375
636
600
616
389
686
389
714
700
718
395
792
465
826
800
820
409
902
487
938
900
924
423
1010
513
1058
1000
1026
435
1120
535
1168
1100
1099
447
1197
1200
1229
467
1337

09/2014
18
B23
Special Pressure Joints PN 6, 10, 16
Mechnical coupling:
The mechanical coupling consists of a stainless steel sleeve with a mechanical screw connection and an EPDM seal (NBR on
request). By default, coupling systems by Straub or Teekay are used.
PN 6
DN
PN 10
PN 16
de
LC
DEC
LC
DEC
LC
DEC
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
150
168
110
205
110
205
110
205
200
220
138
293
138
293
139
301
250
272
138
341
138
341
139
349
300
324
138
390
138
397
139
397
350
376
138
439
138
447
139
447
400
427
139
488
139
496
141
496
450
478
139
338
139
545
141
545
500
530
139
588
139
595
141
595
600
616
141
679
141
679
141
679
700
718
141
779
141
779
141
779
800
820
141
880
141
880
148
898
900
924
141
983
141
983
148
1000
1000
1026
141
1048
141
1038
148
1101
1100
1099
141
1156
141
1156
1200
1229
141
1285
148
1303
1280
1280
141
1336
148
1353
1400
1434
141
1489
148
1506
1500
1499
141
1554
148
1571
1600
1638
141
1692
148
1709
1720
1720
141
1774
148
1791
1800
1842
141
1896
148
1913
1940
1937
141
1990
148
1908
2000
2047
148
2117
148
2117
2160
2160
218
2242
2200
2250
218
2332
2400
2400
218
2482
2555
2555
218
2637
3000
3000
218
3080
3270
3270
218
3351
3600
3600
218
3681
On request
Source: Straub 2013
For project-related dimensions, please consult the HOBAS Application Engineering Department in charge.
09/2014
19
C21

FITTINGS
31 - 60
1 - 30
61 - 90
Installation lengths for bends consisting of pipe segments according to the specified standard classes. Bends are also supplied
in project-related intermediate sizes.
Angle *:
11,25
15
22,5
30
45
60
90
Segments:
de
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
150
168
380
300
380
300
380
300
380
300
500
350
400
400
400
550
200
220
400
300
400
300
400
300
400
300
500
400
400
400
400
550
250
272
430
300
430
300
430
300
430
300
550
400
450
425
450
600
300
324
450
300
450
300
450
300
450
300
550
400
450
450
450
650
350
376
525
325
525
325
525
325
525
325
600
425
525
500
525
700
400
401
600
375
600
375
600
375
600
375
600
450
600
550
600
800
400
427
600
375
675
375
675
375
675
375
700
500
675
575
675
850
450
478
675
375
675
375
675
375
675
375
700
500
675
575
675
850
500
501
750
400
750
400
750
400
750
400
750
525
750
600
750
900
500
530
750
400
750
400
750
400
750
400
750
525
750
625
750
950
550
550
825
450
825
450
825
450
825
450
825
600
825
650
825
1000
600
616
900
450
900
450
900
450
900
450
900
600
900
700
900
1075
650
650
975
475
975
475
975
475
975
475
1000
650
975
750
975
1100
700
718
1050
475
1050
475
1050
475
1050
475
1050
650
1050
775
1050
1200
750
752
1125
500
1125
500
1125
500
1125
500
1125
700
1225
800
1225
1300
800
820
1200
525
1200
525
1200
525
1200
525
1200
700
1200
850
1200
1350
860
860
1290
550
1290
550
1290
550
1290
550
1290
725
1290
875
1290
1400
900
924
1350
550
1350
550
1350
550
1350
550
1350
725
1350
875
1350
1400
960
960
1440
575
1440
575
1440
575
1440
575
1440
750
1440
900
1440
1475
1000
1026
1270
575
1270
575
1270
575
1270
575
1270
750
1270
925
1270
1475
DN
* For intermediate sizes, the data of the respective next higher standard class apply.
Sizes can be adapted to meet transport requirements. Project-related dimensions are to be coordinated with the responsible
HOBAS Application Engineering Department.
09/2014
20
C21

FITTINGS
1 - 30
31 - 60
61 - 90
Angle *:
11,25
15
22,5
30
45
60
90
Segments:
de
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
1100
1099
1320
600
1320
600
1320
600
1320
600
1320
825
1320
1025
1320
1600
1200
1229
1370
600
1370
600
1370
600
1370
600
1370
825
1370
1025
1370
1600
1280
1280
1400
650
1400
650
1400
650
1400
650
1400
850
1400
1050
1400
1650
1348
1348
1450
650
1450
650
1450
650
1450
650
1450
850
1450
1050
1450
1650
1400
1434
1550
675
1550
675
1550
675
1550
675
1550
900
1550
1100
1550
1700
1500
1499
1600
800
1600
800
1600
800
1600
800
1600
1100
1600
1300
1600
2000
1535
1535
1650
800
1650
800
1650
800
1650
800
1650
1100
1650
1300
1650
2000
1600
1638
1700
800
1700
800
1700
800
1700
800
1700
1100
1700
1300
1700
2000
1720
1720
1800
800
1800
800
1800
800
1800
800
1800
1200
1800
1400
1800
2200
1800
1842
1950
850
1950
850
1950
850
1950
850
1950
1200
1950
1400
1950
2200
1940
1937
2000
850
2000
850
2000
850
2000
850
2000
1300
2000
1500
2000
2200
2000
2047
2100
900
2100
900
2100
900
2100
900
2100
1300
2100
1500
2100
2400
2160
2160
2170
900
2170
900
2170
900
2170
900
2170
1300
2170
1500
2170
2400
2200
2250
2280
950
2280
950
2280
950
2280
950
2280
1400
2280
1600
2280
2600
2400
2400
2470
1000
2470
1000
2470
1000
2470
1000
2470
1500
2470
1700
2470
2600
2400
2453
2500
1000
2500
1000
2500
1000
2500
1000
2500
1500
2500
1700
2500
2600
2555
2555
2600
1000
2600
1000
2600
1000
2600
1000
2600
1500
2600
1700
2600
2700
3000
3000
3000
1000
3000
1000
3000
1000
3000
1000
3270
3270
3000
1000
3000
1000
3000
1000
3000
1000
3600
3600
3600
1100
3600
1100
3600
1100
3600
1100
DN
On request
09/2014
21
C21

FITTINGS
1 - 30
31 - 60
61 - 90
Angle *:
11,25
15
22,5
30
45
60
90
Segments:
de
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
150
168
380
300
380
300
380
300
380
300
500
350
400
400
400
550
200
220
400
300
400
300
400
300
400
300
500
400
400
400
400
550
250
272
430
300
430
300
430
300
430
300
550
400
450
425
450
600
300
324
450
300
450
300
450
300
450
300
550
400
450
450
450
650
350
376
525
325
525
325
525
325
525
325
600
425
525
500
525
700
400
401
600
375
600
375
600
375
600
375
700
500
600
550
600
800
400
427
675
375
675
375
675
375
675
375
700
500
675
575
675
850
450
478
675
375
675
375
675
375
675
375
700
500
675
575
675
850
500
501
750
400
750
400
750
400
750
400
750
525
750
600
750
900
500
530
750
400
750
400
750
400
750
400
750
525
750
625
750
950
550
550
825
450
825
450
825
450
825
450
825
600
825
650
825
1000
600
616
900
450
900
450
900
450
900
450
900
600
900
700
900
1075
650
650
975
475
975
475
975
475
975
475
1000
650
975
750
975
1100
700
718
1050
475
1050
475
1050
475
1050
475
1050
650
1050
775
1050
1200
750
752
1125
500
1125
500
1125
500
1125
500
1125
700
1225
800
1225
1300
800
820
1200
525
1200
525
1200
525
1200
525
1200
700
1200
850
1200
1350
860
860
1290
550
1290
550
1290
550
1290
550
1290
725
1290
875
1290
1400
900
924
1350
550
1350
550
1350
550
1350
550
1350
725
1350
875
1350
1500
960
960
1440
575
1440
575
1440
575
1440
575
1440
750
1440
900
1440
1550
1000
1026
1270
575
1270
575
1270
575
1270
575
1360
900
1270
925
1270
1450
DN
HOBAS Fittings > PN 10 on request.
09/2014
22
C21

FITTINGS
1 - 30
31 - 60
61 - 90
Angle *:
11,25
15
22,5
30
45
60
90
Segments:
de
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
1100
1099
1320
600
1320
600
1320
600
1320
600
1520
900
1320
1025
1320
1600
1200
1229
1370
600
1370
600
1370
600
1370
600
1640
900
1400
1025
1500
1650
1280
1280
1400
650
1400
650
1400
650
1400
650
1660
900
1500
1050
1600
1750
1348
1348
1450
650
1450
650
1450
650
1450
650
1830
1000
1550
1050
1650
1800
1400
1434
1550
675
1550
675
1550
675
1550
675
1870
1000
1700
1200
1800
1950
1500
1499
1600
800
1600
800
1600
800
1600
800
2050
1100
1800
1300
1900
2100
1535
1535
1650
800
1650
800
1650
800
1650
800
2050
1100
1800
1300
1900
2100
1600
1638
1700
800
1700
800
1700
800
1700
800
2170
1100
1950
1300
2000
2200
1720
1720
1800
800
1800
800
1800
800
1800
800
1800
1842
1950
850
1950
850
1950
850
1950
850
1940
1937
2000
850
2000
850
2000
850
2000
850
2000
2047
2100
900
2100
900
2100
900
2100
900
2160
2160
2170
900
2170
900
2170
900
2170
900
2200
2250
2280
950
2280
950
2280
950
2280
950
2400
2400
2470
1000
2470
1000
2470
1000
2470
1000
2400
2453
2500
1000
2500
1000
2500
1000
2500
1000
2555
2555
2600
1000
2600
1000
2600
1000
2600
1000
3000
3000
3270
3270
3600
3600
DN
On request
09/2014
23
C22
T-Pieces DN 150/150 - 1200/650 PN 6, 10
Tee
Inspection piece
T-pieces consisting of pipe segments, standard lengths of main pipe and branch, other lengths on request. The branch can be
supplied with FW Coupling (FWC), flange coupling or inspection opening. Values are valid for both PN 6 and PN 10.
DN 1
DN 2
150
200
250
300
350
400
400
450
500
500
550
600
650
de2
[mm]
168
220
272
324
376
401
427
478
501
530
550
616
650
L2
400
400
400
400
400
400
400
450
450
500
500
550
550
de1
L 1 [mm]
[mm]
150
168
1000
200
220
1000
1000
250
272
1000
1000
1000
300
324
1000
1000
1000
1000
350
376
1000
1000
1000
1000
1500
400
401
1000
1000
1000
1000
1500
1500
400
427
1000
1000
1000
1000
1500
1500
1500
450
478
1000
1000
1000
1500
1500
1500
1500
1500
500
501
1000
1000
1000
1500
1500
1500
1500
1500
1500
500
530
1000
1000
1000
1500
1500
1500
1500
1500
1500
1500
550
550
1000
1000
1000
1500
1500
1500
1500
1500
1500
1500
1500
600
616
1000
1000
1000
1500
1500
1500
1500
1500
1500
1500
1500
1500
650
650
1000
1000
1000
1500
1500
1500
1500
1500
1500
1500
1500
1500
2000
700
718
1000
1000
1000
1500
1500
1500
1500
1500
1500
1500
2000
2000
2000
750
752
1000
1000
1500
1500
1500
1500
1500
1500
1500
1500
2000
2000
2000
800
820
1000
1000
1500
1500
1500
1500
1500
1500
1500
1500
2000
2000
2000
860
860
1000
1500
1500
1500
1500
1500
1500
1500
1500
1500
2000
2000
2000
900
924
1000
1500
1500
1500
1500
1500
1500
1500
1500
1500
2000
2000
2000
960
960
1000
1500
1500
1500
1500
1500
1500
2000
2000
2000
2000
2000
2000
1000
1026
1500
1500
1500
1500
1500
1500
1500
2000
2000
2000
2000
2000
2000
1100
1099
1500
1500
1500
1500
1500
1500
1500
2000
2000
2000
2000
2000
2000
1200
1229
1500
1500
1500
1500
1500
1500
1500
2000
2000
2000
2000
2000
2000

Tolerances to HOBAS Product Certificates
09/2014
24
C22
T-Pieces DN 1280/150 - 3600/650 PN 6, 10
Tee
Inspection piece
DN 2
150
200
250
300
350
400
400
450
500
500
550
600
650
de2
[mm]
168
220
272
324
376
401
427
478
501
530
550
616
650
L2
400
400
400
400
400
400
400
450
450
500
500
550
550
DN 1
de1
[mm]
1280
1280
1500
1500
1500
1500
1500
1500
1500
2000
2000
2000
2000
2000
2000
1348
1348
1500
1500
1500
1500
1500
1500
2000
2000
2000
2000
2000
2000
2000
1400
1434
1500
1500
1500
1500
1500
2000
2000
2000
2000
2000
2000
2000
2000
1500
1499
1500
1500
1500
1500
1500
2000
2000
2000
2000
2000
2000
2000
2000
1535
1535
1500
1500
1500
1500
2000
2000
2000
2000
2000
2000
2000
2000
2500
1600
1638
1500
1500
1500
1500
2000
2000
2000
2000
2000
2000
2000
2000
2500
1720
1720
1500
1500
1500
1500
2000
2000
2000
2000
2000
2000
2000
2000
2500
1800
1842
1500
1500
1500
2000
2000
2000
2000
2000
2000
2000
2000
2000
2500
1940
1937
1500
1500
1500
2000
2000
2000
2000
2000
2000
2000
2000
2500
2500
2000
2047
1500
1500
2000
2000
2000
2000
2000
2000
2000
2000
2000
2500
2500
2160
2160
1500
1500
2000
2000
2000
2000
2000
2000
2000
2000
2500
2500
2500
2200
2250
1500
1500
2000
2000
2000
2000
2000
2000
2500
2500
2500
2500
2500
2400
2400
1500
1500
2000
2000
2000
2000
2000
2500
2500
2500
2500
2500
2500
2400
2453
1500
1500
2000
2000
2000
2000
2000
2500
2500
2500
2500
2500
2500
L 1 [mm]
2555
2555
1500
1500
2000
2000
2000
2500
2500
2500
2500
2500
2500
2500
2500
3000*
3000
1500
1500
2000
2000
2500
2500
2500
2500
2500
2500
2500
3000
3000
3270*
3270
1500
1500
2000
2000
2500
2500
2500
2500
2500
2500
2500
3000
3000
3600*
3600
1500
2000
2000
2000
2500
2500
3000
3000
3000
3000
3000
3000
3000
* PN 10 on request
09/2014
25
C22
T-Pieces DN 700/700 - 3600/1600 PN 6, 10
Tee
Inspection piece
DN 1
DN 2
700
750
800
860
900
960
1000
1100
1200
1280
1348
1400
1500
1535
1600
de2
[mm]
718
752
820
860
924
960
1026
1099
1229
1280
1348
1434
1499
1535
1638
L2
550
650
700
700
800
800
850
900
950
1000
1050
1100
1200
1200
1300
de1
L 1 [mm]
[mm]
700
718
2000
750
752
2000
2000
800
820
2000
2000
2000
860
860
2000
2000
2000
2000
900
924
2000
2000
2000
2000
960
960
2000
2000
2000
2500
2500
2500
1000
1026
2000
2000
2000
2500
2500
2500
2500
1100
1099
2000
2000
2000
2500
2500
2500
2500
2500
1200
1229
2000
2500
2500
2500
2500
2500
2500
2500
3000
1280
1280
2000
2500
2500
2500
2500
2500
2500
2500
3000
3000
1348
1348
2000
2500
2500
2500
2500
2500
2500
2500
3000
3000
3000
1400
1434
2000
2500
2500
2500
2500
2500
2500
3000
3000
3000
3000
3500
1500
1499
2000
2500
2500
2500
2500
2500
2500
3000
3000
3000
3000
3500
3500
1535
1535
2500
2500
2500
2500
2500
2500
2500
3000
3000
3000
3000
3500
3500
3500
1600
1638
2500
2500
2500
2500
2500
2500
2500
3000
3000
3000
3500
3500
3500
3500
3500
1720
1720
2500
2500
2500
2500
2500
3000
3000
3000
3000
3000
3500
3500
3500
3500
3500
1800
1842
2500
2500
2500
2500
2500
3000
3000
3000
3000
3000
3500
3500
3500
3500
3500
1940
1937
2500
2500
2500
2500
2500
3000
3000
3000
3000
3000
3500
3500
3500
3500
3500
2000
2047
2500
2500
2500
2500
2500
3000
3000
3000
3000
3000
3500
3500
3500
3500
4000
2160
2160
2500
2500
2500
3000
3000
3000
3000
3000
3000
3500
3500
3500
3500
3500
4000
2200
2250
2500
2500
2500
3000
3000
3000
3000
3000
3000
3500
3500
3500
3500
3500
4000
2400
2400
2500
2500
2500
3000
3000
3000
3000
3000
3500
3500
3500
3500
3500
4000
4000
2400
2453
2500
2500
3000
3000
3000
3000
3000
3000
3500
3500
3500
3500
3500
4000
4000
2555
2555
2500
2500
3000
3000
3000
3000
3000
3000
3500
3500
3500
3500
4000
4000
4000
3000*
3000
3000
3000
3000
3000
3000
3000
3500
3500
3500
3500
3500
4000
4000
4000
4000
3270*
3270
3000
3000
3000
3000
3000
3000
3500
3500
3500
3500
3500
4000
4000
4000
4000
3600*
3600
3000
3000
3500
3500
3500
3500
3500
3500
4000
4000
4000
4000
4000
4000
4500
2500
* PN 10 on request
09/2014
26
C23
Reducers PN 6, 10
FITTINGS
Lengths for concentric reducers (PN 6 and PN 10). Project-related dimensions are to be coordinated with the HOBAS
Application Engineering Department in charge.
de1
de2
de2
de2
de2
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
168
900
168
1200
220
168
750
272
220
750
324
272
750
220
900
168
1000
376
324
750
272
900
220
1000
427
376
750
324
900
272
1000
220
1200
478
427
750
376
900
324
1000
272
1200
530
478
750
427
1000
376
1000
324
1200
550
530
750
478
1000
427
1000
376
1200
616
550
750
530
1000
478
1000
427
1200
650
616
750
550
1000
530
1000
478
1200
718
650
1000
616
1000
550
1200
530
1200
752
718
1000
650
1000
616
1200
550
1200
820
752
1000
718
1000
650
1200
616
1200
860
820
1000
752
1000
718
1200
650
1200
924
860
1000
820
1000
752
1200
718
1200
960
924
1000
860
1000
820
1200
752
1200
1026
960
1000
924
1000
860
1200
820
1500
1099
1026
1000
960
1000
924
1200
860
1500
1229
1099
1100
1026
1300
960
1500
924
1500
1280
1229
1100
1099
1300
1026
1500
960
1750
1348
1280
1100
1229
1300
1099
1500
1026
1750
1434
1348
1100
1280
1300
1229
1500
1099
1750
1499
1434
1100
1348
1300
1280
1500
1229
1750
1535
1499
1100
1434
1300
1348
1500
1280
1750
1638
1535
1200
1499
1300
1434
1500
1348
1750
1720
1638
1200
1535
1500
1499
1500
1434
1750
1842
1720
1200
1638
1500
1535
1750
1499
1750
1937
1842
1200
1720
1500
1638
1750
1535
2000
2047
1937
1200
1842
1500
1720
1750
1638
2000
2160
2047
1200
1937
1500
1842
1750
1720
2250
2250
2160
1500
2047
1500
1937
2000
1842
2250
2400
2250
1500
2160
1750
2047
2000
1937
2250
2453
2400
1500
2250
1750
2160
2000
2047
2250
2555
2453
1500
2400
1750
2250
2000
2160
2250
3000
2555
3270
3000
3600
3270
On request
09/2014
27
C24
Loose Flanges GRP / Steel PN 10
Flanges are made of either steel or GRP. The flange drilling complies with EN 1092-1 for PN 10.
GRP
de
d4
d2
[mm]
[mm]
[mm]
[mm]
[mm]
150
168
400
240
214
22
200
220
400
295
268
22
DN
Steel *
[mm]
[mm]
[mm]
[mm]
8 x M20
53
285
47
285
8 x M20
57
340
49
340
Screws
250
272
400
350
320
22
12 x M20
62
395
54
395
300
324
400
400
376
22
12 x M20
68
460
58
445
350
376
400
460
436
22
16 x M20
74
520
64
505
400
427
400
515
487
26
16 x M24
82
585
72
565
450
478
400
565
535
26
20 x M24
94
640
80
615
500
530
400
620
592
26
20 x M24
98
670
86
670
600
616
400
725
693
30
20 x M27
112
780
96
780
700
718
400
840
808
30
24 x M27
125
910
111
895
800
820
500
950
915
33
24 x M30
138
1025
124
1015
900
924
500
1050
1015
33
28 x M30
167
1125
147
1115
1000
1026
500
1160
1122
36
28 x M33
177
1255
160
1230
1200
1229
500
1380
1339
39
32 x M36
180
1484
173
1455

For project-related dimensions and torque settings please consult the HOBAS Application Engineering Department in charge.
* Flange ring based on EN 1092-1 /PN 10 up to DN 600, then according to HOBAS Specifications.
09/2014
28
C25
Fixed Flanges GRP PN 10

FLANGES
The fixed flange consists of a piece of pipe with the same pressure class as of the pipeline and a permanently fixed collar.
The given flange dimensions apply up to a nominal pressure of PN 10. The flange drilling complies with EN 1092-1
for PN 10.
de
DN
[mm]
L
[mm]
[mm]
[mm]
d2
[mm]
b
Screws
[mm]
150
168
400
285
240
22
8 x M20
23
200
220
400
340
295
22
8 x M20
25
250
272
400
395
350
22
12 x M20
28
300
324
400
445
400
22
12 x M20
32
350
376
400
505
460
22
16 x M20
36
400
427
400
565
515
26
16 x M24
40
450
478
400
640
565
26
20 x M24
44
500
530
400
670
620
26
20 x M24
48
600
616
400
780
725
30
20 x M27
54
700
718
400
895
840
30
24 x M27
61
800
820
500
1015
950
33
24 x M30
68
900
924
500
1115
1050
33
28 x M30
85
1000
1026
500
1230
1160
36
28 x M33
90
1200
1229
500
1484
1380
39
32 x M36
95
1400
1434
500
1685
1590
42
36 x M39
105

09/2014
29
C26
Blind Flanges GRP / Steel PN 10

FLANGES
Blind flanges are made of either GRP or galvanized steel. The flange drilling complies to EN 1092-1 for PN 10.
The image above shows a blind cover in combination with a fixed flange (C25). Combinations with loose flanges (C24)
are also possible.
GRP
de
d2
[mm]
[mm]
[mm]
[mm]
150
168
400
240
22
8 x M20
200
220
400
295
22
8 x M20
DN
Screws
Steel *
[mm]
[mm]
[mm]
[mm]
30
285
22
285
24
350
24
340
250
272
400
350
22
12 x M20
28
395
26
395
300
324
400
400
22
12 x M20
32
460
26
445
350
376
400
460
22
16 x M20
34
520
26
505
400
427
400
515
26
16 x M24
38
565
26
565
450
478
400
565
26
20 x M24
50
640
28
615
500
530
400
620
26
20 x M24
50
670
28
670
600
616
400
725
30
20 x M27
66
780
34
780
700
718
400
840
30
24 x M27
75
910
38
895
800
820
500
950
33
24 x M30
80
1025
42
1015
900
924
500
1050
33
28 x M30
100
1125
46
1115
1000
1026
500
1160
36
28 x M33
110
1255
52
1230
1200
1229
500
1380
39
32 x M36
120
1484
60
1455

* Flange cover based on EN 1092-1 /PN 10 up to DN 600, then according to HOBAS Specifications and depending on availability.
09/2014
30
D21
Utility Shafts
MANHOLES
12
10
1
3
5
11
HOBAS Utility Shafts consisting of:

1. Pipe shaft
2. Anti-buoyancy measure
3. Pipe socket (protective pipe)
4. Pressure pipe
5. Tee (joined with assembly couplings)
6. Aeration equipment
7. Flanged spigot
8. Slide valve with flanged joints
9. Laminated pipe shaft coupling (on multi-unit designs)
10. Ladder
11. Sump well
12. Manhole cover
Utility shafts consist of a HOBAS Shaft Pipe, a base plate and a floor channel. The pressure pipe leads through pipe sockets. The
annular space is sealed and impermeable to water. Depending on general conditions (manufacture, transportation, installation) the
shafts are produced in single or multiple units. Utility shafts are available with or without anti-buoyancy measure.
09/2014
31
D22
Pressure Release Shafts

MANHOLES
6
5
4
3
2
HOBAS Pressure Release Shaft consisting of:

1. Pipe shaft
2. Anti-buoyancy slab
3. Flanged inlet socket
4. Outlet
6. Ladder
7. Manhole cover
HOBAS Pressure Release Shafts are used for the transition of pressure pipelines into gravity pipelines. The outlet to the gravity
pipeline is designed below the crown of the incoming pressure pipe. Pressure Release Shafts have the same properties as HOBAS
Standard Shafts.
09/2014
32
D23
Pump Shafts
MANHOLES
7
4
6
1
HOBAS Pump Shaft consisting of:

1. Pipe Shaft
2. Anti-buoyancy measure
3. Inlet
4. Conduit with pressure pipeline and sealed annulus
5. Immersion pump
7. Conduit for steering and supply cable
8. Manhole cover
HOBAS Pump Shafts are used in wastewater engineering for overcoming larger differences in altitude. The size of the pump shaft
generally depends on the kind, size and number of pumps as well as the required storage capacity. The funnel-shaped design
provides almost deposit-free service. A conduit for the outgoing pressure pipe, the steering and supply cable can be pre-mounted if
requested. HOBAS Pump Shafts have the same properties as HOBAS Standard Shafts.
09/2014
33
E21

AKCESORIA
Masonry coupling, sanded, with pipe

ring, optionally with sealing tape
(TYPE A)
Masonry coupling, sanded, with

pipe ring and thrust ring,
optionally with sealing tape
(TYPE B)

pipe ring and collar, optionally
with sealing tape (TYPE C)
Masonry couplings are used to join pipes to concrete shafts or masonry structures. Lengths can be selected as required
in consideration of the pipe joint data. For data of pipe joints (DEC, LC) see datasheet B21.
DN
de
[mm]
[mm]
[mm]
[mm]
[mm]
150
168
50
80
200
220
50
80
250
272
50
10
80
300
324
50
11
80
350
376
50
12
80
400
401
50
13
80
400
427
50
13
80
450
478
50
14
80
500
501
50
15
80
500
530
50
15
80
550
550
50
16
80
600
616
50
17
80
650
650
50
19
80
700
718
50
19
80
750
752
50
21
80
800
820
80
10
22
80
860
860
80
10
23
80
900
924
80
10
25
80
960
960
80
10
25
100
1000
1026
80
12
27
100
09/2014
34
E21

AKCESORIA
Masonry coupling, sanded, with pipe

ring, optionally with sealing tape
(TYPE A)

pipe ring and thrust ring,
(TYPE B)

pipe ring and collar, optionally
with sealing tape (TYPE C)
Masonry couplings are used to join pipes to concrete shafts or masonry structures. Lengths can be selected as required
in consideration of the pipe joint data. For data of pipe joints (DEC, LC) see datasheet B21.
DN
de
[mm]
[mm]
[mm]
[mm]
[mm]
1100
1099
80
12
29
100
1200
1229
80
12
30
100
1280
1280
80
12
32
100
1348
1348
80
12
34
100
1400
1434
100
15
35
100
1500
1499
100
15
38
100
1535
1535
100
15
38
100
1600
1638
120
15
39
100
1720
1720
120
20
42
100
1800
1842
120
20
45
120
1940
1937
120
20
46
120
2000
2047
120
20
49
120
2160
2160
120
20
49
120
2200
2250
120
20
50
120
2400
2400
120
20
55
120
2400
2453
120
20
55
120
2555
2555
120
20
67
150
3000*
3000
150
20
67
150
3270*
3270
150
20
67
150
3600
On request
3600
* PN 10 on request
09/2014
35
E22

AKCESORIA
Structural adapter, sanded,

(TYPE F)
Structural adapter, sanded, with

thrust ring, optionally with sealing
tape (TYPE E)

collar, optionally with sealing tape
(TYPE G)
HOBAS Structural Adapters consist of a sanded pipe, on request also with a sealing tape, a thrust ring or masonry collar.
The standard length is 0.5 or 1 m up to DN 1100 and 0.5 or 1.5 m up to DN 1200, according to national standards. Other
lengths are available on request.
DN
de
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
150
168
50
80
500 / 1000
200
220
50
80
500 / 1000
250
272
50
10
80
500 / 1000
300
324
50
11
80
500 / 1000
350
376
50
12
80
500 / 1000
400
401
50
13
80
500 / 1000
400
427
50
13
80
500 / 1000
450
478
50
14
80
500 / 1000
500
501
50
15
80
500 / 1000
500
530
50
15
80
500 / 1000
550
550
50
16
80
500 / 1000
600
616
50
17
80
500 / 1000
650
650
50
19
80
500 / 1000
700
718
50
19
80
500 / 1000
750
752
50
21
80
500 / 1000
800
820
80
10
22
80
500 / 1000
860
860
80
10
23
80
500 / 1000
900
924
80
10
25
80
500 / 1000
960
960
80
10
25
100
500 / 1000
1000
1026
80
12
27
100
500 / 1000
09/2014
36
E22

AKCESORIA
Structural adapter, sanded,

(TYPE F)

thrust ring, optionally with sealing
tape (TYPE E)

collar, optionally with sealing tape
(TYPE G)
HOBAS Structural Adapters consist of a sanded pipe, on request also with a sealing tape, a thrust ring or masonry collar.
The standard length is 0.5 or 1 m up to DN 1100 and 0.5 or 1.5 m up to DN 1200, according to national standards. Other
lengths are available on request.
de
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
1100
1099
80
12
29
100
500 / 1000
1200
1229
80
12
30
100
500 / 1500
1280
1280
80
12
32
100
500 / 1500
1348
1348
80
12
34
100
500 / 1500
DN
1400
1434
100
15
35
100
500 / 1500
1500
1499
100
15
38
100
500 / 1500
1535
1535
100
15
38
100
500 / 1500
1600
1638
120
15
39
100
500 / 1500
1720
1720
120
20
42
100
500 / 1500
1800
1842
120
20
45
120
500 / 1500
1940
1937
120
20
46
120
500 / 1500
2000
2047
120
20
49
120
500 / 1500
2160
2160
120
20
49
120
500 / 1500
2200
2250
120
20
50
120
500 / 1500
2400
2400
120
20
55
120
500 / 1500
2400
2453
120
20
55
120
500 / 1500
2555
2555
120
20
67
150
500 / 1500
120
20
72
150
500 / 1500
3000*
3000
3270*
3270
3600
3600
On request
* PN 10 on request
09/2014
37
F21
Material Specifications
The laminate structure of HOBAS GRP Pipes may vary, depending on the requirements such as pressure class (PN), stiffness (SN) or
longitudinal tensile strength. The material specifications in the table is therefore simply to be regarded as a guideline. More accurate
material specifications for specific pipes on request.
Properties/long-term values:
The properties of the pipes, such as stiffness, ring deflection and longitudinal tensile strength are routinely checked as part of quality
assurance. Geometric properties, such as wall thickness, outside diameter and liner thickness, are measured and checked to internal
quality standards. Test procedures and regulations are defined in the applicable standards.
Information on long-term properties and other material tests, such as abrasion, hydraulic properties, chemical resistance, etc. is
available on request.
Properties for HOBAS GRP Pipes:
Material data
Orientation
Unit
Density
Circumferential
Longitudinal
~ 2000
kg/m
Tensile elastic modulus (at 23C)
MPa
10000 - 15000
Tensile strength (standard)
MPa
90 - 130
15 - 40
Tensile strength (locked design)
MPa
200
80 - 100
Tensile strain (at break): < PN 10
1.2 - 1.5
0.25
Tensile strain (at break): PN 10
1.8 - 2.0
1.0 - 1.4
~ 0.3
~ 0.25
Compressive elastic modulus (at 23C)
MPa
12000 - 18000
12000 - 18000
Compressive strength
MPa
130 - 140
90 - 100
1.2 - 1.5
1.8 - 2.0
MPa
10000 - 15000
MPa
120 - 140
15 - 40
Flexural strain (at break)
1.6 - 2.2
1.0
Circumferential strain at PN
0.2 - 0.3
Circumferential strain at 1.5 x PN
0.3 - 0.4
Temperature resistance
40 *
Chemical resistance (pH range)
pH
1 - 10 **
Thermal expansion coefficient
1/K
26 - 30 x 10-6
Thermal conductivity
W/(mK)
0.5 - 1.0
Heat capacity
J/(kgK)
1000-1400
Pressure wave propagation rate
m/s
~ 450
Roughness (to Colebrook White) k
mm
0.01 - 0.016
Poisson's ratio
Compressive strain (at break)

Flexural modulus
Flexural strength
10000 - 12000
*Temperature up to 80C on request

**Higher/lower pH on request
09/2014
38
Notes
HOBAS Engineering Austria

Pischeldorfer Strasse 128
9020 Klagenfurt | Austria
T +43.463.48 24 24
F +43.463.48 21 21
info@hobas.com
www.hobas.com
HOBAS Group Worldwide
HOBAS manufactures and markets HOBAS GRP Pipe
Systems. The HOBAS Network includes HOBAS Production Facilities and Sales Organizations in Europe and
throughout the world.
We develop and manufacture HOBAS Products conserving natures resources and with respect for our
environment. Visit our website to find out more about
the HOBAS Environmental Policy.

1409 HOBAS CC Pressure Pipe Systems Web

Uploaded by

Copyright:

Available Formats

1409 HOBAS CC Pressure Pipe Systems Web

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1409 HOBAS CC Pressure Pipe Systems Web

Uploaded by

Copyright:

Available Formats

h

Technical Product Data

HOBAS Pressure Pipe Systems

Air pipe systems

Features and advantages:

Low weight and simple jointing technology increase installation rate

Angle (bend, deflection)

de to product standard (EN 1796/EN 14364)

de to GRP and casting standards

de to GRP and PVC standards

de to GRP and steel standards

Pipe external diameter

Coupling external diameter

Pipe wall thickness

Ethylene propylene diene monomer rubber

Filament wound GRP coupling with full width EPDM gasket

Glass fiber reinforced plastic

Nitrile butadiene rubber

Pressure Pipes DN 150 - 1000 PN 6, 10

Pressure Pipes DN 1100 - 3600 PN 6, 10

Pressure Pipes DN 150 - 1000 PN 16, 20

Pressure Pipes DN 1100 - 3600 PN 16, 20

Pressure Pipes DN 150 - 1000 PN 25, 32

Restrained Pressure Pipes DN 200 - 1200 PN 6, 10

Jacking Pressure Pipes de 427 - 752 PN 6

Jacking Pressure Pipes de 820 - 1280 PN 6

Jacking Pressure Pipes de 1434 - 2047 PN 6

Jacking Pressure Pipes de 2160 - 3600 PN 6

Pressure Pipe Joints DN 150 - 1000 PN 6 - 32

Pressure Pipe Joints DN 1100 - 3600 PN 6 - 20

Restrained Pressure Pipe Joints PN 6, 10

Special Pressure Joints PN 6, 10, 16

Pressure Bends DN 150 - 1000 PN 6

Pressure Bends DN 1100 - 3600 PN 6

Pressure Bends DN 150 - 1000 PN 10

Pressure Bends DN 1100 - 3600 PN 10

T-Pieces DN 150/150 - 1200/650 PN 6, 10

T-Pieces DN 1280/150 - 3600/650 PN 6, 10

T-Pieces DN 700/700 - 3600/1600 PN 6, 10

Loose Flanges GRP / Steel PN 10

Fixed Flanges GRP PN 10

Blind Flanges GRP / Steel PN 10

Pressure Release Shafts

Masonry Couplings DN 150 - 1000

Masonry Couplings DN 1100 - 3600

Structural Adapters DN 150 - 1000

Structural Adapters DN 1100 - 3600

This version replaces all previous versions.

Pressure Pipes DN 150 - 1000 PN 6, 10

The standard pipe length is 6 m. Lengths of 1 / 2 / 3 m are available on request.

Wall thicknesses and masses are guidelines (plus tolerances).

Pressure Pipes DN 1100 - 3600 PN 6, 10

The standard pipe length is 6 m. Lengths of 1 / 2 / 3 m are available on request.

Wall thicknesses and masses are guidelines (plus tolerances).

Pressure Pipes DN 150 - 1000 PN 16, 20

The standard pipe length is 6 m. Lengths of 1 / 2 / 3 m are available on request.

Wall thicknesses and masses are guidelines (plus tolerances).

Pressure Pipes DN 1100 - 3600 PN 16, 20

The standard pipe length is 6 m. Lengths of 1 / 2 / 3 m are available on request.

Wall thicknesses and masses are guidelines (plus tolerances).