German DIN VDE Standards

Standard
DIN VDE 0100
DIN VDE 0100 Part 100
DIN VDE 0100 Part 410
DIN VDE 0100 Part 430
DIN VDE 0100 Part 482
DIN VDE 0100 Part 520
DIN VDE 0100 Part 530
DIN VDE 0100 Part 559
DIN VDE 0100 Part 701 to Part
705
DIN VDE 0100 Part 720
DIN VDE 0100 Part 726 to Part
738
DIN VDE 0101
DIN VDE 0105
DIN VDE 0107
DIN VDE 0108 Part 1 to Part 100
DIN VDE 0113
DIN VDE 0118
DIN VDE 0165
DIN VDE 0166
DIN VDE 0168
DIN VDE 0170/0171
DIN VDE 0185
DIN VDE 0207 Part 1 to Part 24
DIN VDE 0245 Part 1
DIN VDE 0245 Part 101 to Part
202
DIN VDE 0250 Part 1 to Part 819
DIN VDE 0253
DIN VDE 0262
DIN VDE 0265
DIN VDE 0266 Part 3 & 4
DIN VDE 0267
DIN VDE 0271
DIN VDE 0276 Part 603
DIN VDE 0276 Part 604
DIN VDE 0276 Part 604/605
DIN VDE 0276 Part 620
DIN VDE 0276 Part 1000

Title
Erection of power installations with rated voltages below 1000
General requirements, scope
Protective measures and protection against electric shock
Protection of cables against overcurrent
Choice of protective measures, protection against fire
Selection and erection of equipment - cable, wires and wiring systems
Erection electrical equipment - switch and controlgear
Luminaries and lighting equipment
Rooms containing a bath tub or shower basin. Roofed swimming pools and open air
swimming baths. Rooms containing electrical sauna-heaters - installations site.
Agricultural and horticultural premises
Fire-hazards locations
Lifting and hoisting devices. Laying of cables in hollow walls and in buildings made up
mainly of flammable building materials. Cable entries into buildings in public cable
network. Humid and wet areas, outdoor installation
Erection of power installations with rated voltages above 1000
Operation of power installations
Electrical installations in hospitals and locations for medical use outside hospitals
Power installations and safety power supply in communal facilities, stores and shops and
exhibitions rooms, multi-storey buildings, restaurants, closed car parks and working or
business premises
Electrical equipment of industrial machines
Erection of electrical installations in mines
Installation of electrical apparatus in hazardous areas
Electrical installations and apparatus thereof for use in atmospheres potentially
endangered by explosive material
Erection of electrical installations in open cast mines, quarries and similar plants
Electrical apparatus for potentially explosive atmospheres
Lightning protection system, protection of structures against lightning
Insulating and sheathing compounds for cables and flexible cords
Cables and cords for electrical and electronic equipment in power installations
Flexible PVC insulated control cable
Cables, wires and flexible cords for power installations
Heating - cables
XLPE (cross linked PE) insulated and PVC sheathed installations cable up to 0.6/1 kV
Cables with plastic-insulated lead-sheath for power installation
Halogen-free cables with improved characteristics in the case of fire, with reduced fire
propagation and continuance of isolation for use in the containment of nuclear power
plants
Halogen-free cables with improved characteristics in the case of fire, nominal voltages
from 6 up to 30kV
PVC insulated cables and sheathed power cables for rated voltages up to and including
3.6/6 (7.2) kV
Distribution cables of nominal voltages 0.6/1kV
Power cables of nominal voltages 0.6/1kV with special fire performance for use in power
stations
Additional test methods
Distribution cables of nominal voltages 3.6 to 20.8/36kV1kV
Current carrying capacity, general, conversion factors

www.battcables.de
Tel: +49 6131 6273874
Fax: +49 6131 6273875

Standard
DIN VDE 0276 Part 1001
DIN VDE 0277
DIN VDE 0281 Part 1 to Part 404
DIN VDE 0282 Part 1 to Part 808
DIN VDE 0284
DIN VDE 0289 Part1 to Part 101
DIN VDE 0292
DIN VDE 0293
DIN VDE 0295
DIN VDE 0298 Part 1 to Part 300
DIN VDE 0472 Part 1 to Part 818
DIN VDE 0473 up to Part 811
DIN VDE 0482 up to Part 268
DIN VDE 0800 Part 1 to Part 10
DIN VDE 0811
DIN VDE 0812
DIN VDE 0813
DIN VDE 0814
DIN VDE 0815
DIN VDE 0816 Part 1 to Part 3
DIN VDE 0817
DIN VDE 0818
DIN VDE 0839
DIN VDE 0881
DIN VDE 0891 Part 1 to Part 10
DIN VDE 0899 Part 1 to Part 5

Title
Tests on cables laid with nominal voltages 6/10kV, 12/20kV and 18/30kV with PVC
insulation, VPE insulation or paper insulation
Primary cables for airport lighting
PVC cables, wires and flexible cords for power installation
Rubber cables and flexible cords for power installation, heat-resistant silicon rubber
insulated cable, halogen-free insulated cable arc welding cables, rubber insulated lift
cables, rubber sheathed flexible cables
Mineral insulated cables with a rated voltage not exceeding 750V
Definitions for cables, wires and flexible cords for power installation
Code designation for harmonised cables and flexible cords for power installations
Core identification for cables and flexible cords used in power installations
Conductors of cables, wires and flexible cords for power installations
Application of cables and flexible cords in power installations
Testing of cables, wires and flexible cords
Insulating and sheathing materials of electric cables, common test methods
Measurement of smoke density of cables
Telecommunications
Ribbon cables with round conductors, with a pitch of 1.27mm
Equipment wires and stranded equipment wires of telecommunications systems
Switchboard cables for telecommunications systems
Cords for telecommunications systems
Wiring cables for telecommunications systems ( indoor cable)
Outdoor cables for telecommunications systems
Cables with stranded conductors for increased mechanical stress for telecommunications
systems
Self-supporting telecommunication aerial cables on overhead power lines above 1kV
Electromagnetic compatibility
Equipment wires and flexible equipment wires with extended temperature
Special directions and guiding principles of cables and insulated wires
Special specification for optical fibre, single core, indoor and outdoor cables

DIN 47613-4
DIN 54841-5
DIN EN 12548

Electrical apparatus for potentially explosive atmospheres for mining cable entries Part 1:
safety requirements and testing
Electrical apparatus for potentially explosive atmospheres for mining cable entries Part 2:
gland adaptors for entries; safety requirements and testing
Fire behaviour of building materials and elements - Fire resistance of electric cable
systems required to maintain circuit integrity - requirements and testing
Fire behaviour of building materials and elements -seals for cable penetrations; concepts,
requirements and testing
Cable distribution cubicle, cabinet, mounting dimensions
Cable distribution cubicle, base, mounting dimensions
Cable distribution cubicle, internal construction, mounting dimensions
Cable distribution cabinet with low construction depth
Cable lugs for compression connections, cover plate type, for copper conductors
Cable lugs for compression connections, ring type for aluminium conductors
Cable accessories, branch off sleeves for telecommunication cables, protected
underground couplings for sheathed cables
Cable accessories, branch off sleeves for telecommunication cables, cable clip
Plastic warning devices for underground cables and pipelines Part 5: cable cover
Lead & lead alloys - lead alloy ingots for electric cable sheathing and for sleeves

DIN EN 50289-1-13

Communication cables - specifications for test methods Part 1-13: electrical test methods

DIN 22419-1
DIN 22419-2
DIN 4102-12
DIN 4102-9
DIN 43629-1
DIN 43629-2
DIN 43629-3
DIN 43629-4
DIN 46235
DIN 46329
DIN 47613-2

DIN EN 50289-1-16
DIN EN 50289-3-11

Communication cables - specifications for test methods Part 1-16: electromagnetic

www.battcables.de
Tel: +49 6131 6273874
Fax: +49 6131 6273875

Standard
DIN EN 50289-3-15
DIN EN 50289-3-16
DIN EN 50289-3-5
DIN EN 50289-3-6
DIN EN 50289-3-7
DIN EN 50289-3-8
DIN 60966-1
DIN IEC 61196-1-101

DIN 89160

Title
Communication cables - specifications for test methods Part 3-15: mechanical test
methods, underwater cable resistance to hydrostatic pressure
Communication cables - specifications for test methods Part 3-16: mechanical test
methods, cable tensile performance
Communication cables - specifications for test methods Part 3-5: mechanical test
methods, crush resistance of the cable
Communication cables - specifications for test methods Part 3-6: mechanical test
methods, impact resistance
Communication cables - specifications for test methods Part 3-7: mechanical test
methods, abrasion resistance
Communication cables - specifications for test methods Part 3-6: mechanical test
methods, abrasion resistance of cable sheath markings
Radio frequency and coaxial assemblies Part 1: Generic specification, general
requirements and test methods
Coaxial communication cables Part 1-101: electrical test methods, test for conductor
resistance of cable
Electrical cables for ships and offshore units - single and mulitcore power cables with
extruded solid insulation without screen - type MGG, MGH, halogen free

www.battcables.de
Tel: +49 6131 6273874
Fax: +49 6131 6273875