Alloy Index

ALLOY INDEX
Index Terms
Links
A
16-25-6
broaching
197
density
246(T)
drilling hole sizes
199(T)
drilling speeds and feeds grouping
198(T)
dynamic modulus of elasticity
245(T)
electrical resistivity
247(T)
electron beam welding
173
forgeability rating
93(T)
forging temperature
93(T)
mean coefficient of thermal expansion
247(T)
melting range
246(T)
solid-solution-strengthened
specific heat capacity
tensile elongation
thermal conductivity
ultimate tensile strength
20
246(T)
13(T)
247(T)
13(T)
yield strength of disks as function of year of

availability
yield strength (0.2% offset)
343(F)
13(T)
17-22-A
temperature-strength capability as function of
year of availability
340(F)
Vac degassed, temperature-strength capability as

function of year of availability
340(F)
19-9DL
annealing
composition
density
137(T)
4(T)
246(T)
descaling
210
This page has been reformatted by Knovel to provide easier navigation.
Index Terms
Links
19-9DL (Cont.)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
247(T)
melting range
246(T)
246(T)
strengthening mechanisms (as modified stainless

steel)
26
stress relieving
137(T)
247(T)
tensile elongation
13(T)
13(T)
welding and zinc removal

210
13(T)
19-9W (AMS 5782), composition of filler metals

and electrode wires for arc welding
168(T)
A-286
aging cycles
aircraft applications
140(T)
91
annealing
137(T)
band sawing
190(T)
broaching
196(F)
bulge forming, speed for
110(T)
carbon pickup
143
cold reduction effect on hardness
106
cold work effect on yield strength
139(F)
composition
191(T)
107(F)
4(T)
composition of filler metals and electrode wires

for arc welding (AMS 5804)
168(T)
density
246(T)
draw forming, speed for
110(T)
drilling
190(T)
drilling hole sizes
199(T)
198(T)
191(T)
Index Terms
Links
A-286 (Cont.)
245(T)
247(T)
electric arc furnace/argon oxygen decarburization

with electroslag remelting
end milling
energy required for forging
eta phase precipitation
eta phase role in strengthening
45(T)
173
190(T)
191(T)
103
104
362(F)
225
face milling
190(F,T)
forgeability
92
forgeability rating
93(T)
forging, aircraft turbine shaft
99(F)
forging, design guides
95(T)
forging temperature
93(T)
forging temperature range
111(F)
forming, directionality in bulging
109(F)
324(T)
incipient melting temperature
324(T)
liquating phase for liquation cracking
159(T)
191
247(T)
melting range
246(T)
microstructural degradation
192
329
mill product availability
77
precipitation hardening
214
reaming
102(T)
26
gamma prime solvus temperature
machinability
102(T)
103
forming by spinning from a roll forging
gamma prime precipitation for strength
191(T)
190(T)
reduction rate during forging
102
restraint fixturing for heat treatment
145
191(T)
rupture strength vs. Larson-Miller

parameter
248(F)
rupture strength vs. temperature
243(F)
solution treating cycles
140(T)
Index Terms
Links
A-286 (Cont.)
solution treating temperature
147
246(T)
straddle milling
190(T)
stress relieving
137(T)
stress-rupture strength
tapping
tensile elongation
191(T)
14(T)
19(F)
190(T)
191(T)
13(T)
tensile forming, speed for
110(T)
247(T)
threading
190(T)
191(T)
turning
190(T)
191(T)
195
13(T)
useable temperature, versus Al/Ti ratio in PC

castings
216(T)
vacuum induction melting with electroslag

remelting
45(T)
vacuum induction melting with vacuum arc

remelting
45(T)
weldability
153
welding
151

availability
343(F)
13(T)
AF 21DA
119
machinability ranking
192
AF21DA-6, composition of P/M

superalloys
120(T)
AF 56 (SX 792)
composition
273(T)
density
273(T)
AF 115
composition of P/M superalloys
AF 1753, carbide formation
119
120(T)
37
Index Terms
Links
AiResist 13
composition
7(T)
drilling hole sizes
199(T)
198(T)
19(F)
tensile elongation
17(T)
17(T)
17(T)
21(F)
AiResist 213
composition
7(T)
drilling hole sizes
199(T)
198(T)
19(F)
tensile elongation
13(T)
13(T)
13(T)
AiResist 215
composition
7(T)
drilling hole sizes
199(T)
198(T)
19(F)
tensile elongation
17(T)
17(T)
17(T)
21(F)
AM1
composition
273(T)
density
273(T)
AM3
composition
273(T)
density
273(T)
hot isostatic pressing effect on high-cycle

fatigue (SCDS)
279(F)
AMS 5782. See also 19 9W.

for arc welding
168(T)
Index Terms
Links
AMS 5794. See also Multimet.

for arc welding
168(T)
AMS 5796. See also Haynes 25 (HS-25, L-605).

for arc welding
168(T)
AMS 5800. See also

for arc welding
168(T)
AMS 5804. See also A-286.

for arc welding
168(T)
AMS 5828C. See also Waspaloy.

for arc welding
168(T)
AP-1, fatigue crack growth rate, grain size

effect
254
256(F)
ASTM A297 grade HC

drilling hole sizes
199(T)
198(T)
ASTM A297 grade HD

drilling hole sizes
199(T)
198(T)
ASTM A297 grade HE

drilling hole sizes
199(T)
198(T)
ASTM A297 grade HF

drilling hole sizes
199(T)
198(T)
ASTM A297 grade HH

drilling hole sizes
199(T)
198(T)
ASTM A297 grade HI

drilling hole sizes
199(T)
198(T)
Index Terms
Links
ASTM A297 grade HK

drilling hole sizes
199(T)
198(T)
ASTM A297 grade HL

drilling hole sizes
199(T)
198(T)
ASTM A297 grade HN

drilling hole sizes
199(T)
198(T)
ASTM A297 grade HP

drilling hole sizes
199(T)
198(T)
ASTM A297 grade HT

drilling hole sizes
199(T)
198(T)
ASTM A297 grade HV

drilling hole sizes
199(T)
198(T)
ASTM A297 grade HW

drilling hole sizes
199(T)
198(T)
ASTM A297 grade HX

drilling hole sizes
199(T)
198(T)
ASTM A351 grade HK-30

drilling hole sizes
199(T)
198(T)
ASTM A351 grade HK-40

drilling hole sizes
199(T)
198(T)
ASTM A351 grade HT-30

drilling hole sizes
199(T)
198(T)
ASTM A608 grade HD50

drilling hole sizes
199(T)
198(T)
Index Terms
Links
ASTM A608 grade HE35

drilling hole sizes
199(T)
198(T)
ASTM A608 grade HF30

drilling hole sizes
199(T)
198(T)
ASTM A608 grade HH30

drilling hole sizes
199(T)
198(T)
ASTM A608 grade HH33

drilling hole sizes
199(T)
198(T)
ASTM A608 grade HI35

drilling hole sizes
199(T)
198(T)
ASTM A608 grade HK30

drilling hole sizes
199(T)
198(T)
ASTM A608 grade HK40

drilling hole sizes
199(T)
198(T)
ASTM A608 grade HL30

drilling hole sizes
199(T)
198(T)
ASTM A608 grade HL40

drilling hole sizes
199(T)
198(T)
ASTM A608 grade HN40

drilling hole sizes
199(T)
198(T)
ASTM A608 grade HT50

drilling hole sizes
199(T)
198(T)
ASTM A608 grade HU50

drilling hole sizes
199(T)
198(T)
Index Terms
Links
ASTM A608 grade HW50

drilling hole sizes
199(T)
198(T)
ASTM A608 grade HX50

drilling hole sizes
199(T)
198(T)
Astroloy. See also Udimet 700 (U-700).

aerospace applications
120(T)
aging cycles
140(T)
aging rate
156(F)
annealing
cobalt addition effect
composition
91
96
97(F)
199(F)
200
137(T)
240
5(T)
cyclic fatigue behavior vs. mesh size

reduction
124
density
246(T)
drilling
198
drilling hole sizes
199(T)
198(T)
247(T)
elongation
249(T)

extrusion
fatigue crack growth rate, grain size effect
104
76
254
256(F)
forgeability affected by nitrogen and oxygen

content
104
forgeability and elevated-temperature

strength
forgeability rating
forgeability vs. hardener content
forged aircraft components
103
93(T)
103(T)
96
95(T)
forging developments
347
forging, development time requirement
104
forging temperature
102(T)
93(T)
97(F)
102(T)
118
Index Terms
Links
Astroloy (Cont.)
grain size
hot cracking during forging
249(T)
101
hot isostatic pressed (as-HIP), aircraft

applications
119
inertia bonding
175
low-cycle fatigue strength
252
247(T)
melting range
246(T)
powder metallurgy/isothermal forging
powder metallurgy processing
reduction in area
329
28
119
249(T)
102
242(F)
140(T)
246(T)
strain-controlled low-cycle fatigue properties,

wrought
strengthening mechanisms
stress relieving
superplastic forging
253(F)
28
137(T)
14(T)
114

tensile elongation
U-700 as variant of
340(F)
12(T)
247(T)
12(T)
249(T)
239
12(T)
249(T)
HIP Astroloy, strain-controlled low-cycle fatigue

properties
253(F)
LC Astroloy
119
120(T)
elongation
249(T)
Index Terms
Links
LC Astroloy (Cont.)
324(T)
grain size
249(T)
hub material for dual-alloy turbine wheel

concept
119
324(T)
as P/M turbine disk alloys
127
prior particle boundaries corrected
119
reduction in area
249(T)
249(T)
vacuum (soluble gas) atomization process

122
123(F)
249(T)
B
B-1900
aging cycles
141(T)
261
aircraft applications, investment

casting
Al-Si coated, creep-rupture behavior
89
264(F)
carbide precipitation
224
casting techniques lacking cost benefit
267
362(F)
columnar grain directionally solidified, creep

behavior
270(F)
columnar grain directionally solidified,

elongation vs. temperature
composition
279(F)
6(T)
creep behavior
269
creep elongations
263
creep-rupture strength
261
density
262(T)
drilling hole sizes
199(T)
198(T)
ductility of cast version

270(F)
264(F)
263
261(T)
95(T)
Index Terms
Links
B-1900 (Cont.)
hafnium addition effect
hot corrosion
hot corrosion resistance
325(T)
237
302(F)
308
289
hot corrosion resistance from alloying

elements
hot corrosion resistance lacking
hot corrosion testing
304
261
292(F)
hot corrosion testing, specimen weight

change
hot isostatic pressing
292(F)
265
325(T)
262(T)
mechanical properties of cast airfoils vs. cast test

bars
230
melting range
231(F)
262(T)
microstructural degradation with

overheating
microstructure, carbides present
328(F)
36(F)
microstructures after various heat treatments for

217(F)
molybdenum effect in hot corrosion
303
oxidation
297
polycrystalline, creep behavior
270(F)
polycrystalline, elongation vs.

temperature
279(F)
264(F)
141(T)
specific heat
262(T)
stress-rupture curve
259(F)
18(T)
19(F)
20(F)
341(F)
350(F)
substituted for U-700 to prevent TMF

cracking
332

340(F)
Index Terms
Links
B-1900 (Cont.)
tensile elongation
16(T)
262(T)
16(T)
variations developed
342
weld repair of
336
yield strength
239
16(T)
B-1900+Hf
aging cycles
141(T)
325(T)
325(T)
mechanical properties, cast test bars vs. cast

airfoils
230
141(T)

B-1910, wrought variant of B-1900, rolling
341(F)
76
C
C263
75(F)
76
combustor applications
75(F)
76
composition
creep strength vs. temperature
sheet product applications
sheet products
yield strength vs. temperature
5(T)
75(F)
76
77
75(F)
76
91
75(F)
76
Cabot 214
14(T)
tensile elongation
12(T)
12(T)
12(T)
CG-27, stress-rupture strength
19(F)
Index Terms
Links
CM-186LC
as columnar grain directionally solidified
alloy
cost
267
349
creep strength
272(F)
260(F)
CM-247 (Ren 108) as columnar grain

directionally solidified alloy
267
CM-247LC (CGDS)
creep behavior
272
creep strength
272(F)
developed to eliminate grain-boundary

cracking
267
260(F)
CMSX-2 (SCDS)
aging cycles
compliance constants vs. temperature
composition
density
141(T)
240
273(F)
6(T)
273(T)
273(T)
fracture toughness for aerospace

applications
286
low-cycle fatigue behavior, thermal solidification

gradient, orientation and HIP effects
280
281(F)
as single-crystal directionally-solidified
alloy
267
141(T)
18(T)

350(F)
tensile elongation
17(T)
17(T)
17(T)
CMSX-2/3 (SCDS)
creep behavior
272
260(F)
Index Terms
Links
CMSX-3 (SCDS)
composition
273(T)
density
273(T)
325(T)
325(T)
CMSX-4 (SCDS)
composition
6(T)
creep strength
272(F)
density
273(T)
273(T)
fracture toughness for aerospace

applications
286
as single-crystal directionally solidified

alloy
temperature range compared to CMSX-10
267
349

350(F)
CMSX-6 (SCDS)
composition
density
240
6(T)
273(T)
273(T)

alloy
267
CMSX-10 (SCDS)
composition
6(T)
creep strength
272(F)
density
273(T)
273(T)

alloy
267
temperature range and creep-rupture

strength
349

350(F)
CMSX-11B (SCDS)
composition
273(T)
density
273(T)
Index Terms
Links
CMSX-11C (SCDS)
composition
273(T)
density
273(T)
CRM-6D, stress-rupture strength

Custom Age 625 PLUS, composition
19(F)
5(T)
D
D-6ac, face milling
190(F)
D-31 (Nb), face milling
190(F)
D-979
139(F)
density
246(T)
245(T)
247(T)
247(T)
melting range
246(T)
242(F)
246(T)
14(T)
tensile elongation
12(T)
19(F)
247(T)
12(T)
12(T)
Discaloy
aging cycles
140(T)
annealing
137(T)
composition
4(T)
density
246(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
247(T)
melting range
246(T)
243(F)
140(T)
Index Terms
Links
Discaloy (Cont.)
246(T)
stress relieving
137(T)
14(T)
tensile elongation
13(T)
247(T)
13(T)
13(T)
DS 002
columnar grain directionally solidified, temperaturestrength capability as function of year of
availability, turbine blade alloys
343(F)
single-crystal directionally solidified, temperaturestrength capability as function of year of

availability, turbine blade alloys
343(F)
E
Elgiloy
density
246(T)
247(T)
247(T)
melting range
246(T)
246(T)
tensile elongation
13(T)
247(T)
13(T)
13(T)
F
FSX-414
composition
density
7(T)
262(T)
hot corrosion
308
262(T)
melting range
262(T)
specific heat
262(T)
Index Terms
Links
FSX-414 (Cont.)
259(F)
18(T)
tensile elongation
17(T)
262(T)
17(T)
yie ld strength (0.2% offset)
17(T)
G
GMR 235
for arc welding
168(T)
173
as filler metal for IN-718 welds
167
friction welding
175
18(T)
tensile elongation
17(T)
17(T)
17(T)
169
Greek Ascoloy
19(F)

340(F)
H
Hastelloy B
composition
4(T)
drilling hole sizes
199(T)
198(T)
173

350(F)
Hastelloy B-2
drilling hole sizes
199(T)
198(T)
Index Terms
Links
Hastelloy C
drilling hole sizes
199(T)
198(T)
sheet
elongation
284(T)
reduction in area
284(T)
tensile strength
284(T)
yield strength
284(T)
Hastelloy C-22
tensile elongation
12(T)
12(T)
12(T)
Hastelloy C-276
composition
4(T)
drilling hole sizes
199(T)
198(T)

45(T)
Hastelloy G-30
tensile elongation
12(T)
12(T)
12(T)
Hastelloy N
composition
Hastelloy R-235, intergranular attack
4(T)
173
295(F)
Hastelloy S
aging cycles
140(T)
composition
4(T)

for arc welding
168(T)
density
246(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
Index Terms
Links
Hastelloy S (Cont.)
as filler metal (AMS 5838), base metals
involved
167
as filler metal (AMS 5838) for IN-718

welds
167
247(T)
melting range
246(T)
mill annealing minimum temperature
160(T)
solution annealing temperature range
160(T)
140(T)
246(T)
14(T)
tensile elongation
12(T)
247(T)
12(T)
12(T)
Hastelloy W
composition
4(T)
forgeability rating
93(T)
forging temperature
93(T)
Hastelloy X
aging cycles
140(T)
75(F)
anisotropy
108(T)
annealing
137(T)
363(F)
76
carbides and overheating effect on mechanical

properties
326(F)
chromium content in alloy (%)
304(T)
107(F)
composition
cost advantage
density
75(F)
76
4(T)
6(T)
77
75(F)
76
246(T)
descaling
210
Index Terms
Links
Hastelloy X (Cont.)
diffusion welding
174
drilling hole sizes
199(T)
198(T)
245(T)
247(T)

Ericksen cup depth
45(T)
173
108(T)
forgeability rating
93(T)
95(T)
forging temperature
93(T)
forming and slotting
108(T)
324(T)
146
hot corrosion
302(F)
304(T)
324(T)
intergranular attack
295(F)
159(T)
machinability
193
manufacturing ratings
194(T)
manufacturing time for part production
194(T)
247(T)
melting range
246(T)
microstructure, carbide precipitation
329
160(T)

Olsen cup depth
orange peel in forming
oxide penetration
102(T)
112
forming characteristics
heat treatment
102(T)
330(F)
77
108(T)
107
295(F)
213
102
rupture strength of wrought solid-solutionThis page has been reformatted by Knovel to provide easier navigation.
Index Terms
Links
Hastelloy X (Cont.)
strengthened nickel-base superalloys vs.
temperature
244(F)
242(F)
75(F)
sheet products
91
solid-solution strengthened
28
160(T)
140(T)
246(T)
stress relieving
137(T)
14(T)
76
19(F)

340(F)
tensile elongation
12(T)
tensile elongation vs. cold work for sheet
76(F)
UNS number
247(T)
12(T)
108(T)
12(T)
yield strength (0.2% offset) vs. cold work for

sheet
76(F)
75(F)
76
Haynes alloys
density
246(T)
melting range
246(T)
246(T)
Haynes 21 (HS -21)

composition
7(T)
drilling hole sizes
199(T)
198(T)
173
18(T)
19(F)
21(F)

350(F)
Index Terms
Links
Haynes 25 (HS -25, L-605)

aging cycles
alloying elements effect on formability
140(T)
106
annealing
137(T)
band sawing
191(T)
brazing
183

composition
184(T)
110(T)
223
329
304(T)
4(T)
7(T)

for arc welding
density
168(T)
246(T)
descaling
208
110(T)
drilling
191(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
end milling
191(T)
explosive forming
113(F)
face milling
191(T)
as filler metal for welding

forgeability rating
forging
151
93(T)
104
forging temperature
G-ratio
93(T)
324(T)
193
304(T)
324(T)
machinability
193
192
194(T)
194(T)
247(T)
Index Terms
Links
Haynes 25 (HS -25, L-605) (Cont.)

melting range
246(T)
160(T)
77
213
reaming
191(T)

parameter
sheet products
248(F)
243(F)
91
160(T)
140(T)
246(T)
straddle milling
191(T)
stress relieving
tapping
29
137(T)
14(T)
19(F)
21(F)
191(T)
tensile elongation
13(T)
76(F)
110(T)
247(T)
threading
191(T)
turning
191(T)
13(T)
13(T)

sheet
Haynes 31, mill product availability
76(F)
77
Haynes 95 (N-155)
annealing
137(T)
stress relieving
137(T)
Haynes 150
density
246(T)
245(T)
247(T)
Index Terms
Links
Haynes 150 (Cont.)

247(T)
melting range
246(T)
246(T)
14(T)
tensile elongation
13(T)
247(T)
13(T)
13(T)
Haynes 151 (HS -151), stress-rupture

strength
19(F)
21(F)
Haynes 188
aging cycles
140(T)
75(F)
76
aircraft applications, components in F-100

engines
alloying elements effect on formability
anisotropy
composition
76(T)
106
108(T)
106
107(F)
75(F)
76
4(T)

for arc welding
168(T)
creep-buckling resistance
76(T)
creep life
76(T)
75(F)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
Eric ksen cup depth
108(T)
forgeability rating
93(T)
forging temperature
93(T)
108(T)
324(T)
higher-temperature alternative to Hastelloy X
76
77
Index Terms
Links
Haynes 188 (Cont.)

high-temperature strength
76(T)
hot corrosion
302(F)
324(T)
lanthanum inclusions, effect on oxidation

297
76(T)
247(T)
microstructure, carbide precipitation after

overheating
Olsen cup depth
oxidation resistance
327(F)
160(T)
77
108(T)
76(T)
oxidation resistance improved by aluminide

coating
314

parameter
sheet products
248(F)
243(F)
75(F)
76
91
160(T)
140(T)
14(T)

340(F)
tensile elongation
13(T)
76(F)
247(T)
thermal fatigue
76(T)
13(T)
UNS number
welding
108(T)
151
13(T)

sheet
76(F)
75(F)
76
Index Terms
Links
Haynes 214
alloying elements effects on formability
composition
106
107(F)
4(T)
77
Haynes 230
106
anisotropy
108(T)
107(F)
composition
4(T)
density
246(T)
245(T)
247(T)
Ericksen cup depth
108(T)
108(T)
247(T)
melting range
246(T)
160(T)
Olsen cup depth
108(T)
160(T)
246(T)
14(T)
tensile elongation
12(T)
76(F)
UNS number
247(T)
12(T)
108(T)
12(T)

sheet
76(F)
Haynes 242, composition
5(T)
Haynes 263, composition
5(T)
Haynes 556
aging cycles
140(T)
composition
4(T)

Index Terms
Links
Haynes 556 (Cont.)

for arc welding
168(T)
density
246(T)
245(T)
247(T)
247(T)
melting range
246(T)
140(T)
246(T)
14(T)
tensile elongation
13(T)
247(T)
13(T)
13(T)
Haynes 1002
density
262(T)
261(T)
262(T)
melting range
262(T)
specific heat
262(T)
tensile elongation
17(T)
262(T)
17(T)
17(T)
Haynes HR-120, composition
4(T)
Haynes HR-160, composition
4(T)
Haynes R-41, composition
5(T)
Haynes Stellite 31 (HS -31, X-40). See also

X-40
grinding fluid effect on grinding ratio
1
173
202(T)
HIP Astroloy. See entry after Astroloy.
I
IN-120, magnesium addition effect on stressrupture behavior
238(T)
Index Terms
Links
IN-162
density
262(T)
261(T)
262(T)
melting range
262(T)
specific heat
262(T)
18(T)
tensile elongation
16(T)
262(T)
16(T)
16(T)
IN 591, temperature-strength capability as function

of year of availability
350(F)
IN-731
density
262(T)
262(T)
melting range
262(T)
specific heat
262(T)
18(T)
tensile elongation
16(T)
262(T)
16(T)
16(T)
IN 935, temperature-strength capability as function

350(F)
IN-939
aging cycles
141(T)
227
cast in case-type components
348
hot corrosion
308
307
for industrial and marine turbines
263
oxidation, amorphous silica effect

oxidation-resistance potential
261
351(F)
351
141(T)
18(T)
Index Terms
Links
IN-939 (Cont.)
350(F)
tensile elongation
17(T)
17(T)
17(T)
IN 6201, temperature-strength capability as

350(F)

350(F)

350(F)
Inco alloy 330

241
rupture strength of wrought solid-solutionstrengthened nickel-base superalloys vs.

temperature
244(F)
INCO 728
292(F)

change
292(F)
Incoloy 800
annealing
137(T)
107(F)
composition
4(T)
density
246(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
247(T)
melting range
246(T)

temperature
244(F)
246(T)
Index Terms
Links
Incoloy 800 (Cont.)

stress relieving
137(T)
14(T)
tensile elongation
13(T)
247(T)
13(T)
13(T)
Incoloy 800H
annealing
composition
strengthening mechanis ms
stress relieving
137(T)
4(T)
26
137(T)
Incoloy 800HT
composition
4(T)

temperature
244(F)
Incoloy 801
composition 4(T)
density
246(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
247(T)
melting range
246(T)
246(T)
14(T)
tensile elongation
13(T)
247(T)
13(T)
13(T)
Incoloy 802
composition
4(T)
density
246(T)
drilling hole sizes
199(T)
Index Terms
Links
Incoloy 802 (Cont.)

198(T)
245(T)
247(T)
247(T)
melting range
246(T)

temperature
244(F)
246(T)
14(T)
tensile elongation
13(T)
247(T)
13(T)
13(T)
Incoloy 807
density
246(T)
245(T)
247(T)
247(T)
melting range
246(T)
246(T)
14(T)
tensile elongation
13(T)
247(T)
13(T)
13(T)
Incoloy 825
annealing
137(T)
density
246(T)
247(T)
247(T)
melting range
246(T)
246(T)
stress relieving
137(T)
tensile elongation
13(T)
Index Terms
Links
Incoloy 825 (Cont.)

247(T)
13(T)
13(T)
Incoloy 901
annealing
composition
137(T)
5(T)
drilling hole sizes
199(T)
198(T)
fine grain, temperature-strength capability as

forgeability rating
forging, grain-size variations
forging temperature
high-cycle fatigue, grain size effect
340(F)
93(T)
104
93(T)
26
257(T)
high-cycle fatigue, surface

condition effect
257(T)
low-cycle fatigue, grain size effect
251
192
329
214
stress relieving
252(T)
137(T)
19(F)

340(F)
Incoloy 903
composition
4(T)
density
246(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
247(T)
melting range
246(T)
246(T)
Index Terms
Links
Incoloy 903 (Cont.)

14(T)
tensile elongation
13(T)
247(T)
13(T)
13(T)
Incoloy 904
density
246(T)
247(T)
247(T)
melting range
246(T)
246(T)
247(T)
Incoloy 907
composition
4(T)
density
246(T)
245(T)
247(T)
247(T)
melting range
246(T)
246(T)
tensile elongation
13(T)
247(T)
13(T)
13(T)
Incoloy 909
composition
4(T)
density
246(T)
247(T)
247(T)
melting range
246(T)
246(T)
28
14(T)
tensile elongation
13(T)
247(T)
Index Terms
Links
Incoloy 909 (Cont.)

13(T)
13(T)
Incoloy 925
composition
4(T)

45(T)
Incoloy MA-956
brazing
183
as common ODS alloy
129
composition
129(T)
132
243(F)
244(F)
drilling hole sizes
199(T)
198(T)
250(T)
elongation (%)
250(T)
grain structure
132
heat treatment industry applications
133
mean coefficient of thermal expansion at

538 C
250(T)
melting range
250(T)
1000h rupture strength
250(T)
product forms available
132(T)
reduction in area at 1095C
250(T)

temperature
sheet form available
244(F)
243(F)
132
specific heat capacity at 21 C
250(T)
thermal conductivity at 21 C
250(T)
250(T)
yield strength
250(T)
Inconel alloys
descaling
development
208(T)
1
339
Index Terms
Links
Inconel alloys (Cont.)

nitrogen pickup
143(F)
sheet products
91
20
Inconel 82, as filler metal for IN-718 welds
167
Inconel 100 (IN -100)

120(T)
aging cycles
141(T)
261
aircraft applications, investment casting
89
applications, high-temperature
23
availability
342
casting techniques lacking cost benefit
267
centrifugal atomization for P/M processing
122
304(T)
chromium content low for turbine disk

applications
344
240
columnar grain directionally solidified, creep

behavior
270(F)

composition
279(F)
5(T)
6(T)
120(T)
creep behavior
269
270(F)
data compilation
261
263
density
262(T)
drilling
200
drilling hole sizes
199(T)
198(T)
261(T)
elongation
249(T)
104
forging temperatures
102
gamma-gamma prime eutectic, white islands

of
360(F)
Index Terms
Links
Inconel 100 (IN -100) (Cont.)

gamma prime solvus temperature.
324(T)
325(T)
242(F)
264(F)
gatorized, rupture strength vs.

temperature
grain size
G-ratio
249(T)
193
hot corrosion
302(F)
308
289
304(T)

elements
304
292(F)

change
machinability
292(F)
324(T)
325(T)
192
262(T)

airfoils
melting range
230
262(T)
329
Mod, temperature-strength capability as function

physical property data not available
340(F)
241
270(F)
polycrystalline, elongation vs.

temperature
279(F)
polycrystalline, temperature-strength capability as

function of year of availability, turbine blade
alloys
343(F)
powder metallurgy form, yo-yo heat

treatment
217
28
117
powder metallurgy processing and forging
102
as powder metallurgy turbine disk alloys
127
119
342
powder processing with superplastic

Index Terms
Links

forming
115
214
reduction in area
249(T)
264(F)
sigma phase formation
362(F)
141(T)
specific heat
262(T)
strain-controlled low-cycle fatigue

properties
253(F)
259(F)
18(T)
19(F)
20(F)
340(F)
341(F)
350(F)

tensile elongation
16(T)
tensile strength, and conversion from cast to

wrought form
tensile strength, cast vs. wrought forms
243
227
tensile yield strength
278(F)
262(T)
16(T)
249(T)
122
123(F)
vacuum (soluble gas) atomization

process
vanadium effect in hot corrosion
303
yield strength
239
16(T)
249(T)
Inconel 102
composition
5(T)
drilling hole sizes
199(T)
198(T)
magnesium addition effect on creep rupture

life
238
Inconel 117, composition of filler metals and

electrode wires for arc welding
168(T)
272(F)
Index Terms
Links
Inconel 587
245(T)
14(T)
tensile elongation
12(T)
12(T)
12(T)
Inconel 596, dynamic modulus of

elasticity
245(T)
Inconel 597
density
246(T)
247(T)
247(T)
melting range
246(T)
246(T)
14(T)
tensile elongation
12(T)
247(T)
12(T)
12(T)
Inconel 600
aging cycles
140(T)
annealing
137(T)
bar, elongation
284(T)
bar, reduction in area
284(T)
bar, tensile strength
284(T)
bar, yield strength
284(T)
brazing
182

composition
density
107(F)
4(T)
246(T)
descaling
210
diffusion welding
174
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
Index Terms
Links
Inconel 600 (Cont.)

electric arc furnace/argon oxygen
decarburization with electroslag
remelting
45(T)
173
filler metals used for welds
167
forgeability
104
forgeability rating
93(T)
forging temperature
93(T)
159(T)
247(T)
melting range
246(T)

temperature
244(F)
242(F)
140(T)
246(T)
stress relieving
137(T)
14(T)

tensile elongation
340(F)
12(T)
247(T)
12(T)
12(T)
Inconel 601
aging cycles
140(T)
annealing
137(T)
composition
4(T)

for arc welding
168(T)
density
246(T)
drilling hole sizes
199(T)
198(T)
245(T)
Index Terms
Links
Inconel 601 (Cont.)

247(T)
247(T)
melting range
246(T)

temperature
244(F)
242(F)
140(T)
246(T)
stress relieving
137(T)
14(T)
tensile elongation
12(T)
247(T)
12(T)
12(T)
Inconel 617
aging cycles
140(T)
75(F)
76
75(F)
76
composition
4(T)
composition of filler metals and electrode

wires for arc welding
168(T)
75(F)
density
246(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
324(T)
324(T)
247(T)
melting range
246(T)
microstructure, incipient melting effect
326(F)
160(T)
76
77
Index Terms
Links
Inconel 617 (Cont.)

temperature
244(F)
75(F)
160(T)
140(T)
246(T)
14(T)
tensile elongation
12(T)
76
247(T)
12(T)
12(T)
75(F)
76
Inconel 625
aging cycles
140(T)
anisotropy
108(T)
annealing
137(T)
cast, density
262(T)
cast, mean coefficient of thermal

expansion
262(T)
cast, melting range
262(T)
cast, specific heat
262(T)
cast, thermal conductivity
262(T)
composition
4(T)
density
246(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)

45(T)
173
Ericksen cup depth
108(T)
108(T)
324(T)
Index Terms
Links
Inconel 625 (Cont.)

324(T)
247(T)
melting range
246(T)
160(T)
77
Olsen cup depth
108(T)
242(F)
28
160(T)
140(T)
246(T)
stress relieving
137(T)
14(T)
18(T)
tensile elongation
12(T)
16(T)
76(F)
UNS number
247(T)
12(T)
16(T)
108(T)

remelting
45(T)

remelting
45(T)
12(T)
16(T)

sheet
76(F)
Inconel 690
annealing
137(T)
density
246(T)
247(T)
mean coefficent of thermal expansion
247(T)
melting range
246(T)
246(T)
stress relieving
137(T)
247(T)
Index Terms
Links
Inconel 700
drilling hole sizes
199(T)
198(T)
electron beam welding (not U-700)

face milling
forgeability rating
173
190(F)
93(T)
forging temperature93(T)
Inconel 702
composition
5(T)
weldability as function of aluminum and

titanium hardener content
155(F)

aging cycles
140(T)
composition
5(T)
120(T)
density
246(T)
development
343
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
eta phase disposed, fatigue life affected
253(F)
forged billets, elongation
284(T)
forged billets, reduction in area
284(T)
forged billets, tensile strength
284(T)
forged billets, yield strength
284(T)
forging, fracture toughness
285(T)
forging, roo m-temperature yield strength
285(T)
forging-weldment, fracture toughness
285(T)
forging-weldment, room-temperature yield

strength
285(T)
gamma double-prime phase effect on

strengthening
gamma double-prime precipitate
226
34
247(T)
melting range
246(T)
Index Terms
Links

niobium as gamma prime strengthener
154
no PWHT cracking
155
postweld heat treat cracking of welds
154
140(T)
246(T)
28
14(T)
tensile elongation
12(T)
tensile properties
12(T)
283
284(T)
247(T)
12(T)

remelting
45(T)

remelting and vacuum arc remelting
45(T)

remelting
45(T)
12(T)

aging cycles
141(T)
261
23
304(T)
240
development
339
friction welding
175
hot corrosion
304
341
305(F)
304(T)
hot corrosion resistance, aluminide-type coating

applied
investment casting, polycrystalline
311
89
nickel-aluminide-type coating effect on hot

corrosion resistance
304
141(T)
305(F)
28
285(T)
Index Terms
Links

340(F)
341(F)
IN-713C
composition
6(T)
density
262(T)
drilling hole sizes
199(T)
198(T)
261(T)
173
friction welding
175
325(T)
325(T)
262(T)
melting range
262(T)
oxidation
297
264(F)
specific heat
262(T)
259(F)
tcp phases formed
18(T)
19(F)
357

350(F)

year of availability, turbine blade
alloys
tensile elongation
343(F)
16(T)
262(T)
16(T)
16(T)
IN-713 Hf
18(T)
tensile elongation
17(T)
17(T)
17(T)
Index Terms
Links
Inconel 713LC (IN-713LC)

composition
261
6(T)
density
262(T)
261(T)
325(T)
325(T)
262(T)
melting range
262(T)
specific heat
262(T)
18(T)
tensile elongation
16(T)
262(T)
16(T)
16(T)

248
aging cycles
140(T)
aging rate
156(F)
annealing
availability
24
152
227
137(T)
24
bar, elongation
284(T)
bar, fracture toughness
285(T)
284(T)
bar, room-temperature yield strength
285(T)
284(T)
bar, yield strength
284(T)
brazing
141(T)
183
361(F)
240
cogging
composition
75
5(T)
6(T)

for arc welding
168(T)
120(T)
Index Terms
Links

cost
24
cost of materials for destructive test

methods
346
delta, gamma and gamma double-prime

phases
361(F)
delta phase role in preventing stress-rupture

embrittlement
delta phase role in strengthening
delta solvus
density
225 (F)
225 (F)
227(T)
75
246(T)
diffusion welding
discrete white spots
174
64
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
173
elongation
249(T)
explosive forming
112(F)
fatigue crack growth rate
65(F)
253 (F)
fatigue crack growth rate, environment

effects
255
167
fine grain forged
103
forgeability
forgeability rating
forging
257(F)
24
93(T)
102(T)
97
98(F)
99
102(F)
forging, bands caused by too high

temperature
95(T)
forging, elongation
284(T)
285(T)
forging, GTA weld in, elongation
284(T)
forging, GTA weld in, reduction in area
284(T)
forging, GTA weld in, tensile strength
284(T)
Index Terms
Links

forging, GTA weld in, yield strength
284(T)
forging prior to peeling the billet surface
64(F)
forging, room-temperature yield strength
285(T)
forgings, reduction in area
284(T)
forgings, tensile strength
284(T)
forging temperature
93(T)
99
101(F)
102(T)
248
251(F)
forging to three distinctly different

structures
103
285(T)

strength
forging, yield strength
285(T)
284(T)
freckle structure
41(F)
friction welding
175
gamma double-prime phase
27
gamma double-prime precipitate
34
26
grain size
249(T)
grain size prediction by mo deling
347
G-ratio
193
hardening retarded
heat treatment
218
155(F)
136
245
249
251(F)
high strength (HS), tensile and stress-rupture

properties
homogenization of cast product
ingot-metallurgy
investment casting
73(F)
348
80
for large structural castings
348
lead content effect on tensile properties
234
236(F)
liquation cracking
157
158(F)
251
192
237(T)
magnesium addition effect on stress-rupture

ductility
238
247(T)
Index Terms
Links

melting range
microstructure
mushy-zone thickness vs. ingot diameter
niobium as gamma prime strengthener
niobium content
246(T)
329
33(F)
77
43(F)
154
41(F)
no PWHT cracking
155
notch ductility lacked
218
notch sensitivity
226
overaged, crystal structure and
154
212
process modeling of remelt ingots
345
production size capability
343
reduction in area
41
sheet, elongation
284(T)
sheet, GTA weld in, elongation
284(T)
sheet, GTA weld in, reduction in area
284(T)
sheet, GTA weld in, tensile strength
284(T)
sheet, GTA weld in, yield strength
284(T)
sheet, reduction in area
284(T)
sheet, tensile strength
284(T)
sheet, yield strength
284(T)

43
102
242(F)
42(F)
249(T)
solidification white spots
227(T)
27(T)
postweld heat treat cracking of welds
pseudobinary phase diagram
43
65(F)
67(F)
140(T)
141(T)
147
246(T)
standard forged
103
standard heat treatment (STD)
248
standard heat treatment, tensile and stress-rupture

properties
249
251(F)
Index Terms
Links

strain-age (PWHT) cracking prevention
stress relieving
superplastic forming
tensile elongation
tensile properties
155
28
137(T)
14(T)
19(F)
113(F)
12(T)
16(T)
244
249(T)
283
284(T)
285(T)
247(T)
time -temperature-transformation diagram
105(F)
tramp element concentrations allowable

triple-melted ingot processing
235
237(T)
72
12(T)
vacuum arc remelting
63(F)
vacuum induction melting with electroslag remelting
45(T)
16(T)
249(T)
186(F)

remelting and vacuum arc remelting
45(T)

remelting
45(T)

155(F)
welding
149
151
welding, filler metal choices
167
169
wrought form

availability
343(F)
12(T)
Inconel 718 Direct Age

forged
103
forged structure
105
tensile and stress-rupture properties
14(T)
249
tensile elongation
12(T)
12(T)
12(T)
251(F)
187
Index Terms
Links
IN-718 SPF
grain growth vs. time
superplastic-formed product
113
114(F)
113(F)
Inconel 718 Super

14(T)
tensile elongation
12(T)
12(T)
12(T)
Inconel 721, composition
5(T)
5(T)
5(T)

aging cycles
composition
density
141(T)
261
6(T)
262(T)
directionally solidified
343
drilling hole sizes
199(T)
198(T)
261(T)
hot corrosion
302(F)
308
304
307

hot isostatic pressing, and stress-rupture
strength
265(F)
low-cycle fatigue behavior, atmosphere

effects
255
262(T)
melting range
262(T)
264(F)
141(T)
specific heat
262(T)
259(F)
19(F)
257(F)
20(F)

tensile elongation
350(F)
16(T)
Index Terms
Links

262(T)
16(T)
16(T)
IN-738C, stress-rupture strength
18(T)
IN-738LC
325(T)
hot isostatic pressing effect on creep

behavior
weld repair of
335(F)
325(T)
18(T)
336
Inconel X-750
aging cycles (AMS 5667)
140(T)
aging cycles (AMS 5668)
140(T)
annealing
137(T)
band sawing
191(T)
bar, elongation
284(T)
284(T)
284(T)
bar, yield strength
284(T)
107(F)
139(F)
composition
density
5(T)
246(T)
descaling
210
drilling
191(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
173
end milling
191(T)
face milling
191(T)
forgeability rating
forged billet, GTA weld in, elongation
93(T)
284(T)
Index Terms
Links
Inconel X-750 (Cont.)

forged billet, GTA weld in, reduction in
area
284(T)
forged billet, GTA weld in, tensile

strength
284(T)
forged billet, GTA weld in, yield

strength
284(T)
285(T)
forging, room-temperature yield strength
285(T)
forging temperature
93(T)
285(T)

strength
285(T)
324(T)
324(T)
247(T)
melting range
246(T)
metallic contaminants for

203
77
reaming
191(T)
242(F)
sheet, elongation
284(T)
sheet, GTA weld in, elongation
284(T)
sheet, GTA weld in, reduction in area
284(T)
sheet, GTA weld in, tensile strength
284(T)
sheet, GTA weld in, yield strength
284(T)
sheet products
91
sheet, reduction in area
284(T)
sheet, tensile strength
284(T)
sheet, yield strength
284(T)
solution treating cycles (AMS 5667)
140(T)
solution treating cycles (AMS 5668)
140(T)
246(T)
straddle milling
191(T)
stress relieving
137(T)
14(T)
19(F)
Index Terms
Links
Inconel X-750 (Cont.)

tapping
191(T)
tensile elongation
tensile properties
12(T)
283
284(T)
285(T)
247(T)
thermal treatments for precipitation hardening of

various forms
228
threading
191(T)
turning
191(T)
12(T)
12(T)
229(T)
Inconel 751
composition
5(T)
drilling hole sizes
199(T)
198(T)
forgeability rating
93(T)
forging temperature
93(T)

aging cycles
141(T)
261
23

alloy
267

development
composition
343
6(T)
density
262(T)
drilling hole sizes
199(T)
198(T)
325(T)
hot corrosion
308
309

elements
304
325(T)
262(T)
melting range
262(T)
Index Terms
Links

SCDS, creep-rupture life, orientation effect
274
SCDS, development
343
276(F)
SCDS, high-angle boundaries effect on rupture

life
271(F)
141(T)
specific heat
262(T)
259(F)
18(T)

tensile elongation
turbine engine applications
yield strength
350(F)
16(T)
262(T)
267
16(T)
239
16(T)

aging cycles
140(T)
91
density
246(T)
245(T)
247(T)
elongation
233(T)
eta phase formation
363(F)
forgeability rating
102(T)
95(T)
forgings, tensile properties of two test

coupons
232
forging temperature
102(T)
324(T)
324(T)
Laves phase formation
363(F)
247(T)
melting range
246(T)
nickel-base, eta phase role in strengthening
233(T)
225
Index Terms
Links

reduction in area
233(T)
243(F)
140(T)
246(T)
14(T)
tensile elongation
13(T)
yield strength
247(T)
13(T)
233(T)
233(T)
13(T)
Inconel MA-754
120(T)
131
brazing
183
as common ODS alloy
129
composition
129(T)
133
132
23
drilling hole sizes
199(T)
198(T)
250(T)
elongation
250(T)
325(T)
325(T)
mean coefficient of thermal expansion at

538 C
250(T)
melting range
250(T)
nonradioactive dispersoid
1000h rupture strength MPa(ksi)
as oxide-dispersion-strengthened alloy
plate production
production on a large scale
132
250(T)
28
131
132(T)
132
reduction in area at 1095 C
250(T)
242(F)
specific heat capacity at 21 C
250(T)
Index Terms
Links
Inconel MA-754 (Cont.)

thermal conductivity at 21 C
250(T)
250(T)
yield strength
250(T)
Inconel MA-758
chromium content
132
as common ODS alloy
129
composition
129(T)
industrial applications
133
132
132(T)
Inconel MA-6000
23
drilling hole sizes
199(T)
198(T)
milling
201

350(F)
Inconel MA-6000E
120(T)
as common ODS alloy
129
composition and matrix used
129
as oxide-dispersion-strengthened alloy
28
Inconel W, useable temperature versus Al/Ti ratio

in PC castings
216(T)
Inconel X
development
sheet products
strength developments
339
295(F)
91
341

155(F)
Index Terms
Links
J
J-1570
drilling hole sizes
199(T)
198(T)
forgeability rating
93(T)
forging temperature
93(T)
202(T)
J-1650
composition
7(T)
forgeability rating
93(T)
forging temperature
93(T)
19(F)
K
KM4, composition of P/M superalloys
120(T)
L
L-605. See Haynes
Lapelloy, stress-rupture strength
25
19(F)
LC Astroloy. See entry after Astroloy.
M
M005. See Ren 125 HF
M 21, temperature-strength capability as function
350(F)
M-22
density
262(T)
262(T)
melting range
262(T)
specific heat
262(T)
18(T)
tensile elongation
16(T)
262(T)
16(T)
16(T)
Index Terms
Links
M 246, temperature-strength capability as function

350(F)
M-252
aging rate
carbide film effect on impact resistance
carbide formation
carbide reactions
composition
density
156(F)
221
37
359(T)
5(T)
6(T)
246(T)
descaling
207
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
forgeability rating
93(T)
forging temperature
93(T)
324(T)
324(T)
247(T)
melting range
246(T)
242(F)
246(T)
14(T)
tensile elongation
12(T)
19(F)
247(T)
12(T)
12(T)
MAR-M-22+Ta, temperature-strength capability as

350(F)
MAR-M-002
alloy
267
directionally solidified, temperature-strength

capability as function of year of
availability
350(F)
Index Terms
Links
MAR-M-002 (Cont.)
magnesium content effect on stress-rupture
properties
239(F)
polycrystalline, temperature-strength capability as

alloys
343(F)
stress-rupture properties, nitrogen or silicondoped cast alloy

234
236(T)
239(F)
tramp elements effect on stress-rupture

properties
234
235(F)
236(F)
MAR-M-200
aluminum-silicon coated, creep rupture
behavior
264(F)
approximate PC cast counterpart of PWA 125 Hf.

1422
270
availability
342
304(T)
columnar grain directional solidification

(CGDS)
CGDS, creep behavior
90
270(F)
271(F)
CGDS, creep behavior, PC cast with longitudinal

SCDS
271(F)
CGDS, as creep-resistant turbine blade

material
CGDS, creep strains
333
269
CGDS, elongation
267(T)
CGDS, elongation vs. temperature
278(F)
CGDS, hafnium addition effect

CGDS, minimum creep rate
CGDS processed
279(F)
237
267(T)
347
CGDS, rupture life
267(T)
CGDS, rupture strength vs. temperature
268(F)
CGDS, temperature-strength capability as

CGDS, ultimate tensile strength
340(F)
341(F)
268(F)
Index Terms
Links
MAR-M-200 (Cont.)
CGDS, yield strength
composition
creep behavior
creep causing blade root failure
creep curves for different cast conditions
268(F)
6(T)
269
270(F)
332(F)
266
267(F)
266
267(T)
261
264(F)
creep-rupture properties of PC, CGDS, and

SCDS alloys
density
268(F)
262(T)
directional solidification (DS) processing
265
drilling hole sizes
199(T)
198(T)
ductility
263
ductility of cast version
263
261(T)
325(T)
grain -boundary cracking
267
hafnium as modifier
342
hot corrosion
302(F)
304(T)
325(T)
262(T)
melting range
262(T)
308
modulus of elasticity (Youngs modulus), PC,

CGDS versions
269
270(F)
nonuniform oxidation
295
296(F)
270(F)
271(F)
polycrystalline, elongation
267(T)
278(F)
polycrystalline, minimum creep rate.
267(T)
polycrystalline, rupture life
267(T)
279(F)
polycrystalline, rupture strength vs.

temperature
268(F)
264(F)
Index Terms
Links
MAR-M-200 (Cont.)
single-crystal directionally solidified (SCDS),
compared to CGDS version
SCDS, creep behavior
267
270(F)
271(F)
274
275(F)
SCDS, creep behavior, orientation

dependence
SCDS, elongation
267(T)
SCDS, elongation vs. temperature
278(F)
SCDS, fatigue properties related to carbide

size
282(F)
SCDS, minimum creep rate
267(T)
SCDS, rupture life
267(T)
specific heat
262(T)
stress-rupture life, crystallographic orientation

effect
274
276(F)
18(T)
19(F)
340(F)
350(F)
20(F)

tensile elongation
16(T)
tensile elongation vs. temperature
278(F)
262(T)
transient liquid phase bonding
186
tungsten effect in hot corrosion
303
16(T)
268(F)
useable temperature versus Al/Ti ratio in PC

castings
216(T)

yield strength
155(F)
239
268(F)
16(T)
MAR-M-200+Hf. See also PWA 1422.

columnar grain directionally solidified (CGDS),
creep behavior
CGDS, precipitation hardening
271(F)
216(F)
CGDS, stress-rupture strength and 1%

creep
267
268(F)
Index Terms
Links
CGDS, temperature-strength capability as

341(F)
columnar grain (CG), gamma prime solvus

temperature
CG, incipient melting temperature
325(T)
325(T)
directionally solidified (DS), solution treating

cycles
DS, aging cycles
141(T)
141(T)
18(T)
tensile elongation
17(T)
17(T)
17(T)
MAR-M-200+HIDS, temperature-strength
availability
350(F)
MAR-M-246
composition
6(T)
density
262(T)
drilling hole sizes
199(T)
198(T)
261(T)
292(F)

change
292(F)
262(T)
melting range
262(T)
polycrystalline cast, elongation vs.

temperature
278(F)
specific heat
262(T)
259(F)
18(T)
tensile elongation
16(T)
tensile elongation vs. temperature
278(F)
262(T)
16(T)
16(T)
Index Terms
Links
MAR-M-246+Hf
aging cycles
141(T)
325(T)
325(T)
141(T)
18(T)
tensile elongation
17(T)
17(T)
17(T)
MAR-M-247
aging cycles
141(T)
119
261
blade material for dual-alloy turbine wheel

concept
119
castability
267

(CGDS) alloy
267
CGDS, approximate cast counterpart being PC

cast MAR-M -247
CGDS, stress-rupture strength
composition
data compilation
density
270
260(F)
6(T)
261
263
262(T)
development of
342
directional recrystallization or directional

solidification
directional solidification, aging cycles
28
141(T)
directional solidification, solution treating

cycles
drilling
141(T)
200
261(T)
hot corrosion
308
hot isostatic pressing
265
262(T)
melting range
262(T)
polycrystalline, stress-rupture strength
260(F)
266(T)
Index Terms
Links
MAR-M-247 (Cont.)
214
141(T)
specific heat
262(T)
28
stress-rupture life, crystallographic orientation

effect
274
276(F)
18(T)

tensile elongation
tramp element concentrations allowable
341(F)
16(T)
262(T)
235,
237(T)
16(T)
16(T)
MAR-M-247+Hf
CGDS, gamma prime solvus temperature
325(T)
CGDS, incipient melting temperature
325(T)
MAR-M-302
as cast, creep rupture behavior
264(F)
304(T)
composition
7(T)
261
density
262(T)
drilling
200
drilling hole sizes
199(T)
198(T)
304(T)
192
262(T)
melting range
262(T)
specific heat
262(T)
259(F)
264(F)
19(F)
21(F)
Index Terms
Links
MAR-M-302 (Cont.)
tensile elongation
340(F)
17(T)
262(T)
17(T)
17(T)
zirconium content effect
235
MAR-M-322
composition
7(T)
density
262(T)
drilling hole sizes
199(T)
198(T)
262(T)
melting range
262(T)
specific heat
262(T)
19(F)
tensile elongation
17(T)
262(T)
17(T)
17(T)
21(F)
235
MAR-M-421
density
262(T)
261(T)
262(T)
melting range
262(T)
specific heat
262(T)
18(T)
tensile elongation
16(T)
262(T)
16(T)
16(T)
MAR-M-432
density
262(T)
262(T)
Index Terms
Links
MAR-M-432 (Cont.)
melting range
262(T)
specific heat
262(T)
259(F)
18(T)
tensile elongation
16(T)
262(T)
16(T)
16(T)
MAR-M-509
composition
304(T)
7(T)
density
262(T)
drilling
200
drilling hole sizes
199(T)
198(T)
261(T)
325(T)
304(T)
325(T)
investment casting
89
262(T)
melting range
262(T)
specific heat
262(T)
259(F)
18(T)
19(F)
340(F)
350(F)
21(F)

tensile elongation
17(T)
262(T)
17(T)
17(T)
235
MAR-M 918
composition
7(T)
245(T)
Index Terms
Links
MAR-M 918 (Cont.)

14(T)
tensile elongation
13(T)
13(T)
13(T)
19(F)
MC 2
composition
273(T)
density
273(T)
MC-102
density
262(T)
292(F)

change
292(F)
262(T)
melting range
262(T)
specific heat
262(T)
18(T)
tensile elongation
16(T)
262(T)
16(T)
16(T)
MERL 76
composition
development
120(T)
240
5(T)
120(T)
342
elongation
249(T)
grain size
249(T)
high-cycle fatigue
252
329
127
reduction in area
249(T)

properties
253(F)
Index Terms
Links
MERL 76 (Cont.)
341(F)
249(T)
vacuum (soluble gas) atomization process

122
123(F)
249(T)
MM 002
CGDS, tensile yield strength
278(F)
directionally solidified, stress-rupture

strength
impact energy vs. temperature
272(F)
279(F)
18(T)
tensile elongation
17(T)
17(T)
17(T)
MM 004. See IN-713 Hf.

MM 005. See Ren 125 Hf.
MM 006. See MAR-M 246 Hf.
MM 009. See MAR-M 200 Hf.
MM 0011. See MAR-M 247.
MP35N
composition
4(T)
density
246(T)
245(T)
247(T)
247(T)
melting range
246(T)
246(T)
tensile elongation
13(T)
247(T)
13(T)
13(T)
MP159
composition
4(T)
tensile elongation
13(T)
13(T)
Index Terms
Links
MP159 (Cont.)
13(T)
Multimet (N-155)(AMS 5794)

aging cycles
140(T)
composition
4(T)

for arc welding
168(T)
density
246(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
173
high-cycle fatigue
256(F)
247(T)
melting range
246(T)
243(F)
140(T)
246(T)
14(T)
tensile elongation
13(T)
19(F)
247(T)
tube spinning and explosive forming, exit

nozzle
111(F)
13(T)
13(T)
N
N-155. See Multimet (N-155).
NASA 11B-7, strain-controlled low-cycle fatigue
properties
NASA Co-W, Cr, Re, stress-rupture strength
253(F)
19(F)
NASA Co-W-Re
composition
7(T)
drilling hole sizes
199(T)
198(T)
Index Terms
Links
NASA Co-W-Re (Cont.)

21(F)
Nimocast 75
density
262(T)
262(T)
melting range
262(T)
specific heat
262(T)
tensile elongation
16(T)
262(T)
16(T)
16(T)
125 Hf.
Nimocast 80
density
262(T)
262(T)
melting range
262(T)
specific heat
262(T)
tensile elongation
16(T)
262(T)
16(T)
16(T)
Nimocast 90
density
262(T)
262(T)
melting range
262(T)
specific heat
262(T)
18(T)
tensile elongation
16(T)
262(T)
16(T)
16(T)
Nimocast 242
density
262(T)
262(T)
melting range
262(T)
specific heat
262(T)
18(T)
Index Terms
Links
Nimocast 242 (Cont.)

tensile elongation
16(T)
262(T)
16(T)
16(T)
Nimocast 263
anisotropy
108(T)
density
262(T)
Ericksen cup depth
108(T)
108(T)
262(T)
melting range
262(T)
Olsen cup depth
108(T)
specific heat
262(T)
tensile elongation
UNS number
16(T)
262(T)
16(T)
108(T)
16(T)
Nimonic alloys
development
91
1
339
294(F)
295
20
Nimonic 18 (N 18), composition of P/M

superalloys
120(T)
Nimonic 75
composition
4(T)
density
246(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
247(T)
melting range
246(T)
294(F)
Index Terms
Links
Nimonic 75 (Cont.)
sheet products
91
246(T)
14(T)

tensile elongation
340(F)
12(T)
247(T)
12(T)
12(T)
Nimonic 80
heat treatment
34
35(F)
microstructure
34
35(F)

alloys
343(F)
Nimonic 80+Ti, temperature-strength capability as

350(F)
Nimonic 80A
aging cycles
140(T)
106
anisotropy
108(T)
annealing
137(T)
carbide formation
composition
conversion to Nimonic 90
crystal structure
38
5(T)
239
27(T)
density
246(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
Ericksen cup depth
108(T)
108(T)
gamma-prime phase
27(T)
324(T)
Index Terms
Links
Nimonic 80A (Cont.)

grain -boundary hardening
218
324(T)
247(T)
melting range
246(T)
Olsen cup depth
108(T)
294(F)
rupture life vs. grain size
227(F)
242(F)
140(T)
246(T)
stress relieving
219(F)
341
137(T)
14(T)

tensile elongation
UNS number
350(F)
12(T)
247(T)
12(T)
108(T)

zirconium addition effect
155(F)
12(T)
236
Nimonic 81
density
246(T)
247(T)
247(T)
melting range
246(T)
246(T)

Nimonic 86, composition
350(F)
247(T)
4(T)
Index Terms
Links
Nimonic 90
aging cycles
140(T)
annealing
137(T)
composition
converted from Nimonic 80A
5(T)
239
density
246(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
324(T)
324(T)
247(T)
melting range
246(T)
294(F)
140(T)
246(T)
stress relieving
137(T)
14(T)
tensile elongation
12(T)
247(T)
12(T)
12(T)
Nimonic 90+Co, temperature-strength

availability
350(F)
Nimonic 91 (N 91), temperature -strength

availability
350(F)
Nimonic 95
composition
5(T)
drilling hole sizes
199(T)
198(T)
294(F)
Index Terms
Links
Nimonic 100 (N 100)

aluminum content
composition
295
5(T)
hot corrosion
300(F)
294(F)

350(F)
Nimonic 101 (N 101), temperature-strength

availability
350(F)
Nimonic 105
aluminum content
composition
295
5(T)
creep behavior, and reheat treatment
334(F)
density
246(T)
245(T)
247(T)
324(T)
324(T)
lead as tramp element, effect on creep behavior

and cavitation
234
247(T)
melting range
246(T)
294(F)
246(T)
14(T)
235(F)

350(F)
temperature-strength capability as function of year

of availability, turbine blade alloys
tensile elongation
343(F)
12(T)
247(T)
tramp elements effect on stress-rupture

properties
223(F)
12(T)
12(T)
Index Terms
Links
Nimonic 115
composition
creep behavior
5(T)
334
density
246(T)
245(T)
247(T)
324(T)
impact energy vs. temperature
279(F)
324(T)
247(T)
melting range
246(T)
246(T)
14(T)

tensile elongation
wrought, impact energy vs. temp erature
350(F)
12(T)
247(T)
12(T)
279(F)
wrought, temperature-strength capability as

alloys
343(F)
12(T)
Nimonic 263
density
246(T)
245(T)
247(T)
324(T)
324(T)
247(T)
melting range
246(T)
246(T)
tensile elongation
12(T)
247(T)
12(T)
12(T)
Index Terms
Links
Nimonic 942
density
246(T)
245(T)
247(T)
247(T)
melting range
246(T)
246(T)
14(T)
tensile elongation
12(T)
247(T)
12(T)
12(T)
Nimonic PE.11
density
246(T)
245(T)
247(T)
247(T)
melting range
246(T)
246(T)
14(T)
tensile elongation
12(T)
thermal conductivity. effect on stress-rupture
247(T)
12(T)
12(T)
Nimonic PE.16
density
246(T)
245(T)
247(T)
247(T)
melting range
246(T)
246(T)
14(T)
tensile elongation
12(T)
247(T)
12(T)
12(T)
Index Terms
Links
Nimonic PK.33
density
246(T)
245(T)
247(T)
247(T)
melting range
246(T)
246(T)
14(T)
tensile elongation
12(T)
247(T)
12(T)
12(T)
NX-188
hot corrosion
302(F)

elements
304
P
Alloy P16
anisotropy
108(T)
Ericksen cup depth
108(T)
108(T)
Olsen cup depth
108(T)
UNS number
108(T)
PA 101, composition of P/M superalloys
120(T)
PWA alloys, columnar grain directional

solidification
90
PWA 1422
approximate PC cast counterpart being MAR-M-200
270

alloy
creep behavior
development of
directional investment casting
267
271(F)
237
90
improvement by full solutioning
268
SCDS, corrosion resistance improved
268
Index Terms
Links
PWA 1422 (Cont.)

SCDS processing improved ductility and
transverse strength
stress-rupture strength and 1% creep
267
267
268(F)
PWA 1426, as columnar grain directionally

solidified alloy
267
PWA 1480
aging cycles
141(T)
271
challenged by PWA 1484
342
240
composition
density
6(T)
273(T)
273(T)
directional investment casting
90
ductility
278
full solutioning for SCDS casting
268
325(T)
325(T)
as single-crystal directionally solidified (SCDS)

alloy
267
347
SCDS, chromium content effect on hot corrosion

resistance
303
SCDS, compliance constants
273(F)
SCDS, creep behavior.
271(F)
SCDS, deformation and orientation
274
SCDS, elastic modulus as function of orientation

at room temperature
273
274(F)
SCDS, fracture toughness for aerospace

applications
286
SCDS, temperature-strength capability as

341(F)
SCDS, yield strength vs. orientation
276(F)
SCDS, yield strength vs. temperature, orientation

effects
274
276(F)
SCDS, yield strength vs. temperature, various

gamma prime sizes
277(F)
Index Terms
Links
PWA 1480 (Cont.)

141(T)
tensile elongation
17(T)
17(T)
17(T)
PWA 1483
composition
273(T)
density
273(T)
SCDS, creep-rupture life, orientation

effect
274
276(F)
6(T)
273(T)
PWA 1484
composition
density
273(T)
development
342
directional investment casting.90

alloy
267

341(F)
349
PWA 1487, oxidation resistance improved by

aluminide coating
Pyromet 31, composition
314
5(T)
Pyromet 860
composition
5(T)
density
246(T)
245(T)
247(T)
247(T)
melting range
246(T)
246(T)
14(T)
tensile elongation
12(T)
19(F)
247(T)
12(T)
12(T)
Index Terms
Pyromet CTX-1, composition
Links
4(T)
R
R' 162. See Ren N6
Alloy R-235
forgeability rating
93(T)
forging temperature
93(T)
RA 333
composition
4(T)
160(T)
160(T)
Refractaloy 26
composition
5(T)
drilling hole sizes
199(T)
198(T)
Ren alloys, forgeability vs. hardener

content
103(T)
Ren 41 (AMS 5800)

aging cycles
140(T)
106
annealing
137(T)
broaching
196(F)
carbide formation
37
carbide reactions
359(T)
304(T)
composition
composition effect on cracking tendency
141(T)
5(T)
6(T)
156(F)

for arc welding
density
168(T)
246(T)
descaling
207
drawing
109
drilling hole sizes
199(T)
198(T)
247(T)
173
Index Terms
Links
Ren 41 (AMS 5800) (Cont.)

face milling
103
190(F)
167
forgeability rating
93(T)
95(T)
forging temperature
93(T)

G-ratio
169
324(T)
193
heating rate effect on cracking tendency
156(F)
304(T)
101
324(T)
295(F)
intergranular oxidation
142(F)
machinability
192
194(T)
194(T)
247(T)
melting range
246(T)
milling
193
201

solution annealing
77
102
242(F)
112
140(T)
147
246(T)
stress relieving
137(T)
14(T)
tcp phases formed
357
tensile elongation
12(T)
141(T)
19(F)
247(T)
12(T)

castings
216(T)
Index Terms
Links
Ren 41 (AMS 5800) (Cont.)

welding
Ren 42, aging rate
155(F)
165
12(T)
156(F)
Ren 63
drilling hole sizes
199(T)
198(T)
Ren 77. See also Udimet 700 (U-700).

aging cycles
carbide formation
composition
141(T)
37
6(T)
density
262(T)
drilling
198
drilling hole sizes
199(T)
198(T)
325(T)
325(T)
262(T)
melting range
262(T)
141(T)
specific heat
262(T)
200
18(T)

tensile elongation
350(F)
16(T)
262(T)
16(T)
16(T)
Ren 80
aging cycles
141(T)
261
23
carbide formation
37
composition
6(T)
Index Terms
Links
Ren 80 (Cont.)
density
262(T)
drilling
200
drilling hole sizes
199(T)
198(T)
261(T)
325(T)
hot corrosion
308
hot isostatic pressing effect and porosity
265
hot isostatic pressing effect on high-cycle fatigue

resistance
265
266(F)
87
89(F)
hot isostatic pressing effect on high-cycle fatigue

strength
325(T)
262(T)

airfoils
melting range
230
262(T)
polycrystalline cast, approximate cast counterpart

of
270
141(T)
specific heat
262(T)
28
259(F)
18(T)

tensile elongation
350(F)
16(T)
262(T)
16(T)
16(T)
Ren 80 H (Ren 80 +Hf)

(CGDS) alloy
267
CGDS, approximate cast counterpart being PC

cast Ren 80
270
Index Terms
Links
Ren 80 H (Ren 80 +Hf) (Cont.)

composition
6(T)
directionally solidified (DS), aging

cycles
141(T)
directionally solidified, solution treating

cycles
141(T)
Ren 80+ Hf. See Ren 80H.

Ren 85
85

264(F)
19(F)
Ren 88
composition
240
5(T)
Ren 88DT
120(T)
defect-tolerant P/M composition
120
241
127
Ren 95
aircraft applications, turbine disks
120(T)
125
127(F)
centrifugal atomization for P/M

processing
composition
122
240
5(T)
120(T)
density
246(T)
drilling
200
drilling hole sizes
199(T)
198(T)
245(T)
247(T)
elongation
249(T)
104
324(T)
grain size
249(T)
Index Terms
Links
Ren 95 (Cont.)
high-cycle fatigue
252
hot isostatic pressed and forged, strain-controlled

low-cycle fatigue properties
253(F)
324(T)
low-cycle fatigue
252(F)
low-cycle fatigue, hold period effects
255
192
247(T)
melting range
246(T)
329
241

257(F)
28
117
119
powder metallurgy processing, aircraft

applications
133
powder metallurgy processing and forging
102
as powder metallurgy turbine disk alloys
127
powder processing with superplastic

forming
production methods
115
244
reduction in area
249(T)
246(T)
14(T)
tensile elongation
12(T)
tensile properties, showing processing heat

treatment conditions
tensile strength
244
249(T)
243
247(T)
12(T)
227
249(T)

availability
343(F)
12(T)
249(T)
Ren 100. See also IN-100.

23
Index Terms
Links
Ren 100 (Cont.)

composition
drilling
5(T)
6(T)
200
Ren 108. See CM-247

Ren 120
aluminide coated vs. uncoated, stress-rupture
testing
283(F)
325(T)
325(T)
stress-rupture testing, aluminide coated vs

uncoated
95
283(F)
Ren 125, as columnar grain directionally

solidified alloy
267
Ren 125 HF
18(T)
tensile elongation
17(T)
17(T)
17(T)
Ren 220, gamma prime and gamma double-prime

phases
362(F)
Ren N4
aging cycles
composition
density
141(F)
240
7(T)
273(T)
273(T)

alloy
267
SCDS, fracture toughness for aerospace

applications
286
141(T)
Ren N5
349
240
composition
density
7(T)
273(T)
273(T)
Index Terms
Links
Ren N6
composition
density
7(T)
273(T)
273(T)

alloy
267
RR-2000
alloy
267
composition
7(T)
density
273(T)
273(T)

alloy
267
SCDS, impact energy vs. temperature
279(F)
SCDS, tensile yield strength
278(F)
272(F)
RR 2060
as single-crystal directionally solidified alloy,
tensile yield strength
278(F)
272(F)
RR-7080. See MM 002

RSR 185
elongation
249(T)
grain size
249(T)
reduction in area
249(T)
249(T)
yield strength (0.2%)
249(T)
S
S-590, stress-rupture strength
19(F)
S-816
aging cycles
140(T)
annealing
137(T)
139(F)
composition
4(T)
drilling hole sizes
199(T)
198(T)
7(T)
Index Terms
Links
S-816 (Cont.)
forgeability rating
forging
173
93(T)
104
forging temperature
93(T)
140(T)
stress relieving
137(T)
19(F)
21(F)
261
263(F)
stress-rupture strength, cast vs. wrought

versions
SB 16, temperature-strength capability as function
350(F)
SC 16
composition
273(T)
density
273(T)
SC 180
composition
273(T)
density
273(T)
SEL
304(T)
304(T)
tensile elongation
17(T)
17(T)
17(T)
SEL-15
304(T)
304(T)
18(T)
tensile elongation
17(T)
17(T)
17(T)
SR3, composition of P/M superalloys
120(T)
SRR 99
240
Index Terms
Links
SRR 99 (Cont.)
alloys
composition
density
343(F)
7(T)
273(T)
273(T)

alloy
SCDS, impact energy vs. temperature
267
279(F)

function of year of availability, turbine
blade alloys
343(F)
SCDS, tensile yield strength
278(F)
272(F)

350(F)
Stellite alloy 31. See also X-40.

P/M processed, aircraft applications
Stellite B, composition
120(T)
134
4(T)
Stellite 6B
247(T)
247(T)
tensile elongation
13(T)
247(T)
13(T)
13(T)
T
TAZ-BA, rupture strength vs. temperature
264(F)
TD Nichrome
129
TD nickel
129
development
118
drilling hole sizes
199(T)
198(T)
Index Terms
Links
TD nickel (Cont.)
95(T)
19(F)

340(F)
Tinidur A-286, temperature-strength capability as

TMP-3, composition of P/M superalloys
340(F)
120(T)
TRW 1900
creep behavior
270(F)

279(F)
264(F)
TRW NASA VI A, stress-rupture curve
19(F)
20(F)
259(F)
TRW VI A
drilling hole sizes
199(T)
198(T)

350(F)
TZM (Mo), face milling
190(F)
U
Udimet 41
110(T)
110(T)

parameter
248(F)
110(T)
Udimet 400
14(T)
tensile elongation
12(T)
12(T)
12(T)
Index Terms
Links
Udimet 500 (U-500)

aging cycles
140(T)
annealing
137(T)
141(T)
boron and zirconium addition effect on

creep
238(T)
boron and zirconium addition effect on grainboundary stability

carbide formation
composition
238(T)
37
304(T)
5(T)
creep
238(T)
density
246(T)
double-aging treatment
199(T)
198(T)
245(T)
247(T)
face milling
190(F)
93(T)
103(T)
forging temperature
93(T)
gamma prime phase
361(F)
324(T)
grain -boundary stability
238(T)
202(T)
304(T)

262(T)
142
drilling hole sizes
forgeability rating
7(T)
101
324(T)
192
mean coefficient of thermal expansion.
247(T)
262(T)
melting range
246(T)
262(T)

parameter
248(F)
242(F)
140(T)
141(T)
specific heat
246(T)
262(T)
Index Terms
Links
Udimet 500 (U-500) (Cont.)

strengthened by gamma prime
stress relieving
142
137(T)
14(T)
18(T)
340(F)
350(F)
13(T)
17(T)
247(T)
262(T)
13(T)
17(T)
19(F)

tensile elongation
castings
216(T)

155(F)
13(T)
17(T)
Udimet 520
composition
5(T)
density
246(T)
melting range
246(T)

parameter
248(F)
242(F)
246(T)
14(T)
tensile elongation
13(T)
13(T)
13(T)
Udimet 630
composition
5(T)
drilling hole sizes
199(T)
198(T)

95(T)
102
tensile elongation
13(T)
13(T)
13(T)
142
Index Terms
Links
Udimet 700 (U-700). See also Astroloy.

aging cycles
140(T)
141(T)
227
261
106
aluminide coating, incipient melting and

degradation
aluminide diffusion coatings for
annealing
325
313
137(T)
23
304(T)

composition
240
5(T)
7(T)
creep-rupture strength effect of sigma phase

formation
density
329(F)
246(T)
development
341
diffusion welding
174
drilling
198
drilling hole sizes
199(T)
198(T)
245(T)
247(T)

extrusion
173
76
forgeability rating
93(T)
forg ing temperature
93(T)
324(T)
304(T)

elements
304
292(F)

change
292(F)
hot cracking
152(F)
324(T)
247(T)
156(F)
158(F)
Index Terms
Links

airfoils
230
melting range
246(T)
328(F)
microstructure, incipient melting effect
326(F)
nonuniform oxidation
295
296(F)
overaging benefit for prevention of PWHT

cracking
155(F)
polycrystalline, rupture strength vs.

temperature
rolling
268(F)
76

parameter
248(F)
242(F)
sigma phase formation
358
359(F)
140(T)
141(T)

stress relieving
360(F)
147
246(T)
28
137(T)
14(T)
19(F)
340(F)
341(F)

tensile elongation
13(T)
247(T)
thermal-mechanical fatigue cracking
331(F)
transient liquid phase bonding

350(F)
186
13(T)
useable temperature vs. Al/Ti ratio in PC

castings
as variant of Astroloy
216(T)
239

wrought, hot corrosion testing
155(F)
292(F)
wrought, hot corrosion testing, specimen weight

Index Terms
Links
Udimet 700 (U-700). (Cont.)

change
292(F)
13(T)
Udimet 710
composition
5(T)
density
262(T)
drilling hole sizes
199(T)
198(T)
245(T)
262(T)
melting range
262(T)
242(F)
specific heat
262(T)
7(T)
14(T)
18(T)
tensile elongation
13(T)
17(T)
262(T)
13(T)
17(T)
13(T)
17(T)
Udimet 718
cast, density
262(T)
cast, mean coefficient of thermal

expansion
262(T)
cast, melting range
262(T)
cast, specific heat
262(T)
cast, thermal conductivity
262(T)

parameter
248(F)
Udimet 720 (U-720)

composition
240
5(T)
120(T)
defect-tolerant P/M composition
120
elongation
213
215(F)
73
hot isostatic pressing effect on formability
126
for industrial gas turbine disks
349
Index Terms
Links

ingot-metallurgy
348
77
241
precipitation hardening, tensile strength

curves
213
215(F)
242(F)
28
14(T)

tensile elongation
350(F)
13(T)
as turbine disk material
344
13(T)
213
213
215(F)
yield strength
215(F)
13(T)
Udimet 720 LI
composition
5(T)
for industrial gas turbine disks
349
turbine engine applications
344
Udimet 901, rupture strength vs. Larson-Miller

parameter
Udimet 7000, stress-rupture strength
248(F)
20(F)
Udimet D979, rupture strength vs. Larson-Miller

parameter
248(F)
UDM 56
18(T)
tensile elongation
17(T)
17(T)
17(T)
UMCo-50, composition
4(T)
Unitemp AF11DA
density
246(T)
247(T)
247(T)
246(T)
Index Terms
Links
Unitemp AF11DA (Cont.)

247(T)
Unitemp AF21DA
composition
5(T)
242(F)
264(F)
Unitemp AF21DA6
14(T)
tensile elongation
13(T)
13(T)
13(T)
Unitemp 212, stress-rupture strength
19(F)
V
V-36
composition
7(T)
19(F)
V-57
composition
5(T)
drilling hole sizes
199(T)
198(T)
245(T)
forgeability rating
93(T)
forging temperature
93(T)

26
329
243(F)
14(T)
tensile elongation
13(T)
13(T)
13(T)
Vitallium. See also Haynes Stellite
31
91
223(F)
dentistry applications
19(F)
339
91
Vitallium modified alloy (HA-21), carbide

precipitation
223(F)
224(F)
Index Terms
Links
W
W 152, temperature-strength capability as function
350(F)
W-545
composition
drilling hole sizes
5(T)
199T)
198(T)
Waspaloy (AMS 5828 C)

aging cycles
aging treatments
annealing
application of superalloy
140(T)
141(T)
141
91
227
228
106
137(T)
15
carbide film effect on forged rupture life and

ductility
221
222(F)
cast, temperature-strength capability as function

composition
340(F)
5(T)
7(T)
composition of filler metals and electrode welds

for arc welding
168(T)
density
246(T)
drilling hole sizes
199(T)
198(T)
245(T)
247(T)

electroslag remelting
fatigue crack growth rate, grain size effect
173
71
254
256(F)
fine grain, temperature-strength capability as

forgeability
forgeability rating
forging, closed-die
340(F)
22
93(T)
102(T)
103(T)
96
97(F)
95(T)
Index Terms
Links
Waspaloy (AMS 5828 C) (Cont.)

104
forging, open-die
96(F)
97(F)
forging temperature
93(T)
102(T)
freckled structure
44(F)
gamma prime and grain size effects on crack

growth rate
gamma-prime phase
254
27(T)
324(T)
grain -boundary hardening
218
G-ratio
193
heat treatment
heat treatments effect on tensile properties
256(F)
219
15
228
229(F)
73

elements
304
292(F)

change
292(F)
324(T)
inertia bonding
175
intermediate heat treatment
220
252
192
magnesium addition effect
238
247(T)
melting range
246(T)
microstructure, carbides present
postweld heat treat cracking
329
36(F)
77
153(F)
214

parameter
248(F)
242(F)
140(T)
141(T)
Index Terms
Links
Waspaloy (AMS 5828 C) (Cont.)

solution treating, temperature
147
246(T)

properties
stress relieving
253(F)
341
28
137(T)
14(T)
19(F)
Super version, temperature-strength capability as

340(F)

340(F)
341(F)

alloys
tensile elongation
343(F)
13(T)
247(T)
turbine blade, intergranular oxidation

attack
332(F)
13(T)

castings
vacuum melted for increased strength
216(T)
339

welding
155(F)
151
185(F)
186
13(T)
Waspaloy+Mo, temperature-strength capability as

WAX-20, composition
350(F)
7(T)
WI-52
aluminide coated, creep rupture behavior
aluminide coatings for oxidation resistance
chro mium content in alloy (%)
coatings to prevent oxidation attack
264(F)
311
304(T)
332
333(F)
Index Terms
Links
WI-52 (Cont.)
composition
7(T)
261
density
262(T)
drilling hole sizes
199(T)
198(T)
hot corrosion
302(F)
304(T)
264(F)

elements
304
262(T)
melting range
262(T)
specific heat
262(T)
18(T)
19(F)
21(F)

tensile elongation
welding
340(F)
17(T)
262(T)
17(T)
151
17(T)
X
X-40 (HA-31). See also Haynes Stellite
31.
broaching
197(T)
223(F)
304(T)
composition
7(T)
density
262(T)
hot corrosion
302(F)
304(T)
262(T)
melting range
262(T)
specific heat
262(T)
stress-rupture curves
224
29
259(F)
Index Terms
Links
X-40 (Cont.)
18(T)
19(F)
340(F)
350(F)
21(F)

tensile elongation
17(T)
262(T)
17(T)
17(T)
X-45, stress-rupture curve
259(F)
X-750
composition
postweld strain-age cracking of we ld
6(T)
154(F)

350(F)
X-1900, forging, design guides
95(T)
90Ta-10W, face milling
190(F)

Alloy Index

Uploaded by

Copyright:

Available Formats

Alloy Index

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Alloy Index

Uploaded by

Copyright:

Available Formats

ALLOY INDEX

drilling hole sizes

drilling speeds and feeds grouping

dynamic modulus of elasticity

electron beam welding

mean coefficient of thermal expansion

yield strength of disks as function of year of

Vac degassed, temperature-strength capability as

This page has been reformatted by Knovel to provide easier navigation.

drilling speeds and feeds grouping

dynamic modulus of elasticity

mean coefficient of thermal expansion

specific heat capacity

strengthening mechanisms (as modified stainless

ultimate tensile strength

welding and zinc removal

19-9W (AMS 5782), composition of filler metals

bulge forming, speed for

cold reduction effect on hardness

cold work effect on yield strength

composition of filler metals and electrode wires

draw forming, speed for

drilling hole sizes

drilling speeds and feeds grouping

This page has been reformatted by Knovel to provide easier navigation.

electric arc furnace/argon oxygen decarburization

forging, aircraft turbine shaft

forging, design guides

forging temperature range

forming, directionality in bulging

incipient melting temperature

liquating phase for liquation cracking

mean coefficient of thermal expansion

mill product availability

gamma prime solvus temperature

forming by spinning from a roll forging

gamma prime precipitation for strength

reduction rate during forging

restraint fixturing for heat treatment

rupture strength vs. Larson-Miller

rupture strength vs. temperature

solution treating cycles

This page has been reformatted by Knovel to provide easier navigation.

specific heat capacity

tensile forming, speed for

ultimate tensile strength

useable temperature, versus Al/Ti ratio in PC

vacuum induction melting with electroslag

vacuum induction melting with vacuum arc

yield strength of disks as function of year of

AF21DA-6, composition of P/M

This page has been reformatted by Knovel to provide easier navigation.

drilling hole sizes

drilling speeds and feeds grouping

ultimate tensile strength

yield strength (0.2% offset)

drilling hole sizes

drilling speeds and feeds grouping

ultimate tensile strength