The document summarizes a new belt called the Hamaheat belt that can withstand extremely high temperatures up to 750°F. It has superior abrasion resistance and heat tolerance compared to other belts, allowing it to run hotter loads for longer periods of time. This results in lower maintenance costs from reduced downtime, carry-back, and belt replacements. Test results show the Hamaheat belt maintains its strength and elasticity longer than competing belts in high heat conditions, providing the lowest cost-per-tonnage and best return on investment.
The document summarizes a new belt called the Hamaheat belt that can withstand extremely high temperatures up to 750°F. It has superior abrasion resistance and heat tolerance compared to other belts, allowing it to run hotter loads for longer periods of time. This results in lower maintenance costs from reduced downtime, carry-back, and belt replacements. Test results show the Hamaheat belt maintains its strength and elasticity longer than competing belts in high heat conditions, providing the lowest cost-per-tonnage and best return on investment.
The document summarizes a new belt called the Hamaheat belt that can withstand extremely high temperatures up to 750°F. It has superior abrasion resistance and heat tolerance compared to other belts, allowing it to run hotter loads for longer periods of time. This results in lower maintenance costs from reduced downtime, carry-back, and belt replacements. Test results show the Hamaheat belt maintains its strength and elasticity longer than competing belts in high heat conditions, providing the lowest cost-per-tonnage and best return on investment.
The document summarizes a new belt called the Hamaheat belt that can withstand extremely high temperatures up to 750°F. It has superior abrasion resistance and heat tolerance compared to other belts, allowing it to run hotter loads for longer periods of time. This results in lower maintenance costs from reduced downtime, carry-back, and belt replacements. Test results show the Hamaheat belt maintains its strength and elasticity longer than competing belts in high heat conditions, providing the lowest cost-per-tonnage and best return on investment.
Superior Abrasion Resistance Lower Cost-Per-Tonnage Reliable Vulcanized Splices Manufactured to Width
50 Years of research gets you 750oF
Hamaheat High Heat Belts For decades plants like yours have been forced to cope with conveyor belts that quickly crack and blister under high heat conditions. The resulting carry-back, clean-up and maintenance costs have been a constant problem. Finally, a new breed of belt is changing all that. Over half a century of research and development has produced a belt with advanced construction, providing durability under extreme material temperatures as high as 750oF (400oC). The Hamaheat Belt gives you superior abrasion resistance in severe conditions, the lowest cost-per-tonnage and the best ROI in the business.
Proprietary polymer and
adhesion technology allows you to run hotter loads for longer time periods.
F rom less downtime and
dramatically longer belt life to reliable splices and reduced maintenance hours spent, Hamaheat belts have allowed us to use our resources more efficiently for over five years now. To say that Hamaheat has made a big improvement to our operation would be an understatement. ~K en Upchurch, Maintenance Supervisor TXI Midlothian Cement
Breakthroughs in heat tolerance, abrasion resistance and splice adhesion
properties have been industry-proven throughout the world in cement plants, lime kilns, potash manufacturing, foundries, coke oven plants, iron ore pelletizing and other high heat applications. Shouldnt you be getting this kind of performance, durability and results from your belt?
Advanced construction withstands heat up to 750oF (400oC)
Hamaheat belts resist hardening and cracking while carrying fine or coarse loads up to 750oF (400oC)*. Laboratory tests show that in high-heat conditions Hamaheat belts maintain cover tensile strength almost five times greater than the two leading brands. Improved cover performance under extreme heat extends the life of your belt while minimizing material carry-back. Clean-up and maintenance costs associated with premature cracking & blistering are greatly diminished. Hamaheat belts resist the cupping and/or curling tendency of typical high-temp belts allowing for better belt tracking and reduced edge damage. All while enhancing the overall safety of your operation. *Maintaining a belt surface temperature under 400oF will maximize belt life.
of performance. Superior abrasion resistance under extreme conditions In comparison with conventional leading brand high-heat EPDM belts, Hamaheat belts show significantly less cover loss in abrasion tests (DIN 53516). (See top graph.)
Lowest cost-per-tonnage and best ROI
In side-by-side tests with conventional EPDM high-heat belts, Hamaheat belts lasted significantly longer carrying a wide variety of high-heat materials. The Hamaheat advantage gives you greater peace-of-mind and optimum ROI.
Vulcanized splices remain intact
for the life of your belt Hamaheat adhesion values actually increase with heat so you can count on splices to last the life of your belt when properly vulcanized. Hamaheat belts eliminate the need for mechanical splices, allowing you to take advantage of belt cleaners and further reduce the cost cycle associated with carry-back material and clean-up.
Side-by-side comparison LEADING BRAND A
LEADING BRAND B
HAMAHEAT S-100
LEADING 100 BRAND A
LEADING BRAND B
HAMAHEAT S-100
Index = 100
Index = 100
Top cover DIN abrasion test:
less is better
88 100 45
88
Measures volume loss of cover rubber.
25
50
75
100
125
= less abrasion resistance.
45
25
50
75
100
125
100 172 640
100
200
300
400
500
600
Contact us for a thorough consultation
to match the right belt for your operation.
Test methods: 365oF (180oC) after 168 hours operation.
Elongation/elasticity of cover rubber is
important to belt performance and service life. Competitors EPDM belts rapidly deteriorate under high temps. Hamaheats cover rubbers retain elasticity. Result: 700 maximum performance and service life. Test methods: 365oF (180oC) after 168 hours operation.
Top cover tensile strength:
100 92 420
100
200
300
400
Extreme-heat carcass design
Hamaheats extreme heat technology strength starts at the core. The carcass is made from a proprietary fabric and dipping process that resists delamination and flexural fatigue.
150
Top cover % elongation at break:
Run true with molded edges
manufactured to width Conventional high-heat belts are often slit from wider rolls. Thats why its not uncommon for belts to have some camber, requiring more time to train initially. In contrast, Hamaheat belts are manufactured to width with molded edges so you never get a hooked belt. Theyre good to go from the moment theyre installed. And they continue to perform like no other belt on the market.
150 Higher number (more volume loss)
Maintaining tensile strength of cover
rubber is important to a belts performance and service life. Competitors EPDM belts quickly weaken under high temps. Not Hamaheat cover rubbers.
500 Test methods: 365oF (180oC) after 168 hours operation.
Top cover to ply adhesion:
100 333 633
100
200
300
400
500
600
Adhesion from cover to ply and from ply
to ply is critical to extending belt life and performance. High adhesion ensures splice integrity and resistance to flexural fatigue. Hamaheat outperforms.
700 Test methods: 302oF (150oC) after 168 hours operation.
HAMAHEAT by Yokohama
From our customers
n our most extreme O high-heat clinker belts we simply havent had anything last as long and perform as good as Hamaheat belts. ~ Dennis Davis, Maintenance Planner, CEMEX
V ulcanized splices that last the
life of the belt, less wear and tear on the system from carry-back, increased belt life, and savings on maintenance man-hours are the main benefits we have realized using Hamaheat belts. ~ Tony Guettner, Maintenance Superintendent, Capitol Cement
Head Office 1638 Fosters Way, Delta, BC V3M 6S6 Tel: 604.540.1950 Email: info@belterra.ca Nanaimo
Edmonton
Regina
1945B Bollinger Road
Nanaimo, BC, V9S 5W9 Tel: 250.741.0094
9741 49th Street
Edmonton, AB, T6B 2L8 Tel: 780.462.3245
157 Leonard Street
North Regina, SK, S4N 5X5 Tel: 306.546.2400
Prince George
Calgary
Saskatoon
2247 South Quinn Street
Prince George, BC, V2N 2X4 Tel: 250.562.1245
#20, 700 58th Avenue S.E.
Calgary, AB, T2H 2E2 Tel: 403.253.9333
302-50th Street East
Saskatoon, SK, S7K 6X2 Tel: 306.244.2400
Kamloops
Grande Prairie
Winnipeg
1180 Ord Road
Kamloops, BC, V2B 7V4 Tel: 250.376.1125
9515 116th Street
Grande Prairie, AB, T8V 5W3 Tel: 780.539.0478
1525 Dublin Avenue
Winnipeg, MB, R3E 3N2 Tel: 204.694.3322
Kelowna
Leduc Project Division
Thunder Bay
155 Cambro Road
Kelowna, BC, V1X 7T2 Tel: 250.765.6300
#103 8009 39th Street
Leduc, AB, T9E 0B3 Tel: 780.980.2845
1040 Gorham Street
Thunder Bay, ON, P7B 5X5 Tel: 807.623.4990
NOTICE: Yokohama Rubber Company (YRC) supplies data, specifications and test results, both verbal and written, as a service to our customers. As operating conditions and conveyor designs vary from system to system, no representation or warranty is made by YRC that the representative data, specifications or test data provided herein are applicable to any specific or individual system. Hamaheat is a registered trademark of the Yokohama Rubber Co. Ltd.
