Mp8 Export 400 C

Features
High Torque MAXICRUISE Diesel Engine

Maximum Horsepower 400 BHP [298 kW]
Electronic Unit Fuel Injection with Rate Shaping
V-MAC IV Total Vehicle Electronics System
Wide Operating Range 1200-1950 RPM
Chassis Mounted Charge Air Cooled
Extended Service Intervals
MACK PowerLeash Engine Brake
Emissions: Euro-3 Compliant
V-MAC IV Functions
400C
4th Generation Vehicle Management And Control System
V-MAC IV PRODUCTIVITY FEATURES:

PTO (4) and Electronic Hand Throttle Control
Engine Smart Fan Control
Integrated Sleeper Low Voltage Disconnect
Smart Idle Speed Regulator
GuardDog Routine Maintenance Monitoring
V-MAC IV DRIVER CONVENIENCE FEATURES:

Full Featured Cruise Control
Cruise n Brake Engine Brake Control
Programmable Engine Governor Type
Idle Cooldown
Daytime Running Light (DRL) Override
V-MAC IV FUEL ECONOMY FEATURES:

Vehicle Speed Limiting
Engine Sweet Spot Indicator
Fuel Economy Incentive Program
Idle Shutdown
Integrated Temp-A-Start
V-MAC IV RELIABILITY FEATURES:

Engine Protection
Starter Protection
Differential Lock Auto Control
Specifications
Peak HP (kW) @ RPM . . . . . . . . . . 400 [298] @ 1500-1950
HP [kW] @ Governed RPM . . . . . . . . . . 358 [267] @ 1950
Max. Torque lb. ft. [Nm] @ RPM . . 1,460 [1 979] @ 1200
Type . . . . . . . . . . . . . . . . . . . . . . . Direct Injection Diesel
Number of Cylinders. . . . . . . . . . . . . . . . . . . . . . 6, In-Line
Bore & Stroke, in. [mm] . . . . . . . . . 5.16 x 6.22 [131 x 158]
Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 780 [13]
Compression Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . 18.1:1
Firing Order. . . . . . . . . . . . . . . . . . . . . . . 1-5-3-6-2-4
Torque Rise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51%
Clutch Engagement . . . . . 800 lb. ft. [1 085 Nm] @ 800 RPM
Idle Speeds:
Low. . . . . . . . . . . . . . . . . . . . . Adjustable; 650 RPM
High . . . . . . . . . . . . . . . . . . . Adjustable; 2100 RPM
Engine Brake Retarding Power . . . 435 HP [324 kW] @ 2100 RPM
(If Applicable)
Weight, Dry: (Approx.) . . . . . . . . . . . 2,460 lbs. [1 116 kg]

(With air compressor, but no oil, water, starter, fan, alternator, or clutch)
Dimensions
820.0 mm
1 577.5 mm
V-MAC IV FLEET MANAGEMENT FEATURES:

DataMax Comprehensive On-Board Data Logger
InfoMax PC Fleet Management Software
1 271.7 mm
V-MAC IV SAFETY AND SECURITY FEATURES:

Speed Sensor Tamper Resistance
Theft Deterrence
5th Wheel Slide Unlocked Vehicle Speed Limiting
Air Suspension Deflated Vehicle Speed Limiting
V-MAC IV SERVICEABILITY FEATURES:

SAE J1587 and J1939 Diagnostic Port
Electronic Fault Logging with Fault Reporter
VCADS PC Based Service Software
Denotes an available option.
Mack Trucks, Inc., Allentown, Pennsylvania
www.macktrucks.com
400C
Engine Performance
Engine Specifications
Flywheel Housing . . . . . . . . . . . . . . . . .Die cast Aluminum
Cylinder Block:
Material . . . . . . . . . . . . . . . . . Alloyed Grey Cast Iron
Ladder Frame Reinforcement
Cylinder Liners:
Type . . . . . . . . . . . . . . . . . . . . . . . . . .Full Wet Design
Surface Finish . . . . . . . . . . . . . . . . . . Plateau Honed
Cylinder Head Assembly:
Type . . . . . . . . . . . . . Grey Cast Iron Slab Head With
Intermediate Deck
Single Overhead Cam
Configuration . . . . . . . . . . . . . . . 4 Valves/Cyl., OHV
Valve Type . . . . . . . . . . . . . . . . . . . . . . . . . . . Poppet
Valve/Insert Material . . . . . Super Alloy (Serviceable)
Pistons & Rings:
Piston Type . . . . . . . Monotherm Single Piece Steel
w/Closed Cooling Gallery
Pin Diameter . . . . . . . . . . . . . . . . . . . 2.125" [54 mm]
Rings . . . . . . . . . . . . . . 2 Compression, 1 Oil Control
Crankshaft:
Material . . . . . . . . . . . . . . . . . . Forged, Carbon Steel
Heat Treatment . . Induction-Hardened Journals/Fillet
Main Bearing Diameter . . . . . . . . . . . . 4.5" [114 mm]
Charge Air Cooling . . . . . . . . Chassis Mounted, Air-To-Air
Fuel System . . . . . . . . . Delphi E3 Electronic Unit Injectors
w/2 Solenoid Valve Technology and Rate
Shaping
Fuel Supply Pump . . . . . . . . . . . . . . . . . . . ZF Meritor
Filter . . . . . . . . . . . . . . . . . . . . . . Spin On, Disposable
Lubrication System:
Type . . . . . . . . . . . . . . . . . . . .Full Pressure, Wet Sump
Oil Filters . . . . . . . . . . 2 Spin-On Full Flow Disposable,
1 By-pass
Oil Cooler . . . . . . . . . . . . . . . . . . Stainless Steel Plate
Total Oil Capacity . . . . . . . . . . . 36 qts. (Incls. Filters)
Drain Plug . . . . . . . . . . . . . . . . . . . . . . . . . . Magnetic
Cooling System:
Capacity . . . . . . . . . . . . . . . . . . . . . . . . 17 qts. [16 L]
Thermostats . . . . . . . . . . . . . . . . . . . . . . 180 F [82 C]
Hose Material . . . . . . . . . . . . . . . . . . . . . . . . Silicone
Air Compressor:
Type . . . . . . . . . . . . . . . . . . . . . . . . Meritor/WABCO
Standard Capacity:
Conventional Chassis . . . . . . . . 18.7 cfm [8.9L/s]
LCF Chassis . . . . . . . . . . . . . . . 37.4 cfm [17.8L/s]
Turbocharger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Holset
Accessory Belt . . . . . . . . . Poly-V w/Automatic Tensioners
Gear Recommendations
Proper gearing is necessary to achieve optimum
vehicle performance and fuel economy. Vehicle
specifications, including engine, transmission, axle
ratio, and tire selection, should generally be selected to meet the following criteria:
Startability
Highway Applications . . . . . . . . . > 10%

On-Off Highway Applications . . . > 16%
Gradeability
@ Cruise Max. MPH . . . . . . . . . . > 0.5%

@ Peak Torque, Top Gear . . . . . > 1.5%
Cruise RPM
1500 50 RPM*
*Cruise RPM = Engine speed in top gear @ Cruise Max. MPH setting.
Limited to 65 MPH. At higher speeds gear truck to obtain above RPM @
65 MPH.
Oil/Filter Service Intervals

Refer to the latest version of Mack Maintenance &
Lubrication Manual TS494.
Optional Equipment*
High Capacity Air Compressor
High Capacity Alternator
Refer to the MACKTRAQ electronic sales tool to

obtain startability, gradeability and cruise RPM
results for specific vehicle specifications. Special
service applications, road surfaces, high GCWs or
other factors may require different gearing considerations.
** Availability may be chassis model dependent.
A SALES ENGINEERING PUBLICATION

2007 Mack Trucks, Inc.
The information in this brochure was accurate as of the day of publication. Mack
Trucks, Inc. reserves the right to make changes in specifications, equipment or
design, or to discontinue models or options without notice at any time.
ENG146 1001525_09A 09/12/2007
Printed in U.S.A.

Mp8 Export 400 C

Uploaded by

Copyright:

Available Formats

Mp8 Export 400 C

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mp8 Export 400 C

Uploaded by

Copyright:

Available Formats

Features

High Torque MAXICRUISE Diesel Engine

4th Generation Vehicle Management And Control System

V-MAC IV PRODUCTIVITY FEATURES:

V-MAC IV DRIVER CONVENIENCE FEATURES:

V-MAC IV FUEL ECONOMY FEATURES:

V-MAC IV RELIABILITY FEATURES:

Weight, Dry: (Approx.) . . . . . . . . . . . 2,460 lbs. [1 116 kg]

V-MAC IV FLEET MANAGEMENT FEATURES:

V-MAC IV SAFETY AND SECURITY FEATURES:

V-MAC IV SERVICEABILITY FEATURES:

Denotes an available option.

Mack Trucks, Inc., Allentown, Pennsylvania

Highway Applications . . . . . . . . . > 10%

@ Cruise Max. MPH . . . . . . . . . . > 0.5%

Oil/Filter Service Intervals

Refer to the MACKTRAQ electronic sales tool to

** Availability may be chassis model dependent.

A SALES ENGINEERING PUBLICATION

ENG146 1001525_09A 09/12/2007

You might also like