3HH11206AAAATQZZA03

SFP / SFP+ / XFP modules
1 Identification
2 Introduction
2
4
3 Features and Application Notes

4 General Description
5 Physical description
55
6 Labeling Information
67
7 External interfaces
8 Power
3HH 11206 AAAA TQZZA Ed 03
67
67
Released
1 / 68

1
Identification
Table 1 provides identification of optical modules that have been approved for use with
the ISAM system.
Table 1: Identification of the optical modules
Part Number
Description
3FE 29194 AA
100 Mb/s optical Ethernet 100Base-BX-D
3FE 29195 AA
100 Mb/s optical Ethernet 100Base-BX-U
3FE 25777 AA
100 Mb/s optical Ethernet 100Base-FX
3FE 25778 AA
100 Mb/s optical Ethernet 100Base-LX
3FE 29625 DA
100 Mb/s optical Ethernet 100Base-LX with SGMII interface
3FE 25772 AA
1 Gb/s optical Ethernet 1000Base-BX10-U
3FE 25772 AB
1 Gb/s optical Ethernet 1000Base-BX10-D
3FE 28785 AA
3FE 28785 AB
3FE 25775 AA
1 Gb/s optical Ethernet 1000Base-EX
3FE 25774 AA
1 Gb/s optical Ethernet 1000Base-LX
3FE 63289 AA
1 Gb/s optical Ethernet 1000Base-PX20-U
3FE 53606 AA
1 Gb/s optical Ethernet 1000Base-PX20+
3FE 66282 AA
1 Gb/s optical Ethernet 1000Base-PX20+, with embedded OTDR
3FE 25773 AA
1 Gb/s optical Ethernet 1000Base-SX
3FE 25773 CA
3FE 25771 CA
1 Gb/s optical Ethernet 1000Base-VX CWDM (32 dB) 1471 nm
3FE 29549 AA
3FE 29550 AA
3FE 29551 AA
3FE 29552 AA
3FE 29553 AA
3FE 29554 AA
3FE 29555 AA
3FE 29549 CA
3FE 25771 AA
1 Gb/s optical Ethernet 1000Base-YX CWDM (24 dB) 1471 nm
3FE 25771 AB
3FE 25771 AC
3FE 25771 AD
Released
2 / 68
Part Number
Description
3FE 25771 AE
3FE 25771 AF
3FE 25771 AG
3FE 25771 AH
3FE 64870 AA
3FE 25776 AA
1 Gb/s optical Ethernet 1000Base-ZX
3FE 25776 BA
3FE 65376 AA
1 Gb/s or 2.5 Gb/s optical Ethernet 2500Base-BX-U
3FE 65376 AB
1 Gb/s or 2.5 Gb/s optical Ethernet 2500Base-BX-D
3FE 61082 AA
1 Gb/s or 2.5 Gb/s optical Ethernet 2500Base-SX
3FE 61083 AA
1 Gb/s or 2.5 Gb/s optical Ethernet 2500Base-LX
3FE 62600 AA
10 Gb/s optical Ethernet 10GBase-LR
3FE 62600 CA
3FE 62600 DA
3FE 62600 EA
3FE 63264 AA
10 Gb/s optical Ethernet 10GBase-SR
3FE 65608 AA
3FE 65831 AA
10 Gb/s optical Ethernet 10GBase-ER
3FE 65832 AA
10 Gb/s optical Ethernet 10GBase-ZR
3FE 66274 AA
10 Gb/s optical Ethernet 10GBase-ZR DWDM
3FE 66274 AB
3FE 66274 AC
3FE 66274 AD
3FE 66274 AE
3FE 66274 AF
3FE 66274 AG
3FE 66274 AK
3FE 66274 AL
3FE 66274 AM
3FE 66274 AN
3FE 50712 CB
10 Gb/s optical Ethernet 10GBase-EX
3FE 50712 BB
10 Gb/s optical Ethernet 10GBase-LX
3FE 65107 AA
100 Mb/s optical Ethernet 100Base-BX-D (compact)
3FE 65107 DA
Released
3 / 68
Part Number
Description
3FE 65106 AA
1 Gb/s optical Ethernet 1000Base-BX-D (compact)
3FE 66131 AA
100 Mb/s / 1 Gb/s optical Ethernet 100/1000Base-BX-D (compact, dual rate)
3FE 66131 DA
3FE 63343 AA
10 Mb/s and 100 Mb/s electrical Ethernet 100Base-T
3FE 28784 AA
10 Mb/s, 100 Mb/s, and 1 Gb/s electrical Ethernet 1000Base-T
3FE 64927 AA
3FE 61681 AA
E1 Ethernet bridging SFP
3FE 67231 AA
E1/T1 TDM Pseudowire SFP
3FE 61682 AA
3FE 53441 AA
GPON OLT optical module class B+
3FE 53441 AC
3FE 53441 BA
GPON OLT optical module class C+
3FE 66247 AA
STM-1/OC3 Ethernet bridging SFP
3FE 66606 AC
10 Gb/s EPON XFP PRX30 (asymmetric: DS: 10 Gb/s, 1 Gb/s; US: 1Gb/s)
3FE 66606 AD
10 Gb/s EPON XFP PR30 (symmetric: DS: 10 Gb/s, 1 Gb/s; US: 10Gb/s, 1 Gb/s)
3FE 54823 AA
GPON SFP ONT (O-010S-P)
Introduction
An SFP, SFP+ or XFP module is a modular transceiver that provides an interface for
connecting optical Ethernet cables, optical Gigabit Ethernet cables, or electrical Gigabit
Ethernet cables to or within the ISAM system. SFP, SFP+ or XFP modules are used for
network links, subtending links and user interface links that connect to ISAM shelves and
SEMs. All SFP, SFP+ or XFP modules used for the ISAM system must be Alcatel-Lucent
approved.
Features and Application Notes

All modules:
are installed in SFP ports in the ISAM shelves and SEMs

are hot swappable
have a bail latch
have a rubber cap that should be kept in place until the optical module is about to be
installed
are eye safe (Class 1 Laser Safety)
comply with the SFP Multi-Source Agreement
are compliant with the regulations of Reduction of Hazardous Substances (RoHS) and
Waste Electrical and Electronic Equipment (WEEE).
Released
4 / 68

The SFP, SFP+ and XFP modules for optical connections:
use a duplex or simplex LC optical interface

contain LOS output and TX disable input
are compatible with the IEEE 802.3 specification:
the 100Base-LX optical module is compatible with the IEEE 802.3 (Clause 58) Fast
Ethernet 100Base-LX PMD specification
the 1000Base-SX optical module is compatible with the IEEE 802.3 (Clause 38) Gigabit
Ethernet 1000Base-SX PMD specification.
the 10GBase-ZR DWDM optical module is compatible with the IEEE 802.3-2008
10Gigabit Ethernet Base-EX PMD specification.
All other SFP, SFP+ and XFP modules are compatible with the IEEE 802.3 (Clause 38)
Gigabit Ethernet 1000Base-LX PMD specification.
The GPON OLT optical modules for optical connections:
uses a SC/UPC optical interface.

is compliant with G.984.2
is designed for GPON applications.
The GPON SFP ONT O-010S-P (code 3FE 54823 AA) is a Gigabit Passive Optical
Network (GPON) Small Form Factor Pluggable (SFP) with embedded ONT
functionality. From the perspective of the ISAM OLT this item is an ONT (O-010SP) and as such it is documented in full in the ONT Product Information manual of the
ISAM ONT customer documentation.
The PX20+ optical modules for optical connections:

is compliant with MII CTC standards and IEEE 802.3ah
is designed for Gigabit Ethernet 1000Base-PX applications.
has variants that support Optical Time Domain Reflectometry (OTDR) used to detect
faults and degradations on optical links (OTDR variant only).
The PRX30 XFP modules for optical connections:

is designed for EPON applications.
The optical module for 1000Base-T:
uses an RJ-45 electrical interface

contains TX disable input
is compatible with the IEEE 802.3 Gigabit Ethernet 10/100/1000Base-T PMD
specification.
Released
5 / 68

The E1 Ethernet bridging optical module for electrical connections:

is designed for E1 to Gigabit Ethernet applications
The E3 Ethernet bridging optical module for electrical connections:
uses a DIN 1.0/2.3 coax electrical interface

is designed for E3 to Gigabit Ethernet applications
The STM-1/OC3 Ethernet bridging optical module for optical connections:
use a duplex LC optical interface

is designed for STM1 or OC3 applications.
is compatible with the ITU-T G.957 S-1.1, GR-253-core IR-1, ITU-T G.707
specifications.
The E1/T1 TDM Pseudowire optical module for electrical connections:

supports the following applications:
Leased Line services over PSN
PBX interconnect
Backhaul legacy data services over PSN
is a dual-channel module supporting up to two E1/T1 ports per SFP
is software programmable for E1/T1
supports structure agnostic Circuit Emulation Service (CES)
supports TDM payload encapsulation according MEF8 standard
Restrictions
The following restrictions apply for the 100Base-T electrical SFP:
Deployment of NELT-A boards equipped with this SFP in a 7330 ISAM FTTN FD
system, limits the EMC level of the system to EN 55022 CISPR22 Class A.
Deployment of NELT-A boards equipped with this SFP is limited to two NELT-A
boards per subrack due to cabling space restrictions in the rack.
The maximum ambient temperature for deployment of NELT-A boards equipped with
this SFP in a single shelf configuration in a Central Office (CO) environment is 45C.
The maximum ambient temperature for deployment of NELT-A boards equipped with
this SFP in a dual 7302 ISAM FD subrack configuration in a CO environment is 35C.
Released
6 / 68

The following restrictions apply for the E1 Ethernet bridging SFP:
This SFP is supported in the 7356 ISAM FTTB shelf when deployed in stand-alone
mode (that is, when the 7356 ISAM FTTB is equipped with an NT board). This SFP
is not supported in the 7356 ISAM FTTB shelf when deployed in distributed mode.
The following restrictions apply for the E3 Ethernet bridging SFP:
This SFP is supported in the 7356 ISAM FTTB shelf when deployed in stand-alone
mode (that is, when the 7356 ISAM FTTB is equipped with an on-board NT board).
This SFP is not supported in the 7356 ISAM FTTB shelf when deployed in
distributed mode.
The following restrictions apply for the 2E1/T1 TDM Pseudowire SFP:
The SFP module itself does not support ITU-T K.20. An external protector is needed
for the SFP to be ITU-T K.20 compliant.
The deployment of the 2E1-SFP limits the EMC level of the system to EN 55022
CISPR22 Class A.
Released
7 / 68

4
General Description
Optical modules provide an interface for optical Ethernet, optical Gigabit Ethernet, or
electrical Gigabit Ethernet connectivity for ISAM units that have SFP ports. Only
Alcatel-Lucent approved optical modules should be installed in the ISAM system.
For an overview of the cards supporting optical modules; see the Product Information
manual of your system.
The following types of optical modules are supported:
Fast Ethernet optical modules for optical connections

Gigabit Ethernet optical modules for optical connections
2.5Gigabit Ethernet optical modules for optical connections
10Gigabit Ethernet SFP+ modules for optical connections
10Gigabit Ethernet XFP modules for optical connections
GPON OLT optical module for optical connections
10Gigabit EPON XFP modules for optical connections
Compact optical modules for optical connections
PX20+ optical module for optical connections
Ethernet optical modules for electrical connections
The following types of Ethernet-TDM interworking modules are supported:
E1 Ethernet bridging optical modules

E1/T1 TDM pseudowire SFP
STM-1/OC3 Ethernet bridging optical module
Optical Time Domain Reflectometry (OTDR)

Some optical modules support OTDR:
The embedded OTDR measurement capability injects a series of optical pulses into one
end of a fiber and extracts the scattered, or reflected light back from points along the fiber.
The OTDR functionality monitors the optical path and measures the length of the fiber as
well as any breaks or degradations within the fiber. These measurements can be used for
finding faults, including splice and mated connector losses on installed systems.
Overview of optical parameters

Table 2 lists the optical parameters for the Alcatel-Lucent approved optical modules for
use with the ISAM. The listed optical modules all provide an LC connector and are full
duplex.
Released
8 / 68

Table 2: Optical parameters for Alcatel-Lucent approved optical modules
Part Number
Description
Wavelength
Reach
Operating
Temperature
Optical
Budget
Fiber
mode
10 km
-40C to + 85C
14.2 dB
SMF
10 km
-40C to + 85C
14.2 dB
SMF

3FE 29194 AA
100 Mb/s Ethernet

100Base-BX-D
Tx: 1550 nm
100 Mb/s Ethernet

100Base-BX-U
Tx: 1310 nm
3FE 25777 AA
100 Mb/s Ethernet

100Base-FX
1310 nm
550 m
-40C to + 85C
12 dB
MMF
3FE 25778 AA
100 Mb/s Ethernet

100Base-LX
1310 nm
15 km
-40C to + 85C
16 dB
SMF
3FE 29625 DA
100 Mb/s Ethernet

100Base-LX with
SGMII interface
1310 nm
15 km
-40C to + 85C
13 dB
SMF
10 km
-40C to + 85C
10.5 dB
SMF
10 km
-40C to + 85C
10.5 dB
SMF
40 km
-40C to + 85C
19 dB
SMF
40 km
-40C to + 85C
19 dB
SMF
3FE 29195 AA
Rx: 1310 nm
Rx: 1550 nm

3FE 25772 AA
3FE 25772 AB
3FE 28785 AA
1 Gb/s Ethernet
1000Base-BX-10-U
Tx: 1310 nm
1 Gb/s Ethernet
1000Base-BX10-D
Tx: 1490 nm
1 Gb/s Ethernet
1000Base-BX40-U
Tx: 1310 nm
Rx: 1490 nm
Rx: 1310 nm
Rx: 1550 nm
(3FE 28785 AA)

3FE 28785 AB
1 Gb/s Ethernet
1000Base-BX40-D
Tx: 1550 nm
Rx: 1310 nm
(3FE 28785 AB)

3FE 25774 AA
1 Gb/s Ethernet
1000Base-LX
1310 nm
10 km
-40C to + 85C
11 dB
SMF
3FE 25775 AA
1 Gb/s Ethernet
1000Base-EX
1310 nm
40 km
-40C to + 85C
18 dB
SMF
3FE 63289 AA
1 Gb/s Ethernet
1000Base-PX20-U
Tx: 1310 nm
20 km
-10C to + 70C
26 dB
SMF
3FE 25773 AA
1 Gb/s Ethernet
1000Base-SX
850 nm
550 m
-40C to + 85C
7 dB
MMF
3FE 25773 CA
1 Gb/s Ethernet
1000Base-SX
850 nm
550 m
-10C to + 85C
7 dB
MMF
3FE 25771 CA
1 Gb/s Ethernet
1000Base-VX CWDM
1471 nm
120 km
-40C to + 85C
31 dB
SMF
3FE 29549 CA
Rx: 1490 nm
1491 nm
Released
9 / 68
Part Number
Description
Wavelength
Reach
Operating
Temperature
Optical
Budget
Fiber
mode
3FE 25771 AA
1 Gb/s Ethernet
1000Base-YX CWDM
1471 nm
62 km
-40C to + 85C
22 dB
SMF
120 km
-40C to + 85C
32 dB
SMF
3FE 25771 AB
1491 nm
3FE 25771 AC
1511 nm
3FE 25771 AD
1531 nm
3FE 25771 AE
1551 nm
3FE 25771 AF
1571 nm
3FE 25771 AG
1591 nm
3FE 25771 AH
1611 nm
3FE 29549 AA
3FE 29550 AA
1 Gb/s Ethernet
1000Base-VX CWDM
1491 nm
1511 nm
3FE 29551 AA
1531 nm
3FE 29552 AA
1551 nm
3FE 29553 AA
1571 nm
3FE 29554 AA
1591 nm
3FE 29555 AA
1611 nm
3FE 64870 AA
1471 nm
3FE 25776 AA
1 Gb/s Ethernet
1000Base-ZX
1550 nm
80 km
-40C to + 85C
24 dB
SMF
3FE 25776 BA
1 Gb/s Ethernet
1000Base-ZX
1550 nm
80 km
-25C to + 85C
24 dB
SMF
10 km
-40C to + 85C
9 dB
SMF
10 km
-40C to + 85C
9 dB
SMF

3FE 65376 AA
1 Gb/s or 2.5 Gb/s

Ethernet 2500BaseBX-U
Tx: 1310 nm
1 Gb/s or 2.5 Gb/s

Ethernet 2500BaseBX-D
Tx: 1490 nm
3FE 61082 AA
1 Gb/s or 2.5 Gb/s

Ethernet 2500BaseSX
1310 nm
7 km
-40C to + 85C
7 dB
SMF
3FE 61083 AA
1 Gb/s or 2.5 Gb/s

Ethernet 2500BaseLX
1310 nm
20 km
-40C to + 85C
10.5 dB
SMF
40 km
-40C to + 85C
15 dB
SMF
3FE 65376 AB
Rx: 1490 nm
Rx: 1310 nm
10Gigabit Ethernet optical modules for optical connections

3FE 65831 AA
10 Gb/s Ethernet
10GBase-ER
1550 nm
Released
10 / 68
Part Number
Description
Wavelength
Reach
Operating
Temperature
Optical
Budget
Fiber
mode
3FE 62600 AA
10 Gb/s Ethernet
10GBase-LR
1310 nm
10 km
-40C to + 85C
10 dB
SMF
1310 nm
10 km
-5C to + 85C
10 dB
SMF
3FE 62600 DA
1310 nm
10 km
0C to + 70C
10 dB
SMF
3FE 62600 EA
1310 nm
10 km
-40C to + 85C
10 dB
SMF
850 nm
0.3 km
0C to + 70C
11 dB
SMF
850 nm
0.3 km
-40C to + 85C
11 dB
SMF
3FE 62600 CA
3FE 65608 AA
3FE 63264 AA
10 Gb/s Ethernet
10GBase-SR
3FE 65832 AA
10 Gb/s Ethernet
10GBase-ZR
1550 nm
80 km
-40C to + 85C
24 dB
SMF
3FE 66274 AA
10 Gb/s Ethernet
10GBase-ZR DWDM
1529.55 nm
80 km
-40C to + 85C
24 dB
SMF
1530.33 nm
80 km
-5C to +70C
24 dB
SMF
3FE 66274 AC
1531.12 nm
80 km
-5C to +70C
24 dB
SMF
3FE 66274 AD
1531.90 nm
80 km
-5C to +70C
24 dB
SMF
3FE 66274 AF
1533.47 nm
80 km
-5C to +70C
24 dB
SMF
3FE 66274 AG
1534.25 nm
80 km
-5C to +70C
24 dB
SMF
3FE 66274 AK
1537.40 nm
80 km
-5C to +70C
24 dB
SMF
3FE 66274 AL
1538.19 nm
80 km
-5C to +70C
24 dB
SMF
3FE 66274 AM
1538.98 nm
80 km
-5C to +70C
24 dB
SMF
3FE 66274 AN
1539.77 nm
80 km
-5C to +70C
24 dB
SMF
3FE 66274 AB
3FE 50712 CB
10 Gb/s Ethernet
10GBase-EX
1550 nm
40 km
-40C to + 85C
11 dB
SMF
3FE 50712 BB
10 Gb/s Ethernet
10GBase-LX
1310 nm
10 km
-40C to + 85C
6 dB
SMF
30 km
-5C to + 70C
28 dB
SMF
30 km
-40C to + 85C
28 dB
SMF
60 km
-5C to + 70C
32 dB
SMF
10 km
-40C to + 85C
9 dB
SMF
10 km
0C to + 70C
9 dB
SMF
GPON OLT optical modules for optical connections

3FE 53441 AA
3FE 53441 AC
3FE 53441 BA
GPON OLT optical

module class B+
TX: 1490 nm
GPON OLT optical

module class B+
TX: 1490 nm
GPON OLT optical

module class C+
TX: 1490 nm
RX: 1310 nm
RX: 1310 nm
RX: 1310 nm

3FE 65107 AA
3FE 65107 DA
100 Mb/s Ethernet

100Base-BX-D
(compact)
Tx: 1490 nm
100 Mb/s Ethernet

100Base-BX-D
(compact)
Tx: 1490 nm
Rx: 1310 nm
Rx: 1310 nm
Released
11 / 68
Part Number
Description
Wavelength
Reach
Operating
Temperature
Optical
Budget
Fiber
mode
3FE 65106 AA
1 Gb/s Ethernet
100Base-BX-D
(compact)
Tx: 1550 nm
10 km
-40C to + 85C
14 dB
SMF
100 Mb/s / 1 Gb/s

Ethernet 100Base-BXD (compact, dual rate)
Tx: 1490 nm
10 km
-40C to + 85C
9 dB (1000Base-BX10)
SMF
100 Mb/s / 1 Gb/s

Ethernet 100Base-BXD (compact, dual rate)
Tx: 1490 nm
3FE 66131 AA
3FE 66131 DA
Rx: 1310 nm
Rx: 1310 nm
8 dB (100Base-BX10)
10 km
0C to + 70C
Rx: 1310 nm
9 dB (1000Base-BX10)
SMF
8 dB (100Base-BX10)
PX20+ optical modules for optical connections

3FE 53606 AA
3FE 66282 AA
1 Gb/s Ethernet
1000Base-PX20+
Tx: 1490 nm
1 Gb/s Ethernet
1000Base-PX20+,
with embedded OTDR
Tx: 1490 nm
20 km
0C to + 70C
29 dB
SMF
20 km
0C to + 70C
29 dB
SMF
20 km
0C to + 70C
29 dB
SMF
20 km
0C to + 70C
29 dB
SMF
15 km
-40C to + 70C
12 dB
SMF
Rx: 1310 nm
Rx: 1310 nm
10Gigabit EPON OLT XFP modules for optical connections

3FE 66606 AC
3FE 66606 AD
10 Gb/s EPON XFP

PRX30 (asymmetric:
DS: 10 Gb/s, 1 Gb/s;
US: 1Gb/s)
10G Rx: 1270 nm
10 Gb/s EPON XFP

PR30 (symmetric: DS:
10 Gb/s, 1 Gb/s; US:
10Gb/s, 1 Gb/s)
10G Tx: 1577 nm
1G Tx: 1490 nm
1G Rx: 1310 nm
10G Rx: 1270 nm

1G Tx: 1490 nm
1G Rx: 1310 nm
STM-1/OC3 Ethernet Bridging SFP optical module

3FE 66247 AA
STM-1
1310 nm

The ISAM supports the following Fast Ethernet optical module for optical connections:
100Base-BX-D
100Base-BX-U
100Base-FX
100Base-LX
100Base-LX with SGMII interface
100Base-BX-D
Table 3 lists the modules.
Released
12 / 68

Table 3: Identification of the 100Base-BX-D optical modules
Part Number
Description
3FE 29194 AA
100 Mb/s optical Ethernet 100Base-BX-D
Table 4 lists the parameters.

Table 4: 100Base-BX-D optical module parameters
Parameter
Minimum
Typical
Maximum
-40C
+85C
-40C
+85C
Supply voltage
3.135 V
3.3 V
3.465 V
Total Current (Icc)
300 mA
Operating data rate
10 Mb/s
155 Mb/s
Optical output power
-14 dBm
-11 dBm
-8 dBm
Center wavelength
1480 nm
1550 nm
1580 nm
Spectral width (20dB)
140 nm
Extinction ratio
6 dB
Optical rise/fall time (10% to 90%)
2.0 ns
Optical Output Power for OFF Transmitter
-45.0 dBm
Transmitter output eye
IEEE802.3 Clause 58 and SONET/SDH compliant
Absolute Maximum Ratings

Storage temperature
Operating case
temperature(1)
Transmitter Performance Characteristics
Receiver Performance Characteristics

Receiver Power Low(2)
-22 dBm
-19.5 dBm
-3 dBm
LOS Hysteresis
0.5 dB
Wavelength of Operation
1480 nm
1500 nm
Receiver Power High
(2)
Notes
(1)
Measured on top side of the optical module at the front center vent hole of the cage
(2)
Specified at 10-12 BER, PRBS 27.
100Base-BX-U
Released
13 / 68

Table 5: Identification of the 100Base-BX-U optical modules
Part Number
Description
3FE 29195 AA
100 Mb/s optical Ethernet 100Base-BX-U

Table 6: 100Base-BX-U optical module parameters
Parameter
Minimum
Typical
Maximum
-40C
+85C
-40C
+85C
Supply voltage
3.135 V
3.3 V
3.465 V
Total Current (Icc)
300 mA
Operating data rate
10 Mb/s
155 Mb/s
-14 dBm
-11 dBm
-8 dBm
Center wavelength
1260 nm
1310 nm
1360 nm
Spectral width (FWHM)
140 nm
2.0 ns
-45.0 dBm
IEEE802.3 Clause 58 and SONET/SDH compliant

Storage temperature
Operating case
temperature(1)

Receiver Power Low(2)
-28.2 dBm
-8 dBm
LOS Hysteresis
0.5 dB
4 dB
1450 nm
1550 nm
1580 nm
Receiver Power High
(2)
Notes
(1)
(2)
Specified at 10-12 BER, PRBS 27.
100Base-FX
Released
14 / 68

Table 7: Identification of the 100Base-FX optical modules
Part Number
Description
3FE 25777 AA
100 Mb/s optical Ethernet 100Base-FX

Table 8: 100Base-FX optical module parameters
Parameter
Minimum
Typical
Maximum
-40C
+85C
-5C
+85C
0V
+5.0V
125 Mb/s
Optical output power(3)
-19.0 dBm
-16.0 dBm
-14.0 dBm
Center wavelength
1270 nm
1310 nm
1380 nm
140 nm
Extinction ratio
10 dB
0.6 ns
3.0 ns
-45.0 dBm
Duty Cycle Distortion Jitter (peak-to-peak)
1.0 ns
Data Dependant Jitter (peak-to-peak)
0.6 ns
0.76 ns

Storage temperature
temperature(1)
Operating case
Supply voltage
Operating data
rate(2)
Random Jitter
(peak-to-peak)(4)
(5)
Typically compliant with OC-3/STM-1 eye mask

(GR-253-CORE and G.957) without filter, but not
guaranteed and not tested for

Minimum input optical power (2.5 x 10-10 BER)(6)
-32.5 dBm
-34.5 dBm
-14.0 dBm
0 dBm
LOS thresholds, increasing light input
-22.5 dBm
LOS thresholds, decreasing light input
-45.0 dBm
LOS timing delay, increasing light input
LOS timing delay, decreasing light input
LOS Hysteresis
0.5 dB
Contributed Duty Cycle Distortion Jitter (peak-topeak)
0.4 ns
Maximum input optical power (10
-12
(6)
BER)
Released
15 / 68
Parameter
Contributed Data Dependant Jitter (peak-to-peak)
Contributed Random Jitter (peak-to-peak)
(4)
Minimum
Typical
Maximum
1.0 ns
2.14 ns
1100 nm
1600 nm
Notes
(1)
(2)
Data ranges from 50 Mb/s to 266 Mb/s. However, some degradation may be incurred in overall
performance.
(3)
Measured average power coupled into 62.5/125 m, 0.275 NA graded-index multimode fiber. The
minimum power is specified at Beginning-of-Life.
(4)
Defined as 12.6 times the rms value per FDDI PMD.
(5)
Compliance with the Optical Pulse Envelope in FDDI PMD is not specified and not claimed.
(6)
Specified in average optical input power and measured with 223-1 PRBS at 125 Mb/s and 850 nm
wavelength for MM and 1310 nm for SM with optical input rise/fall time of 2.5 ns and optimum sampling.
100Base-LX

Table 9: Identification of the 100Base-LX optical modules
Part Number
Description
3FE 25778 AA
100 Mb/s optical Ethernet 100Base-LX

Table 10: 100Base-LX optical module parameters
Parameter
Minimum
Typical
Maximum
Storage temperature
-40C
+85C
Operating case temperature(1)
-5C
+85C
Supply voltage
0V
+5.0V
Operating data rate(2)
125 Mb/s
-15.0 dBm
-8.0 dBm
Center wavelength
1270 nm
1310 nm
1380 nm
7.7 nm
Extinction ratio
8.25 dB
0.6 ns
3.0 ns
-45.0 dBm
Released
16 / 68
Parameter
Minimum
Typical
Maximum
Duty Cycle Distortion Jitter (peak-to-peak)
1.0 ns
Data Dependant Jitter (peak-to-peak)
0.6 ns
0.76 ns
Random Jitter
(peak-to-peak)(4)
Transmitter output
eye(5)
Typically compliant with OC-3/STM-1 eye mask

(GR-253-CORE and G.957) without filter, but not
guaranteed and not tested for

Minimum input optical power (2.5 x 10-10
BER)(6)
-31.0 dBm
-34.5 dBm
Maximum input optical power (10-12 BER)(6)
0 dBm
-8.0 dBm
-34.0 dBm
-45.0 dBm
LOS Hysteresis
0.5 dB
Contributed Duty Cycle Distortion Jitter (peakto-peak)
0.4 ns
Contributed Data Dependant Jitter (peak-topeak)
1.0 ns
Contributed Random Jitter (peak-to-peak)(4)
2.14 ns
1260 nm
1580 nm
Notes
(1)
(2)
performance.
(3)
Measured average power coupled into 62.5/125 m, 0.275 NA graded-index multimode fiber. The
minimum power is specified at Beginning-of-Life.
(4)
Defined as 12.6 times the rms value per FDDI PMD.
(5)
Compliance with the Optical Pulse Envelope in FDDI PMD is not specified and not claimed.
(6)
Specified in average optical input power and measured with 223-1 PRBS at 125 Mb/s and 850 nm
wavelength for MM and 1310 nm for SM with optical input rise/fall time of 2.5 ns and optimum sampling.
100Base-LX with SGMII interface

Table 11: Identification of the 100Base-LX optical modules (with SGMII interface)
Part Number
Description
3FE 29625 DA
100 Mb/s optical Ethernet 100Base-LX with SGMII interface
Released
17 / 68

Table 12: 100Base-LX optical module (with SGMII) parameters
Parameter
Minimum
Typical
Maximum
Storage temperature
-40C
+85C
Operating case temperature
-40C
+85C
Supply voltage
3.10 V
3.30 V
3.50 V
Power Supply Current (Icc)
350 mA
Operating data rate
125 Mb/s
Operating Relative Humidity
5%
95%
Mean Wavelength ()
1270 nm
1310 nm
1355 nm
Average Output Power (Pout)
-15 dBm
-8 dBm
Average Output Power Tx Disabled (Poff)
-45 dBm
Maximum RMS Width ()
7.7 nm
Extinction Ratio (ER)
9 dB
Optical Rise time (20% to 80% values) (tr)
3 ns
Optical Fall time (20% to 80% values) (tf)
3 ns
Output Optical Eye
IEEE 802.3ah-2004 compliant

Mean Wavelength ()
1260 nm
1310 nm
1570 nm
)(1)
-28 dBm
)(1)
-8 dBm
Return Loss
12 dB
LOS De-assert
-29 dBm
LOS Assert
-45 dBm
LOS hysteresis
0.5 dB
4.5 dB
Receiver Sensitivity (Rsens,low

Receiver Overload (Rsens,high
Notes
(1)
at 10-12 BER, PRBS 27-1
Released
18 / 68

The ISAM supports the following Gigabit Ethernet optical modules for optical
connections:
1000Base-BX10-U, 1000Base-BX10-D, 1000Base-BX40-U, 1000Base-BX40-D

1000Base-EX
1000Base-LX
1000Base-PX20-U
1000Base-SX
1000Base-VX CWDM
1000Base-YX CWDM
1000Base-ZX
1000Base-BX10-U, 1000Base-BX10-D, 1000Base-BX40-U, 1000Base-BX40-D

Table 13: Identification of the 1000Base-BXxx-D/U optical modules
Part Number
Description
3FE 25772 AA
3FE 25772 AB
3FE 28785 AA
3FE 28785 AB

Table 14: 1000Base-BX optical modules
Parameter
Minimum
Typical
Maximum
Supply voltage (Vcc)
3.135 V
3.3 V
3.465 V
Total Current (Icc)
300 mA
-40C
+85C
Storage Temperature (Tstg)
-40C
+85C
Data Rate (DR)
1250 Mbps
General Operation Parameters
Operating Temperature (case)

(Topr)
3FE 25772 AA
3FE 25772 AB
3FE 28785 AA
3FE 28785 AB
Transmitter Specifications
Released
19 / 68
Parameter
Minimum
Typical
Maximum
-9.0 dBm
-6.0 dBm
-3.0 dBm
-5.0 dBm
-2.5 dBm
0 dBm
Optical crosstalk (XT)
-45 dB
-40 dB
Average Launch power of off Tx (Poff)
-45 dBm
6.0 dB
9.0 dB
Optical output power (Pop)
3FE 28785 AA
3FE 28785 AB
3FE 25772 AA
3FE 25772 AB
3FE 25772 AA
3FE 25772 AB
3FE 28785 AA
3FE 28785 AB
Eye Mask
IEEE 802.3 clause 59 compliant
260 ps
260 ps
Mean Wavelength ()
3FE 25772 AA
1260 nm
1310 nm
1360 nm
3FE 25772 AB
1480 nm
1490 nm
1500 nm
3FE 28785 AA
1260 nm
1310 nm
1360 nm
3FE 28785 AB
1500 nm
1550 nm
1600 nm
Spectral Width (20dB) ()
Relative Intensity Noise (RIN)
-120 dB/Hz
Transmitter Reflectance
-12 dB
Reflection Tolerance (rp)
12 dB
3FE 25772 AA
-22 dBm
-19.5 dBm
3FE 25772 AB
-22 dBm
-19.5 dBm
3FE 28785 AA
-26 dBm
-24 dBm
3FE 28785 AB
-26 dBm
-24 dBm
Receiver Power High (Rsens,high)
-3 dBm
Damage Threshold for Receiver (Pin,damage)
0 dBm
Wavelength ()
3FE 25772 AA
1480 nm
1500 nm
3FE 25772 AB
1260 nm
1360 nm
3FE 28785 AA
1500 nm
1600 nm
3FE 28785 AB
1260 nm
1360 nm
LOS Assert
-45 dBm
LOS De-assert
-20 dBm
Receiver specifications
Receiver Power Low (Rsens,low)(1)
Released
20 / 68
Parameter
Minimum
Typical
Maximum
LOS hysteresis
0.5 dB
Receiver Reflectance
-12 dB
Note
(1)
at 10-12 BER, PRBS 27-1
1000Base-EX

Table 15: Identification of the 1000Base-EX optical modules
Part Number
Description
3FE 25775 AA
1 Gb/s optical Ethernet 1000Base-EX

Table 16: 1000Base-EX optical module parameters
Parameter
Minimum
Typical
Maximum
-40C
+85C
-5C
+85C
Supply voltage
0V
+5.0V
Input voltage
0V
+5.0V
Operating data rate
1250 Mb/s
-4.5 dBm
0 dBm
TX wavelength
1260 nm
1310 nm
1360 nm
Center wavelength
1280 nm
1310 nm
1335 nm
Spectral width (-20dB)
1.0 nm
Side mode suppression ratio
30 dB
Extinction ratio
9 dB
Deterministic jitter
80 ps
Total jitter
227 ps
Relative intensity noise
-120 dB/Hz

Storage temperature
Operating case
temperature(1)
Dispersion
penalty(3)
Released
21 / 68
Parameter
Minimum
Typical
Maximum
Compliant with IEEE 802.3z and FC-PI eye mask

1250 Mb/s
-22.5 dBm
-3.0 dBm(5)
-22.5 dBm
-35.0 dBm
LOS Hysteresis
0.5 dB
170 ps
Total jitter
266 ps
Wavelength of operation
1100 nm
1600 nm
Optical return loss
12 dB
Electrical 3 dB upper cut-off frequency
1500 MHz
Compliant with IEEE 802.3z standard
Input optical power
(10-12
BER)(2)
Notes
(1)
Measured on top side of the optical module at the front center vent hole of the cage.
(2)
Measured average power coupled into single mode fiber.
(3)
Specified at 1360 ps/nm dispersion, which corresponds to the approximate worst-case dispersion for 62
km G652 fiber over the wavelength range of 1464.5 to 1617.5 nm.
(4)
performance.
(5)
Measured with 27-1 PRBS at 1250 Mb/s and 1310 nm.
1000Base-LX

Table 17: Identification of the 1000Base-LX optical modules
Part Number
Description
3FE 25774 AA
1 Gb/s optical Ethernet 1000Base-LX

Table 18: 1000Base-LX optical module parameters
Parameter
Minimum
Typical
Maximum
Released
22 / 68
Parameter
Minimum
Typical
Maximum
-40C
+85C
-5C
+85C
Supply voltage
0V
+5.0V
Operating data rate
1250 Mb/s
-9.0 dBm
-3.0 dBm
TX wavelength
1260 nm
1310 nm
1360 nm
Center wavelength
1274 nm
1310 nm
1360 nm
4.0 nm
Extinction ratio
9 dB
80 ps
Total jitter
227 ps
-120 dB/Hz
Storage temperature
(1)

1250 Mb/s
-22.0 dBm
-3.0 dBm(5)
-22.0 dBm
-30.0 dBm
LOS Hysteresis
0.5 dB
170 ps
Total jitter
266 ps
1100 nm
1600 nm
Optical return loss
12 dB
1500 MHz
Input optical power
(10-12
BER)(2)
Notes
(1)
(2)
(3)
(4)
Data ranges from 125 Mb/s to 1300 Mb/s.
(5)
1000Base-PX20-U
Released
23 / 68

Table 19: Identification of the 1000Base-PX20-U optical modules
Part Number
Description
3FE 63289 AA
1 Gb/s optical Ethernet 1000Base-PX20-U

Table 20: 1000Base-PX20-U Parameters
Parameter
Minimum
Typical
Maximum
-20C
+85C
-10C
+75C
Supply voltage
+3.135 V
+3.3V
+3.465V
Operating data rate
1250 Mb/s
Optical power (Pop)
-1.0 dBm
+0.5 dBm
+4 dBm
Average launch power of off Tx (Poff)
-45 dBm
Extinction ratio
6.0 dB
Eye mask
IEEE802.3ah
512 ps
Optical Fall time (20% to 80% values) (tr)
512 ps
Mean wavelength ()
1260 nm
1310 nm
1360 nm
Spectral width (20 dB) ()
=1304:
<2.42nm

Storage temperature
Operating case
temperature(1)
=1305:
<2.55nm
=1308/1317:
<3nm
Transmitter reflectance
-6 dB
Reflection tolerance
-15 dB
Receiver Power Low (Rsens,low)
-26 dBm
-24 dBm
Receiver Power High (Rsens,high)
-3 dBm
+4 dBm
Wavelength ()
1480 nm
1500 nm
LOS assert
-39 dBm
LOS de-assert)
-26 dBm
Receiver reflectance
-12 dBm
Released
24 / 68

1000Base-SX

Table 21: Identification of the 1000Base-SX optical modules
Part Number
Description
3FE 25773 AA
3FE 25773 CA

Table 22: 1000Base-SX optical module parameters
Parameter
Minimum
Typical
Maximum
-40C
+85C
3FE 25773 AA
-40C
+85C
3FE 25773 CA
-10C
+85C
Supply voltage
0V
+5.0V
Input voltage
0V
+5.0V
Operating data rate
1250 Mb/s
-9.5 dBm
-7.0 dBm
-4.0 dBm
Center wavelength
820 nm
850 nm
860 nm
0.85 nm
Extinction ratio
9 dB
80 ps
Total jitter
227 ps
-117 dB/Hz
Dispersion penalty
Compliant with IEEE 802.3z

Storage temperature
Operating case
temperature(1)
(3)

1250 Mb/s
-17.0 dBm
0 dBm(5)
-22.0 dBm
-30.0 dBm
Input optical power (10
-12
(2)
BER)
Released
25 / 68
Parameter
Minimum
Typical
Maximum
LOS Hysteresis
0.5 dB
170 ps
Total jitter
266 ps
770 nm
860 nm
Optical return loss
12 dB
1500 MHz
Notes
(1)
(2)
(3)
(4)
Data ranges from 1000 Mb/s to 1300 Mb/s for SX MM. However, some degradation may be incurred in
overall performance.
(5)
Measured with 27-1 PRBS at 1250 Mb/s and 850 nm wavelength for SX MM.
1000Base-VX CWDM
The Gigabit Ethernet optical modules in the 1000Base-VX CWDM series have different
center wavelength values and are identified by the color of the optical module latch. The
wavelength granularity of 1000Base-VX CWDM optical modules is very coarse. Table
23 lists the minimum and maximum acceptable wavelength values for each 1000BaseVX CWDM optical module and the corresponding latch color. The 1000Base-VX
CWDM optical modules are listed according to their center wavelength value.
Table 23: 1000Base-VX CWDM optical modules
Part Number
Wavelength
Minimum
Maximum
Latchcolor
3FE 25771 CA
1471 nm
1464.5 nm
1477.5 nm
Gray
3FE 29549 CA
1491 nm
1484.5 nm
1497.5 nm
Violet
3FE 29549 AA
1491 nm
1484.5 nm
1497.5 nm
TBA
3FE 29550 AA
1511 nm
1504.5 nm
1517.5 nm
TBA
3FE 29551 AA
1531 nm
1524.5 nm
1537.5 nm
TBA
3FE 29552 AA
1551 nm
1544.5 nm
1557.5 nm
TBA
3FE 29553 AA
1571 nm
1564.5 nm
1577.5 nm
TBA
3FE 29554 AA
1591 nm
1584.5 nm
1597.5 nm
TBA
3FE 29555 A
1611 nm
1604.5 nm
1617.5 nm
TBA
3FE 64870 AA
1471 nm
1464.5 nm
1477.5 nm
TBA
Released
26 / 68

Table 24: Identification of the 1000Base-VX CWDM optical modules
Part Number
Description
3FE 25771 CA
3FE 29549 AA
3FE 29550 AA
3FE 29551 AA
3FE 29552 AA
3FE 29553 AA
3FE 29554 AA
3FE 29555 AA
3FE 29549 CA
3FE 64870 AA

Table 25: 1000Base-VX CWDM optical module parameters
Parameter
Minimum
Typical
Maximum
-40C
+85C
-5C
+85C
-40C
+85C
Supply voltage
0V
+4.5V
Input voltage
0V
+4.5V
Operating data rate
125 Mb/s
1250 Mb/s
0 dBm
+5.0 dBm
1.0 nm
30 dB
Extinction ratio
9 dB

Storage temperature
Operating case
temperature(1)
3FE 25771 CA
3FE 29549 CA
3FE 29549 AA
3FE 29550 AA
3FE 29551 AA
3FE 29552 AA
3FE 29553 AA
3FE 29554 AA
3FE 29555 AA
3FE 64780 AA
Released
27 / 68
Parameter
Minimum
Typical
Maximum
80 ps
Total jitter
227 ps
0.32 ns
-120 dB/Hz
1.0 dB
Dispersion
penalty(3)

Operating data rate
1250 Mb/s
-32.0 dBm
-10.0 dBm
-32.0 dB
-45.0 dB
100 s
100 s
LOS Hysteresis
0.5 dB
170 ps
Total jitter
266 ps
1100 nm
1620 nm
Optical return loss
12 dB
1500 MHz
-12
(2)
BER)
Notes
(1)
(2)
(3)
1000Base-YX CWDM
The Gigabit Ethernet optical modules in the 1000Base-YX CWDM series have different
center wavelength values and are identified by the color of the optical module latch. The
wavelength granularity of 1000Base-YX CWDM optical modules is very coarse. Table
26 lists the minimum and maximum acceptable wavelength values for each 1000BaseYX CWDM optical module and the corresponding latch color. The 1000Base-YX
CWDM optical modules are listed according to their center wavelength value.
Table 26: 1000Base-YX CWDM optical modules
Part Number
Wavelength
Minimum
Maximum
Latchcolor
3FE 25771 AA
1471 nm
1464.5 nm
1477.5 nm
Gray
Released
28 / 68
Part Number
Wavelength
Minimum
Maximum
Latchcolor
3FE 29549 AB
1491 nm
1484.5 nm
1497.5 nm
Violet
3FE 29550 AC
1511 nm
1504.5 nm
1517.5 nm
Blue
3FE 29551 AD
1531 nm
1524.5 nm
1537.5 nm
Green
3FE 29552 AE
1551 nm
1544.5 nm
1557.5 nm
Yellow
3FE 29553 AF
1571 nm
1564.5 nm
1577.5 nm
Orange
3FE 29554 AG
1591 nm
1584.5 nm
1597.5 nm
Red
3FE 29555 AH
1611 nm
1604.5 nm
1617.5 nm
Brown

Table 27: Identification of the 1000Base-YX CWDM optical modules
Part Number
Description
3FE 25771 AA
3FE 29549 AB
3FE 29550 AC
3FE 29551 AD
3FE 29552 AE
3FE 29553 AF
3FE 29554 AG
3FE 29555 AH

Table 28: 1000Base-YX CWDM optical module parameters
Parameter
Minimum
Typical
Maximum
-40C
+85C
-40C
+85C
Supply voltage
0V
+4.5V
Input voltage
0V
+4.5V
Operating data rate
125 Mb/s
1250 Mb/s
-2.0 dBm
+3.0 dBm
1.0 nm
30 dB

Storage temperature
Operating case
temperature(1)
Released
29 / 68
Parameter
Minimum
Typical
Maximum
Extinction ratio
9 dB
80 ps
Total jitter
227 ps
0.32 ns
-120 dB/Hz
1.5 dB
Dispersion penalty
(3)

Operating data rate
125 Mb/s
1250 Mb/s
-24.0 dBm
-3.0 dBm
-24.0 dB
-35.0 dB
100 s
100 s
LOS Hysteresis
0.5 dB
170 ps
Total jitter
266 ps
1100 nm
1620 nm
Optical return loss
12 dB
1500 MHz
Input optical power
(10-12
BER)(2)
Notes
(1)
(2)
(3)
1000Base-ZX

Table 29: Identification of the 1000Base-X optical modules
Part Number
Description
3FE 25776 AA
3FE 25776 BA
Released
30 / 68

Table 30: 1000Base-ZX optical module parameters
Parameter
Minimum
Typical
Maximum
-40C
+85C
-5C
+85C
Supply voltage
0V
+5.0V
Input voltage
0V
+5.0V
Operating data rate
1250 Mb/s
0 dBm
+5.0 dBm
30 dB
TX wavelength
1480 nm
1550 nm
1580 nm
Center wavelength
1520 nm
1550 nm
1580 nm
1.0 nm
Extinction ratio
9 dB
80 ps
Total jitter
227 ps
-120 dB/Hz
1.5 dB

Storage temperature
(1)
Dispersion penalty
(3)

1250 Mb/s
-24.0 dBm
-3.0 dBm(5)
-24.0 dBm
-35.0 dBm
LOS Hysteresis
0.5 dB
170 ps
Total jitter
266 ps
1100 nm
1600 nm
Optical return loss
12 dB
1500 MHz
-12
BER)(2)
Released
31 / 68

Notes
(1)
(2)
(3)
(4)
Data ranges from 125 Mb/s to 1300 Mb/s for ZX SM. However, some degradation may be incurred in
overall performance.
(5)

The ISAM supports the following 2.5Gigabit Ethernet optical modules for optical
connections:
2500Base-BX-U
2500Base-BX-D
2500Base-LX
2500GBase-SX
2500Base-BX-U and 2500Base-BX-D

Table 31: Identification of the 2500Base-BX-U and 2500Base-BX-D Ethernet optical modules
Part Number
Description
3FE 65376 AA
1 Gb/s or 2.5 Gb/s optical Ethernet 2500Base-BX-U
3FE 65376 AB
1 Gb/s or 2.5 Gb/s optical Ethernet 2500Base-BX-D

Table 32: General Operation Parameters
Parameter
Minimum
Typical
Maximum
3.135 V
3.3 V
3.465 V
Total Current (Icc)
300 mA
Operating Temperature (case) (Topr)
-40C
+85C
-40C
+85C
Data Rate (DR)
3215 Mbps
Optical power (Pop)
-9.0 dBm
-6.0 dBm
-3.0 dBm
Optical crosstalk (XT)
-45 dB
-40 dB
General Operational Parameters
Released
32 / 68
Parameter
Minimum
Typical
Maximum
-45 dBm
6.0 dB
Eye Mask
Compliant with IEEE 802.3z in 1G mode and

G.957 (STM16) in 2.5G mode
260 ps
260 ps
Mean Wavelength ()
3FE 65376 AA
1260 nm
1310 nm
1360 nm
3FE 65376 AB
1480 nm
1490 nm
1500 nm
Spectral Width (20dB) ()
1 nm
-120 dB/Hz
-12 dB
12 dB
3FE 65376 AA
-22 dBm
-19.5 dBm(2)
3FE 65376 AB
-22 dBm
-19.5 dBm(2)
Receiver Overload
-3 dBm
0 dBm
Wavelength ()
3FE 65376 AA
1480 nm
1490 nm
1560 nm
3FE 65376 AB
1260 nm
1310 nm
1360 nm
LOS Assert
-35 dBm
LOS De-assert
-20 dBm
LOS hysteresis
0.5 dB
-12 dB

Receiver Sensitivity(1)
Note
(1)
(2)
at 10-12 BER, PRBS 27-1

-19.5 dBm at 1G, -18 dBm at 2.5G
2500Base-LX and 2500Base-SX

Table 33: Identification of the 2500Base-BX-U and 2500Base-BX-D Ethernet optical
modules
Part Number
Description
3FE 61082 AA
1 Gb/s or 2.5 Gb/s optical Ethernet 2500Base-SX
3FE 61083 AA
1 Gb/s or 2.5 Gb/s optical Ethernet 2500Base-LX
Released
33 / 68

Table 34: 2500Base-LX and 2500Base-SX Ethernet SFP Transmitter Performance
Characteristics
Parameter
Minimum
Typical
Maximum
3125 Mb/s
3FE 61082 AA
-9.5 dBm
-7.0 dBm
-3.0 dBm
3FE 61083 AA
-8.4 dBm
-3.0 dBm
3FE 61082 AA
1280 nm
1310 nm
1360 nm
3FE 61083 AA
1280 nm
1310 nm
1360 nm
3FE 61082 AA
7.0 nm
3FE 61083 AA
4.0 nm
30
Extinction ratio
80 ps
Total jitter
227 ps
3FE 61082 AA
-120 dB/Hz
3FE 61083 AA
-118 dB/Hz
Dispersion penalty
2.0 dB
Compliant with IEEE 802.3z in 1G mode

and G.957 (STM16) in 2.5G mode

(2)
Center wavelength

3125 Mb/s
Minimum input optical power (10-12

BER)(2)
3FE 61082 AA
-17.3 dBm
3FE 61083 AA
-18.9 dBm
Maximum input optical power (10-12

BER)(2)
3FE 61082 AA
-3.0 dBm
3FE 61083 AA
-3.0 dBm
LOS
thresholds
Increasing light input
-20.0 dBm
Decreasing light input
-30.0 dBm
LOS timing
delay
100 S
100 S
LOS Hysteresis
0.5 dB
25 ps
Total jitter
64 ps
1100 nm
1600 nm
Released
34 / 68
Parameter
Minimum
Typical
Maximum
Optical return loss
12 dB
Electrical 3 dB upper cutoff frequency
Notes
(1)
Data ranges from 600 to 3125 Mbits/s. However, some degradation may be incurred in overall
performance.
(2)
Measured average power coupled into Single Mode Fiber (SMF).
10Gigabit Ethernet SFP+ modules for optical connections

The ISAM supports the following 10Gigabit Ethernet SFP+ modules for optical
connections:
10GBase-ER
10GBase-LR
10GBase-SR
10GBase-ZR

Table 35: Identification of the 1000Base-ER, -LR, -SR and -ZX optical modules
Part Number
Description
3FE 65831 AA
3FE 62600 AA
3FE 62600 CA
3FE 62600 DA
3FE 62600 EA
3FE 65608 AA
3FE 63264 AA
3FE 65832 AA
10 Gb/s optical Ethernet 10GBase-ZR

Table 36: General Operation Parameters
Parameter
Minimum
Typical
Maximum

Supply Voltage
3.13 V
3.3 V
+3.46 V
Supply Current
0.30 A
0.40 A
Power Dissipation
1.0 W
1.5 W
Released
35 / 68
Parameter
Minimum
Typical
Maximum
0V
+3.34 V
-40C
+85C
10.3125 Gb/s
-100 ppm
+100 ppm
3FE 65608 xx
-7.3 dBm
-1 dBm
3FE 63264 xx
-7.3 dBm
-1 dBm
3FE 62600 xx
-8.2 dBm
+0.5 dBm
3FE 65831 xx
-4.7 dBm
+4.0 dBm
3FE 65832 xx
0 dBm
+5.0 dBm
-30.0 dBm
3FE 65608 xx
3.0 dB
3FE 63264 xx
3.0 dB
3FE 62600 xx
3.5 dB
3FE 65831 xx
3 dB
3FE 65832 xx
8.2 dB
3FE 65608 xx
840 nm
850 nm
860 nm
3FE 63264 xx
840 nm
850 nm
860 nm
3FE 62600 xx
1260 nm
1310 nm
1360 nm
3FE 65831 xx
1530 nm
1550 nm
1565 nm
3FE 65832 xx
1530 nm
1550 nm
1565 nm
3FE 65608 xx
0.45 nm
3FE 63264 xx
0.45 nm
3FE 62600 xx
30 dB
3FE 65831 xx
30 dB
3FE 65832 xx
30 dB
-128 dB/Hz
3FE 65608 xx
12 dB
3FE 63264 xx
12 dB
3FE 62600 xx
12 dB
3FE 65831 xx
21 dB
3FE 65832 xx
21 dB
0.28 UI
Input voltage
Storage Temperature
Typical Operating Data Rate
Operating Data Rate
Average Optical Output Power (50%
duty cycle)
Transmitter OFF Power

Extinction Ratio
Centre Wavelength
RMS Spectral width
Side Mode Suppression Ratio
Relative Intensity Noise

Reflectance Tolerance
Output Jitter Generation (optical)
(1)
Released
36 / 68
Parameter
Minimum
Dispersion Penalty
Typical
Maximum
3FE 65608 xx
3.9 dB
3FE 63264 xx
3.9 dB
3FE 62600 xx
3.2 dB
3FE 65831 xx
3.0 dB
3FE 65832 xx
3.0 dB
Optical Output Eye
Compliant with IEEE 802-2008.

Typical Operating Data Rate
10.3125 Gb/s
-100 ppm
+100 ppm
3FE 65608 xx
-9.9 dBm
3FE 63264 xx
-9.9 dBm
3FE 62600 xx
-14.4 dBm
3FE 65831 xx
-15.8 dBm
3FE 65832 xx
-24 dBm
3FE 65608 xx
-1.0 dBm
3FE 63264 xx
-1.0 dBm
3FE 62600 xx
+0.5 dBm
3FE 65831 xx
-1.0 dBm
3FE 65832 xx
-8 dBm
3FE 65608 xx
-11.0 dBm
3FE 63264 xx
-11.0 dBm
3FE 62600 xx
-11.0 dBm
3FE 65831 xx
-16.0 dBm
3FE 65832 xx
-25.0 dBm
3FE 65608 xx
-30.0 dBm
3FE 63264 xx
-30.0 dBm
3FE 62600 xx
-30.0 dBm
3FE 65831 xx
-30.0 dBm
3FE 65832 xx
-38.0 dBm
Increasing Light Input
100 s
Decreasing Light Input
100 s
0.5 dB
3.0 dB
0.70 UI
Operating Data Rate

Receiver Sensitivity
(10-12
BER)
Maximum Input Optical Power
LOS
Thresholds
LOS
Timing
Delay
LOS Hysteresis
Output Total Jitter(2)
Released
37 / 68
Parameter
Minimum
Typical
Maximum
3FE 65608 xx
840 nm
850 nm
860 nm
3FE 63264 xx
840 nm
850 nm
860 nm
3FE 62600 xx
1260 nm
1310 nm
1360 nm
3FE 65831 xx
1530 nm
1550 nm
1565 nm
3FE 65832 xx
1530 nm
1550 nm
1565 nm
3FE 65608 xx
-12.0 dB
3FE 63264 xx
-12.0 dB
3FE 62600 xx
-12.0 dB
3FE 65831 xx
-12.0 dB
3FE 65832 xx
-12.0 dB
10Gigabit Ethernet SFP+ DWDM modules for optical connections

Table 37: Identification of the 10Gigabit Ethernet SFP+ DWDM modules
Part Number
Description
3FE 66274 AA
10 Gb/s optical Ethernet 10GBase-ZR DWDM 1529.55 nm
3FE 66274 AB
3FE 66274 AC
3FE 66274 AD
3FE 66274 AE
3FE 66274 AF
3FE 66274 AG
3FE 66274 AK
3FE 66274 AL
3FE 66274 AM
3FE 66274 AN
10 Gb/s optical Ethernet 10GBase-ZR DWDM 1529.55 n

Table 38: Transmitter Performance Characteristics
Parameter
Minimum
Typical
Maximum
-40C
+85C

Storage temperature
Released
38 / 68
Parameter
Minimum
Typical
Maximum
-5C
+70C
Supply voltage
0V
+3.6V
Input voltage
0V
+3.6V
- 100 ppm
10.3125 Gbps
+ 100 ppm
0 dBm
+4.0 dBm
3FE 66274 AA
1529.54 nm
1529.55 nm
1529.56 nm
3FE 66274 AB
1530.32 nm
1530.33 nm
1530.34 nm
3FE 66274 AC
1531.11 nm
1531.12 nm
1531.13 nm
3FE 66274 AD
1531.89 nm
1531.90 nm
1531.91 nm
3FE 66274 AE
1533.46 nm
1533.47 nm
1533.48 nm
3FE 66274 AF
1534.24 nm
1534.25 nm
1534.26 nm
3FE 66274 AG
1537.39 nm
1537.40 nm
1537.41 nm
3FE 66274 AK
1538.18 nm
1538.19 nm
1538.20 nm
3FE 66274 AL
1538.97 nm
1538.98 nm
1538.99 nm
3FE 66274 AM
1539.76 nm
1539.77 nm
1539.78 nm
30 dB
Extinction ratio
8.2 dB
80 ps
Total jitter
227 ps
-128 dB/Hz
Dispersion penalty
3.0 dB
Compliant with IEEE 802.3-2008 eye mask
Operating case
temperature(1)

Operating data rate
(2)

Center wavelength

Operating data rate
- 100 ppm
10.3125 Gbps
+ 100 ppm
-24.0 dBm
-8.0 dBm
-25.0 dB
-35.0 dB
100 s
100 s
LOS Hysteresis
0.5 dB
170 ps
Total jitter
266 ps
Minimum input optical power
(10-12
Maximum input optical power (10
-12
(2)
BER)
(2)
BER)
Released
39 / 68
Parameter
Minimum
Typical
Maximum
1530 nm
1565 nm
Optical return loss
24 dB
Notes
(1)
(2)
10Gigabit Ethernet XFP modules for optical connections

Table 39: Identification of the 1000Base-ER and 1000Base-LR optical modules
Part Number
Description
3FE 50712 CB
3FE 50712 BB

Table 40: 10GBase-EX and 10GBase-LX XFP module parameters
Parameter
Minimum
Typical
Maximum
Vcc3
3.13 V
3.3 V
+3.47 V
Vcc5
4.75 V
5.0 V
+5.25 V
Icc3
0.45 A
0.70 A
Icc5
0.30 A
PW3
1.5 W
2.5 W
PW5
1.6 W
Input voltage
0V
+3.34 V
Operating Case Temperature
-40C
+85C
Storage Temperature
-40C
+85C
-100 ppm
10.3125
Gb/s
+ 100 ppm

Supply Voltage
Supply Current
Power Dissipation

Operating Data Rate
Average Optical Output Power
(50% duty cycle)
3FE 50712 BB
-6.0 dBm
-3.0 dBm
-1.0 dBm
3FE 50712 CB
-1.0 dBm
+2.0 dBm
Transmitter OFF Power
3FE 50712 BB
-45.0 dBm
3FE 50712 CB
-40.0 dBm
Released
40 / 68
Parameter
Minimum
Typical
Maximum
3FE 50712 BB
6 dB
8 dB
3FE 50712 CB
8.2 dB
3FE 50712 BB
1290 nm
1310 nm
1330 nm
3FE 50712 CB
1530 nm
1550 nm
1565 nm
Centre Line width
3 nm
30 dB
3FE 50712 BB
-125 dB/Hz
3FE 50712 CB
-128 dB/Hz
-27 dB
0.1 UI
3FE 50712 BB
1.0 dB
3FE 50712 CB
2.0 dB
Extinction Ratio
Centre Wavelength
Relative Intensity Noise
Reflectance Tolerance
Output Jitter Generation
(optical)(1)
Dispersion Penalty
Optical Output Eye
Compliant with GR253-CORE, and ITU-T

G.693.

Operating Data Rate
Receiver Sensitivity (10-12 BER)
-100 ppm
10.3125
Gb/s
+ 100 ppm
3FE 50712 BB
-11.0 dBm
-14.0 dBm
3FE 50712 CB
-16.0 dBm
-1.0 dBm
+1.0 dBm
Maximum Input Optical Power

LOS
Thresholds
LOS Timing
Delay
Increasing Light
Input
3FE 50712 BB
-11.0 dBm
3FE 50712 CB
-22.0 dBm
Decreasing Light
Input
3FE 50712 BB
-21.0 dBm
3FE 50712 CB
-28.0 dBm
100 s
100 s
3FE 50712 BB
1.0 dB
3FE 50712 CB
-0.5 dB
0.34 UI
3FE 50712 BB
1260 nm
1355 nm
3FE 50712 CB
1270 nm
1600 nm
3FE 50712 BB
-14.0 dB
3FE 50712 CB
-27.0 dB
LOS Hysteresis
Output Total Jitter(2)

Notes
(1)
Jitter generation is compliant with SONET OC-192 per GR253 and G.709 per OTU-2.
(2)
Total Jitter consists of Random Jitter, Duty Cycle Distortion Periodic Jitter and ISI.
Released
41 / 68

GPON OLT optical module for optical connections
Table 41: Identification of the GPON OLT modules
Part Number
Description
3FE 53441 AA
3FE 53441 AC
3FE 53441 BA
GPON OLT optical module class C+

Table 42: Optical budgets of the GPON OLT SFP optical module
Description
Minimum
Typical
Maximum
2488.32 Mbit/s
Transmitting budgets
TX nominal bit rate
2.488 Gb/s
TX central wavelength single fibre
1480 nm
1500 nm
Mask of TX eye diagram
Per G.984.2
Minimum ORL of ODN at Olu and Old
> 32
TX extinction ratio, at industrial temperature, (-40C to

+65C system inlet air temperature) (Class B+ and C+
optics)
8.2 dB
13.0 dB
TX output power, at industrial temperature, (-40C to

+65C system inlet air temperature) (Class B+ optics)
2.0 dBm
5.0 dBm
TX output power, at commercial temperature, (-5C to

+55C) (Class C+ optics)(1)
3.0 dBm
7.0 dBm
TX spectral width
B+
0.1 nm
0.9 nm
C+
0.1 nm
0.6 nm
30 dB
1244.16 Mbit/s
TX side mode suppression

Receiving budgets
RX nominal bit rate
1.244 Gb/s
RX wavelength single and dual fibre
1260 nm
1310 nm
1360 nm
Maximum reflectance of equipment, measured at

transmitter wavelength
< -6 dB
< -6 dB
< -6 dB
Minimum ORL of ODN at Oru and Ord
> 32
RX BER
1E10-10
(1 of 2)
Released
42 / 68
Description
RX optical sensitivity
Minimum
Typical
Maximum
-28.0 dB
-32.0 dB
B+
-8.0 dBm
C+(2)
-12.0 dBm
B+
30 km(2)
C+
60 km
B+
C+
RX optical overload
Link distance
(2)
(2 of 2)
Notes
(1)
For Class C+ application, the use of FEC is mandatory for performance levels.
(2)
The optical link budget is defined by both loss and bandwidth characteristics. The loss characteristic is
determined by the difference between the optical transmitter and optical receiver for each direction.
Typically this is 28 dB. The bandwidth characteristic is reflected by the maximum link distance parameter
of each OLT and ONT transmitter specification, and is limited by the smaller of the upstream and
downstream values. Typically the limiting link distance is 30 km for Class B+ optics.
10Gigabit EPON XFP modules for optical connections

Table 43: Identification of the 10Gigabit EPON XFP modules
Part Number
Description
3FE 66606 AC
10 Gb/s EPON XFP PRX30 (asymmetric: DS: 10 Gb/s, 1 Gb/s; US: 1Gb/s)
3FE 66606 AD
10 Gb/s EPON XFP PR30 (symmetric: DS: 10 Gb/s, 1 Gb/s; US: 10Gb/s, 1 Gb/s)

Table 44: 10Gigabit EPON XFP Operation Parameters
Parameter
Minimum
Typical
Maximum
0 C
+70C
Storage Temperature
40C
+85C
Operating Relative Humidity (at 40C noncondensing)
5% RH
95% RH
Downstream Signal Rate
10.3125 Gb/s
Central Wavelength
1575 nm
1577 nm
1580 nm
30 dB
Output Power
2.0 dBm
7.0 dBm
10Gigabit Transmitter Specifications
Released
43 / 68
Parameter
Minimum
Typical
Maximum
Extinction Ratio
6 dB
Spectral Width (20dB)
1 nm
Dispersion Penalty
1.5 dB
-10 dB
Output power at transmit off
-39 dBm
RIN15OMA
-128 dB/Hz
Downstream Signal Rate
1.25 Gb/s
Central Wavelength
1480 nm
1490 nm
1500 nm
30 dB
Output Power
2.0 dBm
7.0 dBm
Extinction Ratio
9 dB
Spectral Width (20dB)
1 nm
Dispersion Penalty
2.3 dB
-10 dB
Output power at transmit off
-39 dBm
RIN15OMA
-115 dB/Hz
Output Eye Mask
Compliant with IEEE802.3ah
1Gigabit Transmitter Specifications
1Gigabit Receiver Specifications

Upstream Signal Rate
1.25 Gb/s
Central Wavelength
1260 nm
1310 nm
1360 nm
Sensitivity
(EOL)(1)
-29.7 dBm
Sensitivity
(BOL)(1)
-30.2 dBm
Overload
-9.3 dBm
Maximum Optical input
-5 dBm
-12 dB
Receiver Settling Time
400 ns
Reception LOS Assert
-45 dBm
Reception LOS Deassert
-31 dBm
Hysteresis continue
0.5 dB
5 dB
1260 nm
1270 nm
1280 nm
Sensitivity
-28 dBm
Overload
-6 dBm
10Gigabit Receiver Specifications

Central Wavelength
(2)
Released
44 / 68
Parameter
Minimum
Typical
Maximum
Maximum Optical input
-5 dBm
-12 dB
Receiver Settling Time
800 ns
Reception LOS Assert
-45 dBm
Reception LOS Deassert
-28 dBm
Hysteresis continue
0.5 dB
5 dB
Note
(1)
(2)
BER=10-12, ER=9 dB, PRBS 27-1, 1.25 Gb/s,1260 - 1360 nm

BER=10-3, ER=6 dB, PRBS 231-1, 10.3125 Gb/s, EOL

Table 45: Identification of the Compact optical modules
Part Number
Description
3FE 65107 AA
3FE 65107 DA
3FE 65106 AA
1 Gb/s optical Ethernet 1000Base-BX-D (compact)
3FE 66131 AA
3FE 66131 DA

Table 46: Compact optical module Operation Parameters
Parameter
Minimum
Typical
Maximum
3.135 V
3.3 V
3.465 V
3FE 65106 AA
400 mA
3FE 65107 AA
300 mA
3FE 66131 AA
400 mA
AA variants
-40C
+85C
DA variants
0C
+70C
-40C
+85C

Total Current (Icc)
Operating Temperature (case) (Topr)

Released
45 / 68
Parameter
Minimum
Typical
Maximum
3FE 65106 AA
-9.0 dBm
-3.0 dBm
3FE 65107 AA
-14.0 dBm
-8.0 dBm
3FE 66131 AA
-9.0 dBm
-3.0 dBm
Optical Isolation
30 dB
-45 dBm
3FE 65106 AA
6.0 dB
3FE 65107 AA
8.2 dB
3FE 66131 AA
8.2 dB
Optical power (Pop)
Eye Mask
3FE 65106 AA
3FE 65107 AA
3FE 66131 AA

IEEE 802.3 clause 58 compatible
260 ps
260 ps
3FE 65106 AA
1480 nm
1490 nm
1500 nm
3FE 65107 AA
1480 nm
1550 nm
1600 nm
3FE 66131 AA
1480 nm
1490 nm
1500 nm
Spectral Width (20dB) () (3FE 65106 AA and

3FE 66131 AA)
0.88 nm
Spectral Width (RMS) () (3FE 65107 AA)
4.6 nm
-120 dB/Hz
-12 dB
12 dB
3FE 65106 AA
-22 dBm
-19.5 dBm
3FE 65107 AA
-29.5 dBm
-28.2 dBm
3FE 66131 AA
-22 dBm
-19.5 dBm
-24 dBm
-22 dBm
3FE 65106 AA
-3.0 dBm
3FE 65107 AA
-8.0 dBm
3FE 66131 AA
-3.0 dBm
0 dBm
Mean Wavelength ()
Receiver Specifications
(1000BASEBX10-D)
3FE 66131 AA
(100BASEBX10-D)
Receiver Overload
Released
46 / 68
Parameter
Minimum
Typical
Maximum
3FE 65106 AA
1260 nm
1360 nm
3FE 65107 AA
1260 nm
1360 nm
3FE 66131 AA
1260 nm
1360 nm
-35 dBm
3FE 65106 AA
-22.5 dBm
3FE 65107 AA
-30.0 dBm
3FE 66131 AA
-22.5 dBm
LOS hysteresis
0.5 dB
-12 dB
Wavelength ()
LOS Assert
LOS De-assert
PX20+ optical module for optical connections

Table 47: Identification of the PX20+ optical modules
Part Number
Description
3FE 53606 AA
1 Gb/s optical Ethernet 1000Base-PX20+
3FE 66282 AA
1 Gb/s optical Ethernet 1000Base-PX20+, with embedded OTDR

Table 48: PX20+ optical module Operation Parameters
Parameter
Minimum
Typical
Maximum
Supply Voltage (Vcc)
3.14 V
3.3 V
3.46 V
Total Current (Icc)
400 mA
Industrial Operating Temperature (case) (Topr)
40C
+85C
Commercial Operating Temperature (case)

(Topr)
0 C
+70C
40C
+85C
Operating Relative Humidity (at 40C noncondensing)
10% RH
90% RH
ESD Sensitivity (general)
1000 V
Data Rate (DR)
1250 Mbps
+2.5 dBm
+7 dBm
Optical power (Po)
Released
47 / 68
Parameter
Minimum
Typical
Maximum
Average launch power of off Tx (Poff)
-39 dBm
Extinction ratio (ER)
9.0 dB
Eye mask
IEEE802.3ah
Optical Rise Time (20% to 80% values) (Ton)
512 ns
Optical Fall Time (20% to 80% values) (Toff)
512 ns
Mean wavelength ()
1480 nm
1490 nm
1500nm
Spectral width (20 dB) ()
0.1 nm
1.0 nm
-10 dB
Reflection tolerance
15 dB
-30 dBm
+4 dBm
Receiver Overload
6 dBm
Wavelength c
1260 nm
1310 nm
1360 nm
LOS Assert
45 dBm
LOS De-assert
-33 dBm
LOS Hysteresis
0.5 dB
6 dB
Receiver reflectance
-10 dB
Receiver Specifications
Ethernet optical modules for electrical connections

The ISAM supports the following Ethernet optical modules for electrical connections:
100Base-T

Table 49: Identification of the 100Base-T optical modules
Part Number
Description
3FE 63343 AA
10 Mb/s and 100 Mb/s electrical Ethernet 100Base-T
Table 50 and Table 51 lists the parameters.
Released
48 / 68

Table 50: Electrical 100Base-T Transceiver Specifications
Description
100Base-T
Connector type
RJ45
Electrical cable type
Category 5 UTP
Operating temperature range
0 to 70C
Cable Length
100 m
Supported standards
IEEE802.3, 10Base-T and 100Base-T
Line Frequency (5-level encoding, per IEEE 802.3)
125 Mhz
TX Output Impedance
100
RX Input Impedance
100
Data rate
100 Mb/s
Table 51: Electrical 100Base-T optical module parameters

Parameter
Minimum
Maximum
Storage temperature
-40C
+85C
3.3 V Power Supply
0V
+3.6 V
Input voltage
0V
Vcc
Operating Case temperature
0C
+70C
3.3 V Power Supply
3.13 V
3.47 V
Operating Humidity Range
5%
90%
3.0ns
Operating Conditions
Receiver Electrical Specifications

Rise/Fall Time (20% to 80%)
1000Base-T

Table 52: Identification of the 1000Base-T optical modules
Part Number
Description
3FE 28784 AA
3FE 64927 AA
Table 53 and Table 54 list the parameters.
Released
49 / 68

Table 53: Electrical 1000Base-T Transceiver Specifications
Description
1000Base-T
Connector type
RJ45
Electrical cable type
Category 5 UTP
3FE 28784 AA
0 to 85C
3FE 64927 AA
-40 to 85C
Cable Length
100 m
Line Frequency (5-level encoding, per IEEE 802.3)
125 Mhz
TX Output Impedance
100
RX Input Impedance
100
Data rate
10 Mb/s, 100 Mb/s, 1000 Mb/s
Table 54: Electrical 1000Base-T optical module parameters

Parameter
Minimum
Maximum
Storage temperature
-40C
+85C
3.3 V Power Supply
0V
+4.0V
Input voltage
0V
Vcc
3FE 28784 AA
0C
+85C
3FE 64927 AA
-40C
+85C
3.3 V Power Supply
3.135 V
3.465 V
5%
95%
500 ps
Operating Case temperature

Rise/Fall Time (20% to 80%)

Table 55: Identification of the E1 Ethernet bridging optical modules
Part Number
Description
3FE 61681 AA
Released
50 / 68

Table 56: E1 Ethernet bridging SFP Transceiver Specifications
Parameter
Value
Electrical cable
120 , balanced
-40C to +70C
Cable Length (22 AWG wire)
Maximum 2500 meter
Supported standards
G.703, G.704, G.775, G.823
Line coding
HDB3, AMI
TX Output Impedance
120
RX Input Impedance
120
Data rate
2.048 Mb/s
Table 57: E1 Ethernet bridging optical module parameters

Parameter
Minimum
Maximum
0V
+4.0 V
Input voltage
0V
Vcc
-40C
+70C
Power Supply Voltage
3.17 V
3.46 V
-40C
+70C
5%
90%
500 ps

Rise/Fall Time (20% to 80%)(1)
Notes
(1)
Meets MSA # INF-8074 Specification (min. 500 mV - max. 2000 mV)
(2)
As specified in the 1000Base-X standard eye diagram

Table 58: Identification of the E1/T1 TDM pseudowire optical modules
Part Number
Description
3FE 67231 AA
Released
51 / 68

Table 59: E1/T1 TDM pseudowire SFP specifications
Specification
Value
E1 Interface
Number of ports
Compliance
ITU I.431, G.703, G.736, G.775 and G.823
Data Rate
2.048 Mbps (per port)
Line Encoding
HDB3
Jitter and Wander Performance
Per ITU-T G.823
Framing
Framed, unframed
Line impedance
120 balanced, 75 unbalanced
Cable Type
Maximum Cable Length (24 AWG wire)

Connector
Balanced: S-FTP Cat5 (shielded, twisted-pair)

Unbalanced: Coax
Short Haul: 500 m
Long Haul: 2100 m
RJ-45
T1 Interface
Number of ports
Compliance
ANSI T1.102, T1.403 and T1.408, AT&T Pub 62411
Data Rate
1.544 Mbps (per port)
Line Encoding
B8ZS
Jitter and Wander Performance
Per ITU-T G.824, AT&T TR-62411
Framing
Framed, unframed
Line impedance
100, balanced
Cable Type
S-FTP Cat5 (shielded, twisted-pair)
Maximum Cable Length (24 AWG wire)
Connector
RJ-45
Short Haul: 450 m

Long Haul: 1650 m
Ethernet Interface
Compliance
IEEE 802.3
Edge Connector
SFP-based, MSA-compliant
Pseudowire connections
Standard Compliance
MEF8
Number of PW connections
2 (1 per port)
Environmental
Operating Temperature Range
-40C / +85C (cold start guaranteed at -20C)
Storage Temperature Range
-40C / +75C
Released
52 / 68
Specification
Value
Humidity Range
0% to 95% humidity, non-condensing
General
Power Consumption
Typical:
1,4 W
Maximum:
1,52 W
Power Supply
3.3V, up to 325 mA
Table 60 lists the available patch cords for the E1/T1 TDM pseudowire SFP.
Table 60: Patch cords
Part number
Product
Description
3CC 52174 AC
PATCH CORD
S-FTP Cat5 2xE1 RJ45 plug to 1xE1 2RJ45 plug Cross

cable, L= 10 m
1xRJ45 - 2xRJ45
3CC 52192 AA
PATCH CORD
1xRJ45 - 4xCOAX
3FE 67624 AB
PATCH CORD
Angled 1xRJ45 - 2xRJ45
3FE 67624 AC
PATCH CORD
Angled 1xRJ45 - 2xRJ45
S-FTP Cat5 1xRJ45 plug to 4 free coax wires 2xE1, L=

10 m
S-FTP Cat5 2xE1 Angle molded RJ45 plug to 1xE1
2RJ45 plug Cross cable, L= 5 m
S-FTP Cat5 2xE1 Angle molded RJ45 plug to 1xE1
2RJ45 plug Cross cable, L= 10 m

Part Number
Description
3FE 61682 AA

Table 62: E3 Ethernet bridging SFP Transceiver Specifications
Parameter
Value
Connector type
DIN 1.0/2.3
Electrical cable
75 Ohm, coax
-40C to +75C
Cable Length (22 AWG wire)
Maximum 275 m
Supported standards
G.703, G.775, G.823, G.832, G.751
Released
53 / 68
Parameter
Value
Line coding
HDB3, AMI
TX Output Impedance
75
RX Input Impedance
75
Data rate
34.368 Mbps
Framing
Framed (G.832, G.751)/Unframed
Table 63: E3 Ethernet bridging optical module parameters

Parameter
Minimum
Maximum
0V
+4.0 V
Input voltage
0V
Vcc
-40C
+85C
Power Supply Voltage
3.17 V
3.46 V
-40C
+75C
5%
90%
500 ps

Rise/Fall Time (20% to 80%)(2)
Notes
(1)
Meets MSA # INF-8074 Specification (min. 500 mV - max. 2000 mV)
(2)
As specified in the 1000Base-X standard eye diagram
STM-1/OC3 Ethernet bridging optical module

Part Number
Description
3FE 66247 AA
STM-1/OC3 Ethernet bridging SFP
Released
54 / 68

Table 65: STM-1/OC3 Ethernet bridging optical module parameters
Parameter
Minimum
Typical
Maximum
-40C
+70C
Supply voltage
0V
+4.0V
Input voltage
0V
+4.0V
Operating data rate
155.52 Mb/s
-15.0 dBm
-8.0 dBm
1260 nm
1310 nm
1360 nm
7.7 nm
Optical Rise/Fall Time (10% to 90%)
0.6 ns
3.0 ns
Extinction ratio
8.2 dB
-35.0 dBm

Storage temperature
Receiver Performance Specifications
Center wavelength

Compliant with OC-3/STM-1 eye mask (GR253-CORE and G.957)
Transmitter Performance Specifications

Operating data rate
155.52 Mb/s
Minimum input optical power (10-11 BER)
-28.0 dBm
Maximum input optical power (10-12 BER)
-8.0 dBm
-28.0 dBm
-35.0 dBm
0.5 dB
1260 nm
1360 nm
LOS thresholds
LOS timing delay
LOS Hysteresis
Physical description
100Base- BX-D, 100Base-BX-U

Figure 1 shows a 100Base-BX-D. The 100Base-BX-U is similar in appearance.
Released
55 / 68

Figure 1: 100Base- BX-D
100Base- LX with SGMII, 1000Base-PX20-U

Figure 2 shows a 100Base- LX with SGMII.
Figure 2: 100Base- LX with SGMII
74.1
26.1
12.5
2.0
2.0
13.4
Released
56 / 68

100Base- LX, 100Base-FX, 1000Base-EX, 1000Base-LX, 1000Base-SX,
1000Base-VX CWDM, 1000Base-YX CWDM, 1000Base-ZR, 1000BaseZR CWDM, 1000Base-ZX, 2500Base-LX, 2500Base-SX
Figure 3 shows a 1000Base-VX CWDM. The 1000Base-YX CWDM is similar in
appearance.
Figure 3: 1000Base-VX CWDM
1000Base-BX10-U, 1000Base-BX10-D, 1000Base-BX40-U, 1000BaseBX40-D, 2500Base-BX Ethernet SFP

Figure 4 shows a 1000Base-BX10-U. The 1000Base-BX10-D, 1000Base-BX40-U,
1000Base-BX40-D and 2500Base-BX Ethernet SFP are similar in appearance.
Released
57 / 68

Figure 4: 1000Base-BX10-U
10Gigabit Ethernet SFP+

Figure 6 shows a 10Gigabit Ethernet SFP+.
Figure 5: 10Gigabit Ethernet SFP+
10GBase-ER, 10GBase-LR
Figure 6 shows a 10GBase-ER. The 10GBase-LR is similar in appearance.
Released
58 / 68

Figure 6: 10GBase-ER
GPON OLT SFP

Figure 7 shows the GPON OLT SFP optical module without embedded OTDR
dimensions.
Released
59 / 68

Figure 7: without embedded OTDR Dimensions
13.4 mm
Top view
65.53 mm
3 mm
8.5 mm
Front view
Side view
2.5 mm
10Gigabit EPON OLT XFP

Figure 8 shows the 10Gigabit EPON OLT XFP.
Released
60 / 68

Figure 8: 10Gigabit EPON OLT XFP
Compact SFP
Figure 9 shows a compact SFP.
Figure 9: Compact SFP
Released
61 / 68

PX20+ SFP
Figure 10 shows the PX20+ SFP.
Figure 10: PX20+ SFP
31
14.1
11.2
13.4
6.05
0.55+- 0.05
12.75 11.2
8.5
0.4
61.8
63
2.5+- 0.05
45+- 0.28
13.7
41.8+- 0.15
21716
100Base-T
Figure 11 shows a 100Base-T electrical SFP.
Released
62 / 68

Figure 11: 100Base-T
1000Base-T
Figure 12 shows a 1000Base-T electrical SFP.
Figure 12: 1000Base-T
Released
63 / 68

Figure 13 shows an E1 Ethernet bridging SFP.
Figure 13: E1 Ethernet bridging SFP
74.1
26.1
12.5
2.0
2.0
13.4

Figure 3 shows the E1/T1 TDM pseudowire SFP.
Released
64 / 68

Figure 14: E1/T1 TDM pseudowire SFP

Figure 15 shows an E3 Ethernet bridging SFP.
Figure 15: E3 Ethernet bridging SFP
79
69.5
21.5
12.4
2.0
2.0
14
13.4
Released
65 / 68

STM-1/OC3 Ethernet Bridging SFP
Figure 16 shows the STM-1/OC3 Ethernet Bridging SFP.
Figure 16: STM-1/OC3 Ethernet Bridging SFP
Released
66 / 68

6
Labeling Information
The SFP module has a custom label located on the top of the SFP with the specifications
given in Figure 17.
Figure 17: Identification Label
Alcatel-Lucent logo
Alcatel-Lucent Part No.
Class 1 Laser
This area reserved
for Agency marks,
Safety Warnings and
Country of Origin.
ICS
Model No: 3FE01234AA XX

Part description
MFGR P/N: 1234567890
MFGR S/N: XXXXYYDDDDSSSS
Part description is defined

by the unique ALU customization
specification under the sellable
part number.
Manufacturer Part/Model No.
Manufacturer Serial No.
Made In USA
Manufacturer Serial No. Bar-Code

(regular code 128 density)
The MFGR Serial No. is XXXXYYDDDDSSSS where
XXXX is the company ID

YY is the location
DDDD is a date code in YYWW format
SSSS is the serial number.
External interfaces
Optical modules do not have any LEDs, but there may be associated LEDs on the
equipment in which they are installed. The optical module and its connector are
accessible from the faceplate of the card in which the optical module is installed.
Power
An optical module receives power from the equipment in which it is installed.
Released
67 / 68
Released
68 / 68

3HH11206AAAATQZZA03

Uploaded by

Copyright:

Available Formats

3HH11206AAAATQZZA03

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

3HH11206AAAATQZZA03

Uploaded by

Copyright:

Available Formats

What are the different types of optical modules described in the document?

What are the different types of optical modules described in the document?

How are the optical modules labeled and identified?

How are the optical modules labeled and identified?

SFP / SFP+ / XFP modules

3 Features and Application Notes

3HH 11206 AAAA TQZZA Ed 03

SFP / SFP+ / XFP modules

100 Mb/s optical Ethernet 100Base-BX-D

100 Mb/s optical Ethernet 100Base-BX-U

100 Mb/s optical Ethernet 100Base-FX

100 Mb/s optical Ethernet 100Base-LX

100 Mb/s optical Ethernet 100Base-LX with SGMII interface

1 Gb/s optical Ethernet 1000Base-BX10-U

1 Gb/s optical Ethernet 1000Base-BX10-D

1 Gb/s optical Ethernet 1000Base-BX40-U

1 Gb/s optical Ethernet 1000Base-BX40-D

1 Gb/s optical Ethernet 1000Base-EX

1 Gb/s optical Ethernet 1000Base-LX

1 Gb/s optical Ethernet 1000Base-PX20-U

1 Gb/s optical Ethernet 1000Base-PX20+

1 Gb/s optical Ethernet 1000Base-PX20+, with embedded OTDR

1 Gb/s optical Ethernet 1000Base-SX

1 Gb/s optical Ethernet 1000Base-SX

1 Gb/s optical Ethernet 1000Base-VX CWDM (32 dB) 1471 nm

1 Gb/s optical Ethernet 1000Base-VX CWDM (32 dB) 1491 nm

1 Gb/s optical Ethernet 1000Base-VX CWDM (32 dB) 1511 nm

1 Gb/s optical Ethernet 1000Base-VX CWDM (32 dB) 1531 nm

1 Gb/s optical Ethernet 1000Base-VX CWDM (32 dB) 1551 nm

1 Gb/s optical Ethernet 1000Base-VX CWDM (32 dB) 1571 nm

1 Gb/s optical Ethernet 1000Base-VX CWDM (32 dB) 1591 nm

1 Gb/s optical Ethernet 1000Base-VX CWDM (32 dB) 1611 nm

1 Gb/s optical Ethernet 1000Base-VX CWDM (32 dB) 1491 nm

1 Gb/s optical Ethernet 1000Base-YX CWDM (24 dB) 1471 nm

1 Gb/s optical Ethernet 1000Base-YX CWDM (24 dB) 1491 nm

1 Gb/s optical Ethernet 1000Base-YX CWDM (24 dB) 1511 nm

1 Gb/s optical Ethernet 1000Base-YX CWDM (24 dB) 1531 nm

3HH 11206 AAAA TQZZA Ed 03

SFP / SFP+ / XFP modules

1 Gb/s optical Ethernet 1000Base-YX CWDM (24 dB) 1551 nm

1 Gb/s optical Ethernet 1000Base-YX CWDM (24 dB) 1571 nm

1 Gb/s optical Ethernet 1000Base-YX CWDM (24 dB) 1591 nm

1 Gb/s optical Ethernet 1000Base-YX CWDM (24 dB) 1611 nm

1 Gb/s optical Ethernet 1000Base-VX CWDM (32 dB) 1471 nm

1 Gb/s optical Ethernet 1000Base-ZX

1 Gb/s optical Ethernet 1000Base-ZX

1 Gb/s or 2.5 Gb/s optical Ethernet 2500Base-BX-U

1 Gb/s or 2.5 Gb/s optical Ethernet 2500Base-BX-D

1 Gb/s or 2.5 Gb/s optical Ethernet 2500Base-SX

1 Gb/s or 2.5 Gb/s optical Ethernet 2500Base-LX

10 Gb/s optical Ethernet 10GBase-LR

10 Gb/s optical Ethernet 10GBase-LR

10 Gb/s optical Ethernet 10GBase-LR

10 Gb/s optical Ethernet 10GBase-LR

10 Gb/s optical Ethernet 10GBase-SR

10 Gb/s optical Ethernet 10GBase-SR

10 Gb/s optical Ethernet 10GBase-ER

10 Gb/s optical Ethernet 10GBase-ZR

10 Gb/s optical Ethernet 10GBase-ZR DWDM

10 Gb/s optical Ethernet 10GBase-ZR DWDM