Note Chapter5-DF014 Student
Note Chapter5-DF014 Student
Learning Outcome
5.1 Angular parameters (1 hour)
v1red2π
a=
36°0
08°163
5 rd1a= 6
3. It is a ___________________.
___________________.
4. The unit of angular velocity is _______________________
5. Other units are ________________________________________
9 10
Solution :
11 12
PHYSICS CHAPTER 4 PHYSICS CHAPTER 4
Example 3: Solution :
If the angular the displacement, θ of rotating wheel is given by (i) t1 = 3.0 s and t2 = 5.0 s
t3
θ = 2π +
4
determine,
(i) the average angular velocity at time t1 = 3.0 s and t2 = 5.0 s
(ii) instantaneous angular velocity at time t = 5.0 s
(ii) ω at t = 5.0 s
13 14
i. Definition i. Definition
Average angular acceleration, αAV is defined ________ Instantaneous angular acceleration is defined __________
____________________________________________. ____________________________________________.
ii. Equation :
ii. Equation :
where
ω2 : final angular velocity
ω1 : initial angular velocity
∆t : time interval 15 16
PHYSICS CHAPTER 4 PHYSICS CHAPTER 4
5.1.3 Angular Acceleration (cont…..) Example 4:
17 18
Solution:
19 20
PHYSICS CHAPTER 4 PHYSICS CHAPTER 4
Exercise 5.1: Exercise 5.1:
1. The angular position θ of the blade of a fan is given by
(
θ = 2.5 rad s -1 t 2) 3. A particle moves along a circular path of radius 3.0 m with an
angular velocity 20 rad s-1.
Determine the angle θ, in radians and in degrees, at times
Calculate,
a. t1 = 1.0 s and
a. the angular velocity in revolutions per second
b. t2 = 3.0 s
b. the time for one revolution
Ans: 0.5 rad, 28.6º; 4.5 rad, 257.8º
c. displacement in one minute
2. If a disc 30 cm in diameter rolls 65 m along a straight line without
slipping, calculate Ans: 3.2 rev s-1; 0.31 s; 1200 rad
When the rigid body is rotating , every particle of the rigid The ___________of the _____________________ always
body moves in a circle about rotation axis as shown in the ____________________________.
Figure 5.2. 25 26
the magnitude,
and
29 30
31 32
PHYSICS CHAPTER 4 PHYSICS CHAPTER 4
Example 7: Solution:
A wheel of radius 500 mm is spinning at a constant angular a.
velocity of
t3
ω = 2 t2 + b.
3
Determine
a. angular acceleration at time, t = 2.0 minute
b. the velocity of the wheel at t = 3.0 s
c.
c. the tangential linear acceleration and centripetal acceleration
at t = 2.0 s
33 34
ANS. : 13.6 rad s−2 Use equations for rotational motion with constant
angular acceleration
ω = ω0 + αt
1
θ = ω0 t + αt 2
2
2 2
ω = ω0 + 2αθ
Linear Angular
ω = ω0 + αt ω 2 = ω 02 + 2αθ Motion Motion
1
θ = ω0t + αt 2
2
Table 5.1
39 40
PHYSICS CHAPTER 4 PHYSICS CHAPTER 4
5.3.1 Rotational motion with uniform angular Example 9:
acceleration (cont….) The tires of a car make 85 revolutions as the car reduces its speed
uniformly from 90.0 km h-1 to 60.0 km h-1. The tires have a diameter of
Table 5.2 shows the comparison of linear and rotational
0.90 m. Determine the angular acceleration.
motion with constant acceleration.
Linear motion Angular motion Solution:
Table 5.2
where θ in radian.
41 42
No. 9.26, pg. 354, University Physics with Modern Physics,11th edition, Young & Freedman.
43 44
PHYSICS CHAPTER 4 PHYSICS CHAPTER 4
Example 11: Example 12:
The initial angular velocity of a body which rotates with uniform A wheel rotates with uniform angular acceleration of 0.50 rad s-2.
angular accelerations is 11 rad s-1. After 2.0 s, its angular velocity
is 19 rad s-1. Calculate the (a) what is the time taken for its angular velocity to increase from
2.0 rad s-1 to 3.0 rad s-1.
(a) angular acceleration
(b) what is the angular displacement in this time?
(b) angular displacement after 2.0 s.
Solution :
Solution:
(a)
(a)
45 46
47 48
PHYSICS CHAPTER 4 PHYSICS CHAPTER 4
Example 15: Example 16:
A spinning tire initially has an angular velocity of 30 rad s-1, 20 s (a) Through how many revolutions must the 55 cm diameter
later its angular velocity is 45 rad s-1. If the angular acceleration tire of a truck turn as the truck travels 3.5 km?
is constant, determine
(b) A CD turntable rotating at 9.0 rad s-1 slows uniformly to a
(a) the magnitude of the angular acceleration stop in 8 rev. Calculate the angular acceleration in rad s-2.
(b) the angular displacement over 25 s
Solution:
(c) the angular speed at 35 s
(a)
Solution:
(a)
49 50
1. A wheel rotates with a constant angular acceleration of 3.50 2. A bicycle wheel is being tested at a repair shop. The angular
rad s-2. velocity of the wheel is 4.00 rad s-1 at time t = 0 , and its angular
a. If the angular speed of the wheel is 2.00 rad s-1 at t = 0 s, acceleration is constant and equal to -1.20 rad s-2. A spoke OP
through what angular displacement does the wheel rotate on the wheel coincides with the + x-axis at time t = 0 as shown in
in 2.00 s. figure below.
b. Through how many revolutions has the wheel turned a. What is the wheel’s angular velocity
during this time interval? y at t = 3.00 s?
c. What is the angular speed of the wheel at t = 2.00 s? b. What angle in degree does the spoke
OP make with the + x-axis at this
pg. 297,Physics for scientists and engineers with modern physics, Serway & P x time?
Jewett,6th edition. O
Ans. : 0.40 rad s-1, 18°
18°
rad, 1.75 rev, 9.00 rad s-1
Ans. : 11.0 rad,
51 52
PHYSICS CHAPTER 4 PHYSICS CHAPTER 4
Exercise 5.3
3. A phonograph turntable initially rotating at 3.5 rad s-1 makes three
complete rotations before coming to a stop.
a. What is its angular acceleration?
b. How much time does it take to come to a stop? THE END…
pg. 121, College Matriculation Physics Semester I , Higher Learning Publication Sdn. Bhd.